Andy Shevchenko | 0f04a81 | 2020-04-07 20:38:49 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* MCP23S08 SPI GPIO driver */ |
| 3 | |
| 4 | #include <linux/mod_devicetable.h> |
| 5 | #include <linux/module.h> |
| 6 | #include <linux/property.h> |
| 7 | #include <linux/regmap.h> |
| 8 | #include <linux/spi/spi.h> |
| 9 | |
| 10 | #include "pinctrl-mcp23s08.h" |
| 11 | |
| 12 | #define MCP_MAX_DEV_PER_CS 8 |
| 13 | |
| 14 | /* |
| 15 | * A given spi_device can represent up to eight mcp23sxx chips |
| 16 | * sharing the same chipselect but using different addresses |
| 17 | * (e.g. chips #0 and #3 might be populated, but not #1 or #2). |
| 18 | * Driver data holds all the per-chip data. |
| 19 | */ |
| 20 | struct mcp23s08_driver_data { |
| 21 | unsigned ngpio; |
| 22 | struct mcp23s08 *mcp[8]; |
| 23 | struct mcp23s08 chip[]; |
| 24 | }; |
| 25 | |
| 26 | static int mcp23sxx_spi_write(void *context, const void *data, size_t count) |
| 27 | { |
| 28 | struct mcp23s08 *mcp = context; |
| 29 | struct spi_device *spi = to_spi_device(mcp->dev); |
| 30 | struct spi_message m; |
| 31 | struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, }, |
| 32 | { .tx_buf = data, .len = count, }, }; |
| 33 | |
| 34 | spi_message_init(&m); |
| 35 | spi_message_add_tail(&t[0], &m); |
| 36 | spi_message_add_tail(&t[1], &m); |
| 37 | |
| 38 | return spi_sync(spi, &m); |
| 39 | } |
| 40 | |
| 41 | static int mcp23sxx_spi_gather_write(void *context, |
| 42 | const void *reg, size_t reg_size, |
| 43 | const void *val, size_t val_size) |
| 44 | { |
| 45 | struct mcp23s08 *mcp = context; |
| 46 | struct spi_device *spi = to_spi_device(mcp->dev); |
| 47 | struct spi_message m; |
| 48 | struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, }, |
| 49 | { .tx_buf = reg, .len = reg_size, }, |
| 50 | { .tx_buf = val, .len = val_size, }, }; |
| 51 | |
| 52 | spi_message_init(&m); |
| 53 | spi_message_add_tail(&t[0], &m); |
| 54 | spi_message_add_tail(&t[1], &m); |
| 55 | spi_message_add_tail(&t[2], &m); |
| 56 | |
| 57 | return spi_sync(spi, &m); |
| 58 | } |
| 59 | |
| 60 | static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size, |
| 61 | void *val, size_t val_size) |
| 62 | { |
| 63 | struct mcp23s08 *mcp = context; |
| 64 | struct spi_device *spi = to_spi_device(mcp->dev); |
| 65 | u8 tx[2]; |
| 66 | |
| 67 | if (reg_size != 1) |
| 68 | return -EINVAL; |
| 69 | |
| 70 | tx[0] = mcp->addr | 0x01; |
| 71 | tx[1] = *((u8 *) reg); |
| 72 | |
| 73 | return spi_write_then_read(spi, tx, sizeof(tx), val, val_size); |
| 74 | } |
| 75 | |
| 76 | static const struct regmap_bus mcp23sxx_spi_regmap = { |
| 77 | .write = mcp23sxx_spi_write, |
| 78 | .gather_write = mcp23sxx_spi_gather_write, |
| 79 | .read = mcp23sxx_spi_read, |
| 80 | }; |
| 81 | |
| 82 | static int mcp23s08_spi_regmap_init(struct mcp23s08 *mcp, struct device *dev, |
| 83 | unsigned int addr, unsigned int type) |
| 84 | { |
| 85 | const struct regmap_config *config; |
