Blame - drivers/regulator/Kconfig - SHIFTPHONES/mainline/linux

blob: 4fd13b06231f20c4f1b2ced8d4e0a0966bfbacb0 [file] [log] [blame]

Thomas Gleixner	ec8f24b	2019-05-19 13:07:45 +0100	[diff] [blame]	1	# SPDX-License-Identifier: GPL-2.0-only
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	2	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	bool "Voltage and Current Regulator Support"
Matti Vaittinen	60ab7f4	2020-05-08 18:43:36 +0300	[diff] [blame]	4	select LINEAR_RANGES
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	5	help
				6	Generic Voltage and Current Regulator support.
				7
				8	This framework is designed to provide a generic interface to voltage
				9	and current regulators within the Linux kernel. It's intended to
				10	provide voltage and current control to client or consumer drivers and
				11	also provide status information to user space applications through a
				12	sysfs interface.
				13
				14	The intention is to allow systems to dynamically control regulator
				15	output in order to save power and prolong battery life. This applies
				16	to both voltage regulators (where voltage output is controllable) and
				17	current sinks (where current output is controllable).
				18
				19	This framework safely compiles out if not selected so that client
				20	drivers can still be used in systems with no software controllable
				21	regulators.
				22
				23	If unsure, say no.
				24
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	25
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	26	if REGULATOR
				27
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	config REGULATOR_DEBUG
				29	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	30	help
				31	Say yes here to enable debugging support.
				32
				33	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	34	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	35	help
				36	This driver provides support for fixed voltage regulators,
				37	useful for systems which use a combination of software
				38	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	39
				40	config REGULATOR_VIRTUAL_CONSUMER
				41	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	42	help
				43	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	44	current regulator API which provides sysfs controls for
				45	configuring the supplies requested. This is mainly useful
				46	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	48	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	49
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	50	config REGULATOR_USERSPACE_CONSUMER
				51	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	52	help
				53	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	54	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	55	control power supplies for such devices.
				56
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	57	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	58
Alexander Monakov	a265b03	2018-03-09 01:53:03 +0300	[diff] [blame]	59	config REGULATOR_88PG86X
				60	tristate "Marvell 88PG86X voltage regulators"
				61	depends on I2C
				62	select REGMAP_I2C
				63	help
				64	This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
				65	They provide two I2C-controlled DC/DC step-down converters with
				66	sleep mode and separate enable pins.
				67
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	68	config REGULATOR_88PM800
				69	tristate "Marvell 88PM800 Power regulators"
Axel Lin	7c45f60	2013-07-19 09:17:53 +0800	[diff] [blame]	70	depends on MFD_88PM800
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	71	help
				72	This driver supports Marvell 88PM800 voltage regulator chips.
				73	It delivers digitally programmable output,
				74	the voltage is programmed via I2C interface.
				75	It's suitable to support PXA988 chips to control VCC_MAIN and
				76	various voltages.
				77
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	78	config REGULATOR_88PM8607
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	79	tristate "Marvell 88PM8607 Power regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	80	depends on MFD_88PM860X=y
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	81	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	82	This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	83
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	84	config REGULATOR_ACT8865
				85	tristate "Active-semi act8865 voltage regulator"
				86	depends on I2C
YueHaibing	5375f1e	2019-08-07 21:38:22 +0800	[diff] [blame]	87	depends on POWER_SUPPLY
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	88	select REGMAP_I2C
				89	help
				90	This driver controls a active-semi act8865 voltage output
				91	regulator via I2C bus.
				92
Wenyou Yang	38c0996	2016-02-05 12:33:30 +0800	[diff] [blame]	93	config REGULATOR_ACT8945A
				94	tristate "Active-semi ACT8945A voltage regulator"
				95	depends on MFD_ACT8945A
				96	help
				97	This driver controls a active-semi ACT8945A voltage regulator
				98	via I2C bus. The ACT8945A features three step-down DC/DC converters
				99	and four low-dropout linear regulators, along with a ActivePath
				100	battery charger.
				101
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	102	config REGULATOR_AD5398
				103	tristate "Analog Devices AD5398/AD5821 regulators"
				104	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	105	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	106	This driver supports AD5398 and AD5821 current regulator chips.
				107	If building into module, its name is ad5398.ko.
				108
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	109	config REGULATOR_ANATOP
				110	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Anson Huang	6179b0e	2020-03-02 19:55:18 +0800	[diff] [blame]	111	depends on ARCH_MXC \|\| COMPILE_TEST
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	112	depends on MFD_SYSCON
				113	help
				114	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				115	regulators. It is recommended that this option be
				116	enabled on i.MX6 platform.
				117
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	118	config REGULATOR_AAT2870
				119	tristate "AnalogicTech AAT2870 Regulators"
				120	depends on MFD_AAT2870_CORE
				121	help
				122	If you have a AnalogicTech AAT2870 say Y to enable the
				123	regulator driver.
				124
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	125	config REGULATOR_AB8500
				126	bool "ST-Ericsson AB8500 Power Regulators"
				127	depends on AB8500_CORE
				128	help
				129	This driver supports the regulators found on the ST-Ericsson mixed
				130	signal AB8500 PMIC
				131
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	132	config REGULATOR_ARIZONA_LDO1
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	133	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
				134	depends on MFD_ARIZONA \|\| MFD_MADERA
Mark Brown	e6ed905	2013-01-10 19:14:11 +0000	[diff] [blame]	135	depends on SND_SOC
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	136	help
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	137	Support for the LDO1 regulators found on Cirrus Logic Madera codecs
				138	and Wolfson Microelectronic Arizona codecs.
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	139
				140	config REGULATOR_ARIZONA_MICSUPP
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	141	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
				142	depends on MFD_ARIZONA \|\| MFD_MADERA
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	143	depends on SND_SOC
				144	help
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	145	Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
				146	and Wolfson Microelectronic Arizona codecs
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	147	devices.
				148
Cristian Marussi	0fbeae7	2020-11-23 20:23:36 +0000	[diff] [blame]	149	config REGULATOR_ARM_SCMI
				150	tristate "SCMI based regulator driver"
				151	depends on ARM_SCMI_PROTOCOL && OF
				152	help
				153	This adds the regulator driver support for ARM platforms using SCMI
				154	protocol for device voltage management.
				155	This driver uses SCMI Message Protocol driver to interact with the
				156	firmware providing the device Voltage functionality.
				157
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	158	config REGULATOR_AS3711
				159	tristate "AS3711 PMIC"
				160	depends on MFD_AS3711
				161	help
				162	This driver provides support for the voltage regulators on the
				163	AS3711 PMIC
				164
Laxman Dewangan	bc40733	2013-09-20 18:00:13 +0530	[diff] [blame]	165	config REGULATOR_AS3722
				166	tristate "AMS AS3722 PMIC Regulators"
				167	depends on MFD_AS3722
				168	help
				169	This driver provides support for the voltage regulators on the
				170	AS3722 PMIC. This will enable support for all the software
				171	controllable DCDC/LDO regulators.
				172
Cristian Ciocaltea	3b15cca	2020-12-29 19:31:19 +0200	[diff] [blame]	173	config REGULATOR_ATC260X
				174	tristate "Actions Semi ATC260x PMIC Regulators"
				175	depends on MFD_ATC260X
				176	help
				177	This driver provides support for the voltage regulators on the
				178	ATC260x PMICs. This will enable support for all the software
				179	controllable DCDC/LDO regulators.
				180
Carlo Caione	dfe7a1b	2014-04-11 11:38:10 +0200	[diff] [blame]	181	config REGULATOR_AXP20X
				182	tristate "X-POWERS AXP20X PMIC Regulators"
				183	depends on MFD_AXP20X
				184	help
				185	This driver provides support for the voltage regulators on the
				186	AXP20X PMIC.
				187
Matt Porter	462c9fc	2014-03-11 11:46:13 -0400	[diff] [blame]	188	config REGULATOR_BCM590XX
				189	tristate "Broadcom BCM590xx PMU Regulators"
				190	depends on MFD_BCM590XX
				191	help
				192	This driver provides support for the voltage regulators on the
				193	BCM590xx PMUs. This will enable support for the software
				194	controllable LDO/Switching regulators.
