Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1 | /* |
| 2 | * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver |
| 3 | * |
| 4 | * Copyright (c) 2008-2009 PMC-Sierra, Inc., |
| 5 | * All rights reserved. |
| 6 | * |
| 7 | * Redistribution and use in source and binary forms, with or without |
| 8 | * modification, are permitted provided that the following conditions |
| 9 | * are met: |
| 10 | * 1. Redistributions of source code must retain the above copyright |
| 11 | * notice, this list of conditions, and the following disclaimer, |
| 12 | * without modification. |
| 13 | * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| 14 | * substantially similar to the "NO WARRANTY" disclaimer below |
| 15 | * ("Disclaimer") and any redistribution must be conditioned upon |
| 16 | * including a substantially similar Disclaimer requirement for further |
| 17 | * binary redistribution. |
| 18 | * 3. Neither the names of the above-listed copyright holders nor the names |
| 19 | * of any contributors may be used to endorse or promote products derived |
| 20 | * from this software without specific prior written permission. |
| 21 | * |
| 22 | * Alternatively, this software may be distributed under the terms of the |
| 23 | * GNU General Public License ("GPL") version 2 as published by the Free |
| 24 | * Software Foundation. |
| 25 | * |
| 26 | * NO WARRANTY |
| 27 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 28 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 29 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| 30 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 31 | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 32 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| 33 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| 34 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| 35 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| 36 | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| 37 | * POSSIBILITY OF SUCH DAMAGES. |
| 38 | * |
| 39 | */ |
| 40 | #include <linux/slab.h> |
| 41 | #include "pm8001_sas.h" |
| 42 | #include "pm80xx_hwi.h" |
| 43 | #include "pm8001_chips.h" |
| 44 | #include "pm8001_ctl.h" |
| 45 | |
| 46 | #define SMP_DIRECT 1 |
| 47 | #define SMP_INDIRECT 2 |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 48 | |
| 49 | |
| 50 | int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value) |
| 51 | { |
| 52 | u32 reg_val; |
| 53 | unsigned long start; |
| 54 | pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, shift_value); |
| 55 | /* confirm the setting is written */ |
| 56 | start = jiffies + HZ; /* 1 sec */ |
| 57 | do { |
| 58 | reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER); |
| 59 | } while ((reg_val != shift_value) && time_before(jiffies, start)); |
| 60 | if (reg_val != shift_value) { |
| 61 | PM8001_FAIL_DBG(pm8001_ha, |
| 62 | pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER" |
| 63 | " = 0x%x\n", reg_val)); |
| 64 | return -1; |
| 65 | } |
| 66 | return 0; |
| 67 | } |
| 68 | |
| 69 | void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset, |
| 70 | const void *destination, |
| 71 | u32 dw_count, u32 bus_base_number) |
| 72 | { |
| 73 | u32 index, value, offset; |
| 74 | u32 *destination1; |
| 75 | destination1 = (u32 *)destination; |
| 76 | |
| 77 | for (index = 0; index < dw_count; index += 4, destination1++) { |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 78 | offset = (soffset + index); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 79 | if (offset < (64 * 1024)) { |
| 80 | value = pm8001_cr32(pm8001_ha, bus_base_number, offset); |
| 81 | *destination1 = cpu_to_le32(value); |
| 82 | } |
| 83 | } |
| 84 | return; |
| 85 | } |
| 86 | |
| 87 | ssize_t pm80xx_get_fatal_dump(struct device *cdev, |
| 88 | struct device_attribute *attr, char *buf) |
| 89 | { |
| 90 | struct Scsi_Host *shost = class_to_shost(cdev); |
| 91 | struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); |
| 92 | struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; |
| 93 | void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr; |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 94 | u32 accum_len , reg_val, index, *temp; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 95 | u32 status = 1; |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 96 | unsigned long start; |
| 97 | u8 *direct_data; |
| 98 | char *fatal_error_data = buf; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 99 | u32 length_to_read; |
| 100 | u32 offset; |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 101 | |
| 102 | pm8001_ha->forensic_info.data_buf.direct_data = buf; |
| 103 | if (pm8001_ha->chip_id == chip_8001) { |
| 104 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 105 | sprintf(pm8001_ha->forensic_info.data_buf.direct_data, |
| 106 | "Not supported for SPC controller"); |
| 107 | return (char *)pm8001_ha->forensic_info.data_buf.direct_data - |
| 108 | (char *)buf; |
| 109 | } |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 110 | /* initialize variables for very first call from host application */ |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 111 | if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) { |
| 112 | PM8001_IO_DBG(pm8001_ha, |
| 113 | pm8001_printk("forensic_info TYPE_NON_FATAL..............\n")); |
| 114 | direct_data = (u8 *)fatal_error_data; |
| 115 | pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL; |
| 116 | pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 117 | pm8001_ha->forensic_info.data_buf.direct_offset = 0; |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 118 | pm8001_ha->forensic_info.data_buf.read_len = 0; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 119 | pm8001_ha->forensic_preserved_accumulated_transfer = 0; |
| 120 | |
| 121 | /* Write signature to fatal dump table */ |
| 122 | pm8001_mw32(fatal_table_address, |
| 123 | MPI_FATAL_EDUMP_TABLE_SIGNATURE, 0x1234abcd); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 124 | |
| 125 | pm8001_ha->forensic_info.data_buf.direct_data = direct_data; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 126 | PM8001_IO_DBG(pm8001_ha, |
| 127 | pm8001_printk("ossaHwCB: status1 %d\n", status)); |
| 128 | PM8001_IO_DBG(pm8001_ha, |
| 129 | pm8001_printk("ossaHwCB: read_len 0x%x\n", |
| 130 | pm8001_ha->forensic_info.data_buf.read_len)); |
| 131 | PM8001_IO_DBG(pm8001_ha, |
| 132 | pm8001_printk("ossaHwCB: direct_len 0x%x\n", |
| 133 | pm8001_ha->forensic_info.data_buf.direct_len)); |
| 134 | PM8001_IO_DBG(pm8001_ha, |
| 135 | pm8001_printk("ossaHwCB: direct_offset 0x%x\n", |
| 136 | pm8001_ha->forensic_info.data_buf.direct_offset)); |
| 137 | } |
| 138 | if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) { |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 139 | /* start to get data */ |
| 140 | /* Program the MEMBASE II Shifting Register with 0x00.*/ |
| 141 | pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, |
| 142 | pm8001_ha->fatal_forensic_shift_offset); |
| 143 | pm8001_ha->forensic_last_offset = 0; |
| 144 | pm8001_ha->forensic_fatal_step = 0; |
| 145 | pm8001_ha->fatal_bar_loc = 0; |
| 146 | } |
Viswas G | cf37006 | 2013-12-10 10:31:38 +0530 | [diff] [blame] | 147 | |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 148 | /* Read until accum_len is retrived */ |
| 149 | accum_len = pm8001_mr32(fatal_table_address, |
| 150 | MPI_FATAL_EDUMP_TABLE_ACCUM_LEN); |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 151 | /* Determine length of data between previously stored transfer length |
| 152 | * and current accumulated transfer length |
| 153 | */ |
| 154 | length_to_read = |
| 155 | accum_len - pm8001_ha->forensic_preserved_accumulated_transfer; |
| 156 | PM8001_IO_DBG(pm8001_ha, |
| 157 | pm8001_printk("get_fatal_spcv: accum_len 0x%x\n", accum_len)); |
| 158 | PM8001_IO_DBG(pm8001_ha, |
| 159 | pm8001_printk("get_fatal_spcv: length_to_read 0x%x\n", |
| 160 | length_to_read)); |
| 161 | PM8001_IO_DBG(pm8001_ha, |
| 162 | pm8001_printk("get_fatal_spcv: last_offset 0x%x\n", |
| 163 | pm8001_ha->forensic_last_offset)); |
| 164 | PM8001_IO_DBG(pm8001_ha, |
| 165 | pm8001_printk("get_fatal_spcv: read_len 0x%x\n", |
| 166 | pm8001_ha->forensic_info.data_buf.read_len)); |
| 167 | PM8001_IO_DBG(pm8001_ha, |
| 168 | pm8001_printk("get_fatal_spcv:: direct_len 0x%x\n", |
| 169 | pm8001_ha->forensic_info.data_buf.direct_len)); |
| 170 | PM8001_IO_DBG(pm8001_ha, |
| 171 | pm8001_printk("get_fatal_spcv:: direct_offset 0x%x\n", |
| 172 | pm8001_ha->forensic_info.data_buf.direct_offset)); |
| 173 | |
| 174 | /* If accumulated length failed to read correctly fail the attempt.*/ |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 175 | if (accum_len == 0xFFFFFFFF) { |
| 176 | PM8001_IO_DBG(pm8001_ha, |
| 177 | pm8001_printk("Possible PCI issue 0x%x not expected\n", |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 178 | accum_len)); |
| 179 | return status; |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 180 | } |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 181 | /* If accumulated length is zero fail the attempt */ |
| 182 | if (accum_len == 0) { |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 183 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 184 | sprintf(pm8001_ha->forensic_info.data_buf.direct_data, |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 185 | "%08x ", 0xFFFFFFFF); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 186 | return (char *)pm8001_ha->forensic_info.data_buf.direct_data - |
| 187 | (char *)buf; |
| 188 | } |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 189 | /* Accumulated length is good so start capturing the first data */ |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 190 | temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr; |
| 191 | if (pm8001_ha->forensic_fatal_step == 0) { |
| 192 | moreData: |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 193 | /* If data to read is less than SYSFS_OFFSET then reduce the |
| 194 | * length of dataLen |
| 195 | */ |
| 196 | if (pm8001_ha->forensic_last_offset + SYSFS_OFFSET |
| 197 | > length_to_read) { |
| 198 | pm8001_ha->forensic_info.data_buf.direct_len = |
| 199 | length_to_read - |
| 200 | pm8001_ha->forensic_last_offset; |
| 201 | } else { |
| 202 | pm8001_ha->forensic_info.data_buf.direct_len = |
| 203 | SYSFS_OFFSET; |
| 204 | } |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 205 | if (pm8001_ha->forensic_info.data_buf.direct_data) { |
| 206 | /* Data is in bar, copy to host memory */ |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 207 | pm80xx_pci_mem_copy(pm8001_ha, |
| 208 | pm8001_ha->fatal_bar_loc, |
| 209 | pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr, |
| 210 | pm8001_ha->forensic_info.data_buf.direct_len, 1); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 211 | } |
| 212 | pm8001_ha->fatal_bar_loc += |
| 213 | pm8001_ha->forensic_info.data_buf.direct_len; |
| 214 | pm8001_ha->forensic_info.data_buf.direct_offset += |
| 215 | pm8001_ha->forensic_info.data_buf.direct_len; |
| 216 | pm8001_ha->forensic_last_offset += |
| 217 | pm8001_ha->forensic_info.data_buf.direct_len; |
| 218 | pm8001_ha->forensic_info.data_buf.read_len = |
| 219 | pm8001_ha->forensic_info.data_buf.direct_len; |
| 220 | |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 221 | if (pm8001_ha->forensic_last_offset >= length_to_read) { |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 222 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 223 | sprintf(pm8001_ha->forensic_info.data_buf.direct_data, |
| 224 | "%08x ", 3); |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 225 | for (index = 0; index < |
| 226 | (pm8001_ha->forensic_info.data_buf.direct_len |
| 227 | / 4); index++) { |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 228 | pm8001_ha->forensic_info.data_buf.direct_data += |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 229 | sprintf( |
| 230 | pm8001_ha->forensic_info.data_buf.direct_data, |
| 231 | "%08x ", *(temp + index)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 232 | } |
| 233 | |
| 234 | pm8001_ha->fatal_bar_loc = 0; |
| 235 | pm8001_ha->forensic_fatal_step = 1; |
| 236 | pm8001_ha->fatal_forensic_shift_offset = 0; |
| 237 | pm8001_ha->forensic_last_offset = 0; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 238 | status = 0; |
| 239 | offset = (int) |
| 240 | ((char *)pm8001_ha->forensic_info.data_buf.direct_data |
| 241 | - (char *)buf); |
| 242 | PM8001_IO_DBG(pm8001_ha, |
| 243 | pm8001_printk("get_fatal_spcv:return1 0x%x\n", offset)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 244 | return (char *)pm8001_ha-> |
| 245 | forensic_info.data_buf.direct_data - |
| 246 | (char *)buf; |
| 247 | } |
| 248 | if (pm8001_ha->fatal_bar_loc < (64 * 1024)) { |
| 249 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 250 | sprintf(pm8001_ha-> |
| 251 | forensic_info.data_buf.direct_data, |
| 252 | "%08x ", 2); |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 253 | for (index = 0; index < |
| 254 | (pm8001_ha->forensic_info.data_buf.direct_len |
| 255 | / 4); index++) { |
| 256 | pm8001_ha->forensic_info.data_buf.direct_data |
| 257 | += sprintf(pm8001_ha-> |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 258 | forensic_info.data_buf.direct_data, |
| 259 | "%08x ", *(temp + index)); |
| 260 | } |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 261 | status = 0; |
| 262 | offset = (int) |
| 263 | ((char *)pm8001_ha->forensic_info.data_buf.direct_data |
| 264 | - (char *)buf); |
| 265 | PM8001_IO_DBG(pm8001_ha, |
| 266 | pm8001_printk("get_fatal_spcv:return2 0x%x\n", offset)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 267 | return (char *)pm8001_ha-> |
| 268 | forensic_info.data_buf.direct_data - |
| 269 | (char *)buf; |
| 270 | } |
| 271 | |
| 272 | /* Increment the MEMBASE II Shifting Register value by 0x100.*/ |
| 273 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 274 | sprintf(pm8001_ha->forensic_info.data_buf.direct_data, |
| 275 | "%08x ", 2); |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 276 | for (index = 0; index < |
| 277 | (pm8001_ha->forensic_info.data_buf.direct_len |
| 278 | / 4) ; index++) { |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 279 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 280 | sprintf(pm8001_ha-> |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 281 | forensic_info.data_buf.direct_data, |
| 282 | "%08x ", *(temp + index)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 283 | } |
| 284 | pm8001_ha->fatal_forensic_shift_offset += 0x100; |
| 285 | pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, |
| 286 | pm8001_ha->fatal_forensic_shift_offset); |
| 287 | pm8001_ha->fatal_bar_loc = 0; |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 288 | status = 0; |
| 289 | offset = (int) |
| 290 | ((char *)pm8001_ha->forensic_info.data_buf.direct_data |
| 291 | - (char *)buf); |
| 292 | PM8001_IO_DBG(pm8001_ha, |
| 293 | pm8001_printk("get_fatal_spcv: return3 0x%x\n", offset)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 294 | return (char *)pm8001_ha->forensic_info.data_buf.direct_data - |
| 295 | (char *)buf; |
| 296 | } |
| 297 | if (pm8001_ha->forensic_fatal_step == 1) { |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 298 | /* store previous accumulated length before triggering next |
| 299 | * accumulated length update |
| 300 | */ |
| 301 | pm8001_ha->forensic_preserved_accumulated_transfer = |
| 302 | pm8001_mr32(fatal_table_address, |
| 303 | MPI_FATAL_EDUMP_TABLE_ACCUM_LEN); |
| 304 | |
| 305 | /* continue capturing the fatal log until Dump status is 0x3 */ |
| 306 | if (pm8001_mr32(fatal_table_address, |
| 307 | MPI_FATAL_EDUMP_TABLE_STATUS) < |
| 308 | MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) { |
| 309 | |
| 310 | /* reset fddstat bit by writing to zero*/ |
| 311 | pm8001_mw32(fatal_table_address, |
| 312 | MPI_FATAL_EDUMP_TABLE_STATUS, 0x0); |
| 313 | |
| 314 | /* set dump control value to '1' so that new data will |
| 315 | * be transferred to shared memory |
| 316 | */ |
| 317 | pm8001_mw32(fatal_table_address, |
| 318 | MPI_FATAL_EDUMP_TABLE_HANDSHAKE, |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 319 | MPI_FATAL_EDUMP_HANDSHAKE_RDY); |
| 320 | |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 321 | /*Poll FDDHSHK until clear */ |
| 322 | start = jiffies + (2 * HZ); /* 2 sec */ |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 323 | |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 324 | do { |
| 325 | reg_val = pm8001_mr32(fatal_table_address, |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 326 | MPI_FATAL_EDUMP_TABLE_HANDSHAKE); |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 327 | } while ((reg_val) && time_before(jiffies, start)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 328 | |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 329 | if (reg_val != 0) { |
| 330 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 331 | "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n", |
| 332 | reg_val)); |
| 333 | /* Fail the dump if a timeout occurs */ |
| 334 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 335 | sprintf( |
| 336 | pm8001_ha->forensic_info.data_buf.direct_data, |
| 337 | "%08x ", 0xFFFFFFFF); |
| 338 | return((char *) |
| 339 | pm8001_ha->forensic_info.data_buf.direct_data |
| 340 | - (char *)buf); |
| 341 | } |
| 342 | /* Poll status register until set to 2 or |
| 343 | * 3 for up to 2 seconds |
| 344 | */ |
| 345 | start = jiffies + (2 * HZ); /* 2 sec */ |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 346 | |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 347 | do { |
| 348 | reg_val = pm8001_mr32(fatal_table_address, |
| 349 | MPI_FATAL_EDUMP_TABLE_STATUS); |
Colin Ian King | 0e7c353 | 2019-11-20 13:50:31 +0000 | [diff] [blame] | 350 | } while (((reg_val != 2) && (reg_val != 3)) && |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 351 | time_before(jiffies, start)); |
| 352 | |
| 353 | if (reg_val < 2) { |
| 354 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 355 | "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n", |
| 356 | reg_val)); |
| 357 | /* Fail the dump if a timeout occurs */ |
| 358 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 359 | sprintf( |
| 360 | pm8001_ha->forensic_info.data_buf.direct_data, |
| 361 | "%08x ", 0xFFFFFFFF); |
| 362 | pm8001_cw32(pm8001_ha, 0, |
| 363 | MEMBASE_II_SHIFT_REGISTER, |
| 364 | pm8001_ha->fatal_forensic_shift_offset); |
| 365 | } |
| 366 | /* Read the next block of the debug data.*/ |
| 367 | length_to_read = pm8001_mr32(fatal_table_address, |
| 368 | MPI_FATAL_EDUMP_TABLE_ACCUM_LEN) - |
| 369 | pm8001_ha->forensic_preserved_accumulated_transfer; |
| 370 | if (length_to_read != 0x0) { |
| 371 | pm8001_ha->forensic_fatal_step = 0; |
| 372 | goto moreData; |
| 373 | } else { |
| 374 | pm8001_ha->forensic_info.data_buf.direct_data += |
| 375 | sprintf( |
| 376 | pm8001_ha->forensic_info.data_buf.direct_data, |
| 377 | "%08x ", 4); |
| 378 | pm8001_ha->forensic_info.data_buf.read_len |
| 379 | = 0xFFFFFFFF; |
| 380 | pm8001_ha->forensic_info.data_buf.direct_len |
| 381 | = 0; |
| 382 | pm8001_ha->forensic_info.data_buf.direct_offset |
| 383 | = 0; |
| 384 | pm8001_ha->forensic_info.data_buf.read_len = 0; |
| 385 | } |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 386 | } |
| 387 | } |
Deepak Ukey | 044f59d | 2019-11-14 15:39:10 +0530 | [diff] [blame] | 388 | offset = (int)((char *)pm8001_ha->forensic_info.data_buf.direct_data |
| 389 | - (char *)buf); |
| 390 | PM8001_IO_DBG(pm8001_ha, |
| 391 | pm8001_printk("get_fatal_spcv: return4 0x%x\n", offset)); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 392 | return (char *)pm8001_ha->forensic_info.data_buf.direct_data - |
| 393 | (char *)buf; |
| 394 | } |
| 395 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 396 | /** |
| 397 | * read_main_config_table - read the configure table and save it. |
| 398 | * @pm8001_ha: our hba card information |
| 399 | */ |
| 400 | static void read_main_config_table(struct pm8001_hba_info *pm8001_ha) |
| 401 | { |
| 402 | void __iomem *address = pm8001_ha->main_cfg_tbl_addr; |
| 403 | |
| 404 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature = |
| 405 | pm8001_mr32(address, MAIN_SIGNATURE_OFFSET); |
| 406 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev = |
| 407 | pm8001_mr32(address, MAIN_INTERFACE_REVISION); |
| 408 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev = |
| 409 | pm8001_mr32(address, MAIN_FW_REVISION); |
| 410 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io = |
| 411 | pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET); |
| 412 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl = |
| 413 | pm8001_mr32(address, MAIN_MAX_SGL_OFFSET); |
| 414 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag = |
| 415 | pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET); |
| 416 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset = |
| 417 | pm8001_mr32(address, MAIN_GST_OFFSET); |
| 418 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset = |
| 419 | pm8001_mr32(address, MAIN_IBQ_OFFSET); |
| 420 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset = |
| 421 | pm8001_mr32(address, MAIN_OBQ_OFFSET); |
| 422 | |
| 423 | /* read Error Dump Offset and Length */ |
| 424 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 = |
| 425 | pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET); |
| 426 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 = |
| 427 | pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH); |
| 428 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 = |
| 429 | pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET); |
| 430 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 = |
| 431 | pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH); |
| 432 | |
| 433 | /* read GPIO LED settings from the configuration table */ |
| 434 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping = |
| 435 | pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET); |
| 436 | |
| 437 | /* read analog Setting offset from the configuration table */ |
| 438 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset = |
| 439 | pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET); |
| 440 | |
| 441 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset = |
| 442 | pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET); |
| 443 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset = |
| 444 | pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET); |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 445 | /* read port recover and reset timeout */ |
| 446 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer = |
| 447 | pm8001_mr32(address, MAIN_PORT_RECOVERY_TIMER); |
Viswas G | 24fff01 | 2017-10-18 11:39:08 +0530 | [diff] [blame] | 448 | /* read ILA and inactive firmware version */ |
| 449 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version = |
| 450 | pm8001_mr32(address, MAIN_MPI_ILA_RELEASE_TYPE); |
| 451 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version = |
| 452 | pm8001_mr32(address, MAIN_MPI_INACTIVE_FW_VERSION); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 453 | |
| 454 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 455 | "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n", |
| 456 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature, |
| 457 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev, |
| 458 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev)); |
| 459 | |
| 460 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 461 | "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n", |
| 462 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset, |
| 463 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset, |
| 464 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset, |
| 465 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset, |
| 466 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset)); |
| 467 | |
| 468 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 469 | "Main cfg table; ila rev:%x Inactive fw rev:%x\n", |
| 470 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version, |
| 471 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 472 | } |
| 473 | |
| 474 | /** |
| 475 | * read_general_status_table - read the general status table and save it. |
| 476 | * @pm8001_ha: our hba card information |
| 477 | */ |
| 478 | static void read_general_status_table(struct pm8001_hba_info *pm8001_ha) |
| 479 | { |
| 480 | void __iomem *address = pm8001_ha->general_stat_tbl_addr; |
| 481 | pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate = |
| 482 | pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET); |
| 483 | pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0 = |
| 484 | pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET); |
| 485 | pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1 = |
| 486 | pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET); |
| 487 | pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt = |
| 488 | pm8001_mr32(address, GST_MSGUTCNT_OFFSET); |
| 489 | pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt = |
| 490 | pm8001_mr32(address, GST_IOPTCNT_OFFSET); |
| 491 | pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val = |
| 492 | pm8001_mr32(address, GST_GPIO_INPUT_VAL); |
| 493 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] = |
| 494 | pm8001_mr32(address, GST_RERRINFO_OFFSET0); |
| 495 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] = |
| 496 | pm8001_mr32(address, GST_RERRINFO_OFFSET1); |
| 497 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] = |
| 498 | pm8001_mr32(address, GST_RERRINFO_OFFSET2); |
| 499 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] = |
| 500 | pm8001_mr32(address, GST_RERRINFO_OFFSET3); |
| 501 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] = |
| 502 | pm8001_mr32(address, GST_RERRINFO_OFFSET4); |
| 503 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] = |
| 504 | pm8001_mr32(address, GST_RERRINFO_OFFSET5); |
| 505 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] = |
| 506 | pm8001_mr32(address, GST_RERRINFO_OFFSET6); |
| 507 | pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] = |
| 508 | pm8001_mr32(address, GST_RERRINFO_OFFSET7); |
| 509 | } |
| 510 | /** |
| 511 | * read_phy_attr_table - read the phy attribute table and save it. |
| 512 | * @pm8001_ha: our hba card information |
| 513 | */ |
| 514 | static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha) |
| 515 | { |
| 516 | void __iomem *address = pm8001_ha->pspa_q_tbl_addr; |
| 517 | pm8001_ha->phy_attr_table.phystart1_16[0] = |
| 518 | pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET); |
| 519 | pm8001_ha->phy_attr_table.phystart1_16[1] = |
| 520 | pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET); |
| 521 | pm8001_ha->phy_attr_table.phystart1_16[2] = |
| 522 | pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET); |
| 523 | pm8001_ha->phy_attr_table.phystart1_16[3] = |
| 524 | pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET); |
| 525 | pm8001_ha->phy_attr_table.phystart1_16[4] = |
| 526 | pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET); |
| 527 | pm8001_ha->phy_attr_table.phystart1_16[5] = |
| 528 | pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET); |
| 529 | pm8001_ha->phy_attr_table.phystart1_16[6] = |
| 530 | pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET); |
| 531 | pm8001_ha->phy_attr_table.phystart1_16[7] = |
| 532 | pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET); |
| 533 | pm8001_ha->phy_attr_table.phystart1_16[8] = |
| 534 | pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET); |
| 535 | pm8001_ha->phy_attr_table.phystart1_16[9] = |
| 536 | pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET); |
| 537 | pm8001_ha->phy_attr_table.phystart1_16[10] = |
| 538 | pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET); |
| 539 | pm8001_ha->phy_attr_table.phystart1_16[11] = |
| 540 | pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET); |
| 541 | pm8001_ha->phy_attr_table.phystart1_16[12] = |
| 542 | pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET); |
| 543 | pm8001_ha->phy_attr_table.phystart1_16[13] = |
| 544 | pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET); |
| 545 | pm8001_ha->phy_attr_table.phystart1_16[14] = |
| 546 | pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET); |
| 547 | pm8001_ha->phy_attr_table.phystart1_16[15] = |
| 548 | pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET); |
| 549 | |
| 550 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] = |
| 551 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET); |
| 552 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] = |
| 553 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET); |
