Blame - drivers/regulator/Kconfig - SHIFTPHONES/mainline/linux

blob: 6120c5cf6ccc0f3422837f6124fdfb924d2b5f6b [file] [log] [blame]

Thomas Gleixner	ec8f24b	2019-05-19 13:07:45 +0100	[diff] [blame]	1	# SPDX-License-Identifier: GPL-2.0-only
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	2	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	bool "Voltage and Current Regulator Support"
Matti Vaittinen	60ab7f4	2020-05-08 18:43:36 +0300	[diff] [blame]	4	select LINEAR_RANGES
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	5	help
				6	Generic Voltage and Current Regulator support.
				7
				8	This framework is designed to provide a generic interface to voltage
				9	and current regulators within the Linux kernel. It's intended to
				10	provide voltage and current control to client or consumer drivers and
				11	also provide status information to user space applications through a
				12	sysfs interface.
				13
				14	The intention is to allow systems to dynamically control regulator
				15	output in order to save power and prolong battery life. This applies
				16	to both voltage regulators (where voltage output is controllable) and
				17	current sinks (where current output is controllable).
				18
				19	This framework safely compiles out if not selected so that client
				20	drivers can still be used in systems with no software controllable
				21	regulators.
				22
				23	If unsure, say no.
				24
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	25
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	26	if REGULATOR
				27
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	config REGULATOR_DEBUG
				29	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	30	help
				31	Say yes here to enable debugging support.
				32
				33	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	34	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	35	help
				36	This driver provides support for fixed voltage regulators,
				37	useful for systems which use a combination of software
				38	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	39
				40	config REGULATOR_VIRTUAL_CONSUMER
				41	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	42	help
				43	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	44	current regulator API which provides sysfs controls for
				45	configuring the supplies requested. This is mainly useful
				46	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	48	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	49
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	50	config REGULATOR_USERSPACE_CONSUMER
				51	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	52	help
				53	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	54	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	55	control power supplies for such devices.
				56
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	57	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	58
Alexander Monakov	a265b03	2018-03-09 01:53:03 +0300	[diff] [blame]	59	config REGULATOR_88PG86X
				60	tristate "Marvell 88PG86X voltage regulators"
				61	depends on I2C
				62	select REGMAP_I2C
				63	help
				64	This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
				65	They provide two I2C-controlled DC/DC step-down converters with
				66	sleep mode and separate enable pins.
				67
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	68	config REGULATOR_88PM800
				69	tristate "Marvell 88PM800 Power regulators"
Axel Lin	7c45f60	2013-07-19 09:17:53 +0800	[diff] [blame]	70	depends on MFD_88PM800
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	71	help
				72	This driver supports Marvell 88PM800 voltage regulator chips.
				73	It delivers digitally programmable output,
				74	the voltage is programmed via I2C interface.
				75	It's suitable to support PXA988 chips to control VCC_MAIN and
				76	various voltages.
				77
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	78	config REGULATOR_88PM8607
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	79	tristate "Marvell 88PM8607 Power regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	80	depends on MFD_88PM860X=y
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	81	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	82	This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	83
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	84	config REGULATOR_ACT8865
				85	tristate "Active-semi act8865 voltage regulator"
				86	depends on I2C
YueHaibing	5375f1e	2019-08-07 21:38:22 +0800	[diff] [blame]	87	depends on POWER_SUPPLY
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	88	select REGMAP_I2C
				89	help
				90	This driver controls a active-semi act8865 voltage output
				91	regulator via I2C bus.
				92
Wenyou Yang	38c0996	2016-02-05 12:33:30 +0800	[diff] [blame]	93	config REGULATOR_ACT8945A
				94	tristate "Active-semi ACT8945A voltage regulator"
				95	depends on MFD_ACT8945A
				96	help
				97	This driver controls a active-semi ACT8945A voltage regulator
				98	via I2C bus. The ACT8945A features three step-down DC/DC converters
				99	and four low-dropout linear regulators, along with a ActivePath
				100	battery charger.
				101
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	102	config REGULATOR_AD5398
				103	tristate "Analog Devices AD5398/AD5821 regulators"
				104	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	105	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	106	This driver supports AD5398 and AD5821 current regulator chips.
				107	If building into module, its name is ad5398.ko.
				108
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	109	config REGULATOR_ANATOP
				110	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Anson Huang	6179b0e	2020-03-02 19:55:18 +0800	[diff] [blame]	111	depends on ARCH_MXC \|\| COMPILE_TEST
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	112	depends on MFD_SYSCON
				113	help
				114	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				115	regulators. It is recommended that this option be
				116	enabled on i.MX6 platform.
				117
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	118	config REGULATOR_AAT2870
				119	tristate "AnalogicTech AAT2870 Regulators"
				120	depends on MFD_AAT2870_CORE
				121	help
				122	If you have a AnalogicTech AAT2870 say Y to enable the
				123	regulator driver.
				124
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	125	config REGULATOR_AB8500
				126	bool "ST-Ericsson AB8500 Power Regulators"
				127	depends on AB8500_CORE
				128	help
				129	This driver supports the regulators found on the ST-Ericsson mixed
				130	signal AB8500 PMIC
				131
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	132	config REGULATOR_ARIZONA_LDO1
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	133	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
				134	depends on MFD_ARIZONA \|\| MFD_MADERA
Mark Brown	e6ed905	2013-01-10 19:14:11 +0000	[diff] [blame]	135	depends on SND_SOC
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	136	help
Richard Fitzgerald	1f5f11e	2019-05-21 11:04:38 +0100	[diff] [blame]	137	Support for the LDO1 regulators found on Cirrus Logic Madera codecs
				138	and Wolfson Microelectronic Arizona codecs.
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	139
				140	config REGULATOR_ARIZONA_MICSUPP
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	141	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
				142	depends on MFD_ARIZONA \|\| MFD_MADERA
Richard Fitzgerald	7e64259	2017-04-18 11:43:48 +0100	[diff] [blame]	143	depends on SND_SOC
				144	help
Richard Fitzgerald	7bd7916	2019-05-21 11:04:39 +0100	[diff] [blame]	145	Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
				146	and Wolfson Microelectronic Arizona codecs
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	147	devices.
				148
Cristian Marussi	0fbeae7	2020-11-23 20:23:36 +0000	[diff] [blame]	149	config REGULATOR_ARM_SCMI
				150	tristate "SCMI based regulator driver"
				151	depends on ARM_SCMI_PROTOCOL && OF
				152	help
				153	This adds the regulator driver support for ARM platforms using SCMI
				154	protocol for device voltage management.
				155	This driver uses SCMI Message Protocol driver to interact with the
				156	firmware providing the device Voltage functionality.
				157
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	158	config REGULATOR_AS3711
				159	tristate "AS3711 PMIC"
				160	depends on MFD_AS3711
				161	help
				162	This driver provides support for the voltage regulators on the
				163	AS3711 PMIC
				164
Laxman Dewangan	bc40733	2013-09-20 18:00:13 +0530	[diff] [blame]	165	config REGULATOR_AS3722
				166	tristate "AMS AS3722 PMIC Regulators"
				167	depends on MFD_AS3722
				168	help
				169	This driver provides support for the voltage regulators on the
				170	AS3722 PMIC. This will enable support for all the software
				171	controllable DCDC/LDO regulators.
				172
Cristian Ciocaltea	3b15cca	2020-12-29 19:31:19 +0200	[diff] [blame]	173	config REGULATOR_ATC260X
				174	tristate "Actions Semi ATC260x PMIC Regulators"
				175	depends on MFD_ATC260X
				176	help
				177	This driver provides support for the voltage regulators on the
				178	ATC260x PMICs. This will enable support for all the software
				179	controllable DCDC/LDO regulators.
