Blame - drivers/regulator/Kconfig - SHIFTPHONES/android_kernel_shift_sdm845

blob: 11ee053419265e943b49b65071152df6113ca6bf [file] [log] [blame]

Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	2	bool "Voltage and Current Regulator Support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	help
				4	Generic Voltage and Current Regulator support.
				5
				6	This framework is designed to provide a generic interface to voltage
				7	and current regulators within the Linux kernel. It's intended to
				8	provide voltage and current control to client or consumer drivers and
				9	also provide status information to user space applications through a
				10	sysfs interface.
				11
				12	The intention is to allow systems to dynamically control regulator
				13	output in order to save power and prolong battery life. This applies
				14	to both voltage regulators (where voltage output is controllable) and
				15	current sinks (where current output is controllable).
				16
				17	This framework safely compiles out if not selected so that client
				18	drivers can still be used in systems with no software controllable
				19	regulators.
				20
				21	If unsure, say no.
				22
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	23
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	24	if REGULATOR
				25
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	26	config REGULATOR_DEBUG
				27	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	help
				29	Say yes here to enable debugging support.
				30
				31	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	32	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	33	help
				34	This driver provides support for fixed voltage regulators,
				35	useful for systems which use a combination of software
				36	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	37
				38	config REGULATOR_VIRTUAL_CONSUMER
				39	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	40	help
				41	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	42	current regulator API which provides sysfs controls for
				43	configuring the supplies requested. This is mainly useful
				44	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	45
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	46	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	48	config REGULATOR_USERSPACE_CONSUMER
				49	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	50	help
				51	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	52	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	53	control power supplies for such devices.
				54
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	55	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	56
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	57	config REGULATOR_88PM800
				58	tristate "Marvell 88PM800 Power regulators"
Axel Lin	7c45f60	2013-07-19 09:17:53 +0800	[diff] [blame]	59	depends on MFD_88PM800
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	60	help
				61	This driver supports Marvell 88PM800 voltage regulator chips.
				62	It delivers digitally programmable output,
				63	the voltage is programmed via I2C interface.
				64	It's suitable to support PXA988 chips to control VCC_MAIN and
				65	various voltages.
				66
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	67	config REGULATOR_88PM8607
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	68	tristate "Marvell 88PM8607 Power regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	69	depends on MFD_88PM860X=y
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	70	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	71	This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	72
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	73	config REGULATOR_AD5398
				74	tristate "Analog Devices AD5398/AD5821 regulators"
				75	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	76	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	77	This driver supports AD5398 and AD5821 current regulator chips.
				78	If building into module, its name is ad5398.ko.
				79
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	80	config REGULATOR_ANATOP
				81	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
				82	depends on MFD_SYSCON
				83	help
				84	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				85	regulators. It is recommended that this option be
				86	enabled on i.MX6 platform.
				87
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	88	config REGULATOR_AAT2870
				89	tristate "AnalogicTech AAT2870 Regulators"
				90	depends on MFD_AAT2870_CORE
				91	help
				92	If you have a AnalogicTech AAT2870 say Y to enable the
				93	regulator driver.
				94
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	95	config REGULATOR_AB3100
				96	tristate "ST-Ericsson AB3100 Regulator functions"
				97	depends on AB3100_CORE
				98	default y if AB3100_CORE
				99	help
				100	These regulators correspond to functionality in the
				101	AB3100 analog baseband dealing with power regulators
				102	for the system.
				103
				104	config REGULATOR_AB8500
				105	bool "ST-Ericsson AB8500 Power Regulators"
				106	depends on AB8500_CORE
				107	help
				108	This driver supports the regulators found on the ST-Ericsson mixed
				109	signal AB8500 PMIC
				110
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	111	config REGULATOR_ARIZONA
				112	tristate "Wolfson Arizona class devices"
				113	depends on MFD_ARIZONA
Mark Brown	e6ed905	2013-01-10 19:14:11 +0000	[diff] [blame]	114	depends on SND_SOC
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	115	help
				116	Support for the regulators found on Wolfson Arizona class
				117	devices.
