Thomas Gleixner | 74ba920 | 2019-05-20 09:19:02 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 2 | /* |
| 3 | * adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware |
| 4 | * monitoring |
| 5 | * This driver handles the ADT7410 and compatible digital temperature sensors. |
| 6 | * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22 |
| 7 | * based on lm75.c by Frodo Looijaard <frodol@dds.nl> |
| 8 | * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com> |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/slab.h> |
| 14 | #include <linux/jiffies.h> |
| 15 | #include <linux/hwmon.h> |
| 16 | #include <linux/hwmon-sysfs.h> |
| 17 | #include <linux/err.h> |
| 18 | #include <linux/mutex.h> |
| 19 | #include <linux/delay.h> |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 20 | #include <linux/interrupt.h> |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 21 | |
| 22 | #include "adt7x10.h" |
| 23 | |
| 24 | /* |
| 25 | * ADT7X10 status |
| 26 | */ |
| 27 | #define ADT7X10_STAT_T_LOW (1 << 4) |
| 28 | #define ADT7X10_STAT_T_HIGH (1 << 5) |
| 29 | #define ADT7X10_STAT_T_CRIT (1 << 6) |
| 30 | #define ADT7X10_STAT_NOT_RDY (1 << 7) |
| 31 | |
| 32 | /* |
| 33 | * ADT7X10 config |
| 34 | */ |
| 35 | #define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1) |
| 36 | #define ADT7X10_CT_POLARITY (1 << 2) |
| 37 | #define ADT7X10_INT_POLARITY (1 << 3) |
| 38 | #define ADT7X10_EVENT_MODE (1 << 4) |
| 39 | #define ADT7X10_MODE_MASK (1 << 5 | 1 << 6) |
| 40 | #define ADT7X10_FULL (0 << 5 | 0 << 6) |
| 41 | #define ADT7X10_PD (1 << 5 | 1 << 6) |
| 42 | #define ADT7X10_RESOLUTION (1 << 7) |
| 43 | |
| 44 | /* |
| 45 | * ADT7X10 masks |
| 46 | */ |
| 47 | #define ADT7X10_T13_VALUE_MASK 0xFFF8 |
| 48 | #define ADT7X10_T_HYST_MASK 0xF |
| 49 | |
| 50 | /* straight from the datasheet */ |
| 51 | #define ADT7X10_TEMP_MIN (-55000) |
| 52 | #define ADT7X10_TEMP_MAX 150000 |
| 53 | |
| 54 | /* Each client has this additional data */ |
| 55 | struct adt7x10_data { |
| 56 | const struct adt7x10_ops *ops; |
| 57 | const char *name; |
| 58 | struct device *hwmon_dev; |
| 59 | struct mutex update_lock; |
| 60 | u8 config; |
| 61 | u8 oldconfig; |
| 62 | bool valid; /* true if registers valid */ |
| 63 | unsigned long last_updated; /* In jiffies */ |
| 64 | s16 temp[4]; /* Register values, |
| 65 | 0 = input |
| 66 | 1 = high |
| 67 | 2 = low |
| 68 | 3 = critical */ |
| 69 | u8 hyst; /* hysteresis offset */ |
| 70 | }; |
| 71 | |
| 72 | static int adt7x10_read_byte(struct device *dev, u8 reg) |
| 73 | { |
| 74 | struct adt7x10_data *d = dev_get_drvdata(dev); |
| 75 | return d->ops->read_byte(dev, reg); |
| 76 | } |
| 77 | |
| 78 | static int adt7x10_write_byte(struct device *dev, u8 reg, u8 data) |
| 79 | { |
| 80 | struct adt7x10_data *d = dev_get_drvdata(dev); |
| 81 | return d->ops->write_byte(dev, reg, data); |
| 82 | } |
| 83 | |
| 84 | static int adt7x10_read_word(struct device *dev, u8 reg) |
| 85 | { |
| 86 | struct adt7x10_data *d = dev_get_drvdata(dev); |
| 87 | return d->ops->read_word(dev, reg); |
| 88 | } |
| 89 | |
| 90 | static int adt7x10_write_word(struct device *dev, u8 reg, u16 data) |
| 91 | { |
| 92 | struct adt7x10_data *d = dev_get_drvdata(dev); |
| 93 | return d->ops->write_word(dev, reg, data); |
| 94 | } |
| 95 | |
| 96 | static const u8 ADT7X10_REG_TEMP[4] = { |
| 97 | ADT7X10_TEMPERATURE, /* input */ |
| 98 | ADT7X10_T_ALARM_HIGH, /* high */ |
| 99 | ADT7X10_T_ALARM_LOW, /* low */ |
| 100 | ADT7X10_T_CRIT, /* critical */ |
| 101 | }; |
| 102 | |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 103 | static irqreturn_t adt7x10_irq_handler(int irq, void *private) |
| 104 | { |
| 105 | struct device *dev = private; |
