blob: 37632fc637414a4a43b0279543b9bf91051f7b5d [file] [log] [blame]
Thomas Gleixnerd2912cb2019-06-04 10:11:33 +02001// SPDX-License-Identifier: GPL-2.0-only
Kim, Miloff45262a2013-02-18 21:10:14 -08002/*
3 * LP5562 LED driver
4 *
5 * Copyright (C) 2013 Texas Instruments
6 *
7 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
Kim, Miloff45262a2013-02-18 21:10:14 -08008 */
9
10#include <linux/delay.h>
11#include <linux/firmware.h>
12#include <linux/i2c.h>
Kim, Miloff45262a2013-02-18 21:10:14 -080013#include <linux/leds.h>
14#include <linux/module.h>
15#include <linux/mutex.h>
Sachin Kamatc68f46d2013-09-28 04:38:30 -070016#include <linux/of.h>
Kim, Miloff45262a2013-02-18 21:10:14 -080017#include <linux/platform_data/leds-lp55xx.h>
18#include <linux/slab.h>
19
20#include "leds-lp55xx-common.h"
21
22#define LP5562_PROGRAM_LENGTH 32
23#define LP5562_MAX_LEDS 4
24
25/* ENABLE Register 00h */
26#define LP5562_REG_ENABLE 0x00
27#define LP5562_EXEC_ENG1_M 0x30
28#define LP5562_EXEC_ENG2_M 0x0C
29#define LP5562_EXEC_ENG3_M 0x03
30#define LP5562_EXEC_M 0x3F
31#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
32#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
33#define LP5562_EXEC_RUN 0x2A
34#define LP5562_ENABLE_DEFAULT \
35 (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
36#define LP5562_ENABLE_RUN_PROGRAM \
37 (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
38
39/* OPMODE Register 01h */
40#define LP5562_REG_OP_MODE 0x01
41#define LP5562_MODE_ENG1_M 0x30
42#define LP5562_MODE_ENG2_M 0x0C
43#define LP5562_MODE_ENG3_M 0x03
44#define LP5562_LOAD_ENG1 0x10
45#define LP5562_LOAD_ENG2 0x04
46#define LP5562_LOAD_ENG3 0x01
47#define LP5562_RUN_ENG1 0x20
48#define LP5562_RUN_ENG2 0x08
49#define LP5562_RUN_ENG3 0x02
50#define LP5562_ENG1_IS_LOADING(mode) \
51 ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
52#define LP5562_ENG2_IS_LOADING(mode) \
53 ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
54#define LP5562_ENG3_IS_LOADING(mode) \
55 ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
56
57/* BRIGHTNESS Registers */
58#define LP5562_REG_R_PWM 0x04
59#define LP5562_REG_G_PWM 0x03
60#define LP5562_REG_B_PWM 0x02
61#define LP5562_REG_W_PWM 0x0E
62
63/* CURRENT Registers */
64#define LP5562_REG_R_CURRENT 0x07
65#define LP5562_REG_G_CURRENT 0x06
66#define LP5562_REG_B_CURRENT 0x05
67#define LP5562_REG_W_CURRENT 0x0F
68
69/* CONFIG Register 08h */
70#define LP5562_REG_CONFIG 0x08
Kim, Milo81f2a5b42013-03-20 17:37:04 -070071#define LP5562_PWM_HF 0x40
72#define LP5562_PWRSAVE_EN 0x20
73#define LP5562_CLK_INT 0x01 /* Internal clock */
74#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
Kim, Miloff45262a2013-02-18 21:10:14 -080075
76/* RESET Register 0Dh */
77#define LP5562_REG_RESET 0x0D
78#define LP5562_RESET 0xFF
79
80/* PROGRAM ENGINE Registers */
81#define LP5562_REG_PROG_MEM_ENG1 0x10
82#define LP5562_REG_PROG_MEM_ENG2 0x30
83#define LP5562_REG_PROG_MEM_ENG3 0x50
84
85/* LEDMAP Register 70h */
86#define LP5562_REG_ENG_SEL 0x70
87#define LP5562_ENG_SEL_PWM 0
88#define LP5562_ENG_FOR_RGB_M 0x3F
89#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
90#define LP5562_ENG_FOR_W_M 0xC0
91#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
92#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
93#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
94
95/* Program Commands */
96#define LP5562_CMD_DISABLE 0x00
97#define LP5562_CMD_LOAD 0x15
98#define LP5562_CMD_RUN 0x2A
99#define LP5562_CMD_DIRECT 0x3F
100#define LP5562_PATTERN_OFF 0
101
102static inline void lp5562_wait_opmode_done(void)
103{
104 /* operation mode change needs to be longer than 153 us */
105 usleep_range(200, 300);
106}
107
108static inline void lp5562_wait_enable_done(void)
109{