				180
Carlo Caione	dfe7a1b	2014-04-11 11:38:10 +0200	[diff] [blame]	181	config REGULATOR_AXP20X
				182	tristate "X-POWERS AXP20X PMIC Regulators"
				183	depends on MFD_AXP20X
				184	help
				185	This driver provides support for the voltage regulators on the
				186	AXP20X PMIC.
				187
Matt Porter	462c9fc	2014-03-11 11:46:13 -0400	[diff] [blame]	188	config REGULATOR_BCM590XX
				189	tristate "Broadcom BCM590xx PMU Regulators"
				190	depends on MFD_BCM590XX
				191	help
				192	This driver provides support for the voltage regulators on the
				193	BCM590xx PMUs. This will enable support for the software
				194	controllable LDO/Switching regulators.
				195
Matti Vaittinen	99ea37b	2019-01-22 11:46:08 +0200	[diff] [blame]	196	config REGULATOR_BD70528
				197	tristate "ROHM BD70528 Power Regulator"
				198	depends on MFD_ROHM_BD70528
				199	help
				200	This driver supports voltage regulators on ROHM BD70528 PMIC.
				201	This will enable support for the software controllable buck
				202	and LDO regulators.
				203
				204	This driver can also be built as a module. If so, the module
				205	will be called bd70528-regulator.
				206
Matti Vaittinen	522498f	2019-12-11 11:46:11 +0200	[diff] [blame]	207	config REGULATOR_BD71828
				208	tristate "ROHM BD71828 Power Regulator"
				209	depends on MFD_ROHM_BD71828
				210	select REGULATOR_ROHM
				211	help
				212	This driver supports voltage regulators on ROHM BD71828 PMIC.
				213	This will enable support for the software controllable buck
				214	and LDO regulators.
				215
				216	This driver can also be built as a module. If so, the module
				217	will be called bd71828-regulator.
				218
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	219	config REGULATOR_BD718XX
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	220	tristate "ROHM BD71837 Power Regulator"
Matti Vaittinen	410e8b4	2018-07-30 14:50:08 +0300	[diff] [blame]	221	depends on MFD_ROHM_BD718XX
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	222	select REGULATOR_ROHM
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	223	help
				224	This driver supports voltage regulators on ROHM BD71837 PMIC.
				225	This will enable support for the software controllable buck
				226	and LDO regulators.
				227
				228	This driver can also be built as a module. If so, the module
Matti Vaittinen	2ece646	2018-09-14 11:34:02 +0300	[diff] [blame]	229	will be called bd718x7-regulator.
Matti Vaittinen	ba08799	2018-05-30 11:43:43 +0300	[diff] [blame]	230
Marek Vasut	e85c5a1	2017-04-24 17:21:30 +0200	[diff] [blame]	231	config REGULATOR_BD9571MWV
				232	tristate "ROHM BD9571MWV Regulators"
				233	depends on MFD_BD9571MWV
				234	help
				235	This driver provides support for the voltage regulators on the
				236	ROHM BD9571MWV PMIC. This will enable support for the software
				237	controllable regulator and voltage sampling units.
				238
				239	This driver can also be built as a module. If so, the module
				240	will be called bd9571mwv-regulator.
				241
Matti Vaittinen	b014e9f	2020-09-17 11:03:31 +0300	[diff] [blame]	242	config REGULATOR_BD957XMUF
				243	tristate "ROHM BD9576MUF and BD9573MUF Regulators"
				244	depends on MFD_ROHM_BD957XMUF
				245	help
				246	This driver supports voltage regulators on ROHM BD9576MUF and
				247	BD9573MUF PMICs.
				248
				249	This driver can also be built as a module. If so, the module
				250	will be called bd9576-regulator.
				251
Tony Lindgren	0ad4c07	2017-02-02 15:43:57 -0800	[diff] [blame]	252	config REGULATOR_CPCAP
				253	tristate "Motorola CPCAP regulator"
				254	depends on MFD_CPCAP
				255	help
				256	Say y here for CPCAP regulator found on some Motorola phones
				257	and tablets such as Droid 4.
				258
Pi-Hsun Shih	8d9f8d5	2020-06-12 12:05:20 +0800	[diff] [blame]	259	config REGULATOR_CROS_EC
				260	tristate "ChromeOS EC regulators"
				261	depends on CROS_EC && OF
				262	help
				263	This driver supports voltage regulators that is connected to ChromeOS
				264	EC and controlled through EC host commands.
				265
				266	This driver can also be built as a module. If so, the module
				267	will be called cros-ec-regulator.
				268
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	269	config REGULATOR_DA903X
				270	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				271	depends on PMIC_DA903X
Arnd Bergmann	0077aaa	2019-03-07 11:26:02 +0100	[diff] [blame]	272	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	273	help
				274	Say y here to support the BUCKs and LDOs regulators found on
				275	Dialog Semiconductor DA9030/DA9034 PMIC.
				276
				277	config REGULATOR_DA9052
				278	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				279	depends on PMIC_DA9052
				280	help
				281	This driver supports the voltage regulators of DA9052-BC and
				282	DA9053-AA/Bx PMIC.
				283
Ashish Jangam	f6130be	2012-11-01 13:57:56 +0530	[diff] [blame]	284	config REGULATOR_DA9055
				285	tristate "Dialog Semiconductor DA9055 regulators"
				286	depends on MFD_DA9055
				287	help
				288	Say y here to support the BUCKs and LDOs regulators found on
				289	Dialog Semiconductor DA9055 PMIC.
				290
				291	This driver can also be built as a module. If so, the module
				292	will be called da9055-regulator.
				293
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	294	config REGULATOR_DA9062
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	295	tristate "Dialog Semiconductor DA9061/62 regulators"
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	296	depends on MFD_DA9062
				297	help
				298	Say y here to support the BUCKs and LDOs regulators found on
Steve Twiss	4b7f495	2017-06-07 09:13:48 +0100	[diff] [blame]	299	DA9061 and DA9062 PMICs.
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	300
				301	This driver can also be built as a module. If so, the module
				302	will be called da9062-regulator.
				303
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	304	config REGULATOR_DA9063
				305	tristate "Dialog Semiconductor DA9063 regulators"
Wolfram Sang	973af54	2019-05-20 11:34:46 +0200	[diff] [blame]	306	depends on MFD_DA9063 && OF
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	307	help
				308	Say y here to support the BUCKs and LDOs regulators found on
				309	DA9063 PMICs.
				310
				311	This driver can also be built as a module. If so, the module
				312	will be called da9063-regulator.
				313
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	314	config REGULATOR_DA9121
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	315	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	316	depends on I2C && OF
				317	select REGMAP_I2C
				318	help
				319	Say y here to support for the Dialog Semiconductor DA9121. The
Adam Ward	c860476	2020-11-30 16:59:08 +0000	[diff] [blame]	320	DA9121 is a single channel dual-phase buck converter controlled
				321	through an I2C interface.
				322
				323	DA9121 Single-channel dual-phase 10A buck converter
				324	DA9130 Single-channel dual-phase 10A buck converter (Automotive)
				325	DA9217 Single-channel dual-phase 6A buck converter
				326	DA9122 Dual-channel single-phase 5A buck converter
				327	DA9131 Dual-channel single-phase 5A buck converter (Automotive)
				328	DA9220 Dual-channel single-phase 3A buck converter
				329	DA9132 Dual-channel single-phase 3A buck converter (Automotive)
Vincent Whitchurch	e6ff10f	2020-11-03 11:00:21 +0100	[diff] [blame]	330
				331	This driver can also be built as a module. If so, the module
				332	will be called da9121-regulator.
				333
Steve Twiss	16f1091	2013-08-06 15:30:48 +0100	[diff] [blame]	334	config REGULATOR_DA9210
				335	tristate "Dialog Semiconductor DA9210 regulator"
				336	depends on I2C
				337	select REGMAP_I2C
				338	help
				339	Say y here to support for the Dialog Semiconductor DA9210.
				340	The DA9210 is a multi-phase synchronous step down
				341	converter 12A DC-DC Buck controlled through an I2C
				342	interface.