| 106 | int status; |
| 107 | |
| 108 | status = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| 109 | if (status < 0) |
| 110 | return IRQ_HANDLED; |
| 111 | |
| 112 | if (status & ADT7X10_STAT_T_HIGH) |
| 113 | sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm"); |
| 114 | if (status & ADT7X10_STAT_T_LOW) |
| 115 | sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm"); |
| 116 | if (status & ADT7X10_STAT_T_CRIT) |
| 117 | sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm"); |
| 118 | |
| 119 | return IRQ_HANDLED; |
| 120 | } |
| 121 | |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 122 | static int adt7x10_temp_ready(struct device *dev) |
| 123 | { |
| 124 | int i, status; |
| 125 | |
| 126 | for (i = 0; i < 6; i++) { |
| 127 | status = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| 128 | if (status < 0) |
| 129 | return status; |
| 130 | if (!(status & ADT7X10_STAT_NOT_RDY)) |
| 131 | return 0; |
| 132 | msleep(60); |
| 133 | } |
| 134 | return -ETIMEDOUT; |
| 135 | } |
| 136 | |
| 137 | static int adt7x10_update_temp(struct device *dev) |
| 138 | { |
| 139 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 140 | int ret = 0; |
| 141 | |
| 142 | mutex_lock(&data->update_lock); |
| 143 | |
| 144 | if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| 145 | || !data->valid) { |
| 146 | int temp; |
| 147 | |
| 148 | dev_dbg(dev, "Starting update\n"); |
| 149 | |
| 150 | ret = adt7x10_temp_ready(dev); /* check for new value */ |
| 151 | if (ret) |
| 152 | goto abort; |
| 153 | |
| 154 | temp = adt7x10_read_word(dev, ADT7X10_REG_TEMP[0]); |
| 155 | if (temp < 0) { |
| 156 | ret = temp; |
| 157 | dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| 158 | ADT7X10_REG_TEMP[0], ret); |
| 159 | goto abort; |
| 160 | } |
| 161 | data->temp[0] = temp; |
| 162 | data->last_updated = jiffies; |
| 163 | data->valid = true; |
| 164 | } |
| 165 | |
| 166 | abort: |
| 167 | mutex_unlock(&data->update_lock); |
| 168 | return ret; |
| 169 | } |
| 170 | |
| 171 | static int adt7x10_fill_cache(struct device *dev) |
| 172 | { |
| 173 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 174 | int ret; |
| 175 | int i; |
| 176 | |
| 177 | for (i = 1; i < ARRAY_SIZE(data->temp); i++) { |
| 178 | ret = adt7x10_read_word(dev, ADT7X10_REG_TEMP[i]); |
| 179 | if (ret < 0) { |
| 180 | dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| 181 | ADT7X10_REG_TEMP[i], ret); |
| 182 | return ret; |
| 183 | } |
| 184 | data->temp[i] = ret; |
| 185 | } |
| 186 | |
| 187 | ret = adt7x10_read_byte(dev, ADT7X10_T_HYST); |
| 188 | if (ret < 0) { |
| 189 | dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| 190 | ADT7X10_T_HYST, ret); |
| 191 | return ret; |
| 192 | } |
| 193 | data->hyst = ret; |
| 194 | |
| 195 | return 0; |
| 196 | } |
| 197 | |
| 198 | static s16 ADT7X10_TEMP_TO_REG(long temp) |
| 199 | { |
| 200 | return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN, |
| 201 | ADT7X10_TEMP_MAX) * 128, 1000); |
| 202 | } |
| 203 | |
| 204 | static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg) |
| 205 | { |
| 206 | /* in 13 bit mode, bits 0-2 are status flags - mask them out */ |
| 207 | if (!(data->config & ADT7X10_RESOLUTION)) |
| 208 | reg &= ADT7X10_T13_VALUE_MASK; |
| 209 | /* |
| 210 | * temperature is stored in twos complement format, in steps of |
| 211 | * 1/128°C |
| 212 | */ |
| 213 | return DIV_ROUND_CLOSEST(reg * 1000, 128); |
| 214 | } |
| 215 | |
| 216 | /*-----------------------------------------------------------------------*/ |
| 217 | |
| 218 | /* sysfs attributes for hwmon */ |
| 219 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 220 | static ssize_t adt7x10_temp_show(struct device *dev, |