| 554 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] = |
| 555 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET); |
| 556 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] = |
| 557 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET); |
| 558 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] = |
| 559 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET); |
| 560 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] = |
| 561 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET); |
| 562 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] = |
| 563 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET); |
| 564 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] = |
| 565 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET); |
| 566 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] = |
| 567 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET); |
| 568 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] = |
| 569 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET); |
| 570 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] = |
| 571 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET); |
| 572 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] = |
| 573 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET); |
| 574 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] = |
| 575 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET); |
| 576 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] = |
| 577 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET); |
| 578 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] = |
| 579 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET); |
| 580 | pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] = |
| 581 | pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET); |
| 582 | |
| 583 | } |
| 584 | |
| 585 | /** |
| 586 | * read_inbnd_queue_table - read the inbound queue table and save it. |
| 587 | * @pm8001_ha: our hba card information |
| 588 | */ |
| 589 | static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha) |
| 590 | { |
| 591 | int i; |
| 592 | void __iomem *address = pm8001_ha->inbnd_q_tbl_addr; |
| 593 | for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { |
| 594 | u32 offset = i * 0x20; |
| 595 | pm8001_ha->inbnd_q_tbl[i].pi_pci_bar = |
| 596 | get_pci_bar_index(pm8001_mr32(address, |
| 597 | (offset + IB_PIPCI_BAR))); |
| 598 | pm8001_ha->inbnd_q_tbl[i].pi_offset = |
| 599 | pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET)); |
| 600 | } |
| 601 | } |
| 602 | |
| 603 | /** |
| 604 | * read_outbnd_queue_table - read the outbound queue table and save it. |
| 605 | * @pm8001_ha: our hba card information |
| 606 | */ |
| 607 | static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha) |
| 608 | { |
| 609 | int i; |
| 610 | void __iomem *address = pm8001_ha->outbnd_q_tbl_addr; |
| 611 | for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { |
| 612 | u32 offset = i * 0x24; |
| 613 | pm8001_ha->outbnd_q_tbl[i].ci_pci_bar = |
| 614 | get_pci_bar_index(pm8001_mr32(address, |
| 615 | (offset + OB_CIPCI_BAR))); |
| 616 | pm8001_ha->outbnd_q_tbl[i].ci_offset = |
| 617 | pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET)); |
| 618 | } |
| 619 | } |
| 620 | |
| 621 | /** |
| 622 | * init_default_table_values - init the default table. |
| 623 | * @pm8001_ha: our hba card information |
| 624 | */ |
| 625 | static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) |
| 626 | { |
| 627 | int i; |
| 628 | u32 offsetib, offsetob; |
| 629 | void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr; |
| 630 | void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr; |
| 631 | |
| 632 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr = |
| 633 | pm8001_ha->memoryMap.region[AAP1].phys_addr_hi; |
| 634 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr = |
| 635 | pm8001_ha->memoryMap.region[AAP1].phys_addr_lo; |
| 636 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size = |
| 637 | PM8001_EVENT_LOG_SIZE; |
| 638 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity = 0x01; |
| 639 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr = |
| 640 | pm8001_ha->memoryMap.region[IOP].phys_addr_hi; |
| 641 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr = |
| 642 | pm8001_ha->memoryMap.region[IOP].phys_addr_lo; |
| 643 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size = |
| 644 | PM8001_EVENT_LOG_SIZE; |
| 645 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01; |
| 646 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01; |
| 647 | |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 648 | /* Disable end to end CRC checking */ |
| 649 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16); |
| 650 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 651 | for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { |
| 652 | pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = |
Hans Verkuil | 9504a92 | 2013-07-26 18:43:45 +0200 | [diff] [blame] | 653 | PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 654 | pm8001_ha->inbnd_q_tbl[i].upper_base_addr = |
| 655 | pm8001_ha->memoryMap.region[IB + i].phys_addr_hi; |
| 656 | pm8001_ha->inbnd_q_tbl[i].lower_base_addr = |
| 657 | pm8001_ha->memoryMap.region[IB + i].phys_addr_lo; |
| 658 | pm8001_ha->inbnd_q_tbl[i].base_virt = |
| 659 | (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr; |
| 660 | pm8001_ha->inbnd_q_tbl[i].total_length = |
| 661 | pm8001_ha->memoryMap.region[IB + i].total_len; |
| 662 | pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr = |
| 663 | pm8001_ha->memoryMap.region[CI + i].phys_addr_hi; |
| 664 | pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr = |
| 665 | pm8001_ha->memoryMap.region[CI + i].phys_addr_lo; |
| 666 | pm8001_ha->inbnd_q_tbl[i].ci_virt = |
| 667 | pm8001_ha->memoryMap.region[CI + i].virt_ptr; |
| 668 | offsetib = i * 0x20; |
| 669 | pm8001_ha->inbnd_q_tbl[i].pi_pci_bar = |
| 670 | get_pci_bar_index(pm8001_mr32(addressib, |
| 671 | (offsetib + 0x14))); |
| 672 | pm8001_ha->inbnd_q_tbl[i].pi_offset = |
| 673 | pm8001_mr32(addressib, (offsetib + 0x18)); |
| 674 | pm8001_ha->inbnd_q_tbl[i].producer_idx = 0; |
| 675 | pm8001_ha->inbnd_q_tbl[i].consumer_index = 0; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 676 | |
| 677 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 678 | "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i, |
| 679 | pm8001_ha->inbnd_q_tbl[i].pi_pci_bar, |
| 680 | pm8001_ha->inbnd_q_tbl[i].pi_offset)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 681 | } |
| 682 | for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { |
| 683 | pm8001_ha->outbnd_q_tbl[i].element_size_cnt = |
Hans Verkuil | 9504a92 | 2013-07-26 18:43:45 +0200 | [diff] [blame] | 684 | PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 685 | pm8001_ha->outbnd_q_tbl[i].upper_base_addr = |
| 686 | pm8001_ha->memoryMap.region[OB + i].phys_addr_hi; |
| 687 | pm8001_ha->outbnd_q_tbl[i].lower_base_addr = |
| 688 | pm8001_ha->memoryMap.region[OB + i].phys_addr_lo; |
| 689 | pm8001_ha->outbnd_q_tbl[i].base_virt = |
| 690 | (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr; |
| 691 | pm8001_ha->outbnd_q_tbl[i].total_length = |
| 692 | pm8001_ha->memoryMap.region[OB + i].total_len; |
| 693 | pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr = |
| 694 | pm8001_ha->memoryMap.region[PI + i].phys_addr_hi; |
| 695 | pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr = |
| 696 | pm8001_ha->memoryMap.region[PI + i].phys_addr_lo; |
| 697 | /* interrupt vector based on oq */ |
| 698 | pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24); |
| 699 | pm8001_ha->outbnd_q_tbl[i].pi_virt = |
| 700 | pm8001_ha->memoryMap.region[PI + i].virt_ptr; |
| 701 | offsetob = i * 0x24; |
| 702 | pm8001_ha->outbnd_q_tbl[i].ci_pci_bar = |
| 703 | get_pci_bar_index(pm8001_mr32(addressob, |
| 704 | offsetob + 0x14)); |
| 705 | pm8001_ha->outbnd_q_tbl[i].ci_offset = |
| 706 | pm8001_mr32(addressob, (offsetob + 0x18)); |
| 707 | pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0; |
| 708 | pm8001_ha->outbnd_q_tbl[i].producer_index = 0; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 709 | |
| 710 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 711 | "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i, |
| 712 | pm8001_ha->outbnd_q_tbl[i].ci_pci_bar, |
| 713 | pm8001_ha->outbnd_q_tbl[i].ci_offset)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 714 | } |
| 715 | } |
| 716 | |
| 717 | /** |
| 718 | * update_main_config_table - update the main default table to the HBA. |
| 719 | * @pm8001_ha: our hba card information |
| 720 | */ |
| 721 | static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) |
| 722 | { |
| 723 | void __iomem *address = pm8001_ha->main_cfg_tbl_addr; |
| 724 | pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET, |
| 725 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd); |
| 726 | pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI, |
| 727 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr); |
| 728 | pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO, |
| 729 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr); |
| 730 | pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE, |
| 731 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size); |
| 732 | pm8001_mw32(address, MAIN_EVENT_LOG_OPTION, |
| 733 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity); |
| 734 | pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI, |
| 735 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr); |
| 736 | pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO, |
| 737 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr); |
| 738 | pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE, |
| 739 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size); |
| 740 | pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION, |
| 741 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity); |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 742 | /* Update Fatal error interrupt vector */ |
| 743 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |= |
| 744 | ((pm8001_ha->number_of_intr - 1) << 8); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 745 | pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT, |
| 746 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 747 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 748 | "Updated Fatal error interrupt vector 0x%x\n", |
| 749 | pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT))); |
| 750 | |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 751 | pm8001_mw32(address, MAIN_EVENT_CRC_CHECK, |
| 752 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 753 | |
| 754 | /* SPCv specific */ |
| 755 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF; |
| 756 | /* Set GPIOLED to 0x2 for LED indicator */ |
| 757 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000; |
| 758 | pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET, |
| 759 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 760 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 761 | "Programming DW 0x21 in main cfg table with 0x%x\n", |
| 762 | pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET))); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 763 | |
| 764 | pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER, |
| 765 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer); |
| 766 | pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY, |
| 767 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay); |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 768 | |
| 769 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= 0xffff0000; |
| 770 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |= |
| 771 | PORT_RECOVERY_TIMEOUT; |
Viswas G | 61daffd | 2017-10-18 11:39:12 +0530 | [diff] [blame] | 772 | if (pm8001_ha->chip_id == chip_8006) { |
| 773 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= |
| 774 | 0x0000ffff; |
| 775 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |= |
Deepak Ukey | 196ba66 | 2019-07-09 15:30:48 +0530 | [diff] [blame] | 776 | CHIP_8006_PORT_RECOVERY_TIMEOUT; |
Viswas G | 61daffd | 2017-10-18 11:39:12 +0530 | [diff] [blame] | 777 | } |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 778 | pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER, |
| 779 | pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 780 | } |
| 781 | |
| 782 | /** |
| 783 | * update_inbnd_queue_table - update the inbound queue table to the HBA. |
| 784 | * @pm8001_ha: our hba card information |
| 785 | */ |
| 786 | static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, |
| 787 | int number) |
| 788 | { |
| 789 | void __iomem *address = pm8001_ha->inbnd_q_tbl_addr; |
| 790 | u16 offset = number * 0x20; |
| 791 | pm8001_mw32(address, offset + IB_PROPERITY_OFFSET, |
| 792 | pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt); |
| 793 | pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET, |
| 794 | pm8001_ha->inbnd_q_tbl[number].upper_base_addr); |
| 795 | pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET, |
| 796 | pm8001_ha->inbnd_q_tbl[number].lower_base_addr); |
| 797 | pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET, |
| 798 | pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr); |
| 799 | pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET, |
| 800 | pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 801 | |
| 802 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 803 | "IQ %d: Element pri size 0x%x\n", |
| 804 | number, |
| 805 | pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt)); |
| 806 | |
| 807 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 808 | "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n", |
| 809 | pm8001_ha->inbnd_q_tbl[number].upper_base_addr, |
| 810 | pm8001_ha->inbnd_q_tbl[number].lower_base_addr)); |
| 811 | |
| 812 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 813 | "CI upper base addr 0x%x CI lower base addr 0x%x\n", |
| 814 | pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr, |
| 815 | pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 816 | } |
| 817 | |
| 818 | /** |
| 819 | * update_outbnd_queue_table - update the outbound queue table to the HBA. |
| 820 | * @pm8001_ha: our hba card information |
| 821 | */ |
| 822 | static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, |
| 823 | int number) |
| 824 | { |
| 825 | void __iomem *address = pm8001_ha->outbnd_q_tbl_addr; |
| 826 | u16 offset = number * 0x24; |
| 827 | pm8001_mw32(address, offset + OB_PROPERITY_OFFSET, |
| 828 | pm8001_ha->outbnd_q_tbl[number].element_size_cnt); |
| 829 | pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET, |
| 830 | pm8001_ha->outbnd_q_tbl[number].upper_base_addr); |
| 831 | pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET, |
| 832 | pm8001_ha->outbnd_q_tbl[number].lower_base_addr); |
| 833 | pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET, |
| 834 | pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr); |
| 835 | pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET, |
| 836 | pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr); |
| 837 | pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET, |
| 838 | pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 839 | |
| 840 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 841 | "OQ %d: Element pri size 0x%x\n", |
| 842 | number, |
| 843 | pm8001_ha->outbnd_q_tbl[number].element_size_cnt)); |
| 844 | |
| 845 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 846 | "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n", |
| 847 | pm8001_ha->outbnd_q_tbl[number].upper_base_addr, |
| 848 | pm8001_ha->outbnd_q_tbl[number].lower_base_addr)); |
| 849 | |
| 850 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 851 | "PI upper base addr 0x%x PI lower base addr 0x%x\n", |
| 852 | pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr, |
| 853 | pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 854 | } |
| 855 | |
| 856 | /** |
| 857 | * mpi_init_check - check firmware initialization status. |
| 858 | * @pm8001_ha: our hba card information |
| 859 | */ |
| 860 | static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) |
| 861 | { |
| 862 | u32 max_wait_count; |
| 863 | u32 value; |
| 864 | u32 gst_len_mpistate; |
| 865 | |
| 866 | /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the |
| 867 | table is updated */ |
| 868 | pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE); |
| 869 | /* wait until Inbound DoorBell Clear Register toggled */ |
Anand Kumar Santhanam | a9a923e | 2013-09-03 15:09:42 +0530 | [diff] [blame] | 870 | if (IS_SPCV_12G(pm8001_ha->pdev)) { |
ianyar | e90e2362 | 2019-11-14 15:39:03 +0530 | [diff] [blame] | 871 | max_wait_count = SPCV_DOORBELL_CLEAR_TIMEOUT; |
Anand Kumar Santhanam | a9a923e | 2013-09-03 15:09:42 +0530 | [diff] [blame] | 872 | } else { |
ianyar | e90e2362 | 2019-11-14 15:39:03 +0530 | [diff] [blame] | 873 | max_wait_count = SPC_DOORBELL_CLEAR_TIMEOUT; |
Anand Kumar Santhanam | a9a923e | 2013-09-03 15:09:42 +0530 | [diff] [blame] | 874 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 875 | do { |
| 876 | udelay(1); |
| 877 | value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); |
| 878 | value &= SPCv_MSGU_CFG_TABLE_UPDATE; |
| 879 | } while ((value != 0) && (--max_wait_count)); |
| 880 | |
| 881 | if (!max_wait_count) |
| 882 | return -1; |
| 883 | /* check the MPI-State for initialization upto 100ms*/ |
| 884 | max_wait_count = 100 * 1000;/* 100 msec */ |
| 885 | do { |
| 886 | udelay(1); |
| 887 | gst_len_mpistate = |
| 888 | pm8001_mr32(pm8001_ha->general_stat_tbl_addr, |
| 889 | GST_GSTLEN_MPIS_OFFSET); |
| 890 | } while ((GST_MPI_STATE_INIT != |
| 891 | (gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count)); |
| 892 | if (!max_wait_count) |
| 893 | return -1; |
| 894 | |
| 895 | /* check MPI Initialization error */ |
| 896 | gst_len_mpistate = gst_len_mpistate >> 16; |
| 897 | if (0x0000 != gst_len_mpistate) |
| 898 | return -1; |
| 899 | |
| 900 | return 0; |
| 901 | } |
| 902 | |
| 903 | /** |
| 904 | * check_fw_ready - The LLDD check if the FW is ready, if not, return error. |
| 905 | * @pm8001_ha: our hba card information |
| 906 | */ |
| 907 | static int check_fw_ready(struct pm8001_hba_info *pm8001_ha) |
| 908 | { |
| 909 | u32 value; |
| 910 | u32 max_wait_count; |
| 911 | u32 max_wait_time; |
| 912 | int ret = 0; |
| 913 | |
| 914 | /* reset / PCIe ready */ |
| 915 | max_wait_time = max_wait_count = 100 * 1000; /* 100 milli sec */ |
| 916 | do { |
| 917 | udelay(1); |
| 918 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 919 | } while ((value == 0xFFFFFFFF) && (--max_wait_count)); |
| 920 | |
| 921 | /* check ila status */ |
| 922 | max_wait_time = max_wait_count = 1000 * 1000; /* 1000 milli sec */ |
| 923 | do { |
| 924 | udelay(1); |
| 925 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 926 | } while (((value & SCRATCH_PAD_ILA_READY) != |
| 927 | SCRATCH_PAD_ILA_READY) && (--max_wait_count)); |
| 928 | if (!max_wait_count) |
| 929 | ret = -1; |
| 930 | else { |
| 931 | PM8001_MSG_DBG(pm8001_ha, |
| 932 | pm8001_printk(" ila ready status in %d millisec\n", |
| 933 | (max_wait_time - max_wait_count))); |
| 934 | } |
| 935 | |
| 936 | /* check RAAE status */ |
| 937 | max_wait_time = max_wait_count = 1800 * 1000; /* 1800 milli sec */ |
| 938 | do { |
| 939 | udelay(1); |
| 940 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 941 | } while (((value & SCRATCH_PAD_RAAE_READY) != |
| 942 | SCRATCH_PAD_RAAE_READY) && (--max_wait_count)); |
| 943 | if (!max_wait_count) |
| 944 | ret = -1; |
| 945 | else { |
| 946 | PM8001_MSG_DBG(pm8001_ha, |
| 947 | pm8001_printk(" raae ready status in %d millisec\n", |
| 948 | (max_wait_time - max_wait_count))); |
| 949 | } |
| 950 | |
| 951 | /* check iop0 status */ |
| 952 | max_wait_time = max_wait_count = 600 * 1000; /* 600 milli sec */ |
| 953 | do { |
| 954 | udelay(1); |
| 955 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 956 | } while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) && |
| 957 | (--max_wait_count)); |
| 958 | if (!max_wait_count) |
| 959 | ret = -1; |
| 960 | else { |
| 961 | PM8001_MSG_DBG(pm8001_ha, |
| 962 | pm8001_printk(" iop0 ready status in %d millisec\n", |
| 963 | (max_wait_time - max_wait_count))); |
| 964 | } |
| 965 | |
| 966 | /* check iop1 status only for 16 port controllers */ |
| 967 | if ((pm8001_ha->chip_id != chip_8008) && |
| 968 | (pm8001_ha->chip_id != chip_8009)) { |
| 969 | /* 200 milli sec */ |
| 970 | max_wait_time = max_wait_count = 200 * 1000; |
| 971 | do { |
| 972 | udelay(1); |
| 973 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 974 | } while (((value & SCRATCH_PAD_IOP1_READY) != |
| 975 | SCRATCH_PAD_IOP1_READY) && (--max_wait_count)); |
| 976 | if (!max_wait_count) |
| 977 | ret = -1; |
| 978 | else { |
| 979 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 980 | "iop1 ready status in %d millisec\n", |
| 981 | (max_wait_time - max_wait_count))); |
| 982 | } |
| 983 | } |
| 984 | |
| 985 | return ret; |
| 986 | } |
| 987 | |
| 988 | static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) |
| 989 | { |
| 990 | void __iomem *base_addr; |
| 991 | u32 value; |
| 992 | u32 offset; |
| 993 | u32 pcibar; |
| 994 | u32 pcilogic; |
| 995 | |
| 996 | value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0); |
| 997 | offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */ |
| 998 | |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 999 | PM8001_DEV_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1000 | pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n", |
| 1001 | offset, value)); |
| 1002 | pcilogic = (value & 0xFC000000) >> 26; |
| 1003 | pcibar = get_pci_bar_index(pcilogic); |
| 1004 | PM8001_INIT_DBG(pm8001_ha, |
| 1005 | pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar)); |
| 1006 | pm8001_ha->main_cfg_tbl_addr = base_addr = |
| 1007 | pm8001_ha->io_mem[pcibar].memvirtaddr + offset; |
| 1008 | pm8001_ha->general_stat_tbl_addr = |
| 1009 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) & |
| 1010 | 0xFFFFFF); |
| 1011 | pm8001_ha->inbnd_q_tbl_addr = |
| 1012 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) & |
| 1013 | 0xFFFFFF); |
| 1014 | pm8001_ha->outbnd_q_tbl_addr = |
| 1015 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) & |
| 1016 | 0xFFFFFF); |
| 1017 | pm8001_ha->ivt_tbl_addr = |
| 1018 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) & |
| 1019 | 0xFFFFFF); |
| 1020 | pm8001_ha->pspa_q_tbl_addr = |
| 1021 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) & |
| 1022 | 0xFFFFFF); |
Anand Kumar Santhanam | d078b51 | 2013-09-04 12:57:00 +0530 | [diff] [blame] | 1023 | pm8001_ha->fatal_tbl_addr = |
| 1024 | base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) & |
| 1025 | 0xFFFFFF); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1026 | |
| 1027 | PM8001_INIT_DBG(pm8001_ha, |
| 1028 | pm8001_printk("GST OFFSET 0x%x\n", |
| 1029 | pm8001_cr32(pm8001_ha, pcibar, offset + 0x18))); |
| 1030 | PM8001_INIT_DBG(pm8001_ha, |
| 1031 | pm8001_printk("INBND OFFSET 0x%x\n", |
| 1032 | pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C))); |
| 1033 | PM8001_INIT_DBG(pm8001_ha, |
| 1034 | pm8001_printk("OBND OFFSET 0x%x\n", |
| 1035 | pm8001_cr32(pm8001_ha, pcibar, offset + 0x20))); |
| 1036 | PM8001_INIT_DBG(pm8001_ha, |
| 1037 | pm8001_printk("IVT OFFSET 0x%x\n", |
| 1038 | pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C))); |
| 1039 | PM8001_INIT_DBG(pm8001_ha, |
| 1040 | pm8001_printk("PSPA OFFSET 0x%x\n", |
| 1041 | pm8001_cr32(pm8001_ha, pcibar, offset + 0x90))); |
| 1042 | PM8001_INIT_DBG(pm8001_ha, |
| 1043 | pm8001_printk("addr - main cfg %p general status %p\n", |
| 1044 | pm8001_ha->main_cfg_tbl_addr, |
| 1045 | pm8001_ha->general_stat_tbl_addr)); |
| 1046 | PM8001_INIT_DBG(pm8001_ha, |
| 1047 | pm8001_printk("addr - inbnd %p obnd %p\n", |
| 1048 | pm8001_ha->inbnd_q_tbl_addr, |
| 1049 | pm8001_ha->outbnd_q_tbl_addr)); |
| 1050 | PM8001_INIT_DBG(pm8001_ha, |
| 1051 | pm8001_printk("addr - pspa %p ivt %p\n", |
| 1052 | pm8001_ha->pspa_q_tbl_addr, |
| 1053 | pm8001_ha->ivt_tbl_addr)); |
| 1054 | } |
| 1055 | |
| 1056 | /** |
| 1057 | * pm80xx_set_thermal_config - support the thermal configuration |
| 1058 | * @pm8001_ha: our hba card information. |
| 1059 | */ |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 1060 | int |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1061 | pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha) |
| 1062 | { |
| 1063 | struct set_ctrl_cfg_req payload; |
| 1064 | struct inbound_queue_table *circularQ; |
| 1065 | int rc; |
| 1066 | u32 tag; |
| 1067 | u32 opc = OPC_INB_SET_CONTROLLER_CONFIG; |
Viswas G | 842784e | 2015-08-11 15:06:27 +0530 | [diff] [blame] | 1068 | u32 page_code; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1069 | |
| 1070 | memset(&payload, 0, sizeof(struct set_ctrl_cfg_req)); |
| 1071 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 1072 | if (rc) |
| 1073 | return -1; |
| 1074 | |
| 1075 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 1076 | payload.tag = cpu_to_le32(tag); |
Viswas G | 842784e | 2015-08-11 15:06:27 +0530 | [diff] [blame] | 1077 | |
| 1078 | if (IS_SPCV_12G(pm8001_ha->pdev)) |
| 1079 | page_code = THERMAL_PAGE_CODE_7H; |
| 1080 | else |
| 1081 | page_code = THERMAL_PAGE_CODE_8H; |
| 1082 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1083 | payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) | |
Viswas G | 842784e | 2015-08-11 15:06:27 +0530 | [diff] [blame] | 1084 | (THERMAL_ENABLE << 8) | page_code; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1085 | payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8); |
| 1086 | |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 1087 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 1088 | "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n", |
| 1089 | payload.cfg_pg[0], payload.cfg_pg[1])); |
| 1090 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 1091 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 1092 | sizeof(payload), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1093 | if (rc) |
| 1094 | pm8001_tag_free(pm8001_ha, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1095 | return rc; |
| 1096 | |
| 1097 | } |
| 1098 | |
| 1099 | /** |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 1100 | * pm80xx_set_sas_protocol_timer_config - support the SAS Protocol |
| 1101 | * Timer configuration page |
| 1102 | * @pm8001_ha: our hba card information. |
| 1103 | */ |
| 1104 | static int |
| 1105 | pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha) |
| 1106 | { |
| 1107 | struct set_ctrl_cfg_req payload; |
| 1108 | struct inbound_queue_table *circularQ; |
| 1109 | SASProtocolTimerConfig_t SASConfigPage; |
| 1110 | int rc; |
| 1111 | u32 tag; |
| 1112 | u32 opc = OPC_INB_SET_CONTROLLER_CONFIG; |
| 1113 | |
| 1114 | memset(&payload, 0, sizeof(struct set_ctrl_cfg_req)); |
| 1115 | memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t)); |
| 1116 | |
| 1117 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 1118 | |
| 1119 | if (rc) |
| 1120 | return -1; |
| 1121 | |
| 1122 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 1123 | payload.tag = cpu_to_le32(tag); |
| 1124 | |
| 1125 | SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE; |
| 1126 | SASConfigPage.MST_MSI = 3 << 15; |
| 1127 | SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO; |
| 1128 | SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) | |
| 1129 | (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER; |
| 1130 | SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME; |
| 1131 | |
| 1132 | if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF) |
| 1133 | SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF; |
| 1134 | |
| 1135 | |
| 1136 | SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) | |
| 1137 | SAS_OPNRJT_RTRY_INTVL; |
| 1138 | SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16) |
| 1139 | | SAS_COPNRJT_RTRY_TMO; |
| 1140 | SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16) |
| 1141 | | SAS_COPNRJT_RTRY_THR; |
| 1142 | SASConfigPage.MAX_AIP = SAS_MAX_AIP; |
| 1143 | |
| 1144 | PM8001_INIT_DBG(pm8001_ha, |
| 1145 | pm8001_printk("SASConfigPage.pageCode " |
| 1146 | "0x%08x\n", SASConfigPage.pageCode)); |
| 1147 | PM8001_INIT_DBG(pm8001_ha, |
| 1148 | pm8001_printk("SASConfigPage.MST_MSI " |
| 1149 | " 0x%08x\n", SASConfigPage.MST_MSI)); |
| 1150 | PM8001_INIT_DBG(pm8001_ha, |
| 1151 | pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO " |
| 1152 | " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO)); |
| 1153 | PM8001_INIT_DBG(pm8001_ha, |
| 1154 | pm8001_printk("SASConfigPage.STP_FRM_TMO " |
| 1155 | " 0x%08x\n", SASConfigPage.STP_FRM_TMO)); |
| 1156 | PM8001_INIT_DBG(pm8001_ha, |
