Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
Alexander A. Klimov | 7d4c1ea | 2020-07-08 13:35:46 +0200 | [diff] [blame] | 3 | * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 4 | * |
| 5 | * Texas Instruments DDR3 ECC error correction and detection driver |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms and conditions of the GNU General Public License, |
| 9 | * version 2, as published by the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 14 | * more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License along with |
| 17 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/edac.h> |
| 22 | #include <linux/io.h> |
| 23 | #include <linux/interrupt.h> |
| 24 | #include <linux/of_address.h> |
| 25 | #include <linux/of_device.h> |
| 26 | #include <linux/module.h> |
| 27 | |
| 28 | #include "edac_module.h" |
| 29 | |
| 30 | /* EMIF controller registers */ |
| 31 | #define EMIF_SDRAM_CONFIG 0x008 |
| 32 | #define EMIF_IRQ_STATUS 0x0ac |
| 33 | #define EMIF_IRQ_ENABLE_SET 0x0b4 |
| 34 | #define EMIF_ECC_CTRL 0x110 |
| 35 | #define EMIF_1B_ECC_ERR_CNT 0x130 |
| 36 | #define EMIF_1B_ECC_ERR_THRSH 0x134 |
| 37 | #define EMIF_1B_ECC_ERR_ADDR_LOG 0x13c |
| 38 | #define EMIF_2B_ECC_ERR_ADDR_LOG 0x140 |
| 39 | |
| 40 | /* Bit definitions for EMIF_SDRAM_CONFIG */ |
| 41 | #define SDRAM_TYPE_SHIFT 29 |
| 42 | #define SDRAM_TYPE_MASK GENMASK(31, 29) |
| 43 | #define SDRAM_TYPE_DDR3 (3 << SDRAM_TYPE_SHIFT) |
| 44 | #define SDRAM_TYPE_DDR2 (2 << SDRAM_TYPE_SHIFT) |
| 45 | #define SDRAM_NARROW_MODE_MASK GENMASK(15, 14) |
| 46 | #define SDRAM_K2_NARROW_MODE_SHIFT 12 |
| 47 | #define SDRAM_K2_NARROW_MODE_MASK GENMASK(13, 12) |
| 48 | #define SDRAM_ROWSIZE_SHIFT 7 |
| 49 | #define SDRAM_ROWSIZE_MASK GENMASK(9, 7) |
| 50 | #define SDRAM_IBANK_SHIFT 4 |
| 51 | #define SDRAM_IBANK_MASK GENMASK(6, 4) |
| 52 | #define SDRAM_K2_IBANK_SHIFT 5 |
| 53 | #define SDRAM_K2_IBANK_MASK GENMASK(6, 5) |
| 54 | #define SDRAM_K2_EBANK_SHIFT 3 |
| 55 | #define SDRAM_K2_EBANK_MASK BIT(SDRAM_K2_EBANK_SHIFT) |
| 56 | #define SDRAM_PAGESIZE_SHIFT 0 |
| 57 | #define SDRAM_PAGESIZE_MASK GENMASK(2, 0) |
| 58 | #define SDRAM_K2_PAGESIZE_SHIFT 0 |
| 59 | #define SDRAM_K2_PAGESIZE_MASK GENMASK(1, 0) |
| 60 | |
| 61 | #define EMIF_1B_ECC_ERR_THRSH_SHIFT 24 |
| 62 | |
| 63 | /* IRQ bit definitions */ |
| 64 | #define EMIF_1B_ECC_ERR BIT(5) |
| 65 | #define EMIF_2B_ECC_ERR BIT(4) |
| 66 | #define EMIF_WR_ECC_ERR BIT(3) |
| 67 | #define EMIF_SYS_ERR BIT(0) |
| 68 | /* Bit 31 enables ECC and 28 enables RMW */ |
| 69 | #define ECC_ENABLED (BIT(31) | BIT(28)) |
| 70 | |
| 71 | #define EDAC_MOD_NAME "ti-emif-edac" |
| 72 | |
| 73 | enum { |
| 74 | EMIF_TYPE_DRA7, |
| 75 | EMIF_TYPE_K2 |
| 76 | }; |
| 77 | |
| 78 | struct ti_edac { |
| 79 | void __iomem *reg; |
| 80 | }; |
| 81 | |
| 82 | static u32 ti_edac_readl(struct ti_edac *edac, u16 offset) |
| 83 | { |