				343
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	344	config REGULATOR_DA9211
James Ban	707ce9e	2017-10-30 11:32:38 +0900	[diff] [blame]	345	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	346	depends on I2C
				347	select REGMAP_I2C
				348	help
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	349	Say y here to support for the Dialog Semiconductor DA9211/DA9212
James Ban	7bd3935	2015-06-30 13:39:39 +0900	[diff] [blame]	350	/DA9213/DA9214/DA9215.
				351	The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	352	step down converter 12A or 16A DC-DC Buck controlled through an I2C
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	353	interface.
				354
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	355	config REGULATOR_DBX500_PRCMU
				356	bool
				357
				358	config REGULATOR_DB8500_PRCMU
				359	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				360	depends on MFD_DB8500_PRCMU
				361	select REGULATOR_DBX500_PRCMU
				362	help
				363	This driver supports the voltage domain regulators controlled by the
				364	DB8500 PRCMU
				365
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	366	config REGULATOR_FAN53555
				367	tristate "Fairchild FAN53555 Regulator"
				368	depends on I2C
				369	select REGMAP_I2C
				370	help
				371	This driver supports Fairchild FAN53555 Digitally Programmable
				372	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				373	regulator that delivers a digitally programmable output from an
				374	input voltage supply of 2.5V to 5.5V. The output voltage is
				375	programmed through an I2C interface.
				376
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	377	config REGULATOR_FAN53880
				378	tristate "Fairchild FAN53880 Regulator"
Christoph Fritz	318b8a0	2020-07-07 12:57:31 +0200	[diff] [blame]	379	depends on I2C && (OF \|\| COMPILE_TEST)
Christoph Fritz	e6dea51	2020-07-02 23:08:45 +0200	[diff] [blame]	380	select REGMAP_I2C
				381	help
				382	This driver supports Fairchild (ON Semiconductor) FAN53880
				383	regulator. The regulator is a programmable power management IC
				384	(PMIC), it is controlled by I2C and provides one BUCK, one BOOST
				385	and four LDO outputs.
				386
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	387	config REGULATOR_GPIO
				388	tristate "GPIO regulator support"
Geert Uytterhoeven	9eac5fd	2015-05-05 18:32:32 +0200	[diff] [blame]	389	depends on GPIOLIB \|\| COMPILE_TEST
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	390	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	391	This driver provides support for regulators that can be
				392	controlled via gpios.
				393	It is capable of supporting current and voltage regulators
				394	and the platform has to provide a mapping of GPIO-states
				395	to target volts/amps.
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	396
Guodong Xu	87ca186	2014-08-13 19:33:42 +0800	[diff] [blame]	397	config REGULATOR_HI6421
				398	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
				399	depends on MFD_HI6421_PMIC && OF
				400	help
				401	This driver provides support for the voltage regulators on the
				402	HiSilicon Hi6421 PMU / Codec IC.
				403	Hi6421 is a multi-function device which, on regulator part, provides
				404	21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
				405	of them come with support to either ECO (idle) or sleep mode.
				406
Wang Xiaoyin	5c7024a	2017-06-07 15:06:03 +0800	[diff] [blame]	407	config REGULATOR_HI6421V530
				408	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
				409	depends on MFD_HI6421_PMIC && OF
				410	help
				411	This driver provides support for the voltage regulators on
				412	HiSilicon Hi6421v530 PMU / Codec IC.
				413	Hi6421v530 is a multi-function device which, on regulator part,
				414	provides 5 general purpose LDOs, and all of them come with support
				415	to either ECO (idle) or sleep mode.
				416
Chen Feng	4618119	2016-02-14 14:29:22 +0800	[diff] [blame]	417	config REGULATOR_HI655X
				418	tristate "Hisilicon HI655X PMIC regulators support"
				419	depends on ARCH_HISI \|\| COMPILE_TEST
				420	depends on MFD_HI655X_PMIC && OF
				421	help
				422	This driver provides support for the voltage regulators of the
				423	Hisilicon Hi655x PMIC device.
				424
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	425	config REGULATOR_ISL9305
				426	tristate "Intersil ISL9305 regulator"
				427	depends on I2C
Axel Lin	ba441ec	2014-09-10 08:44:36 +0800	[diff] [blame]	428	select REGMAP_I2C
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	429	help
				430	This driver supports ISL9305 voltage regulator chip.
				431
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	432	config REGULATOR_ISL6271A
				433	tristate "Intersil ISL6271A Power regulator"
				434	depends on I2C
				435	help
				436	This driver supports ISL6271A voltage regulator chip.
				437
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	438	config REGULATOR_LM363X
				439	tristate "TI LM363X voltage regulators"
				440	depends on MFD_TI_LMU
				441	help
Dan Murphy	bff5e80	2019-06-05 07:56:32 -0500	[diff] [blame]	442	This driver supports LM3631, LM3632 and LM36274 voltage regulators for
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	443	the LCD bias.
				444	One boost output voltage is configurable and always on.
				445	Other LDOs are used for the display module.
				446
Charles Keepax	bef9391	2018-10-08 14:25:41 +0100	[diff] [blame]	447	config REGULATOR_LOCHNAGAR
				448	tristate "Cirrus Logic Lochnagar regulator driver"
				449	depends on MFD_LOCHNAGAR
				450	help
				451	This enables regulator support on the Cirrus Logic Lochnagar audio
				452	development board.
				453
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	454	config REGULATOR_LP3971
				455	tristate "National Semiconductors LP3971 PMIC regulator driver"
				456	depends on I2C
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	457	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	458	Say Y here to support the voltage regulators and convertors
				459	on National Semiconductors LP3971 PMIC
				460
				461	config REGULATOR_LP3972
				462	tristate "National Semiconductors LP3972 PMIC regulator driver"
				463	depends on I2C
				464	help
				465	Say Y here to support the voltage regulators and convertors
				466	on National Semiconductors LP3972 PMIC
				467
				468	config REGULATOR_LP872X
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	469	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin	613965f	2013-08-30 22:13:44 +0800	[diff] [blame]	470	depends on I2C
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	471	select REGMAP_I2C
				472	help
				473	This driver supports LP8720/LP8725 PMIC
				474
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	475	config REGULATOR_LP873X
				476	tristate "TI LP873X Power regulators"
Keerthy	f618ed2	2016-08-31 14:28:12 +0530	[diff] [blame]	477	depends on MFD_TI_LP873X && OF
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	478	help
				479	This driver supports LP873X voltage regulator chips. LP873X
				480	provides two step-down converters and two general-purpose LDO
				481	voltage regulators. It supports software based voltage control
				482	for different voltage domains
				483
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	484	config REGULATOR_LP8755
				485	tristate "TI LP8755 High Performance PMU driver"
				486	depends on I2C
				487	select REGMAP_I2C
				488	help
				489	This driver supports LP8755 High Performance PMU driver. This
				490	chip contains six step-down DC/DC converters which can support
				491	9 mode multiphase configuration.
				492
Keerthy	f0168a9	2017-05-23 17:46:55 +0530	[diff] [blame]	493	config REGULATOR_LP87565
				494	tristate "TI LP87565 Power regulators"
				495	depends on MFD_TI_LP87565 && OF
				496	help
				497	This driver supports LP87565 voltage regulator chips. LP87565
				498	provides four step-down converters. It supports software based
				499	voltage control for different voltage domains
				500
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	501	config REGULATOR_LP8788
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	502	tristate "TI LP8788 Power Regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	503	depends on MFD_LP8788
				504	help
				505	This driver supports LP8788 voltage regulator chip.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	506
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	507	config REGULATOR_LTC3589
Axel Lin	ac1d686	2014-05-27 13:51:49 +0800	[diff] [blame]	508	tristate "LTC3589 8-output voltage regulator"
				509	depends on I2C
				510	select REGMAP_I2C
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	511	help
				512	This enables support for the LTC3589, LTC3589-1, and LTC3589-2
				513	8-output regulators controlled via I2C.
				514
Tim Harvey	37b918a	2016-08-15 12:40:23 -0700	[diff] [blame]	515	config REGULATOR_LTC3676
				516	tristate "LTC3676 8-output voltage regulator"
				517	depends on I2C
				518	select REGMAP_I2C
				519	help
				520	This enables support for the LTC3676
				521	8-output regulators controlled via I2C.