110 /* it takes more 488 us to update ENABLE register */
111 usleep_range(500, 600);
112}
113
114static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
115{
Colin Ian King85775012017-08-24 14:00:54 +0100116 static const u8 addr[] = {
Kim, Miloff45262a2013-02-18 21:10:14 -0800117 LP5562_REG_R_CURRENT,
118 LP5562_REG_G_CURRENT,
119 LP5562_REG_B_CURRENT,
120 LP5562_REG_W_CURRENT,
121 };
122
123 led->led_current = led_current;
124 lp55xx_write(led->chip, addr[led->chan_nr], led_current);
125}
126
127static void lp5562_load_engine(struct lp55xx_chip *chip)
128{
129 enum lp55xx_engine_index idx = chip->engine_idx;
Colin Ian King85775012017-08-24 14:00:54 +0100130 static const u8 mask[] = {
Kim, Miloff45262a2013-02-18 21:10:14 -0800131 [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
132 [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
133 [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
134 };
135
Colin Ian King85775012017-08-24 14:00:54 +0100136 static const u8 val[] = {
Kim, Miloff45262a2013-02-18 21:10:14 -0800137 [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
138 [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
139 [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
140 };
141
142 lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
143
144 lp5562_wait_opmode_done();
145}
146
147static void lp5562_stop_engine(struct lp55xx_chip *chip)
148{
149 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
150 lp5562_wait_opmode_done();
151}
152
153static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
154{
155 int ret;
156 u8 mode;
157 u8 exec;
158
159 /* stop engine */
160 if (!start) {
161 lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
162 lp5562_wait_enable_done();
163 lp5562_stop_engine(chip);
164 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
165 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
166 lp5562_wait_opmode_done();
167 return;
168 }
169
170 /*
171 * To run the engine,
172 * operation mode and enable register should updated at the same time
173 */
174
175 ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
176 if (ret)
177 return;
178
179 ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
180 if (ret)
181 return;
182
183 /* change operation mode to RUN only when each engine is loading */
184 if (LP5562_ENG1_IS_LOADING(mode)) {
185 mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
186 exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
187 }
188
189 if (LP5562_ENG2_IS_LOADING(mode)) {
190 mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
191 exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
192 }
193
194 if (LP5562_ENG3_IS_LOADING(mode)) {
195 mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
196 exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
197 }
198
199 lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
200 lp5562_wait_opmode_done();
201
202 lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
203 lp5562_wait_enable_done();
204}
205
206static int lp5562_update_firmware(struct lp55xx_chip *chip,
207 const u8 *data, size_t size)
208{
209 enum lp55xx_engine_index idx = chip->engine_idx;
210 u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
Colin Ian King85775012017-08-24 14:00:54 +0100211 static const u8 addr[] = {
Kim, Miloff45262a2013-02-18 21:10:14 -0800212 [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
213 [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
214 [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
215 };
216 unsigned cmd;
217 char c[3];
218 int program_size;
219 int nrchars;
220 int offset = 0;
221 int ret;
222 int i;
223
224 /* clear program memory before updating */
225 for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
226 lp55xx_write(chip, addr[idx] + i, 0);