				195
Matti Vaittinen	1aad390	2021-04-05 14:44:16 +0300	[diff] [blame]	196	config REGULATOR_BD71815
				197	tristate "ROHM BD71815 Power Regulator"
				198	depends on MFD_ROHM_BD71828
Randy Dunlap	5ba3747	2021-05-22 17:14:27 -0700	[diff] [blame]	199	select REGULATOR_ROHM
Matti Vaittinen	1aad390	2021-04-05 14:44:16 +0300	[diff] [blame]	200	help
				201	This driver supports voltage regulators on ROHM BD71815 PMIC.
				202	This will enable support for the software controllable buck
				203	and LDO regulators and a current regulator for LEDs.
				204
				205	This driver can also be built as a module. If so, the module
				206	will be called bd71815-regulator.
				207
Matti Vaittinen	522498f	2019-12-11 11:46:11 +0200	[diff] [blame]	208	config REGULATOR_BD71828
				209	tristate "ROHM BD71828 Power Regulator"
				210	depends on MFD_ROHM_BD71828
				211	select REGULATOR_ROHM
				212	help
				213	This driver supports voltage regulators on ROHM BD71828 PMIC.
				214	This will enable support for the software controllable buck
				215	and LDO regulators.
				216
				217	This driver can also be built as a module. If so, the module
				218	will be called bd71828-regulator.
				219
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	220	config REGULATOR_BD718XX
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	221	tristate "ROHM BD71837 Power Regulator"
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	222	depends on MFD_ROHM_BD718XX
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	223	select REGULATOR_ROHM
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	224	help
				225	This driver supports voltage regulators on ROHM BD71837 PMIC.
				226	This will enable support for the software controllable buck
				227	and LDO regulators.
				228
				229	This driver can also be built as a module. If so, the module
Matti Vaittinen	2ece646	2018-09-14 11:34:02 +0300	[diff] [blame]	230	will be called bd718x7-regulator.
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	231
Marek Vasut	e85c5a1	2017-04-24 17:21:30 +0200	[diff] [blame]	232	config REGULATOR_BD9571MWV
				233	tristate "ROHM BD9571MWV Regulators"
				234	depends on MFD_BD9571MWV
				235	help
				236	This driver provides support for the voltage regulators on the
				237	ROHM BD9571MWV PMIC. This will enable support for the software
				238	controllable regulator and voltage sampling units.
				239
				240	This driver can also be built as a module. If so, the module
				241	will be called bd9571mwv-regulator.
				242
Matti Vaittinen	b014e9f	2020-09-17 11:03:31 +0300	[diff] [blame]	243	config REGULATOR_BD957XMUF
				244	tristate "ROHM BD9576MUF and BD9573MUF Regulators"
				245	depends on MFD_ROHM_BD957XMUF
				246	help
				247	This driver supports voltage regulators on ROHM BD9576MUF and
				248	BD9573MUF PMICs.
				249
				250	This driver can also be built as a module. If so, the module
				251	will be called bd9576-regulator.
				252
Tony Lindgren	0ad4c07	2017-02-02 15:43:57 -0800	[diff] [blame]	253	config REGULATOR_CPCAP
				254	tristate "Motorola CPCAP regulator"
				255	depends on MFD_CPCAP
				256	help
				257	Say y here for CPCAP regulator found on some Motorola phones
				258	and tablets such as Droid 4.
				259
Pi-Hsun Shih	8d9f8d5	2020-06-12 12:05:20 +0800	[diff] [blame]	260	config REGULATOR_CROS_EC
				261	tristate "ChromeOS EC regulators"
				262	depends on CROS_EC && OF
				263	help
				264	This driver supports voltage regulators that is connected to ChromeOS
				265	EC and controlled through EC host commands.
				266
				267	This driver can also be built as a module. If so, the module
				268	will be called cros-ec-regulator.
				269
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	270	config REGULATOR_DA903X
				271	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				272	depends on PMIC_DA903X
Arnd Bergmann	0077aaa	2019-03-07 11:26:02 +0100	[diff] [blame]	273	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	274	help
				275	Say y here to support the BUCKs and LDOs regulators found on
				276	Dialog Semiconductor DA9030/DA9034 PMIC.
				277
				278	config REGULATOR_DA9052
				279	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				280	depends on PMIC_DA9052
				281	help
				282	This driver supports the voltage regulators of DA9052-BC and
				283	DA9053-AA/Bx PMIC.
				284
Ashish Jangam	f6130be	2012-11-01 13:57:56 +0530	[diff] [blame]	285	config REGULATOR_DA9055
				286	tristate "Dialog Semiconductor DA9055 regulators"
				287	depends on MFD_DA9055
				288	help
				289	Say y here to support the BUCKs and LDOs regulators found on
				290	Dialog Semiconductor DA9055 PMIC.
				291
				292	This driver can also be built as a module. If so, the module
				293	will be called da9055-regulator.
				294
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	295	config REGULATOR_DA9062
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	296	tristate "Dialog Semiconductor DA9061/62 regulators"
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	297	depends on MFD_DA9062
				298	help
				299	Say y here to support the BUCKs and LDOs regulators found on
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	300	DA9061 and DA9062 PMICs.
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	301
				302	This driver can also be built as a module. If so, the module
				303	will be called da9062-regulator.
				304
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	305	config REGULATOR_DA9063
				306	tristate "Dialog Semiconductor DA9063 regulators"
Wolfram Sang	973af54	2019-05-20 11:34:46 +0200	[diff] [blame]	307	depends on MFD_DA9063 && OF
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	308	help
				309	Say y here to support the BUCKs and LDOs regulators found on
				310	DA9063 PMICs.
				311
				312	This driver can also be built as a module. If so, the module
				313	will be called da9063-regulator.
				314
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	315	config REGULATOR_DA9121
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	316	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	317	depends on I2C && OF
				318	select REGMAP_I2C
				319	help
				320	Say y here to support for the Dialog Semiconductor DA9121. The
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	321	DA9121 is a single channel dual-phase buck converter controlled
				322	through an I2C interface.
				323
				324	DA9121 Single-channel dual-phase 10A buck converter
				325	DA9130 Single-channel dual-phase 10A buck converter (Automotive)
				326	DA9217 Single-channel dual-phase 6A buck converter
				327	DA9122 Dual-channel single-phase 5A buck converter
				328	DA9131 Dual-channel single-phase 5A buck converter (Automotive)
				329	DA9220 Dual-channel single-phase 3A buck converter
				330	DA9132 Dual-channel single-phase 3A buck converter (Automotive)
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	331
				332	This driver can also be built as a module. If so, the module
				333	will be called da9121-regulator.
				334
Steve Twiss	16f1091	2013-08-06 15:30:48 +0100	[diff] [blame]	335	config REGULATOR_DA9210
				336	tristate "Dialog Semiconductor DA9210 regulator"
				337	depends on I2C
				338	select REGMAP_I2C
				339	help
				340	Say y here to support for the Dialog Semiconductor DA9210.
				341	The DA9210 is a multi-phase synchronous step down
				342	converter 12A DC-DC Buck controlled through an I2C
				343	interface.
				344
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	345	config REGULATOR_DA9211
James Ban	707ce9e	2017-10-30 11:32:38 +0900	[diff] [blame]	346	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	347	depends on I2C
				348	select REGMAP_I2C
				349	help
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	350	Say y here to support for the Dialog Semiconductor DA9211/DA9212
James Ban	7bd3935	2015-06-30 13:39:39 +0900	[diff] [blame]	351	/DA9213/DA9214/DA9215.
				352	The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	353	step down converter 12A or 16A DC-DC Buck controlled through an I2C
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	354	interface.
				355
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	356	config REGULATOR_DBX500_PRCMU
				357	bool
				358
				359	config REGULATOR_DB8500_PRCMU
				360	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				361	depends on MFD_DB8500_PRCMU
				362	select REGULATOR_DBX500_PRCMU
				363	help
				364	This driver supports the voltage domain regulators controlled by the
				365	DB8500 PRCMU
				366
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	367	config REGULATOR_FAN53555
				368	tristate "Fairchild FAN53555 Regulator"
				369	depends on I2C
				370	select REGMAP_I2C
				371	help
				372	This driver supports Fairchild FAN53555 Digitally Programmable
				373	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				374	regulator that delivers a digitally programmable output from an
				375	input voltage supply of 2.5V to 5.5V. The output voltage is
				376	programmed through an I2C interface.
