Thomas Gleixner | 09c434b | 2019-05-19 13:08:20 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 2 | /* |
| 3 | * AMD am53c974 driver. |
| 4 | * Copyright (c) 2014 Hannes Reinecke, SUSE Linux GmbH |
| 5 | */ |
| 6 | |
| 7 | #include <linux/kernel.h> |
| 8 | #include <linux/module.h> |
| 9 | #include <linux/init.h> |
| 10 | #include <linux/delay.h> |
| 11 | #include <linux/pci.h> |
| 12 | #include <linux/interrupt.h> |
| 13 | |
| 14 | #include <scsi/scsi_host.h> |
| 15 | |
| 16 | #include "esp_scsi.h" |
| 17 | |
| 18 | #define DRV_MODULE_NAME "am53c974" |
| 19 | #define DRV_MODULE_VERSION "1.00" |
| 20 | |
| 21 | static bool am53c974_debug; |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 22 | static bool am53c974_fenab = true; |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 23 | |
| 24 | #define esp_dma_log(f, a...) \ |
| 25 | do { \ |
| 26 | if (am53c974_debug) \ |
| 27 | shost_printk(KERN_DEBUG, esp->host, f, ##a); \ |
| 28 | } while (0) |
| 29 | |
| 30 | #define ESP_DMA_CMD 0x10 |
| 31 | #define ESP_DMA_STC 0x11 |
| 32 | #define ESP_DMA_SPA 0x12 |
| 33 | #define ESP_DMA_WBC 0x13 |
| 34 | #define ESP_DMA_WAC 0x14 |
| 35 | #define ESP_DMA_STATUS 0x15 |
| 36 | #define ESP_DMA_SMDLA 0x16 |
| 37 | #define ESP_DMA_WMAC 0x17 |
| 38 | |
| 39 | #define ESP_DMA_CMD_IDLE 0x00 |
| 40 | #define ESP_DMA_CMD_BLAST 0x01 |
| 41 | #define ESP_DMA_CMD_ABORT 0x02 |
| 42 | #define ESP_DMA_CMD_START 0x03 |
| 43 | #define ESP_DMA_CMD_MASK 0x03 |
| 44 | #define ESP_DMA_CMD_DIAG 0x04 |
| 45 | #define ESP_DMA_CMD_MDL 0x10 |
| 46 | #define ESP_DMA_CMD_INTE_P 0x20 |
| 47 | #define ESP_DMA_CMD_INTE_D 0x40 |
| 48 | #define ESP_DMA_CMD_DIR 0x80 |
| 49 | |
| 50 | #define ESP_DMA_STAT_PWDN 0x01 |
| 51 | #define ESP_DMA_STAT_ERROR 0x02 |
| 52 | #define ESP_DMA_STAT_ABORT 0x04 |
| 53 | #define ESP_DMA_STAT_DONE 0x08 |
| 54 | #define ESP_DMA_STAT_SCSIINT 0x10 |
| 55 | #define ESP_DMA_STAT_BCMPLT 0x20 |
| 56 | |
| 57 | /* EEPROM is accessed with 16-bit values */ |
| 58 | #define DC390_EEPROM_READ 0x80 |
| 59 | #define DC390_EEPROM_LEN 0x40 |
| 60 | |
| 61 | /* |
| 62 | * DC390 EEPROM |
| 63 | * |
| 64 | * 8 * 4 bytes of per-device options |
| 65 | * followed by HBA specific options |
| 66 | */ |
| 67 | |
| 68 | /* Per-device options */ |
| 69 | #define DC390_EE_MODE1 0x00 |
| 70 | #define DC390_EE_SPEED 0x01 |
| 71 | |
| 72 | /* HBA-specific options */ |
| 73 | #define DC390_EE_ADAPT_SCSI_ID 0x40 |
| 74 | #define DC390_EE_MODE2 0x41 |
| 75 | #define DC390_EE_DELAY 0x42 |
| 76 | #define DC390_EE_TAG_CMD_NUM 0x43 |
| 77 | |
| 78 | #define DC390_EE_MODE1_PARITY_CHK 0x01 |
| 79 | #define DC390_EE_MODE1_SYNC_NEGO 0x02 |
| 80 | #define DC390_EE_MODE1_EN_DISC 0x04 |
| 81 | #define DC390_EE_MODE1_SEND_START 0x08 |
| 82 | #define DC390_EE_MODE1_TCQ 0x10 |
| 83 | |
| 84 | #define DC390_EE_MODE2_MORE_2DRV 0x01 |
| 85 | #define DC390_EE_MODE2_GREATER_1G 0x02 |
| 86 | #define DC390_EE_MODE2_RST_SCSI_BUS 0x04 |
| 87 | #define DC390_EE_MODE2_ACTIVE_NEGATION 0x08 |
| 88 | #define DC390_EE_MODE2_NO_SEEK 0x10 |
| 89 | #define DC390_EE_MODE2_LUN_CHECK 0x20 |
| 90 | |
| 91 | struct pci_esp_priv { |
| 92 | struct esp *esp; |
| 93 | u8 dma_status; |
| 94 | }; |
| 95 | |
| 96 | static void pci_esp_dma_drain(struct esp *esp); |
| 97 | |
| 98 | static inline struct pci_esp_priv *pci_esp_get_priv(struct esp *esp) |