227
228 i = 0;
229 while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
230 /* separate sscanfs because length is working only for %s */
231 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
232 if (ret != 1)
233 goto err;
234
235 ret = sscanf(c, "%2x", &cmd);
236 if (ret != 1)
237 goto err;
238
239 pattern[i] = (u8)cmd;
240 offset += nrchars;
241 i++;
242 }
243
244 /* Each instruction is 16bit long. Check that length is even */
245 if (i % 2)
246 goto err;
247
248 program_size = i;
249 for (i = 0; i < program_size; i++)
250 lp55xx_write(chip, addr[idx] + i, pattern[i]);
251
252 return 0;
253
254err:
255 dev_err(&chip->cl->dev, "wrong pattern format\n");
256 return -EINVAL;
257}
258
259static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
260{
261 const struct firmware *fw = chip->fw;
262
263 if (fw->size > LP5562_PROGRAM_LENGTH) {
264 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
265 fw->size);
266 return;
267 }
268
269 /*
Stephen Boydd1b7c932017-05-08 15:57:47 -0700270 * Program memory sequence
Kim, Miloff45262a2013-02-18 21:10:14 -0800271 * 1) set engine mode to "LOAD"
272 * 2) write firmware data into program memory
273 */
274
275 lp5562_load_engine(chip);
276 lp5562_update_firmware(chip, fw->data, fw->size);
277}
278
279static int lp5562_post_init_device(struct lp55xx_chip *chip)
280{
281 int ret;
Kim, Milo81f2a5b42013-03-20 17:37:04 -0700282 u8 cfg = LP5562_DEFAULT_CFG;
Kim, Miloff45262a2013-02-18 21:10:14 -0800283
284 /* Set all PWMs to direct control mode */
285 ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
286 if (ret)
287 return ret;
288
289 lp5562_wait_opmode_done();
290
Kim, Milo81f2a5b42013-03-20 17:37:04 -0700291 /* Update configuration for the clock setting */
292 if (!lp55xx_is_extclk_used(chip))
293 cfg |= LP5562_CLK_INT;
294
295 ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
Kim, Miloff45262a2013-02-18 21:10:14 -0800296 if (ret)
297 return ret;
298
299 /* Initialize all channels PWM to zero -> leds off */
300 lp55xx_write(chip, LP5562_REG_R_PWM, 0);
301 lp55xx_write(chip, LP5562_REG_G_PWM, 0);
302 lp55xx_write(chip, LP5562_REG_B_PWM, 0);
303 lp55xx_write(chip, LP5562_REG_W_PWM, 0);
304
305 /* Set LED map as register PWM by default */
306 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
307
308 return 0;
309}
310
Andrew Lunn95b2af62015-08-20 12:22:57 +0200311static int lp5562_led_brightness(struct lp55xx_led *led)
Kim, Miloff45262a2013-02-18 21:10:14 -0800312{
Kim, Miloff45262a2013-02-18 21:10:14 -0800313 struct lp55xx_chip *chip = led->chip;
Colin Ian King85775012017-08-24 14:00:54 +0100314 static const u8 addr[] = {
Kim, Miloff45262a2013-02-18 21:10:14 -0800315 LP5562_REG_R_PWM,
316 LP5562_REG_G_PWM,
317 LP5562_REG_B_PWM,
318 LP5562_REG_W_PWM,
319 };
Andrew Lunn95b2af62015-08-20 12:22:57 +0200320 int ret;
Kim, Miloff45262a2013-02-18 21:10:14 -0800321
322 mutex_lock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200323 ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
Kim, Miloff45262a2013-02-18 21:10:14 -0800324 mutex_unlock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200325
326 return ret;
Kim, Miloff45262a2013-02-18 21:10:14 -0800327}
328
329static void lp5562_write_program_memory(struct lp55xx_chip *chip,
330 u8 base, const u8 *rgb, int size)
331{
332 int i;
333
334 if (!rgb || size <= 0)
335 return;
336
337 for (i = 0; i < size; i++)
338 lp55xx_write(chip, base + i, *(rgb + i));
339
340 lp55xx_write(chip, base + i, 0);
341 lp55xx_write(chip, base + i + 1, 0);
342}
343
344/* check the size of program count */
345static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
346{
Jingoo Han432eb692014-02-25 21:11:41 -0800347 return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