| 1157 | pm8001_printk("SASConfigPage.STP_IDLE_TMO " |
| 1158 | " 0x%08x\n", SASConfigPage.STP_IDLE_TMO)); |
| 1159 | PM8001_INIT_DBG(pm8001_ha, |
| 1160 | pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL " |
| 1161 | " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL)); |
| 1162 | PM8001_INIT_DBG(pm8001_ha, |
| 1163 | pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO " |
| 1164 | " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO)); |
| 1165 | PM8001_INIT_DBG(pm8001_ha, |
| 1166 | pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR " |
| 1167 | " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR)); |
| 1168 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP " |
| 1169 | " 0x%08x\n", SASConfigPage.MAX_AIP)); |
| 1170 | |
| 1171 | memcpy(&payload.cfg_pg, &SASConfigPage, |
| 1172 | sizeof(SASProtocolTimerConfig_t)); |
| 1173 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 1174 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 1175 | sizeof(payload), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1176 | if (rc) |
| 1177 | pm8001_tag_free(pm8001_ha, tag); |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 1178 | |
| 1179 | return rc; |
| 1180 | } |
| 1181 | |
| 1182 | /** |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1183 | * pm80xx_get_encrypt_info - Check for encryption |
| 1184 | * @pm8001_ha: our hba card information. |
| 1185 | */ |
| 1186 | static int |
| 1187 | pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha) |
| 1188 | { |
| 1189 | u32 scratch3_value; |
Rickard Strandqvist | da22549 | 2014-07-09 17:20:10 +0530 | [diff] [blame] | 1190 | int ret = -1; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1191 | |
| 1192 | /* Read encryption status from SCRATCH PAD 3 */ |
| 1193 | scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3); |
| 1194 | |
| 1195 | if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == |
| 1196 | SCRATCH_PAD3_ENC_READY) { |
| 1197 | if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) |
| 1198 | pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; |
| 1199 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1200 | SCRATCH_PAD3_SMF_ENABLED) |
| 1201 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; |
| 1202 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1203 | SCRATCH_PAD3_SMA_ENABLED) |
| 1204 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; |
| 1205 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1206 | SCRATCH_PAD3_SMB_ENABLED) |
| 1207 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; |
| 1208 | pm8001_ha->encrypt_info.status = 0; |
| 1209 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk( |
| 1210 | "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X." |
| 1211 | "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n", |
| 1212 | scratch3_value, pm8001_ha->encrypt_info.cipher_mode, |
| 1213 | pm8001_ha->encrypt_info.sec_mode, |
| 1214 | pm8001_ha->encrypt_info.status)); |
| 1215 | ret = 0; |
| 1216 | } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) == |
| 1217 | SCRATCH_PAD3_ENC_DISABLED) { |
| 1218 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk( |
| 1219 | "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n", |
| 1220 | scratch3_value)); |
| 1221 | pm8001_ha->encrypt_info.status = 0xFFFFFFFF; |
| 1222 | pm8001_ha->encrypt_info.cipher_mode = 0; |
| 1223 | pm8001_ha->encrypt_info.sec_mode = 0; |
Rickard Strandqvist | da22549 | 2014-07-09 17:20:10 +0530 | [diff] [blame] | 1224 | ret = 0; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1225 | } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == |
| 1226 | SCRATCH_PAD3_ENC_DIS_ERR) { |
| 1227 | pm8001_ha->encrypt_info.status = |
| 1228 | (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16; |
| 1229 | if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) |
| 1230 | pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; |
| 1231 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1232 | SCRATCH_PAD3_SMF_ENABLED) |
| 1233 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; |
| 1234 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1235 | SCRATCH_PAD3_SMA_ENABLED) |
| 1236 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; |
| 1237 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1238 | SCRATCH_PAD3_SMB_ENABLED) |
| 1239 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; |
| 1240 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk( |
| 1241 | "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X." |
| 1242 | "Cipher mode 0x%x sec mode 0x%x status 0x%x\n", |
| 1243 | scratch3_value, pm8001_ha->encrypt_info.cipher_mode, |
| 1244 | pm8001_ha->encrypt_info.sec_mode, |
| 1245 | pm8001_ha->encrypt_info.status)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1246 | } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == |
| 1247 | SCRATCH_PAD3_ENC_ENA_ERR) { |
| 1248 | |
| 1249 | pm8001_ha->encrypt_info.status = |
| 1250 | (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16; |
| 1251 | if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) |
| 1252 | pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; |
| 1253 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1254 | SCRATCH_PAD3_SMF_ENABLED) |
| 1255 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; |
| 1256 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1257 | SCRATCH_PAD3_SMA_ENABLED) |
| 1258 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; |
| 1259 | if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == |
| 1260 | SCRATCH_PAD3_SMB_ENABLED) |
| 1261 | pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; |
| 1262 | |
| 1263 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk( |
| 1264 | "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X." |
| 1265 | "Cipher mode 0x%x sec mode 0x%x status 0x%x\n", |
| 1266 | scratch3_value, pm8001_ha->encrypt_info.cipher_mode, |
| 1267 | pm8001_ha->encrypt_info.sec_mode, |
| 1268 | pm8001_ha->encrypt_info.status)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1269 | } |
| 1270 | return ret; |
| 1271 | } |
| 1272 | |
| 1273 | /** |
| 1274 | * pm80xx_encrypt_update - update flash with encryption informtion |
| 1275 | * @pm8001_ha: our hba card information. |
| 1276 | */ |
| 1277 | static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) |
| 1278 | { |
| 1279 | struct kek_mgmt_req payload; |
| 1280 | struct inbound_queue_table *circularQ; |
| 1281 | int rc; |
| 1282 | u32 tag; |
| 1283 | u32 opc = OPC_INB_KEK_MANAGEMENT; |
| 1284 | |
| 1285 | memset(&payload, 0, sizeof(struct kek_mgmt_req)); |
| 1286 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 1287 | if (rc) |
| 1288 | return -1; |
| 1289 | |
| 1290 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 1291 | payload.tag = cpu_to_le32(tag); |
| 1292 | /* Currently only one key is used. New KEK index is 1. |
| 1293 | * Current KEK index is 1. Store KEK to NVRAM is 1. |
| 1294 | */ |
| 1295 | payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) | |
| 1296 | KEK_MGMT_SUBOP_KEYCARDUPDATE); |
| 1297 | |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 1298 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 1299 | "Saving Encryption info to flash. payload 0x%x\n", |
| 1300 | payload.new_curidx_ksop)); |
| 1301 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 1302 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 1303 | sizeof(payload), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1304 | if (rc) |
| 1305 | pm8001_tag_free(pm8001_ha, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1306 | |
| 1307 | return rc; |
| 1308 | } |
| 1309 | |
| 1310 | /** |
| 1311 | * pm8001_chip_init - the main init function that initialize whole PM8001 chip. |
| 1312 | * @pm8001_ha: our hba card information |
| 1313 | */ |
| 1314 | static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) |
| 1315 | { |
| 1316 | int ret; |
| 1317 | u8 i = 0; |
| 1318 | |
| 1319 | /* check the firmware status */ |
| 1320 | if (-1 == check_fw_ready(pm8001_ha)) { |
| 1321 | PM8001_FAIL_DBG(pm8001_ha, |
| 1322 | pm8001_printk("Firmware is not ready!\n")); |
| 1323 | return -EBUSY; |
| 1324 | } |
| 1325 | |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 1326 | /* Initialize the controller fatal error flag */ |
| 1327 | pm8001_ha->controller_fatal_error = false; |
| 1328 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1329 | /* Initialize pci space address eg: mpi offset */ |
| 1330 | init_pci_device_addresses(pm8001_ha); |
| 1331 | init_default_table_values(pm8001_ha); |
| 1332 | read_main_config_table(pm8001_ha); |
| 1333 | read_general_status_table(pm8001_ha); |
| 1334 | read_inbnd_queue_table(pm8001_ha); |
| 1335 | read_outbnd_queue_table(pm8001_ha); |
| 1336 | read_phy_attr_table(pm8001_ha); |
| 1337 | |
| 1338 | /* update main config table ,inbound table and outbound table */ |
| 1339 | update_main_config_table(pm8001_ha); |
| 1340 | for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) |
| 1341 | update_inbnd_queue_table(pm8001_ha, i); |
| 1342 | for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) |
| 1343 | update_outbnd_queue_table(pm8001_ha, i); |
| 1344 | |
| 1345 | /* notify firmware update finished and check initialization status */ |
| 1346 | if (0 == mpi_init_check(pm8001_ha)) { |
| 1347 | PM8001_INIT_DBG(pm8001_ha, |
| 1348 | pm8001_printk("MPI initialize successful!\n")); |
| 1349 | } else |
| 1350 | return -EBUSY; |
| 1351 | |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 1352 | /* send SAS protocol timer configuration page to FW */ |
| 1353 | ret = pm80xx_set_sas_protocol_timer_config(pm8001_ha); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1354 | |
| 1355 | /* Check for encryption */ |
| 1356 | if (pm8001_ha->chip->encrypt) { |
| 1357 | PM8001_INIT_DBG(pm8001_ha, |
| 1358 | pm8001_printk("Checking for encryption\n")); |
| 1359 | ret = pm80xx_get_encrypt_info(pm8001_ha); |
| 1360 | if (ret == -1) { |
| 1361 | PM8001_INIT_DBG(pm8001_ha, |
| 1362 | pm8001_printk("Encryption error !!\n")); |
| 1363 | if (pm8001_ha->encrypt_info.status == 0x81) { |
| 1364 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk( |
| 1365 | "Encryption enabled with error." |
| 1366 | "Saving encryption key to flash\n")); |
| 1367 | pm80xx_encrypt_update(pm8001_ha); |
| 1368 | } |
| 1369 | } |
| 1370 | } |
| 1371 | return 0; |
| 1372 | } |
| 1373 | |
| 1374 | static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) |
| 1375 | { |
| 1376 | u32 max_wait_count; |
| 1377 | u32 value; |
| 1378 | u32 gst_len_mpistate; |
| 1379 | init_pci_device_addresses(pm8001_ha); |
| 1380 | /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the |
| 1381 | table is stop */ |
| 1382 | pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET); |
| 1383 | |
| 1384 | /* wait until Inbound DoorBell Clear Register toggled */ |
Anand Kumar Santhanam | a9a923e | 2013-09-03 15:09:42 +0530 | [diff] [blame] | 1385 | if (IS_SPCV_12G(pm8001_ha->pdev)) { |
| 1386 | max_wait_count = 4 * 1000 * 1000;/* 4 sec */ |
| 1387 | } else { |
| 1388 | max_wait_count = 2 * 1000 * 1000;/* 2 sec */ |
| 1389 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1390 | do { |
| 1391 | udelay(1); |
| 1392 | value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); |
| 1393 | value &= SPCv_MSGU_CFG_TABLE_RESET; |
| 1394 | } while ((value != 0) && (--max_wait_count)); |
| 1395 | |
| 1396 | if (!max_wait_count) { |
| 1397 | PM8001_FAIL_DBG(pm8001_ha, |
| 1398 | pm8001_printk("TIMEOUT:IBDB value/=%x\n", value)); |
| 1399 | return -1; |
| 1400 | } |
| 1401 | |
| 1402 | /* check the MPI-State for termination in progress */ |
| 1403 | /* wait until Inbound DoorBell Clear Register toggled */ |
| 1404 | max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */ |
| 1405 | do { |
| 1406 | udelay(1); |
| 1407 | gst_len_mpistate = |
| 1408 | pm8001_mr32(pm8001_ha->general_stat_tbl_addr, |
| 1409 | GST_GSTLEN_MPIS_OFFSET); |
| 1410 | if (GST_MPI_STATE_UNINIT == |
| 1411 | (gst_len_mpistate & GST_MPI_STATE_MASK)) |
| 1412 | break; |
| 1413 | } while (--max_wait_count); |
| 1414 | if (!max_wait_count) { |
| 1415 | PM8001_FAIL_DBG(pm8001_ha, |
| 1416 | pm8001_printk(" TIME OUT MPI State = 0x%x\n", |
| 1417 | gst_len_mpistate & GST_MPI_STATE_MASK)); |
| 1418 | return -1; |
| 1419 | } |
| 1420 | |
| 1421 | return 0; |
| 1422 | } |
| 1423 | |
| 1424 | /** |
| 1425 | * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all |
| 1426 | * the FW register status to the originated status. |
| 1427 | * @pm8001_ha: our hba card information |
| 1428 | */ |
| 1429 | |
| 1430 | static int |
| 1431 | pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) |
| 1432 | { |
| 1433 | u32 regval; |
| 1434 | u32 bootloader_state; |
Anand Kumar Santhanam | 06f12f22 | 2013-09-17 14:32:20 +0530 | [diff] [blame] | 1435 | u32 ibutton0, ibutton1; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1436 | |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 1437 | /* Process MPI table uninitialization only if FW is ready */ |
| 1438 | if (!pm8001_ha->controller_fatal_error) { |
| 1439 | /* Check if MPI is in ready state to reset */ |
| 1440 | if (mpi_uninit_check(pm8001_ha) != 0) { |
| 1441 | regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 1442 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 1443 | "MPI state is not ready scratch1 :0x%x\n", |
| 1444 | regval)); |
| 1445 | return -1; |
| 1446 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1447 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1448 | /* checked for reset register normal state; 0x0 */ |
| 1449 | regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET); |
| 1450 | PM8001_INIT_DBG(pm8001_ha, |
| 1451 | pm8001_printk("reset register before write : 0x%x\n", regval)); |
| 1452 | |
| 1453 | pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE); |
Vikram Auradkar | 4daf1ef | 2019-11-14 15:39:01 +0530 | [diff] [blame] | 1454 | msleep(500); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1455 | |
| 1456 | regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET); |
| 1457 | PM8001_INIT_DBG(pm8001_ha, |
| 1458 | pm8001_printk("reset register after write 0x%x\n", regval)); |
| 1459 | |
| 1460 | if ((regval & SPCv_SOFT_RESET_READ_MASK) == |
| 1461 | SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) { |
| 1462 | PM8001_MSG_DBG(pm8001_ha, |
| 1463 | pm8001_printk(" soft reset successful [regval: 0x%x]\n", |
| 1464 | regval)); |
| 1465 | } else { |
| 1466 | PM8001_MSG_DBG(pm8001_ha, |
| 1467 | pm8001_printk(" soft reset failed [regval: 0x%x]\n", |
| 1468 | regval)); |
| 1469 | |
| 1470 | /* check bootloader is successfully executed or in HDA mode */ |
| 1471 | bootloader_state = |
| 1472 | pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) & |
| 1473 | SCRATCH_PAD1_BOOTSTATE_MASK; |
| 1474 | |
| 1475 | if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) { |
| 1476 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 1477 | "Bootloader state - HDA mode SEEPROM\n")); |
| 1478 | } else if (bootloader_state == |
| 1479 | SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) { |
| 1480 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 1481 | "Bootloader state - HDA mode Bootstrap Pin\n")); |
| 1482 | } else if (bootloader_state == |
| 1483 | SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) { |
| 1484 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 1485 | "Bootloader state - HDA mode soft reset\n")); |
| 1486 | } else if (bootloader_state == |
| 1487 | SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) { |
| 1488 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 1489 | "Bootloader state-HDA mode critical error\n")); |
| 1490 | } |
| 1491 | return -EBUSY; |
| 1492 | } |
| 1493 | |
| 1494 | /* check the firmware status after reset */ |
| 1495 | if (-1 == check_fw_ready(pm8001_ha)) { |
| 1496 | PM8001_FAIL_DBG(pm8001_ha, |
| 1497 | pm8001_printk("Firmware is not ready!\n")); |
Anand Kumar Santhanam | 06f12f22 | 2013-09-17 14:32:20 +0530 | [diff] [blame] | 1498 | /* check iButton feature support for motherboard controller */ |
| 1499 | if (pm8001_ha->pdev->subsystem_vendor != |
| 1500 | PCI_VENDOR_ID_ADAPTEC2 && |
Benjamin Rood | faf321b | 2015-10-30 10:53:29 -0400 | [diff] [blame] | 1501 | pm8001_ha->pdev->subsystem_vendor != |
| 1502 | PCI_VENDOR_ID_ATTO && |
Anand Kumar Santhanam | 06f12f22 | 2013-09-17 14:32:20 +0530 | [diff] [blame] | 1503 | pm8001_ha->pdev->subsystem_vendor != 0) { |
| 1504 | ibutton0 = pm8001_cr32(pm8001_ha, 0, |
| 1505 | MSGU_HOST_SCRATCH_PAD_6); |
| 1506 | ibutton1 = pm8001_cr32(pm8001_ha, 0, |
| 1507 | MSGU_HOST_SCRATCH_PAD_7); |
| 1508 | if (!ibutton0 && !ibutton1) { |
| 1509 | PM8001_FAIL_DBG(pm8001_ha, |
| 1510 | pm8001_printk("iButton Feature is" |
| 1511 | " not Available!!!\n")); |
| 1512 | return -EBUSY; |
| 1513 | } |
| 1514 | if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) { |
| 1515 | PM8001_FAIL_DBG(pm8001_ha, |
| 1516 | pm8001_printk("CRC Check for iButton" |
| 1517 | " Feature Failed!!!\n")); |
| 1518 | return -EBUSY; |
| 1519 | } |
| 1520 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1521 | } |
| 1522 | PM8001_INIT_DBG(pm8001_ha, |
| 1523 | pm8001_printk("SPCv soft reset Complete\n")); |
| 1524 | return 0; |
| 1525 | } |
| 1526 | |
| 1527 | static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) |
| 1528 | { |
Colin Ian King | 9e2a07e | 2019-03-17 18:15:32 +0000 | [diff] [blame] | 1529 | u32 i; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1530 | |
| 1531 | PM8001_INIT_DBG(pm8001_ha, |
| 1532 | pm8001_printk("chip reset start\n")); |
| 1533 | |
| 1534 | /* do SPCv chip reset. */ |
| 1535 | pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11); |
| 1536 | PM8001_INIT_DBG(pm8001_ha, |
| 1537 | pm8001_printk("SPC soft reset Complete\n")); |
| 1538 | |
| 1539 | /* Check this ..whether delay is required or no */ |
| 1540 | /* delay 10 usec */ |
| 1541 | udelay(10); |
| 1542 | |
| 1543 | /* wait for 20 msec until the firmware gets reloaded */ |
| 1544 | i = 20; |
| 1545 | do { |
| 1546 | mdelay(1); |
| 1547 | } while ((--i) != 0); |
| 1548 | |
| 1549 | PM8001_INIT_DBG(pm8001_ha, |
| 1550 | pm8001_printk("chip reset finished\n")); |
| 1551 | } |
| 1552 | |
| 1553 | /** |
| 1554 | * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt |
| 1555 | * @pm8001_ha: our hba card information |
| 1556 | */ |
| 1557 | static void |
| 1558 | pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) |
| 1559 | { |
| 1560 | pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL); |
| 1561 | pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL); |
| 1562 | } |
| 1563 | |
| 1564 | /** |
| 1565 | * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt |
| 1566 | * @pm8001_ha: our hba card information |
| 1567 | */ |
| 1568 | static void |
| 1569 | pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) |
| 1570 | { |
| 1571 | pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL); |
| 1572 | } |
| 1573 | |
| 1574 | /** |
| 1575 | * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt |
| 1576 | * @pm8001_ha: our hba card information |
| 1577 | */ |
| 1578 | static void |
| 1579 | pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) |
| 1580 | { |
| 1581 | #ifdef PM8001_USE_MSIX |
| 1582 | u32 mask; |
| 1583 | mask = (u32)(1 << vec); |
| 1584 | |
| 1585 | pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF)); |
| 1586 | return; |
| 1587 | #endif |
| 1588 | pm80xx_chip_intx_interrupt_enable(pm8001_ha); |
| 1589 | |
| 1590 | } |
| 1591 | |
| 1592 | /** |
| 1593 | * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt |
| 1594 | * @pm8001_ha: our hba card information |
| 1595 | */ |
| 1596 | static void |
| 1597 | pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) |
| 1598 | { |
| 1599 | #ifdef PM8001_USE_MSIX |
| 1600 | u32 mask; |
| 1601 | if (vec == 0xFF) |
| 1602 | mask = 0xFFFFFFFF; |
| 1603 | else |
| 1604 | mask = (u32)(1 << vec); |
| 1605 | pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF)); |
| 1606 | return; |
| 1607 | #endif |
| 1608 | pm80xx_chip_intx_interrupt_disable(pm8001_ha); |
| 1609 | } |
| 1610 | |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1611 | static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha, |
| 1612 | struct pm8001_device *pm8001_ha_dev) |
| 1613 | { |
| 1614 | int res; |
| 1615 | u32 ccb_tag; |
| 1616 | struct pm8001_ccb_info *ccb; |
| 1617 | struct sas_task *task = NULL; |
| 1618 | struct task_abort_req task_abort; |
| 1619 | struct inbound_queue_table *circularQ; |
| 1620 | u32 opc = OPC_INB_SATA_ABORT; |
| 1621 | int ret; |
| 1622 | |
| 1623 | if (!pm8001_ha_dev) { |
| 1624 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n")); |
| 1625 | return; |
| 1626 | } |
| 1627 | |
| 1628 | task = sas_alloc_slow_task(GFP_ATOMIC); |
| 1629 | |
| 1630 | if (!task) { |
| 1631 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot " |
| 1632 | "allocate task\n")); |
| 1633 | return; |
| 1634 | } |
| 1635 | |
| 1636 | task->task_done = pm8001_task_done; |
| 1637 | |
| 1638 | res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1639 | if (res) { |
| 1640 | sas_free_task(task); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1641 | return; |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1642 | } |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1643 | |
| 1644 | ccb = &pm8001_ha->ccb_info[ccb_tag]; |
| 1645 | ccb->device = pm8001_ha_dev; |
| 1646 | ccb->ccb_tag = ccb_tag; |
| 1647 | ccb->task = task; |
| 1648 | |
| 1649 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 1650 | |
| 1651 | memset(&task_abort, 0, sizeof(task_abort)); |
| 1652 | task_abort.abort_all = cpu_to_le32(1); |
| 1653 | task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id); |
| 1654 | task_abort.tag = cpu_to_le32(ccb_tag); |
| 1655 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 1656 | ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, |
| 1657 | sizeof(task_abort), 0); |
| 1658 | PM8001_FAIL_DBG(pm8001_ha, |
| 1659 | pm8001_printk("Executing abort task end\n")); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1660 | if (ret) { |
| 1661 | sas_free_task(task); |
| 1662 | pm8001_tag_free(pm8001_ha, ccb_tag); |
| 1663 | } |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1664 | } |
| 1665 | |
| 1666 | static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha, |
| 1667 | struct pm8001_device *pm8001_ha_dev) |
| 1668 | { |
| 1669 | struct sata_start_req sata_cmd; |
| 1670 | int res; |
| 1671 | u32 ccb_tag; |
| 1672 | struct pm8001_ccb_info *ccb; |
| 1673 | struct sas_task *task = NULL; |
| 1674 | struct host_to_dev_fis fis; |
| 1675 | struct domain_device *dev; |
| 1676 | struct inbound_queue_table *circularQ; |
| 1677 | u32 opc = OPC_INB_SATA_HOST_OPSTART; |
| 1678 | |
| 1679 | task = sas_alloc_slow_task(GFP_ATOMIC); |
| 1680 | |
| 1681 | if (!task) { |
| 1682 | PM8001_FAIL_DBG(pm8001_ha, |
| 1683 | pm8001_printk("cannot allocate task !!!\n")); |
| 1684 | return; |
| 1685 | } |
| 1686 | task->task_done = pm8001_task_done; |
| 1687 | |
| 1688 | res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); |
| 1689 | if (res) { |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1690 | sas_free_task(task); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1691 | PM8001_FAIL_DBG(pm8001_ha, |
| 1692 | pm8001_printk("cannot allocate tag !!!\n")); |
| 1693 | return; |
| 1694 | } |
| 1695 | |
| 1696 | /* allocate domain device by ourselves as libsas |
| 1697 | * is not going to provide any |
| 1698 | */ |
| 1699 | dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC); |
| 1700 | if (!dev) { |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1701 | sas_free_task(task); |
| 1702 | pm8001_tag_free(pm8001_ha, ccb_tag); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1703 | PM8001_FAIL_DBG(pm8001_ha, |
| 1704 | pm8001_printk("Domain device cannot be allocated\n")); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1705 | return; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1706 | } |
| 1707 | |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1708 | task->dev = dev; |
| 1709 | task->dev->lldd_dev = pm8001_ha_dev; |
| 1710 | |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1711 | ccb = &pm8001_ha->ccb_info[ccb_tag]; |
| 1712 | ccb->device = pm8001_ha_dev; |
| 1713 | ccb->ccb_tag = ccb_tag; |
| 1714 | ccb->task = task; |
Viswas G | 0b6df11 | 2017-10-18 11:39:14 +0530 | [diff] [blame] | 1715 | ccb->n_elem = 0; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1716 | pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG; |
| 1717 | pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG; |
| 1718 | |
| 1719 | memset(&sata_cmd, 0, sizeof(sata_cmd)); |
| 1720 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 1721 | |
| 1722 | /* construct read log FIS */ |
| 1723 | memset(&fis, 0, sizeof(struct host_to_dev_fis)); |
| 1724 | fis.fis_type = 0x27; |
| 1725 | fis.flags = 0x80; |
| 1726 | fis.command = ATA_CMD_READ_LOG_EXT; |
| 1727 | fis.lbal = 0x10; |
| 1728 | fis.sector_count = 0x1; |
| 1729 | |
| 1730 | sata_cmd.tag = cpu_to_le32(ccb_tag); |
| 1731 | sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); |
| 1732 | sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9)); |
| 1733 | memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis)); |
| 1734 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 1735 | res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, |
| 1736 | sizeof(sata_cmd), 0); |
| 1737 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Executing read log end\n")); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 1738 | if (res) { |
| 1739 | sas_free_task(task); |
| 1740 | pm8001_tag_free(pm8001_ha, ccb_tag); |
| 1741 | kfree(dev); |
| 1742 | } |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 1743 | } |
| 1744 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1745 | /** |
| 1746 | * mpi_ssp_completion- process the event that FW response to the SSP request. |
| 1747 | * @pm8001_ha: our hba card information |
| 1748 | * @piomb: the message contents of this outbound message. |
| 1749 | * |
| 1750 | * When FW has completed a ssp request for example a IO request, after it has |
| 1751 | * filled the SG data with the data, it will trigger this event represent |
| 1752 | * that he has finished the job,please check the coresponding buffer. |
| 1753 | * So we will tell the caller who maybe waiting the result to tell upper layer |
| 1754 | * that the task has been finished. |
| 1755 | */ |
| 1756 | static void |
| 1757 | mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) |
| 1758 | { |
| 1759 | struct sas_task *t; |
| 1760 | struct pm8001_ccb_info *ccb; |
| 1761 | unsigned long flags; |
| 1762 | u32 status; |
| 1763 | u32 param; |
| 1764 | u32 tag; |
| 1765 | struct ssp_completion_resp *psspPayload; |
| 1766 | struct task_status_struct *ts; |
| 1767 | struct ssp_response_iu *iu; |
| 1768 | struct pm8001_device *pm8001_dev; |
| 1769 | psspPayload = (struct ssp_completion_resp *)(piomb + 4); |
| 1770 | status = le32_to_cpu(psspPayload->status); |
| 1771 | tag = le32_to_cpu(psspPayload->tag); |
| 1772 | ccb = &pm8001_ha->ccb_info[tag]; |
| 1773 | if ((status == IO_ABORTED) && ccb->open_retry) { |
| 1774 | /* Being completed by another */ |
| 1775 | ccb->open_retry = 0; |
| 1776 | return; |
| 1777 | } |
| 1778 | pm8001_dev = ccb->device; |
| 1779 | param = le32_to_cpu(psspPayload->param); |
| 1780 | t = ccb->task; |
| 1781 | |
| 1782 | if (status && status != IO_UNDERFLOW) |
| 1783 | PM8001_FAIL_DBG(pm8001_ha, |
| 1784 | pm8001_printk("sas IO status 0x%x\n", status)); |
| 1785 | if (unlikely(!t || !t->lldd_task || !t->dev)) |
| 1786 | return; |
| 1787 | ts = &t->task_status; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 1788 | |
| 1789 | PM8001_DEV_DBG(pm8001_ha, pm8001_printk( |
| 1790 | "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t)); |
| 1791 | |
Anand Kumar Santhanam | cb269c2 | 2013-09-17 16:47:21 +0530 | [diff] [blame] | 1792 | /* Print sas address of IO failed device */ |
| 1793 | if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && |
| 1794 | (status != IO_UNDERFLOW)) |
| 1795 | PM8001_FAIL_DBG(pm8001_ha, |
| 1796 | pm8001_printk("SAS Address of IO Failure Drive" |
| 1797 | ":%016llx", SAS_ADDR(t->dev->sas_addr))); |
| 1798 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1799 | switch (status) { |
| 1800 | case IO_SUCCESS: |
| 1801 | PM8001_IO_DBG(pm8001_ha, |
| 1802 | pm8001_printk("IO_SUCCESS ,param = 0x%x\n", |
| 1803 | param)); |
| 1804 | if (param == 0) { |
| 1805 | ts->resp = SAS_TASK_COMPLETE; |
| 1806 | ts->stat = SAM_STAT_GOOD; |
| 1807 | } else { |
| 1808 | ts->resp = SAS_TASK_COMPLETE; |
| 1809 | ts->stat = SAS_PROTO_RESPONSE; |
| 1810 | ts->residual = param; |
| 1811 | iu = &psspPayload->ssp_resp_iu; |
| 1812 | sas_ssp_task_response(pm8001_ha->dev, t, iu); |
| 1813 | } |
| 1814 | if (pm8001_dev) |
| 1815 | pm8001_dev->running_req--; |
| 1816 | break; |
| 1817 | case IO_ABORTED: |
| 1818 | PM8001_IO_DBG(pm8001_ha, |