				377
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	378	config REGULATOR_FAN53880
				379	tristate "Fairchild FAN53880 Regulator"
Christoph Fritz	318b8a0	2020-07-07 12:57:31 +0200	[diff] [blame]	380	depends on I2C && (OF \|\| COMPILE_TEST)
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	381	select REGMAP_I2C
				382	help
				383	This driver supports Fairchild (ON Semiconductor) FAN53880
				384	regulator. The regulator is a programmable power management IC
				385	(PMIC), it is controlled by I2C and provides one BUCK, one BOOST
				386	and four LDO outputs.
				387
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	388	config REGULATOR_GPIO
				389	tristate "GPIO regulator support"
Geert Uytterhoeven	9eac5fd	2015-05-05 18:32:32 +0200	[diff] [blame]	390	depends on GPIOLIB \|\| COMPILE_TEST
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	391	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	392	This driver provides support for regulators that can be
				393	controlled via gpios.
				394	It is capable of supporting current and voltage regulators
				395	and the platform has to provide a mapping of GPIO-states
				396	to target volts/amps.
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	397
Guodong Xu	87ca186	2014-08-13 19:33:42 +0800	[diff] [blame]	398	config REGULATOR_HI6421
				399	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
				400	depends on MFD_HI6421_PMIC && OF
				401	help
				402	This driver provides support for the voltage regulators on the
				403	HiSilicon Hi6421 PMU / Codec IC.
				404	Hi6421 is a multi-function device which, on regulator part, provides
				405	21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
				406	of them come with support to either ECO (idle) or sleep mode.
				407
Wang Xiaoyin	5c7024a	2017-06-07 15:06:03 +0800	[diff] [blame]	408	config REGULATOR_HI6421V530
				409	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
				410	depends on MFD_HI6421_PMIC && OF
				411	help
				412	This driver provides support for the voltage regulators on
				413	HiSilicon Hi6421v530 PMU / Codec IC.
				414	Hi6421v530 is a multi-function device which, on regulator part,
				415	provides 5 general purpose LDOs, and all of them come with support
				416	to either ECO (idle) or sleep mode.
				417
Chen Feng	4618119	2016-02-14 14:29:22 +0800	[diff] [blame]	418	config REGULATOR_HI655X
				419	tristate "Hisilicon HI655X PMIC regulators support"
				420	depends on ARCH_HISI \|\| COMPILE_TEST
				421	depends on MFD_HI655X_PMIC && OF
				422	help
				423	This driver provides support for the voltage regulators of the
				424	Hisilicon Hi655x PMIC device.
				425
Mauro Carvalho Chehab	507614b	2021-03-25 19:05:37 +0100	[diff] [blame]	426	config REGULATOR_HI6421V600
				427	tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
				428	depends on MFD_HI6421_SPMI && OF
				429	select REGMAP
				430	help
				431	This driver provides support for the voltage regulators on
				432	HiSilicon Hi6421v600 PMU / Codec IC.
				433	This is used on Kirin 3670 boards, like HiKey 970.
				434
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	435	config REGULATOR_ISL9305
				436	tristate "Intersil ISL9305 regulator"
				437	depends on I2C
Axel Lin	ba441ec	2014-09-10 08:44:36 +0800	[diff] [blame]	438	select REGMAP_I2C
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	439	help
				440	This driver supports ISL9305 voltage regulator chip.
				441
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	442	config REGULATOR_ISL6271A
				443	tristate "Intersil ISL6271A Power regulator"
				444	depends on I2C
				445	help
				446	This driver supports ISL6271A voltage regulator chip.
				447
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	448	config REGULATOR_LM363X
				449	tristate "TI LM363X voltage regulators"
				450	depends on MFD_TI_LMU
				451	help
Dan Murphy	bff5e80	2019-06-05 07:56:32 -0500	[diff] [blame]	452	This driver supports LM3631, LM3632 and LM36274 voltage regulators for
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	453	the LCD bias.
				454	One boost output voltage is configurable and always on.
				455	Other LDOs are used for the display module.
				456
Charles Keepax	bef9391	2018-10-08 14:25:41 +0100	[diff] [blame]	457	config REGULATOR_LOCHNAGAR
				458	tristate "Cirrus Logic Lochnagar regulator driver"
				459	depends on MFD_LOCHNAGAR
				460	help
				461	This enables regulator support on the Cirrus Logic Lochnagar audio
				462	development board.
				463
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	464	config REGULATOR_LP3971
				465	tristate "National Semiconductors LP3971 PMIC regulator driver"
				466	depends on I2C
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	467	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	468	Say Y here to support the voltage regulators and convertors
				469	on National Semiconductors LP3971 PMIC
				470
				471	config REGULATOR_LP3972
				472	tristate "National Semiconductors LP3972 PMIC regulator driver"
				473	depends on I2C
				474	help
				475	Say Y here to support the voltage regulators and convertors
				476	on National Semiconductors LP3972 PMIC
				477
				478	config REGULATOR_LP872X
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	479	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin	613965f	2013-08-30 22:13:44 +0800	[diff] [blame]	480	depends on I2C
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	481	select REGMAP_I2C
				482	help
				483	This driver supports LP8720/LP8725 PMIC
				484
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	485	config REGULATOR_LP873X
				486	tristate "TI LP873X Power regulators"
Keerthy	f618ed2	2016-08-31 14:28:12 +0530	[diff] [blame]	487	depends on MFD_TI_LP873X && OF
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	488	help
				489	This driver supports LP873X voltage regulator chips. LP873X
				490	provides two step-down converters and two general-purpose LDO
				491	voltage regulators. It supports software based voltage control
				492	for different voltage domains
				493
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	494	config REGULATOR_LP8755
				495	tristate "TI LP8755 High Performance PMU driver"
				496	depends on I2C
				497	select REGMAP_I2C
				498	help
				499	This driver supports LP8755 High Performance PMU driver. This
				500	chip contains six step-down DC/DC converters which can support
				501	9 mode multiphase configuration.
				502
Keerthy	f0168a9	2017-05-23 17:46:55 +0530	[diff] [blame]	503	config REGULATOR_LP87565
				504	tristate "TI LP87565 Power regulators"
				505	depends on MFD_TI_LP87565 && OF
				506	help
				507	This driver supports LP87565 voltage regulator chips. LP87565
				508	provides four step-down converters. It supports software based
				509	voltage control for different voltage domains
				510
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	511	config REGULATOR_LP8788
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	512	tristate "TI LP8788 Power Regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	513	depends on MFD_LP8788
				514	help
				515	This driver supports LP8788 voltage regulator chip.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	516
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	517	config REGULATOR_LTC3589
Axel Lin	ac1d686	2014-05-27 13:51:49 +0800	[diff] [blame]	518	tristate "LTC3589 8-output voltage regulator"
				519	depends on I2C
				520	select REGMAP_I2C
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	521	help
				522	This enables support for the LTC3589, LTC3589-1, and LTC3589-2
				523	8-output regulators controlled via I2C.
				524
Tim Harvey	37b918a	2016-08-15 12:40:23 -0700	[diff] [blame]	525	config REGULATOR_LTC3676
				526	tristate "LTC3676 8-output voltage regulator"
				527	depends on I2C
				528	select REGMAP_I2C
				529	help
				530	This enables support for the LTC3676
				531	8-output regulators controlled via I2C.
				532
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	533	config REGULATOR_MAX14577
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	534	tristate "Maxim 14577/77836 regulator"
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	535	depends on MFD_MAX14577
				536	help
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	537	This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
				538	The MAX14577 regulators include safeout LDO and charger current
				539	regulator. The MAX77836 has two additional LDOs.
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	540
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	541	config REGULATOR_MAX1586
				542	tristate "Maxim 1586/1587 voltage regulator"
				543	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	544	help
				545	This driver controls a Maxim 1586 or 1587 voltage output
				546	regulator via I2C bus. The provided regulator is suitable
				547	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				548
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	549	config REGULATOR_MAX77620
				550	tristate "Maxim 77620/MAX20024 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	551	depends on MFD_MAX77620 \|\| COMPILE_TEST
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	552	help
				553	This driver controls Maxim MAX77620 voltage output regulator
				554	via I2C bus. The provided regulator is suitable for Tegra
				555	chip to control Step-Down DC-DC and LDOs. Say Y here to
				556	enable the regulator driver.
