drivers/i2c/busses/i2c-ali1563.c

// SPDX-License-Identifier: GPL-2.0-only
/**
 *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
 *
 *	Copyright (C) 2004 Patrick Mochel
 *		      2005 Rudolf Marek <r.marek@assembler.cz>
 *
 *	The 1563 southbridge is deceptively similar to the 1533, with a
 *	few notable exceptions. One of those happens to be the fact they
 *	upgraded the i2c core to be 2.0 compliant, and happens to be almost
 *	identical to the i2c controller found in the Intel 801 south
 *	bridges.
 *
 *	This driver is based on a mix of the 15x3, 1535, and i801 drivers,
 *	with a little help from the ALi 1563 spec.
 */

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/acpi.h>

#define ALI1563_MAX_TIMEOUT	500
#define	ALI1563_SMBBA		0x80
#define ALI1563_SMB_IOEN	1
#define ALI1563_SMB_HOSTEN	2
#define ALI1563_SMB_IOSIZE	16

#define SMB_HST_STS	(ali1563_smba + 0)
#define SMB_HST_CNTL1	(ali1563_smba + 1)
#define SMB_HST_CNTL2	(ali1563_smba + 2)
#define SMB_HST_CMD	(ali1563_smba + 3)
#define SMB_HST_ADD	(ali1563_smba + 4)
#define SMB_HST_DAT0	(ali1563_smba + 5)
#define SMB_HST_DAT1	(ali1563_smba + 6)
#define SMB_BLK_DAT	(ali1563_smba + 7)

#define HST_STS_BUSY	0x01
#define HST_STS_INTR	0x02
#define HST_STS_DEVERR	0x04
#define HST_STS_BUSERR	0x08
#define HST_STS_FAIL	0x10
#define HST_STS_DONE	0x80
#define HST_STS_BAD	0x1c


#define HST_CNTL1_TIMEOUT	0x80
#define HST_CNTL1_LAST		0x40

#define HST_CNTL2_KILL		0x04
#define HST_CNTL2_START		0x40
#define HST_CNTL2_QUICK		0x00
#define HST_CNTL2_BYTE		0x01
#define HST_CNTL2_BYTE_DATA	0x02
#define HST_CNTL2_WORD_DATA	0x03
#define HST_CNTL2_BLOCK		0x05


#define HST_CNTL2_SIZEMASK	0x38

static struct pci_driver ali1563_pci_driver;
static unsigned short ali1563_smba;

static int ali1563_transaction(struct i2c_adapter *a, int size)
{
	u32 data;
	int timeout;
	int status = -EIO;

	dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
		inb_p(SMB_HST_DAT1));

	data = inb_p(SMB_HST_STS);
	if (data & HST_STS_BAD) {
		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
		outb_p(data | HST_STS_BAD, SMB_HST_STS);
		data = inb_p(SMB_HST_STS);
		if (data & HST_STS_BAD)
			return -EBUSY;
	}
	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);

	timeout = ALI1563_MAX_TIMEOUT;
	do {
		msleep(1);
	} while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);

	dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
		inb_p(SMB_HST_DAT1));

	if (timeout && !(data & HST_STS_BAD))
		return 0;

	if (!timeout) {
		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
		/* Issue 'kill' to host controller */
		outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
		data = inb_p(SMB_HST_STS);
		status = -ETIMEDOUT;
	}

	/* device error - no response, ignore the autodetection case */
	if (data & HST_STS_DEVERR) {
		if (size != HST_CNTL2_QUICK)
			dev_err(&a->dev, "Device error!\n");
		status = -ENXIO;
	}
	/* bus collision */
	if (data & HST_STS_BUSERR) {
		dev_err(&a->dev, "Bus collision!\n");
		/* Issue timeout, hoping it helps */
		outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
	}

	if (data & HST_STS_FAIL) {
		dev_err(&a->dev, "Cleaning fail after KILL!\n");
		outb_p(0x0, SMB_HST_CNTL2);
	}

	return status;
}

static int ali1563_block_start(struct i2c_adapter *a)
{
	u32 data;
	int timeout;
	int status = -EIO;

	dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
		inb_p(SMB_HST_DAT1));

	data = inb_p(SMB_HST_STS);
	if (data & HST_STS_BAD) {
		dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
		outb_p(data | HST_STS_BAD, SMB_HST_STS);
		data = inb_p(SMB_HST_STS);
		if (data & HST_STS_BAD)
			return -EBUSY;
	}