| 86 | struct regmap_config *copy; |
| 87 | const char *name; |
| 88 | |
| 89 | switch (type) { |
| 90 | case MCP_TYPE_S08: |
| 91 | mcp->reg_shift = 0; |
| 92 | mcp->chip.ngpio = 8; |
| 93 | mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s08.%d", addr); |
| 94 | |
| 95 | config = &mcp23x08_regmap; |
| 96 | name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr); |
| 97 | break; |
| 98 | |
| 99 | case MCP_TYPE_S17: |
| 100 | mcp->reg_shift = 1; |
| 101 | mcp->chip.ngpio = 16; |
| 102 | mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s17.%d", addr); |
| 103 | |
| 104 | config = &mcp23x17_regmap; |
| 105 | name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr); |
| 106 | break; |
| 107 | |
| 108 | case MCP_TYPE_S18: |
| 109 | mcp->reg_shift = 1; |
| 110 | mcp->chip.ngpio = 16; |
| 111 | mcp->chip.label = "mcp23s18"; |
| 112 | |
| 113 | config = &mcp23x17_regmap; |
| 114 | name = config->name; |
| 115 | break; |
| 116 | |
| 117 | default: |
| 118 | dev_err(dev, "invalid device type (%d)\n", type); |
| 119 | return -EINVAL; |
| 120 | } |
| 121 | |
Andy Shevchenko | 2b12c13 | 2020-10-09 21:08:55 +0300 | [diff] [blame] | 122 | copy = devm_kmemdup(dev, config, sizeof(*config), GFP_KERNEL); |
Andy Shevchenko | 0f04a81 | 2020-04-07 20:38:49 +0300 | [diff] [blame] | 123 | if (!copy) |
| 124 | return -ENOMEM; |
| 125 | |
| 126 | copy->name = name; |
| 127 | |
| 128 | mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, copy); |
Andy Shevchenko | a835d3a | 2020-10-09 21:08:56 +0300 | [diff] [blame] | 129 | if (IS_ERR(mcp->regmap)) |
| 130 | dev_err(dev, "regmap init failed for %s\n", mcp->chip.label); |
kernel test robot | 3e5b8f8 | 2020-06-08 09:02:53 +0800 | [diff] [blame] | 131 | return PTR_ERR_OR_ZERO(mcp->regmap); |
Andy Shevchenko | 0f04a81 | 2020-04-07 20:38:49 +0300 | [diff] [blame] | 132 | } |
| 133 | |
| 134 | static int mcp23s08_probe(struct spi_device *spi) |
| 135 | { |
| 136 | struct device *dev = &spi->dev; |
| 137 | struct mcp23s08_driver_data *data; |
| 138 | unsigned long spi_present_mask; |
| 139 | const void *match; |
| 140 | unsigned int addr; |
| 141 | unsigned int ngpio = 0; |
| 142 | int chips; |
| 143 | int type; |
| 144 | int ret; |
| 145 | u32 v; |
| 146 | |
| 147 | match = device_get_match_data(dev); |
| 148 | if (match) |
| 149 | type = (int)(uintptr_t)match; |
| 150 | else |
| 151 | type = spi_get_device_id(spi)->driver_data; |
| 152 | |
| 153 | ret = device_property_read_u32(dev, "microchip,spi-present-mask", &v); |
| 154 | if (ret) { |
| 155 | ret = device_property_read_u32(dev, "mcp,spi-present-mask", &v); |
| 156 | if (ret) { |
| 157 | dev_err(dev, "missing spi-present-mask"); |
| 158 | return ret; |
| 159 | } |
| 160 | } |
| 161 | spi_present_mask = v; |
| 162 | |
| 163 | if (!spi_present_mask || spi_present_mask >= BIT(MCP_MAX_DEV_PER_CS)) { |
| 164 | dev_err(dev, "invalid spi-present-mask"); |
| 165 | return -ENODEV; |
