blob: 45fe125823a8d41700efaaf2566c2d9c09b700f1 [file] [log] [blame]
Greg Kroah-Hartmanb2441312017-11-01 15:07:57 +01001// SPDX-License-Identifier: GPL-2.0
Linus Walleij49cec4d2017-01-22 13:18:44 +01002/*
Linus Walleij9d3a15a2017-03-13 00:28:16 +01003 * Faraday Technolog FTGPIO010 gpiochip and interrupt routines
Linus Walleij49cec4d2017-01-22 13:18:44 +01004 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
5 *
6 * Based on arch/arm/mach-gemini/gpio.c:
7 * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
8 *
9 * Based on plat-mxc/gpio.c:
10 * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
11 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
12 */
13#include <linux/gpio/driver.h>
14#include <linux/io.h>
15#include <linux/interrupt.h>
16#include <linux/platform_device.h>
Linus Walleij49cec4d2017-01-22 13:18:44 +010017#include <linux/bitops.h>
Linus Walleijda02d792018-08-27 22:15:40 +020018#include <linux/clk.h>
Linus Walleij49cec4d2017-01-22 13:18:44 +010019
20/* GPIO registers definition */
21#define GPIO_DATA_OUT 0x00
22#define GPIO_DATA_IN 0x04
23#define GPIO_DIR 0x08
Linus Walleij69a87f22018-02-12 22:40:23 +010024#define GPIO_BYPASS_IN 0x0C
Linus Walleij49cec4d2017-01-22 13:18:44 +010025#define GPIO_DATA_SET 0x10
26#define GPIO_DATA_CLR 0x14
27#define GPIO_PULL_EN 0x18
28#define GPIO_PULL_TYPE 0x1C
29#define GPIO_INT_EN 0x20
Linus Walleij69a87f22018-02-12 22:40:23 +010030#define GPIO_INT_STAT_RAW 0x24
31#define GPIO_INT_STAT_MASKED 0x28
Linus Walleij49cec4d2017-01-22 13:18:44 +010032#define GPIO_INT_MASK 0x2C
33#define GPIO_INT_CLR 0x30
34#define GPIO_INT_TYPE 0x34
35#define GPIO_INT_BOTH_EDGE 0x38
36#define GPIO_INT_LEVEL 0x3C
37#define GPIO_DEBOUNCE_EN 0x40
38#define GPIO_DEBOUNCE_PRESCALE 0x44
39
40/**
Linus Walleij9d3a15a2017-03-13 00:28:16 +010041 * struct ftgpio_gpio - Gemini GPIO state container
Linus Walleij49cec4d2017-01-22 13:18:44 +010042 * @dev: containing device for this instance
43 * @gc: gpiochip for this instance
Linus Walleijaf394592019-02-23 01:50:48 +010044 * @irq: irqchip for this instance
Linus Walleijda02d792018-08-27 22:15:40 +020045 * @base: remapped I/O-memory base
46 * @clk: silicon clock
Linus Walleij49cec4d2017-01-22 13:18:44 +010047 */
Linus Walleij9d3a15a2017-03-13 00:28:16 +010048struct ftgpio_gpio {
Linus Walleij49cec4d2017-01-22 13:18:44 +010049 struct device *dev;
50 struct gpio_chip gc;
Linus Walleijaf394592019-02-23 01:50:48 +010051 struct irq_chip irq;
Linus Walleij49cec4d2017-01-22 13:18:44 +010052 void __iomem *base;
Linus Walleijda02d792018-08-27 22:15:40 +020053 struct clk *clk;
Linus Walleij49cec4d2017-01-22 13:18:44 +010054};
55
Linus Walleij9d3a15a2017-03-13 00:28:16 +010056static void ftgpio_gpio_ack_irq(struct irq_data *d)
Linus Walleij49cec4d2017-01-22 13:18:44 +010057{
58 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
Linus Walleij9d3a15a2017-03-13 00:28:16 +010059 struct ftgpio_gpio *g = gpiochip_get_data(gc);
Linus Walleij49cec4d2017-01-22 13:18:44 +010060
61 writel(BIT(irqd_to_hwirq(d)), g->base + GPIO_INT_CLR);
62}
63
Linus Walleij9d3a15a2017-03-13 00:28:16 +010064static void ftgpio_gpio_mask_irq(struct irq_data *d)
Linus Walleij49cec4d2017-01-22 13:18:44 +010065{
66 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
Linus Walleij9d3a15a2017-03-13 00:28:16 +010067 struct ftgpio_gpio *g = gpiochip_get_data(gc);
Linus Walleij49cec4d2017-01-22 13:18:44 +010068 u32 val;
69
70 val = readl(g->base + GPIO_INT_EN);
71 val &= ~BIT(irqd_to_hwirq(d));
72 writel(val, g->base + GPIO_INT_EN);
73}
74
Linus Walleij9d3a15a2017-03-13 00:28:16 +010075static void ftgpio_gpio_unmask_irq(struct irq_data *d)
Linus Walleij49cec4d2017-01-22 13:18:44 +010076{
77 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