| 84 | return readl_relaxed(edac->reg + offset); |
| 85 | } |
| 86 | |
| 87 | static void ti_edac_writel(struct ti_edac *edac, u32 val, u16 offset) |
| 88 | { |
| 89 | writel_relaxed(val, edac->reg + offset); |
| 90 | } |
| 91 | |
| 92 | static irqreturn_t ti_edac_isr(int irq, void *data) |
| 93 | { |
| 94 | struct mem_ctl_info *mci = data; |
| 95 | struct ti_edac *edac = mci->pvt_info; |
| 96 | u32 irq_status; |
| 97 | u32 err_addr; |
| 98 | int err_count; |
| 99 | |
| 100 | irq_status = ti_edac_readl(edac, EMIF_IRQ_STATUS); |
| 101 | |
| 102 | if (irq_status & EMIF_1B_ECC_ERR) { |
| 103 | err_addr = ti_edac_readl(edac, EMIF_1B_ECC_ERR_ADDR_LOG); |
| 104 | err_count = ti_edac_readl(edac, EMIF_1B_ECC_ERR_CNT); |
| 105 | ti_edac_writel(edac, err_count, EMIF_1B_ECC_ERR_CNT); |
| 106 | edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count, |
| 107 | err_addr >> PAGE_SHIFT, |
| 108 | err_addr & ~PAGE_MASK, -1, 0, 0, 0, |
| 109 | mci->ctl_name, "1B"); |
| 110 | } |
| 111 | |
| 112 | if (irq_status & EMIF_2B_ECC_ERR) { |
| 113 | err_addr = ti_edac_readl(edac, EMIF_2B_ECC_ERR_ADDR_LOG); |
| 114 | edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, |
| 115 | err_addr >> PAGE_SHIFT, |
| 116 | err_addr & ~PAGE_MASK, -1, 0, 0, 0, |
| 117 | mci->ctl_name, "2B"); |
| 118 | } |
| 119 | |
| 120 | if (irq_status & EMIF_WR_ECC_ERR) |
| 121 | edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, |
| 122 | 0, 0, -1, 0, 0, 0, |
| 123 | mci->ctl_name, "WR"); |
| 124 | |
| 125 | ti_edac_writel(edac, irq_status, EMIF_IRQ_STATUS); |
| 126 | |
| 127 | return IRQ_HANDLED; |
| 128 | } |
| 129 | |
| 130 | static void ti_edac_setup_dimm(struct mem_ctl_info *mci, u32 type) |
| 131 | { |
| 132 | struct dimm_info *dimm; |
| 133 | struct ti_edac *edac = mci->pvt_info; |
| 134 | int bits; |
| 135 | u32 val; |
| 136 | u32 memsize; |
| 137 | |
Robert Richter | bc9ad9e | 2019-11-06 09:33:02 +0000 | [diff] [blame] | 138 | dimm = edac_get_dimm(mci, 0, 0, 0); |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 139 | |
| 140 | val = ti_edac_readl(edac, EMIF_SDRAM_CONFIG); |
| 141 | |
| 142 | if (type == EMIF_TYPE_DRA7) { |
| 143 | bits = ((val & SDRAM_PAGESIZE_MASK) >> SDRAM_PAGESIZE_SHIFT) + 8; |
| 144 | bits += ((val & SDRAM_ROWSIZE_MASK) >> SDRAM_ROWSIZE_SHIFT) + 9; |
| 145 | bits += (val & SDRAM_IBANK_MASK) >> SDRAM_IBANK_SHIFT; |
| 146 | |
| 147 | if (val & SDRAM_NARROW_MODE_MASK) { |
| 148 | bits++; |
| 149 | dimm->dtype = DEV_X16; |
| 150 | } else { |
| 151 | bits += 2; |
| 152 | dimm->dtype = DEV_X32; |
| 153 | } |
| 154 | } else { |
| 155 | bits = 16; |
| 156 | bits += ((val & SDRAM_K2_PAGESIZE_MASK) >> |
| 157 | SDRAM_K2_PAGESIZE_SHIFT) + 8; |
| 158 | bits += (val & SDRAM_K2_IBANK_MASK) >> SDRAM_K2_IBANK_SHIFT; |
| 159 | bits += (val & SDRAM_K2_EBANK_MASK) >> SDRAM_K2_EBANK_SHIFT; |
| 160 | |
| 161 | val = (val & SDRAM_K2_NARROW_MODE_MASK) >> |
| 162 | SDRAM_K2_NARROW_MODE_SHIFT; |