| 221 | struct device_attribute *da, char *buf) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 222 | { |
| 223 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 224 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 225 | |
| 226 | |
| 227 | if (attr->index == 0) { |
| 228 | int ret; |
| 229 | |
| 230 | ret = adt7x10_update_temp(dev); |
| 231 | if (ret) |
| 232 | return ret; |
| 233 | } |
| 234 | |
| 235 | return sprintf(buf, "%d\n", ADT7X10_REG_TO_TEMP(data, |
| 236 | data->temp[attr->index])); |
| 237 | } |
| 238 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 239 | static ssize_t adt7x10_temp_store(struct device *dev, |
| 240 | struct device_attribute *da, |
| 241 | const char *buf, size_t count) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 242 | { |
| 243 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 244 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 245 | int nr = attr->index; |
| 246 | long temp; |
| 247 | int ret; |
| 248 | |
| 249 | ret = kstrtol(buf, 10, &temp); |
| 250 | if (ret) |
| 251 | return ret; |
| 252 | |
| 253 | mutex_lock(&data->update_lock); |
| 254 | data->temp[nr] = ADT7X10_TEMP_TO_REG(temp); |
| 255 | ret = adt7x10_write_word(dev, ADT7X10_REG_TEMP[nr], data->temp[nr]); |
| 256 | if (ret) |
| 257 | count = ret; |
| 258 | mutex_unlock(&data->update_lock); |
| 259 | return count; |
| 260 | } |
| 261 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 262 | static ssize_t adt7x10_t_hyst_show(struct device *dev, |
| 263 | struct device_attribute *da, char *buf) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 264 | { |
| 265 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 266 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 267 | int nr = attr->index; |
| 268 | int hyst; |
| 269 | |
| 270 | hyst = (data->hyst & ADT7X10_T_HYST_MASK) * 1000; |
| 271 | |
| 272 | /* |
| 273 | * hysteresis is stored as a 4 bit offset in the device, convert it |
| 274 | * to an absolute value |
| 275 | */ |
| 276 | if (nr == 2) /* min has positive offset, others have negative */ |
| 277 | hyst = -hyst; |
| 278 | return sprintf(buf, "%d\n", |
| 279 | ADT7X10_REG_TO_TEMP(data, data->temp[nr]) - hyst); |
| 280 | } |
| 281 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 282 | static ssize_t adt7x10_t_hyst_store(struct device *dev, |
| 283 | struct device_attribute *da, |
| 284 | const char *buf, size_t count) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 285 | { |
| 286 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 287 | int limit, ret; |
| 288 | long hyst; |
| 289 | |
| 290 | ret = kstrtol(buf, 10, &hyst); |
| 291 | if (ret) |
| 292 | return ret; |
| 293 | /* convert absolute hysteresis value to a 4 bit delta value */ |
| 294 | limit = ADT7X10_REG_TO_TEMP(data, data->temp[1]); |
| 295 | hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX); |
| 296 | data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), |
| 297 | 0, ADT7X10_T_HYST_MASK); |
| 298 | ret = adt7x10_write_byte(dev, ADT7X10_T_HYST, data->hyst); |
| 299 | if (ret) |
| 300 | return ret; |
| 301 | |
| 302 | return count; |
| 303 | } |
| 304 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 305 | static ssize_t adt7x10_alarm_show(struct device *dev, |
| 306 | struct device_attribute *da, char *buf) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 307 | { |
| 308 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 309 | int ret; |
| 310 | |
| 311 | ret = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| 312 | if (ret < 0) |
| 313 | return ret; |
| 314 | |
| 315 | return sprintf(buf, "%d\n", !!(ret & attr->index)); |
| 316 | } |
| 317 | |