Linus Walleij9d3a15a2017-03-13 00:28:16 +010078 struct ftgpio_gpio *g = gpiochip_get_data(gc);
Linus Walleij49cec4d2017-01-22 13:18:44 +010079 u32 val;
80
81 val = readl(g->base + GPIO_INT_EN);
82 val |= BIT(irqd_to_hwirq(d));
83 writel(val, g->base + GPIO_INT_EN);
84}
85
Linus Walleij9d3a15a2017-03-13 00:28:16 +010086static int ftgpio_gpio_set_irq_type(struct irq_data *d, unsigned int type)
Linus Walleij49cec4d2017-01-22 13:18:44 +010087{
88 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
Linus Walleij9d3a15a2017-03-13 00:28:16 +010089 struct ftgpio_gpio *g = gpiochip_get_data(gc);
Linus Walleij49cec4d2017-01-22 13:18:44 +010090 u32 mask = BIT(irqd_to_hwirq(d));
91 u32 reg_both, reg_level, reg_type;
92
93 reg_type = readl(g->base + GPIO_INT_TYPE);
94 reg_level = readl(g->base + GPIO_INT_LEVEL);
95 reg_both = readl(g->base + GPIO_INT_BOTH_EDGE);
96
97 switch (type) {
98 case IRQ_TYPE_EDGE_BOTH:
99 irq_set_handler_locked(d, handle_edge_irq);
100 reg_type &= ~mask;
101 reg_both |= mask;
102 break;
103 case IRQ_TYPE_EDGE_RISING:
104 irq_set_handler_locked(d, handle_edge_irq);
105 reg_type &= ~mask;
106 reg_both &= ~mask;
107 reg_level &= ~mask;
108 break;
109 case IRQ_TYPE_EDGE_FALLING:
110 irq_set_handler_locked(d, handle_edge_irq);
111 reg_type &= ~mask;
112 reg_both &= ~mask;
113 reg_level |= mask;
114 break;
115 case IRQ_TYPE_LEVEL_HIGH:
116 irq_set_handler_locked(d, handle_level_irq);
117 reg_type |= mask;
118 reg_level &= ~mask;
119 break;
120 case IRQ_TYPE_LEVEL_LOW:
121 irq_set_handler_locked(d, handle_level_irq);
122 reg_type |= mask;
123 reg_level |= mask;
124 break;
125 default:
126 irq_set_handler_locked(d, handle_bad_irq);
127 return -EINVAL;
128 }
129
130 writel(reg_type, g->base + GPIO_INT_TYPE);
131 writel(reg_level, g->base + GPIO_INT_LEVEL);
132 writel(reg_both, g->base + GPIO_INT_BOTH_EDGE);
133
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100134 ftgpio_gpio_ack_irq(d);
Linus Walleij49cec4d2017-01-22 13:18:44 +0100135
136 return 0;
137}
138
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100139static void ftgpio_gpio_irq_handler(struct irq_desc *desc)
Linus Walleij49cec4d2017-01-22 13:18:44 +0100140{
141 struct gpio_chip *gc = irq_desc_get_handler_data(desc);
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100142 struct ftgpio_gpio *g = gpiochip_get_data(gc);
Linus Walleij49cec4d2017-01-22 13:18:44 +0100143 struct irq_chip *irqchip = irq_desc_get_chip(desc);
144 int offset;
145 unsigned long stat;
146
147 chained_irq_enter(irqchip, desc);
148
Linus Walleij69a87f22018-02-12 22:40:23 +0100149 stat = readl(g->base + GPIO_INT_STAT_RAW);
Linus Walleij49cec4d2017-01-22 13:18:44 +0100150 if (stat)
151 for_each_set_bit(offset, &stat, gc->ngpio)
Thierry Redingf0fbe7b2017-11-07 19:15:47 +0100152 generic_handle_irq(irq_find_mapping(gc->irq.domain,
Linus Walleij49cec4d2017-01-22 13:18:44 +0100153 offset));
154
155 chained_irq_exit(irqchip, desc);
156}
157
Linus Walleij36f3f192018-08-27 22:15:51 +0200158static int ftgpio_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
159 unsigned long config)
160{
161 enum pin_config_param param = pinconf_to_config_param(config);
162 u32 arg = pinconf_to_config_argument(config);
163 struct ftgpio_gpio *g = gpiochip_get_data(gc);
164 unsigned long pclk_freq;
165 u32 deb_div;
166 u32 val;
167
168 if (param != PIN_CONFIG_INPUT_DEBOUNCE)
169 return -ENOTSUPP;
170
171 /*
172 * Debounce only works if interrupts are enabled. The manual
173 * states that if PCLK is 66 MHz, and this is set to 0x7D0, then
174 * PCLK is divided down to 33 kHz for the debounce timer. 0x7D0 is
175 * 2000 decimal, so what they mean is simply that the PCLK is
176 * divided by this value.