				557
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	558	config REGULATOR_MAX77650
				559	tristate "Maxim MAX77650/77651 regulator support"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	560	depends on MFD_MAX77650 \|\| COMPILE_TEST
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	561	help
				562	Regulator driver for MAX77650/77651 PMIC from Maxim
				563	Semiconductor. This device has a SIMO with three independent
				564	power rails and an LDO.
				565
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	566	config REGULATOR_MAX8649
				567	tristate "Maxim 8649 voltage regulator"
				568	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	569	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	570	help
				571	This driver controls a Maxim 8649 voltage output regulator via
				572	I2C bus.
				573
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	574	config REGULATOR_MAX8660
				575	tristate "Maxim 8660/8661 voltage regulator"
				576	depends on I2C
				577	help
				578	This driver controls a Maxim 8660/8661 voltage output
				579	regulator via I2C bus.
				580
Sergey Larin	d83f778	2021-06-18 17:16:06 +0300	[diff] [blame]	581	config REGULATOR_MAX8893
				582	tristate "Maxim 8893 voltage regulator"
				583	depends on I2C
Axel Lin	1aeb1a7	2021-06-22 22:15:26 +0800	[diff] [blame]	584	select REGMAP_I2C
Sergey Larin	d83f778	2021-06-18 17:16:06 +0300	[diff] [blame]	585	help
				586	This driver controls a Maxim 8893 voltage output
				587	regulator via I2C bus.
				588
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	589	config REGULATOR_MAX8907
				590	tristate "Maxim 8907 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	591	depends on MFD_MAX8907 \|\| COMPILE_TEST
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	592	help
				593	This driver controls a Maxim 8907 voltage output regulator
				594	via I2C bus. The provided regulator is suitable for Tegra
				595	chip to control Step-Down DC-DC and LDOs.
				596
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	597	config REGULATOR_MAX8925
				598	tristate "Maxim MAX8925 Power Management IC"
				599	depends on MFD_MAX8925
				600	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	601	Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	602
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	603	config REGULATOR_MAX8952
				604	tristate "Maxim MAX8952 Power Management IC"
				605	depends on I2C
				606	help
				607	This driver controls a Maxim 8952 voltage output regulator
				608	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				609	modes ranging from 0.77V to 1.40V by 0.01V steps.
				610
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	611	config REGULATOR_MAX8973
				612	tristate "Maxim MAX8973 voltage regulator "
				613	depends on I2C
Laxman Dewangan	d2d5437b	2016-04-13 15:29:45 +0530	[diff] [blame]	614	depends on THERMAL && THERMAL_OF
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	615	select REGMAP_I2C
				616	help
				617	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	618	switching regulator delivers up to 9A of output current. Each
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	619	phase operates at a 2MHz fixed frequency with a 120 deg shift
				620	from the adjacent phase, allowing the use of small magnetic component.
				621
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	622	config REGULATOR_MAX8997
				623	tristate "Maxim 8997/8966 regulator"
				624	depends on MFD_MAX8997
				625	help
				626	This driver controls a Maxim 8997/8966 regulator
				627	via I2C bus. The provided regulator is suitable for S5PC110,
				628	S5PV210, and Exynos-4 chips to control VCC_CORE and
				629	VCC_USIM voltages.
				630
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	631	config REGULATOR_MAX8998
				632	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	633	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	634	help
				635	This driver controls a Maxim 8998 voltage output regulator
				636	via I2C bus. The provided regulator is suitable for S3C6410
				637	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				638
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	639	config REGULATOR_MAX77686
				640	tristate "Maxim 77686 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	641	depends on MFD_MAX77686 \|\| COMPILE_TEST
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	642	help
				643	This driver controls a Maxim 77686 regulator
				644	via I2C bus. The provided regulator is suitable for
				645	Exynos-4 chips to control VARM and VINT voltages.
				646
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	647	config REGULATOR_MAX77693
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	648	tristate "Maxim 77693/77843 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	649	depends on MFD_MAX77693 \|\| MFD_MAX77843 \|\| COMPILE_TEST
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	650	help
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	651	This driver controls a Maxim 77693/77843 regulators via I2C bus.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	652	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
				653	and one current regulator 'CHARGER'. This is suitable for
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	654	Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	655
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	656	config REGULATOR_MAX77802
				657	tristate "Maxim 77802 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	658	depends on MFD_MAX77686 \|\| COMPILE_TEST
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	659	help
				660	This driver controls a Maxim 77802 regulator
				661	via I2C bus. The provided regulator is suitable for
				662	Exynos5420/Exynos5800 SoCs to control various voltages.
				663	It includes support for control of voltage and ramp speed.
				664
Iskren Chernev	e731465	2020-04-14 20:22:48 +0300	[diff] [blame]	665	config REGULATOR_MAX77826
				666	tristate "Maxim 77826 regulator"
				667	depends on I2C
				668	select REGMAP_I2C
				669	help
				670	This driver controls a Maxim 77826 regulator via I2C bus.
				671	The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
				672	It includes support for control of output voltage. This
				673	regulator is found on the Samsung Galaxy S5 (klte) smartphone.
				674
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	675	config REGULATOR_MC13XXX_CORE
				676	tristate
				677
				678	config REGULATOR_MC13783
				679	tristate "Freescale MC13783 regulator driver"
Alexander Shiyan	e5a3da2	2013-12-14 17:03:10 +0400	[diff] [blame]	680	depends on MFD_MC13XXX
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	681	select REGULATOR_MC13XXX_CORE
				682	help
				683	Say y here to support the regulators found on the Freescale MC13783
				684	PMIC.
				685
				686	config REGULATOR_MC13892
				687	tristate "Freescale MC13892 regulator driver"
				688	depends on MFD_MC13XXX
				689	select REGULATOR_MC13XXX_CORE
				690	help
				691	Say y here to support the regulators found on the Freescale MC13892
				692	PMIC.
				693
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	694	config REGULATOR_MCP16502
				695	tristate "Microchip MCP16502 PMIC"
				696	depends on I2C && OF
Axel Lin	77ea906	2018-12-21 10:49:29 +0800	[diff] [blame]	697	select REGMAP_I2C
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	698	help
				699	Say y here to support the MCP16502 PMIC. This driver supports
				700	basic operations (get/set voltage, get/set operating mode)
				701	through the regulator interface. In addition it enables
				702	suspend-to-ram/standby transition.
				703
Saravanan Sekar	a273188	2020-02-04 12:04:18 +0100	[diff] [blame]	704	config REGULATOR_MP5416
				705	tristate "Monolithic MP5416 PMIC"
				706	depends on I2C && OF
				707	select REGMAP_I2C
				708	help
				709	Say y here to support the MP5416 PMIC. This will enable supports
				710	the software controllable 4 buck and 4 LDO regulators.
				711	Say M here if you want to include support for the regulator as a
				712	module.
				713
Markus Reichl	c66f1cb	2020-01-06 22:16:25 +0100	[diff] [blame]	714	config REGULATOR_MP8859
				715	tristate "MPS MP8859 regulator driver"
				716	depends on I2C
				717	select REGMAP_I2C
				718	help
				719	Say y here to support the MP8859 voltage regulator. This driver
				720	supports basic operations (get/set voltage) through the regulator
				721	interface.
				722	Say M here if you want to include support for the regulator as a
				723	module. The module will be named "mp8859".
				724
Jisheng Zhang	97be8288	2020-03-16 22:30:20 +0800	[diff] [blame]	725	config REGULATOR_MP886X
				726	tristate "MPS MP8869 regulator driver"
				727	depends on I2C && (OF \|\| COMPILE_TEST)
				728	select REGMAP_I2C
				729	help
				730	This driver supports the MP8869 voltage regulator.
				731
Saravanan Sekar	6501c1f	2020-01-09 20:53:46 +0100	[diff] [blame]	732	config REGULATOR_MPQ7920
				733	tristate "Monolithic MPQ7920 PMIC"
				734	depends on I2C && OF
				735	select REGMAP_I2C
				736	help
				737	Say y here to support the MPQ7920 PMIC. This will enable supports
				738	the software controllable 4 buck and 5 LDO regulators.