| 99 | { |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 100 | return dev_get_drvdata(esp->dev); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 101 | } |
| 102 | |
| 103 | static void pci_esp_write8(struct esp *esp, u8 val, unsigned long reg) |
| 104 | { |
| 105 | iowrite8(val, esp->regs + (reg * 4UL)); |
| 106 | } |
| 107 | |
| 108 | static u8 pci_esp_read8(struct esp *esp, unsigned long reg) |
| 109 | { |
| 110 | return ioread8(esp->regs + (reg * 4UL)); |
| 111 | } |
| 112 | |
| 113 | static void pci_esp_write32(struct esp *esp, u32 val, unsigned long reg) |
| 114 | { |
| 115 | return iowrite32(val, esp->regs + (reg * 4UL)); |
| 116 | } |
| 117 | |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 118 | static int pci_esp_irq_pending(struct esp *esp) |
| 119 | { |
| 120 | struct pci_esp_priv *pep = pci_esp_get_priv(esp); |
| 121 | |
| 122 | pep->dma_status = pci_esp_read8(esp, ESP_DMA_STATUS); |
| 123 | esp_dma_log("dma intr dreg[%02x]\n", pep->dma_status); |
| 124 | |
| 125 | if (pep->dma_status & (ESP_DMA_STAT_ERROR | |
| 126 | ESP_DMA_STAT_ABORT | |
| 127 | ESP_DMA_STAT_DONE | |
| 128 | ESP_DMA_STAT_SCSIINT)) |
| 129 | return 1; |
| 130 | |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | static void pci_esp_reset_dma(struct esp *esp) |
| 135 | { |
| 136 | /* Nothing to do ? */ |
| 137 | } |
| 138 | |
| 139 | static void pci_esp_dma_drain(struct esp *esp) |
| 140 | { |
| 141 | u8 resid; |
| 142 | int lim = 1000; |
| 143 | |
| 144 | |
| 145 | if ((esp->sreg & ESP_STAT_PMASK) == ESP_DOP || |
| 146 | (esp->sreg & ESP_STAT_PMASK) == ESP_DIP) |
| 147 | /* Data-In or Data-Out, nothing to be done */ |
| 148 | return; |
| 149 | |
| 150 | while (--lim > 0) { |
| 151 | resid = pci_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES; |
| 152 | if (resid <= 1) |
| 153 | break; |
| 154 | cpu_relax(); |
| 155 | } |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 156 | |
| 157 | /* |
| 158 | * When there is a residual BCMPLT will never be set |
| 159 | * (obviously). But we still have to issue the BLAST |
| 160 | * command, otherwise the data will not being transferred. |
| 161 | * But we'll never know when the BLAST operation is |
| 162 | * finished. So check for some time and give up eventually. |
| 163 | */ |
| 164 | lim = 1000; |
| 165 | pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_BLAST, ESP_DMA_CMD); |
| 166 | while (pci_esp_read8(esp, ESP_DMA_STATUS) & ESP_DMA_STAT_BCMPLT) { |
| 167 | if (--lim == 0) |
| 168 | break; |
| 169 | cpu_relax(); |
| 170 | } |
| 171 | pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_IDLE, ESP_DMA_CMD); |
| 172 | esp_dma_log("DMA blast done (%d tries, %d bytes left)\n", lim, resid); |
Hannes Reinecke | 6df388f | 2014-11-24 15:37:26 +0100 | [diff] [blame] | 173 | /* BLAST residual handling is currently untested */ |
| 174 | if (WARN_ON_ONCE(resid == 1)) { |
| 175 | struct esp_cmd_entry *ent = esp->active_cmd; |
| 176 | |
| 177 | ent->flags |= ESP_CMD_FLAG_RESIDUAL; |
| 178 | } |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 179 | } |
| 180 | |
| 181 | static void pci_esp_dma_invalidate(struct esp *esp) |
| 182 | { |
| 183 | struct pci_esp_priv *pep = pci_esp_get_priv(esp); |
| 184 | |
| 185 | esp_dma_log("invalidate DMA\n"); |
| 186 | |
| 187 | pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD); |
| 188 | pep->dma_status = 0; |
| 189 | } |