				118
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	119	config REGULATOR_AS3711
				120	tristate "AS3711 PMIC"
				121	depends on MFD_AS3711
				122	help
				123	This driver provides support for the voltage regulators on the
				124	AS3711 PMIC
				125
Laxman Dewangan	bc40733	2013-09-20 18:00:13 +0530	[diff] [blame]	126	config REGULATOR_AS3722
				127	tristate "AMS AS3722 PMIC Regulators"
				128	depends on MFD_AS3722
				129	help
				130	This driver provides support for the voltage regulators on the
				131	AS3722 PMIC. This will enable support for all the software
				132	controllable DCDC/LDO regulators.
				133
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	134	config REGULATOR_DA903X
				135	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				136	depends on PMIC_DA903X
				137	help
				138	Say y here to support the BUCKs and LDOs regulators found on
				139	Dialog Semiconductor DA9030/DA9034 PMIC.
				140
				141	config REGULATOR_DA9052
				142	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				143	depends on PMIC_DA9052
				144	help
				145	This driver supports the voltage regulators of DA9052-BC and
				146	DA9053-AA/Bx PMIC.
				147
Ashish Jangam	f6130be	2012-11-01 13:57:56 +0530	[diff] [blame]	148	config REGULATOR_DA9055
				149	tristate "Dialog Semiconductor DA9055 regulators"
				150	depends on MFD_DA9055
				151	help
				152	Say y here to support the BUCKs and LDOs regulators found on
				153	Dialog Semiconductor DA9055 PMIC.
				154
				155	This driver can also be built as a module. If so, the module
				156	will be called da9055-regulator.
				157
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	158	config REGULATOR_DA9063
				159	tristate "Dialog Semiconductor DA9063 regulators"
				160	depends on MFD_DA9063
				161	help
				162	Say y here to support the BUCKs and LDOs regulators found on
				163	DA9063 PMICs.
				164
				165	This driver can also be built as a module. If so, the module
				166	will be called da9063-regulator.
				167
Steve Twiss	16f1091	2013-08-06 15:30:48 +0100	[diff] [blame]	168	config REGULATOR_DA9210
				169	tristate "Dialog Semiconductor DA9210 regulator"
				170	depends on I2C
				171	select REGMAP_I2C
				172	help
				173	Say y here to support for the Dialog Semiconductor DA9210.
				174	The DA9210 is a multi-phase synchronous step down
				175	converter 12A DC-DC Buck controlled through an I2C
				176	interface.
				177
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	178	config REGULATOR_DBX500_PRCMU
				179	bool
				180
				181	config REGULATOR_DB8500_PRCMU
				182	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				183	depends on MFD_DB8500_PRCMU
				184	select REGULATOR_DBX500_PRCMU
				185	help
				186	This driver supports the voltage domain regulators controlled by the
				187	DB8500 PRCMU
				188
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	189	config REGULATOR_FAN53555
				190	tristate "Fairchild FAN53555 Regulator"
				191	depends on I2C
				192	select REGMAP_I2C
				193	help
				194	This driver supports Fairchild FAN53555 Digitally Programmable
				195	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				196	regulator that delivers a digitally programmable output from an
				197	input voltage supply of 2.5V to 5.5V. The output voltage is
				198	programmed through an I2C interface.
				199
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	200	config REGULATOR_GPIO
				201	tristate "GPIO regulator support"
				202	depends on GPIOLIB
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	203	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	204	This driver provides support for regulators that can be
				205	controlled via gpios.
				206	It is capable of supporting current and voltage regulators
				207	and the platform has to provide a mapping of GPIO-states
				208	to target volts/amps.
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	209
				210	config REGULATOR_ISL6271A
				211	tristate "Intersil ISL6271A Power regulator"
				212	depends on I2C
				213	help
				214	This driver supports ISL6271A voltage regulator chip.
				215
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	216	config REGULATOR_LP3971
				217	tristate "National Semiconductors LP3971 PMIC regulator driver"
				218	depends on I2C
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	219	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	220	Say Y here to support the voltage regulators and convertors
				221	on National Semiconductors LP3971 PMIC
				222
				223	config REGULATOR_LP3972
				224	tristate "National Semiconductors LP3972 PMIC regulator driver"
				225	depends on I2C
				226	help
				227	Say Y here to support the voltage regulators and convertors
				228	on National Semiconductors LP3972 PMIC
				229
				230	config REGULATOR_LP872X
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	231	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin	613965f	2013-08-30 22:13:44 +0800	[diff] [blame]	232	depends on I2C
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	233	select REGMAP_I2C
				234	help
				235	This driver supports LP8720/LP8725 PMIC
				236
				237	config REGULATOR_LP8755
				238	tristate "TI LP8755 High Performance PMU driver"
				239	depends on I2C
				240	select REGMAP_I2C
				241	help
				242	This driver supports LP8755 High Performance PMU driver. This
				243	chip contains six step-down DC/DC converters which can support
				244	9 mode multiphase configuration.