				739	This driver supports the control of different power rails of device
				740	through regulator interface.
				741
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	742	config REGULATOR_MT6311
				743	tristate "MediaTek MT6311 PMIC"
				744	depends on I2C
Henry Chen	aab3c3f	2015-11-17 16:36:49 +0800	[diff] [blame]	745	select REGMAP_I2C
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	746	help
				747	Say y here to select this option to enable the power regulator of
				748	MediaTek MT6311 PMIC.
				749	This driver supports the control of different power rails of device
				750	through regulator interface.
				751
Hsin-Hsiung Wang	7aa382c	2021-02-07 14:14:16 +0800	[diff] [blame]	752	config REGULATOR_MT6315
				753	tristate "MediaTek MT6315 PMIC"
				754	depends on SPMI
				755	select REGMAP_SPMI
				756	help
				757	Say y here to select this option to enable the power regulator of
				758	MediaTek MT6315 PMIC.
				759	This driver supports the control of different power rails of device
				760	through regulator interface.
				761
Chen Zhong	2fdf829	2016-07-18 14:40:51 +0200	[diff] [blame]	762	config REGULATOR_MT6323
				763	tristate "MediaTek MT6323 PMIC"
				764	depends on MFD_MT6397
				765	help
				766	Say y here to select this option to enable the power regulator of
				767	MediaTek MT6323 PMIC.
				768	This driver supports the control of different power rails of device
				769	through regulator interface.
				770
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	771	config REGULATOR_MT6358
				772	tristate "MediaTek MT6358 PMIC"
Axel Lin	1b3bcca	2020-06-16 21:50:30 +0800	[diff] [blame]	773	depends on MFD_MT6397
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	774	help
				775	Say y here to select this option to enable the power regulator of
				776	MediaTek MT6358 PMIC.
				777	This driver supports the control of different power rails of device
				778	through regulator interface.
				779
Wen Su	d7a58de	2021-05-26 14:52:05 +0800	[diff] [blame]	780	config REGULATOR_MT6359
				781	tristate "MediaTek MT6359 PMIC"
				782	depends on MFD_MT6397
				783	help
				784	Say y here to select this option to enable the power regulator of
				785	MediaTek MT6359 PMIC.
				786	This driver supports the control of different power rails of device
				787	through regulator interface.
				788
Gene Chen	d321571	2020-08-26 18:49:17 +0800	[diff] [blame]	789	config REGULATOR_MT6360
				790	tristate "MT6360 SubPMIC Regulator"
				791	depends on MFD_MT6360
				792	help
				793	Say Y here to enable MT6360 regulator support.
				794	This is support MT6360 PMIC/LDO part include
				795	2-channel buck with Thermal Shutdown and Overload Protection
				796	6-channel High PSRR and Low Dropout LDO.
				797
Chenglin Xu	a551e27	2017-08-15 17:09:15 +0800	[diff] [blame]	798	config REGULATOR_MT6380
				799	tristate "MediaTek MT6380 PMIC"
				800	depends on MTK_PMIC_WRAP
				801	help
				802	Say y here to select this option to enable the power regulator of
				803	MediaTek MT6380 PMIC.
				804	This driver supports the control of different power rails of device
				805	through regulator interface.
				806
Flora Fu	0425e24	2014-12-05 12:07:54 +0800	[diff] [blame]	807	config REGULATOR_MT6397
				808	tristate "MediaTek MT6397 PMIC"
				809	depends on MFD_MT6397
				810	help
				811	Say y here to select this option to enable the power regulator of
				812	MediaTek MT6397 PMIC.
				813	This driver supports the control of different power rails of device
				814	through regulator interface.
				815
henryc.chen	a0db6b0	2020-12-24 14:08:52 +0800	[diff] [blame]	816	config REGULATOR_MTK_DVFSRC
				817	tristate "MediaTek DVFSRC regulator driver"
				818	depends on MTK_DVFSRC
				819	help
				820	Say y here to control regulator by DVFSRC (dynamic voltage
				821	and frequency scaling resource collector).
				822	This driver supports to control regulators via the DVFSRC
				823	of Mediatek. It allows for voting on regulator state
				824	between multiple users.
				825
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	826	config REGULATOR_PALMAS
				827	tristate "TI Palmas PMIC Regulators"
				828	depends on MFD_PALMAS
				829	help
				830	If you wish to control the regulators on the Palmas series of
				831	chips say Y here. This will enable support for all the software
				832	controllable SMPS/LDO regulators.
				833
				834	The regulators available on Palmas series chips vary depending
				835	on the muxing. This is handled automatically in the driver by
				836	reading the mux info from OTP.
				837
Balaji T K	11469e0	2014-02-19 20:26:40 +0530	[diff] [blame]	838	config REGULATOR_PBIAS
				839	tristate "PBIAS OMAP regulator driver"
				840	depends on (ARCH_OMAP \|\| COMPILE_TEST) && MFD_SYSCON
				841	help
				842	Say y here to support pbias regulator for mmc1:SD card i/o
				843	on OMAP SoCs.
				844	This driver provides support for OMAP pbias modelled
				845	regulators.
				846
Robin Gong	0935ff5f	2020-07-04 00:19:35 +0800	[diff] [blame]	847	config REGULATOR_PCA9450
				848	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
				849	depends on I2C
				850	select REGMAP_I2C
				851	help
				852	Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
				853	regulator driver.
				854
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	855	config REGULATOR_PCAP
				856	tristate "Motorola PCAP2 regulator driver"
				857	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	858	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	859	This driver provides support for the voltage regulators of the
				860	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	861
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	862	config REGULATOR_PCF50633
				863	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	864	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	865	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	866	Say Y here to support the voltage regulators and converters
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	867	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	868
Jagan Teki	d3795d6	2020-11-30 16:53:29 +0530	[diff] [blame]	869	config REGULATOR_PF8X00
				870	tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
				871	depends on I2C && OF
				872	select REGMAP_I2C
				873	help
				874	Say y here to support the regulators found on the NXP
				875	PF8100/PF8121A/PF8200 PMIC.
				876
Adrien Grassein	4d23b84	2021-01-14 18:47:09 +0100	[diff] [blame]	877	Say M here if you want to support for the regulators found
				878	on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
				879	"pf8x00-regulator".
				880
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	881	config REGULATOR_PFUZE100
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	882	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
Fabio Estevam	6a6939d	2020-12-10 18:27:48 -0300	[diff] [blame]	883	depends on I2C && OF
Axel Lin	94421b0	2013-07-29 12:08:01 +0800	[diff] [blame]	884	select REGMAP_I2C
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	885	help
Axel Lin	2cee212	2014-03-05 18:02:43 +0800	[diff] [blame]	886	Say y here to support the regulators found on the Freescale
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	887	PFUZE100/200/3000/3001 PMIC.
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	888
James Ban	f307a7e	2015-11-19 09:59:15 +0900	[diff] [blame]	889	config REGULATOR_PV88060
				890	tristate "Powerventure Semiconductor PV88060 regulator"
				891	depends on I2C
				892	select REGMAP_I2C
				893	help
				894	Say y here to support the voltage regulators and convertors
				895	PV88060
				896
James Ban	99cf3af	2016-04-15 13:34:22 +0900	[diff] [blame]	897	config REGULATOR_PV88080
				898	tristate "Powerventure Semiconductor PV88080 regulator"
				899	depends on I2C
				900	select REGMAP_I2C
				901	help
				902	Say y here to support the buck convertors on PV88080
				903
James Ban	c90456e	2015-12-08 10:57:29 +0900	[diff] [blame]	904	config REGULATOR_PV88090
				905	tristate "Powerventure Semiconductor PV88090 regulator"
				906	depends on I2C
				907	select REGMAP_I2C
				908	help
				909	Say y here to support the voltage regulators and convertors
				910	on PV88090
				911
Chris Zhong	aa66cc6	2014-09-28 10:28:53 +0800	[diff] [blame]	912	config REGULATOR_PWM
				913	tristate "PWM voltage regulator"
				914	depends on PWM
				915	help
				916	This driver supports PWM controlled voltage regulators. PWM
				917	duty cycle can increase or decrease the voltage.