| 190 | |
| 191 | static int pci_esp_dma_error(struct esp *esp) |
| 192 | { |
| 193 | struct pci_esp_priv *pep = pci_esp_get_priv(esp); |
| 194 | |
| 195 | if (pep->dma_status & ESP_DMA_STAT_ERROR) { |
| 196 | u8 dma_cmd = pci_esp_read8(esp, ESP_DMA_CMD); |
| 197 | |
| 198 | if ((dma_cmd & ESP_DMA_CMD_MASK) == ESP_DMA_CMD_START) |
| 199 | pci_esp_write8(esp, ESP_DMA_CMD_ABORT, ESP_DMA_CMD); |
| 200 | |
| 201 | return 1; |
| 202 | } |
| 203 | if (pep->dma_status & ESP_DMA_STAT_ABORT) { |
| 204 | pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD); |
| 205 | pep->dma_status = pci_esp_read8(esp, ESP_DMA_CMD); |
| 206 | return 1; |
| 207 | } |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | static void pci_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, |
| 212 | u32 dma_count, int write, u8 cmd) |
| 213 | { |
| 214 | struct pci_esp_priv *pep = pci_esp_get_priv(esp); |
| 215 | u32 val = 0; |
| 216 | |
| 217 | BUG_ON(!(cmd & ESP_CMD_DMA)); |
| 218 | |
| 219 | pep->dma_status = 0; |
| 220 | |
| 221 | /* Set DMA engine to IDLE */ |
| 222 | if (write) |
| 223 | /* DMA write direction logic is inverted */ |
| 224 | val |= ESP_DMA_CMD_DIR; |
| 225 | pci_esp_write8(esp, ESP_DMA_CMD_IDLE | val, ESP_DMA_CMD); |
| 226 | |
| 227 | pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); |
| 228 | pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 229 | if (esp->config2 & ESP_CONFIG2_FENAB) |
| 230 | pci_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 231 | |
| 232 | pci_esp_write32(esp, esp_count, ESP_DMA_STC); |
| 233 | pci_esp_write32(esp, addr, ESP_DMA_SPA); |
| 234 | |
| 235 | esp_dma_log("start dma addr[%x] count[%d:%d]\n", |
| 236 | addr, esp_count, dma_count); |
| 237 | |
| 238 | scsi_esp_cmd(esp, cmd); |
| 239 | /* Send DMA Start command */ |
| 240 | pci_esp_write8(esp, ESP_DMA_CMD_START | val, ESP_DMA_CMD); |
| 241 | } |
| 242 | |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 243 | static u32 pci_esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len) |
| 244 | { |
| 245 | int dma_limit = 16; |
| 246 | u32 base, end; |
| 247 | |
| 248 | /* |
| 249 | * If CONFIG2_FENAB is set we can |
| 250 | * handle up to 24 bit addresses |
| 251 | */ |
| 252 | if (esp->config2 & ESP_CONFIG2_FENAB) |
| 253 | dma_limit = 24; |
| 254 | |
| 255 | if (dma_len > (1U << dma_limit)) |
| 256 | dma_len = (1U << dma_limit); |
| 257 | |
| 258 | /* |
| 259 | * Prevent crossing a 24-bit address boundary. |
| 260 | */ |
| 261 | base = dma_addr & ((1U << 24) - 1U); |
| 262 | end = base + dma_len; |
| 263 | if (end > (1U << 24)) |
| 264 | end = (1U <<24); |
| 265 | dma_len = end - base; |
| 266 | |
| 267 | return dma_len; |
| 268 | } |
| 269 | |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 270 | static const struct esp_driver_ops pci_esp_ops = { |
| 271 | .esp_write8 = pci_esp_write8, |
| 272 | .esp_read8 = pci_esp_read8, |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 273 | .irq_pending = pci_esp_irq_pending, |
| 274 | .reset_dma = pci_esp_reset_dma, |
| 275 | .dma_drain = pci_esp_dma_drain, |
| 276 | .dma_invalidate = pci_esp_dma_invalidate, |
| 277 | .send_dma_cmd = pci_esp_send_dma_cmd, |
| 278 | .dma_error = pci_esp_dma_error, |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 279 | .dma_length_limit = pci_esp_dma_length_limit, |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 280 | }; |