	/* Clear byte-ready bit */
	outb_p(data | HST_STS_DONE, SMB_HST_STS);

	/* Start transaction and wait for byte-ready bit to be set */
	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);

	timeout = ALI1563_MAX_TIMEOUT;
	do {
		msleep(1);
	} while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);

	dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
		inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
		inb_p(SMB_HST_DAT1));

	if (timeout && !(data & HST_STS_BAD))
		return 0;

	if (timeout == 0)
		status = -ETIMEDOUT;

	if (data & HST_STS_DEVERR)
		status = -ENXIO;

	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
		timeout ? "" : "Timeout ",
		data & HST_STS_FAIL ? "Transaction Failed " : "",
		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
		data & HST_STS_DEVERR ? "Device Error " : "",
		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
	return status;
}

static int ali1563_block(struct i2c_adapter *a,
			 union i2c_smbus_data *data, u8 rw)
{
	int i, len;
	int error = 0;

	/* Do we need this? */
	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);

	if (rw == I2C_SMBUS_WRITE) {
		len = data->block[0];
		if (len < 1)
			len = 1;
		else if (len > 32)
			len = 32;
		outb_p(len, SMB_HST_DAT0);
		outb_p(data->block[1], SMB_BLK_DAT);
	} else
		len = 32;

	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);

	for (i = 0; i < len; i++) {
		if (rw == I2C_SMBUS_WRITE) {
			outb_p(data->block[i + 1], SMB_BLK_DAT);
			error = ali1563_block_start(a);
			if (error)
				break;
		} else {
			error = ali1563_block_start(a);
			if (error)
				break;
			if (i == 0) {
				len = inb_p(SMB_HST_DAT0);
				if (len < 1)
					len = 1;
				else if (len > 32)
					len = 32;
			}
			data->block[i+1] = inb_p(SMB_BLK_DAT);
		}
	}
	/* Do we need this? */
	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
	return error;
}

static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
			  unsigned short flags, char rw, u8 cmd,
			  int size, union i2c_smbus_data *data)
{
	int error = 0;
	int timeout;
	u32 reg;

	for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
		reg = inb_p(SMB_HST_STS);
		if (!(reg & HST_STS_BUSY))
			break;
	}
	if (!timeout)
		dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
	outb_p(0xff, SMB_HST_STS);

	/* Map the size to what the chip understands */
	switch (size) {
	case I2C_SMBUS_QUICK:
		size = HST_CNTL2_QUICK;
		break;
	case I2C_SMBUS_BYTE:
		size = HST_CNTL2_BYTE;
		break;
	case I2C_SMBUS_BYTE_DATA:
		size = HST_CNTL2_BYTE_DATA;
		break;
	case I2C_SMBUS_WORD_DATA:
		size = HST_CNTL2_WORD_DATA;
		break;
	case I2C_SMBUS_BLOCK_DATA:
		size = HST_CNTL2_BLOCK;
		break;
	default:
		dev_warn(&a->dev, "Unsupported transaction %d\n", size);
		error = -EOPNOTSUPP;
		goto Done;
	}

	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
	       (size << 3), SMB_HST_CNTL2);