				918
Bjorn Andersson	2720386	2014-09-22 16:25:29 -0700	[diff] [blame]	919	config REGULATOR_QCOM_RPM
				920	tristate "Qualcomm RPM regulator driver"
				921	depends on MFD_QCOM_RPM
				922	help
				923	If you say yes to this option, support will be included for the
				924	regulators exposed by the Resource Power Manager found in Qualcomm
				925	8660, 8960 and 8064 based devices.
				926
				927	Say M here if you want to include support for the regulators on the
				928	Qualcomm RPM as a module. The module will be named
				929	"qcom_rpm-regulator".
				930
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	931	config REGULATOR_QCOM_RPMH
				932	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
John Stultz	34c5aa2	2020-11-23 22:23:59 +0000	[diff] [blame]	933	depends on QCOM_RPMH \|\| (QCOM_RPMH=n && COMPILE_TEST)
Arnd Bergmann	d957d16	2020-12-30 15:56:23 +0100	[diff] [blame]	934	depends on QCOM_COMMAND_DB \|\| (QCOM_COMMAND_DB=n && COMPILE_TEST)
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	935	help
				936	This driver supports control of PMIC regulators via the RPMh hardware
				937	block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
				938	control allows for voting on regulator state between multiple
				939	processors within the SoC.
				940
Bjorn Andersson	da65e36	2015-08-17 11:43:59 -0700	[diff] [blame]	941	config REGULATOR_QCOM_SMD_RPM
				942	tristate "Qualcomm SMD based RPM regulator driver"
				943	depends on QCOM_SMD_RPM
				944	help
				945	If you say yes to this option, support will be included for the
				946	regulators exposed by the Resource Power Manager found in Qualcomm
				947	8974 based devices.
				948
				949	Say M here if you want to include support for the regulators on the
				950	Qualcomm RPM as a module. The module will be named
				951	"qcom_smd-regulator".
				952
Stephen Boyd	e92a404	2015-06-12 15:47:10 -0700	[diff] [blame]	953	config REGULATOR_QCOM_SPMI
				954	tristate "Qualcomm SPMI regulator driver"
				955	depends on SPMI \|\| COMPILE_TEST
				956	help
				957	If you say yes to this option, support will be included for the
				958	regulators found in Qualcomm SPMI PMICs.
				959
				960	Say M here if you want to include support for the regulators on the
				961	Qualcomm SPMI PMICs as a module. The module will be named
				962	"qcom_spmi-regulator".
				963
Wesley Cheng	4fe66d5	2020-06-26 11:55:14 -0700	[diff] [blame]	964	config REGULATOR_QCOM_USB_VBUS
				965	tristate "Qualcomm USB Vbus regulator driver"
				966	depends on SPMI \|\| COMPILE_TEST
				967	help
				968	If you say yes to this option, support will be included for the
				969	regulator used to enable the VBUS output.
				970
				971	Say M here if you want to include support for enabling the VBUS output
				972	as a module. The module will be named "qcom_usb_vbus_regulator".
				973
Marek Vasut	3857347	2020-08-09 12:59:38 +0200	[diff] [blame]	974	config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
				975	tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
				976	depends on BACKLIGHT_CLASS_DEVICE
				977	depends on I2C
				978	select REGMAP_I2C
				979	help
				980	This driver supports ATTINY regulator on the Raspberry Pi 7-inch
				981	touchscreen unit. The regulator is used to enable power to the
				982	TC358762, display and to control backlight.
				983
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	984	config REGULATOR_RC5T583
				985	tristate "RICOH RC5T583 Power regulators"
				986	depends on MFD_RC5T583
				987	help
				988	Select this option to enable the power regulator of RICOH
				989	PMIC RC5T583.
				990	This driver supports the control of different power rails of device
				991	through regulator interface. The device supports multiple DCDC/LDO
				992	outputs which can be controlled by i2c communication.
				993
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	994	config REGULATOR_RK808
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	995	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	996	depends on MFD_RK808
				997	help
				998	Select this option to enable the power regulator of ROCKCHIP
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	999	PMIC RK805,RK809&RK817,RK808 and RK818.
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	1000	This driver supports the control of different power rails of device
				1001	through regulator interface. The device supports multiple DCDC/LDO
				1002	outputs which can be controlled by i2c communication.
				1003
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	1004	config REGULATOR_RN5T618
Stefan Agner	ed6d362	2016-06-28 22:53:20 -0700	[diff] [blame]	1005	tristate "Ricoh RN5T567/618 voltage regulators"
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	1006	depends on MFD_RN5T618
				1007	help
Pierre-Hugues Husson	83b2a3c	2017-08-27 15:58:31 +0200	[diff] [blame]	1008	Say y here to support the regulators found on Ricoh RN5T567,
				1009	RN5T618 or RC5T619 PMIC.
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	1010
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	1011	config REGULATOR_ROHM
				1012	tristate
				1013
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	1014	config REGULATOR_RT4801
				1015	tristate "Richtek RT4801 Regulators"
				1016	depends on I2C
Axel Lin	02532cb	2020-08-19 16:59:59 +0800	[diff] [blame]	1017	select REGMAP_I2C
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	1018	help
				1019	This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
				1020	The device supports two regulators (DSVP/DSVN).
				1021
ChiYuan Huang	9351ab8	2020-12-17 23:00:44 +0800	[diff] [blame]	1022	config REGULATOR_RT4831
				1023	tristate "Richtek RT4831 DSV Regulators"
				1024	depends on MFD_RT4831
				1025	help
				1026	This adds support for voltage regulators in Richtek RT4831.
				1027	There are three regulators (VLCM/DSVP/DSVN).
				1028	VLCM is a virtual voltage input for DSVP/DSVN inside IC.
				1029	And DSVP/DSVN is the real Vout range from 4V to 6.5V.
				1030	It's common used to provide the power for the display panel.
				1031
Beomho Seo	b191757	2014-11-12 21:07:59 +0900	[diff] [blame]	1032	config REGULATOR_RT5033
				1033	tristate "Richtek RT5033 Regulators"
				1034	depends on MFD_RT5033
				1035	help
				1036	This adds support for voltage and current regulators in Richtek
				1037	RT5033 PMIC. The device supports multiple regulators like
				1038	current source, LDO and Buck.
				1039
ChiYuan Huang	de20b74	2021-06-02 13:31:46 +0800	[diff] [blame]	1040	config REGULATOR_RT6160
				1041	tristate "Richtek RT6160 BuckBoost voltage regulator"
				1042	depends on I2C
				1043	select REGMAP_I2C
				1044	help
				1045	This adds support for voltage regulator in Richtek RT6160.
				1046	This device automatically change voltage output mode from
Colin Ian King	f020e4d	2021-07-19 11:34:29 +0100	[diff] [blame]	1047	Buck or Boost. The mode transition depend on the input source voltage.
ChiYuan Huang	de20b74	2021-06-02 13:31:46 +0800	[diff] [blame]	1048	The wide output range is from 2025mV to 5200mV and can be used on most
				1049	common application scenario.
				1050
ChiYuan Huang	a747070	2021-06-03 13:57:24 +0800	[diff] [blame]	1051	config REGULATOR_RT6245
				1052	tristate "Richtek RT6245 voltage regulator"
				1053	depends on I2C
				1054	select REGMAP_I2C
				1055	help
Colin Ian King	f020e4d	2021-07-19 11:34:29 +0100	[diff] [blame]	1056	This adds support for Richtek RT6245 voltage regulator.
ChiYuan Huang	a747070	2021-06-03 13:57:24 +0800	[diff] [blame]	1057	It can support up to 14A output current and adjustable output voltage
				1058	from 0.4375V to 1.3875V, per step 12.5mV.
				1059
ChiYuan Huang	0555d41	2021-07-16 16:03:56 +0800	[diff] [blame]	1060	config REGULATOR_RTQ2134
				1061	tristate "Richtek RTQ2134 SubPMIC Regulator"
				1062	depends on I2C
				1063	select REGMAP_I2C
				1064	help
				1065	This driver adds support for RTQ2134 SubPMIC regulators.
				1066	The RTQ2134 is a multi-phase, programmable power management IC that
				1067	integrate with four high efficient, synchronous step-down converter
				1068	cores. It features wide output voltage range and the capability to
				1069	configure the corresponding power stages.
