Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / android_kernel_shift_sdm845 / 5928f5389664fffa295c39bbe23de73069124451 / . / drivers / regulator / Kconfig
blob: 2b803123512573d8aa64bd404eadb9d47aac1a6b [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]67config REGULATOR_GPIO
68 tristate "GPIO regulator support"
Heiko Stübnerd162b3c2011-10-11 23:11:01 +0200[diff] [blame]69 depends on GENERIC_GPIO
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
71 This driver provides support for regulators that can be
72 controlled via gpios.
73 It is capable of supporting current and voltage regulators
74 and the platform has to provide a mapping of GPIO-states
75 to target volts/amps.
76
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77config REGULATOR_AD5398
78 tristate "Analog Devices AD5398/AD5821 regulators"
79 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]80 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]81 This driver supports AD5398 and AD5821 current regulator chips.
82 If building into module, its name is ad5398.ko.
83
84config REGULATOR_AAT2870
85 tristate "AnalogicTech AAT2870 Regulators"
86 depends on MFD_AAT2870_CORE
87 help
88 If you have a AnalogicTech AAT2870 say Y to enable the
89 regulator driver.
90
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]91config REGULATOR_ARIZONA
92 tristate "Wolfson Arizona class devices"
93 depends on MFD_ARIZONA
94 help
95 Support for the regulators found on Wolfson Arizona class
96 devices.
97
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]98config REGULATOR_DA903X
99 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
100 depends on PMIC_DA903X
101 help
102 Say y here to support the BUCKs and LDOs regulators found on
103 Dialog Semiconductor DA9030/DA9034 PMIC.
104
105config REGULATOR_DA9052
106 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
107 depends on PMIC_DA9052
108 help
109 This driver supports the voltage regulators of DA9052-BC and
110 DA9053-AA/Bx PMIC.
111
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]112config REGULATOR_FAN53555
113 tristate "Fairchild FAN53555 Regulator"
114 depends on I2C
115 select REGMAP_I2C
116 help
117 This driver supports Fairchild FAN53555 Digitally Programmable
118 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
119 regulator that delivers a digitally programmable output from an
120 input voltage supply of 2.5V to 5.5V. The output voltage is
121 programmed through an I2C interface.
122
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]123config REGULATOR_ANATOP
124 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Dong Aishengbaa64152012-09-05 10:57:15 +0800[diff] [blame]125 depends on MFD_SYSCON
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]126 help
127 Say y here to support Freescale i.MX on-chip ANATOP LDOs
128 regulators. It is recommended that this option be
129 enabled on i.MX6 platform.
130
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]131config REGULATOR_MC13XXX_CORE
132 tristate
133
134config REGULATOR_MC13783
135 tristate "Freescale MC13783 regulator driver"
136 depends on MFD_MC13783
137 select REGULATOR_MC13XXX_CORE
138 help
139 Say y here to support the regulators found on the Freescale MC13783
140 PMIC.
141
142config REGULATOR_MC13892
143 tristate "Freescale MC13892 regulator driver"
144 depends on MFD_MC13XXX
145 select REGULATOR_MC13XXX_CORE
146 help
147 Say y here to support the regulators found on the Freescale MC13892
148 PMIC.
149
150config REGULATOR_ISL6271A
151 tristate "Intersil ISL6271A Power regulator"
152 depends on I2C
153 help
154 This driver supports ISL6271A voltage regulator chip.
155
156config REGULATOR_88PM8607
157 bool "Marvell 88PM8607 Power regulators"
158 depends on MFD_88PM860X=y
159 help
160 This driver supports 88PM8607 voltage regulator chips.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]161
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]162config REGULATOR_MAX1586
163 tristate "Maxim 1586/1587 voltage regulator"
164 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]165 help
166 This driver controls a Maxim 1586 or 1587 voltage output
167 regulator via I2C bus. The provided regulator is suitable
168 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
169
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]170config REGULATOR_MAX8649
171 tristate "Maxim 8649 voltage regulator"
172 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]173 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]174 help
175 This driver controls a Maxim 8649 voltage output regulator via
176 I2C bus.
177
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]178config REGULATOR_MAX8660
179 tristate "Maxim 8660/8661 voltage regulator"
180 depends on I2C
181 help
182 This driver controls a Maxim 8660/8661 voltage output
183 regulator via I2C bus.