				245
				246	config REGULATOR_LP8788
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	247	tristate "TI LP8788 Power Regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	248	depends on MFD_LP8788
				249	help
				250	This driver supports LP8788 voltage regulator chip.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	251
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame^]	252	config REGULATOR_MAX14577
				253	tristate "Maxim 14577 regulator"
				254	depends on MFD_MAX14577
				255	help
				256	This driver controls a Maxim 14577 regulator via I2C bus.
				257	The regulators include safeout LDO and current regulator 'CHARGER'.
				258
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	259	config REGULATOR_MAX1586
				260	tristate "Maxim 1586/1587 voltage regulator"
				261	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	262	help
				263	This driver controls a Maxim 1586 or 1587 voltage output
				264	regulator via I2C bus. The provided regulator is suitable
				265	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				266
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	267	config REGULATOR_MAX8649
				268	tristate "Maxim 8649 voltage regulator"
				269	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	270	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	271	help
				272	This driver controls a Maxim 8649 voltage output regulator via
				273	I2C bus.
				274
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	275	config REGULATOR_MAX8660
				276	tristate "Maxim 8660/8661 voltage regulator"
				277	depends on I2C
				278	help
				279	This driver controls a Maxim 8660/8661 voltage output
				280	regulator via I2C bus.
				281
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	282	config REGULATOR_MAX8907
				283	tristate "Maxim 8907 voltage regulator"
				284	depends on MFD_MAX8907
				285	help
				286	This driver controls a Maxim 8907 voltage output regulator
				287	via I2C bus. The provided regulator is suitable for Tegra
				288	chip to control Step-Down DC-DC and LDOs.
				289
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	290	config REGULATOR_MAX8925
				291	tristate "Maxim MAX8925 Power Management IC"
				292	depends on MFD_MAX8925
				293	help
				294	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
				295
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	296	config REGULATOR_MAX8952
				297	tristate "Maxim MAX8952 Power Management IC"
				298	depends on I2C
				299	help
				300	This driver controls a Maxim 8952 voltage output regulator
				301	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				302	modes ranging from 0.77V to 1.40V by 0.01V steps.
				303
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	304	config REGULATOR_MAX8973
				305	tristate "Maxim MAX8973 voltage regulator "
				306	depends on I2C
				307	select REGMAP_I2C
				308	help
				309	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
				310	switching regulator delievers up to 9A of output current. Each
				311	phase operates at a 2MHz fixed frequency with a 120 deg shift
				312	from the adjacent phase, allowing the use of small magnetic component.
				313
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	314	config REGULATOR_MAX8997
				315	tristate "Maxim 8997/8966 regulator"
				316	depends on MFD_MAX8997
				317	help
				318	This driver controls a Maxim 8997/8966 regulator
				319	via I2C bus. The provided regulator is suitable for S5PC110,
				320	S5PV210, and Exynos-4 chips to control VCC_CORE and
				321	VCC_USIM voltages.
				322
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	323	config REGULATOR_MAX8998
				324	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	325	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	326	help
				327	This driver controls a Maxim 8998 voltage output regulator
				328	via I2C bus. The provided regulator is suitable for S3C6410
				329	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				330
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	331	config REGULATOR_MAX77686
				332	tristate "Maxim 77686 regulator"
				333	depends on MFD_MAX77686
				334	help
				335	This driver controls a Maxim 77686 regulator
				336	via I2C bus. The provided regulator is suitable for
				337	Exynos-4 chips to control VARM and VINT voltages.
				338
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	339	config REGULATOR_MAX77693
				340	tristate "Maxim MAX77693 regulator"