| 1819 | pm8001_printk("IO_ABORTED IOMB Tag\n")); |
| 1820 | ts->resp = SAS_TASK_COMPLETE; |
| 1821 | ts->stat = SAS_ABORTED_TASK; |
| 1822 | break; |
| 1823 | case IO_UNDERFLOW: |
| 1824 | /* SSP Completion with error */ |
| 1825 | PM8001_IO_DBG(pm8001_ha, |
| 1826 | pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n", |
| 1827 | param)); |
| 1828 | ts->resp = SAS_TASK_COMPLETE; |
| 1829 | ts->stat = SAS_DATA_UNDERRUN; |
| 1830 | ts->residual = param; |
| 1831 | if (pm8001_dev) |
| 1832 | pm8001_dev->running_req--; |
| 1833 | break; |
| 1834 | case IO_NO_DEVICE: |
| 1835 | PM8001_IO_DBG(pm8001_ha, |
| 1836 | pm8001_printk("IO_NO_DEVICE\n")); |
| 1837 | ts->resp = SAS_TASK_UNDELIVERED; |
| 1838 | ts->stat = SAS_PHY_DOWN; |
| 1839 | break; |
| 1840 | case IO_XFER_ERROR_BREAK: |
| 1841 | PM8001_IO_DBG(pm8001_ha, |
| 1842 | pm8001_printk("IO_XFER_ERROR_BREAK\n")); |
| 1843 | ts->resp = SAS_TASK_COMPLETE; |
| 1844 | ts->stat = SAS_OPEN_REJECT; |
| 1845 | /* Force the midlayer to retry */ |
| 1846 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1847 | break; |
| 1848 | case IO_XFER_ERROR_PHY_NOT_READY: |
| 1849 | PM8001_IO_DBG(pm8001_ha, |
| 1850 | pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); |
| 1851 | ts->resp = SAS_TASK_COMPLETE; |
| 1852 | ts->stat = SAS_OPEN_REJECT; |
| 1853 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1854 | break; |
Viswas G | 27ecfa5 | 2015-08-11 15:06:31 +0530 | [diff] [blame] | 1855 | case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME: |
| 1856 | PM8001_IO_DBG(pm8001_ha, |
| 1857 | pm8001_printk("IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n")); |
| 1858 | ts->resp = SAS_TASK_COMPLETE; |
| 1859 | ts->stat = SAS_OPEN_REJECT; |
| 1860 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1861 | break; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1862 | case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: |
| 1863 | PM8001_IO_DBG(pm8001_ha, |
| 1864 | pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); |
| 1865 | ts->resp = SAS_TASK_COMPLETE; |
| 1866 | ts->stat = SAS_OPEN_REJECT; |
| 1867 | ts->open_rej_reason = SAS_OREJ_EPROTO; |
| 1868 | break; |
| 1869 | case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: |
| 1870 | PM8001_IO_DBG(pm8001_ha, |
| 1871 | pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); |
| 1872 | ts->resp = SAS_TASK_COMPLETE; |
| 1873 | ts->stat = SAS_OPEN_REJECT; |
| 1874 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 1875 | break; |
| 1876 | case IO_OPEN_CNX_ERROR_BREAK: |
| 1877 | PM8001_IO_DBG(pm8001_ha, |
| 1878 | pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); |
| 1879 | ts->resp = SAS_TASK_COMPLETE; |
| 1880 | ts->stat = SAS_OPEN_REJECT; |
| 1881 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1882 | break; |
| 1883 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 1884 | case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED: |
| 1885 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO: |
| 1886 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST: |
| 1887 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE: |
| 1888 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED: |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1889 | PM8001_IO_DBG(pm8001_ha, |
| 1890 | pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); |
| 1891 | ts->resp = SAS_TASK_COMPLETE; |
| 1892 | ts->stat = SAS_OPEN_REJECT; |
| 1893 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 1894 | if (!t->uldd_task) |
| 1895 | pm8001_handle_event(pm8001_ha, |
| 1896 | pm8001_dev, |
| 1897 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 1898 | break; |
| 1899 | case IO_OPEN_CNX_ERROR_BAD_DESTINATION: |
| 1900 | PM8001_IO_DBG(pm8001_ha, |
| 1901 | pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); |
| 1902 | ts->resp = SAS_TASK_COMPLETE; |
| 1903 | ts->stat = SAS_OPEN_REJECT; |
| 1904 | ts->open_rej_reason = SAS_OREJ_BAD_DEST; |
| 1905 | break; |
| 1906 | case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: |
| 1907 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 1908 | "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); |
| 1909 | ts->resp = SAS_TASK_COMPLETE; |
| 1910 | ts->stat = SAS_OPEN_REJECT; |
| 1911 | ts->open_rej_reason = SAS_OREJ_CONN_RATE; |
| 1912 | break; |
| 1913 | case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: |
| 1914 | PM8001_IO_DBG(pm8001_ha, |
| 1915 | pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); |
| 1916 | ts->resp = SAS_TASK_UNDELIVERED; |
| 1917 | ts->stat = SAS_OPEN_REJECT; |
| 1918 | ts->open_rej_reason = SAS_OREJ_WRONG_DEST; |
| 1919 | break; |
| 1920 | case IO_XFER_ERROR_NAK_RECEIVED: |
| 1921 | PM8001_IO_DBG(pm8001_ha, |
| 1922 | pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); |
| 1923 | ts->resp = SAS_TASK_COMPLETE; |
| 1924 | ts->stat = SAS_OPEN_REJECT; |
| 1925 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1926 | break; |
| 1927 | case IO_XFER_ERROR_ACK_NAK_TIMEOUT: |
| 1928 | PM8001_IO_DBG(pm8001_ha, |
| 1929 | pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); |
| 1930 | ts->resp = SAS_TASK_COMPLETE; |
| 1931 | ts->stat = SAS_NAK_R_ERR; |
| 1932 | break; |
| 1933 | case IO_XFER_ERROR_DMA: |
| 1934 | PM8001_IO_DBG(pm8001_ha, |
| 1935 | pm8001_printk("IO_XFER_ERROR_DMA\n")); |
| 1936 | ts->resp = SAS_TASK_COMPLETE; |
| 1937 | ts->stat = SAS_OPEN_REJECT; |
| 1938 | break; |
| 1939 | case IO_XFER_OPEN_RETRY_TIMEOUT: |
| 1940 | PM8001_IO_DBG(pm8001_ha, |
| 1941 | pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); |
| 1942 | ts->resp = SAS_TASK_COMPLETE; |
| 1943 | ts->stat = SAS_OPEN_REJECT; |
| 1944 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1945 | break; |
| 1946 | case IO_XFER_ERROR_OFFSET_MISMATCH: |
| 1947 | PM8001_IO_DBG(pm8001_ha, |
| 1948 | pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); |
| 1949 | ts->resp = SAS_TASK_COMPLETE; |
| 1950 | ts->stat = SAS_OPEN_REJECT; |
| 1951 | break; |
| 1952 | case IO_PORT_IN_RESET: |
| 1953 | PM8001_IO_DBG(pm8001_ha, |
| 1954 | pm8001_printk("IO_PORT_IN_RESET\n")); |
| 1955 | ts->resp = SAS_TASK_COMPLETE; |
| 1956 | ts->stat = SAS_OPEN_REJECT; |
| 1957 | break; |
| 1958 | case IO_DS_NON_OPERATIONAL: |
| 1959 | PM8001_IO_DBG(pm8001_ha, |
| 1960 | pm8001_printk("IO_DS_NON_OPERATIONAL\n")); |
| 1961 | ts->resp = SAS_TASK_COMPLETE; |
| 1962 | ts->stat = SAS_OPEN_REJECT; |
| 1963 | if (!t->uldd_task) |
| 1964 | pm8001_handle_event(pm8001_ha, |
| 1965 | pm8001_dev, |
| 1966 | IO_DS_NON_OPERATIONAL); |
| 1967 | break; |
| 1968 | case IO_DS_IN_RECOVERY: |
| 1969 | PM8001_IO_DBG(pm8001_ha, |
| 1970 | pm8001_printk("IO_DS_IN_RECOVERY\n")); |
| 1971 | ts->resp = SAS_TASK_COMPLETE; |
| 1972 | ts->stat = SAS_OPEN_REJECT; |
| 1973 | break; |
| 1974 | case IO_TM_TAG_NOT_FOUND: |
| 1975 | PM8001_IO_DBG(pm8001_ha, |
| 1976 | pm8001_printk("IO_TM_TAG_NOT_FOUND\n")); |
| 1977 | ts->resp = SAS_TASK_COMPLETE; |
| 1978 | ts->stat = SAS_OPEN_REJECT; |
| 1979 | break; |
| 1980 | case IO_SSP_EXT_IU_ZERO_LEN_ERROR: |
| 1981 | PM8001_IO_DBG(pm8001_ha, |
| 1982 | pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n")); |
| 1983 | ts->resp = SAS_TASK_COMPLETE; |
| 1984 | ts->stat = SAS_OPEN_REJECT; |
| 1985 | break; |
| 1986 | case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: |
| 1987 | PM8001_IO_DBG(pm8001_ha, |
| 1988 | pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); |
| 1989 | ts->resp = SAS_TASK_COMPLETE; |
| 1990 | ts->stat = SAS_OPEN_REJECT; |
| 1991 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 1992 | break; |
| 1993 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 1994 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 1995 | pm8001_printk("Unknown status 0x%x\n", status)); |
| 1996 | /* not allowed case. Therefore, return failed status */ |
| 1997 | ts->resp = SAS_TASK_COMPLETE; |
| 1998 | ts->stat = SAS_OPEN_REJECT; |
| 1999 | break; |
| 2000 | } |
| 2001 | PM8001_IO_DBG(pm8001_ha, |
| 2002 | pm8001_printk("scsi_status = 0x%x\n ", |
| 2003 | psspPayload->ssp_resp_iu.status)); |
| 2004 | spin_lock_irqsave(&t->task_state_lock, flags); |
| 2005 | t->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 2006 | t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 2007 | t->task_state_flags |= SAS_TASK_STATE_DONE; |
| 2008 | if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { |
| 2009 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2010 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 2011 | "task 0x%p done with io_status 0x%x resp 0x%x " |
| 2012 | "stat 0x%x but aborted by upper layer!\n", |
| 2013 | t, status, ts->resp, ts->stat)); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 2014 | if (t->slow_task) |
| 2015 | complete(&t->slow_task->completion); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2016 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 2017 | } else { |
| 2018 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2019 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 2020 | mb();/* in order to force CPU ordering */ |
| 2021 | t->task_done(t); |
| 2022 | } |
| 2023 | } |
| 2024 | |
| 2025 | /*See the comments for mpi_ssp_completion */ |
| 2026 | static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) |
| 2027 | { |
| 2028 | struct sas_task *t; |
| 2029 | unsigned long flags; |
| 2030 | struct task_status_struct *ts; |
| 2031 | struct pm8001_ccb_info *ccb; |
| 2032 | struct pm8001_device *pm8001_dev; |
| 2033 | struct ssp_event_resp *psspPayload = |
| 2034 | (struct ssp_event_resp *)(piomb + 4); |
| 2035 | u32 event = le32_to_cpu(psspPayload->event); |
| 2036 | u32 tag = le32_to_cpu(psspPayload->tag); |
| 2037 | u32 port_id = le32_to_cpu(psspPayload->port_id); |
| 2038 | |
| 2039 | ccb = &pm8001_ha->ccb_info[tag]; |
| 2040 | t = ccb->task; |
| 2041 | pm8001_dev = ccb->device; |
| 2042 | if (event) |
| 2043 | PM8001_FAIL_DBG(pm8001_ha, |
| 2044 | pm8001_printk("sas IO status 0x%x\n", event)); |
| 2045 | if (unlikely(!t || !t->lldd_task || !t->dev)) |
| 2046 | return; |
| 2047 | ts = &t->task_status; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2048 | PM8001_IOERR_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2049 | pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n", |
| 2050 | port_id, tag, event)); |
| 2051 | switch (event) { |
| 2052 | case IO_OVERFLOW: |
| 2053 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");) |
| 2054 | ts->resp = SAS_TASK_COMPLETE; |
| 2055 | ts->stat = SAS_DATA_OVERRUN; |
| 2056 | ts->residual = 0; |
| 2057 | if (pm8001_dev) |
| 2058 | pm8001_dev->running_req--; |
| 2059 | break; |
| 2060 | case IO_XFER_ERROR_BREAK: |
| 2061 | PM8001_IO_DBG(pm8001_ha, |
| 2062 | pm8001_printk("IO_XFER_ERROR_BREAK\n")); |
| 2063 | pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK); |
| 2064 | return; |
| 2065 | case IO_XFER_ERROR_PHY_NOT_READY: |
| 2066 | PM8001_IO_DBG(pm8001_ha, |
| 2067 | pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); |
| 2068 | ts->resp = SAS_TASK_COMPLETE; |
| 2069 | ts->stat = SAS_OPEN_REJECT; |
| 2070 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 2071 | break; |
| 2072 | case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: |
| 2073 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2074 | "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); |
| 2075 | ts->resp = SAS_TASK_COMPLETE; |
| 2076 | ts->stat = SAS_OPEN_REJECT; |
| 2077 | ts->open_rej_reason = SAS_OREJ_EPROTO; |
| 2078 | break; |
| 2079 | case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: |
| 2080 | PM8001_IO_DBG(pm8001_ha, |
| 2081 | pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); |
| 2082 | ts->resp = SAS_TASK_COMPLETE; |
| 2083 | ts->stat = SAS_OPEN_REJECT; |
| 2084 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2085 | break; |
| 2086 | case IO_OPEN_CNX_ERROR_BREAK: |
| 2087 | PM8001_IO_DBG(pm8001_ha, |
| 2088 | pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); |
| 2089 | ts->resp = SAS_TASK_COMPLETE; |
| 2090 | ts->stat = SAS_OPEN_REJECT; |
| 2091 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 2092 | break; |
| 2093 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2094 | case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED: |
| 2095 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO: |
| 2096 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST: |
| 2097 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE: |
| 2098 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED: |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2099 | PM8001_IO_DBG(pm8001_ha, |
| 2100 | pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); |
| 2101 | ts->resp = SAS_TASK_COMPLETE; |
| 2102 | ts->stat = SAS_OPEN_REJECT; |
| 2103 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2104 | if (!t->uldd_task) |
| 2105 | pm8001_handle_event(pm8001_ha, |
| 2106 | pm8001_dev, |
| 2107 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 2108 | break; |
| 2109 | case IO_OPEN_CNX_ERROR_BAD_DESTINATION: |
| 2110 | PM8001_IO_DBG(pm8001_ha, |
| 2111 | pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); |
| 2112 | ts->resp = SAS_TASK_COMPLETE; |
| 2113 | ts->stat = SAS_OPEN_REJECT; |
| 2114 | ts->open_rej_reason = SAS_OREJ_BAD_DEST; |
| 2115 | break; |
| 2116 | case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: |
| 2117 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2118 | "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); |
| 2119 | ts->resp = SAS_TASK_COMPLETE; |
| 2120 | ts->stat = SAS_OPEN_REJECT; |
| 2121 | ts->open_rej_reason = SAS_OREJ_CONN_RATE; |
| 2122 | break; |
| 2123 | case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: |
| 2124 | PM8001_IO_DBG(pm8001_ha, |
| 2125 | pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); |
| 2126 | ts->resp = SAS_TASK_COMPLETE; |
| 2127 | ts->stat = SAS_OPEN_REJECT; |
| 2128 | ts->open_rej_reason = SAS_OREJ_WRONG_DEST; |
| 2129 | break; |
| 2130 | case IO_XFER_ERROR_NAK_RECEIVED: |
| 2131 | PM8001_IO_DBG(pm8001_ha, |
| 2132 | pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); |
| 2133 | ts->resp = SAS_TASK_COMPLETE; |
| 2134 | ts->stat = SAS_OPEN_REJECT; |
| 2135 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 2136 | break; |
| 2137 | case IO_XFER_ERROR_ACK_NAK_TIMEOUT: |
| 2138 | PM8001_IO_DBG(pm8001_ha, |
| 2139 | pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); |
| 2140 | ts->resp = SAS_TASK_COMPLETE; |
| 2141 | ts->stat = SAS_NAK_R_ERR; |
| 2142 | break; |
| 2143 | case IO_XFER_OPEN_RETRY_TIMEOUT: |
| 2144 | PM8001_IO_DBG(pm8001_ha, |
| 2145 | pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); |
| 2146 | pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT); |
| 2147 | return; |
| 2148 | case IO_XFER_ERROR_UNEXPECTED_PHASE: |
| 2149 | PM8001_IO_DBG(pm8001_ha, |
| 2150 | pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); |
| 2151 | ts->resp = SAS_TASK_COMPLETE; |
| 2152 | ts->stat = SAS_DATA_OVERRUN; |
| 2153 | break; |
| 2154 | case IO_XFER_ERROR_XFER_RDY_OVERRUN: |
| 2155 | PM8001_IO_DBG(pm8001_ha, |
| 2156 | pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); |
| 2157 | ts->resp = SAS_TASK_COMPLETE; |
| 2158 | ts->stat = SAS_DATA_OVERRUN; |
| 2159 | break; |
| 2160 | case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: |
| 2161 | PM8001_IO_DBG(pm8001_ha, |
| 2162 | pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); |
| 2163 | ts->resp = SAS_TASK_COMPLETE; |
| 2164 | ts->stat = SAS_DATA_OVERRUN; |
| 2165 | break; |
| 2166 | case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT: |
| 2167 | PM8001_IO_DBG(pm8001_ha, |
| 2168 | pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n")); |
| 2169 | ts->resp = SAS_TASK_COMPLETE; |
| 2170 | ts->stat = SAS_DATA_OVERRUN; |
| 2171 | break; |
| 2172 | case IO_XFER_ERROR_OFFSET_MISMATCH: |
| 2173 | PM8001_IO_DBG(pm8001_ha, |
| 2174 | pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); |
| 2175 | ts->resp = SAS_TASK_COMPLETE; |
| 2176 | ts->stat = SAS_DATA_OVERRUN; |
| 2177 | break; |
| 2178 | case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: |
| 2179 | PM8001_IO_DBG(pm8001_ha, |
| 2180 | pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); |
| 2181 | ts->resp = SAS_TASK_COMPLETE; |
| 2182 | ts->stat = SAS_DATA_OVERRUN; |
| 2183 | break; |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2184 | case IO_XFER_ERROR_INTERNAL_CRC_ERROR: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2185 | PM8001_IOERR_DBG(pm8001_ha, |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2186 | pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n")); |
| 2187 | /* TBC: used default set values */ |
| 2188 | ts->resp = SAS_TASK_COMPLETE; |
| 2189 | ts->stat = SAS_DATA_OVERRUN; |
| 2190 | break; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2191 | case IO_XFER_CMD_FRAME_ISSUED: |
| 2192 | PM8001_IO_DBG(pm8001_ha, |
| 2193 | pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n")); |
| 2194 | return; |
| 2195 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2196 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2197 | pm8001_printk("Unknown status 0x%x\n", event)); |
| 2198 | /* not allowed case. Therefore, return failed status */ |
| 2199 | ts->resp = SAS_TASK_COMPLETE; |
| 2200 | ts->stat = SAS_DATA_OVERRUN; |
| 2201 | break; |
| 2202 | } |
| 2203 | spin_lock_irqsave(&t->task_state_lock, flags); |
| 2204 | t->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 2205 | t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 2206 | t->task_state_flags |= SAS_TASK_STATE_DONE; |
| 2207 | if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { |
| 2208 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2209 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 2210 | "task 0x%p done with event 0x%x resp 0x%x " |
| 2211 | "stat 0x%x but aborted by upper layer!\n", |
| 2212 | t, event, ts->resp, ts->stat)); |
| 2213 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 2214 | } else { |
| 2215 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2216 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 2217 | mb();/* in order to force CPU ordering */ |
| 2218 | t->task_done(t); |
| 2219 | } |
| 2220 | } |
| 2221 | |
| 2222 | /*See the comments for mpi_ssp_completion */ |
| 2223 | static void |
| 2224 | mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 2225 | { |
| 2226 | struct sas_task *t; |
| 2227 | struct pm8001_ccb_info *ccb; |
| 2228 | u32 param; |
| 2229 | u32 status; |
| 2230 | u32 tag; |
Anand Kumar Santhanam | cb269c2 | 2013-09-17 16:47:21 +0530 | [diff] [blame] | 2231 | int i, j; |
| 2232 | u8 sata_addr_low[4]; |
| 2233 | u32 temp_sata_addr_low, temp_sata_addr_hi; |
| 2234 | u8 sata_addr_hi[4]; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2235 | struct sata_completion_resp *psataPayload; |
| 2236 | struct task_status_struct *ts; |
| 2237 | struct ata_task_resp *resp ; |
| 2238 | u32 *sata_resp; |
| 2239 | struct pm8001_device *pm8001_dev; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2240 | unsigned long flags; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2241 | |
| 2242 | psataPayload = (struct sata_completion_resp *)(piomb + 4); |
| 2243 | status = le32_to_cpu(psataPayload->status); |
| 2244 | tag = le32_to_cpu(psataPayload->tag); |
| 2245 | |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2246 | if (!tag) { |
| 2247 | PM8001_FAIL_DBG(pm8001_ha, |
| 2248 | pm8001_printk("tag null\n")); |
| 2249 | return; |
| 2250 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2251 | ccb = &pm8001_ha->ccb_info[tag]; |
| 2252 | param = le32_to_cpu(psataPayload->param); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2253 | if (ccb) { |
| 2254 | t = ccb->task; |
| 2255 | pm8001_dev = ccb->device; |
| 2256 | } else { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2257 | PM8001_FAIL_DBG(pm8001_ha, |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2258 | pm8001_printk("ccb null\n")); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2259 | return; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2260 | } |
| 2261 | |
| 2262 | if (t) { |
| 2263 | if (t->dev && (t->dev->lldd_dev)) |
| 2264 | pm8001_dev = t->dev->lldd_dev; |
| 2265 | } else { |
| 2266 | PM8001_FAIL_DBG(pm8001_ha, |
| 2267 | pm8001_printk("task null\n")); |
| 2268 | return; |
| 2269 | } |
| 2270 | |
| 2271 | if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG)) |
| 2272 | && unlikely(!t || !t->lldd_task || !t->dev)) { |
| 2273 | PM8001_FAIL_DBG(pm8001_ha, |
| 2274 | pm8001_printk("task or dev null\n")); |
| 2275 | return; |
| 2276 | } |
| 2277 | |
| 2278 | ts = &t->task_status; |
| 2279 | if (!ts) { |
| 2280 | PM8001_FAIL_DBG(pm8001_ha, |
| 2281 | pm8001_printk("ts null\n")); |
| 2282 | return; |
| 2283 | } |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2284 | |
| 2285 | if (unlikely(status)) |
| 2286 | PM8001_IOERR_DBG(pm8001_ha, pm8001_printk( |
| 2287 | "status:0x%x, tag:0x%x, task::0x%p\n", |
| 2288 | status, tag, t)); |
| 2289 | |
Anand Kumar Santhanam | cb269c2 | 2013-09-17 16:47:21 +0530 | [diff] [blame] | 2290 | /* Print sas address of IO failed device */ |
| 2291 | if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) && |
| 2292 | (status != IO_UNDERFLOW)) { |
| 2293 | if (!((t->dev->parent) && |
John Garry | 924a354 | 2019-06-10 20:41:41 +0800 | [diff] [blame] | 2294 | (dev_is_expander(t->dev->parent->dev_type)))) { |
Anand Kumar Santhanam | cb269c2 | 2013-09-17 16:47:21 +0530 | [diff] [blame] | 2295 | for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++) |
| 2296 | sata_addr_low[i] = pm8001_ha->sas_addr[j]; |
| 2297 | for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++) |
| 2298 | sata_addr_hi[i] = pm8001_ha->sas_addr[j]; |
| 2299 | memcpy(&temp_sata_addr_low, sata_addr_low, |
| 2300 | sizeof(sata_addr_low)); |
| 2301 | memcpy(&temp_sata_addr_hi, sata_addr_hi, |
| 2302 | sizeof(sata_addr_hi)); |
| 2303 | temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff) |
| 2304 | |((temp_sata_addr_hi << 8) & |
| 2305 | 0xff0000) | |
| 2306 | ((temp_sata_addr_hi >> 8) |
| 2307 | & 0xff00) | |
| 2308 | ((temp_sata_addr_hi << 24) & |
| 2309 | 0xff000000)); |
| 2310 | temp_sata_addr_low = ((((temp_sata_addr_low >> 24) |
| 2311 | & 0xff) | |
| 2312 | ((temp_sata_addr_low << 8) |
| 2313 | & 0xff0000) | |
| 2314 | ((temp_sata_addr_low >> 8) |
| 2315 | & 0xff00) | |
| 2316 | ((temp_sata_addr_low << 24) |
| 2317 | & 0xff000000)) + |
| 2318 | pm8001_dev->attached_phy + |
| 2319 | 0x10); |
| 2320 | PM8001_FAIL_DBG(pm8001_ha, |
| 2321 | pm8001_printk("SAS Address of IO Failure Drive:" |
| 2322 | "%08x%08x", temp_sata_addr_hi, |
| 2323 | temp_sata_addr_low)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2324 | |
Anand Kumar Santhanam | cb269c2 | 2013-09-17 16:47:21 +0530 | [diff] [blame] | 2325 | } else { |
| 2326 | PM8001_FAIL_DBG(pm8001_ha, |
| 2327 | pm8001_printk("SAS Address of IO Failure Drive:" |
| 2328 | "%016llx", SAS_ADDR(t->dev->sas_addr))); |
| 2329 | } |
| 2330 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2331 | switch (status) { |
| 2332 | case IO_SUCCESS: |
| 2333 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); |
| 2334 | if (param == 0) { |
| 2335 | ts->resp = SAS_TASK_COMPLETE; |
| 2336 | ts->stat = SAM_STAT_GOOD; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2337 | /* check if response is for SEND READ LOG */ |
| 2338 | if (pm8001_dev && |
| 2339 | (pm8001_dev->id & NCQ_READ_LOG_FLAG)) { |
| 2340 | /* set new bit for abort_all */ |
| 2341 | pm8001_dev->id |= NCQ_ABORT_ALL_FLAG; |
| 2342 | /* clear bit for read log */ |
| 2343 | pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF; |
| 2344 | pm80xx_send_abort_all(pm8001_ha, pm8001_dev); |
| 2345 | /* Free the tag */ |
| 2346 | pm8001_tag_free(pm8001_ha, tag); |
| 2347 | sas_free_task(t); |
| 2348 | return; |
| 2349 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2350 | } else { |
| 2351 | u8 len; |
| 2352 | ts->resp = SAS_TASK_COMPLETE; |
| 2353 | ts->stat = SAS_PROTO_RESPONSE; |
| 2354 | ts->residual = param; |
| 2355 | PM8001_IO_DBG(pm8001_ha, |
| 2356 | pm8001_printk("SAS_PROTO_RESPONSE len = %d\n", |
| 2357 | param)); |
| 2358 | sata_resp = &psataPayload->sata_resp[0]; |
| 2359 | resp = (struct ata_task_resp *)ts->buf; |
| 2360 | if (t->ata_task.dma_xfer == 0 && |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 2361 | t->data_dir == DMA_FROM_DEVICE) { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2362 | len = sizeof(struct pio_setup_fis); |
| 2363 | PM8001_IO_DBG(pm8001_ha, |
| 2364 | pm8001_printk("PIO read len = %d\n", len)); |
| 2365 | } else if (t->ata_task.use_ncq) { |
| 2366 | len = sizeof(struct set_dev_bits_fis); |
| 2367 | PM8001_IO_DBG(pm8001_ha, |
| 2368 | pm8001_printk("FPDMA len = %d\n", len)); |
| 2369 | } else { |
| 2370 | len = sizeof(struct dev_to_host_fis); |
| 2371 | PM8001_IO_DBG(pm8001_ha, |
| 2372 | pm8001_printk("other len = %d\n", len)); |
| 2373 | } |
| 2374 | if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) { |
| 2375 | resp->frame_len = len; |
| 2376 | memcpy(&resp->ending_fis[0], sata_resp, len); |
| 2377 | ts->buf_valid_size = sizeof(*resp); |
| 2378 | } else |
| 2379 | PM8001_IO_DBG(pm8001_ha, |
| 2380 | pm8001_printk("response to large\n")); |
| 2381 | } |
| 2382 | if (pm8001_dev) |
| 2383 | pm8001_dev->running_req--; |
| 2384 | break; |
| 2385 | case IO_ABORTED: |
| 2386 | PM8001_IO_DBG(pm8001_ha, |
| 2387 | pm8001_printk("IO_ABORTED IOMB Tag\n")); |
| 2388 | ts->resp = SAS_TASK_COMPLETE; |
| 2389 | ts->stat = SAS_ABORTED_TASK; |
| 2390 | if (pm8001_dev) |
| 2391 | pm8001_dev->running_req--; |
| 2392 | break; |
| 2393 | /* following cases are to do cases */ |
| 2394 | case IO_UNDERFLOW: |
| 2395 | /* SATA Completion with error */ |
| 2396 | PM8001_IO_DBG(pm8001_ha, |
| 2397 | pm8001_printk("IO_UNDERFLOW param = %d\n", param)); |
| 2398 | ts->resp = SAS_TASK_COMPLETE; |
| 2399 | ts->stat = SAS_DATA_UNDERRUN; |
| 2400 | ts->residual = param; |
| 2401 | if (pm8001_dev) |
| 2402 | pm8001_dev->running_req--; |
| 2403 | break; |
| 2404 | case IO_NO_DEVICE: |
| 2405 | PM8001_IO_DBG(pm8001_ha, |
| 2406 | pm8001_printk("IO_NO_DEVICE\n")); |
| 2407 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2408 | ts->stat = SAS_PHY_DOWN; |
| 2409 | break; |
| 2410 | case IO_XFER_ERROR_BREAK: |
| 2411 | PM8001_IO_DBG(pm8001_ha, |
| 2412 | pm8001_printk("IO_XFER_ERROR_BREAK\n")); |
| 2413 | ts->resp = SAS_TASK_COMPLETE; |
| 2414 | ts->stat = SAS_INTERRUPTED; |
| 2415 | break; |
| 2416 | case IO_XFER_ERROR_PHY_NOT_READY: |
| 2417 | PM8001_IO_DBG(pm8001_ha, |
| 2418 | pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); |
| 2419 | ts->resp = SAS_TASK_COMPLETE; |
| 2420 | ts->stat = SAS_OPEN_REJECT; |
| 2421 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 2422 | break; |
| 2423 | case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: |
| 2424 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2425 | "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); |
| 2426 | ts->resp = SAS_TASK_COMPLETE; |
| 2427 | ts->stat = SAS_OPEN_REJECT; |
| 2428 | ts->open_rej_reason = SAS_OREJ_EPROTO; |
| 2429 | break; |
| 2430 | case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: |
| 2431 | PM8001_IO_DBG(pm8001_ha, |
| 2432 | pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); |
| 2433 | ts->resp = SAS_TASK_COMPLETE; |
| 2434 | ts->stat = SAS_OPEN_REJECT; |
| 2435 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2436 | break; |
| 2437 | case IO_OPEN_CNX_ERROR_BREAK: |
| 2438 | PM8001_IO_DBG(pm8001_ha, |
| 2439 | pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); |
| 2440 | ts->resp = SAS_TASK_COMPLETE; |
| 2441 | ts->stat = SAS_OPEN_REJECT; |
| 2442 | ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; |
| 2443 | break; |
| 2444 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2445 | case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED: |
| 2446 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO: |
| 2447 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST: |
| 2448 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE: |
| 2449 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED: |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2450 | PM8001_IO_DBG(pm8001_ha, |
| 2451 | pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); |
| 2452 | ts->resp = SAS_TASK_COMPLETE; |
| 2453 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2454 | if (!t->uldd_task) { |
| 2455 | pm8001_handle_event(pm8001_ha, |
| 2456 | pm8001_dev, |
| 2457 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 2458 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2459 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2460 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2461 | return; |
| 2462 | } |
| 2463 | break; |
| 2464 | case IO_OPEN_CNX_ERROR_BAD_DESTINATION: |
| 2465 | PM8001_IO_DBG(pm8001_ha, |
| 2466 | pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); |
| 2467 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2468 | ts->stat = SAS_OPEN_REJECT; |
| 2469 | ts->open_rej_reason = SAS_OREJ_BAD_DEST; |
