Min Li | a1867f8 | 2021-06-18 12:37:12 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * I2C driver for Renesas Synchronization Management Unit (SMU) devices. |
| 4 | * |
| 5 | * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company. |
| 6 | */ |
| 7 | |
| 8 | #include <linux/i2c.h> |
| 9 | #include <linux/init.h> |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/mfd/core.h> |
| 12 | #include <linux/mfd/rsmu.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/of.h> |
| 15 | #include <linux/regmap.h> |
| 16 | #include <linux/slab.h> |
| 17 | |
| 18 | #include "rsmu.h" |
| 19 | |
| 20 | /* |
| 21 | * 16-bit register address: the lower 8 bits of the register address come |
| 22 | * from the offset addr byte and the upper 8 bits come from the page register. |
| 23 | */ |
| 24 | #define RSMU_CM_PAGE_ADDR 0xFD |
| 25 | #define RSMU_CM_PAGE_WINDOW 256 |
| 26 | |
| 27 | /* |
| 28 | * 15-bit register address: the lower 7 bits of the register address come |
| 29 | * from the offset addr byte and the upper 8 bits come from the page register. |
| 30 | */ |
| 31 | #define RSMU_SABRE_PAGE_ADDR 0x7F |
| 32 | #define RSMU_SABRE_PAGE_WINDOW 128 |
| 33 | |
| 34 | static const struct regmap_range_cfg rsmu_cm_range_cfg[] = { |
| 35 | { |
| 36 | .range_min = 0, |
| 37 | .range_max = 0xD000, |
| 38 | .selector_reg = RSMU_CM_PAGE_ADDR, |
| 39 | .selector_mask = 0xFF, |
| 40 | .selector_shift = 0, |
| 41 | .window_start = 0, |
| 42 | .window_len = RSMU_CM_PAGE_WINDOW, |
| 43 | } |
| 44 | }; |
| 45 | |
| 46 | static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = { |
| 47 | { |
| 48 | .range_min = 0, |
| 49 | .range_max = 0x400, |
| 50 | .selector_reg = RSMU_SABRE_PAGE_ADDR, |
| 51 | .selector_mask = 0xFF, |
| 52 | .selector_shift = 0, |
| 53 | .window_start = 0, |
| 54 | .window_len = RSMU_SABRE_PAGE_WINDOW, |
| 55 | } |
| 56 | }; |
| 57 | |
| 58 | static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg) |
| 59 | { |
| 60 | switch (reg) { |
| 61 | case RSMU_CM_PAGE_ADDR: |
| 62 | return false; |
| 63 | default: |
| 64 | return true; |
| 65 | } |
| 66 | } |
| 67 | |
| 68 | static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg) |
| 69 | { |
| 70 | switch (reg) { |
| 71 | case RSMU_SABRE_PAGE_ADDR: |
| 72 | return false; |
| 73 | default: |
| 74 | return true; |
| 75 | } |
| 76 | } |
| 77 | |
| 78 | static const struct regmap_config rsmu_cm_regmap_config = { |
| 79 | .reg_bits = 8, |
| 80 | .val_bits = 8, |
| 81 | .max_register = 0xD000, |
| 82 | .ranges = rsmu_cm_range_cfg, |
| 83 | .num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg), |
| 84 | .volatile_reg = rsmu_cm_volatile_reg, |
| 85 | .cache_type = REGCACHE_RBTREE, |
| 86 | .can_multi_write = true, |
| 87 | }; |
| 88 | |
| 89 | static const struct regmap_config rsmu_sabre_regmap_config = { |
| 90 | .reg_bits = 8, |
| 91 | .val_bits = 8, |
| 92 | .max_register = 0x400, |
| 93 | .ranges = rsmu_sabre_range_cfg, |
| 94 | .num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg), |
| 95 | .volatile_reg = rsmu_sabre_volatile_reg, |
| 96 | .cache_type = REGCACHE_RBTREE, |
| 97 | .can_multi_write = true, |
| 98 | }; |
| 99 | |
| 100 | static const struct regmap_config rsmu_sl_regmap_config = { |
| 101 | .reg_bits = 16, |
| 102 | .val_bits = 8, |