				341	depends on MFD_MAX77693
				342	help
				343	This driver controls a Maxim 77693 regulator via I2C bus.
				344	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
				345	and one current regulator 'CHARGER'. This is suitable for
				346	Exynos-4x12 chips.
				347
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	348	config REGULATOR_MC13XXX_CORE
				349	tristate
				350
				351	config REGULATOR_MC13783
				352	tristate "Freescale MC13783 regulator driver"
				353	depends on MFD_MC13783
				354	select REGULATOR_MC13XXX_CORE
				355	help
				356	Say y here to support the regulators found on the Freescale MC13783
				357	PMIC.
				358
				359	config REGULATOR_MC13892
				360	tristate "Freescale MC13892 regulator driver"
				361	depends on MFD_MC13XXX
				362	select REGULATOR_MC13XXX_CORE
				363	help
				364	Say y here to support the regulators found on the Freescale MC13892
				365	PMIC.
				366
				367	config REGULATOR_PALMAS
				368	tristate "TI Palmas PMIC Regulators"
				369	depends on MFD_PALMAS
				370	help
				371	If you wish to control the regulators on the Palmas series of
				372	chips say Y here. This will enable support for all the software
				373	controllable SMPS/LDO regulators.
				374
				375	The regulators available on Palmas series chips vary depending
				376	on the muxing. This is handled automatically in the driver by
				377	reading the mux info from OTP.
				378
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	379	config REGULATOR_PCAP
				380	tristate "Motorola PCAP2 regulator driver"
				381	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	382	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	383	This driver provides support for the voltage regulators of the
				384	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	385
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	386	config REGULATOR_PCF50633
				387	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	388	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	389	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	390	Say Y here to support the voltage regulators and convertors
				391	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	392
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	393	config REGULATOR_PFUZE100
				394	tristate "Support regulators on Freescale PFUZE100 PMIC"
				395	depends on I2C
Axel Lin	94421b0	2013-07-29 12:08:01 +0800	[diff] [blame]	396	select REGMAP_I2C
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	397	help
				398	Say y here to support the regulators found on the Freescale PFUZE100
				399	PMIC.
				400
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	401	config REGULATOR_RC5T583
				402	tristate "RICOH RC5T583 Power regulators"
				403	depends on MFD_RC5T583
				404	help
				405	Select this option to enable the power regulator of RICOH
				406	PMIC RC5T583.
				407	This driver supports the control of different power rails of device
				408	through regulator interface. The device supports multiple DCDC/LDO
				409	outputs which can be controlled by i2c communication.
				410
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	411	config REGULATOR_S2MPS11
				412	tristate "Samsung S2MPS11 voltage regulator"
				413	depends on MFD_SEC_CORE
				414	help
				415	This driver supports a Samsung S2MPS11 voltage output regulator
				416	via I2C bus. S2MPS11 is comprised of high efficient Buck converters
				417	including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
				418
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	419	config REGULATOR_S5M8767
				420	tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim	66c9fbb	2012-07-11 21:06:40 +0900	[diff] [blame]	421	depends on MFD_SEC_CORE
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	422	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	423	This driver supports a Samsung S5M8767A voltage output regulator
				424	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				425	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	426
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	427	config REGULATOR_TI_ABB
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	428	tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	429	depends on ARCH_OMAP
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	430	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	431	Select this option to support Texas Instruments' on-chip Adaptive Body
				432	Bias (ABB) LDO regulators. It is recommended that this option be
				433	enabled on required TI SoC. Certain Operating Performance Points
				434	on TI SoCs may be unstable without enabling this as it provides
				435	device specific optimized bias to allow/optimize functionality.
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	436
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	437	config REGULATOR_STW481X_VMMC
				438	bool "ST Microelectronics STW481X VMMC regulator"
				439	depends on MFD_STW481X
				440	default y if MFD_STW481X
				441	help
				442	This driver supports the internal VMMC regulator in the STw481x
				443	PMIC chips.
				444
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	445	config REGULATOR_TPS51632
				446	tristate "TI TPS51632 Power Regulator"
				447	depends on I2C
				448	select REGMAP_I2C
				449	help
				450	This driver supports TPS51632 voltage regulator chip.
Axel Lin	7bde767	2012-11-01 14:02:36 +0800	[diff] [blame]	451	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	452	with Serial VID control and DVFS.
				453	The voltage output can be configure through I2C interface or PWM
				454	interface.