| 2470 | if (!t->uldd_task) { |
| 2471 | pm8001_handle_event(pm8001_ha, |
| 2472 | pm8001_dev, |
| 2473 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 2474 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2475 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2476 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2477 | return; |
| 2478 | } |
| 2479 | break; |
| 2480 | case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: |
| 2481 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2482 | "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); |
| 2483 | ts->resp = SAS_TASK_COMPLETE; |
| 2484 | ts->stat = SAS_OPEN_REJECT; |
| 2485 | ts->open_rej_reason = SAS_OREJ_CONN_RATE; |
| 2486 | break; |
| 2487 | case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY: |
| 2488 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2489 | "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n")); |
| 2490 | ts->resp = SAS_TASK_COMPLETE; |
| 2491 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2492 | if (!t->uldd_task) { |
| 2493 | pm8001_handle_event(pm8001_ha, |
| 2494 | pm8001_dev, |
| 2495 | IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY); |
| 2496 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2497 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2498 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2499 | return; |
| 2500 | } |
| 2501 | break; |
| 2502 | case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: |
| 2503 | PM8001_IO_DBG(pm8001_ha, |
| 2504 | pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); |
| 2505 | ts->resp = SAS_TASK_COMPLETE; |
| 2506 | ts->stat = SAS_OPEN_REJECT; |
| 2507 | ts->open_rej_reason = SAS_OREJ_WRONG_DEST; |
| 2508 | break; |
| 2509 | case IO_XFER_ERROR_NAK_RECEIVED: |
| 2510 | PM8001_IO_DBG(pm8001_ha, |
| 2511 | pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); |
| 2512 | ts->resp = SAS_TASK_COMPLETE; |
| 2513 | ts->stat = SAS_NAK_R_ERR; |
| 2514 | break; |
| 2515 | case IO_XFER_ERROR_ACK_NAK_TIMEOUT: |
| 2516 | PM8001_IO_DBG(pm8001_ha, |
| 2517 | pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); |
| 2518 | ts->resp = SAS_TASK_COMPLETE; |
| 2519 | ts->stat = SAS_NAK_R_ERR; |
| 2520 | break; |
| 2521 | case IO_XFER_ERROR_DMA: |
| 2522 | PM8001_IO_DBG(pm8001_ha, |
| 2523 | pm8001_printk("IO_XFER_ERROR_DMA\n")); |
| 2524 | ts->resp = SAS_TASK_COMPLETE; |
| 2525 | ts->stat = SAS_ABORTED_TASK; |
| 2526 | break; |
| 2527 | case IO_XFER_ERROR_SATA_LINK_TIMEOUT: |
| 2528 | PM8001_IO_DBG(pm8001_ha, |
| 2529 | pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n")); |
| 2530 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2531 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2532 | break; |
| 2533 | case IO_XFER_ERROR_REJECTED_NCQ_MODE: |
| 2534 | PM8001_IO_DBG(pm8001_ha, |
| 2535 | pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); |
| 2536 | ts->resp = SAS_TASK_COMPLETE; |
| 2537 | ts->stat = SAS_DATA_UNDERRUN; |
| 2538 | break; |
| 2539 | case IO_XFER_OPEN_RETRY_TIMEOUT: |
| 2540 | PM8001_IO_DBG(pm8001_ha, |
| 2541 | pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); |
| 2542 | ts->resp = SAS_TASK_COMPLETE; |
| 2543 | ts->stat = SAS_OPEN_TO; |
| 2544 | break; |
| 2545 | case IO_PORT_IN_RESET: |
| 2546 | PM8001_IO_DBG(pm8001_ha, |
| 2547 | pm8001_printk("IO_PORT_IN_RESET\n")); |
| 2548 | ts->resp = SAS_TASK_COMPLETE; |
| 2549 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2550 | break; |
| 2551 | case IO_DS_NON_OPERATIONAL: |
| 2552 | PM8001_IO_DBG(pm8001_ha, |
| 2553 | pm8001_printk("IO_DS_NON_OPERATIONAL\n")); |
| 2554 | ts->resp = SAS_TASK_COMPLETE; |
| 2555 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2556 | if (!t->uldd_task) { |
| 2557 | pm8001_handle_event(pm8001_ha, pm8001_dev, |
| 2558 | IO_DS_NON_OPERATIONAL); |
| 2559 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2560 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2561 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2562 | return; |
| 2563 | } |
| 2564 | break; |
| 2565 | case IO_DS_IN_RECOVERY: |
| 2566 | PM8001_IO_DBG(pm8001_ha, |
| 2567 | pm8001_printk("IO_DS_IN_RECOVERY\n")); |
| 2568 | ts->resp = SAS_TASK_COMPLETE; |
| 2569 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2570 | break; |
| 2571 | case IO_DS_IN_ERROR: |
| 2572 | PM8001_IO_DBG(pm8001_ha, |
| 2573 | pm8001_printk("IO_DS_IN_ERROR\n")); |
| 2574 | ts->resp = SAS_TASK_COMPLETE; |
| 2575 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2576 | if (!t->uldd_task) { |
| 2577 | pm8001_handle_event(pm8001_ha, pm8001_dev, |
| 2578 | IO_DS_IN_ERROR); |
| 2579 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2580 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2581 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2582 | return; |
| 2583 | } |
| 2584 | break; |
| 2585 | case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: |
| 2586 | PM8001_IO_DBG(pm8001_ha, |
| 2587 | pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); |
| 2588 | ts->resp = SAS_TASK_COMPLETE; |
| 2589 | ts->stat = SAS_OPEN_REJECT; |
| 2590 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
Johannes Thumshirn | 50acde8 | 2015-08-17 15:52:32 +0200 | [diff] [blame] | 2591 | break; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2592 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2593 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2594 | pm8001_printk("Unknown status 0x%x\n", status)); |
| 2595 | /* not allowed case. Therefore, return failed status */ |
| 2596 | ts->resp = SAS_TASK_COMPLETE; |
| 2597 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2598 | break; |
| 2599 | } |
| 2600 | spin_lock_irqsave(&t->task_state_lock, flags); |
| 2601 | t->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 2602 | t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 2603 | t->task_state_flags |= SAS_TASK_STATE_DONE; |
| 2604 | if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { |
| 2605 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2606 | PM8001_FAIL_DBG(pm8001_ha, |
| 2607 | pm8001_printk("task 0x%p done with io_status 0x%x" |
| 2608 | " resp 0x%x stat 0x%x but aborted by upper layer!\n", |
| 2609 | t, status, ts->resp, ts->stat)); |
peter chang | ce21c63 | 2019-11-14 15:38:58 +0530 | [diff] [blame] | 2610 | if (t->slow_task) |
| 2611 | complete(&t->slow_task->completion); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2612 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2613 | } else { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2614 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2615 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2616 | } |
| 2617 | } |
| 2618 | |
| 2619 | /*See the comments for mpi_ssp_completion */ |
| 2620 | static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) |
| 2621 | { |
| 2622 | struct sas_task *t; |
| 2623 | struct task_status_struct *ts; |
| 2624 | struct pm8001_ccb_info *ccb; |
| 2625 | struct pm8001_device *pm8001_dev; |
| 2626 | struct sata_event_resp *psataPayload = |
| 2627 | (struct sata_event_resp *)(piomb + 4); |
| 2628 | u32 event = le32_to_cpu(psataPayload->event); |
| 2629 | u32 tag = le32_to_cpu(psataPayload->tag); |
| 2630 | u32 port_id = le32_to_cpu(psataPayload->port_id); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2631 | u32 dev_id = le32_to_cpu(psataPayload->device_id); |
| 2632 | unsigned long flags; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2633 | |
| 2634 | ccb = &pm8001_ha->ccb_info[tag]; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2635 | |
| 2636 | if (ccb) { |
| 2637 | t = ccb->task; |
| 2638 | pm8001_dev = ccb->device; |
| 2639 | } else { |
| 2640 | PM8001_FAIL_DBG(pm8001_ha, |
| 2641 | pm8001_printk("No CCB !!!. returning\n")); |
| 2642 | return; |
| 2643 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2644 | if (event) |
| 2645 | PM8001_FAIL_DBG(pm8001_ha, |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2646 | pm8001_printk("SATA EVENT 0x%x\n", event)); |
| 2647 | |
| 2648 | /* Check if this is NCQ error */ |
| 2649 | if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) { |
| 2650 | /* find device using device id */ |
| 2651 | pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id); |
| 2652 | /* send read log extension */ |
| 2653 | if (pm8001_dev) |
| 2654 | pm80xx_send_read_log(pm8001_ha, pm8001_dev); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2655 | return; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 2656 | } |
| 2657 | |
| 2658 | if (unlikely(!t || !t->lldd_task || !t->dev)) { |
| 2659 | PM8001_FAIL_DBG(pm8001_ha, |
| 2660 | pm8001_printk("task or dev null\n")); |
| 2661 | return; |
| 2662 | } |
| 2663 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2664 | ts = &t->task_status; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2665 | PM8001_IOERR_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2666 | pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n", |
| 2667 | port_id, tag, event)); |
| 2668 | switch (event) { |
| 2669 | case IO_OVERFLOW: |
| 2670 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); |
| 2671 | ts->resp = SAS_TASK_COMPLETE; |
| 2672 | ts->stat = SAS_DATA_OVERRUN; |
| 2673 | ts->residual = 0; |
| 2674 | if (pm8001_dev) |
| 2675 | pm8001_dev->running_req--; |
| 2676 | break; |
| 2677 | case IO_XFER_ERROR_BREAK: |
| 2678 | PM8001_IO_DBG(pm8001_ha, |
| 2679 | pm8001_printk("IO_XFER_ERROR_BREAK\n")); |
| 2680 | ts->resp = SAS_TASK_COMPLETE; |
| 2681 | ts->stat = SAS_INTERRUPTED; |
| 2682 | break; |
| 2683 | case IO_XFER_ERROR_PHY_NOT_READY: |
| 2684 | PM8001_IO_DBG(pm8001_ha, |
| 2685 | pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); |
| 2686 | ts->resp = SAS_TASK_COMPLETE; |
| 2687 | ts->stat = SAS_OPEN_REJECT; |
| 2688 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 2689 | break; |
| 2690 | case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: |
| 2691 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2692 | "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); |
| 2693 | ts->resp = SAS_TASK_COMPLETE; |
| 2694 | ts->stat = SAS_OPEN_REJECT; |
| 2695 | ts->open_rej_reason = SAS_OREJ_EPROTO; |
| 2696 | break; |
| 2697 | case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: |
| 2698 | PM8001_IO_DBG(pm8001_ha, |
| 2699 | pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); |
| 2700 | ts->resp = SAS_TASK_COMPLETE; |
| 2701 | ts->stat = SAS_OPEN_REJECT; |
| 2702 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2703 | break; |
| 2704 | case IO_OPEN_CNX_ERROR_BREAK: |
| 2705 | PM8001_IO_DBG(pm8001_ha, |
| 2706 | pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); |
| 2707 | ts->resp = SAS_TASK_COMPLETE; |
| 2708 | ts->stat = SAS_OPEN_REJECT; |
| 2709 | ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; |
| 2710 | break; |
| 2711 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2712 | case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED: |
| 2713 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO: |
| 2714 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST: |
| 2715 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE: |
| 2716 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED: |
| 2717 | PM8001_FAIL_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2718 | pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); |
| 2719 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2720 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 2721 | if (!t->uldd_task) { |
| 2722 | pm8001_handle_event(pm8001_ha, |
| 2723 | pm8001_dev, |
| 2724 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 2725 | ts->resp = SAS_TASK_COMPLETE; |
| 2726 | ts->stat = SAS_QUEUE_FULL; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2727 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2728 | return; |
| 2729 | } |
| 2730 | break; |
| 2731 | case IO_OPEN_CNX_ERROR_BAD_DESTINATION: |
| 2732 | PM8001_IO_DBG(pm8001_ha, |
| 2733 | pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); |
| 2734 | ts->resp = SAS_TASK_UNDELIVERED; |
| 2735 | ts->stat = SAS_OPEN_REJECT; |
| 2736 | ts->open_rej_reason = SAS_OREJ_BAD_DEST; |
| 2737 | break; |
| 2738 | case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: |
| 2739 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2740 | "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); |
| 2741 | ts->resp = SAS_TASK_COMPLETE; |
| 2742 | ts->stat = SAS_OPEN_REJECT; |
| 2743 | ts->open_rej_reason = SAS_OREJ_CONN_RATE; |
| 2744 | break; |
| 2745 | case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: |
| 2746 | PM8001_IO_DBG(pm8001_ha, |
| 2747 | pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); |
| 2748 | ts->resp = SAS_TASK_COMPLETE; |
| 2749 | ts->stat = SAS_OPEN_REJECT; |
| 2750 | ts->open_rej_reason = SAS_OREJ_WRONG_DEST; |
| 2751 | break; |
| 2752 | case IO_XFER_ERROR_NAK_RECEIVED: |
| 2753 | PM8001_IO_DBG(pm8001_ha, |
| 2754 | pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); |
| 2755 | ts->resp = SAS_TASK_COMPLETE; |
| 2756 | ts->stat = SAS_NAK_R_ERR; |
| 2757 | break; |
| 2758 | case IO_XFER_ERROR_PEER_ABORTED: |
| 2759 | PM8001_IO_DBG(pm8001_ha, |
| 2760 | pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n")); |
| 2761 | ts->resp = SAS_TASK_COMPLETE; |
| 2762 | ts->stat = SAS_NAK_R_ERR; |
| 2763 | break; |
| 2764 | case IO_XFER_ERROR_REJECTED_NCQ_MODE: |
| 2765 | PM8001_IO_DBG(pm8001_ha, |
| 2766 | pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); |
| 2767 | ts->resp = SAS_TASK_COMPLETE; |
| 2768 | ts->stat = SAS_DATA_UNDERRUN; |
| 2769 | break; |
| 2770 | case IO_XFER_OPEN_RETRY_TIMEOUT: |
| 2771 | PM8001_IO_DBG(pm8001_ha, |
| 2772 | pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); |
| 2773 | ts->resp = SAS_TASK_COMPLETE; |
| 2774 | ts->stat = SAS_OPEN_TO; |
| 2775 | break; |
| 2776 | case IO_XFER_ERROR_UNEXPECTED_PHASE: |
| 2777 | PM8001_IO_DBG(pm8001_ha, |
| 2778 | pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); |
| 2779 | ts->resp = SAS_TASK_COMPLETE; |
| 2780 | ts->stat = SAS_OPEN_TO; |
| 2781 | break; |
| 2782 | case IO_XFER_ERROR_XFER_RDY_OVERRUN: |
| 2783 | PM8001_IO_DBG(pm8001_ha, |
| 2784 | pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); |
| 2785 | ts->resp = SAS_TASK_COMPLETE; |
| 2786 | ts->stat = SAS_OPEN_TO; |
| 2787 | break; |
| 2788 | case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: |
| 2789 | PM8001_IO_DBG(pm8001_ha, |
| 2790 | pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); |
| 2791 | ts->resp = SAS_TASK_COMPLETE; |
| 2792 | ts->stat = SAS_OPEN_TO; |
| 2793 | break; |
| 2794 | case IO_XFER_ERROR_OFFSET_MISMATCH: |
| 2795 | PM8001_IO_DBG(pm8001_ha, |
| 2796 | pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); |
| 2797 | ts->resp = SAS_TASK_COMPLETE; |
| 2798 | ts->stat = SAS_OPEN_TO; |
| 2799 | break; |
| 2800 | case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: |
| 2801 | PM8001_IO_DBG(pm8001_ha, |
| 2802 | pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); |
| 2803 | ts->resp = SAS_TASK_COMPLETE; |
| 2804 | ts->stat = SAS_OPEN_TO; |
| 2805 | break; |
| 2806 | case IO_XFER_CMD_FRAME_ISSUED: |
| 2807 | PM8001_IO_DBG(pm8001_ha, |
| 2808 | pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n")); |
| 2809 | break; |
| 2810 | case IO_XFER_PIO_SETUP_ERROR: |
| 2811 | PM8001_IO_DBG(pm8001_ha, |
| 2812 | pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n")); |
| 2813 | ts->resp = SAS_TASK_COMPLETE; |
| 2814 | ts->stat = SAS_OPEN_TO; |
| 2815 | break; |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2816 | case IO_XFER_ERROR_INTERNAL_CRC_ERROR: |
| 2817 | PM8001_FAIL_DBG(pm8001_ha, |
| 2818 | pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n")); |
| 2819 | /* TBC: used default set values */ |
| 2820 | ts->resp = SAS_TASK_COMPLETE; |
| 2821 | ts->stat = SAS_OPEN_TO; |
| 2822 | break; |
| 2823 | case IO_XFER_DMA_ACTIVATE_TIMEOUT: |
| 2824 | PM8001_FAIL_DBG(pm8001_ha, |
| 2825 | pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n")); |
| 2826 | /* TBC: used default set values */ |
| 2827 | ts->resp = SAS_TASK_COMPLETE; |
| 2828 | ts->stat = SAS_OPEN_TO; |
| 2829 | break; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2830 | default: |
| 2831 | PM8001_IO_DBG(pm8001_ha, |
| 2832 | pm8001_printk("Unknown status 0x%x\n", event)); |
| 2833 | /* not allowed case. Therefore, return failed status */ |
| 2834 | ts->resp = SAS_TASK_COMPLETE; |
| 2835 | ts->stat = SAS_OPEN_TO; |
| 2836 | break; |
| 2837 | } |
| 2838 | spin_lock_irqsave(&t->task_state_lock, flags); |
| 2839 | t->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 2840 | t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 2841 | t->task_state_flags |= SAS_TASK_STATE_DONE; |
| 2842 | if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { |
| 2843 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 2844 | PM8001_FAIL_DBG(pm8001_ha, |
| 2845 | pm8001_printk("task 0x%p done with io_status 0x%x" |
| 2846 | " resp 0x%x stat 0x%x but aborted by upper layer!\n", |
| 2847 | t, event, ts->resp, ts->stat)); |
| 2848 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2849 | } else { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2850 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 2851 | pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2852 | } |
| 2853 | } |
| 2854 | |
| 2855 | /*See the comments for mpi_ssp_completion */ |
| 2856 | static void |
| 2857 | mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 2858 | { |
| 2859 | u32 param, i; |
| 2860 | struct sas_task *t; |
| 2861 | struct pm8001_ccb_info *ccb; |
| 2862 | unsigned long flags; |
| 2863 | u32 status; |
| 2864 | u32 tag; |
| 2865 | struct smp_completion_resp *psmpPayload; |
| 2866 | struct task_status_struct *ts; |
| 2867 | struct pm8001_device *pm8001_dev; |
| 2868 | char *pdma_respaddr = NULL; |
| 2869 | |
| 2870 | psmpPayload = (struct smp_completion_resp *)(piomb + 4); |
| 2871 | status = le32_to_cpu(psmpPayload->status); |
| 2872 | tag = le32_to_cpu(psmpPayload->tag); |
| 2873 | |
| 2874 | ccb = &pm8001_ha->ccb_info[tag]; |
| 2875 | param = le32_to_cpu(psmpPayload->param); |
| 2876 | t = ccb->task; |
| 2877 | ts = &t->task_status; |
| 2878 | pm8001_dev = ccb->device; |
| 2879 | if (status) |
| 2880 | PM8001_FAIL_DBG(pm8001_ha, |
| 2881 | pm8001_printk("smp IO status 0x%x\n", status)); |
| 2882 | if (unlikely(!t || !t->lldd_task || !t->dev)) |
| 2883 | return; |
| 2884 | |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 2885 | PM8001_DEV_DBG(pm8001_ha, |
| 2886 | pm8001_printk("tag::0x%x status::0x%x\n", tag, status)); |
| 2887 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2888 | switch (status) { |
| 2889 | |
| 2890 | case IO_SUCCESS: |
| 2891 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); |
| 2892 | ts->resp = SAS_TASK_COMPLETE; |
| 2893 | ts->stat = SAM_STAT_GOOD; |
| 2894 | if (pm8001_dev) |
| 2895 | pm8001_dev->running_req--; |
| 2896 | if (pm8001_ha->smp_exp_mode == SMP_DIRECT) { |
| 2897 | PM8001_IO_DBG(pm8001_ha, |
| 2898 | pm8001_printk("DIRECT RESPONSE Length:%d\n", |
| 2899 | param)); |
| 2900 | pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64 |
| 2901 | ((u64)sg_dma_address |
| 2902 | (&t->smp_task.smp_resp)))); |
| 2903 | for (i = 0; i < param; i++) { |
| 2904 | *(pdma_respaddr+i) = psmpPayload->_r_a[i]; |
| 2905 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 2906 | "SMP Byte%d DMA data 0x%x psmp 0x%x\n", |
| 2907 | i, *(pdma_respaddr+i), |
| 2908 | psmpPayload->_r_a[i])); |
| 2909 | } |
| 2910 | } |
| 2911 | break; |
| 2912 | case IO_ABORTED: |
| 2913 | PM8001_IO_DBG(pm8001_ha, |
| 2914 | pm8001_printk("IO_ABORTED IOMB\n")); |
| 2915 | ts->resp = SAS_TASK_COMPLETE; |
| 2916 | ts->stat = SAS_ABORTED_TASK; |
| 2917 | if (pm8001_dev) |
| 2918 | pm8001_dev->running_req--; |
| 2919 | break; |
| 2920 | case IO_OVERFLOW: |
| 2921 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); |
| 2922 | ts->resp = SAS_TASK_COMPLETE; |
| 2923 | ts->stat = SAS_DATA_OVERRUN; |
| 2924 | ts->residual = 0; |
| 2925 | if (pm8001_dev) |
| 2926 | pm8001_dev->running_req--; |
| 2927 | break; |
| 2928 | case IO_NO_DEVICE: |
| 2929 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n")); |
| 2930 | ts->resp = SAS_TASK_COMPLETE; |
| 2931 | ts->stat = SAS_PHY_DOWN; |
| 2932 | break; |
| 2933 | case IO_ERROR_HW_TIMEOUT: |
| 2934 | PM8001_IO_DBG(pm8001_ha, |
| 2935 | pm8001_printk("IO_ERROR_HW_TIMEOUT\n")); |
| 2936 | ts->resp = SAS_TASK_COMPLETE; |
| 2937 | ts->stat = SAM_STAT_BUSY; |
| 2938 | break; |
| 2939 | case IO_XFER_ERROR_BREAK: |
| 2940 | PM8001_IO_DBG(pm8001_ha, |
| 2941 | pm8001_printk("IO_XFER_ERROR_BREAK\n")); |
| 2942 | ts->resp = SAS_TASK_COMPLETE; |
| 2943 | ts->stat = SAM_STAT_BUSY; |
| 2944 | break; |
| 2945 | case IO_XFER_ERROR_PHY_NOT_READY: |
| 2946 | PM8001_IO_DBG(pm8001_ha, |
| 2947 | pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); |
| 2948 | ts->resp = SAS_TASK_COMPLETE; |
| 2949 | ts->stat = SAM_STAT_BUSY; |
| 2950 | break; |
| 2951 | case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: |
| 2952 | PM8001_IO_DBG(pm8001_ha, |
| 2953 | pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); |
| 2954 | ts->resp = SAS_TASK_COMPLETE; |
| 2955 | ts->stat = SAS_OPEN_REJECT; |
| 2956 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2957 | break; |
| 2958 | case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: |
| 2959 | PM8001_IO_DBG(pm8001_ha, |
| 2960 | pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); |
| 2961 | ts->resp = SAS_TASK_COMPLETE; |
| 2962 | ts->stat = SAS_OPEN_REJECT; |
| 2963 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2964 | break; |
| 2965 | case IO_OPEN_CNX_ERROR_BREAK: |
| 2966 | PM8001_IO_DBG(pm8001_ha, |
| 2967 | pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); |
| 2968 | ts->resp = SAS_TASK_COMPLETE; |
| 2969 | ts->stat = SAS_OPEN_REJECT; |
| 2970 | ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; |
| 2971 | break; |
| 2972 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 2973 | case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED: |
| 2974 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO: |
| 2975 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST: |
| 2976 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE: |
| 2977 | case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED: |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 2978 | PM8001_IO_DBG(pm8001_ha, |
| 2979 | pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); |
| 2980 | ts->resp = SAS_TASK_COMPLETE; |
| 2981 | ts->stat = SAS_OPEN_REJECT; |
| 2982 | ts->open_rej_reason = SAS_OREJ_UNKNOWN; |
| 2983 | pm8001_handle_event(pm8001_ha, |
| 2984 | pm8001_dev, |
| 2985 | IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); |
| 2986 | break; |
| 2987 | case IO_OPEN_CNX_ERROR_BAD_DESTINATION: |
| 2988 | PM8001_IO_DBG(pm8001_ha, |
| 2989 | pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); |
| 2990 | ts->resp = SAS_TASK_COMPLETE; |
| 2991 | ts->stat = SAS_OPEN_REJECT; |
| 2992 | ts->open_rej_reason = SAS_OREJ_BAD_DEST; |
| 2993 | break; |
| 2994 | case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: |
| 2995 | PM8001_IO_DBG(pm8001_ha, pm8001_printk(\ |
| 2996 | "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); |
| 2997 | ts->resp = SAS_TASK_COMPLETE; |
| 2998 | ts->stat = SAS_OPEN_REJECT; |
| 2999 | ts->open_rej_reason = SAS_OREJ_CONN_RATE; |
| 3000 | break; |
| 3001 | case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: |
| 3002 | PM8001_IO_DBG(pm8001_ha, |
| 3003 | pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); |
| 3004 | ts->resp = SAS_TASK_COMPLETE; |
| 3005 | ts->stat = SAS_OPEN_REJECT; |
| 3006 | ts->open_rej_reason = SAS_OREJ_WRONG_DEST; |
| 3007 | break; |
| 3008 | case IO_XFER_ERROR_RX_FRAME: |
| 3009 | PM8001_IO_DBG(pm8001_ha, |
| 3010 | pm8001_printk("IO_XFER_ERROR_RX_FRAME\n")); |
| 3011 | ts->resp = SAS_TASK_COMPLETE; |
| 3012 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 3013 | break; |
| 3014 | case IO_XFER_OPEN_RETRY_TIMEOUT: |
| 3015 | PM8001_IO_DBG(pm8001_ha, |
| 3016 | pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); |
| 3017 | ts->resp = SAS_TASK_COMPLETE; |
| 3018 | ts->stat = SAS_OPEN_REJECT; |
| 3019 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 3020 | break; |
| 3021 | case IO_ERROR_INTERNAL_SMP_RESOURCE: |
| 3022 | PM8001_IO_DBG(pm8001_ha, |
| 3023 | pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n")); |
| 3024 | ts->resp = SAS_TASK_COMPLETE; |
| 3025 | ts->stat = SAS_QUEUE_FULL; |
| 3026 | break; |
| 3027 | case IO_PORT_IN_RESET: |
| 3028 | PM8001_IO_DBG(pm8001_ha, |
| 3029 | pm8001_printk("IO_PORT_IN_RESET\n")); |
| 3030 | ts->resp = SAS_TASK_COMPLETE; |
| 3031 | ts->stat = SAS_OPEN_REJECT; |
| 3032 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 3033 | break; |
| 3034 | case IO_DS_NON_OPERATIONAL: |
| 3035 | PM8001_IO_DBG(pm8001_ha, |
| 3036 | pm8001_printk("IO_DS_NON_OPERATIONAL\n")); |
| 3037 | ts->resp = SAS_TASK_COMPLETE; |
| 3038 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 3039 | break; |
| 3040 | case IO_DS_IN_RECOVERY: |
| 3041 | PM8001_IO_DBG(pm8001_ha, |
| 3042 | pm8001_printk("IO_DS_IN_RECOVERY\n")); |
| 3043 | ts->resp = SAS_TASK_COMPLETE; |
| 3044 | ts->stat = SAS_OPEN_REJECT; |
| 3045 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 3046 | break; |
| 3047 | case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: |
| 3048 | PM8001_IO_DBG(pm8001_ha, |
| 3049 | pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); |
| 3050 | ts->resp = SAS_TASK_COMPLETE; |
| 3051 | ts->stat = SAS_OPEN_REJECT; |
| 3052 | ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; |
| 3053 | break; |
| 3054 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3055 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3056 | pm8001_printk("Unknown status 0x%x\n", status)); |
| 3057 | ts->resp = SAS_TASK_COMPLETE; |
| 3058 | ts->stat = SAS_DEV_NO_RESPONSE; |
| 3059 | /* not allowed case. Therefore, return failed status */ |
| 3060 | break; |
| 3061 | } |
| 3062 | spin_lock_irqsave(&t->task_state_lock, flags); |
| 3063 | t->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 3064 | t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 3065 | t->task_state_flags |= SAS_TASK_STATE_DONE; |
| 3066 | if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { |
| 3067 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 3068 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 3069 | "task 0x%p done with io_status 0x%x resp 0x%x" |
| 3070 | "stat 0x%x but aborted by upper layer!\n", |
| 3071 | t, status, ts->resp, ts->stat)); |
| 3072 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 3073 | } else { |
| 3074 | spin_unlock_irqrestore(&t->task_state_lock, flags); |
| 3075 | pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); |
| 3076 | mb();/* in order to force CPU ordering */ |
| 3077 | t->task_done(t); |
| 3078 | } |
| 3079 | } |
| 3080 | |
| 3081 | /** |
| 3082 | * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW. |
| 3083 | * @pm8001_ha: our hba card information |
| 3084 | * @Qnum: the outbound queue message number. |
| 3085 | * @SEA: source of event to ack |
| 3086 | * @port_id: port id. |
| 3087 | * @phyId: phy id. |
| 3088 | * @param0: parameter 0. |
| 3089 | * @param1: parameter 1. |
| 3090 | */ |
| 3091 | static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha, |
| 3092 | u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1) |
| 3093 | { |
| 3094 | struct hw_event_ack_req payload; |
| 3095 | u32 opc = OPC_INB_SAS_HW_EVENT_ACK; |
| 3096 | |
| 3097 | struct inbound_queue_table *circularQ; |
| 3098 | |
| 3099 | memset((u8 *)&payload, 0, sizeof(payload)); |
| 3100 | circularQ = &pm8001_ha->inbnd_q_tbl[Qnum]; |
| 3101 | payload.tag = cpu_to_le32(1); |
| 3102 | payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) | |
| 3103 | ((phyId & 0xFF) << 24) | (port_id & 0xFF)); |
| 3104 | payload.param0 = cpu_to_le32(param0); |
| 3105 | payload.param1 = cpu_to_le32(param1); |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 3106 | pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 3107 | sizeof(payload), 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3108 | } |
| 3109 | |
| 3110 | static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, |
| 3111 | u32 phyId, u32 phy_op); |
| 3112 | |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3113 | static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha, |
| 3114 | void *piomb) |
| 3115 | { |
| 3116 | struct hw_event_resp *pPayload = (struct hw_event_resp *)(piomb + 4); |
| 3117 | u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); |
| 3118 | u8 phy_id = (u8)((phyid_npip_portstate & 0xFF0000) >> 16); |
| 3119 | u32 lr_status_evt_portid = |
| 3120 | le32_to_cpu(pPayload->lr_status_evt_portid); |
| 3121 | u8 deviceType = pPayload->sas_identify.dev_type; |
| 3122 | u8 link_rate = (u8)((lr_status_evt_portid & 0xF0000000) >> 28); |
| 3123 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