				522
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	523	config REGULATOR_MAX14577
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	524	tristate "Maxim 14577/77836 regulator"
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	525	depends on MFD_MAX14577
				526	help
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	527	This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
				528	The MAX14577 regulators include safeout LDO and charger current
				529	regulator. The MAX77836 has two additional LDOs.
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	530
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	531	config REGULATOR_MAX1586
				532	tristate "Maxim 1586/1587 voltage regulator"
				533	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	534	help
				535	This driver controls a Maxim 1586 or 1587 voltage output
				536	regulator via I2C bus. The provided regulator is suitable
				537	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				538
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	539	config REGULATOR_MAX77620
				540	tristate "Maxim 77620/MAX20024 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	541	depends on MFD_MAX77620 \|\| COMPILE_TEST
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	542	help
				543	This driver controls Maxim MAX77620 voltage output regulator
				544	via I2C bus. The provided regulator is suitable for Tegra
				545	chip to control Step-Down DC-DC and LDOs. Say Y here to
				546	enable the regulator driver.
				547
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	548	config REGULATOR_MAX77650
				549	tristate "Maxim MAX77650/77651 regulator support"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	550	depends on MFD_MAX77650 \|\| COMPILE_TEST
Bartosz Golaszewski	bcc61f1	2019-01-29 14:35:40 +0100	[diff] [blame]	551	help
				552	Regulator driver for MAX77650/77651 PMIC from Maxim
				553	Semiconductor. This device has a SIMO with three independent
				554	power rails and an LDO.
				555
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	556	config REGULATOR_MAX8649
				557	tristate "Maxim 8649 voltage regulator"
				558	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	559	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	560	help
				561	This driver controls a Maxim 8649 voltage output regulator via
				562	I2C bus.
				563
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	564	config REGULATOR_MAX8660
				565	tristate "Maxim 8660/8661 voltage regulator"
				566	depends on I2C
				567	help
				568	This driver controls a Maxim 8660/8661 voltage output
				569	regulator via I2C bus.
				570
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	571	config REGULATOR_MAX8907
				572	tristate "Maxim 8907 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	573	depends on MFD_MAX8907 \|\| COMPILE_TEST
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	574	help
				575	This driver controls a Maxim 8907 voltage output regulator
				576	via I2C bus. The provided regulator is suitable for Tegra
				577	chip to control Step-Down DC-DC and LDOs.
				578
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	579	config REGULATOR_MAX8925
				580	tristate "Maxim MAX8925 Power Management IC"
				581	depends on MFD_MAX8925
				582	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	583	Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	584
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	585	config REGULATOR_MAX8952
				586	tristate "Maxim MAX8952 Power Management IC"
				587	depends on I2C
				588	help
				589	This driver controls a Maxim 8952 voltage output regulator
				590	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				591	modes ranging from 0.77V to 1.40V by 0.01V steps.
				592
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	593	config REGULATOR_MAX8973
				594	tristate "Maxim MAX8973 voltage regulator "
				595	depends on I2C
Laxman Dewangan	d2d5437b	2016-04-13 15:29:45 +0530	[diff] [blame]	596	depends on THERMAL && THERMAL_OF
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	597	select REGMAP_I2C
				598	help
				599	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	600	switching regulator delivers up to 9A of output current. Each
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	601	phase operates at a 2MHz fixed frequency with a 120 deg shift
				602	from the adjacent phase, allowing the use of small magnetic component.
				603
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	604	config REGULATOR_MAX8997
				605	tristate "Maxim 8997/8966 regulator"
				606	depends on MFD_MAX8997
				607	help
				608	This driver controls a Maxim 8997/8966 regulator
				609	via I2C bus. The provided regulator is suitable for S5PC110,
				610	S5PV210, and Exynos-4 chips to control VCC_CORE and
				611	VCC_USIM voltages.
				612
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	613	config REGULATOR_MAX8998
				614	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	615	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	616	help
				617	This driver controls a Maxim 8998 voltage output regulator
				618	via I2C bus. The provided regulator is suitable for S3C6410
				619	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				620
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	621	config REGULATOR_MAX77686
				622	tristate "Maxim 77686 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	623	depends on MFD_MAX77686 \|\| COMPILE_TEST
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	624	help
				625	This driver controls a Maxim 77686 regulator
				626	via I2C bus. The provided regulator is suitable for
				627	Exynos-4 chips to control VARM and VINT voltages.
				628
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	629	config REGULATOR_MAX77693
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	630	tristate "Maxim 77693/77843 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	631	depends on MFD_MAX77693 \|\| MFD_MAX77843 \|\| COMPILE_TEST
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	632	help
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	633	This driver controls a Maxim 77693/77843 regulators via I2C bus.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	634	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
				635	and one current regulator 'CHARGER'. This is suitable for
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	636	Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	637
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	638	config REGULATOR_MAX77802
				639	tristate "Maxim 77802 regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	640	depends on MFD_MAX77686 \|\| COMPILE_TEST
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	641	help
				642	This driver controls a Maxim 77802 regulator
				643	via I2C bus. The provided regulator is suitable for
				644	Exynos5420/Exynos5800 SoCs to control various voltages.
				645	It includes support for control of voltage and ramp speed.
				646
Iskren Chernev	e731465	2020-04-14 20:22:48 +0300	[diff] [blame]	647	config REGULATOR_MAX77826
				648	tristate "Maxim 77826 regulator"
				649	depends on I2C
				650	select REGMAP_I2C
				651	help
				652	This driver controls a Maxim 77826 regulator via I2C bus.
				653	The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
				654	It includes support for control of output voltage. This
				655	regulator is found on the Samsung Galaxy S5 (klte) smartphone.
				656
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	657	config REGULATOR_MC13XXX_CORE
				658	tristate
				659
				660	config REGULATOR_MC13783
				661	tristate "Freescale MC13783 regulator driver"
Alexander Shiyan	e5a3da2	2013-12-14 17:03:10 +0400	[diff] [blame]	662	depends on MFD_MC13XXX
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	663	select REGULATOR_MC13XXX_CORE
				664	help
				665	Say y here to support the regulators found on the Freescale MC13783
				666	PMIC.
				667
				668	config REGULATOR_MC13892
				669	tristate "Freescale MC13892 regulator driver"
				670	depends on MFD_MC13XXX
				671	select REGULATOR_MC13XXX_CORE
				672	help
				673	Say y here to support the regulators found on the Freescale MC13892
				674	PMIC.
				675
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	676	config REGULATOR_MCP16502
				677	tristate "Microchip MCP16502 PMIC"
				678	depends on I2C && OF
Axel Lin	77ea906	2018-12-21 10:49:29 +0800	[diff] [blame]	679	select REGMAP_I2C
Andrei.Stefanescu@microchip.com	919261c	2018-12-12 18:31:18 +0000	[diff] [blame]	680	help
				681	Say y here to support the MCP16502 PMIC. This driver supports
				682	basic operations (get/set voltage, get/set operating mode)
				683	through the regulator interface. In addition it enables
				684	suspend-to-ram/standby transition.
				685
Saravanan Sekar	a273188	2020-02-04 12:04:18 +0100	[diff] [blame]	686	config REGULATOR_MP5416
				687	tristate "Monolithic MP5416 PMIC"
				688	depends on I2C && OF
				689	select REGMAP_I2C
				690	help
				691	Say y here to support the MP5416 PMIC. This will enable supports
				692	the software controllable 4 buck and 4 LDO regulators.
				693	Say M here if you want to include support for the regulator as a
				694	module.
				695
Markus Reichl	c66f1cb	2020-01-06 22:16:25 +0100	[diff] [blame]	696	config REGULATOR_MP8859
				697	tristate "MPS MP8859 regulator driver"
				698	depends on I2C
				699	select REGMAP_I2C
				700	help
				701	Say y here to support the MP8859 voltage regulator. This driver
				702	supports basic operations (get/set voltage) through the regulator
				703	interface.
