Lennert Buytenhek | e9937d4 | 2006-03-28 21:08:13 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * linux/arch/arm/mach-pxa/lpd270.c |
| 3 | * |
| 4 | * Support for the LogicPD PXA270 Card Engine. |
| 5 | * Derived from the mainstone code, which carries these notices: |
| 6 | * |
| 7 | * Author: Nicolas Pitre |
| 8 | * Created: Nov 05, 2002 |
| 9 | * Copyright: MontaVista Software Inc. |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License version 2 as |
| 13 | * published by the Free Software Foundation. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/sysdev.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/sched.h> |
| 21 | #include <linux/bitops.h> |
| 22 | #include <linux/fb.h> |
| 23 | #include <linux/ioport.h> |
| 24 | #include <linux/mtd/mtd.h> |
| 25 | #include <linux/mtd/partitions.h> |
| 26 | |
| 27 | #include <asm/types.h> |
| 28 | #include <asm/setup.h> |
| 29 | #include <asm/memory.h> |
| 30 | #include <asm/mach-types.h> |
| 31 | #include <asm/hardware.h> |
| 32 | #include <asm/irq.h> |
| 33 | #include <asm/sizes.h> |
| 34 | |
| 35 | #include <asm/mach/arch.h> |
| 36 | #include <asm/mach/map.h> |
| 37 | #include <asm/mach/irq.h> |
| 38 | #include <asm/mach/flash.h> |
| 39 | |
| 40 | #include <asm/arch/pxa-regs.h> |
| 41 | #include <asm/arch/lpd270.h> |
| 42 | #include <asm/arch/audio.h> |
| 43 | #include <asm/arch/pxafb.h> |
| 44 | #include <asm/arch/mmc.h> |
| 45 | #include <asm/arch/irda.h> |
| 46 | #include <asm/arch/ohci.h> |
| 47 | |
| 48 | #include "generic.h" |
| 49 | |
| 50 | |
| 51 | static unsigned int lpd270_irq_enabled; |
| 52 | |
| 53 | static void lpd270_mask_irq(unsigned int irq) |
| 54 | { |
| 55 | int lpd270_irq = irq - LPD270_IRQ(0); |
| 56 | |
| 57 | __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); |
| 58 | |
| 59 | lpd270_irq_enabled &= ~(1 << lpd270_irq); |
| 60 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); |
| 61 | } |
| 62 | |
| 63 | static void lpd270_unmask_irq(unsigned int irq) |
| 64 | { |
| 65 | int lpd270_irq = irq - LPD270_IRQ(0); |
| 66 | |
| 67 | lpd270_irq_enabled |= 1 << lpd270_irq; |
| 68 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); |
| 69 | } |
| 70 | |
| 71 | static struct irqchip lpd270_irq_chip = { |
| 72 | .ack = lpd270_mask_irq, |
| 73 | .mask = lpd270_mask_irq, |
| 74 | .unmask = lpd270_unmask_irq, |
| 75 | }; |
| 76 | |
| 77 | static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc, |
| 78 | struct pt_regs *regs) |
| 79 | { |
| 80 | unsigned long pending; |
| 81 | |
| 82 | pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; |
| 83 | do { |
| 84 | GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ |
| 85 | if (likely(pending)) { |
| 86 | irq = LPD270_IRQ(0) + __ffs(pending); |
| 87 | desc = irq_desc + irq; |
| 88 | desc_handle_irq(irq, desc, regs); |
| 89 | |
| 90 | pending = __raw_readw(LPD270_INT_STATUS) & |
| 91 | lpd270_irq_enabled; |
| 92 | } |
| 93 | } while (pending); |
| 94 | } |
| 95 | |
| 96 | static void __init lpd270_init_irq(void) |
| 97 | { |
| 98 | int irq; |
| 99 | |
| 100 | pxa_init_irq(); |