| 3124 | u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); |
| 3125 | struct pm8001_port *port = &pm8001_ha->port[port_id]; |
| 3126 | |
| 3127 | if (deviceType == SAS_END_DEVICE) { |
| 3128 | pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id, |
| 3129 | PHY_NOTIFY_ENABLE_SPINUP); |
| 3130 | } |
| 3131 | |
| 3132 | port->wide_port_phymap |= (1U << phy_id); |
| 3133 | pm8001_get_lrate_mode(phy, link_rate); |
| 3134 | phy->sas_phy.oob_mode = SAS_OOB_MODE; |
| 3135 | phy->phy_state = PHY_STATE_LINK_UP_SPCV; |
| 3136 | phy->phy_attached = 1; |
| 3137 | } |
| 3138 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3139 | /** |
| 3140 | * hw_event_sas_phy_up -FW tells me a SAS phy up event. |
| 3141 | * @pm8001_ha: our hba card information |
| 3142 | * @piomb: IO message buffer |
| 3143 | */ |
| 3144 | static void |
| 3145 | hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3146 | { |
| 3147 | struct hw_event_resp *pPayload = |
| 3148 | (struct hw_event_resp *)(piomb + 4); |
| 3149 | u32 lr_status_evt_portid = |
| 3150 | le32_to_cpu(pPayload->lr_status_evt_portid); |
| 3151 | u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); |
| 3152 | |
| 3153 | u8 link_rate = |
| 3154 | (u8)((lr_status_evt_portid & 0xF0000000) >> 28); |
| 3155 | u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); |
| 3156 | u8 phy_id = |
| 3157 | (u8)((phyid_npip_portstate & 0xFF0000) >> 16); |
| 3158 | u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); |
| 3159 | |
| 3160 | struct pm8001_port *port = &pm8001_ha->port[port_id]; |
| 3161 | struct sas_ha_struct *sas_ha = pm8001_ha->sas; |
| 3162 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
| 3163 | unsigned long flags; |
| 3164 | u8 deviceType = pPayload->sas_identify.dev_type; |
| 3165 | port->port_state = portstate; |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3166 | port->wide_port_phymap |= (1U << phy_id); |
Nikith Ganigarakoppal | 7d02900 | 2013-10-30 16:23:47 +0530 | [diff] [blame] | 3167 | phy->phy_state = PHY_STATE_LINK_UP_SPCV; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3168 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3169 | "portid:%d; phyid:%d; linkrate:%d; " |
| 3170 | "portstate:%x; devicetype:%x\n", |
| 3171 | port_id, phy_id, link_rate, portstate, deviceType)); |
| 3172 | |
| 3173 | switch (deviceType) { |
| 3174 | case SAS_PHY_UNUSED: |
| 3175 | PM8001_MSG_DBG(pm8001_ha, |
| 3176 | pm8001_printk("device type no device.\n")); |
| 3177 | break; |
| 3178 | case SAS_END_DEVICE: |
| 3179 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); |
| 3180 | pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id, |
| 3181 | PHY_NOTIFY_ENABLE_SPINUP); |
| 3182 | port->port_attached = 1; |
| 3183 | pm8001_get_lrate_mode(phy, link_rate); |
| 3184 | break; |
| 3185 | case SAS_EDGE_EXPANDER_DEVICE: |
| 3186 | PM8001_MSG_DBG(pm8001_ha, |
| 3187 | pm8001_printk("expander device.\n")); |
| 3188 | port->port_attached = 1; |
| 3189 | pm8001_get_lrate_mode(phy, link_rate); |
| 3190 | break; |
| 3191 | case SAS_FANOUT_EXPANDER_DEVICE: |
| 3192 | PM8001_MSG_DBG(pm8001_ha, |
| 3193 | pm8001_printk("fanout expander device.\n")); |
| 3194 | port->port_attached = 1; |
| 3195 | pm8001_get_lrate_mode(phy, link_rate); |
| 3196 | break; |
| 3197 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3198 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3199 | pm8001_printk("unknown device type(%x)\n", deviceType)); |
| 3200 | break; |
| 3201 | } |
| 3202 | phy->phy_type |= PORT_TYPE_SAS; |
| 3203 | phy->identify.device_type = deviceType; |
| 3204 | phy->phy_attached = 1; |
| 3205 | if (phy->identify.device_type == SAS_END_DEVICE) |
| 3206 | phy->identify.target_port_protocols = SAS_PROTOCOL_SSP; |
| 3207 | else if (phy->identify.device_type != SAS_PHY_UNUSED) |
| 3208 | phy->identify.target_port_protocols = SAS_PROTOCOL_SMP; |
| 3209 | phy->sas_phy.oob_mode = SAS_OOB_MODE; |
| 3210 | sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); |
| 3211 | spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); |
| 3212 | memcpy(phy->frame_rcvd, &pPayload->sas_identify, |
| 3213 | sizeof(struct sas_identify_frame)-4); |
| 3214 | phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4; |
| 3215 | pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); |
| 3216 | spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); |
| 3217 | if (pm8001_ha->flags == PM8001F_RUN_TIME) |
Vikram Auradkar | 4daf1ef | 2019-11-14 15:39:01 +0530 | [diff] [blame] | 3218 | msleep(200);/*delay a moment to wait disk to spinup*/ |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3219 | pm8001_bytes_dmaed(pm8001_ha, phy_id); |
| 3220 | } |
| 3221 | |
| 3222 | /** |
| 3223 | * hw_event_sata_phy_up -FW tells me a SATA phy up event. |
| 3224 | * @pm8001_ha: our hba card information |
| 3225 | * @piomb: IO message buffer |
| 3226 | */ |
| 3227 | static void |
| 3228 | hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3229 | { |
| 3230 | struct hw_event_resp *pPayload = |
| 3231 | (struct hw_event_resp *)(piomb + 4); |
| 3232 | u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); |
| 3233 | u32 lr_status_evt_portid = |
| 3234 | le32_to_cpu(pPayload->lr_status_evt_portid); |
| 3235 | u8 link_rate = |
| 3236 | (u8)((lr_status_evt_portid & 0xF0000000) >> 28); |
| 3237 | u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); |
| 3238 | u8 phy_id = |
| 3239 | (u8)((phyid_npip_portstate & 0xFF0000) >> 16); |
| 3240 | |
| 3241 | u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); |
| 3242 | |
| 3243 | struct pm8001_port *port = &pm8001_ha->port[port_id]; |
| 3244 | struct sas_ha_struct *sas_ha = pm8001_ha->sas; |
| 3245 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
| 3246 | unsigned long flags; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3247 | PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3248 | "port id %d, phy id %d link_rate %d portstate 0x%x\n", |
| 3249 | port_id, phy_id, link_rate, portstate)); |
| 3250 | |
| 3251 | port->port_state = portstate; |
Nikith Ganigarakoppal | 7d02900 | 2013-10-30 16:23:47 +0530 | [diff] [blame] | 3252 | phy->phy_state = PHY_STATE_LINK_UP_SPCV; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3253 | port->port_attached = 1; |
| 3254 | pm8001_get_lrate_mode(phy, link_rate); |
| 3255 | phy->phy_type |= PORT_TYPE_SATA; |
| 3256 | phy->phy_attached = 1; |
| 3257 | phy->sas_phy.oob_mode = SATA_OOB_MODE; |
| 3258 | sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); |
| 3259 | spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); |
| 3260 | memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4), |
| 3261 | sizeof(struct dev_to_host_fis)); |
| 3262 | phy->frame_rcvd_size = sizeof(struct dev_to_host_fis); |
| 3263 | phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; |
James Bottomley | aa9f832 | 2013-05-07 14:44:06 -0700 | [diff] [blame] | 3264 | phy->identify.device_type = SAS_SATA_DEV; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3265 | pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); |
| 3266 | spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); |
| 3267 | pm8001_bytes_dmaed(pm8001_ha, phy_id); |
| 3268 | } |
| 3269 | |
| 3270 | /** |
| 3271 | * hw_event_phy_down -we should notify the libsas the phy is down. |
| 3272 | * @pm8001_ha: our hba card information |
| 3273 | * @piomb: IO message buffer |
| 3274 | */ |
| 3275 | static void |
| 3276 | hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3277 | { |
| 3278 | struct hw_event_resp *pPayload = |
| 3279 | (struct hw_event_resp *)(piomb + 4); |
| 3280 | |
| 3281 | u32 lr_status_evt_portid = |
| 3282 | le32_to_cpu(pPayload->lr_status_evt_portid); |
| 3283 | u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); |
| 3284 | u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); |
| 3285 | u8 phy_id = |
| 3286 | (u8)((phyid_npip_portstate & 0xFF0000) >> 16); |
| 3287 | u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); |
| 3288 | |
| 3289 | struct pm8001_port *port = &pm8001_ha->port[port_id]; |
| 3290 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3291 | u32 port_sata = (phy->phy_type & PORT_TYPE_SATA); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3292 | port->port_state = portstate; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3293 | phy->identify.device_type = 0; |
| 3294 | phy->phy_attached = 0; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3295 | switch (portstate) { |
| 3296 | case PORT_VALID: |
| 3297 | break; |
| 3298 | case PORT_INVALID: |
| 3299 | PM8001_MSG_DBG(pm8001_ha, |
| 3300 | pm8001_printk(" PortInvalid portID %d\n", port_id)); |
| 3301 | PM8001_MSG_DBG(pm8001_ha, |
| 3302 | pm8001_printk(" Last phy Down and port invalid\n")); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3303 | if (port_sata) { |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3304 | phy->phy_type = 0; |
| 3305 | port->port_attached = 0; |
| 3306 | pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, |
| 3307 | port_id, phy_id, 0, 0); |
| 3308 | } |
| 3309 | sas_phy_disconnected(&phy->sas_phy); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3310 | break; |
| 3311 | case PORT_IN_RESET: |
| 3312 | PM8001_MSG_DBG(pm8001_ha, |
| 3313 | pm8001_printk(" Port In Reset portID %d\n", port_id)); |
| 3314 | break; |
| 3315 | case PORT_NOT_ESTABLISHED: |
| 3316 | PM8001_MSG_DBG(pm8001_ha, |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3317 | pm8001_printk(" Phy Down and PORT_NOT_ESTABLISHED\n")); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3318 | port->port_attached = 0; |
| 3319 | break; |
| 3320 | case PORT_LOSTCOMM: |
| 3321 | PM8001_MSG_DBG(pm8001_ha, |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3322 | pm8001_printk(" Phy Down and PORT_LOSTCOMM\n")); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3323 | PM8001_MSG_DBG(pm8001_ha, |
| 3324 | pm8001_printk(" Last phy Down and port invalid\n")); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3325 | if (port_sata) { |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3326 | port->port_attached = 0; |
| 3327 | phy->phy_type = 0; |
| 3328 | pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, |
| 3329 | port_id, phy_id, 0, 0); |
| 3330 | } |
| 3331 | sas_phy_disconnected(&phy->sas_phy); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3332 | break; |
| 3333 | default: |
| 3334 | port->port_attached = 0; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3335 | PM8001_DEVIO_DBG(pm8001_ha, |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3336 | pm8001_printk(" Phy Down and(default) = 0x%x\n", |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3337 | portstate)); |
| 3338 | break; |
| 3339 | |
| 3340 | } |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3341 | if (port_sata && (portstate != PORT_IN_RESET)) { |
| 3342 | struct sas_ha_struct *sas_ha = pm8001_ha->sas; |
| 3343 | |
| 3344 | sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); |
| 3345 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3346 | } |
| 3347 | |
| 3348 | static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3349 | { |
| 3350 | struct phy_start_resp *pPayload = |
| 3351 | (struct phy_start_resp *)(piomb + 4); |
| 3352 | u32 status = |
| 3353 | le32_to_cpu(pPayload->status); |
| 3354 | u32 phy_id = |
| 3355 | le32_to_cpu(pPayload->phyid); |
| 3356 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
| 3357 | |
| 3358 | PM8001_INIT_DBG(pm8001_ha, |
| 3359 | pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n", |
| 3360 | status, phy_id)); |
| 3361 | if (status == 0) { |
Deepak Ukey | cd13575 | 2018-09-11 14:18:02 +0530 | [diff] [blame] | 3362 | phy->phy_state = PHY_LINK_DOWN; |
| 3363 | if (pm8001_ha->flags == PM8001F_RUN_TIME && |
peter chang | e703977 | 2019-11-14 15:38:59 +0530 | [diff] [blame] | 3364 | phy->enable_completion != NULL) { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3365 | complete(phy->enable_completion); |
peter chang | e703977 | 2019-11-14 15:38:59 +0530 | [diff] [blame] | 3366 | phy->enable_completion = NULL; |
| 3367 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3368 | } |
| 3369 | return 0; |
| 3370 | |
| 3371 | } |
| 3372 | |
| 3373 | /** |
| 3374 | * mpi_thermal_hw_event -The hw event has come. |
| 3375 | * @pm8001_ha: our hba card information |
| 3376 | * @piomb: IO message buffer |
| 3377 | */ |
| 3378 | static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3379 | { |
| 3380 | struct thermal_hw_event *pPayload = |
| 3381 | (struct thermal_hw_event *)(piomb + 4); |
| 3382 | |
| 3383 | u32 thermal_event = le32_to_cpu(pPayload->thermal_event); |
| 3384 | u32 rht_lht = le32_to_cpu(pPayload->rht_lht); |
| 3385 | |
| 3386 | if (thermal_event & 0x40) { |
| 3387 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 3388 | "Thermal Event: Local high temperature violated!\n")); |
| 3389 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 3390 | "Thermal Event: Measured local high temperature %d\n", |
| 3391 | ((rht_lht & 0xFF00) >> 8))); |
| 3392 | } |
| 3393 | if (thermal_event & 0x10) { |
| 3394 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 3395 | "Thermal Event: Remote high temperature violated!\n")); |
| 3396 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 3397 | "Thermal Event: Measured remote high temperature %d\n", |
| 3398 | ((rht_lht & 0xFF000000) >> 24))); |
| 3399 | } |
| 3400 | return 0; |
| 3401 | } |
| 3402 | |
| 3403 | /** |
| 3404 | * mpi_hw_event -The hw event has come. |
| 3405 | * @pm8001_ha: our hba card information |
| 3406 | * @piomb: IO message buffer |
| 3407 | */ |
| 3408 | static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3409 | { |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3410 | unsigned long flags, i; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3411 | struct hw_event_resp *pPayload = |
| 3412 | (struct hw_event_resp *)(piomb + 4); |
| 3413 | u32 lr_status_evt_portid = |
| 3414 | le32_to_cpu(pPayload->lr_status_evt_portid); |
| 3415 | u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); |
| 3416 | u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); |
| 3417 | u8 phy_id = |
| 3418 | (u8)((phyid_npip_portstate & 0xFF0000) >> 16); |
| 3419 | u16 eventType = |
| 3420 | (u16)((lr_status_evt_portid & 0x00FFFF00) >> 8); |
| 3421 | u8 status = |
| 3422 | (u8)((lr_status_evt_portid & 0x0F000000) >> 24); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3423 | struct sas_ha_struct *sas_ha = pm8001_ha->sas; |
| 3424 | struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3425 | struct pm8001_port *port = &pm8001_ha->port[port_id]; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3426 | struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3427 | PM8001_DEV_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3428 | pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n", |
| 3429 | port_id, phy_id, eventType, status)); |
| 3430 | |
| 3431 | switch (eventType) { |
| 3432 | |
| 3433 | case HW_EVENT_SAS_PHY_UP: |
| 3434 | PM8001_MSG_DBG(pm8001_ha, |
| 3435 | pm8001_printk("HW_EVENT_PHY_START_STATUS\n")); |
| 3436 | hw_event_sas_phy_up(pm8001_ha, piomb); |
| 3437 | break; |
| 3438 | case HW_EVENT_SATA_PHY_UP: |
| 3439 | PM8001_MSG_DBG(pm8001_ha, |
| 3440 | pm8001_printk("HW_EVENT_SATA_PHY_UP\n")); |
| 3441 | hw_event_sata_phy_up(pm8001_ha, piomb); |
| 3442 | break; |
| 3443 | case HW_EVENT_SATA_SPINUP_HOLD: |
| 3444 | PM8001_MSG_DBG(pm8001_ha, |
| 3445 | pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n")); |
| 3446 | sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); |
| 3447 | break; |
| 3448 | case HW_EVENT_PHY_DOWN: |
| 3449 | PM8001_MSG_DBG(pm8001_ha, |
| 3450 | pm8001_printk("HW_EVENT_PHY_DOWN\n")); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3451 | hw_event_phy_down(pm8001_ha, piomb); |
| 3452 | if (pm8001_ha->reset_in_progress) { |
| 3453 | PM8001_MSG_DBG(pm8001_ha, |
| 3454 | pm8001_printk("Reset in progress\n")); |
| 3455 | return 0; |
| 3456 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3457 | phy->phy_attached = 0; |
Deepak Ukey | cd13575 | 2018-09-11 14:18:02 +0530 | [diff] [blame] | 3458 | phy->phy_state = PHY_LINK_DISABLE; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3459 | break; |
| 3460 | case HW_EVENT_PORT_INVALID: |
| 3461 | PM8001_MSG_DBG(pm8001_ha, |
| 3462 | pm8001_printk("HW_EVENT_PORT_INVALID\n")); |
| 3463 | sas_phy_disconnected(sas_phy); |
| 3464 | phy->phy_attached = 0; |
| 3465 | sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); |
| 3466 | break; |
| 3467 | /* the broadcast change primitive received, tell the LIBSAS this event |
| 3468 | to revalidate the sas domain*/ |
| 3469 | case HW_EVENT_BROADCAST_CHANGE: |
| 3470 | PM8001_MSG_DBG(pm8001_ha, |
| 3471 | pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n")); |
| 3472 | pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE, |
| 3473 | port_id, phy_id, 1, 0); |
| 3474 | spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); |
| 3475 | sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE; |
| 3476 | spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); |
| 3477 | sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); |
| 3478 | break; |
| 3479 | case HW_EVENT_PHY_ERROR: |
| 3480 | PM8001_MSG_DBG(pm8001_ha, |
| 3481 | pm8001_printk("HW_EVENT_PHY_ERROR\n")); |
| 3482 | sas_phy_disconnected(&phy->sas_phy); |
| 3483 | phy->phy_attached = 0; |
| 3484 | sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); |
| 3485 | break; |
| 3486 | case HW_EVENT_BROADCAST_EXP: |
| 3487 | PM8001_MSG_DBG(pm8001_ha, |
| 3488 | pm8001_printk("HW_EVENT_BROADCAST_EXP\n")); |
| 3489 | spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); |
| 3490 | sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP; |
| 3491 | spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); |
| 3492 | sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); |
| 3493 | break; |
| 3494 | case HW_EVENT_LINK_ERR_INVALID_DWORD: |
| 3495 | PM8001_MSG_DBG(pm8001_ha, |
| 3496 | pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n")); |
| 3497 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3498 | HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3499 | break; |
| 3500 | case HW_EVENT_LINK_ERR_DISPARITY_ERROR: |
| 3501 | PM8001_MSG_DBG(pm8001_ha, |
| 3502 | pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n")); |
| 3503 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3504 | HW_EVENT_LINK_ERR_DISPARITY_ERROR, |
| 3505 | port_id, phy_id, 0, 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3506 | break; |
| 3507 | case HW_EVENT_LINK_ERR_CODE_VIOLATION: |
| 3508 | PM8001_MSG_DBG(pm8001_ha, |
| 3509 | pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n")); |
| 3510 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3511 | HW_EVENT_LINK_ERR_CODE_VIOLATION, |
| 3512 | port_id, phy_id, 0, 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3513 | break; |
| 3514 | case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH: |
| 3515 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3516 | "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n")); |
| 3517 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3518 | HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH, |
| 3519 | port_id, phy_id, 0, 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3520 | break; |
| 3521 | case HW_EVENT_MALFUNCTION: |
| 3522 | PM8001_MSG_DBG(pm8001_ha, |
| 3523 | pm8001_printk("HW_EVENT_MALFUNCTION\n")); |
| 3524 | break; |
| 3525 | case HW_EVENT_BROADCAST_SES: |
| 3526 | PM8001_MSG_DBG(pm8001_ha, |
| 3527 | pm8001_printk("HW_EVENT_BROADCAST_SES\n")); |
| 3528 | spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); |
| 3529 | sas_phy->sas_prim = HW_EVENT_BROADCAST_SES; |
| 3530 | spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); |
| 3531 | sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); |
| 3532 | break; |
| 3533 | case HW_EVENT_INBOUND_CRC_ERROR: |
| 3534 | PM8001_MSG_DBG(pm8001_ha, |
| 3535 | pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n")); |
| 3536 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3537 | HW_EVENT_INBOUND_CRC_ERROR, |
| 3538 | port_id, phy_id, 0, 0); |
| 3539 | break; |
| 3540 | case HW_EVENT_HARD_RESET_RECEIVED: |
| 3541 | PM8001_MSG_DBG(pm8001_ha, |
| 3542 | pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n")); |
| 3543 | sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); |
| 3544 | break; |
| 3545 | case HW_EVENT_ID_FRAME_TIMEOUT: |
| 3546 | PM8001_MSG_DBG(pm8001_ha, |
| 3547 | pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n")); |
| 3548 | sas_phy_disconnected(sas_phy); |
| 3549 | phy->phy_attached = 0; |
| 3550 | sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); |
| 3551 | break; |
| 3552 | case HW_EVENT_LINK_ERR_PHY_RESET_FAILED: |
| 3553 | PM8001_MSG_DBG(pm8001_ha, |
| 3554 | pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n")); |
| 3555 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3556 | HW_EVENT_LINK_ERR_PHY_RESET_FAILED, |
| 3557 | port_id, phy_id, 0, 0); |
| 3558 | sas_phy_disconnected(sas_phy); |
| 3559 | phy->phy_attached = 0; |
| 3560 | sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); |
| 3561 | break; |
| 3562 | case HW_EVENT_PORT_RESET_TIMER_TMO: |
| 3563 | PM8001_MSG_DBG(pm8001_ha, |
| 3564 | pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n")); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3565 | pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, |
| 3566 | port_id, phy_id, 0, 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3567 | sas_phy_disconnected(sas_phy); |
| 3568 | phy->phy_attached = 0; |
| 3569 | sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3570 | if (pm8001_ha->phy[phy_id].reset_completion) { |
| 3571 | pm8001_ha->phy[phy_id].port_reset_status = |
| 3572 | PORT_RESET_TMO; |
| 3573 | complete(pm8001_ha->phy[phy_id].reset_completion); |
| 3574 | pm8001_ha->phy[phy_id].reset_completion = NULL; |
| 3575 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3576 | break; |
| 3577 | case HW_EVENT_PORT_RECOVERY_TIMER_TMO: |
| 3578 | PM8001_MSG_DBG(pm8001_ha, |
| 3579 | pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n")); |
Sakthivel K | a6cb3d0 | 2013-03-19 18:08:40 +0530 | [diff] [blame] | 3580 | pm80xx_hw_event_ack_req(pm8001_ha, 0, |
| 3581 | HW_EVENT_PORT_RECOVERY_TIMER_TMO, |
| 3582 | port_id, phy_id, 0, 0); |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3583 | for (i = 0; i < pm8001_ha->chip->n_phy; i++) { |
| 3584 | if (port->wide_port_phymap & (1 << i)) { |
| 3585 | phy = &pm8001_ha->phy[i]; |
| 3586 | sas_ha->notify_phy_event(&phy->sas_phy, |
| 3587 | PHYE_LOSS_OF_SIGNAL); |
| 3588 | port->wide_port_phymap &= ~(1 << i); |
| 3589 | } |
| 3590 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3591 | break; |
| 3592 | case HW_EVENT_PORT_RECOVER: |
| 3593 | PM8001_MSG_DBG(pm8001_ha, |
| 3594 | pm8001_printk("HW_EVENT_PORT_RECOVER\n")); |
Viswas G | 8414cd8 | 2015-08-11 15:06:30 +0530 | [diff] [blame] | 3595 | hw_event_port_recover(pm8001_ha, piomb); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3596 | break; |
| 3597 | case HW_EVENT_PORT_RESET_COMPLETE: |
| 3598 | PM8001_MSG_DBG(pm8001_ha, |
| 3599 | pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n")); |
Viswas G | 869ddbd | 2017-10-18 11:39:13 +0530 | [diff] [blame] | 3600 | if (pm8001_ha->phy[phy_id].reset_completion) { |
| 3601 | pm8001_ha->phy[phy_id].port_reset_status = |
| 3602 | PORT_RESET_SUCCESS; |
| 3603 | complete(pm8001_ha->phy[phy_id].reset_completion); |
| 3604 | pm8001_ha->phy[phy_id].reset_completion = NULL; |
| 3605 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3606 | break; |
| 3607 | case EVENT_BROADCAST_ASYNCH_EVENT: |
| 3608 | PM8001_MSG_DBG(pm8001_ha, |
| 3609 | pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n")); |
| 3610 | break; |
| 3611 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3612 | PM8001_DEVIO_DBG(pm8001_ha, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3613 | pm8001_printk("Unknown event type 0x%x\n", eventType)); |
| 3614 | break; |
| 3615 | } |
| 3616 | return 0; |
| 3617 | } |
| 3618 | |
| 3619 | /** |
| 3620 | * mpi_phy_stop_resp - SPCv specific |
| 3621 | * @pm8001_ha: our hba card information |
| 3622 | * @piomb: IO message buffer |
| 3623 | */ |
| 3624 | static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3625 | { |
| 3626 | struct phy_stop_resp *pPayload = |
| 3627 | (struct phy_stop_resp *)(piomb + 4); |
| 3628 | u32 status = |
| 3629 | le32_to_cpu(pPayload->status); |
| 3630 | u32 phyid = |
Deepak Ukey | cd13575 | 2018-09-11 14:18:02 +0530 | [diff] [blame] | 3631 | le32_to_cpu(pPayload->phyid) & 0xFF; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3632 | struct pm8001_phy *phy = &pm8001_ha->phy[phyid]; |
| 3633 | PM8001_MSG_DBG(pm8001_ha, |
| 3634 | pm8001_printk("phy:0x%x status:0x%x\n", |
| 3635 | phyid, status)); |
Deepak Ukey | cd13575 | 2018-09-11 14:18:02 +0530 | [diff] [blame] | 3636 | if (status == PHY_STOP_SUCCESS || |
| 3637 | status == PHY_STOP_ERR_DEVICE_ATTACHED) |
| 3638 | phy->phy_state = PHY_LINK_DISABLE; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3639 | return 0; |
| 3640 | } |
| 3641 | |
| 3642 | /** |
| 3643 | * mpi_set_controller_config_resp - SPCv specific |
| 3644 | * @pm8001_ha: our hba card information |
| 3645 | * @piomb: IO message buffer |
| 3646 | */ |
| 3647 | static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha, |
| 3648 | void *piomb) |
| 3649 | { |
| 3650 | struct set_ctrl_cfg_resp *pPayload = |
| 3651 | (struct set_ctrl_cfg_resp *)(piomb + 4); |
| 3652 | u32 status = le32_to_cpu(pPayload->status); |
| 3653 | u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd); |
| 3654 | |
| 3655 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3656 | "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n", |
| 3657 | status, err_qlfr_pgcd)); |
| 3658 | |
| 3659 | return 0; |
| 3660 | } |
| 3661 | |
| 3662 | /** |
| 3663 | * mpi_get_controller_config_resp - SPCv specific |
| 3664 | * @pm8001_ha: our hba card information |
| 3665 | * @piomb: IO message buffer |
| 3666 | */ |
| 3667 | static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha, |
| 3668 | void *piomb) |
| 3669 | { |
| 3670 | PM8001_MSG_DBG(pm8001_ha, |
| 3671 | pm8001_printk(" pm80xx_addition_functionality\n")); |
| 3672 | |
| 3673 | return 0; |
| 3674 | } |
| 3675 | |
| 3676 | /** |
| 3677 | * mpi_get_phy_profile_resp - SPCv specific |
| 3678 | * @pm8001_ha: our hba card information |
| 3679 | * @piomb: IO message buffer |
| 3680 | */ |
| 3681 | static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha, |
| 3682 | void *piomb) |
| 3683 | { |
| 3684 | PM8001_MSG_DBG(pm8001_ha, |
| 3685 | pm8001_printk(" pm80xx_addition_functionality\n")); |
| 3686 | |
| 3687 | return 0; |
| 3688 | } |
| 3689 | |
| 3690 | /** |
| 3691 | * mpi_flash_op_ext_resp - SPCv specific |
| 3692 | * @pm8001_ha: our hba card information |
| 3693 | * @piomb: IO message buffer |
| 3694 | */ |
| 3695 | static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3696 | { |
| 3697 | PM8001_MSG_DBG(pm8001_ha, |
| 3698 | pm8001_printk(" pm80xx_addition_functionality\n")); |
| 3699 | |
| 3700 | return 0; |
| 3701 | } |
| 3702 | |
| 3703 | /** |
| 3704 | * mpi_set_phy_profile_resp - SPCv specific |
| 3705 | * @pm8001_ha: our hba card information |
| 3706 | * @piomb: IO message buffer |
| 3707 | */ |
| 3708 | static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha, |
| 3709 | void *piomb) |
| 3710 | { |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 3711 | u8 page_code; |
| 3712 | struct set_phy_profile_resp *pPayload = |
| 3713 | (struct set_phy_profile_resp *)(piomb + 4); |
| 3714 | u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid); |
| 3715 | u32 status = le32_to_cpu(pPayload->status); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3716 | |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 3717 | page_code = (u8)((ppc_phyid & 0xFF00) >> 8); |
| 3718 | if (status) { |
| 3719 | /* status is FAILED */ |
| 3720 | PM8001_FAIL_DBG(pm8001_ha, |
| 3721 | pm8001_printk("PhyProfile command failed with status " |
| 3722 | "0x%08X \n", status)); |
| 3723 | return -1; |
| 3724 | } else { |
| 3725 | if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) { |
| 3726 | PM8001_FAIL_DBG(pm8001_ha, |
| 3727 | pm8001_printk("Invalid page code 0x%X\n", |
| 3728 | page_code)); |
| 3729 | return -1; |
| 3730 | } |
| 3731 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3732 | return 0; |
| 3733 | } |
| 3734 | |
| 3735 | /** |
| 3736 | * mpi_kek_management_resp - SPCv specific |
| 3737 | * @pm8001_ha: our hba card information |
| 3738 | * @piomb: IO message buffer |
| 3739 | */ |
| 3740 | static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha, |
| 3741 | void *piomb) |
| 3742 | { |
| 3743 | struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4); |
| 3744 | |
| 3745 | u32 status = le32_to_cpu(pPayload->status); |
| 3746 | u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop); |