| 163 | switch (val) { |
| 164 | case 0: |
| 165 | bits += 3; |
| 166 | dimm->dtype = DEV_X64; |
| 167 | break; |
| 168 | case 1: |
| 169 | bits += 2; |
| 170 | dimm->dtype = DEV_X32; |
| 171 | break; |
| 172 | case 2: |
| 173 | bits++; |
| 174 | dimm->dtype = DEV_X16; |
| 175 | break; |
| 176 | } |
| 177 | } |
| 178 | |
| 179 | memsize = 1 << bits; |
| 180 | |
| 181 | dimm->nr_pages = memsize >> PAGE_SHIFT; |
| 182 | dimm->grain = 4; |
| 183 | if ((val & SDRAM_TYPE_MASK) == SDRAM_TYPE_DDR2) |
| 184 | dimm->mtype = MEM_DDR2; |
| 185 | else |
| 186 | dimm->mtype = MEM_DDR3; |
| 187 | |
| 188 | val = ti_edac_readl(edac, EMIF_ECC_CTRL); |
| 189 | if (val & ECC_ENABLED) |
| 190 | dimm->edac_mode = EDAC_SECDED; |
| 191 | else |
| 192 | dimm->edac_mode = EDAC_NONE; |
| 193 | } |
| 194 | |
| 195 | static const struct of_device_id ti_edac_of_match[] = { |
| 196 | { .compatible = "ti,emif-keystone", .data = (void *)EMIF_TYPE_K2 }, |
| 197 | { .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 }, |
| 198 | {}, |
| 199 | }; |
Bixuan Cui | 0a37f32 | 2021-05-12 11:37:27 +0800 | [diff] [blame] | 200 | MODULE_DEVICE_TABLE(of, ti_edac_of_match); |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 201 | |
| 202 | static int _emif_get_id(struct device_node *node) |
| 203 | { |
| 204 | struct device_node *np; |
| 205 | const __be32 *addrp; |
| 206 | u32 addr, my_addr; |
| 207 | int my_id = 0; |
| 208 | |
| 209 | addrp = of_get_address(node, 0, NULL, NULL); |
| 210 | my_addr = (u32)of_translate_address(node, addrp); |
| 211 | |
| 212 | for_each_matching_node(np, ti_edac_of_match) { |
| 213 | if (np == node) |
| 214 | continue; |
| 215 | |
| 216 | addrp = of_get_address(np, 0, NULL, NULL); |
| 217 | addr = (u32)of_translate_address(np, addrp); |
| 218 | |
| 219 | edac_printk(KERN_INFO, EDAC_MOD_NAME, |
| 220 | "addr=%x, my_addr=%x\n", |
| 221 | addr, my_addr); |
| 222 | |
| 223 | if (addr < my_addr) |
| 224 | my_id++; |
| 225 | } |
| 226 | |
| 227 | return my_id; |
| 228 | } |
| 229 | |
| 230 | static int ti_edac_probe(struct platform_device *pdev) |
| 231 | { |
| 232 | int error_irq = 0, ret = -ENODEV; |
| 233 | struct device *dev = &pdev->dev; |
| 234 | struct resource *res; |
| 235 | void __iomem *reg; |
| 236 | struct mem_ctl_info *mci; |
| 237 | struct edac_mc_layer layers[1]; |
| 238 | const struct of_device_id *id; |
| 239 | struct ti_edac *edac; |
| 240 | int emif_id; |
| 241 | |
| 242 | id = of_match_device(ti_edac_of_match, &pdev->dev); |
| 243 | if (!id) |
| 244 | return -ENODEV; |
| 245 | |
| 246 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 247 | reg = devm_ioremap_resource(dev, res); |
Tang Bin | 0b6d4ab | 2021-08-11 19:26:26 +0800 | [diff] [blame] | 248 | if (IS_ERR(reg)) |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 249 | return PTR_ERR(reg); |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 250 | |