				704	Say M here if you want to include support for the regulator as a
				705	module. The module will be named "mp8859".
				706
Jisheng Zhang	97be8288	2020-03-16 22:30:20 +0800	[diff] [blame]	707	config REGULATOR_MP886X
				708	tristate "MPS MP8869 regulator driver"
				709	depends on I2C && (OF \|\| COMPILE_TEST)
				710	select REGMAP_I2C
				711	help
				712	This driver supports the MP8869 voltage regulator.
				713
Saravanan Sekar	6501c1f	2020-01-09 20:53:46 +0100	[diff] [blame]	714	config REGULATOR_MPQ7920
				715	tristate "Monolithic MPQ7920 PMIC"
				716	depends on I2C && OF
				717	select REGMAP_I2C
				718	help
				719	Say y here to support the MPQ7920 PMIC. This will enable supports
				720	the software controllable 4 buck and 5 LDO regulators.
				721	This driver supports the control of different power rails of device
				722	through regulator interface.
				723
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	724	config REGULATOR_MT6311
				725	tristate "MediaTek MT6311 PMIC"
				726	depends on I2C
Henry Chen	aab3c3f	2015-11-17 16:36:49 +0800	[diff] [blame]	727	select REGMAP_I2C
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	728	help
				729	Say y here to select this option to enable the power regulator of
				730	MediaTek MT6311 PMIC.
				731	This driver supports the control of different power rails of device
				732	through regulator interface.
				733
Hsin-Hsiung Wang	7aa382c	2021-02-07 14:14:16 +0800	[diff] [blame]	734	config REGULATOR_MT6315
				735	tristate "MediaTek MT6315 PMIC"
				736	depends on SPMI
				737	select REGMAP_SPMI
				738	help
				739	Say y here to select this option to enable the power regulator of
				740	MediaTek MT6315 PMIC.
				741	This driver supports the control of different power rails of device
				742	through regulator interface.
				743
Chen Zhong	2fdf829	2016-07-18 14:40:51 +0200	[diff] [blame]	744	config REGULATOR_MT6323
				745	tristate "MediaTek MT6323 PMIC"
				746	depends on MFD_MT6397
				747	help
				748	Say y here to select this option to enable the power regulator of
				749	MediaTek MT6323 PMIC.
				750	This driver supports the control of different power rails of device
				751	through regulator interface.
				752
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	753	config REGULATOR_MT6358
				754	tristate "MediaTek MT6358 PMIC"
Axel Lin	1b3bcca	2020-06-16 21:50:30 +0800	[diff] [blame]	755	depends on MFD_MT6397
Hsin-Hsiung Wang	f67ff1b	2019-08-23 11:45:28 +0800	[diff] [blame]	756	help
				757	Say y here to select this option to enable the power regulator of
				758	MediaTek MT6358 PMIC.
				759	This driver supports the control of different power rails of device
				760	through regulator interface.
				761
Gene Chen	d321571	2020-08-26 18:49:17 +0800	[diff] [blame]	762	config REGULATOR_MT6360
				763	tristate "MT6360 SubPMIC Regulator"
				764	depends on MFD_MT6360
				765	help
				766	Say Y here to enable MT6360 regulator support.
				767	This is support MT6360 PMIC/LDO part include
				768	2-channel buck with Thermal Shutdown and Overload Protection
				769	6-channel High PSRR and Low Dropout LDO.
				770
Chenglin Xu	a551e27	2017-08-15 17:09:15 +0800	[diff] [blame]	771	config REGULATOR_MT6380
				772	tristate "MediaTek MT6380 PMIC"
				773	depends on MTK_PMIC_WRAP
				774	help
				775	Say y here to select this option to enable the power regulator of
				776	MediaTek MT6380 PMIC.
				777	This driver supports the control of different power rails of device
				778	through regulator interface.
				779
Flora Fu	0425e24	2014-12-05 12:07:54 +0800	[diff] [blame]	780	config REGULATOR_MT6397
				781	tristate "MediaTek MT6397 PMIC"
				782	depends on MFD_MT6397
				783	help
				784	Say y here to select this option to enable the power regulator of
				785	MediaTek MT6397 PMIC.
				786	This driver supports the control of different power rails of device
				787	through regulator interface.
				788
henryc.chen	a0db6b0	2020-12-24 14:08:52 +0800	[diff] [blame]	789	config REGULATOR_MTK_DVFSRC
				790	tristate "MediaTek DVFSRC regulator driver"
				791	depends on MTK_DVFSRC
				792	help
				793	Say y here to control regulator by DVFSRC (dynamic voltage
				794	and frequency scaling resource collector).
				795	This driver supports to control regulators via the DVFSRC
				796	of Mediatek. It allows for voting on regulator state
				797	between multiple users.
				798
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	799	config REGULATOR_PALMAS
				800	tristate "TI Palmas PMIC Regulators"
				801	depends on MFD_PALMAS
				802	help
				803	If you wish to control the regulators on the Palmas series of
				804	chips say Y here. This will enable support for all the software
				805	controllable SMPS/LDO regulators.
				806
				807	The regulators available on Palmas series chips vary depending
				808	on the muxing. This is handled automatically in the driver by
				809	reading the mux info from OTP.
				810
Balaji T K	11469e0	2014-02-19 20:26:40 +0530	[diff] [blame]	811	config REGULATOR_PBIAS
				812	tristate "PBIAS OMAP regulator driver"
				813	depends on (ARCH_OMAP \|\| COMPILE_TEST) && MFD_SYSCON
				814	help
				815	Say y here to support pbias regulator for mmc1:SD card i/o
				816	on OMAP SoCs.
				817	This driver provides support for OMAP pbias modelled
				818	regulators.
				819
Robin Gong	0935ff5f	2020-07-04 00:19:35 +0800	[diff] [blame]	820	config REGULATOR_PCA9450
				821	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
				822	depends on I2C
				823	select REGMAP_I2C
				824	help
				825	Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
				826	regulator driver.
				827
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	828	config REGULATOR_PCAP
				829	tristate "Motorola PCAP2 regulator driver"
				830	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	831	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	832	This driver provides support for the voltage regulators of the
				833	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	834
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	835	config REGULATOR_PCF50633
				836	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	837	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	838	help
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	839	Say Y here to support the voltage regulators and converters
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	840	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	841
Jagan Teki	d3795d6	2020-11-30 16:53:29 +0530	[diff] [blame]	842	config REGULATOR_PF8X00
				843	tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
				844	depends on I2C && OF
				845	select REGMAP_I2C
				846	help
				847	Say y here to support the regulators found on the NXP
				848	PF8100/PF8121A/PF8200 PMIC.
				849
Adrien Grassein	4d23b84	2021-01-14 18:47:09 +0100	[diff] [blame]	850	Say M here if you want to support for the regulators found
				851	on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
				852	"pf8x00-regulator".
				853
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	854	config REGULATOR_PFUZE100
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	855	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
Fabio Estevam	6a6939d	2020-12-10 18:27:48 -0300	[diff] [blame]	856	depends on I2C && OF
Axel Lin	94421b0	2013-07-29 12:08:01 +0800	[diff] [blame]	857	select REGMAP_I2C
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	858	help
Axel Lin	2cee212	2014-03-05 18:02:43 +0800	[diff] [blame]	859	Say y here to support the regulators found on the Freescale
Stefan Wahren	297101a	2018-06-15 13:44:53 +0200	[diff] [blame]	860	PFUZE100/200/3000/3001 PMIC.
