Thomas Gleixner | 75a6faf | 2019-06-01 10:08:37 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 2 | /* |
Luca Ceresoli | d1ddca7 | 2020-06-11 23:11:41 +0200 | [diff] [blame] | 3 | * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 4 | * |
| 5 | * Copyright (C) 2017 DENX Software Engineering |
| 6 | * |
| 7 | * Anatolij Gustschin <agust@denx.de> |
| 8 | * |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 9 | * Manage Xilinx FPGA firmware that is loaded over SPI using |
| 10 | * the slave serial configuration interface. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/device.h> |
| 15 | #include <linux/fpga/fpga-mgr.h> |
| 16 | #include <linux/gpio/consumer.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/mod_devicetable.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/spi/spi.h> |
| 21 | #include <linux/sizes.h> |
| 22 | |
| 23 | struct xilinx_spi_conf { |
| 24 | struct spi_device *spi; |
| 25 | struct gpio_desc *prog_b; |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 26 | struct gpio_desc *init_b; |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 27 | struct gpio_desc *done; |
| 28 | }; |
| 29 | |
| 30 | static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr) |
| 31 | { |
| 32 | struct xilinx_spi_conf *conf = mgr->priv; |
| 33 | |
| 34 | if (!gpiod_get_value(conf->done)) |
| 35 | return FPGA_MGR_STATE_RESET; |
| 36 | |
| 37 | return FPGA_MGR_STATE_UNKNOWN; |
| 38 | } |
| 39 | |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 40 | /** |
| 41 | * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait |
| 42 | * a given delay if the pin is unavailable |
| 43 | * |
| 44 | * @mgr: The FPGA manager object |
| 45 | * @value: Value INIT_B to wait for (1 = asserted = low) |
| 46 | * @alt_udelay: Delay to wait if the INIT_B GPIO is not available |
| 47 | * |
| 48 | * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if |
| 49 | * too much time passed waiting for that. If no INIT_B GPIO is available |
| 50 | * then always return 0. |
| 51 | */ |
| 52 | static int wait_for_init_b(struct fpga_manager *mgr, int value, |
| 53 | unsigned long alt_udelay) |
| 54 | { |
| 55 | struct xilinx_spi_conf *conf = mgr->priv; |
| 56 | unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| 57 | |
| 58 | if (conf->init_b) { |
| 59 | while (time_before(jiffies, timeout)) { |
| 60 | /* dump_state(conf, "wait for init_d .."); */ |
| 61 | if (gpiod_get_value(conf->init_b) == value) |
| 62 | return 0; |
| 63 | usleep_range(100, 400); |
| 64 | } |
| 65 | return -ETIMEDOUT; |
| 66 | } |
| 67 | |
| 68 | udelay(alt_udelay); |
| 69 | |
| 70 | return 0; |
| 71 | } |
| 72 | |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 73 | static int xilinx_spi_write_init(struct fpga_manager *mgr, |
| 74 | struct fpga_image_info *info, |
| 75 | const char *buf, size_t count) |
| 76 | { |
| 77 | struct xilinx_spi_conf *conf = mgr->priv; |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 78 | int err; |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 79 | |
| 80 | if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { |
| 81 | dev_err(&mgr->dev, "Partial reconfiguration not supported.\n"); |
| 82 | return -EINVAL; |
| 83 | } |
| 84 | |
| 85 | gpiod_set_value(conf->prog_b, 1); |
| 86 | |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 87 | err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */ |
| 88 | if (err) { |
| 89 | dev_err(&mgr->dev, "INIT_B pin did not go low\n"); |
| 90 | gpiod_set_value(conf->prog_b, 0); |
| 91 | return err; |
| 92 | } |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 93 | |
| 94 | gpiod_set_value(conf->prog_b, 0); |
| 95 | |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 96 | err = wait_for_init_b(mgr, 0, 0); |
| 97 | if (err) { |
| 98 | dev_err(&mgr->dev, "INIT_B pin did not go high\n"); |
| 99 | return err; |
| 100 | } |
| 101 | |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 102 | if (gpiod_get_value(conf->done)) { |
| 103 | dev_err(&mgr->dev, "Unexpected DONE pin state...\n"); |
| 104 | return -EIO; |
| 105 | } |
| 106 | |
| 107 | /* program latency */ |
Luca Ceresoli | 23f872b | 2020-06-11 23:11:42 +0200 | [diff] [blame] | 108 | usleep_range(7500, 7600); |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf, |
| 113 | size_t count) |
| 114 | { |
| 115 | struct xilinx_spi_conf *conf = mgr->priv; |
| 116 | const char *fw_data = buf; |
| 117 | const char *fw_data_end = fw_data + count; |
| 118 | |
| 119 | while (fw_data < fw_data_end) { |
| 120 | size_t remaining, stride; |
| 121 | int ret; |
| 122 | |
| 123 | remaining = fw_data_end - fw_data; |
| 124 | stride = min_t(size_t, remaining, SZ_4K); |
| 125 | |
| 126 | ret = spi_write(conf->spi, fw_data, stride); |
