Andres Salomon | c30d7d2 | 2009-12-14 18:00:38 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * Clock event driver for the CS5535/CS5536 |
| 3 | * |
| 4 | * Copyright (C) 2006, Advanced Micro Devices, Inc. |
| 5 | * Copyright (C) 2007 Andres Salomon <dilinger@debian.org> |
| 6 | * Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of version 2 of the GNU General Public License |
| 10 | * as published by the Free Software Foundation. |
| 11 | * |
| 12 | * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/irq.h> |
| 17 | #include <linux/interrupt.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/cs5535.h> |
| 20 | #include <linux/clockchips.h> |
| 21 | |
| 22 | #define DRV_NAME "cs5535-clockevt" |
| 23 | |
| 24 | static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ; |
| 25 | module_param_named(irq, timer_irq, int, 0644); |
| 26 | MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks."); |
| 27 | |
| 28 | /* |
| 29 | * We are using the 32.768kHz input clock - it's the only one that has the |
| 30 | * ranges we find desirable. The following table lists the suitable |
| 31 | * divisors and the associated Hz, minimum interval and the maximum interval: |
| 32 | * |
| 33 | * Divisor Hz Min Delta (s) Max Delta (s) |
| 34 | * 1 32768 .00048828125 2.000 |
| 35 | * 2 16384 .0009765625 4.000 |
| 36 | * 4 8192 .001953125 8.000 |
| 37 | * 8 4096 .00390625 16.000 |
| 38 | * 16 2048 .0078125 32.000 |
| 39 | * 32 1024 .015625 64.000 |
| 40 | * 64 512 .03125 128.000 |
| 41 | * 128 256 .0625 256.000 |
| 42 | * 256 128 .125 512.000 |
| 43 | */ |
| 44 | |
| 45 | static unsigned int cs5535_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; |
| 46 | static struct cs5535_mfgpt_timer *cs5535_event_clock; |
| 47 | |
| 48 | /* Selected from the table above */ |
| 49 | |
| 50 | #define MFGPT_DIVISOR 16 |
| 51 | #define MFGPT_SCALE 4 /* divisor = 2^(scale) */ |
| 52 | #define MFGPT_HZ (32768 / MFGPT_DIVISOR) |
| 53 | #define MFGPT_PERIODIC (MFGPT_HZ / HZ) |
| 54 | |
| 55 | /* |
| 56 | * The MFPGT timers on the CS5536 provide us with suitable timers to use |
| 57 | * as clock event sources - not as good as a HPET or APIC, but certainly |
| 58 | * better than the PIT. This isn't a general purpose MFGPT driver, but |
| 59 | * a simplified one designed specifically to act as a clock event source. |
| 60 | * For full details about the MFGPT, please consult the CS5536 data sheet. |
| 61 | */ |
| 62 | |
| 63 | static void disable_timer(struct cs5535_mfgpt_timer *timer) |
| 64 | { |
| 65 | /* avoid races by clearing CMP1 and CMP2 unconditionally */ |
| 66 | cs5535_mfgpt_write(timer, MFGPT_REG_SETUP, |
| 67 | (uint16_t) ~MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP1 | |
| 68 | MFGPT_SETUP_CMP2); |
| 69 | } |
| 70 | |
| 71 | static void start_timer(struct cs5535_mfgpt_timer *timer, uint16_t delta) |
| 72 | { |
| 73 | cs5535_mfgpt_write(timer, MFGPT_REG_CMP2, delta); |
| 74 | cs5535_mfgpt_write(timer, MFGPT_REG_COUNTER, 0); |
| 75 | |
| 76 | cs5535_mfgpt_write(timer, MFGPT_REG_SETUP, |
| 77 | MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); |
| 78 | } |
| 79 | |
| 80 | static void mfgpt_set_mode(enum clock_event_mode mode, |
| 81 | struct clock_event_device *evt) |
| 82 | { |
| 83 | disable_timer(cs5535_event_clock); |
| 84 | |
| 85 | if (mode == CLOCK_EVT_MODE_PERIODIC) |
| 86 | start_timer(cs5535_event_clock, MFGPT_PERIODIC); |
| 87 | |
| 88 | cs5535_tick_mode = mode; |
| 89 | } |
| 90 | |
| 91 | static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) |
| 92 | { |
| 93 | start_timer(cs5535_event_clock, delta); |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | static struct clock_event_device cs5535_clockevent = { |