177 *
178 * As we get a debounce setting in microseconds, we calculate the
179 * desired period time and see if we can get a suitable debounce
180 * time.
181 */
182 pclk_freq = clk_get_rate(g->clk);
183 deb_div = DIV_ROUND_CLOSEST(pclk_freq, arg);
184
185 /* This register is only 24 bits wide */
186 if (deb_div > (1 << 24))
187 return -ENOTSUPP;
188
189 dev_dbg(g->dev, "prescale divisor: %08x, resulting frequency %lu Hz\n",
190 deb_div, (pclk_freq/deb_div));
191
192 val = readl(g->base + GPIO_DEBOUNCE_PRESCALE);
193 if (val == deb_div) {
194 /*
195 * The debounce timer happens to already be set to the
196 * desireable value, what a coincidence! We can just enable
197 * debounce on this GPIO line and return. This happens more
198 * often than you think, for example when all GPIO keys
199 * on a system are requesting the same debounce interval.
200 */
201 val = readl(g->base + GPIO_DEBOUNCE_EN);
202 val |= BIT(offset);
203 writel(val, g->base + GPIO_DEBOUNCE_EN);
204 return 0;
205 }
206
207 val = readl(g->base + GPIO_DEBOUNCE_EN);
208 if (val) {
209 /*
210 * Oh no! Someone is already using the debounce with
211 * another setting than what we need. Bummer.
212 */
213 return -ENOTSUPP;
214 }
215
216 /* First come, first serve */
217 writel(deb_div, g->base + GPIO_DEBOUNCE_PRESCALE);
218 /* Enable debounce */
219 val |= BIT(offset);
220 writel(val, g->base + GPIO_DEBOUNCE_EN);
221
222 return 0;
223}
224
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100225static int ftgpio_gpio_probe(struct platform_device *pdev)
Linus Walleij49cec4d2017-01-22 13:18:44 +0100226{
227 struct device *dev = &pdev->dev;
228 struct resource *res;
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100229 struct ftgpio_gpio *g;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100230 int irq;
231 int ret;
232
233 g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
234 if (!g)
235 return -ENOMEM;
236
237 g->dev = dev;
238
239 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
240 g->base = devm_ioremap_resource(dev, res);
241 if (IS_ERR(g->base))
242 return PTR_ERR(g->base);
243
244 irq = platform_get_irq(pdev, 0);
Arvind Yadav4070a532017-12-02 22:31:01 +0530245 if (irq <= 0)
246 return irq ? irq : -EINVAL;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100247
Linus Walleijda02d792018-08-27 22:15:40 +0200248 g->clk = devm_clk_get(dev, NULL);
249 if (!IS_ERR(g->clk)) {
250 ret = clk_prepare_enable(g->clk);
251 if (ret)
252 return ret;
253 } else if (PTR_ERR(g->clk) == -EPROBE_DEFER) {
254 /*
255 * Percolate deferrals, for anything else,
256 * just live without the clocking.