348 ptn->size_g >= LP5562_PROGRAM_LENGTH ||
349 ptn->size_b >= LP5562_PROGRAM_LENGTH;
Kim, Miloff45262a2013-02-18 21:10:14 -0800350}
351
352static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
353{
354 struct lp55xx_predef_pattern *ptn;
355 int i;
356
357 if (mode == LP5562_PATTERN_OFF) {
358 lp5562_run_engine(chip, false);
359 return 0;
360 }
361
362 ptn = chip->pdata->patterns + (mode - 1);
363 if (!ptn || _is_pc_overflow(ptn)) {
364 dev_err(&chip->cl->dev, "invalid pattern data\n");
365 return -EINVAL;
366 }
367
368 lp5562_stop_engine(chip);
369
370 /* Set LED map as RGB */
371 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
372
373 /* Load engines */
374 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
375 chip->engine_idx = i;
376 lp5562_load_engine(chip);
377 }
378
379 /* Clear program registers */
380 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
381 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
382 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
383 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
384 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
385 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
386
387 /* Program engines */
388 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
389 ptn->r, ptn->size_r);
390 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
391 ptn->g, ptn->size_g);
392 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
393 ptn->b, ptn->size_b);
394
395 /* Run engines */
396 lp5562_run_engine(chip, true);
397
398 return 0;
399}
400
401static ssize_t lp5562_store_pattern(struct device *dev,
402 struct device_attribute *attr,
403 const char *buf, size_t len)
404{
405 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
406 struct lp55xx_chip *chip = led->chip;
407 struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
408 int num_patterns = chip->pdata->num_patterns;
409 unsigned long mode;
410 int ret;
411
412 ret = kstrtoul(buf, 0, &mode);
413 if (ret)
414 return ret;
415
416 if (mode > num_patterns || !ptn)
417 return -EINVAL;
418
419 mutex_lock(&chip->lock);
420 ret = lp5562_run_predef_led_pattern(chip, mode);
421 mutex_unlock(&chip->lock);
422
423 if (ret)
424 return ret;
425
426 return len;
427}
428
429static ssize_t lp5562_store_engine_mux(struct device *dev,
430 struct device_attribute *attr,
431 const char *buf, size_t len)
432{
433 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
434 struct lp55xx_chip *chip = led->chip;
435 u8 mask;
436 u8 val;
437
438 /* LED map
439 * R ... Engine 1 (fixed)
440 * G ... Engine 2 (fixed)
441 * B ... Engine 3 (fixed)
442 * W ... Engine 1 or 2 or 3
443 */
444
445 if (sysfs_streq(buf, "RGB")) {
446 mask = LP5562_ENG_FOR_RGB_M;
447 val = LP5562_ENG_SEL_RGB;
448 } else if (sysfs_streq(buf, "W")) {
449 enum lp55xx_engine_index idx = chip->engine_idx;
450
451 mask = LP5562_ENG_FOR_W_M;
452 switch (idx) {
453 case LP55XX_ENGINE_1:
454 val = LP5562_ENG1_FOR_W;
455 break;
456 case LP55XX_ENGINE_2:
457 val = LP5562_ENG2_FOR_W;
458 break;
459 case LP55XX_ENGINE_3:
460 val = LP5562_ENG3_FOR_W;
461 break;
462 default:
463 return -EINVAL;
464 }
465
466 } else {
467 dev_err(dev, "choose RGB or W\n");
468 return -EINVAL;
469 }
470
471 mutex_lock(&chip->lock);
472 lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
473 mutex_unlock(&chip->lock);
474
475 return len;
476}
477
Milo Kimdaa124b2013-08-08 14:12:14 +0900478static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
479static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
Kim, Miloff45262a2013-02-18 21:10:14 -0800480
481static struct attribute *lp5562_attributes[] = {
482 &dev_attr_led_pattern.attr,
483 &dev_attr_engine_mux.attr,
484 NULL,
485};
486
487static const struct attribute_group lp5562_group = {