Julia Lawall | ac8e35b | 2016-12-22 13:04:35 +0100 | [diff] [blame] | 318 | static ssize_t name_show(struct device *dev, struct device_attribute *da, |
| 319 | char *buf) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 320 | { |
| 321 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 322 | |
| 323 | return sprintf(buf, "%s\n", data->name); |
| 324 | } |
| 325 | |
Guenter Roeck | f9fe9de | 2018-12-10 14:02:02 -0800 | [diff] [blame] | 326 | static SENSOR_DEVICE_ATTR_RO(temp1_input, adt7x10_temp, 0); |
| 327 | static SENSOR_DEVICE_ATTR_RW(temp1_max, adt7x10_temp, 1); |
| 328 | static SENSOR_DEVICE_ATTR_RW(temp1_min, adt7x10_temp, 2); |
| 329 | static SENSOR_DEVICE_ATTR_RW(temp1_crit, adt7x10_temp, 3); |
| 330 | static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, adt7x10_t_hyst, 1); |
| 331 | static SENSOR_DEVICE_ATTR_RO(temp1_min_hyst, adt7x10_t_hyst, 2); |
| 332 | static SENSOR_DEVICE_ATTR_RO(temp1_crit_hyst, adt7x10_t_hyst, 3); |
| 333 | static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, adt7x10_alarm, |
| 334 | ADT7X10_STAT_T_LOW); |
| 335 | static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, adt7x10_alarm, |
| 336 | ADT7X10_STAT_T_HIGH); |
| 337 | static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, adt7x10_alarm, |
| 338 | ADT7X10_STAT_T_CRIT); |
Julia Lawall | ac8e35b | 2016-12-22 13:04:35 +0100 | [diff] [blame] | 339 | static DEVICE_ATTR_RO(name); |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 340 | |
| 341 | static struct attribute *adt7x10_attributes[] = { |
| 342 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 343 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 344 | &sensor_dev_attr_temp1_min.dev_attr.attr, |
| 345 | &sensor_dev_attr_temp1_crit.dev_attr.attr, |
| 346 | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| 347 | &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, |
| 348 | &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, |
| 349 | &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, |
| 350 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| 351 | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, |
| 352 | NULL |
| 353 | }; |
| 354 | |
| 355 | static const struct attribute_group adt7x10_group = { |
| 356 | .attrs = adt7x10_attributes, |
| 357 | }; |
| 358 | |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 359 | int adt7x10_probe(struct device *dev, const char *name, int irq, |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 360 | const struct adt7x10_ops *ops) |
| 361 | { |
| 362 | struct adt7x10_data *data; |
| 363 | int ret; |
| 364 | |
| 365 | data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| 366 | if (!data) |
| 367 | return -ENOMEM; |
| 368 | |
| 369 | data->ops = ops; |
| 370 | data->name = name; |
| 371 | |
| 372 | dev_set_drvdata(dev, data); |
| 373 | mutex_init(&data->update_lock); |
| 374 | |
| 375 | /* configure as specified */ |
| 376 | ret = adt7x10_read_byte(dev, ADT7X10_CONFIG); |
| 377 | if (ret < 0) { |
| 378 | dev_dbg(dev, "Can't read config? %d\n", ret); |
| 379 | return ret; |
| 380 | } |
| 381 | data->oldconfig = ret; |
| 382 | |
| 383 | /* |
| 384 | * Set to 16 bit resolution, continous conversion and comparator mode. |
| 385 | */ |
| 386 | data->config = data->oldconfig; |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 387 | data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY | |
| 388 | ADT7X10_INT_POLARITY); |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 389 | data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE; |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 390 | |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 391 | if (data->config != data->oldconfig) { |
| 392 | ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config); |