| 101 | |
| 102 | __raw_writew(0, LPD270_INT_MASK); |
| 103 | __raw_writew(0, LPD270_INT_STATUS); |
| 104 | |
| 105 | /* setup extra LogicPD PXA270 irqs */ |
| 106 | for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { |
| 107 | set_irq_chip(irq, &lpd270_irq_chip); |
| 108 | set_irq_handler(irq, do_level_IRQ); |
| 109 | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| 110 | } |
| 111 | set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); |
| 112 | set_irq_type(IRQ_GPIO(0), IRQT_FALLING); |
| 113 | } |
| 114 | |
| 115 | |
| 116 | #ifdef CONFIG_PM |
| 117 | static int lpd270_irq_resume(struct sys_device *dev) |
| 118 | { |
| 119 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); |
| 120 | return 0; |
| 121 | } |
| 122 | |
| 123 | static struct sysdev_class lpd270_irq_sysclass = { |
| 124 | set_kset_name("cpld_irq"), |
| 125 | .resume = lpd270_irq_resume, |
| 126 | }; |
| 127 | |
| 128 | static struct sys_device lpd270_irq_device = { |
| 129 | .cls = &lpd270_irq_sysclass, |
| 130 | }; |
| 131 | |
| 132 | static int __init lpd270_irq_device_init(void) |
| 133 | { |
| 134 | int ret = sysdev_class_register(&lpd270_irq_sysclass); |
| 135 | if (ret == 0) |
| 136 | ret = sysdev_register(&lpd270_irq_device); |
| 137 | return ret; |
| 138 | } |
| 139 | |
| 140 | device_initcall(lpd270_irq_device_init); |
| 141 | #endif |
| 142 | |
| 143 | |
| 144 | static struct resource smc91x_resources[] = { |
| 145 | [0] = { |
| 146 | .start = LPD270_ETH_PHYS, |
| 147 | .end = (LPD270_ETH_PHYS + 0xfffff), |
| 148 | .flags = IORESOURCE_MEM, |
| 149 | }, |
| 150 | [1] = { |
| 151 | .start = LPD270_ETHERNET_IRQ, |
| 152 | .end = LPD270_ETHERNET_IRQ, |
| 153 | .flags = IORESOURCE_IRQ, |
| 154 | }, |
| 155 | }; |
| 156 | |
| 157 | static struct platform_device smc91x_device = { |
| 158 | .name = "smc91x", |
| 159 | .id = 0, |
| 160 | .num_resources = ARRAY_SIZE(smc91x_resources), |
| 161 | .resource = smc91x_resources, |
| 162 | }; |
| 163 | |
| 164 | static struct platform_device lpd270_audio_device = { |
| 165 | .name = "pxa2xx-ac97", |
| 166 | .id = -1, |
| 167 | }; |
| 168 | |
| 169 | static struct resource lpd270_flash_resources[] = { |
| 170 | [0] = { |
| 171 | .start = PXA_CS0_PHYS, |
| 172 | .end = PXA_CS0_PHYS + SZ_64M - 1, |
| 173 | .flags = IORESOURCE_MEM, |
| 174 | }, |
| 175 | [1] = { |
| 176 | .start = PXA_CS1_PHYS, |
| 177 | .end = PXA_CS1_PHYS + SZ_64M - 1, |
| 178 | .flags = IORESOURCE_MEM, |
| 179 | }, |
| 180 | }; |
| 181 | |
| 182 | static struct mtd_partition lpd270_flash0_partitions[] = { |
| 183 | { |
| 184 | .name = "Bootloader", |
| 185 | .size = 0x00040000, |
| 186 | .offset = 0, |
| 187 | .mask_flags = MTD_WRITEABLE /* force read-only */ |
| 188 | }, { |
| 189 | .name = "Kernel", |
| 190 | .size = 0x00400000, |
| 191 | .offset = 0x00040000, |
| 192 | }, { |
| 193 | .name = "Filesystem", |
| 194 | .size = MTDPART_SIZ_FULL, |
| 195 | .offset = 0x00440000 |
| 196 | }, |
| 197 | }; |
| 198 | |
| 199 | static struct flash_platform_data lpd270_flash_data[2] = { |
| 200 | { |
| 201 | .name = "processor-flash", |
