| Yunus Bas | d3af422 | 2021-12-16 09:41:06 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2018 PHYTEC Messtechnik |
| 4 | * Author: Christian Hemp <c.hemp@phytec.de> |
| 5 | */ |
| 6 | |
| 7 | / { |
| 8 | display: display0 { |
| 9 | #address-cells = <1>; |
| 10 | #size-cells = <0>; |
| 11 | compatible = "fsl,imx-parallel-display"; |
| 12 | pinctrl-names = "default"; |
| 13 | pinctrl-0 = <&pinctrl_disp0>; |
| 14 | interface-pix-fmt = "rgb24"; |
| 15 | status = "disabled"; |
| 16 | |
| 17 | port@0 { |
| 18 | reg = <0>; |
| 19 | |
| 20 | display0_in: endpoint { |
| 21 | remote-endpoint = <&ipu1_di0_disp0>; |
| 22 | }; |
| 23 | }; |
| 24 | |
| 25 | port@1 { |
| 26 | reg = <1>; |
| 27 | |
| 28 | display0_out: endpoint { |
| 29 | remote-endpoint = <&peb_panel_lcd_in>; |
| 30 | }; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | panel-lcd { |
| 35 | compatible = "edt,etm0700g0edh6"; |
| 36 | pinctrl-names = "default"; |
| 37 | pinctrl-0 = <&pinctrl_disp0_pwr>; |
| 38 | power-supply = <®_display>; |
| 39 | enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 40 | backlight = <&backlight>; |
| 41 | status = "disabled"; |
| 42 | |
| 43 | port { |
| 44 | peb_panel_lcd_in: endpoint { |
| 45 | remote-endpoint = <&display0_out>; |
| 46 | }; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | reg_display: regulator-peb-display { |
| 51 | compatible = "regulator-fixed"; |
| 52 | regulator-name = "peb-display"; |
| 53 | regulator-min-microvolt = <3300000>; |
| 54 | regulator-max-microvolt = <3300000>; |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | &i2c1 { |
| 59 | edt_ft5x06: touchscreen@38 { |
| 60 | compatible = "edt,edt-ft5406"; |
| 61 | pinctrl-names = "default"; |
| 62 | pinctrl-0 = <&pinctrl_edt_ft5x06>; |
| 63 | reg = <0x38>; |
| 64 | interrupt-parent = <&gpio3>; |
| 65 | interrupts = <2 IRQ_TYPE_NONE>; |
| 66 | status = "disabled"; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | &ipu1_di0_disp0 { |
| 71 | remote-endpoint = <&display0_in>; |
| 72 | }; |
| 73 | |
| 74 | &iomuxc { |
| 75 | pinctrl_disp0: disp0grp { |
| 76 | fsl,pins = < |
| 77 | MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 |
| 78 | MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 |
| 79 | MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 |
| 80 | MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x1b080 |
| 81 | MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 |
| 82 | MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 |
| 83 | MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 |
| 84 | MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 |
| 85 | MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 |
| 86 | MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 |
| 87 | MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 |
| 88 | MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 |
| 89 | MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 |
| 90 | MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 |
| 91 | MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 |
| 92 | MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 |
| 93 | MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 |
| 94 | MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 |
| 95 | MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 |
| 96 | MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 |
| 97 | MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 |
| 98 | MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 |
| 99 | MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 |
| 100 | MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 |
| 101 | MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 |
| 102 | MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 |
| 103 | MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 |
| 104 | MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 |
| 105 | >; |
| 106 | }; |
| 107 | |
| 108 | pinctrl_disp0_pwr: disp0pwrgrp { |
| 109 | fsl,pins = < |
| 110 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 |
| 111 | >; |
| 112 | }; |
| 113 | |
| 114 | pinctrl_edt_ft5x06: edtft5x06grp { |
| 115 | fsl,pins = < |
| 116 | MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0xb0b1 |
| 117 | >; |
| 118 | }; |
| 119 | }; |