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	861
James Ban	f307a7e	2015-11-19 09:59:15 +0900	[diff] [blame]	862	config REGULATOR_PV88060
				863	tristate "Powerventure Semiconductor PV88060 regulator"
				864	depends on I2C
				865	select REGMAP_I2C
				866	help
				867	Say y here to support the voltage regulators and convertors
				868	PV88060
				869
James Ban	99cf3af	2016-04-15 13:34:22 +0900	[diff] [blame]	870	config REGULATOR_PV88080
				871	tristate "Powerventure Semiconductor PV88080 regulator"
				872	depends on I2C
				873	select REGMAP_I2C
				874	help
				875	Say y here to support the buck convertors on PV88080
				876
James Ban	c90456e	2015-12-08 10:57:29 +0900	[diff] [blame]	877	config REGULATOR_PV88090
				878	tristate "Powerventure Semiconductor PV88090 regulator"
				879	depends on I2C
				880	select REGMAP_I2C
				881	help
				882	Say y here to support the voltage regulators and convertors
				883	on PV88090
				884
Chris Zhong	aa66cc6	2014-09-28 10:28:53 +0800	[diff] [blame]	885	config REGULATOR_PWM
				886	tristate "PWM voltage regulator"
				887	depends on PWM
				888	help
				889	This driver supports PWM controlled voltage regulators. PWM
				890	duty cycle can increase or decrease the voltage.
				891
Bjorn Andersson	2720386	2014-09-22 16:25:29 -0700	[diff] [blame]	892	config REGULATOR_QCOM_RPM
				893	tristate "Qualcomm RPM regulator driver"
				894	depends on MFD_QCOM_RPM
				895	help
				896	If you say yes to this option, support will be included for the
				897	regulators exposed by the Resource Power Manager found in Qualcomm
				898	8660, 8960 and 8064 based devices.
				899
				900	Say M here if you want to include support for the regulators on the
				901	Qualcomm RPM as a module. The module will be named
				902	"qcom_rpm-regulator".
				903
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	904	config REGULATOR_QCOM_RPMH
				905	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
John Stultz	34c5aa2	2020-11-23 22:23:59 +0000	[diff] [blame]	906	depends on QCOM_RPMH \|\| (QCOM_RPMH=n && COMPILE_TEST)
Arnd Bergmann	d957d16	2020-12-30 15:56:23 +0100	[diff] [blame]	907	depends on QCOM_COMMAND_DB \|\| (QCOM_COMMAND_DB=n && COMPILE_TEST)
David Collins	46fc033	2018-07-13 18:50:59 -0700	[diff] [blame]	908	help
				909	This driver supports control of PMIC regulators via the RPMh hardware
				910	block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
				911	control allows for voting on regulator state between multiple
				912	processors within the SoC.
				913
Bjorn Andersson	da65e36	2015-08-17 11:43:59 -0700	[diff] [blame]	914	config REGULATOR_QCOM_SMD_RPM
				915	tristate "Qualcomm SMD based RPM regulator driver"
				916	depends on QCOM_SMD_RPM
				917	help
				918	If you say yes to this option, support will be included for the
				919	regulators exposed by the Resource Power Manager found in Qualcomm
				920	8974 based devices.
				921
				922	Say M here if you want to include support for the regulators on the
				923	Qualcomm RPM as a module. The module will be named
				924	"qcom_smd-regulator".
				925
Stephen Boyd	e92a404	2015-06-12 15:47:10 -0700	[diff] [blame]	926	config REGULATOR_QCOM_SPMI
				927	tristate "Qualcomm SPMI regulator driver"
				928	depends on SPMI \|\| COMPILE_TEST
				929	help
				930	If you say yes to this option, support will be included for the
				931	regulators found in Qualcomm SPMI PMICs.
				932
				933	Say M here if you want to include support for the regulators on the
				934	Qualcomm SPMI PMICs as a module. The module will be named
				935	"qcom_spmi-regulator".
				936
Wesley Cheng	4fe66d5	2020-06-26 11:55:14 -0700	[diff] [blame]	937	config REGULATOR_QCOM_USB_VBUS
				938	tristate "Qualcomm USB Vbus regulator driver"
				939	depends on SPMI \|\| COMPILE_TEST
				940	help
				941	If you say yes to this option, support will be included for the
				942	regulator used to enable the VBUS output.
				943
				944	Say M here if you want to include support for enabling the VBUS output
				945	as a module. The module will be named "qcom_usb_vbus_regulator".
				946
Marek Vasut	3857347	2020-08-09 12:59:38 +0200	[diff] [blame]	947	config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
				948	tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
				949	depends on BACKLIGHT_CLASS_DEVICE
				950	depends on I2C
				951	select REGMAP_I2C
				952	help
				953	This driver supports ATTINY regulator on the Raspberry Pi 7-inch
				954	touchscreen unit. The regulator is used to enable power to the
				955	TC358762, display and to control backlight.
				956
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	957	config REGULATOR_RC5T583
				958	tristate "RICOH RC5T583 Power regulators"
				959	depends on MFD_RC5T583
				960	help
				961	Select this option to enable the power regulator of RICOH
				962	PMIC RC5T583.
				963	This driver supports the control of different power rails of device
				964	through regulator interface. The device supports multiple DCDC/LDO
				965	outputs which can be controlled by i2c communication.
				966
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	967	config REGULATOR_RK808
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	968	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	969	depends on MFD_RK808
				970	help
				971	Select this option to enable the power regulator of ROCKCHIP
Heiko Stuebner	e444f6d	2019-06-26 14:29:18 +0200	[diff] [blame]	972	PMIC RK805,RK809&RK817,RK808 and RK818.
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	973	This driver supports the control of different power rails of device
				974	through regulator interface. The device supports multiple DCDC/LDO
				975	outputs which can be controlled by i2c communication.
				976
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	977	config REGULATOR_RN5T618
Stefan Agner	ed6d362	2016-06-28 22:53:20 -0700	[diff] [blame]	978	tristate "Ricoh RN5T567/618 voltage regulators"
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	979	depends on MFD_RN5T618
				980	help
Pierre-Hugues Husson	83b2a3c	2017-08-27 15:58:31 +0200	[diff] [blame]	981	Say y here to support the regulators found on Ricoh RN5T567,
				982	RN5T618 or RC5T619 PMIC.
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	983
Matti Vaittinen	21b7215	2020-01-20 15:44:45 +0200	[diff] [blame]	984	config REGULATOR_ROHM
				985	tristate
				986
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	987	config REGULATOR_RT4801
				988	tristate "Richtek RT4801 Regulators"
				989	depends on I2C
Axel Lin	02532cb	2020-08-19 16:59:59 +0800	[diff] [blame]	990	select REGMAP_I2C
ChiYuan Huang	5bbbfc7f	2020-08-15 11:14:20 +0800	[diff] [blame]	991	help
				992	This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
				993	The device supports two regulators (DSVP/DSVN).
				994
ChiYuan Huang	9351ab8	2020-12-17 23:00:44 +0800	[diff] [blame]	995	config REGULATOR_RT4831
				996	tristate "Richtek RT4831 DSV Regulators"
				997	depends on MFD_RT4831
				998	help
				999	This adds support for voltage regulators in Richtek RT4831.
				1000	There are three regulators (VLCM/DSVP/DSVN).
				1001	VLCM is a virtual voltage input for DSVP/DSVN inside IC.
				1002	And DSVP/DSVN is the real Vout range from 4V to 6.5V.
				1003	It's common used to provide the power for the display panel.
				1004
Beomho Seo	b191757	2014-11-12 21:07:59 +0900	[diff] [blame]	1005	config REGULATOR_RT5033
				1006	tristate "Richtek RT5033 Regulators"
				1007	depends on MFD_RT5033
				1008	help
				1009	This adds support for voltage and current regulators in Richtek
				1010	RT5033 PMIC. The device supports multiple regulators like
				1011	current source, LDO and Buck.
				1012
ChiYuan Huang	b8c054a	2020-09-28 15:19:43 +0800	[diff] [blame]	1013	config REGULATOR_RTMV20
Axel Lin	5f01de6	2021-05-30 20:41:01 +0800	[diff] [blame^]	1014	tristate "Richtek RTMV20 Laser Diode Regulator"
ChiYuan Huang	b8c054a	2020-09-28 15:19:43 +0800	[diff] [blame]	1015	depends on I2C
				1016	select REGMAP_I2C
				1017	help
				1018	This driver adds support for the load switch current regulator on
				1019	the Richtek RTMV20. It can support the load current up to 6A and
				1020	integrate strobe/vsync/fsin signal to synchronize the IR camera.