184
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]185config REGULATOR_MAX8907
186 tristate "Maxim 8907 voltage regulator"
187 depends on MFD_MAX8907
188 help
189 This driver controls a Maxim 8907 voltage output regulator
190 via I2C bus. The provided regulator is suitable for Tegra
191 chip to control Step-Down DC-DC and LDOs.
192
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]193config REGULATOR_MAX8925
194 tristate "Maxim MAX8925 Power Management IC"
195 depends on MFD_MAX8925
196 help
197 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
198
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]199config REGULATOR_MAX8952
200 tristate "Maxim MAX8952 Power Management IC"
201 depends on I2C
202 help
203 This driver controls a Maxim 8952 voltage output regulator
204 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
205 modes ranging from 0.77V to 1.40V by 0.01V steps.
206
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame^]207config REGULATOR_MAX8973
208 tristate "Maxim MAX8973 voltage regulator "
209 depends on I2C
210 select REGMAP_I2C
211 help
212 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
213 switching regulator delievers up to 9A of output current. Each
214 phase operates at a 2MHz fixed frequency with a 120 deg shift
215 from the adjacent phase, allowing the use of small magnetic component.
216
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]217config REGULATOR_MAX8997
218 tristate "Maxim 8997/8966 regulator"
219 depends on MFD_MAX8997
220 help
221 This driver controls a Maxim 8997/8966 regulator
222 via I2C bus. The provided regulator is suitable for S5PC110,
223 S5PV210, and Exynos-4 chips to control VCC_CORE and
224 VCC_USIM voltages.
225
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]226config REGULATOR_MAX8998
227 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]228 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]229 help
230 This driver controls a Maxim 8998 voltage output regulator
231 via I2C bus. The provided regulator is suitable for S3C6410
232 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
233
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]234config REGULATOR_MAX77686
235 tristate "Maxim 77686 regulator"
236 depends on MFD_MAX77686
237 help
238 This driver controls a Maxim 77686 regulator
239 via I2C bus. The provided regulator is suitable for
240 Exynos-4 chips to control VARM and VINT voltages.
241
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]242config REGULATOR_PCAP
243 tristate "Motorola PCAP2 regulator driver"
244 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]245 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]246 This driver provides support for the voltage regulators of the
247 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]248
Marek Szyprowski0cbdf7b2009-05-19 07:33:55 +0200[diff] [blame]249config REGULATOR_LP3971
250 tristate "National Semiconductors LP3971 PMIC regulator driver"
251 depends on I2C
252 help
253 Say Y here to support the voltage regulators and convertors
254 on National Semiconductors LP3971 PMIC
255
Axel Lin5976f092010-09-16 16:48:49 +0800[diff] [blame]256config REGULATOR_LP3972
257 tristate "National Semiconductors LP3972 PMIC regulator driver"
258 depends on I2C
259 help
260 Say Y here to support the voltage regulators and convertors
261 on National Semiconductors LP3972 PMIC
262
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]263config REGULATOR_LP872X
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]264 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Mark Browndc2060c2012-06-21 10:35:58 +0100[diff] [blame]265 depends on I2C=y
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]266 select REGMAP_I2C
267 help
268 This driver supports LP8720/LP8725 PMIC
269
Kim, Miloade75152012-07-18 14:32:57 +0000[diff] [blame]270config REGULATOR_LP8788
271 bool "TI LP8788 Power Regulators"
272 depends on MFD_LP8788
273 help
274 This driver supports LP8788 voltage regulator chip.
275
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]276config REGULATOR_PCF50633
277 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]278 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]279 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]280 Say Y here to support the voltage regulators and convertors
281 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]282
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]283config REGULATOR_RC5T583
284 tristate "RICOH RC5T583 Power regulators"
285 depends on MFD_RC5T583
286 help
287 Select this option to enable the power regulator of RICOH
288 PMIC RC5T583.
289 This driver supports the control of different power rails of device
290 through regulator interface. The device supports multiple DCDC/LDO
291 outputs which can be controlled by i2c communication.
292
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]293config REGULATOR_S2MPS11
294 tristate "Samsung S2MPS11 voltage regulator"
295 depends on MFD_SEC_CORE
296 help
297 This driver supports a Samsung S2MPS11 voltage output regulator
298 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
299 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
300
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]301config REGULATOR_S5M8767
302 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]303 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]304 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]305 This driver supports a Samsung S5M8767A voltage output regulator
306 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
307 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]308
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]309config REGULATOR_AB3100
310 tristate "ST-Ericsson AB3100 Regulator functions"
311 depends on AB3100_CORE
312 default y if AB3100_CORE
313 help
314 These regulators correspond to functionality in the
315 AB3100 analog baseband dealing with power regulators
316 for the system.