	/* Write the command register */

	switch (size) {
	case HST_CNTL2_BYTE:
		if (rw == I2C_SMBUS_WRITE)
			/* Beware it uses DAT0 register and not CMD! */
			outb_p(cmd, SMB_HST_DAT0);
		break;
	case HST_CNTL2_BYTE_DATA:
		outb_p(cmd, SMB_HST_CMD);
		if (rw == I2C_SMBUS_WRITE)
			outb_p(data->byte, SMB_HST_DAT0);
		break;
	case HST_CNTL2_WORD_DATA:
		outb_p(cmd, SMB_HST_CMD);
		if (rw == I2C_SMBUS_WRITE) {
			outb_p(data->word & 0xff, SMB_HST_DAT0);
			outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
		}
		break;
	case HST_CNTL2_BLOCK:
		outb_p(cmd, SMB_HST_CMD);
		error = ali1563_block(a, data, rw);
		goto Done;
	}

	error = ali1563_transaction(a, size);
	if (error)
		goto Done;

	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
		goto Done;

	switch (size) {
	case HST_CNTL2_BYTE:	/* Result put in SMBHSTDAT0 */
		data->byte = inb_p(SMB_HST_DAT0);
		break;
	case HST_CNTL2_BYTE_DATA:
		data->byte = inb_p(SMB_HST_DAT0);
		break;
	case HST_CNTL2_WORD_DATA:
		data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
		break;
	}
Done:
	return error;
}

static u32 ali1563_func(struct i2c_adapter *a)
{
	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
	    I2C_FUNC_SMBUS_BLOCK_DATA;
}


static int ali1563_setup(struct pci_dev *dev)
{
	u16 ctrl;

	pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);

	/* SMB I/O Base in high 12 bits and must be aligned with the
	 * size of the I/O space. */
	ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
	if (!ali1563_smba) {
		dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
		goto Err;
	}

	/* Check if device is enabled */
	if (!(ctrl & ALI1563_SMB_HOSTEN)) {
		dev_warn(&dev->dev, "Host Controller not enabled\n");
		goto Err;
	}
	if (!(ctrl & ALI1563_SMB_IOEN)) {
		dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
		pci_write_config_word(dev, ALI1563_SMBBA,
				      ctrl | ALI1563_SMB_IOEN);
		pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
		if (!(ctrl & ALI1563_SMB_IOEN)) {
			dev_err(&dev->dev,
				"I/O space still not enabled, giving up\n");
			goto Err;
		}
	}

	if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
			      ali1563_pci_driver.name))
		goto Err;

	if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
			    ali1563_pci_driver.name)) {
		dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
			ali1563_smba);
		goto Err;
	}
	dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);

	return 0;
Err:
	return -ENODEV;
}

static void ali1563_shutdown(struct pci_dev *dev)
{
	release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
}

static const struct i2c_algorithm ali1563_algorithm = {
	.smbus_xfer	= ali1563_access,
	.functionality	= ali1563_func,
};

static struct i2c_adapter ali1563_adapter = {
	.owner	= THIS_MODULE,
	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
	.algo	= &ali1563_algorithm,
};

static int ali1563_probe(struct pci_dev *dev,
			 const struct pci_device_id *id_table)
{
	int error;

	error = ali1563_setup(dev);
	if (error)
		goto exit;
	ali1563_adapter.dev.parent = &dev->dev;
	snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
		 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
	error = i2c_add_adapter(&ali1563_adapter);
	if (error)
		goto exit_shutdown;
	return 0;

exit_shutdown:
	ali1563_shutdown(dev);
exit:
	dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
	return error;
}

static void ali1563_remove(struct pci_dev *dev)
{
	i2c_del_adapter(&ali1563_adapter);
	ali1563_shutdown(dev);
}

static const struct pci_device_id ali1563_id_table[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
	{},
};

MODULE_DEVICE_TABLE(pci, ali1563_id_table);

static struct pci_driver ali1563_pci_driver = {
	.name		= "ali1563_smbus",
	.id_table	= ali1563_id_table,
	.probe		= ali1563_probe,
	.remove		= ali1563_remove,
};

module_pci_driver(ali1563_pci_driver);

MODULE_LICENSE("GPL");