| 281 | |
| 282 | /* |
| 283 | * Read DC-390 eeprom |
| 284 | */ |
| 285 | static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd) |
| 286 | { |
| 287 | u8 carry_flag = 1, j = 0x80, bval; |
| 288 | int i; |
| 289 | |
| 290 | for (i = 0; i < 9; i++) { |
| 291 | if (carry_flag) { |
| 292 | pci_write_config_byte(pdev, 0x80, 0x40); |
| 293 | bval = 0xc0; |
| 294 | } else |
| 295 | bval = 0x80; |
| 296 | |
| 297 | udelay(160); |
| 298 | pci_write_config_byte(pdev, 0x80, bval); |
| 299 | udelay(160); |
| 300 | pci_write_config_byte(pdev, 0x80, 0); |
| 301 | udelay(160); |
| 302 | |
| 303 | carry_flag = (cmd & j) ? 1 : 0; |
| 304 | j >>= 1; |
| 305 | } |
| 306 | } |
| 307 | |
| 308 | static u16 dc390_eeprom_get_data(struct pci_dev *pdev) |
| 309 | { |
| 310 | int i; |
| 311 | u16 wval = 0; |
| 312 | u8 bval; |
| 313 | |
| 314 | for (i = 0; i < 16; i++) { |
| 315 | wval <<= 1; |
| 316 | |
| 317 | pci_write_config_byte(pdev, 0x80, 0x80); |
| 318 | udelay(160); |
| 319 | pci_write_config_byte(pdev, 0x80, 0x40); |
| 320 | udelay(160); |
| 321 | pci_read_config_byte(pdev, 0x00, &bval); |
| 322 | |
| 323 | if (bval == 0x22) |
| 324 | wval |= 1; |
| 325 | } |
| 326 | |
| 327 | return wval; |
| 328 | } |
| 329 | |
| 330 | static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr) |
| 331 | { |
| 332 | u8 cmd = DC390_EEPROM_READ, i; |
| 333 | |
| 334 | for (i = 0; i < DC390_EEPROM_LEN; i++) { |
| 335 | pci_write_config_byte(pdev, 0xc0, 0); |
| 336 | udelay(160); |
| 337 | |
| 338 | dc390_eeprom_prepare_read(pdev, cmd++); |
| 339 | *ptr++ = dc390_eeprom_get_data(pdev); |
| 340 | |
| 341 | pci_write_config_byte(pdev, 0x80, 0); |
| 342 | pci_write_config_byte(pdev, 0x80, 0); |
| 343 | udelay(160); |
| 344 | } |
| 345 | } |
| 346 | |
| 347 | static void dc390_check_eeprom(struct esp *esp) |
| 348 | { |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 349 | struct pci_dev *pdev = to_pci_dev(esp->dev); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 350 | u8 EEbuf[128]; |
| 351 | u16 *ptr = (u16 *)EEbuf, wval = 0; |
| 352 | int i; |
| 353 | |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 354 | dc390_read_eeprom(pdev, ptr); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 355 | |
| 356 | for (i = 0; i < DC390_EEPROM_LEN; i++, ptr++) |
| 357 | wval += *ptr; |
| 358 | |
| 359 | /* no Tekram EEprom found */ |
| 360 | if (wval != 0x1234) { |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 361 | dev_printk(KERN_INFO, &pdev->dev, |
| 362 | "No valid Tekram EEprom found\n"); |
| 363 | return; |
| 364 | } |
| 365 | esp->scsi_id = EEbuf[DC390_EE_ADAPT_SCSI_ID]; |
| 366 | esp->num_tags = 2 << EEbuf[DC390_EE_TAG_CMD_NUM]; |
Hannes Reinecke | eeea2f9 | 2014-11-24 15:37:27 +0100 | [diff] [blame] | 367 | if (EEbuf[DC390_EE_MODE2] & DC390_EE_MODE2_ACTIVE_NEGATION) |
| 368 | esp->config4 |= ESP_CONFIG4_RADE | ESP_CONFIG4_RAE; |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 369 | } |
| 370 | |
| 371 | static int pci_esp_probe_one(struct pci_dev *pdev, |
| 372 | const struct pci_device_id *id) |
| 373 | { |
| 374 | struct scsi_host_template *hostt = &scsi_esp_template; |
| 375 | int err = -ENODEV; |
| 376 | struct Scsi_Host *shost; |
| 377 | struct esp *esp; |
| 378 | struct pci_esp_priv *pep; |
| 379 | |
| 380 | if (pci_enable_device(pdev)) { |