488 .attrs = lp5562_attributes,
489};
490
491/* Chip specific configurations */
492static struct lp55xx_device_config lp5562_cfg = {
493 .max_channel = LP5562_MAX_LEDS,
494 .reset = {
495 .addr = LP5562_REG_RESET,
496 .val = LP5562_RESET,
497 },
498 .enable = {
499 .addr = LP5562_REG_ENABLE,
500 .val = LP5562_ENABLE_DEFAULT,
501 },
502 .post_init_device = lp5562_post_init_device,
503 .set_led_current = lp5562_set_led_current,
Andrew Lunn95b2af62015-08-20 12:22:57 +0200504 .brightness_fn = lp5562_led_brightness,
Kim, Miloff45262a2013-02-18 21:10:14 -0800505 .run_engine = lp5562_run_engine,
506 .firmware_cb = lp5562_firmware_loaded,
507 .dev_attr_group = &lp5562_group,
508};
509
510static int lp5562_probe(struct i2c_client *client,
511 const struct i2c_device_id *id)
512{
513 int ret;
514 struct lp55xx_chip *chip;
515 struct lp55xx_led *led;
Milo Kimed1333522015-08-24 16:09:55 +0900516 struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
Kim, Miloe0150502013-05-07 00:14:49 -0700517 struct device_node *np = client->dev.of_node;
Kim, Miloff45262a2013-02-18 21:10:14 -0800518
Milo Kimed1333522015-08-24 16:09:55 +0900519 if (!pdata) {
Kim, Miloe0150502013-05-07 00:14:49 -0700520 if (np) {
Milo Kimed1333522015-08-24 16:09:55 +0900521 pdata = lp55xx_of_populate_pdata(&client->dev, np);
522 if (IS_ERR(pdata))
523 return PTR_ERR(pdata);
Kim, Miloe0150502013-05-07 00:14:49 -0700524 } else {
525 dev_err(&client->dev, "no platform data\n");
526 return -EINVAL;
527 }
Kim, Miloff45262a2013-02-18 21:10:14 -0800528 }
529
530 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
531 if (!chip)
532 return -ENOMEM;
533
Kees Cooka86854d2018-06-12 14:07:58 -0700534 led = devm_kcalloc(&client->dev,
535 pdata->num_channels, sizeof(*led), GFP_KERNEL);
Kim, Miloff45262a2013-02-18 21:10:14 -0800536 if (!led)
537 return -ENOMEM;
538
539 chip->cl = client;
540 chip->pdata = pdata;
541 chip->cfg = &lp5562_cfg;
542
543 mutex_init(&chip->lock);
544
545 i2c_set_clientdata(client, led);
546
547 ret = lp55xx_init_device(chip);
548 if (ret)
549 goto err_init;
550
551 ret = lp55xx_register_leds(led, chip);
552 if (ret)
553 goto err_register_leds;
554
555 ret = lp55xx_register_sysfs(chip);
556 if (ret) {
557 dev_err(&client->dev, "registering sysfs failed\n");
558 goto err_register_sysfs;
559 }
560
561 return 0;
562
563err_register_sysfs:
564 lp55xx_unregister_leds(led, chip);
565err_register_leds:
566 lp55xx_deinit_device(chip);
567err_init:
568 return ret;
569}
570
571static int lp5562_remove(struct i2c_client *client)
572{
573 struct lp55xx_led *led = i2c_get_clientdata(client);
574 struct lp55xx_chip *chip = led->chip;
575
576 lp5562_stop_engine(chip);
577
578 lp55xx_unregister_sysfs(chip);
579 lp55xx_unregister_leds(led, chip);
580 lp55xx_deinit_device(chip);
581
582 return 0;
583}
584
585static const struct i2c_device_id lp5562_id[] = {
586 { "lp5562", 0 },
Kim, Miloff45262a2013-02-18 21:10:14 -0800587 { }
588};
589MODULE_DEVICE_TABLE(i2c, lp5562_id);
590
Axel Lin28720cf2013-05-08 21:49:37 -0700591#ifdef CONFIG_OF
592static const struct of_device_id of_lp5562_leds_match[] = {
593 { .compatible = "ti,lp5562", },
594 {},
595};
596
597MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
598#endif
599
Kim, Miloff45262a2013-02-18 21:10:14 -0800600static struct i2c_driver lp5562_driver = {
601 .driver = {
602 .name = "lp5562",
Axel Lin28720cf2013-05-08 21:49:37 -0700603 .of_match_table = of_match_ptr(of_lp5562_leds_match),
Kim, Miloff45262a2013-02-18 21:10:14 -0800604 },
605 .probe = lp5562_probe,
606 .remove = lp5562_remove,
607 .id_table = lp5562_id,
608};
609
610module_i2c_driver(lp5562_driver);
611
612MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
613MODULE_AUTHOR("Milo Kim");
614MODULE_LICENSE("GPL");