				455
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	456	config REGULATOR_TPS6105X
				457	tristate "TI TPS6105X Power regulators"
				458	depends on TPS6105X
				459	default y if TPS6105X
				460	help
				461	This driver supports TPS61050/TPS61052 voltage regulator chips.
				462	It is a single boost converter primarily for white LEDs and
				463	audio amplifiers.
				464
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	465	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	466	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	467	depends on I2C
				468	select REGMAP_I2C
				469	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	470	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	471	regulator is meant for processor core supply. This chip is
				472	high-frequency synchronous step down dc-dc converter optimized
				473	for battery-powered portable applications.
				474
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	475	config REGULATOR_TPS65023
				476	tristate "TI TPS65023 Power regulators"
				477	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	478	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	479	help
				480	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				481	three step-down converters and two general-purpose LDO voltage regulators.
				482	It supports TI's software based Class-2 SmartReflex implementation.
				483
				484	config REGULATOR_TPS6507X
				485	tristate "TI TPS6507X Power regulators"
				486	depends on I2C
				487	help
				488	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				489	three step-down converters and two general-purpose LDO voltage regulators.
				490	It supports TI's software based Class-2 SmartReflex implementation.
				491
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	492	config REGULATOR_TPS65090
				493	tristate "TI TPS65090 Power regulator"
				494	depends on MFD_TPS65090
				495	help
				496	This driver provides support for the voltage regulators on the
				497	TI TPS65090 PMIC.
				498
AnilKumar Ch	a493077	2012-01-11 16:11:49 +0530	[diff] [blame]	499	config REGULATOR_TPS65217
				500	tristate "TI TPS65217 Power regulators"
				501	depends on MFD_TPS65217
				502	help
				503	This driver supports TPS65217 voltage regulator chips. TPS65217
				504	provides three step-down converters and four general-purpose LDO
				505	voltage regulators. It supports software based voltage control
				506	for different voltage domains
				507
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	508	config REGULATOR_TPS6524X
				509	tristate "TI TPS6524X Power regulators"
				510	depends on SPI
				511	help
				512	This driver supports TPS6524X voltage regulator chips. TPS6524X
				513	provides three step-down converters and two general-purpose LDO
				514	voltage regulators. This device is interfaced using a customized
				515	serial interface currently supported on the sequencer serial
				516	port controller.
				517
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	518	config REGULATOR_TPS6586X
				519	tristate "TI TPS6586X Power regulators"
				520	depends on MFD_TPS6586X
				521	help
				522	This driver supports TPS6586X voltage regulator chips.
				523
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	524	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	525	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	526	depends on MFD_TPS65910
				527	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	528	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	529
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	530	config REGULATOR_TPS65912
				531	tristate "TI TPS65912 Power regulator"
				532	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	533	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	534	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	535
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	536	config REGULATOR_TPS80031
				537	tristate "TI TPS80031/TPS80032 power regualtor driver"
				538	depends on MFD_TPS80031
				539	help
				540	TPS80031/ TPS80032 Fully Integrated Power Management with Power
				541	Path and Battery Charger. It has 5 configurable step-down
				542	converters, 11 general purpose LDOs, VBUS generator and digital
				543	output to control regulators.
				544
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	545	config REGULATOR_TWL4030
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	546	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	547	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	548	help
				549	This driver supports the voltage regulators provided by
				550	this family of companion chips.
				551
Pawel Moll	31e5408	2012-09-24 18:56:54 +0100	[diff] [blame]	552	config REGULATOR_VEXPRESS
				553	tristate "Versatile Express regulators"
				554	depends on VEXPRESS_CONFIG
				555	help
				556	This driver provides support for voltage regulators available
				557	on the ARM Ltd's Versatile Express platform.
				558
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	559	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	560	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	561	depends on MFD_WM831X
				562	help
				563	Support the voltage and current regulators of the WM831x series
				564	of PMIC devices.
				565
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	566	config REGULATOR_WM8350
				567	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				568	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	569	help
				570	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	571	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	572
				573	config REGULATOR_WM8400
				574	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				575	depends on MFD_WM8400
				576	help
				577	This driver provides support for the voltage regulators of the
				578	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	579
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	580	config REGULATOR_WM8994
				581	tristate "Wolfson Microelectronics WM8994 CODEC"
				582	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	583	help
				584	This driver provides support for the voltage regulators on the
				585	WM8994 CODEC.
				586
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	587	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	588