| 381 | dev_printk(KERN_INFO, &pdev->dev, "cannot enable device\n"); |
| 382 | return -ENODEV; |
| 383 | } |
| 384 | |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 385 | if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 386 | dev_printk(KERN_INFO, &pdev->dev, |
| 387 | "failed to set 32bit DMA mask\n"); |
| 388 | goto fail_disable_device; |
| 389 | } |
| 390 | |
| 391 | shost = scsi_host_alloc(hostt, sizeof(struct esp)); |
| 392 | if (!shost) { |
| 393 | dev_printk(KERN_INFO, &pdev->dev, |
| 394 | "failed to allocate scsi host\n"); |
| 395 | err = -ENOMEM; |
| 396 | goto fail_disable_device; |
| 397 | } |
| 398 | |
| 399 | pep = kzalloc(sizeof(struct pci_esp_priv), GFP_KERNEL); |
| 400 | if (!pep) { |
| 401 | dev_printk(KERN_INFO, &pdev->dev, |
| 402 | "failed to allocate esp_priv\n"); |
| 403 | err = -ENOMEM; |
| 404 | goto fail_host_alloc; |
| 405 | } |
| 406 | |
| 407 | esp = shost_priv(shost); |
| 408 | esp->host = shost; |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 409 | esp->dev = &pdev->dev; |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 410 | esp->ops = &pci_esp_ops; |
| 411 | /* |
| 412 | * The am53c974 HBA has a design flaw of generating |
| 413 | * spurious DMA completion interrupts when using |
| 414 | * DMA for command submission. |
| 415 | */ |
| 416 | esp->flags |= ESP_FLAG_USE_FIFO; |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 417 | /* |
| 418 | * Enable CONFIG2_FENAB to allow for large DMA transfers |
| 419 | */ |
| 420 | if (am53c974_fenab) |
| 421 | esp->config2 |= ESP_CONFIG2_FENAB; |
| 422 | |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 423 | pep->esp = esp; |
| 424 | |
| 425 | if (pci_request_regions(pdev, DRV_MODULE_NAME)) { |
| 426 | dev_printk(KERN_ERR, &pdev->dev, |
| 427 | "pci memory selection failed\n"); |
| 428 | goto fail_priv_alloc; |
| 429 | } |
| 430 | |
| 431 | esp->regs = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); |
| 432 | if (!esp->regs) { |
| 433 | dev_printk(KERN_ERR, &pdev->dev, "pci I/O map failed\n"); |
| 434 | err = -EINVAL; |
| 435 | goto fail_release_regions; |
| 436 | } |
| 437 | esp->dma_regs = esp->regs; |
| 438 | |
| 439 | pci_set_master(pdev); |
| 440 | |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 441 | esp->command_block = dma_alloc_coherent(&pdev->dev, 16, |
| 442 | &esp->command_block_dma, GFP_KERNEL); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 443 | if (!esp->command_block) { |
| 444 | dev_printk(KERN_ERR, &pdev->dev, |
| 445 | "failed to allocate command block\n"); |
| 446 | err = -ENOMEM; |
| 447 | goto fail_unmap_regs; |
| 448 | } |
| 449 | |
Hannes Reinecke | 8041708 | 2015-03-27 14:31:12 +0100 | [diff] [blame] | 450 | pci_set_drvdata(pdev, pep); |
| 451 | |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 452 | err = request_irq(pdev->irq, scsi_esp_intr, IRQF_SHARED, |
| 453 | DRV_MODULE_NAME, esp); |
| 454 | if (err < 0) { |
| 455 | dev_printk(KERN_ERR, &pdev->dev, "failed to register IRQ\n"); |
| 456 | goto fail_unmap_command_block; |
| 457 | } |
| 458 | |
| 459 | esp->scsi_id = 7; |
| 460 | dc390_check_eeprom(esp); |
| 461 | |
| 462 | shost->this_id = esp->scsi_id; |
| 463 | shost->max_id = 8; |
| 464 | shost->irq = pdev->irq; |
| 465 | shost->io_port = pci_resource_start(pdev, 0); |
| 466 | shost->n_io_port = pci_resource_len(pdev, 0); |
| 467 | shost->unique_id = shost->io_port; |