| 202 | .map_name = "cfi_probe", |
| 203 | .parts = lpd270_flash0_partitions, |
| 204 | .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), |
| 205 | }, { |
| 206 | .name = "mainboard-flash", |
| 207 | .map_name = "cfi_probe", |
| 208 | .parts = NULL, |
| 209 | .nr_parts = 0, |
| 210 | } |
| 211 | }; |
| 212 | |
| 213 | static struct platform_device lpd270_flash_device[2] = { |
| 214 | { |
| 215 | .name = "pxa2xx-flash", |
| 216 | .id = 0, |
| 217 | .dev = { |
| 218 | .platform_data = &lpd270_flash_data[0], |
| 219 | }, |
| 220 | .resource = &lpd270_flash_resources[0], |
| 221 | .num_resources = 1, |
| 222 | }, { |
| 223 | .name = "pxa2xx-flash", |
| 224 | .id = 1, |
| 225 | .dev = { |
| 226 | .platform_data = &lpd270_flash_data[1], |
| 227 | }, |
| 228 | .resource = &lpd270_flash_resources[1], |
| 229 | .num_resources = 1, |
| 230 | }, |
| 231 | }; |
| 232 | |
| 233 | static void lpd270_backlight_power(int on) |
| 234 | { |
| 235 | if (on) { |
| 236 | pxa_gpio_mode(GPIO16_PWM0_MD); |
| 237 | pxa_set_cken(CKEN0_PWM0, 1); |
| 238 | PWM_CTRL0 = 0; |
| 239 | PWM_PWDUTY0 = 0x3ff; |
| 240 | PWM_PERVAL0 = 0x3ff; |
| 241 | } else { |
| 242 | PWM_CTRL0 = 0; |
| 243 | PWM_PWDUTY0 = 0x0; |
| 244 | PWM_PERVAL0 = 0x3FF; |
| 245 | pxa_set_cken(CKEN0_PWM0, 0); |
| 246 | } |
| 247 | } |
| 248 | |
| 249 | /* 5.7" TFT QVGA (LoLo display number 1) */ |
| 250 | static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = { |
| 251 | .pixclock = 100000, |
| 252 | .xres = 240, |
| 253 | .yres = 320, |
| 254 | .bpp = 16, |
| 255 | .hsync_len = 64, |
| 256 | .left_margin = 0x27, |
| 257 | .right_margin = 0x09, |
| 258 | .vsync_len = 0x04, |
| 259 | .upper_margin = 0x08, |
| 260 | .lower_margin = 0x14, |
| 261 | .sync = 0, |
| 262 | .lccr0 = 0x07800080, |
| 263 | .lccr3 = 0x04400007, |
| 264 | .pxafb_backlight_power = lpd270_backlight_power, |
| 265 | }; |
| 266 | |
| 267 | /* 6.4" TFT VGA (LoLo display number 5) */ |
| 268 | static struct pxafb_mach_info sharp_lq64d343 __initdata = { |
| 269 | .pixclock = 20000, |
| 270 | .xres = 640, |
| 271 | .yres = 480, |
| 272 | .bpp = 16, |
| 273 | .hsync_len = 49, |
| 274 | .left_margin = 0x89, |
| 275 | .right_margin = 0x19, |
| 276 | .vsync_len = 18, |
| 277 | .upper_margin = 0x22, |
| 278 | .lower_margin = 0, |
| 279 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| 280 | .lccr0 = 0x07800080, |
| 281 | .lccr3 = 0x04400001, |
| 282 | .pxafb_backlight_power = lpd270_backlight_power, |
| 283 | }; |
| 284 | |
| 285 | /* 3.5" TFT QVGA (LoLo display number 8) */ |
| 286 | static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = { |
| 287 | .pixclock = 100000, |
| 288 | .xres = 240, |
| 289 | .yres = 320, |
| 290 | .bpp = 16, |
| 291 | .hsync_len = 0x34, |
| 292 | .left_margin = 0x09, |
| 293 | .right_margin = 0x09, |
| 294 | .vsync_len = 0x08, |
| 295 | .upper_margin = 0x05, |
| 296 | .lower_margin = 0x14, |
| 297 | .sync = 0, |
| 298 | .lccr0 = 0x07800080, |
| 299 | .lccr3 = 0x04400007, |
| 300 | .pxafb_backlight_power = lpd270_backlight_power, |
| 301 | }; |
| 302 | |