| 166 | } |
| 167 | |
| 168 | chips = hweight_long(spi_present_mask); |
| 169 | |
| 170 | data = devm_kzalloc(dev, struct_size(data, chip, chips), GFP_KERNEL); |
| 171 | if (!data) |
| 172 | return -ENOMEM; |
| 173 | |
| 174 | spi_set_drvdata(spi, data); |
| 175 | |
| 176 | for_each_set_bit(addr, &spi_present_mask, MCP_MAX_DEV_PER_CS) { |
| 177 | data->mcp[addr] = &data->chip[--chips]; |
| 178 | data->mcp[addr]->irq = spi->irq; |
| 179 | |
| 180 | ret = mcp23s08_spi_regmap_init(data->mcp[addr], dev, addr, type); |
| 181 | if (ret) |
| 182 | return ret; |
| 183 | |
| 184 | data->mcp[addr]->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL, |
| 185 | "mcp23xxx-pinctrl.%d", |
| 186 | addr); |
| 187 | if (!data->mcp[addr]->pinctrl_desc.name) |
| 188 | return -ENOMEM; |
| 189 | |
| 190 | ret = mcp23s08_probe_one(data->mcp[addr], dev, 0x40 | (addr << 1), type, -1); |
| 191 | if (ret < 0) |
| 192 | return ret; |
| 193 | |
| 194 | ngpio += data->mcp[addr]->chip.ngpio; |
| 195 | } |
| 196 | data->ngpio = ngpio; |
| 197 | |
| 198 | return 0; |
| 199 | } |
| 200 | |
| 201 | static const struct spi_device_id mcp23s08_ids[] = { |
| 202 | { "mcp23s08", MCP_TYPE_S08 }, |
| 203 | { "mcp23s17", MCP_TYPE_S17 }, |
| 204 | { "mcp23s18", MCP_TYPE_S18 }, |
| 205 | { } |
| 206 | }; |
| 207 | MODULE_DEVICE_TABLE(spi, mcp23s08_ids); |
| 208 | |
| 209 | static const struct of_device_id mcp23s08_spi_of_match[] = { |
| 210 | { |
| 211 | .compatible = "microchip,mcp23s08", |
| 212 | .data = (void *) MCP_TYPE_S08, |
| 213 | }, |
| 214 | { |
| 215 | .compatible = "microchip,mcp23s17", |
| 216 | .data = (void *) MCP_TYPE_S17, |
| 217 | }, |
| 218 | { |
| 219 | .compatible = "microchip,mcp23s18", |
| 220 | .data = (void *) MCP_TYPE_S18, |
| 221 | }, |
| 222 | /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ |
| 223 | { |
| 224 | .compatible = "mcp,mcp23s08", |
| 225 | .data = (void *) MCP_TYPE_S08, |
| 226 | }, |
| 227 | { |
| 228 | .compatible = "mcp,mcp23s17", |
| 229 | .data = (void *) MCP_TYPE_S17, |
| 230 | }, |
| 231 | { } |
| 232 | }; |
| 233 | MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); |
| 234 | |
| 235 | static struct spi_driver mcp23s08_driver = { |
| 236 | .probe = mcp23s08_probe, |
| 237 | .id_table = mcp23s08_ids, |
| 238 | .driver = { |
| 239 | .name = "mcp23s08", |
| 240 | .of_match_table = mcp23s08_spi_of_match, |
| 241 | }, |
| 242 | }; |
| 243 | |
| 244 | static int __init mcp23s08_spi_init(void) |
| 245 | { |
| 246 | return spi_register_driver(&mcp23s08_driver); |
| 247 | } |
| 248 | |
| 249 | /* |
| 250 | * Register after SPI postcore initcall and before |
| 251 | * subsys initcalls that may rely on these GPIOs. |
| 252 | */ |
| 253 | subsys_initcall(mcp23s08_spi_init); |
| 254 | |
| 255 | static void mcp23s08_spi_exit(void) |
| 256 | { |
| 257 | spi_unregister_driver(&mcp23s08_driver); |
| 258 | } |
| 259 | module_exit(mcp23s08_spi_exit); |
| 260 | |
| 261 | MODULE_LICENSE("GPL"); |