| 468 | esp->scsi_id_mask = (1 << esp->scsi_id); |
| 469 | /* Assume 40MHz clock */ |
| 470 | esp->cfreq = 40000000; |
| 471 | |
Christoph Hellwig | 44b1b4d | 2018-10-13 09:26:26 +0200 | [diff] [blame] | 472 | err = scsi_esp_register(esp); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 473 | if (err) |
| 474 | goto fail_free_irq; |
| 475 | |
| 476 | return 0; |
| 477 | |
| 478 | fail_free_irq: |
| 479 | free_irq(pdev->irq, esp); |
| 480 | fail_unmap_command_block: |
Hannes Reinecke | 8041708 | 2015-03-27 14:31:12 +0100 | [diff] [blame] | 481 | pci_set_drvdata(pdev, NULL); |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 482 | dma_free_coherent(&pdev->dev, 16, esp->command_block, |
| 483 | esp->command_block_dma); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 484 | fail_unmap_regs: |
| 485 | pci_iounmap(pdev, esp->regs); |
| 486 | fail_release_regions: |
| 487 | pci_release_regions(pdev); |
| 488 | fail_priv_alloc: |
| 489 | kfree(pep); |
| 490 | fail_host_alloc: |
| 491 | scsi_host_put(shost); |
| 492 | fail_disable_device: |
| 493 | pci_disable_device(pdev); |
| 494 | |
| 495 | return err; |
| 496 | } |
| 497 | |
| 498 | static void pci_esp_remove_one(struct pci_dev *pdev) |
| 499 | { |
| 500 | struct pci_esp_priv *pep = pci_get_drvdata(pdev); |
| 501 | struct esp *esp = pep->esp; |
| 502 | |
| 503 | scsi_esp_unregister(esp); |
| 504 | free_irq(pdev->irq, esp); |
Hannes Reinecke | 8041708 | 2015-03-27 14:31:12 +0100 | [diff] [blame] | 505 | pci_set_drvdata(pdev, NULL); |
Christoph Hellwig | d47b3bd | 2018-10-13 09:26:23 +0200 | [diff] [blame] | 506 | dma_free_coherent(&pdev->dev, 16, esp->command_block, |
| 507 | esp->command_block_dma); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 508 | pci_iounmap(pdev, esp->regs); |
| 509 | pci_release_regions(pdev); |
| 510 | pci_disable_device(pdev); |
| 511 | kfree(pep); |
| 512 | |
| 513 | scsi_host_put(esp->host); |
| 514 | } |
| 515 | |
| 516 | static struct pci_device_id am53c974_pci_tbl[] = { |
| 517 | { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SCSI, |
| 518 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| 519 | { } |
| 520 | }; |
| 521 | MODULE_DEVICE_TABLE(pci, am53c974_pci_tbl); |
| 522 | |
| 523 | static struct pci_driver am53c974_driver = { |
| 524 | .name = DRV_MODULE_NAME, |
| 525 | .id_table = am53c974_pci_tbl, |
| 526 | .probe = pci_esp_probe_one, |
| 527 | .remove = pci_esp_remove_one, |
| 528 | }; |
| 529 | |
YueHaibing | 5f1c721 | 2018-04-21 18:58:33 +0800 | [diff] [blame] | 530 | module_pci_driver(am53c974_driver); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 531 | |
| 532 | MODULE_DESCRIPTION("AM53C974 SCSI driver"); |
| 533 | MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>"); |
| 534 | MODULE_LICENSE("GPL"); |
| 535 | MODULE_VERSION(DRV_MODULE_VERSION); |
Hannes Reinecke | 71bd849 | 2014-11-24 15:37:30 +0100 | [diff] [blame] | 536 | MODULE_ALIAS("tmscsim"); |
Hannes Reinecke | 3a7e7be | 2014-11-24 15:37:25 +0100 | [diff] [blame] | 537 | |
| 538 | module_param(am53c974_debug, bool, 0644); |
| 539 | MODULE_PARM_DESC(am53c974_debug, "Enable debugging"); |
| 540 | |
Hannes Reinecke | e858d93 | 2014-11-24 15:37:29 +0100 | [diff] [blame] | 541 | module_param(am53c974_fenab, bool, 0444); |
| 542 | MODULE_PARM_DESC(am53c974_fenab, "Enable 24-bit DMA transfer sizes"); |