| 393 | if (ret) |
| 394 | return ret; |
| 395 | } |
| 396 | dev_dbg(dev, "Config %02x\n", data->config); |
| 397 | |
| 398 | ret = adt7x10_fill_cache(dev); |
| 399 | if (ret) |
| 400 | goto exit_restore; |
| 401 | |
| 402 | /* Register sysfs hooks */ |
| 403 | ret = sysfs_create_group(&dev->kobj, &adt7x10_group); |
| 404 | if (ret) |
| 405 | goto exit_restore; |
| 406 | |
| 407 | /* |
| 408 | * The I2C device will already have it's own 'name' attribute, but for |
| 409 | * the SPI device we need to register it. name will only be non NULL if |
| 410 | * the device doesn't register the 'name' attribute on its own. |
| 411 | */ |
| 412 | if (name) { |
| 413 | ret = device_create_file(dev, &dev_attr_name); |
| 414 | if (ret) |
| 415 | goto exit_remove; |
| 416 | } |
| 417 | |
| 418 | data->hwmon_dev = hwmon_device_register(dev); |
| 419 | if (IS_ERR(data->hwmon_dev)) { |
| 420 | ret = PTR_ERR(data->hwmon_dev); |
| 421 | goto exit_remove_name; |
| 422 | } |
| 423 | |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 424 | if (irq > 0) { |
| 425 | ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler, |
| 426 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 427 | dev_name(dev), dev); |
| 428 | if (ret) |
| 429 | goto exit_hwmon_device_unregister; |
| 430 | } |
| 431 | |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 432 | return 0; |
| 433 | |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 434 | exit_hwmon_device_unregister: |
| 435 | hwmon_device_unregister(data->hwmon_dev); |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 436 | exit_remove_name: |
| 437 | if (name) |
| 438 | device_remove_file(dev, &dev_attr_name); |
| 439 | exit_remove: |
| 440 | sysfs_remove_group(&dev->kobj, &adt7x10_group); |
| 441 | exit_restore: |
| 442 | adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig); |
| 443 | return ret; |
| 444 | } |
| 445 | EXPORT_SYMBOL_GPL(adt7x10_probe); |
| 446 | |
Uwe Kleine-König | beee789 | 2021-10-11 15:27:43 +0200 | [diff] [blame] | 447 | void adt7x10_remove(struct device *dev, int irq) |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 448 | { |
| 449 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 450 | |
Lars-Peter Clausen | 4b5e536 | 2013-03-12 11:38:47 +0100 | [diff] [blame] | 451 | if (irq > 0) |
| 452 | free_irq(irq, dev); |
| 453 | |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 454 | hwmon_device_unregister(data->hwmon_dev); |
| 455 | if (data->name) |
| 456 | device_remove_file(dev, &dev_attr_name); |
| 457 | sysfs_remove_group(&dev->kobj, &adt7x10_group); |
| 458 | if (data->oldconfig != data->config) |
| 459 | adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig); |
Lars-Peter Clausen | 51c2a48 | 2013-03-12 11:38:46 +0100 | [diff] [blame] | 460 | } |
| 461 | EXPORT_SYMBOL_GPL(adt7x10_remove); |
| 462 | |
| 463 | #ifdef CONFIG_PM_SLEEP |
| 464 | |
| 465 | static int adt7x10_suspend(struct device *dev) |
| 466 | { |
| 467 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 468 | |
| 469 | return adt7x10_write_byte(dev, ADT7X10_CONFIG, |
| 470 | data->config | ADT7X10_PD); |
| 471 | } |
| 472 | |
| 473 | static int adt7x10_resume(struct device *dev) |
| 474 | { |
| 475 | struct adt7x10_data *data = dev_get_drvdata(dev); |
| 476 | |
| 477 | return adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config); |
| 478 | } |
| 479 | |
| 480 | SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume); |
| 481 | EXPORT_SYMBOL_GPL(adt7x10_dev_pm_ops); |
| 482 | |
| 483 | #endif /* CONFIG_PM_SLEEP */ |
| 484 | |
| 485 | MODULE_AUTHOR("Hartmut Knaack"); |
| 486 | MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code"); |
| 487 | MODULE_LICENSE("GPL"); |