				1070
ChiYuan Huang	b8c054a	2020-09-28 15:19:43 +0800	[diff] [blame]	1071	config REGULATOR_RTMV20
Axel Lin	5f01de6	2021-05-30 20:41:01 +0800	[diff] [blame]	1072	tristate "Richtek RTMV20 Laser Diode Regulator"
ChiYuan Huang	b8c054a	2020-09-28 15:19:43 +0800	[diff] [blame]	1073	depends on I2C
				1074	select REGMAP_I2C
				1075	help
				1076	This driver adds support for the load switch current regulator on
				1077	the Richtek RTMV20. It can support the load current up to 6A and
				1078	integrate strobe/vsync/fsin signal to synchronize the IR camera.
				1079
ChiYuan Huang	f40f940	2021-07-09 23:40:36 +0800	[diff] [blame]	1080	config REGULATOR_RTQ6752
				1081	tristate "Richtek RTQ6752 TFT LCD voltage regulator"
				1082	depends on I2C
				1083	select REGMAP_I2C
				1084	help
				1085	This driver adds support for Richtek RTQ6752. RTQ6752 includes two
				1086	synchronous boost converters for PAVDD, and one synchronous NAVDD
				1087	buck-boost. This device is suitable for automotive TFT-LCD panel.
				1088
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1089	config REGULATOR_S2MPA01
				1090	tristate "Samsung S2MPA01 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1091	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1092	help
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1093	This driver controls Samsung S2MPA01 voltage output regulator
				1094	via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
				1095
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1096	config REGULATOR_S2MPS11
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1097	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1098	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1099	help
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1100	This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
Chanwoo Choi	76b9840	2014-11-18 17:59:40 +0900	[diff] [blame]	1101	output regulator via I2C bus. The chip is comprised of high efficient
				1102	Buck converters including Dual-Phase Buck converter, Buck-Boost
				1103	converter, various LDOs.
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1104
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1105	config REGULATOR_S5M8767
				1106	tristate "Samsung S5M8767A voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1107	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1108	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1109	This driver supports a Samsung S5M8767A voltage output regulator
				1110	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				1111	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	1112
Erick Chen	433c9bb	2017-12-05 14:35:46 +0800	[diff] [blame]	1113	config REGULATOR_SC2731
				1114	tristate "Spreadtrum SC2731 power regulator driver"
				1115	depends on MFD_SC27XX_PMIC \|\| COMPILE_TEST
				1116	help
				1117	This driver provides support for the voltage regulators on the
				1118	SC2731 PMIC.
				1119
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1120	config REGULATOR_SKY81452
				1121	tristate "Skyworks Solutions SKY81452 voltage regulator"
Gyungoh Yoo	70b5b27	2014-11-17 17:33:10 +0900	[diff] [blame]	1122	depends on MFD_SKY81452
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1123	help
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1124	This driver supports Skyworks SKY81452 voltage output regulator
				1125	via I2C bus. SKY81452 has one voltage linear regulator can be
				1126	programmed from 4.5V to 20V.
				1127
				1128	This driver can also be built as a module. If so, the module
				1129	will be called sky81452-regulator.
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1130
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1131	config REGULATOR_SLG51000
Krzysztof Kozlowski	76bec25	2019-11-20 21:39:49 +0800	[diff] [blame]	1132	tristate "Dialog Semiconductor SLG51000 regulators"
				1133	depends on I2C
				1134	select REGMAP_I2C
				1135	help
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1136	Say y here to support for the Dialog Semiconductor SLG51000.
				1137	The SLG51000 is seven compact and customizable low dropout
				1138	regulators.
				1139
Fabrice Gasnier	4e210fb	2019-07-01 10:14:23 +0200	[diff] [blame]	1140	config REGULATOR_STM32_BOOSTER
				1141	tristate "STMicroelectronics STM32 BOOSTER"
				1142	depends on ARCH_STM32 \|\| COMPILE_TEST
				1143	help
				1144	This driver supports internal booster (3V3) embedded in some
				1145	STMicroelectronics STM32 chips. It can be used to supply ADC analog
				1146	input switches when vdda supply is below 2.7V.
				1147
				1148	This driver can also be built as a module. If so, the module
				1149	will be called stm32-booster.
				1150
Fabrice Gasnier	0cdbf48	2017-08-30 17:55:28 +0200	[diff] [blame]	1151	config REGULATOR_STM32_VREFBUF
				1152	tristate "STMicroelectronics STM32 VREFBUF"
				1153	depends on ARCH_STM32 \|\| COMPILE_TEST
				1154	help
				1155	This driver supports STMicroelectronics STM32 VREFBUF (voltage
				1156	reference buffer) which can be used as voltage reference for
				1157	internal ADCs, DACs and also for external components through
				1158	dedicated Vref+ pin.
				1159
				1160	This driver can also be built as a module. If so, the module
				1161	will be called stm32-vrefbuf.
				1162
Pascal PAILLET-LME	6cdae81	2019-04-15 09:17:38 +0000	[diff] [blame]	1163	config REGULATOR_STM32_PWR
				1164	bool "STMicroelectronics STM32 PWR"
				1165	depends on ARCH_STM32 \|\| COMPILE_TEST
				1166	help
				1167	This driver supports internal regulators (1V1, 1V8, 3V3) in the
				1168	STMicroelectronics STM32 chips.
				1169
pascal paillet	ca55b71	2018-10-08 16:29:40 +0000	[diff] [blame]	1170	config REGULATOR_STPMIC1
				1171	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
				1172	depends on MFD_STPMIC1
				1173	help
				1174	This driver supports STMicroelectronics STPMIC1 PMIC voltage
				1175	regulators and switches. The STPMIC1 regulators supply power to
				1176	an application processor as well as to external system
				1177	peripherals such as DDR, Flash memories and system devices.
				1178
				1179	To compile this driver as a module, choose M here: the
				1180	module will be called stpmic1_regulator.
				1181
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1182	config REGULATOR_TI_ABB
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1183	tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1184	depends on ARCH_OMAP
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	1185	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1186	Select this option to support Texas Instruments' on-chip Adaptive Body
				1187	Bias (ABB) LDO regulators. It is recommended that this option be
				1188	enabled on required TI SoC. Certain Operating Performance Points
				1189	on TI SoCs may be unstable without enabling this as it provides
				1190	device specific optimized bias to allow/optimize functionality.
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	1191
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1192	config REGULATOR_STW481X_VMMC
				1193	bool "ST Microelectronics STW481X VMMC regulator"
Luis de Bethencourt	4049dc1	2015-10-12 17:27:08 +0100	[diff] [blame]	1194	depends on MFD_STW481X \|\| COMPILE_TEST
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1195	default y if MFD_STW481X
				1196	help
				1197	This driver supports the internal VMMC regulator in the STw481x
				1198	PMIC chips.
				1199
Alistair Francis	8c485be	2021-06-15 20:33:58 +1000	[diff] [blame]	1200	config REGULATOR_SY7636A
				1201	tristate "Silergy SY7636A voltage regulator"
				1202	depends on MFD_SY7636A
				1203	help
				1204	This driver supports Silergy SY3686A voltage regulator.
				1205
Ondrej Jirman	8878302	2018-05-07 20:29:41 +0800	[diff] [blame]	1206	config REGULATOR_SY8106A
				1207	tristate "Silergy SY8106A regulator"
				1208	depends on I2C && (OF \|\| COMPILE_TEST)
				1209	select REGMAP_I2C
				1210	help
				1211	This driver supports SY8106A single output regulator.
				1212
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1213	config REGULATOR_SY8824X
Jisheng Zhang	67a7b05	2019-08-27 08:47:30 +0000	[diff] [blame]	1214	tristate "Silergy SY8824C/SY8824E regulator"
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1215	depends on I2C && (OF \|\| COMPILE_TEST)
				1216	select REGMAP_I2C
				1217	help
				1218	This driver supports SY8824C single output regulator.
				1219
Jisheng Zhang	38fc6f2	2020-07-02 17:14:38 +0800	[diff] [blame]	1220	config REGULATOR_SY8827N
				1221	tristate "Silergy SY8827N regulator"
				1222	depends on I2C && (OF \|\| COMPILE_TEST)
				1223	select REGMAP_I2C
				1224	help
				1225	This driver supports SY8827N single output regulator.
				1226
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1227	config REGULATOR_TPS51632
				1228	tristate "TI TPS51632 Power Regulator"
				1229	depends on I2C
				1230	select REGMAP_I2C
				1231	help
				1232	This driver supports TPS51632 voltage regulator chip.
Axel Lin	7bde767	2012-11-01 14:02:36 +0800	[diff] [blame]	1233	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1234	with Serial VID control and DVFS.