| 303 | static struct platform_device *platform_devices[] __initdata = { |
| 304 | &smc91x_device, |
| 305 | &lpd270_audio_device, |
| 306 | &lpd270_flash_device[0], |
| 307 | &lpd270_flash_device[1], |
| 308 | }; |
| 309 | |
| 310 | static int lpd270_ohci_init(struct device *dev) |
| 311 | { |
| 312 | /* setup Port1 GPIO pin. */ |
| 313 | pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ |
| 314 | pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ |
| 315 | |
| 316 | /* Set the Power Control Polarity Low and Power Sense |
| 317 | Polarity Low to active low. */ |
| 318 | UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & |
| 319 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); |
| 320 | |
| 321 | return 0; |
| 322 | } |
| 323 | |
| 324 | static struct pxaohci_platform_data lpd270_ohci_platform_data = { |
| 325 | .port_mode = PMM_PERPORT_MODE, |
| 326 | .init = lpd270_ohci_init, |
| 327 | }; |
| 328 | |
| 329 | static void __init lpd270_init(void) |
| 330 | { |
| 331 | lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; |
| 332 | lpd270_flash_data[1].width = 4; |
| 333 | |
| 334 | /* |
| 335 | * System bus arbiter setting: |
| 336 | * - Core_Park |
| 337 | * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 |
| 338 | */ |
| 339 | ARB_CNTRL = ARB_CORE_PARK | 0x234; |
| 340 | |
| 341 | /* |
| 342 | * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. |
| 343 | */ |
| 344 | pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); |
| 345 | |
| 346 | platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); |
| 347 | |
| 348 | // set_pxa_fb_info(&sharp_lq057q3dc02); |
| 349 | set_pxa_fb_info(&sharp_lq64d343); |
| 350 | // set_pxa_fb_info(&sharp_lq035q7db02_20); |
| 351 | |
| 352 | pxa_set_ohci_info(&lpd270_ohci_platform_data); |
| 353 | } |
| 354 | |
| 355 | |
| 356 | static struct map_desc lpd270_io_desc[] __initdata = { |
| 357 | { |
| 358 | .virtual = LPD270_CPLD_VIRT, |
| 359 | .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), |
| 360 | .length = LPD270_CPLD_SIZE, |
| 361 | .type = MT_DEVICE, |
| 362 | }, |
| 363 | }; |
| 364 | |
| 365 | static void __init lpd270_map_io(void) |
| 366 | { |
| 367 | pxa_map_io(); |
| 368 | iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); |
| 369 | |
| 370 | /* initialize sleep mode regs (wake-up sources, etc) */ |
| 371 | PGSR0 = 0x00008800; |
| 372 | PGSR1 = 0x00000002; |
| 373 | PGSR2 = 0x0001FC00; |
| 374 | PGSR3 = 0x00001F81; |
| 375 | PWER = 0xC0000002; |
| 376 | PRER = 0x00000002; |
| 377 | PFER = 0x00000002; |
| 378 | |
| 379 | /* for use I SRAM as framebuffer. */ |
| 380 | PSLR |= 0x00000F04; |
| 381 | PCFR = 0x00000066; |
| 382 | } |
| 383 | |
| 384 | MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") |
| 385 | /* Maintainer: Peter Barada */ |
| 386 | .phys_io = 0x40000000, |
| 387 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| 388 | .boot_params = 0xa0000100, |
| 389 | .map_io = lpd270_map_io, |
| 390 | .init_irq = lpd270_init_irq, |
| 391 | .timer = &pxa_timer, |
| 392 | .init_machine = lpd270_init, |
| 393 | MACHINE_END |