| 127 | if (ret) { |
| 128 | dev_err(&mgr->dev, "SPI error in firmware write: %d\n", |
| 129 | ret); |
| 130 | return ret; |
| 131 | } |
| 132 | fw_data += stride; |
| 133 | } |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf) |
| 139 | { |
| 140 | struct spi_device *spi = conf->spi; |
| 141 | const u8 din_data[1] = { 0xff }; |
| 142 | int ret; |
| 143 | |
| 144 | ret = spi_write(conf->spi, din_data, sizeof(din_data)); |
| 145 | if (ret) |
| 146 | dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret); |
| 147 | |
| 148 | return ret; |
| 149 | } |
| 150 | |
| 151 | static int xilinx_spi_write_complete(struct fpga_manager *mgr, |
| 152 | struct fpga_image_info *info) |
| 153 | { |
| 154 | struct xilinx_spi_conf *conf = mgr->priv; |
| 155 | unsigned long timeout; |
| 156 | int ret; |
| 157 | |
| 158 | if (gpiod_get_value(conf->done)) |
| 159 | return xilinx_spi_apply_cclk_cycles(conf); |
| 160 | |
| 161 | timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us); |
| 162 | |
| 163 | while (time_before(jiffies, timeout)) { |
| 164 | |
| 165 | ret = xilinx_spi_apply_cclk_cycles(conf); |
| 166 | if (ret) |
| 167 | return ret; |
| 168 | |
| 169 | if (gpiod_get_value(conf->done)) |
| 170 | return xilinx_spi_apply_cclk_cycles(conf); |
| 171 | } |
| 172 | |
| 173 | dev_err(&mgr->dev, "Timeout after config data transfer.\n"); |
| 174 | return -ETIMEDOUT; |
| 175 | } |
| 176 | |
| 177 | static const struct fpga_manager_ops xilinx_spi_ops = { |
| 178 | .state = xilinx_spi_state, |
| 179 | .write_init = xilinx_spi_write_init, |
| 180 | .write = xilinx_spi_write, |
| 181 | .write_complete = xilinx_spi_write_complete, |
| 182 | }; |
| 183 | |
| 184 | static int xilinx_spi_probe(struct spi_device *spi) |
| 185 | { |
| 186 | struct xilinx_spi_conf *conf; |
Alan Tull | 7085e2a | 2018-05-16 18:49:55 -0500 | [diff] [blame] | 187 | struct fpga_manager *mgr; |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 188 | |
| 189 | conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); |
| 190 | if (!conf) |
| 191 | return -ENOMEM; |
| 192 | |
| 193 | conf->spi = spi; |
| 194 | |
| 195 | /* PROGRAM_B is active low */ |
| 196 | conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW); |
| 197 | if (IS_ERR(conf->prog_b)) { |
| 198 | dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n", |
| 199 | PTR_ERR(conf->prog_b)); |
| 200 | return PTR_ERR(conf->prog_b); |
| 201 | } |
| 202 | |
Luca Ceresoli | dd2784c | 2020-06-22 15:37:23 +0200 | [diff] [blame^] | 203 | conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN); |
| 204 | if (IS_ERR(conf->init_b)) { |
| 205 | dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n", |
| 206 | PTR_ERR(conf->init_b)); |
| 207 | return PTR_ERR(conf->init_b); |
| 208 | } |
| 209 | |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 210 | conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN); |
| 211 | if (IS_ERR(conf->done)) { |
| 212 | dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n", |
| 213 | PTR_ERR(conf->done)); |
| 214 | return PTR_ERR(conf->done); |
| 215 | } |
| 216 | |
Alan Tull | 084181f | 2018-10-15 17:20:01 -0500 | [diff] [blame] | 217 | mgr = devm_fpga_mgr_create(&spi->dev, |
| 218 | "Xilinx Slave Serial FPGA Manager", |
| 219 | &xilinx_spi_ops, conf); |
Alan Tull | 7085e2a | 2018-05-16 18:49:55 -0500 | [diff] [blame] | 220 | if (!mgr) |
| 221 | return -ENOMEM; |
| 222 | |
| 223 | spi_set_drvdata(spi, mgr); |
| 224 | |
Alan Tull | 084181f | 2018-10-15 17:20:01 -0500 | [diff] [blame] | 225 | return fpga_mgr_register(mgr); |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 226 | } |
| 227 | |
| 228 | static int xilinx_spi_remove(struct spi_device *spi) |
| 229 | { |
Alan Tull | 7085e2a | 2018-05-16 18:49:55 -0500 | [diff] [blame] | 230 | struct fpga_manager *mgr = spi_get_drvdata(spi); |
| 231 | |
| 232 | fpga_mgr_unregister(mgr); |
Anatolij Gustschin | 061c97d | 2017-03-23 19:34:26 -0500 | [diff] [blame] | 233 | |
| 234 | return 0; |
| 235 | } |
| 236 | |
| 237 | static const struct of_device_id xlnx_spi_of_match[] = { |
| 238 | { .compatible = "xlnx,fpga-slave-serial", }, |
| 239 | {} |
| 240 | }; |
| 241 | MODULE_DEVICE_TABLE(of, xlnx_spi_of_match); |
| 242 | |
| 243 | static struct spi_driver xilinx_slave_spi_driver = { |
| 244 | .driver = { |
| 245 | .name = "xlnx-slave-spi", |
| 246 | .of_match_table = of_match_ptr(xlnx_spi_of_match), |
| 247 | }, |
| 248 | .probe = xilinx_spi_probe, |
| 249 | .remove = xilinx_spi_remove, |
| 250 | }; |
| 251 | |
| 252 | module_spi_driver(xilinx_slave_spi_driver) |
| 253 | |
| 254 | MODULE_LICENSE("GPL v2"); |
| 255 | MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); |
| 256 | MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI"); |