| 3747 | u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr); |
| 3748 | |
| 3749 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3750 | "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n", |
| 3751 | status, kidx_new_curr_ksop, err_qlfr)); |
| 3752 | |
| 3753 | return 0; |
| 3754 | } |
| 3755 | |
| 3756 | /** |
| 3757 | * mpi_dek_management_resp - SPCv specific |
| 3758 | * @pm8001_ha: our hba card information |
| 3759 | * @piomb: IO message buffer |
| 3760 | */ |
| 3761 | static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha, |
| 3762 | void *piomb) |
| 3763 | { |
| 3764 | PM8001_MSG_DBG(pm8001_ha, |
| 3765 | pm8001_printk(" pm80xx_addition_functionality\n")); |
| 3766 | |
| 3767 | return 0; |
| 3768 | } |
| 3769 | |
| 3770 | /** |
| 3771 | * ssp_coalesced_comp_resp - SPCv specific |
| 3772 | * @pm8001_ha: our hba card information |
| 3773 | * @piomb: IO message buffer |
| 3774 | */ |
| 3775 | static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha, |
| 3776 | void *piomb) |
| 3777 | { |
| 3778 | PM8001_MSG_DBG(pm8001_ha, |
| 3779 | pm8001_printk(" pm80xx_addition_functionality\n")); |
| 3780 | |
| 3781 | return 0; |
| 3782 | } |
| 3783 | |
| 3784 | /** |
| 3785 | * process_one_iomb - process one outbound Queue memory block |
| 3786 | * @pm8001_ha: our hba card information |
| 3787 | * @piomb: IO message buffer |
| 3788 | */ |
| 3789 | static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) |
| 3790 | { |
| 3791 | __le32 pHeader = *(__le32 *)piomb; |
| 3792 | u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF); |
| 3793 | |
| 3794 | switch (opc) { |
| 3795 | case OPC_OUB_ECHO: |
| 3796 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n")); |
| 3797 | break; |
| 3798 | case OPC_OUB_HW_EVENT: |
| 3799 | PM8001_MSG_DBG(pm8001_ha, |
| 3800 | pm8001_printk("OPC_OUB_HW_EVENT\n")); |
| 3801 | mpi_hw_event(pm8001_ha, piomb); |
| 3802 | break; |
| 3803 | case OPC_OUB_THERM_HW_EVENT: |
| 3804 | PM8001_MSG_DBG(pm8001_ha, |
| 3805 | pm8001_printk("OPC_OUB_THERMAL_EVENT\n")); |
| 3806 | mpi_thermal_hw_event(pm8001_ha, piomb); |
| 3807 | break; |
| 3808 | case OPC_OUB_SSP_COMP: |
| 3809 | PM8001_MSG_DBG(pm8001_ha, |
| 3810 | pm8001_printk("OPC_OUB_SSP_COMP\n")); |
| 3811 | mpi_ssp_completion(pm8001_ha, piomb); |
| 3812 | break; |
| 3813 | case OPC_OUB_SMP_COMP: |
| 3814 | PM8001_MSG_DBG(pm8001_ha, |
| 3815 | pm8001_printk("OPC_OUB_SMP_COMP\n")); |
| 3816 | mpi_smp_completion(pm8001_ha, piomb); |
| 3817 | break; |
| 3818 | case OPC_OUB_LOCAL_PHY_CNTRL: |
| 3819 | PM8001_MSG_DBG(pm8001_ha, |
| 3820 | pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n")); |
| 3821 | pm8001_mpi_local_phy_ctl(pm8001_ha, piomb); |
| 3822 | break; |
| 3823 | case OPC_OUB_DEV_REGIST: |
| 3824 | PM8001_MSG_DBG(pm8001_ha, |
| 3825 | pm8001_printk("OPC_OUB_DEV_REGIST\n")); |
| 3826 | pm8001_mpi_reg_resp(pm8001_ha, piomb); |
| 3827 | break; |
| 3828 | case OPC_OUB_DEREG_DEV: |
| 3829 | PM8001_MSG_DBG(pm8001_ha, |
Masanari Iida | 8b513d0 | 2013-05-21 23:13:12 +0900 | [diff] [blame] | 3830 | pm8001_printk("unregister the device\n")); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3831 | pm8001_mpi_dereg_resp(pm8001_ha, piomb); |
| 3832 | break; |
| 3833 | case OPC_OUB_GET_DEV_HANDLE: |
| 3834 | PM8001_MSG_DBG(pm8001_ha, |
| 3835 | pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n")); |
| 3836 | break; |
| 3837 | case OPC_OUB_SATA_COMP: |
| 3838 | PM8001_MSG_DBG(pm8001_ha, |
| 3839 | pm8001_printk("OPC_OUB_SATA_COMP\n")); |
| 3840 | mpi_sata_completion(pm8001_ha, piomb); |
| 3841 | break; |
| 3842 | case OPC_OUB_SATA_EVENT: |
| 3843 | PM8001_MSG_DBG(pm8001_ha, |
| 3844 | pm8001_printk("OPC_OUB_SATA_EVENT\n")); |
| 3845 | mpi_sata_event(pm8001_ha, piomb); |
| 3846 | break; |
| 3847 | case OPC_OUB_SSP_EVENT: |
| 3848 | PM8001_MSG_DBG(pm8001_ha, |
| 3849 | pm8001_printk("OPC_OUB_SSP_EVENT\n")); |
| 3850 | mpi_ssp_event(pm8001_ha, piomb); |
| 3851 | break; |
| 3852 | case OPC_OUB_DEV_HANDLE_ARRIV: |
| 3853 | PM8001_MSG_DBG(pm8001_ha, |
| 3854 | pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n")); |
| 3855 | /*This is for target*/ |
| 3856 | break; |
| 3857 | case OPC_OUB_SSP_RECV_EVENT: |
| 3858 | PM8001_MSG_DBG(pm8001_ha, |
| 3859 | pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n")); |
| 3860 | /*This is for target*/ |
| 3861 | break; |
| 3862 | case OPC_OUB_FW_FLASH_UPDATE: |
| 3863 | PM8001_MSG_DBG(pm8001_ha, |
| 3864 | pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n")); |
| 3865 | pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb); |
| 3866 | break; |
| 3867 | case OPC_OUB_GPIO_RESPONSE: |
| 3868 | PM8001_MSG_DBG(pm8001_ha, |
| 3869 | pm8001_printk("OPC_OUB_GPIO_RESPONSE\n")); |
| 3870 | break; |
| 3871 | case OPC_OUB_GPIO_EVENT: |
| 3872 | PM8001_MSG_DBG(pm8001_ha, |
| 3873 | pm8001_printk("OPC_OUB_GPIO_EVENT\n")); |
| 3874 | break; |
| 3875 | case OPC_OUB_GENERAL_EVENT: |
| 3876 | PM8001_MSG_DBG(pm8001_ha, |
| 3877 | pm8001_printk("OPC_OUB_GENERAL_EVENT\n")); |
| 3878 | pm8001_mpi_general_event(pm8001_ha, piomb); |
| 3879 | break; |
| 3880 | case OPC_OUB_SSP_ABORT_RSP: |
| 3881 | PM8001_MSG_DBG(pm8001_ha, |
| 3882 | pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n")); |
| 3883 | pm8001_mpi_task_abort_resp(pm8001_ha, piomb); |
| 3884 | break; |
| 3885 | case OPC_OUB_SATA_ABORT_RSP: |
| 3886 | PM8001_MSG_DBG(pm8001_ha, |
| 3887 | pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n")); |
| 3888 | pm8001_mpi_task_abort_resp(pm8001_ha, piomb); |
| 3889 | break; |
| 3890 | case OPC_OUB_SAS_DIAG_MODE_START_END: |
| 3891 | PM8001_MSG_DBG(pm8001_ha, |
| 3892 | pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n")); |
| 3893 | break; |
| 3894 | case OPC_OUB_SAS_DIAG_EXECUTE: |
| 3895 | PM8001_MSG_DBG(pm8001_ha, |
| 3896 | pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n")); |
| 3897 | break; |
| 3898 | case OPC_OUB_GET_TIME_STAMP: |
| 3899 | PM8001_MSG_DBG(pm8001_ha, |
| 3900 | pm8001_printk("OPC_OUB_GET_TIME_STAMP\n")); |
| 3901 | break; |
| 3902 | case OPC_OUB_SAS_HW_EVENT_ACK: |
| 3903 | PM8001_MSG_DBG(pm8001_ha, |
| 3904 | pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n")); |
| 3905 | break; |
| 3906 | case OPC_OUB_PORT_CONTROL: |
| 3907 | PM8001_MSG_DBG(pm8001_ha, |
| 3908 | pm8001_printk("OPC_OUB_PORT_CONTROL\n")); |
| 3909 | break; |
| 3910 | case OPC_OUB_SMP_ABORT_RSP: |
| 3911 | PM8001_MSG_DBG(pm8001_ha, |
| 3912 | pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n")); |
| 3913 | pm8001_mpi_task_abort_resp(pm8001_ha, piomb); |
| 3914 | break; |
| 3915 | case OPC_OUB_GET_NVMD_DATA: |
| 3916 | PM8001_MSG_DBG(pm8001_ha, |
| 3917 | pm8001_printk("OPC_OUB_GET_NVMD_DATA\n")); |
| 3918 | pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb); |
| 3919 | break; |
| 3920 | case OPC_OUB_SET_NVMD_DATA: |
| 3921 | PM8001_MSG_DBG(pm8001_ha, |
| 3922 | pm8001_printk("OPC_OUB_SET_NVMD_DATA\n")); |
| 3923 | pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb); |
| 3924 | break; |
| 3925 | case OPC_OUB_DEVICE_HANDLE_REMOVAL: |
| 3926 | PM8001_MSG_DBG(pm8001_ha, |
| 3927 | pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n")); |
| 3928 | break; |
| 3929 | case OPC_OUB_SET_DEVICE_STATE: |
| 3930 | PM8001_MSG_DBG(pm8001_ha, |
| 3931 | pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n")); |
| 3932 | pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb); |
| 3933 | break; |
| 3934 | case OPC_OUB_GET_DEVICE_STATE: |
| 3935 | PM8001_MSG_DBG(pm8001_ha, |
| 3936 | pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n")); |
| 3937 | break; |
| 3938 | case OPC_OUB_SET_DEV_INFO: |
| 3939 | PM8001_MSG_DBG(pm8001_ha, |
| 3940 | pm8001_printk("OPC_OUB_SET_DEV_INFO\n")); |
| 3941 | break; |
| 3942 | /* spcv specifc commands */ |
| 3943 | case OPC_OUB_PHY_START_RESP: |
| 3944 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3945 | "OPC_OUB_PHY_START_RESP opcode:%x\n", opc)); |
| 3946 | mpi_phy_start_resp(pm8001_ha, piomb); |
| 3947 | break; |
| 3948 | case OPC_OUB_PHY_STOP_RESP: |
| 3949 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3950 | "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc)); |
| 3951 | mpi_phy_stop_resp(pm8001_ha, piomb); |
| 3952 | break; |
| 3953 | case OPC_OUB_SET_CONTROLLER_CONFIG: |
| 3954 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3955 | "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc)); |
| 3956 | mpi_set_controller_config_resp(pm8001_ha, piomb); |
| 3957 | break; |
| 3958 | case OPC_OUB_GET_CONTROLLER_CONFIG: |
| 3959 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3960 | "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc)); |
| 3961 | mpi_get_controller_config_resp(pm8001_ha, piomb); |
| 3962 | break; |
| 3963 | case OPC_OUB_GET_PHY_PROFILE: |
| 3964 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3965 | "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc)); |
| 3966 | mpi_get_phy_profile_resp(pm8001_ha, piomb); |
| 3967 | break; |
| 3968 | case OPC_OUB_FLASH_OP_EXT: |
| 3969 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3970 | "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc)); |
| 3971 | mpi_flash_op_ext_resp(pm8001_ha, piomb); |
| 3972 | break; |
| 3973 | case OPC_OUB_SET_PHY_PROFILE: |
| 3974 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3975 | "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc)); |
| 3976 | mpi_set_phy_profile_resp(pm8001_ha, piomb); |
| 3977 | break; |
| 3978 | case OPC_OUB_KEK_MANAGEMENT_RESP: |
| 3979 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3980 | "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc)); |
| 3981 | mpi_kek_management_resp(pm8001_ha, piomb); |
| 3982 | break; |
| 3983 | case OPC_OUB_DEK_MANAGEMENT_RESP: |
| 3984 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3985 | "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc)); |
| 3986 | mpi_dek_management_resp(pm8001_ha, piomb); |
| 3987 | break; |
| 3988 | case OPC_OUB_SSP_COALESCED_COMP_RESP: |
| 3989 | PM8001_MSG_DBG(pm8001_ha, pm8001_printk( |
| 3990 | "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc)); |
| 3991 | ssp_coalesced_comp_resp(pm8001_ha, piomb); |
| 3992 | break; |
| 3993 | default: |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 3994 | PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 3995 | "Unknown outbound Queue IOMB OPC = 0x%x\n", opc)); |
| 3996 | break; |
| 3997 | } |
| 3998 | } |
| 3999 | |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 4000 | static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha) |
| 4001 | { |
| 4002 | PM8001_FAIL_DBG(pm8001_ha, |
| 4003 | pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n", |
| 4004 | pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0))); |
| 4005 | PM8001_FAIL_DBG(pm8001_ha, |
| 4006 | pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n", |
| 4007 | pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1))); |
| 4008 | PM8001_FAIL_DBG(pm8001_ha, |
| 4009 | pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n", |
| 4010 | pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2))); |
| 4011 | PM8001_FAIL_DBG(pm8001_ha, |
| 4012 | pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n", |
| 4013 | pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); |
| 4014 | PM8001_FAIL_DBG(pm8001_ha, |
| 4015 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n", |
| 4016 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0))); |
| 4017 | PM8001_FAIL_DBG(pm8001_ha, |
| 4018 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n", |
| 4019 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1))); |
| 4020 | PM8001_FAIL_DBG(pm8001_ha, |
| 4021 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n", |
| 4022 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2))); |
| 4023 | PM8001_FAIL_DBG(pm8001_ha, |
| 4024 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n", |
| 4025 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3))); |
| 4026 | PM8001_FAIL_DBG(pm8001_ha, |
| 4027 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n", |
| 4028 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4))); |
| 4029 | PM8001_FAIL_DBG(pm8001_ha, |
| 4030 | pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n", |
| 4031 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5))); |
| 4032 | PM8001_FAIL_DBG(pm8001_ha, |
| 4033 | pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n", |
| 4034 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6))); |
| 4035 | PM8001_FAIL_DBG(pm8001_ha, |
| 4036 | pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n", |
| 4037 | pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7))); |
| 4038 | } |
| 4039 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4040 | static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec) |
| 4041 | { |
| 4042 | struct outbound_queue_table *circularQ; |
| 4043 | void *pMsg1 = NULL; |
| 4044 | u8 uninitialized_var(bc); |
| 4045 | u32 ret = MPI_IO_STATUS_FAIL; |
| 4046 | unsigned long flags; |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 4047 | u32 regval; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4048 | |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 4049 | if (vec == (pm8001_ha->number_of_intr - 1)) { |
| 4050 | regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); |
| 4051 | if ((regval & SCRATCH_PAD_MIPSALL_READY) != |
| 4052 | SCRATCH_PAD_MIPSALL_READY) { |
| 4053 | pm8001_ha->controller_fatal_error = true; |
| 4054 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( |
| 4055 | "Firmware Fatal error! Regval:0x%x\n", regval)); |
| 4056 | print_scratchpad_registers(pm8001_ha); |
| 4057 | return ret; |
| 4058 | } |
| 4059 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4060 | spin_lock_irqsave(&pm8001_ha->lock, flags); |
| 4061 | circularQ = &pm8001_ha->outbnd_q_tbl[vec]; |
| 4062 | do { |
Deepak Ukey | 72349b6 | 2018-09-11 14:18:04 +0530 | [diff] [blame] | 4063 | /* spurious interrupt during setup if kexec-ing and |
| 4064 | * driver doing a doorbell access w/ the pre-kexec oq |
| 4065 | * interrupt setup. |
| 4066 | */ |
| 4067 | if (!circularQ->pi_virt) |
| 4068 | break; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4069 | ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc); |
| 4070 | if (MPI_IO_STATUS_SUCCESS == ret) { |
| 4071 | /* process the outbound message */ |
| 4072 | process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4)); |
| 4073 | /* free the message from the outbound circular buffer */ |
| 4074 | pm8001_mpi_msg_free_set(pm8001_ha, pMsg1, |
| 4075 | circularQ, bc); |
| 4076 | } |
| 4077 | if (MPI_IO_STATUS_BUSY == ret) { |
| 4078 | /* Update the producer index from SPC */ |
| 4079 | circularQ->producer_index = |
| 4080 | cpu_to_le32(pm8001_read_32(circularQ->pi_virt)); |
| 4081 | if (le32_to_cpu(circularQ->producer_index) == |
| 4082 | circularQ->consumer_idx) |
| 4083 | /* OQ is empty */ |
| 4084 | break; |
| 4085 | } |
| 4086 | } while (1); |
| 4087 | spin_unlock_irqrestore(&pm8001_ha->lock, flags); |
| 4088 | return ret; |
| 4089 | } |
| 4090 | |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4091 | /* DMA_... to our direction translation. */ |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4092 | static const u8 data_dir_flags[] = { |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4093 | [DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */ |
| 4094 | [DMA_TO_DEVICE] = DATA_DIR_OUT, /* OUTBOUND */ |
| 4095 | [DMA_FROM_DEVICE] = DATA_DIR_IN, /* INBOUND */ |
| 4096 | [DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */ |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4097 | }; |
| 4098 | |
| 4099 | static void build_smp_cmd(u32 deviceID, __le32 hTag, |
| 4100 | struct smp_req *psmp_cmd, int mode, int length) |
| 4101 | { |
| 4102 | psmp_cmd->tag = hTag; |
| 4103 | psmp_cmd->device_id = cpu_to_le32(deviceID); |
| 4104 | if (mode == SMP_DIRECT) { |
| 4105 | length = length - 4; /* subtract crc */ |
| 4106 | psmp_cmd->len_ip_ir = cpu_to_le32(length << 16); |
| 4107 | } else { |
| 4108 | psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1)); |
| 4109 | } |
| 4110 | } |
| 4111 | |
| 4112 | /** |
| 4113 | * pm8001_chip_smp_req - send a SMP task to FW |
| 4114 | * @pm8001_ha: our hba card information. |
| 4115 | * @ccb: the ccb information this request used. |
| 4116 | */ |
| 4117 | static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha, |
| 4118 | struct pm8001_ccb_info *ccb) |
| 4119 | { |
| 4120 | int elem, rc; |
| 4121 | struct sas_task *task = ccb->task; |
| 4122 | struct domain_device *dev = task->dev; |
| 4123 | struct pm8001_device *pm8001_dev = dev->lldd_dev; |
| 4124 | struct scatterlist *sg_req, *sg_resp; |
| 4125 | u32 req_len, resp_len; |
| 4126 | struct smp_req smp_cmd; |
| 4127 | u32 opc; |
| 4128 | struct inbound_queue_table *circularQ; |
| 4129 | char *preq_dma_addr = NULL; |
| 4130 | __le64 tmp_addr; |
| 4131 | u32 i, length; |
| 4132 | |
| 4133 | memset(&smp_cmd, 0, sizeof(smp_cmd)); |
| 4134 | /* |
| 4135 | * DMA-map SMP request, response buffers |
| 4136 | */ |
| 4137 | sg_req = &task->smp_task.smp_req; |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4138 | elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, DMA_TO_DEVICE); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4139 | if (!elem) |
| 4140 | return -ENOMEM; |
| 4141 | req_len = sg_dma_len(sg_req); |
| 4142 | |
| 4143 | sg_resp = &task->smp_task.smp_resp; |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4144 | elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, DMA_FROM_DEVICE); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4145 | if (!elem) { |
| 4146 | rc = -ENOMEM; |
| 4147 | goto err_out; |
| 4148 | } |
| 4149 | resp_len = sg_dma_len(sg_resp); |
| 4150 | /* must be in dwords */ |
| 4151 | if ((req_len & 0x3) || (resp_len & 0x3)) { |
| 4152 | rc = -EINVAL; |
| 4153 | goto err_out_2; |
| 4154 | } |
| 4155 | |
| 4156 | opc = OPC_INB_SMP_REQUEST; |
| 4157 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4158 | smp_cmd.tag = cpu_to_le32(ccb->ccb_tag); |
| 4159 | |
| 4160 | length = sg_req->length; |
| 4161 | PM8001_IO_DBG(pm8001_ha, |
| 4162 | pm8001_printk("SMP Frame Length %d\n", sg_req->length)); |
| 4163 | if (!(length - 8)) |
| 4164 | pm8001_ha->smp_exp_mode = SMP_DIRECT; |
| 4165 | else |
| 4166 | pm8001_ha->smp_exp_mode = SMP_INDIRECT; |
| 4167 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4168 | |
| 4169 | tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req)); |
| 4170 | preq_dma_addr = (char *)phys_to_virt(tmp_addr); |
| 4171 | |
| 4172 | /* INDIRECT MODE command settings. Use DMA */ |
| 4173 | if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) { |
| 4174 | PM8001_IO_DBG(pm8001_ha, |
| 4175 | pm8001_printk("SMP REQUEST INDIRECT MODE\n")); |
| 4176 | /* for SPCv indirect mode. Place the top 4 bytes of |
| 4177 | * SMP Request header here. */ |
| 4178 | for (i = 0; i < 4; i++) |
| 4179 | smp_cmd.smp_req16[i] = *(preq_dma_addr + i); |
| 4180 | /* exclude top 4 bytes for SMP req header */ |
| 4181 | smp_cmd.long_smp_req.long_req_addr = |
| 4182 | cpu_to_le64((u64)sg_dma_address |
Anand Kumar Santhanam | cb993e5 | 2013-09-17 14:37:14 +0530 | [diff] [blame] | 4183 | (&task->smp_task.smp_req) + 4); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4184 | /* exclude 4 bytes for SMP req header and CRC */ |
| 4185 | smp_cmd.long_smp_req.long_req_size = |
| 4186 | cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8); |
| 4187 | smp_cmd.long_smp_req.long_resp_addr = |
| 4188 | cpu_to_le64((u64)sg_dma_address |
| 4189 | (&task->smp_task.smp_resp)); |
| 4190 | smp_cmd.long_smp_req.long_resp_size = |
| 4191 | cpu_to_le32((u32)sg_dma_len |
| 4192 | (&task->smp_task.smp_resp)-4); |
| 4193 | } else { /* DIRECT MODE */ |
| 4194 | smp_cmd.long_smp_req.long_req_addr = |
| 4195 | cpu_to_le64((u64)sg_dma_address |
| 4196 | (&task->smp_task.smp_req)); |
| 4197 | smp_cmd.long_smp_req.long_req_size = |
| 4198 | cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4); |
| 4199 | smp_cmd.long_smp_req.long_resp_addr = |
| 4200 | cpu_to_le64((u64)sg_dma_address |
| 4201 | (&task->smp_task.smp_resp)); |
| 4202 | smp_cmd.long_smp_req.long_resp_size = |
| 4203 | cpu_to_le32 |
| 4204 | ((u32)sg_dma_len(&task->smp_task.smp_resp)-4); |
| 4205 | } |
| 4206 | if (pm8001_ha->smp_exp_mode == SMP_DIRECT) { |
| 4207 | PM8001_IO_DBG(pm8001_ha, |
| 4208 | pm8001_printk("SMP REQUEST DIRECT MODE\n")); |
| 4209 | for (i = 0; i < length; i++) |
| 4210 | if (i < 16) { |
| 4211 | smp_cmd.smp_req16[i] = *(preq_dma_addr+i); |
| 4212 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4213 | "Byte[%d]:%x (DMA data:%x)\n", |
| 4214 | i, smp_cmd.smp_req16[i], |
| 4215 | *(preq_dma_addr))); |
| 4216 | } else { |
| 4217 | smp_cmd.smp_req[i] = *(preq_dma_addr+i); |
| 4218 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4219 | "Byte[%d]:%x (DMA data:%x)\n", |
| 4220 | i, smp_cmd.smp_req[i], |
| 4221 | *(preq_dma_addr))); |
| 4222 | } |
| 4223 | } |
| 4224 | |
| 4225 | build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, |
| 4226 | &smp_cmd, pm8001_ha->smp_exp_mode, length); |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4227 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &smp_cmd, |
| 4228 | sizeof(smp_cmd), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 4229 | if (rc) |
| 4230 | goto err_out_2; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4231 | return 0; |
| 4232 | |
| 4233 | err_out_2: |
| 4234 | dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1, |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4235 | DMA_FROM_DEVICE); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4236 | err_out: |
| 4237 | dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1, |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4238 | DMA_TO_DEVICE); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4239 | return rc; |
| 4240 | } |
| 4241 | |
| 4242 | static int check_enc_sas_cmd(struct sas_task *task) |
| 4243 | { |
James Bottomley | e73823f | 2013-05-07 15:38:18 -0700 | [diff] [blame] | 4244 | u8 cmd = task->ssp_task.cmd->cmnd[0]; |
| 4245 | |
| 4246 | if (cmd == READ_10 || cmd == WRITE_10 || cmd == WRITE_VERIFY) |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4247 | return 1; |
| 4248 | else |
| 4249 | return 0; |
| 4250 | } |
| 4251 | |
| 4252 | static int check_enc_sat_cmd(struct sas_task *task) |
| 4253 | { |
| 4254 | int ret = 0; |
| 4255 | switch (task->ata_task.fis.command) { |
| 4256 | case ATA_CMD_FPDMA_READ: |
| 4257 | case ATA_CMD_READ_EXT: |
| 4258 | case ATA_CMD_READ: |
| 4259 | case ATA_CMD_FPDMA_WRITE: |
| 4260 | case ATA_CMD_WRITE_EXT: |
| 4261 | case ATA_CMD_WRITE: |
| 4262 | case ATA_CMD_PIO_READ: |
| 4263 | case ATA_CMD_PIO_READ_EXT: |
| 4264 | case ATA_CMD_PIO_WRITE: |
| 4265 | case ATA_CMD_PIO_WRITE_EXT: |
| 4266 | ret = 1; |
| 4267 | break; |
| 4268 | default: |
| 4269 | ret = 0; |
| 4270 | break; |
| 4271 | } |
| 4272 | return ret; |
| 4273 | } |
| 4274 | |
| 4275 | /** |
| 4276 | * pm80xx_chip_ssp_io_req - send a SSP task to FW |
| 4277 | * @pm8001_ha: our hba card information. |
| 4278 | * @ccb: the ccb information this request used. |
| 4279 | */ |
| 4280 | static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, |
| 4281 | struct pm8001_ccb_info *ccb) |
| 4282 | { |
| 4283 | struct sas_task *task = ccb->task; |
| 4284 | struct domain_device *dev = task->dev; |
| 4285 | struct pm8001_device *pm8001_dev = dev->lldd_dev; |
| 4286 | struct ssp_ini_io_start_req ssp_cmd; |
| 4287 | u32 tag = ccb->ccb_tag; |
| 4288 | int ret; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4289 | u64 phys_addr, start_addr, end_addr; |
| 4290 | u32 end_addr_high, end_addr_low; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4291 | struct inbound_queue_table *circularQ; |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4292 | u32 q_index; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4293 | u32 opc = OPC_INB_SSPINIIOSTART; |
| 4294 | memset(&ssp_cmd, 0, sizeof(ssp_cmd)); |
| 4295 | memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8); |
| 4296 | /* data address domain added for spcv; set to 0 by host, |
| 4297 | * used internally by controller |
| 4298 | * 0 for SAS 1.1 and SAS 2.0 compatible TLR |
| 4299 | */ |
| 4300 | ssp_cmd.dad_dir_m_tlr = |
| 4301 | cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0); |
| 4302 | ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len); |
| 4303 | ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id); |
| 4304 | ssp_cmd.tag = cpu_to_le32(tag); |
| 4305 | if (task->ssp_task.enable_first_burst) |
| 4306 | ssp_cmd.ssp_iu.efb_prio_attr |= 0x80; |
| 4307 | ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3); |
| 4308 | ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7); |
James Bottomley | e73823f | 2013-05-07 15:38:18 -0700 | [diff] [blame] | 4309 | memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd, |
| 4310 | task->ssp_task.cmd->cmd_len); |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4311 | q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM; |
| 4312 | circularQ = &pm8001_ha->inbnd_q_tbl[q_index]; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4313 | |
| 4314 | /* Check if encryption is set */ |
| 4315 | if (pm8001_ha->chip->encrypt && |
| 4316 | !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) { |
| 4317 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4318 | "Encryption enabled.Sending Encrypt SAS command 0x%x\n", |
James Bottomley | e73823f | 2013-05-07 15:38:18 -0700 | [diff] [blame] | 4319 | task->ssp_task.cmd->cmnd[0])); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4320 | opc = OPC_INB_SSP_INI_DIF_ENC_IO; |
| 4321 | /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/ |
| 4322 | ssp_cmd.dad_dir_m_tlr = cpu_to_le32 |
| 4323 | ((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0); |
| 4324 | |
| 4325 | /* fill in PRD (scatter/gather) table, if any */ |
| 4326 | if (task->num_scatter > 1) { |
| 4327 | pm8001_chip_make_sg(task->scatter, |
| 4328 | ccb->n_elem, ccb->buf_prd); |
| 4329 | phys_addr = ccb->ccb_dma_handle + |
| 4330 | offsetof(struct pm8001_ccb_info, buf_prd[0]); |
| 4331 | ssp_cmd.enc_addr_low = |
| 4332 | cpu_to_le32(lower_32_bits(phys_addr)); |
| 4333 | ssp_cmd.enc_addr_high = |
| 4334 | cpu_to_le32(upper_32_bits(phys_addr)); |
| 4335 | ssp_cmd.enc_esgl = cpu_to_le32(1<<31); |
| 4336 | } else if (task->num_scatter == 1) { |
| 4337 | u64 dma_addr = sg_dma_address(task->scatter); |
| 4338 | ssp_cmd.enc_addr_low = |
| 4339 | cpu_to_le32(lower_32_bits(dma_addr)); |
| 4340 | ssp_cmd.enc_addr_high = |
| 4341 | cpu_to_le32(upper_32_bits(dma_addr)); |
| 4342 | ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len); |
| 4343 | ssp_cmd.enc_esgl = 0; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4344 | /* Check 4G Boundary */ |
| 4345 | start_addr = cpu_to_le64(dma_addr); |
| 4346 | end_addr = (start_addr + ssp_cmd.enc_len) - 1; |
| 4347 | end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); |
| 4348 | end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); |
| 4349 | if (end_addr_high != ssp_cmd.enc_addr_high) { |
| 4350 | PM8001_FAIL_DBG(pm8001_ha, |
| 4351 | pm8001_printk("The sg list address " |
| 4352 | "start_addr=0x%016llx data_len=0x%x " |
| 4353 | "end_addr_high=0x%08x end_addr_low=" |
| 4354 | "0x%08x has crossed 4G boundary\n", |
| 4355 | start_addr, ssp_cmd.enc_len, |
| 4356 | end_addr_high, end_addr_low)); |
| 4357 | pm8001_chip_make_sg(task->scatter, 1, |
| 4358 | ccb->buf_prd); |
| 4359 | phys_addr = ccb->ccb_dma_handle + |
| 4360 | offsetof(struct pm8001_ccb_info, |
| 4361 | buf_prd[0]); |
| 4362 | ssp_cmd.enc_addr_low = |
| 4363 | cpu_to_le32(lower_32_bits(phys_addr)); |
| 4364 | ssp_cmd.enc_addr_high = |
| 4365 | cpu_to_le32(upper_32_bits(phys_addr)); |
| 4366 | ssp_cmd.enc_esgl = cpu_to_le32(1<<31); |
| 4367 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4368 | } else if (task->num_scatter == 0) { |
| 4369 | ssp_cmd.enc_addr_low = 0; |
| 4370 | ssp_cmd.enc_addr_high = 0; |
| 4371 | ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len); |
| 4372 | ssp_cmd.enc_esgl = 0; |
| 4373 | } |
| 4374 | /* XTS mode. All other fields are 0 */ |
| 4375 | ssp_cmd.key_cmode = 0x6 << 4; |
| 4376 | /* set tweak values. Should be the start lba */ |
James Bottomley | e73823f | 2013-05-07 15:38:18 -0700 | [diff] [blame] | 4377 | ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) | |
| 4378 | (task->ssp_task.cmd->cmnd[3] << 16) | |
| 4379 | (task->ssp_task.cmd->cmnd[4] << 8) | |
| 4380 | (task->ssp_task.cmd->cmnd[5])); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4381 | } else { |
| 4382 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4383 | "Sending Normal SAS command 0x%x inb q %x\n", |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4384 | task->ssp_task.cmd->cmnd[0], q_index)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4385 | /* fill in PRD (scatter/gather) table, if any */ |
| 4386 | if (task->num_scatter > 1) { |
| 4387 | pm8001_chip_make_sg(task->scatter, ccb->n_elem, |