| 98 | .name = DRV_NAME, |
| 99 | .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| 100 | .set_mode = mfgpt_set_mode, |
| 101 | .set_next_event = mfgpt_next_event, |
| 102 | .rating = 250, |
| 103 | .cpumask = cpu_all_mask, |
| 104 | .shift = 32 |
| 105 | }; |
| 106 | |
| 107 | static irqreturn_t mfgpt_tick(int irq, void *dev_id) |
| 108 | { |
| 109 | uint16_t val = cs5535_mfgpt_read(cs5535_event_clock, MFGPT_REG_SETUP); |
| 110 | |
| 111 | /* See if the interrupt was for us */ |
| 112 | if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1))) |
| 113 | return IRQ_NONE; |
| 114 | |
| 115 | /* Turn off the clock (and clear the event) */ |
| 116 | disable_timer(cs5535_event_clock); |
| 117 | |
| 118 | if (cs5535_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) |
| 119 | return IRQ_HANDLED; |
| 120 | |
| 121 | /* Clear the counter */ |
| 122 | cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_COUNTER, 0); |
| 123 | |
| 124 | /* Restart the clock in periodic mode */ |
| 125 | |
| 126 | if (cs5535_tick_mode == CLOCK_EVT_MODE_PERIODIC) |
| 127 | cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, |
| 128 | MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); |
| 129 | |
| 130 | cs5535_clockevent.event_handler(&cs5535_clockevent); |
| 131 | return IRQ_HANDLED; |
| 132 | } |
| 133 | |
| 134 | static struct irqaction mfgptirq = { |
| 135 | .handler = mfgpt_tick, |
| 136 | .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, |
| 137 | .name = DRV_NAME, |
| 138 | }; |
| 139 | |
| 140 | static int __init cs5535_mfgpt_init(void) |
| 141 | { |
| 142 | struct cs5535_mfgpt_timer *timer; |
| 143 | int ret; |
| 144 | uint16_t val; |
| 145 | |
| 146 | timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); |
| 147 | if (!timer) { |
| 148 | printk(KERN_ERR DRV_NAME ": Could not allocate MFPGT timer\n"); |
| 149 | return -ENODEV; |
| 150 | } |
| 151 | cs5535_event_clock = timer; |
| 152 | |
| 153 | /* Set up the IRQ on the MFGPT side */ |
| 154 | if (cs5535_mfgpt_setup_irq(timer, MFGPT_CMP2, &timer_irq)) { |
| 155 | printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n", |
| 156 | timer_irq); |
| 157 | return -EIO; |
| 158 | } |
| 159 | |
| 160 | /* And register it with the kernel */ |
| 161 | ret = setup_irq(timer_irq, &mfgptirq); |
| 162 | if (ret) { |
| 163 | printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n"); |
| 164 | goto err; |
| 165 | } |
| 166 | |
| 167 | /* Set the clock scale and enable the event mode for CMP2 */ |
| 168 | val = MFGPT_SCALE | (3 << 8); |
| 169 | |
| 170 | cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val); |
| 171 | |
| 172 | /* Set up the clock event */ |
| 173 | cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, |
| 174 | cs5535_clockevent.shift); |
| 175 | cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF, |
| 176 | &cs5535_clockevent); |
| 177 | cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, |
| 178 | &cs5535_clockevent); |
| 179 | |
| 180 | printk(KERN_INFO DRV_NAME |
| 181 | ": Registering MFGPT timer as a clock event, using IRQ %d\n", |
| 182 | timer_irq); |
| 183 | clockevents_register_device(&cs5535_clockevent); |
| 184 | |
| 185 | return 0; |
| 186 | |
| 187 | err: |
| 188 | cs5535_mfgpt_release_irq(cs5535_event_clock, MFGPT_CMP2, &timer_irq); |
| 189 | printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n"); |
| 190 | return -EIO; |
| 191 | } |
| 192 | |
| 193 | module_init(cs5535_mfgpt_init); |
| 194 | |
| 195 | MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>"); |
| 196 | MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver"); |
| 197 | MODULE_LICENSE("GPL"); |