| 103 | .reg_format_endian = REGMAP_ENDIAN_BIG, |
| 104 | .max_register = 0x339, |
| 105 | .cache_type = REGCACHE_NONE, |
| 106 | .can_multi_write = true, |
| 107 | }; |
| 108 | |
| 109 | static int rsmu_i2c_probe(struct i2c_client *client, |
| 110 | const struct i2c_device_id *id) |
| 111 | { |
| 112 | const struct regmap_config *cfg; |
| 113 | struct rsmu_ddata *rsmu; |
| 114 | int ret; |
| 115 | |
| 116 | rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL); |
| 117 | if (!rsmu) |
| 118 | return -ENOMEM; |
| 119 | |
| 120 | i2c_set_clientdata(client, rsmu); |
| 121 | |
| 122 | rsmu->dev = &client->dev; |
| 123 | rsmu->type = (enum rsmu_type)id->driver_data; |
| 124 | |
| 125 | switch (rsmu->type) { |
| 126 | case RSMU_CM: |
| 127 | cfg = &rsmu_cm_regmap_config; |
| 128 | break; |
| 129 | case RSMU_SABRE: |
| 130 | cfg = &rsmu_sabre_regmap_config; |
| 131 | break; |
| 132 | case RSMU_SL: |
| 133 | cfg = &rsmu_sl_regmap_config; |
| 134 | break; |
| 135 | default: |
| 136 | dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type); |
| 137 | return -ENODEV; |
| 138 | } |
| 139 | rsmu->regmap = devm_regmap_init_i2c(client, cfg); |
| 140 | if (IS_ERR(rsmu->regmap)) { |
| 141 | ret = PTR_ERR(rsmu->regmap); |
| 142 | dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret); |
| 143 | return ret; |
| 144 | } |
| 145 | |
| 146 | return rsmu_core_init(rsmu); |
| 147 | } |
| 148 | |
| 149 | static int rsmu_i2c_remove(struct i2c_client *client) |
| 150 | { |
| 151 | struct rsmu_ddata *rsmu = i2c_get_clientdata(client); |
| 152 | |
| 153 | rsmu_core_exit(rsmu); |
| 154 | |
| 155 | return 0; |
| 156 | } |
| 157 | |
| 158 | static const struct i2c_device_id rsmu_i2c_id[] = { |
| 159 | { "8a34000", RSMU_CM }, |
| 160 | { "8a34001", RSMU_CM }, |
| 161 | { "82p33810", RSMU_SABRE }, |
| 162 | { "82p33811", RSMU_SABRE }, |
| 163 | { "8v19n850", RSMU_SL }, |
| 164 | { "8v19n851", RSMU_SL }, |
| 165 | {} |
| 166 | }; |
| 167 | MODULE_DEVICE_TABLE(i2c, rsmu_i2c_id); |
| 168 | |
| 169 | static const struct of_device_id rsmu_i2c_of_match[] = { |
| 170 | { .compatible = "idt,8a34000", .data = (void *)RSMU_CM }, |
| 171 | { .compatible = "idt,8a34001", .data = (void *)RSMU_CM }, |
| 172 | { .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE }, |
| 173 | { .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE }, |
| 174 | { .compatible = "idt,8v19n850", .data = (void *)RSMU_SL }, |
| 175 | { .compatible = "idt,8v19n851", .data = (void *)RSMU_SL }, |
| 176 | {} |
| 177 | }; |
| 178 | MODULE_DEVICE_TABLE(of, rsmu_i2c_of_match); |
| 179 | |
| 180 | static struct i2c_driver rsmu_i2c_driver = { |
| 181 | .driver = { |
| 182 | .name = "rsmu-i2c", |
| 183 | .of_match_table = of_match_ptr(rsmu_i2c_of_match), |
| 184 | }, |
| 185 | .probe = rsmu_i2c_probe, |
| 186 | .remove = rsmu_i2c_remove, |
| 187 | .id_table = rsmu_i2c_id, |
| 188 | }; |
| 189 | |
| 190 | static int __init rsmu_i2c_init(void) |
| 191 | { |
| 192 | return i2c_add_driver(&rsmu_i2c_driver); |
| 193 | } |
| 194 | subsys_initcall(rsmu_i2c_init); |
| 195 | |
| 196 | static void __exit rsmu_i2c_exit(void) |
| 197 | { |
| 198 | i2c_del_driver(&rsmu_i2c_driver); |
| 199 | } |
| 200 | module_exit(rsmu_i2c_exit); |
| 201 | |
| 202 | MODULE_DESCRIPTION("Renesas SMU I2C driver"); |
| 203 | MODULE_LICENSE("GPL"); |