				1021
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1022	config REGULATOR_S2MPA01
				1023	tristate "Samsung S2MPA01 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1024	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1025	help
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	1026	This driver controls Samsung S2MPA01 voltage output regulator
				1027	via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
				1028
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1029	config REGULATOR_S2MPS11
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1030	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1031	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1032	help
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	1033	This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
Chanwoo Choi	76b9840	2014-11-18 17:59:40 +0900	[diff] [blame]	1034	output regulator via I2C bus. The chip is comprised of high efficient
				1035	Buck converters including Dual-Phase Buck converter, Buck-Boost
				1036	converter, various LDOs.
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	1037
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1038	config REGULATOR_S5M8767
				1039	tristate "Samsung S5M8767A voltage regulator"
Krzysztof Kozlowski	0c7d1b4	2020-09-20 23:41:07 +0200	[diff] [blame]	1040	depends on MFD_SEC_CORE \|\| COMPILE_TEST
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1041	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1042	This driver supports a Samsung S5M8767A voltage output regulator
				1043	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				1044	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	1045
Erick Chen	433c9bb	2017-12-05 14:35:46 +0800	[diff] [blame]	1046	config REGULATOR_SC2731
				1047	tristate "Spreadtrum SC2731 power regulator driver"
				1048	depends on MFD_SC27XX_PMIC \|\| COMPILE_TEST
				1049	help
				1050	This driver provides support for the voltage regulators on the
				1051	SC2731 PMIC.
				1052
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1053	config REGULATOR_SKY81452
				1054	tristate "Skyworks Solutions SKY81452 voltage regulator"
Gyungoh Yoo	70b5b27	2014-11-17 17:33:10 +0900	[diff] [blame]	1055	depends on MFD_SKY81452
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1056	help
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	1057	This driver supports Skyworks SKY81452 voltage output regulator
				1058	via I2C bus. SKY81452 has one voltage linear regulator can be
				1059	programmed from 4.5V to 20V.
				1060
				1061	This driver can also be built as a module. If so, the module
				1062	will be called sky81452-regulator.
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	1063
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1064	config REGULATOR_SLG51000
Krzysztof Kozlowski	76bec25	2019-11-20 21:39:49 +0800	[diff] [blame]	1065	tristate "Dialog Semiconductor SLG51000 regulators"
				1066	depends on I2C
				1067	select REGMAP_I2C
				1068	help
Eric Jeong	a867bde	2019-04-18 15:09:44 +0900	[diff] [blame]	1069	Say y here to support for the Dialog Semiconductor SLG51000.
				1070	The SLG51000 is seven compact and customizable low dropout
				1071	regulators.
				1072
Fabrice Gasnier	4e210fb	2019-07-01 10:14:23 +0200	[diff] [blame]	1073	config REGULATOR_STM32_BOOSTER
				1074	tristate "STMicroelectronics STM32 BOOSTER"
				1075	depends on ARCH_STM32 \|\| COMPILE_TEST
				1076	help
				1077	This driver supports internal booster (3V3) embedded in some
				1078	STMicroelectronics STM32 chips. It can be used to supply ADC analog
				1079	input switches when vdda supply is below 2.7V.
				1080
				1081	This driver can also be built as a module. If so, the module
				1082	will be called stm32-booster.
				1083
Fabrice Gasnier	0cdbf48	2017-08-30 17:55:28 +0200	[diff] [blame]	1084	config REGULATOR_STM32_VREFBUF
				1085	tristate "STMicroelectronics STM32 VREFBUF"
				1086	depends on ARCH_STM32 \|\| COMPILE_TEST
				1087	help
				1088	This driver supports STMicroelectronics STM32 VREFBUF (voltage
				1089	reference buffer) which can be used as voltage reference for
				1090	internal ADCs, DACs and also for external components through
				1091	dedicated Vref+ pin.
				1092
				1093	This driver can also be built as a module. If so, the module
				1094	will be called stm32-vrefbuf.
				1095
Pascal PAILLET-LME	6cdae81	2019-04-15 09:17:38 +0000	[diff] [blame]	1096	config REGULATOR_STM32_PWR
				1097	bool "STMicroelectronics STM32 PWR"
				1098	depends on ARCH_STM32 \|\| COMPILE_TEST
				1099	help
				1100	This driver supports internal regulators (1V1, 1V8, 3V3) in the
				1101	STMicroelectronics STM32 chips.
				1102
pascal paillet	ca55b71	2018-10-08 16:29:40 +0000	[diff] [blame]	1103	config REGULATOR_STPMIC1
				1104	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
				1105	depends on MFD_STPMIC1
				1106	help
				1107	This driver supports STMicroelectronics STPMIC1 PMIC voltage
				1108	regulators and switches. The STPMIC1 regulators supply power to
				1109	an application processor as well as to external system
				1110	peripherals such as DDR, Flash memories and system devices.
				1111
				1112	To compile this driver as a module, choose M here: the
				1113	module will be called stpmic1_regulator.
				1114
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1115	config REGULATOR_TI_ABB
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1116	tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1117	depends on ARCH_OMAP
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	1118	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	1119	Select this option to support Texas Instruments' on-chip Adaptive Body
				1120	Bias (ABB) LDO regulators. It is recommended that this option be
				1121	enabled on required TI SoC. Certain Operating Performance Points
				1122	on TI SoCs may be unstable without enabling this as it provides
				1123	device specific optimized bias to allow/optimize functionality.
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	1124
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1125	config REGULATOR_STW481X_VMMC
				1126	bool "ST Microelectronics STW481X VMMC regulator"
Luis de Bethencourt	4049dc1	2015-10-12 17:27:08 +0100	[diff] [blame]	1127	depends on MFD_STW481X \|\| COMPILE_TEST
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	1128	default y if MFD_STW481X
				1129	help
				1130	This driver supports the internal VMMC regulator in the STw481x
				1131	PMIC chips.
				1132
Ondrej Jirman	8878302	2018-05-07 20:29:41 +0800	[diff] [blame]	1133	config REGULATOR_SY8106A
				1134	tristate "Silergy SY8106A regulator"
				1135	depends on I2C && (OF \|\| COMPILE_TEST)
				1136	select REGMAP_I2C
				1137	help
				1138	This driver supports SY8106A single output regulator.
				1139
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1140	config REGULATOR_SY8824X
Jisheng Zhang	67a7b05	2019-08-27 08:47:30 +0000	[diff] [blame]	1141	tristate "Silergy SY8824C/SY8824E regulator"
Jisheng Zhang	d5a2b82	2019-08-27 08:45:33 +0000	[diff] [blame]	1142	depends on I2C && (OF \|\| COMPILE_TEST)
				1143	select REGMAP_I2C
				1144	help
				1145	This driver supports SY8824C single output regulator.
				1146
Jisheng Zhang	38fc6f2	2020-07-02 17:14:38 +0800	[diff] [blame]	1147	config REGULATOR_SY8827N
				1148	tristate "Silergy SY8827N regulator"
				1149	depends on I2C && (OF \|\| COMPILE_TEST)
				1150	select REGMAP_I2C
				1151	help
				1152	This driver supports SY8827N single output regulator.
				1153
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1154	config REGULATOR_TPS51632
				1155	tristate "TI TPS51632 Power Regulator"
				1156	depends on I2C
				1157	select REGMAP_I2C
				1158	help
				1159	This driver supports TPS51632 voltage regulator chip.
Axel Lin	7bde767	2012-11-01 14:02:36 +0800	[diff] [blame]	1160	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	1161	with Serial VID control and DVFS.
				1162	The voltage output can be configure through I2C interface or PWM
				1163	interface.
				1164
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	1165	config REGULATOR_TPS6105X
				1166	tristate "TI TPS6105X Power regulators"
				1167	depends on TPS6105X
				1168	default y if TPS6105X
				1169	help
				1170	This driver supports TPS61050/TPS61052 voltage regulator chips.
				1171	It is a single boost converter primarily for white LEDs and
				1172	audio amplifiers.