257 */
258 return PTR_ERR(g->clk);
259 }
260
Linus Walleij49cec4d2017-01-22 13:18:44 +0100261 ret = bgpio_init(&g->gc, dev, 4,
262 g->base + GPIO_DATA_IN,
263 g->base + GPIO_DATA_SET,
264 g->base + GPIO_DATA_CLR,
265 g->base + GPIO_DIR,
266 NULL,
267 0);
268 if (ret) {
269 dev_err(dev, "unable to init generic GPIO\n");
Linus Walleijda02d792018-08-27 22:15:40 +0200270 goto dis_clk;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100271 }
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100272 g->gc.label = "FTGPIO010";
Linus Walleij49cec4d2017-01-22 13:18:44 +0100273 g->gc.base = -1;
274 g->gc.parent = dev;
275 g->gc.owner = THIS_MODULE;
276 /* ngpio is set by bgpio_init() */
277
Linus Walleij36f3f192018-08-27 22:15:51 +0200278 /* We need a silicon clock to do debounce */
279 if (!IS_ERR(g->clk))
280 g->gc.set_config = ftgpio_gpio_set_config;
281
Linus Walleij49cec4d2017-01-22 13:18:44 +0100282 ret = devm_gpiochip_add_data(dev, &g->gc, g);
283 if (ret)
Linus Walleijda02d792018-08-27 22:15:40 +0200284 goto dis_clk;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100285
286 /* Disable, unmask and clear all interrupts */
287 writel(0x0, g->base + GPIO_INT_EN);
288 writel(0x0, g->base + GPIO_INT_MASK);
289 writel(~0x0, g->base + GPIO_INT_CLR);
290
Linus Walleij36f3f192018-08-27 22:15:51 +0200291 /* Clear any use of debounce */
292 writel(0x0, g->base + GPIO_DEBOUNCE_EN);
293
Linus Walleijaf394592019-02-23 01:50:48 +0100294 g->irq.name = "FTGPIO010";
295 g->irq.irq_ack = ftgpio_gpio_ack_irq;
296 g->irq.irq_mask = ftgpio_gpio_mask_irq;
297 g->irq.irq_unmask = ftgpio_gpio_unmask_irq;
298 g->irq.irq_set_type = ftgpio_gpio_set_irq_type;
299
300 ret = gpiochip_irqchip_add(&g->gc, &g->irq,
Linus Walleij49cec4d2017-01-22 13:18:44 +0100301 0, handle_bad_irq,
302 IRQ_TYPE_NONE);
303 if (ret) {
304 dev_info(dev, "could not add irqchip\n");
Linus Walleijda02d792018-08-27 22:15:40 +0200305 goto dis_clk;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100306 }
Linus Walleijaf394592019-02-23 01:50:48 +0100307 gpiochip_set_chained_irqchip(&g->gc, &g->irq,
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100308 irq, ftgpio_gpio_irq_handler);
Linus Walleij49cec4d2017-01-22 13:18:44 +0100309
Linus Walleijda02d792018-08-27 22:15:40 +0200310 platform_set_drvdata(pdev, g);
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100311 dev_info(dev, "FTGPIO010 @%p registered\n", g->base);
Linus Walleij49cec4d2017-01-22 13:18:44 +0100312
313 return 0;
Linus Walleijda02d792018-08-27 22:15:40 +0200314
315dis_clk:
316 if (!IS_ERR(g->clk))
317 clk_disable_unprepare(g->clk);
318 return ret;
319}
320
321static int ftgpio_gpio_remove(struct platform_device *pdev)
322{
323 struct ftgpio_gpio *g = platform_get_drvdata(pdev);
324
325 if (!IS_ERR(g->clk))
326 clk_disable_unprepare(g->clk);
327 return 0;
Linus Walleij49cec4d2017-01-22 13:18:44 +0100328}
329
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100330static const struct of_device_id ftgpio_gpio_of_match[] = {
Linus Walleij49cec4d2017-01-22 13:18:44 +0100331 {
332 .compatible = "cortina,gemini-gpio",
333 },
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100334 {
335 .compatible = "moxa,moxart-gpio",
336 },
337 {
338 .compatible = "faraday,ftgpio010",
339 },
Linus Walleij49cec4d2017-01-22 13:18:44 +0100340 {},
341};
342
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100343static struct platform_driver ftgpio_gpio_driver = {
Linus Walleij49cec4d2017-01-22 13:18:44 +0100344 .driver = {
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100345 .name = "ftgpio010-gpio",
346 .of_match_table = of_match_ptr(ftgpio_gpio_of_match),
Linus Walleij49cec4d2017-01-22 13:18:44 +0100347 },
Linus Walleijda02d792018-08-27 22:15:40 +0200348 .probe = ftgpio_gpio_probe,
349 .remove = ftgpio_gpio_remove,
Linus Walleij49cec4d2017-01-22 13:18:44 +0100350};
Linus Walleij9d3a15a2017-03-13 00:28:16 +0100351builtin_platform_driver(ftgpio_gpio_driver);