| 4388 | ccb->buf_prd); |
| 4389 | phys_addr = ccb->ccb_dma_handle + |
| 4390 | offsetof(struct pm8001_ccb_info, buf_prd[0]); |
| 4391 | ssp_cmd.addr_low = |
| 4392 | cpu_to_le32(lower_32_bits(phys_addr)); |
| 4393 | ssp_cmd.addr_high = |
| 4394 | cpu_to_le32(upper_32_bits(phys_addr)); |
| 4395 | ssp_cmd.esgl = cpu_to_le32(1<<31); |
| 4396 | } else if (task->num_scatter == 1) { |
| 4397 | u64 dma_addr = sg_dma_address(task->scatter); |
| 4398 | ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr)); |
| 4399 | ssp_cmd.addr_high = |
| 4400 | cpu_to_le32(upper_32_bits(dma_addr)); |
| 4401 | ssp_cmd.len = cpu_to_le32(task->total_xfer_len); |
| 4402 | ssp_cmd.esgl = 0; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4403 | /* Check 4G Boundary */ |
| 4404 | start_addr = cpu_to_le64(dma_addr); |
| 4405 | end_addr = (start_addr + ssp_cmd.len) - 1; |
| 4406 | end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); |
| 4407 | end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); |
| 4408 | if (end_addr_high != ssp_cmd.addr_high) { |
| 4409 | PM8001_FAIL_DBG(pm8001_ha, |
| 4410 | pm8001_printk("The sg list address " |
| 4411 | "start_addr=0x%016llx data_len=0x%x " |
| 4412 | "end_addr_high=0x%08x end_addr_low=" |
| 4413 | "0x%08x has crossed 4G boundary\n", |
| 4414 | start_addr, ssp_cmd.len, |
| 4415 | end_addr_high, end_addr_low)); |
| 4416 | pm8001_chip_make_sg(task->scatter, 1, |
| 4417 | ccb->buf_prd); |
| 4418 | phys_addr = ccb->ccb_dma_handle + |
| 4419 | offsetof(struct pm8001_ccb_info, |
| 4420 | buf_prd[0]); |
| 4421 | ssp_cmd.addr_low = |
| 4422 | cpu_to_le32(lower_32_bits(phys_addr)); |
| 4423 | ssp_cmd.addr_high = |
| 4424 | cpu_to_le32(upper_32_bits(phys_addr)); |
| 4425 | ssp_cmd.esgl = cpu_to_le32(1<<31); |
| 4426 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4427 | } else if (task->num_scatter == 0) { |
| 4428 | ssp_cmd.addr_low = 0; |
| 4429 | ssp_cmd.addr_high = 0; |
| 4430 | ssp_cmd.len = cpu_to_le32(task->total_xfer_len); |
| 4431 | ssp_cmd.esgl = 0; |
| 4432 | } |
| 4433 | } |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4434 | q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM; |
| 4435 | ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4436 | &ssp_cmd, sizeof(ssp_cmd), q_index); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4437 | return ret; |
| 4438 | } |
| 4439 | |
| 4440 | static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, |
| 4441 | struct pm8001_ccb_info *ccb) |
| 4442 | { |
| 4443 | struct sas_task *task = ccb->task; |
| 4444 | struct domain_device *dev = task->dev; |
| 4445 | struct pm8001_device *pm8001_ha_dev = dev->lldd_dev; |
| 4446 | u32 tag = ccb->ccb_tag; |
| 4447 | int ret; |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4448 | u32 q_index; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4449 | struct sata_start_req sata_cmd; |
| 4450 | u32 hdr_tag, ncg_tag = 0; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4451 | u64 phys_addr, start_addr, end_addr; |
| 4452 | u32 end_addr_high, end_addr_low; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4453 | u32 ATAP = 0x0; |
| 4454 | u32 dir; |
| 4455 | struct inbound_queue_table *circularQ; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4456 | unsigned long flags; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4457 | u32 opc = OPC_INB_SATA_HOST_OPSTART; |
| 4458 | memset(&sata_cmd, 0, sizeof(sata_cmd)); |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4459 | q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM; |
| 4460 | circularQ = &pm8001_ha->inbnd_q_tbl[q_index]; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4461 | |
Christoph Hellwig | f73bdeb | 2018-10-10 19:59:50 +0200 | [diff] [blame] | 4462 | if (task->data_dir == DMA_NONE) { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4463 | ATAP = 0x04; /* no data*/ |
| 4464 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n")); |
| 4465 | } else if (likely(!task->ata_task.device_control_reg_update)) { |
| 4466 | if (task->ata_task.dma_xfer) { |
| 4467 | ATAP = 0x06; /* DMA */ |
| 4468 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n")); |
| 4469 | } else { |
| 4470 | ATAP = 0x05; /* PIO*/ |
| 4471 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n")); |
| 4472 | } |
| 4473 | if (task->ata_task.use_ncq && |
Hannes Reinecke | 1cbd772 | 2014-11-05 13:08:20 +0100 | [diff] [blame] | 4474 | dev->sata_dev.class != ATA_DEV_ATAPI) { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4475 | ATAP = 0x07; /* FPDMA */ |
| 4476 | PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n")); |
| 4477 | } |
| 4478 | } |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4479 | if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) { |
| 4480 | task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4481 | ncg_tag = hdr_tag; |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4482 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4483 | dir = data_dir_flags[task->data_dir] << 8; |
| 4484 | sata_cmd.tag = cpu_to_le32(tag); |
| 4485 | sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); |
| 4486 | sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); |
| 4487 | |
| 4488 | sata_cmd.sata_fis = task->ata_task.fis; |
| 4489 | if (likely(!task->ata_task.device_control_reg_update)) |
| 4490 | sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ |
| 4491 | sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */ |
| 4492 | |
| 4493 | /* Check if encryption is set */ |
| 4494 | if (pm8001_ha->chip->encrypt && |
| 4495 | !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) { |
| 4496 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4497 | "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n", |
| 4498 | sata_cmd.sata_fis.command)); |
| 4499 | opc = OPC_INB_SATA_DIF_ENC_IO; |
| 4500 | |
| 4501 | /* set encryption bit */ |
| 4502 | sata_cmd.ncqtag_atap_dir_m_dad = |
| 4503 | cpu_to_le32(((ncg_tag & 0xff)<<16)| |
| 4504 | ((ATAP & 0x3f) << 10) | 0x20 | dir); |
| 4505 | /* dad (bit 0-1) is 0 */ |
| 4506 | /* fill in PRD (scatter/gather) table, if any */ |
| 4507 | if (task->num_scatter > 1) { |
| 4508 | pm8001_chip_make_sg(task->scatter, |
| 4509 | ccb->n_elem, ccb->buf_prd); |
| 4510 | phys_addr = ccb->ccb_dma_handle + |
| 4511 | offsetof(struct pm8001_ccb_info, buf_prd[0]); |
| 4512 | sata_cmd.enc_addr_low = lower_32_bits(phys_addr); |
| 4513 | sata_cmd.enc_addr_high = upper_32_bits(phys_addr); |
| 4514 | sata_cmd.enc_esgl = cpu_to_le32(1 << 31); |
| 4515 | } else if (task->num_scatter == 1) { |
| 4516 | u64 dma_addr = sg_dma_address(task->scatter); |
| 4517 | sata_cmd.enc_addr_low = lower_32_bits(dma_addr); |
| 4518 | sata_cmd.enc_addr_high = upper_32_bits(dma_addr); |
| 4519 | sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len); |
| 4520 | sata_cmd.enc_esgl = 0; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4521 | /* Check 4G Boundary */ |
| 4522 | start_addr = cpu_to_le64(dma_addr); |
| 4523 | end_addr = (start_addr + sata_cmd.enc_len) - 1; |
| 4524 | end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); |
| 4525 | end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); |
| 4526 | if (end_addr_high != sata_cmd.enc_addr_high) { |
| 4527 | PM8001_FAIL_DBG(pm8001_ha, |
| 4528 | pm8001_printk("The sg list address " |
| 4529 | "start_addr=0x%016llx data_len=0x%x " |
| 4530 | "end_addr_high=0x%08x end_addr_low" |
| 4531 | "=0x%08x has crossed 4G boundary\n", |
| 4532 | start_addr, sata_cmd.enc_len, |
| 4533 | end_addr_high, end_addr_low)); |
| 4534 | pm8001_chip_make_sg(task->scatter, 1, |
| 4535 | ccb->buf_prd); |
| 4536 | phys_addr = ccb->ccb_dma_handle + |
| 4537 | offsetof(struct pm8001_ccb_info, |
| 4538 | buf_prd[0]); |
| 4539 | sata_cmd.enc_addr_low = |
| 4540 | lower_32_bits(phys_addr); |
| 4541 | sata_cmd.enc_addr_high = |
| 4542 | upper_32_bits(phys_addr); |
| 4543 | sata_cmd.enc_esgl = |
| 4544 | cpu_to_le32(1 << 31); |
| 4545 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4546 | } else if (task->num_scatter == 0) { |
| 4547 | sata_cmd.enc_addr_low = 0; |
| 4548 | sata_cmd.enc_addr_high = 0; |
| 4549 | sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len); |
| 4550 | sata_cmd.enc_esgl = 0; |
| 4551 | } |
| 4552 | /* XTS mode. All other fields are 0 */ |
| 4553 | sata_cmd.key_index_mode = 0x6 << 4; |
| 4554 | /* set tweak values. Should be the start lba */ |
| 4555 | sata_cmd.twk_val0 = |
| 4556 | cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) | |
| 4557 | (sata_cmd.sata_fis.lbah << 16) | |
| 4558 | (sata_cmd.sata_fis.lbam << 8) | |
| 4559 | (sata_cmd.sata_fis.lbal)); |
| 4560 | sata_cmd.twk_val1 = |
| 4561 | cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) | |
| 4562 | (sata_cmd.sata_fis.lbam_exp)); |
| 4563 | } else { |
| 4564 | PM8001_IO_DBG(pm8001_ha, pm8001_printk( |
| 4565 | "Sending Normal SATA command 0x%x inb %x\n", |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4566 | sata_cmd.sata_fis.command, q_index)); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4567 | /* dad (bit 0-1) is 0 */ |
| 4568 | sata_cmd.ncqtag_atap_dir_m_dad = |
| 4569 | cpu_to_le32(((ncg_tag & 0xff)<<16) | |
| 4570 | ((ATAP & 0x3f) << 10) | dir); |
| 4571 | |
| 4572 | /* fill in PRD (scatter/gather) table, if any */ |
| 4573 | if (task->num_scatter > 1) { |
| 4574 | pm8001_chip_make_sg(task->scatter, |
| 4575 | ccb->n_elem, ccb->buf_prd); |
| 4576 | phys_addr = ccb->ccb_dma_handle + |
| 4577 | offsetof(struct pm8001_ccb_info, buf_prd[0]); |
| 4578 | sata_cmd.addr_low = lower_32_bits(phys_addr); |
| 4579 | sata_cmd.addr_high = upper_32_bits(phys_addr); |
| 4580 | sata_cmd.esgl = cpu_to_le32(1 << 31); |
| 4581 | } else if (task->num_scatter == 1) { |
| 4582 | u64 dma_addr = sg_dma_address(task->scatter); |
| 4583 | sata_cmd.addr_low = lower_32_bits(dma_addr); |
| 4584 | sata_cmd.addr_high = upper_32_bits(dma_addr); |
| 4585 | sata_cmd.len = cpu_to_le32(task->total_xfer_len); |
| 4586 | sata_cmd.esgl = 0; |
Anand Kumar Santhanam | 0ecdf00 | 2013-09-18 11:14:54 +0530 | [diff] [blame] | 4587 | /* Check 4G Boundary */ |
| 4588 | start_addr = cpu_to_le64(dma_addr); |
| 4589 | end_addr = (start_addr + sata_cmd.len) - 1; |
| 4590 | end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); |
| 4591 | end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); |
| 4592 | if (end_addr_high != sata_cmd.addr_high) { |
| 4593 | PM8001_FAIL_DBG(pm8001_ha, |
| 4594 | pm8001_printk("The sg list address " |
| 4595 | "start_addr=0x%016llx data_len=0x%x" |
| 4596 | "end_addr_high=0x%08x end_addr_low=" |
| 4597 | "0x%08x has crossed 4G boundary\n", |
| 4598 | start_addr, sata_cmd.len, |
| 4599 | end_addr_high, end_addr_low)); |
| 4600 | pm8001_chip_make_sg(task->scatter, 1, |
| 4601 | ccb->buf_prd); |
| 4602 | phys_addr = ccb->ccb_dma_handle + |
| 4603 | offsetof(struct pm8001_ccb_info, |
| 4604 | buf_prd[0]); |
| 4605 | sata_cmd.addr_low = |
| 4606 | lower_32_bits(phys_addr); |
| 4607 | sata_cmd.addr_high = |
| 4608 | upper_32_bits(phys_addr); |
| 4609 | sata_cmd.esgl = cpu_to_le32(1 << 31); |
| 4610 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4611 | } else if (task->num_scatter == 0) { |
| 4612 | sata_cmd.addr_low = 0; |
| 4613 | sata_cmd.addr_high = 0; |
| 4614 | sata_cmd.len = cpu_to_le32(task->total_xfer_len); |
| 4615 | sata_cmd.esgl = 0; |
| 4616 | } |
Colin Ian King | 9e2a07e | 2019-03-17 18:15:32 +0000 | [diff] [blame] | 4617 | /* scsi cdb */ |
| 4618 | sata_cmd.atapi_scsi_cdb[0] = |
| 4619 | cpu_to_le32(((task->ata_task.atapi_packet[0]) | |
| 4620 | (task->ata_task.atapi_packet[1] << 8) | |
| 4621 | (task->ata_task.atapi_packet[2] << 16) | |
| 4622 | (task->ata_task.atapi_packet[3] << 24))); |
| 4623 | sata_cmd.atapi_scsi_cdb[1] = |
| 4624 | cpu_to_le32(((task->ata_task.atapi_packet[4]) | |
| 4625 | (task->ata_task.atapi_packet[5] << 8) | |
| 4626 | (task->ata_task.atapi_packet[6] << 16) | |
| 4627 | (task->ata_task.atapi_packet[7] << 24))); |
| 4628 | sata_cmd.atapi_scsi_cdb[2] = |
| 4629 | cpu_to_le32(((task->ata_task.atapi_packet[8]) | |
| 4630 | (task->ata_task.atapi_packet[9] << 8) | |
| 4631 | (task->ata_task.atapi_packet[10] << 16) | |
| 4632 | (task->ata_task.atapi_packet[11] << 24))); |
| 4633 | sata_cmd.atapi_scsi_cdb[3] = |
| 4634 | cpu_to_le32(((task->ata_task.atapi_packet[12]) | |
| 4635 | (task->ata_task.atapi_packet[13] << 8) | |
| 4636 | (task->ata_task.atapi_packet[14] << 16) | |
| 4637 | (task->ata_task.atapi_packet[15] << 24))); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4638 | } |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4639 | |
| 4640 | /* Check for read log for failed drive and return */ |
| 4641 | if (sata_cmd.sata_fis.command == 0x2f) { |
| 4642 | if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) || |
| 4643 | (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) || |
| 4644 | (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) { |
| 4645 | struct task_status_struct *ts; |
| 4646 | |
| 4647 | pm8001_ha_dev->id &= 0xDFFFFFFF; |
| 4648 | ts = &task->task_status; |
| 4649 | |
| 4650 | spin_lock_irqsave(&task->task_state_lock, flags); |
| 4651 | ts->resp = SAS_TASK_COMPLETE; |
| 4652 | ts->stat = SAM_STAT_GOOD; |
| 4653 | task->task_state_flags &= ~SAS_TASK_STATE_PENDING; |
| 4654 | task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; |
| 4655 | task->task_state_flags |= SAS_TASK_STATE_DONE; |
| 4656 | if (unlikely((task->task_state_flags & |
| 4657 | SAS_TASK_STATE_ABORTED))) { |
| 4658 | spin_unlock_irqrestore(&task->task_state_lock, |
| 4659 | flags); |
| 4660 | PM8001_FAIL_DBG(pm8001_ha, |
| 4661 | pm8001_printk("task 0x%p resp 0x%x " |
| 4662 | " stat 0x%x but aborted by upper layer " |
| 4663 | "\n", task, ts->resp, ts->stat)); |
| 4664 | pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); |
| 4665 | return 0; |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 4666 | } else { |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4667 | spin_unlock_irqrestore(&task->task_state_lock, |
| 4668 | flags); |
Suresh Thiagarajan | 2b01d81 | 2014-01-16 15:26:21 +0530 | [diff] [blame] | 4669 | pm8001_ccb_task_free_done(pm8001_ha, task, |
| 4670 | ccb, tag); |
Sakthivel K | c6b9ef5 | 2013-03-19 18:08:08 +0530 | [diff] [blame] | 4671 | return 0; |
| 4672 | } |
| 4673 | } |
| 4674 | } |
Anand Kumar Santhanam | f9cd6cb | 2013-09-18 11:12:59 +0530 | [diff] [blame] | 4675 | q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4676 | ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4677 | &sata_cmd, sizeof(sata_cmd), q_index); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4678 | return ret; |
| 4679 | } |
| 4680 | |
| 4681 | /** |
| 4682 | * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND |
| 4683 | * @pm8001_ha: our hba card information. |
| 4684 | * @num: the inbound queue number |
| 4685 | * @phy_id: the phy id which we wanted to start up. |
| 4686 | */ |
| 4687 | static int |
| 4688 | pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) |
| 4689 | { |
| 4690 | struct phy_start_req payload; |
| 4691 | struct inbound_queue_table *circularQ; |
| 4692 | int ret; |
| 4693 | u32 tag = 0x01; |
| 4694 | u32 opcode = OPC_INB_PHYSTART; |
| 4695 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4696 | memset(&payload, 0, sizeof(payload)); |
| 4697 | payload.tag = cpu_to_le32(tag); |
| 4698 | |
| 4699 | PM8001_INIT_DBG(pm8001_ha, |
| 4700 | pm8001_printk("PHY START REQ for phy_id %d\n", phy_id)); |
Anand Kumar Santhanam | a9a923e | 2013-09-03 15:09:42 +0530 | [diff] [blame] | 4701 | |
peter chang | 3e253d9 | 2019-11-14 15:39:07 +0530 | [diff] [blame] | 4702 | payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | |
| 4703 | LINKMODE_AUTO | pm8001_ha->link_rate | phy_id); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4704 | /* SSC Disable and SAS Analog ST configuration */ |
| 4705 | /** |
| 4706 | payload.ase_sh_lm_slr_phyid = |
| 4707 | cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE | |
| 4708 | LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | |
| 4709 | phy_id); |
| 4710 | Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need |
| 4711 | **/ |
| 4712 | |
James Bottomley | aa9f832 | 2013-05-07 14:44:06 -0700 | [diff] [blame] | 4713 | payload.sas_identify.dev_type = SAS_END_DEVICE; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4714 | payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; |
| 4715 | memcpy(payload.sas_identify.sas_addr, |
peter chang | 3e253d9 | 2019-11-14 15:39:07 +0530 | [diff] [blame] | 4716 | &pm8001_ha->sas_addr, SAS_ADDR_SIZE); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4717 | payload.sas_identify.phy_id = phy_id; |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4718 | ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, |
| 4719 | sizeof(payload), 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4720 | return ret; |
| 4721 | } |
| 4722 | |
| 4723 | /** |
| 4724 | * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND |
| 4725 | * @pm8001_ha: our hba card information. |
| 4726 | * @num: the inbound queue number |
| 4727 | * @phy_id: the phy id which we wanted to start up. |
| 4728 | */ |
| 4729 | static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, |
| 4730 | u8 phy_id) |
| 4731 | { |
| 4732 | struct phy_stop_req payload; |
| 4733 | struct inbound_queue_table *circularQ; |
| 4734 | int ret; |
| 4735 | u32 tag = 0x01; |
| 4736 | u32 opcode = OPC_INB_PHYSTOP; |
| 4737 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4738 | memset(&payload, 0, sizeof(payload)); |
| 4739 | payload.tag = cpu_to_le32(tag); |
| 4740 | payload.phy_id = cpu_to_le32(phy_id); |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4741 | ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, |
| 4742 | sizeof(payload), 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4743 | return ret; |
| 4744 | } |
| 4745 | |
| 4746 | /** |
| 4747 | * see comments on pm8001_mpi_reg_resp. |
| 4748 | */ |
| 4749 | static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, |
| 4750 | struct pm8001_device *pm8001_dev, u32 flag) |
| 4751 | { |
| 4752 | struct reg_dev_req payload; |
| 4753 | u32 opc; |
| 4754 | u32 stp_sspsmp_sata = 0x4; |
| 4755 | struct inbound_queue_table *circularQ; |
| 4756 | u32 linkrate, phy_id; |
| 4757 | int rc, tag = 0xdeadbeef; |
| 4758 | struct pm8001_ccb_info *ccb; |
| 4759 | u8 retryFlag = 0x1; |
| 4760 | u16 firstBurstSize = 0; |
| 4761 | u16 ITNT = 2000; |
| 4762 | struct domain_device *dev = pm8001_dev->sas_device; |
| 4763 | struct domain_device *parent_dev = dev->parent; |
| 4764 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4765 | |
| 4766 | memset(&payload, 0, sizeof(payload)); |
| 4767 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 4768 | if (rc) |
| 4769 | return rc; |
| 4770 | ccb = &pm8001_ha->ccb_info[tag]; |
| 4771 | ccb->device = pm8001_dev; |
| 4772 | ccb->ccb_tag = tag; |
| 4773 | payload.tag = cpu_to_le32(tag); |
| 4774 | |
| 4775 | if (flag == 1) { |
| 4776 | stp_sspsmp_sata = 0x02; /*direct attached sata */ |
| 4777 | } else { |
James Bottomley | aa9f832 | 2013-05-07 14:44:06 -0700 | [diff] [blame] | 4778 | if (pm8001_dev->dev_type == SAS_SATA_DEV) |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4779 | stp_sspsmp_sata = 0x00; /* stp*/ |
James Bottomley | aa9f832 | 2013-05-07 14:44:06 -0700 | [diff] [blame] | 4780 | else if (pm8001_dev->dev_type == SAS_END_DEVICE || |
| 4781 | pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || |
| 4782 | pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4783 | stp_sspsmp_sata = 0x01; /*ssp or smp*/ |
| 4784 | } |
John Garry | 924a354 | 2019-06-10 20:41:41 +0800 | [diff] [blame] | 4785 | if (parent_dev && dev_is_expander(parent_dev->dev_type)) |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4786 | phy_id = parent_dev->ex_dev.ex_phy->phy_id; |
| 4787 | else |
| 4788 | phy_id = pm8001_dev->attached_phy; |
| 4789 | |
| 4790 | opc = OPC_INB_REG_DEV; |
| 4791 | |
| 4792 | linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ? |
| 4793 | pm8001_dev->sas_device->linkrate : dev->port->linkrate; |
| 4794 | |
| 4795 | payload.phyid_portid = |
| 4796 | cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) | |
| 4797 | ((phy_id & 0xFF) << 8)); |
| 4798 | |
| 4799 | payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) | |
| 4800 | ((linkrate & 0x0F) << 24) | |
| 4801 | ((stp_sspsmp_sata & 0x03) << 28)); |
| 4802 | payload.firstburstsize_ITNexustimeout = |
| 4803 | cpu_to_le32(ITNT | (firstBurstSize * 0x10000)); |
| 4804 | |
| 4805 | memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr, |
| 4806 | SAS_ADDR_SIZE); |
| 4807 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4808 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 4809 | sizeof(payload), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 4810 | if (rc) |
| 4811 | pm8001_tag_free(pm8001_ha, tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4812 | |
| 4813 | return rc; |
| 4814 | } |
| 4815 | |
| 4816 | /** |
| 4817 | * pm80xx_chip_phy_ctl_req - support the local phy operation |
| 4818 | * @pm8001_ha: our hba card information. |
| 4819 | * @num: the inbound queue number |
| 4820 | * @phy_id: the phy id which we wanted to operate |
| 4821 | * @phy_op: |
| 4822 | */ |
| 4823 | static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, |
| 4824 | u32 phyId, u32 phy_op) |
| 4825 | { |
Viswas G | 25c6edb | 2017-10-18 11:39:10 +0530 | [diff] [blame] | 4826 | u32 tag; |
| 4827 | int rc; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4828 | struct local_phy_ctl_req payload; |
| 4829 | struct inbound_queue_table *circularQ; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4830 | u32 opc = OPC_INB_LOCAL_PHY_CONTROL; |
| 4831 | memset(&payload, 0, sizeof(payload)); |
Viswas G | 25c6edb | 2017-10-18 11:39:10 +0530 | [diff] [blame] | 4832 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 4833 | if (rc) |
| 4834 | return rc; |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4835 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
Viswas G | 25c6edb | 2017-10-18 11:39:10 +0530 | [diff] [blame] | 4836 | payload.tag = cpu_to_le32(tag); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4837 | payload.phyop_phyid = |
| 4838 | cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF)); |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4839 | return pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 4840 | sizeof(payload), 0); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4841 | } |
| 4842 | |
Colin Ian King | f310a4e | 2019-03-29 23:44:23 +0000 | [diff] [blame] | 4843 | static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha) |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4844 | { |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4845 | #ifdef PM8001_USE_MSIX |
| 4846 | return 1; |
Colin Ian King | 292c04c | 2019-03-28 23:43:28 +0000 | [diff] [blame] | 4847 | #else |
| 4848 | u32 value; |
| 4849 | |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4850 | value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR); |
| 4851 | if (value) |
| 4852 | return 1; |
| 4853 | return 0; |
Colin Ian King | 292c04c | 2019-03-28 23:43:28 +0000 | [diff] [blame] | 4854 | #endif |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4855 | } |
| 4856 | |
| 4857 | /** |
| 4858 | * pm8001_chip_isr - PM8001 isr handler. |
| 4859 | * @pm8001_ha: our hba card information. |
| 4860 | * @irq: irq number. |
| 4861 | * @stat: stat. |
| 4862 | */ |
| 4863 | static irqreturn_t |
| 4864 | pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec) |
| 4865 | { |
| 4866 | pm80xx_chip_interrupt_disable(pm8001_ha, vec); |
peter chang | 7370672 | 2019-11-14 15:39:02 +0530 | [diff] [blame] | 4867 | PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk( |
| 4868 | "irq vec %d, ODMR:0x%x\n", |
| 4869 | vec, pm8001_cr32(pm8001_ha, 0, 0x30))); |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4870 | process_oq(pm8001_ha, vec); |
| 4871 | pm80xx_chip_interrupt_enable(pm8001_ha, vec); |
| 4872 | return IRQ_HANDLED; |
| 4873 | } |
| 4874 | |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 4875 | void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha, |
| 4876 | u32 operation, u32 phyid, u32 length, u32 *buf) |
| 4877 | { |
| 4878 | u32 tag , i, j = 0; |
| 4879 | int rc; |
| 4880 | struct set_phy_profile_req payload; |
| 4881 | struct inbound_queue_table *circularQ; |
| 4882 | u32 opc = OPC_INB_SET_PHY_PROFILE; |
| 4883 | |
| 4884 | memset(&payload, 0, sizeof(payload)); |
| 4885 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 4886 | if (rc) |
| 4887 | PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n")); |
| 4888 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4889 | payload.tag = cpu_to_le32(tag); |
| 4890 | payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid & 0xFF)); |
| 4891 | PM8001_INIT_DBG(pm8001_ha, |
| 4892 | pm8001_printk(" phy profile command for phy %x ,length is %d\n", |
| 4893 | payload.ppc_phyid, length)); |
| 4894 | for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) { |
| 4895 | payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i)); |
| 4896 | j++; |
| 4897 | } |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4898 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 4899 | sizeof(payload), 0); |
Tomas Henzl | 5533abc | 2014-07-09 17:20:49 +0530 | [diff] [blame] | 4900 | if (rc) |
| 4901 | pm8001_tag_free(pm8001_ha, tag); |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 4902 | } |
| 4903 | |
| 4904 | void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha, |
| 4905 | u32 length, u8 *buf) |
| 4906 | { |
YueHaibing | fdd0a66 | 2018-09-14 01:38:56 +0000 | [diff] [blame] | 4907 | u32 i; |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 4908 | |
Anand Kumar Santhanam | 2790940 | 2013-09-18 13:02:44 +0530 | [diff] [blame] | 4909 | for (i = 0; i < pm8001_ha->chip->n_phy; i++) { |
| 4910 | mpi_set_phy_profile_req(pm8001_ha, |
| 4911 | SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf); |
| 4912 | length = length + PHY_DWORD_LENGTH; |
| 4913 | } |
| 4914 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n")); |
| 4915 | } |
Benjamin Rood | c5614df | 2015-10-30 10:53:28 -0400 | [diff] [blame] | 4916 | |
| 4917 | void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha, |
| 4918 | u32 phy, u32 length, u32 *buf) |
| 4919 | { |
| 4920 | u32 tag, opc; |
| 4921 | int rc, i; |
| 4922 | struct set_phy_profile_req payload; |
| 4923 | struct inbound_queue_table *circularQ; |
| 4924 | |
| 4925 | memset(&payload, 0, sizeof(payload)); |
| 4926 | |
| 4927 | rc = pm8001_tag_alloc(pm8001_ha, &tag); |
| 4928 | if (rc) |
| 4929 | PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Invalid tag")); |
| 4930 | |
| 4931 | circularQ = &pm8001_ha->inbnd_q_tbl[0]; |
| 4932 | opc = OPC_INB_SET_PHY_PROFILE; |
| 4933 | |
| 4934 | payload.tag = cpu_to_le32(tag); |
| 4935 | payload.ppc_phyid = (((SAS_PHY_ANALOG_SETTINGS_PAGE & 0xF) << 8) |
| 4936 | | (phy & 0xFF)); |
| 4937 | |
| 4938 | for (i = 0; i < length; i++) |
| 4939 | payload.reserved[i] = cpu_to_le32(*(buf + i)); |
| 4940 | |
peter chang | 91a43fa | 2019-11-14 15:39:05 +0530 | [diff] [blame] | 4941 | rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, |
| 4942 | sizeof(payload), 0); |
Benjamin Rood | c5614df | 2015-10-30 10:53:28 -0400 | [diff] [blame] | 4943 | if (rc) |
| 4944 | pm8001_tag_free(pm8001_ha, tag); |
| 4945 | |
| 4946 | PM8001_INIT_DBG(pm8001_ha, |
| 4947 | pm8001_printk("PHY %d settings applied", phy)); |
| 4948 | } |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4949 | const struct pm8001_dispatch pm8001_80xx_dispatch = { |
| 4950 | .name = "pmc80xx", |
| 4951 | .chip_init = pm80xx_chip_init, |
| 4952 | .chip_soft_rst = pm80xx_chip_soft_rst, |
| 4953 | .chip_rst = pm80xx_hw_chip_rst, |
| 4954 | .chip_iounmap = pm8001_chip_iounmap, |
| 4955 | .isr = pm80xx_chip_isr, |
Colin Ian King | f310a4e | 2019-03-29 23:44:23 +0000 | [diff] [blame] | 4956 | .is_our_interrupt = pm80xx_chip_is_our_interrupt, |
Sakthivel K | f586099 | 2013-04-17 16:37:02 +0530 | [diff] [blame] | 4957 | .isr_process_oq = process_oq, |
| 4958 | .interrupt_enable = pm80xx_chip_interrupt_enable, |
| 4959 | .interrupt_disable = pm80xx_chip_interrupt_disable, |
| 4960 | .make_prd = pm8001_chip_make_sg, |
| 4961 | .smp_req = pm80xx_chip_smp_req, |
| 4962 | .ssp_io_req = pm80xx_chip_ssp_io_req, |
| 4963 | .sata_req = pm80xx_chip_sata_req, |
| 4964 | .phy_start_req = pm80xx_chip_phy_start_req, |
| 4965 | .phy_stop_req = pm80xx_chip_phy_stop_req, |
| 4966 | .reg_dev_req = pm80xx_chip_reg_dev_req, |
| 4967 | .dereg_dev_req = pm8001_chip_dereg_dev_req, |
| 4968 | .phy_ctl_req = pm80xx_chip_phy_ctl_req, |
| 4969 | .task_abort = pm8001_chip_abort_task, |
| 4970 | .ssp_tm_req = pm8001_chip_ssp_tm_req, |
| 4971 | .get_nvmd_req = pm8001_chip_get_nvmd_req, |
| 4972 | .set_nvmd_req = pm8001_chip_set_nvmd_req, |
| 4973 | .fw_flash_update_req = pm8001_chip_fw_flash_update_req, |
| 4974 | .set_dev_state_req = pm8001_chip_set_dev_state_req, |
| 4975 | }; |