317
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]318config REGULATOR_AB8500
319 bool "ST-Ericsson AB8500 Power Regulators"
320 depends on AB8500_CORE
321 help
322 This driver supports the regulators found on the ST-Ericsson mixed
323 signal AB8500 PMIC
324
325config REGULATOR_DBX500_PRCMU
326 bool
327
328config REGULATOR_DB8500_PRCMU
329 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
330 depends on MFD_DB8500_PRCMU
331 select REGULATOR_DBX500_PRCMU
332 help
333 This driver supports the voltage domain regulators controlled by the
334 DB8500 PRCMU
335
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]336config REGULATOR_PALMAS
337 tristate "TI Palmas PMIC Regulators"
338 depends on MFD_PALMAS
339 help
340 If you wish to control the regulators on the Palmas series of
341 chips say Y here. This will enable support for all the software
342 controllable SMPS/LDO regulators.
343
344 The regulators available on Palmas series chips vary depending
345 on the muxing. This is handled automatically in the driver by
346 reading the mux info from OTP.
347
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]348config REGULATOR_TPS6105X
349 tristate "TI TPS6105X Power regulators"
350 depends on TPS6105X
351 default y if TPS6105X
352 help
353 This driver supports TPS61050/TPS61052 voltage regulator chips.
354 It is a single boost converter primarily for white LEDs and
355 audio amplifiers.
356
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]357config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]358 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]359 depends on I2C
360 select REGMAP_I2C
361 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]362 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]363 regulator is meant for processor core supply. This chip is
364 high-frequency synchronous step down dc-dc converter optimized
365 for battery-powered portable applications.
366
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]367config REGULATOR_TPS65023
368 tristate "TI TPS65023 Power regulators"
369 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]370 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]371 help
372 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
373 three step-down converters and two general-purpose LDO voltage regulators.
374 It supports TI's software based Class-2 SmartReflex implementation.
375
376config REGULATOR_TPS6507X
377 tristate "TI TPS6507X Power regulators"
378 depends on I2C
379 help
380 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
381 three step-down converters and two general-purpose LDO voltage regulators.
382 It supports TI's software based Class-2 SmartReflex implementation.
383
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]384config REGULATOR_TPS65090
385 tristate "TI TPS65090 Power regulator"
386 depends on MFD_TPS65090
387 help
388 This driver provides support for the voltage regulators on the
389 TI TPS65090 PMIC.
390
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]391config REGULATOR_TPS65217
392 tristate "TI TPS65217 Power regulators"
393 depends on MFD_TPS65217
394 help
395 This driver supports TPS65217 voltage regulator chips. TPS65217
396 provides three step-down converters and four general-purpose LDO
397 voltage regulators. It supports software based voltage control
398 for different voltage domains
399
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]400config REGULATOR_TPS6524X
401 tristate "TI TPS6524X Power regulators"
402 depends on SPI
403 help
404 This driver supports TPS6524X voltage regulator chips. TPS6524X
405 provides three step-down converters and two general-purpose LDO
406 voltage regulators. This device is interfaced using a customized
407 serial interface currently supported on the sequencer serial
408 port controller.
409
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]410config REGULATOR_TPS6586X
411 tristate "TI TPS6586X Power regulators"
412 depends on MFD_TPS6586X
413 help
414 This driver supports TPS6586X voltage regulator chips.
415
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]416config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]417 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]418 depends on MFD_TPS65910
419 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]420 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]421
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]422config REGULATOR_TPS65912
423 tristate "TI TPS65912 Power regulator"
424 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]425 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]426 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]427
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]428config REGULATOR_TWL4030
429 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
430 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]431 help
432 This driver supports the voltage regulators provided by
433 this family of companion chips.
434
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]435config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]436 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]437 depends on MFD_WM831X
438 help
439 Support the voltage and current regulators of the WM831x series
440 of PMIC devices.
441
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]442config REGULATOR_WM8350
443 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
444 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]445 help
446 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]447 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]448
449config REGULATOR_WM8400
450 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
451 depends on MFD_WM8400
452 help
453 This driver provides support for the voltage regulators of the
454 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]455
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]456config REGULATOR_WM8994
457 tristate "Wolfson Microelectronics WM8994 CODEC"
458 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]459 help
460 This driver provides support for the voltage regulators on the
461 WM8994 CODEC.
462
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]463endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]464