| 251 | layers[0].type = EDAC_MC_LAYER_ALL_MEM; |
| 252 | layers[0].size = 1; |
| 253 | |
| 254 | /* Allocate ID number for our EMIF controller */ |
| 255 | emif_id = _emif_get_id(pdev->dev.of_node); |
| 256 | if (emif_id < 0) |
| 257 | return -EINVAL; |
| 258 | |
| 259 | mci = edac_mc_alloc(emif_id, 1, layers, sizeof(*edac)); |
| 260 | if (!mci) |
| 261 | return -ENOMEM; |
| 262 | |
| 263 | mci->pdev = &pdev->dev; |
| 264 | edac = mci->pvt_info; |
| 265 | edac->reg = reg; |
| 266 | platform_set_drvdata(pdev, mci); |
| 267 | |
| 268 | mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2; |
| 269 | mci->edac_ctl_cap = EDAC_FLAG_SECDED | EDAC_FLAG_NONE; |
| 270 | mci->mod_name = EDAC_MOD_NAME; |
| 271 | mci->ctl_name = id->compatible; |
| 272 | mci->dev_name = dev_name(&pdev->dev); |
| 273 | |
| 274 | /* Setup memory layout */ |
| 275 | ti_edac_setup_dimm(mci, (u32)(id->data)); |
| 276 | |
| 277 | /* add EMIF ECC error handler */ |
| 278 | error_irq = platform_get_irq(pdev, 0); |
Krzysztof Kozlowski | 66077ad | 2020-08-27 09:07:43 +0200 | [diff] [blame] | 279 | if (error_irq < 0) { |
| 280 | ret = error_irq; |
Tero Kristo | 86a18ee | 2017-11-13 15:08:10 +0200 | [diff] [blame] | 281 | goto err; |
| 282 | } |
| 283 | |
| 284 | ret = devm_request_irq(dev, error_irq, ti_edac_isr, 0, |
| 285 | "emif-edac-irq", mci); |
| 286 | if (ret) { |
| 287 | edac_printk(KERN_ERR, EDAC_MOD_NAME, |
| 288 | "request_irq fail for EMIF EDAC irq\n"); |
| 289 | goto err; |
| 290 | } |
| 291 | |
| 292 | ret = edac_mc_add_mc(mci); |
| 293 | if (ret) { |
| 294 | edac_printk(KERN_ERR, EDAC_MOD_NAME, |
| 295 | "Failed to register mci: %d.\n", ret); |
| 296 | goto err; |
| 297 | } |
| 298 | |
| 299 | /* Generate an interrupt with each 1b error */ |
| 300 | ti_edac_writel(edac, 1 << EMIF_1B_ECC_ERR_THRSH_SHIFT, |
| 301 | EMIF_1B_ECC_ERR_THRSH); |
| 302 | |
| 303 | /* Enable interrupts */ |
| 304 | ti_edac_writel(edac, |
| 305 | EMIF_1B_ECC_ERR | EMIF_2B_ECC_ERR | EMIF_WR_ECC_ERR, |
| 306 | EMIF_IRQ_ENABLE_SET); |
| 307 | |
| 308 | return 0; |
| 309 | |
| 310 | err: |
| 311 | edac_mc_free(mci); |
| 312 | return ret; |
| 313 | } |
| 314 | |
| 315 | static int ti_edac_remove(struct platform_device *pdev) |
| 316 | { |
| 317 | struct mem_ctl_info *mci = platform_get_drvdata(pdev); |
| 318 | |
| 319 | edac_mc_del_mc(&pdev->dev); |
| 320 | edac_mc_free(mci); |
| 321 | |
| 322 | return 0; |
| 323 | } |
| 324 | |
| 325 | static struct platform_driver ti_edac_driver = { |
| 326 | .probe = ti_edac_probe, |
| 327 | .remove = ti_edac_remove, |
| 328 | .driver = { |
| 329 | .name = EDAC_MOD_NAME, |
| 330 | .of_match_table = ti_edac_of_match, |
| 331 | }, |
| 332 | }; |
| 333 | |
| 334 | module_platform_driver(ti_edac_driver); |
| 335 | |
| 336 | MODULE_AUTHOR("Texas Instruments Inc."); |
| 337 | MODULE_DESCRIPTION("EDAC Driver for Texas Instruments DDR3 MC"); |
| 338 | MODULE_LICENSE("GPL v2"); |