				1173
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1174	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1175	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1176	depends on I2C
				1177	select REGMAP_I2C
				1178	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	1179	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1180	regulator is meant for processor core supply. This chip is
				1181	high-frequency synchronous step down dc-dc converter optimized
				1182	for battery-powered portable applications.
				1183
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1184	config REGULATOR_TPS65023
				1185	tristate "TI TPS65023 Power regulators"
				1186	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	1187	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	1188	help
				1189	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				1190	three step-down converters and two general-purpose LDO voltage regulators.
				1191	It supports TI's software based Class-2 SmartReflex implementation.
				1192
				1193	config REGULATOR_TPS6507X
				1194	tristate "TI TPS6507X Power regulators"
				1195	depends on I2C
				1196	help
				1197	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				1198	three step-down converters and two general-purpose LDO voltage regulators.
				1199	It supports TI's software based Class-2 SmartReflex implementation.
				1200
Andrew F. Davis	d2a2e72	2015-11-04 11:12:14 -0600	[diff] [blame]	1201	config REGULATOR_TPS65086
				1202	tristate "TI TPS65086 Power regulators"
				1203	depends on MFD_TPS65086
				1204	help
				1205	This driver provides support for the voltage regulators on
				1206	TI TPS65086 PMICs.
				1207
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	1208	config REGULATOR_TPS65090
				1209	tristate "TI TPS65090 Power regulator"
				1210	depends on MFD_TPS65090
				1211	help
				1212	This driver provides support for the voltage regulators on the
				1213	TI TPS65090 PMIC.
				1214
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1215	config REGULATOR_TPS65132
				1216	tristate "TI TPS65132 Dual Output Power regulators"
				1217	depends on I2C && GPIOLIB
				1218	select REGMAP_I2C
				1219	help
				1220	This driver supports TPS65132 single inductor - dual output
Krzysztof Kozlowski	48f1b4e	2019-01-08 13:12:33 +0100	[diff] [blame]	1221	power supply specifically designed for display panels.
Venkat Reddy Talla	77c129b	2017-04-12 15:44:36 +0530	[diff] [blame]	1222
AnilKumar Ch	a493077f	2012-01-11 16:11:49 +0530	[diff] [blame]	1223	config REGULATOR_TPS65217
				1224	tristate "TI TPS65217 Power regulators"
				1225	depends on MFD_TPS65217
				1226	help
				1227	This driver supports TPS65217 voltage regulator chips. TPS65217
				1228	provides three step-down converters and four general-purpose LDO
				1229	voltage regulators. It supports software based voltage control
				1230	for different voltage domains
				1231
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1232	config REGULATOR_TPS65218
				1233	tristate "TI TPS65218 Power regulators"
Axel Lin	948838a	2014-02-19 16:35:03 +0800	[diff] [blame]	1234	depends on MFD_TPS65218 && OF
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	1235	help
				1236	This driver supports TPS65218 voltage regulator chips. TPS65218
				1237	provides six step-down converters and one general-purpose LDO
				1238	voltage regulators. It supports software based voltage control
				1239	for different voltage domains
				1240
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	1241	config REGULATOR_TPS6524X
				1242	tristate "TI TPS6524X Power regulators"
				1243	depends on SPI
				1244	help
				1245	This driver supports TPS6524X voltage regulator chips. TPS6524X
				1246	provides three step-down converters and two general-purpose LDO
				1247	voltage regulators. This device is interfaced using a customized
				1248	serial interface currently supported on the sequencer serial
				1249	port controller.
				1250
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1251	config REGULATOR_TPS6586X
				1252	tristate "TI TPS6586X Power regulators"
				1253	depends on MFD_TPS6586X
				1254	help
				1255	This driver supports TPS6586X voltage regulator chips.
				1256
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1257	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1258	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1259	depends on MFD_TPS65910
				1260	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	1261	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	1262
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1263	config REGULATOR_TPS65912
				1264	tristate "TI TPS65912 Power regulator"
Andrew F. Davis	33f9d8c	2016-01-25 09:43:46 -0600	[diff] [blame]	1265	depends on MFD_TPS65912
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1266	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1267	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	1268
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1269	config REGULATOR_TPS80031
Sebastiaan Schalbroeck	3b06349	2016-08-22 18:23:14 +0200	[diff] [blame]	1270	tristate "TI TPS80031/TPS80032 power regulator driver"
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	1271	depends on MFD_TPS80031
				1272	help
				1273	TPS80031/ TPS80032 Fully Integrated Power Management with Power
				1274	Path and Battery Charger. It has 5 configurable step-down
				1275	converters, 11 general purpose LDOs, VBUS generator and digital
				1276	output to control regulators.
				1277
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1278	config REGULATOR_TWL4030
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	1279	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1280	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1281	help
				1282	This driver supports the voltage regulators provided by
				1283	this family of companion chips.
				1284
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1285	config REGULATOR_UNIPHIER
				1286	tristate "UniPhier regulator driver"
				1287	depends on ARCH_UNIPHIER \|\| COMPILE_TEST
Axel Lin	a71bcdf	2019-03-25 18:59:19 +0800	[diff] [blame]	1288	depends on OF
				1289	select REGMAP_MMIO
Kunihiko Hayashi	9df4f90	2018-07-11 13:30:52 +0900	[diff] [blame]	1290	default ARCH_UNIPHIER
				1291	help
				1292	Support for regulators implemented on Socionext UniPhier SoCs.
				1293
Matthias Kaehlcke	9dee7a7	2017-04-07 12:51:58 -0700	[diff] [blame]	1294	config REGULATOR_VCTRL
				1295	tristate "Voltage controlled regulators"
				1296	depends on OF
				1297	help
				1298	This driver provides support for voltage regulators whose output
				1299	voltage is controlled by the voltage of another regulator.
				1300
Pawel Moll	31e5408	2012-09-24 18:56:54 +0100	[diff] [blame]	1301	config REGULATOR_VEXPRESS
				1302	tristate "Versatile Express regulators"
				1303	depends on VEXPRESS_CONFIG
				1304	help
				1305	This driver provides support for voltage regulators available
				1306	on the ARM Ltd's Versatile Express platform.
				1307
Robert Marko	ebf652b	2020-01-12 12:30:01 +0100	[diff] [blame]	1308	config REGULATOR_VQMMC_IPQ4019
				1309	tristate "IPQ4019 VQMMC SD LDO regulator support"
				1310	depends on ARCH_QCOM
				1311	help
				1312	This driver provides support for the VQMMC LDO I/0
				1313	voltage regulator of the IPQ4019 SD/EMMC controller.
				1314
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1315	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	1316	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	1317	depends on MFD_WM831X
				1318	help
				1319	Support the voltage and current regulators of the WM831x series
				1320	of PMIC devices.
				1321
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1322	config REGULATOR_WM8350
				1323	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				1324	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1325	help
				1326	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	1327	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	1328
				1329	config REGULATOR_WM8400
				1330	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				1331	depends on MFD_WM8400
				1332	help
				1333	This driver provides support for the voltage regulators of the
				1334	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	1335
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1336	config REGULATOR_WM8994
				1337	tristate "Wolfson Microelectronics WM8994 CODEC"
				1338	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	1339	help
				1340	This driver provides support for the voltage regulators on the
				1341	WM8994 CODEC.
				1342
Nisha Kumari	498ab2f	2020-06-22 18:11:10 +0530	[diff] [blame]	1343	config REGULATOR_QCOM_LABIBB
				1344	tristate "QCOM LAB/IBB regulator support"
				1345	depends on SPMI \|\| COMPILE_TEST
				1346	help
				1347	This driver supports Qualcomm's LAB/IBB regulators present on the
				1348	Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
				1349	based PMIC implementations. LAB can be used as positive
				1350	boost regulator and IBB can be used as a negative boost regulator
				1351	for LCD display panel.
				1352
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1353	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	1354