				1235	The voltage output can be configure through I2C interface or PWM
				1236	interface.
				1237
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	1238	config REGULATOR_TPS6105X
				1239	tristate "TI TPS6105X Power regulators"
				1240	depends on TPS6105X
				1241	default y if TPS6105X
				1242	help
				1243	This driver supports TPS61050/TPS61052 voltage regulator chips.
				1244	It is a single boost converter primarily for white LEDs and
				1245	audio amplifiers.
				1246
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1247	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1248	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1249	depends on I2C
				1250	select REGMAP_I2C
				1251	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1252	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1253	regulator is meant for processor core supply. This chip is
				1254	high-frequency synchronous step down dc-dc converter optimized
				1255	for battery-powered portable applications.
				1256
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1257	config REGULATOR_TPS65023
				1258	tristate "TI TPS65023 Power regulators"
				1259	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	1260	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1261	help
				1262	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				1263	three step-down converters and two general-purpose LDO voltage regulators.
				1264	It supports TI's software based Class-2 SmartReflex implementation.
				1265
				1266	config REGULATOR_TPS6507X
				1267	tristate "TI TPS6507X Power regulators"
				1268	depends on I2C
				1269	help
				1270	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				1271	three step-down converters and two general-purpose LDO voltage regulators.
				1272	It supports TI's software based Class-2 SmartReflex implementation.
				1273
Andrew F. Davis	d2a2e72	2015-11-04 11:12:14 -0600	[diff] [blame]	1274	config REGULATOR_TPS65086
				1275	tristate "TI TPS65086 Power regulators"
				1276	depends on MFD_TPS65086
				1277	help
				1278	This driver provides support for the voltage regulators on
				1279	TI TPS65086 PMICs.
				1280
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	1281	config REGULATOR_TPS65090
				1282	tristate "TI TPS65090 Power regulator"
				1283	depends on MFD_TPS65090
				1284	help
				1285	This driver provides support for the voltage regulators on the
				1286	TI TPS65090 PMIC.
				1287
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1288	config REGULATOR_TPS65132
				1289	tristate "TI TPS65132 Dual Output Power regulators"
				1290	depends on I2C && GPIOLIB
				1291	select REGMAP_I2C
				1292	help
				1293	This driver supports TPS65132 single inductor - dual output
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	1294	power supply specifically designed for display panels.
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1295
AnilKumar Ch	a493077f	2012-01-11 16:11:49 +0530	[diff] [blame]	1296	config REGULATOR_TPS65217
				1297	tristate "TI TPS65217 Power regulators"
				1298	depends on MFD_TPS65217
				1299	help
				1300	This driver supports TPS65217 voltage regulator chips. TPS65217
				1301	provides three step-down converters and four general-purpose LDO
				1302	voltage regulators. It supports software based voltage control
				1303	for different voltage domains
				1304
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1305	config REGULATOR_TPS65218
				1306	tristate "TI TPS65218 Power regulators"
Axel Lin	948838a	2014-02-19 16:35:03 +0800	[diff] [blame]	1307	depends on MFD_TPS65218 && OF
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1308	help
				1309	This driver supports TPS65218 voltage regulator chips. TPS65218
				1310	provides six step-down converters and one general-purpose LDO
				1311	voltage regulators. It supports software based voltage control
				1312	for different voltage domains
				1313
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	1314	config REGULATOR_TPS6524X
				1315	tristate "TI TPS6524X Power regulators"
				1316	depends on SPI
				1317	help
				1318	This driver supports TPS6524X voltage regulator chips. TPS6524X
				1319	provides three step-down converters and two general-purpose LDO
				1320	voltage regulators. This device is interfaced using a customized
				1321	serial interface currently supported on the sequencer serial
				1322	port controller.
				1323
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1324	config REGULATOR_TPS6586X
				1325	tristate "TI TPS6586X Power regulators"
				1326	depends on MFD_TPS6586X
				1327	help
				1328	This driver supports TPS6586X voltage regulator chips.
				1329
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1330	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1331	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1332	depends on MFD_TPS65910
				1333	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1334	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1335
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1336	config REGULATOR_TPS65912
				1337	tristate "TI TPS65912 Power regulator"
Andrew F. Davis	33f9d8c	2016-01-25 09:43:46 -0600	[diff] [blame]	1338	depends on MFD_TPS65912
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1339	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1340	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1341
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1342	config REGULATOR_TPS80031
Sebastiaan Schalbroeck	3b06349	2016-08-22 18:23:14 +0200	[diff] [blame]	1343	tristate "TI TPS80031/TPS80032 power regulator driver"
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1344	depends on MFD_TPS80031
				1345	help
				1346	TPS80031/ TPS80032 Fully Integrated Power Management with Power
				1347	Path and Battery Charger. It has 5 configurable step-down
				1348	converters, 11 general purpose LDOs, VBUS generator and digital
				1349	output to control regulators.
				1350
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1351	config REGULATOR_TWL4030
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1352	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1353	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1354	help
				1355	This driver supports the voltage regulators provided by
				1356	this family of companion chips.
				1357
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1358	config REGULATOR_UNIPHIER
				1359	tristate "UniPhier regulator driver"
				1360	depends on ARCH_UNIPHIER \|\| COMPILE_TEST
Axel Lin	a71bcdf	2019-03-25 18:59:19 +0800	[diff] [blame]	1361	depends on OF
				1362	select REGMAP_MMIO
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1363	default ARCH_UNIPHIER
				1364	help
				1365	Support for regulators implemented on Socionext UniPhier SoCs.
				1366
Matthias Kaehlcke	9dee7a7	2017-04-07 12:51:58 -0700	[diff] [blame]	1367	config REGULATOR_VCTRL
				1368	tristate "Voltage controlled regulators"
				1369	depends on OF
				1370	help
				1371	This driver provides support for voltage regulators whose output
				1372	voltage is controlled by the voltage of another regulator.
				1373
Pawel Moll	31e5408	2012-09-24 18:56:54 +0100	[diff] [blame]	1374	config REGULATOR_VEXPRESS
				1375	tristate "Versatile Express regulators"
				1376	depends on VEXPRESS_CONFIG
				1377	help
				1378	This driver provides support for voltage regulators available
				1379	on the ARM Ltd's Versatile Express platform.
				1380
Robert Marko	ebf652b	2020-01-12 12:30:01 +0100	[diff] [blame]	1381	config REGULATOR_VQMMC_IPQ4019
				1382	tristate "IPQ4019 VQMMC SD LDO regulator support"
				1383	depends on ARCH_QCOM
				1384	help
				1385	This driver provides support for the VQMMC LDO I/0
				1386	voltage regulator of the IPQ4019 SD/EMMC controller.
				1387
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1388	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1389	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1390	depends on MFD_WM831X
				1391	help
				1392	Support the voltage and current regulators of the WM831x series
				1393	of PMIC devices.
				1394
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1395	config REGULATOR_WM8350
				1396	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				1397	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1398	help
				1399	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	1400	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1401
				1402	config REGULATOR_WM8400
				1403	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				1404	depends on MFD_WM8400
				1405	help
				1406	This driver provides support for the voltage regulators of the
				1407	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1408
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1409	config REGULATOR_WM8994
				1410	tristate "Wolfson Microelectronics WM8994 CODEC"
				1411	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1412	help
				1413	This driver provides support for the voltage regulators on the
				1414	WM8994 CODEC.
				1415
Nisha Kumari	498ab2f	2020-06-22 18:11:10 +0530	[diff] [blame]	1416	config REGULATOR_QCOM_LABIBB
				1417	tristate "QCOM LAB/IBB regulator support"
				1418	depends on SPMI \|\| COMPILE_TEST
				1419	help
				1420	This driver supports Qualcomm's LAB/IBB regulators present on the
				1421	Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
				1422	based PMIC implementations. LAB can be used as positive
				1423	boost regulator and IBB can be used as a negative boost regulator
				1424	for LCD display panel.
				1425
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1426	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1427