Thomas Gleixner | 9c92ab6 | 2019-05-29 07:17:56 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 2 | /* |
| 3 | * Dove thermal sensor driver |
| 4 | * |
| 5 | * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 6 | */ |
| 7 | #include <linux/device.h> |
| 8 | #include <linux/err.h> |
| 9 | #include <linux/io.h> |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/of.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/thermal.h> |
| 15 | |
| 16 | #define DOVE_THERMAL_TEMP_OFFSET 1 |
| 17 | #define DOVE_THERMAL_TEMP_MASK 0x1FF |
| 18 | |
| 19 | /* Dove Thermal Manager Control and Status Register */ |
| 20 | #define PMU_TM_DISABLE_OFFS 0 |
| 21 | #define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS) |
| 22 | |
| 23 | /* Dove Theraml Diode Control 0 Register */ |
| 24 | #define PMU_TDC0_SW_RST_MASK (0x1 << 1) |
| 25 | #define PMU_TDC0_SEL_VCAL_OFFS 5 |
| 26 | #define PMU_TDC0_SEL_VCAL_MASK (0x3 << PMU_TDC0_SEL_VCAL_OFFS) |
| 27 | #define PMU_TDC0_REF_CAL_CNT_OFFS 11 |
| 28 | #define PMU_TDC0_REF_CAL_CNT_MASK (0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS) |
| 29 | #define PMU_TDC0_AVG_NUM_OFFS 25 |
| 30 | #define PMU_TDC0_AVG_NUM_MASK (0x7 << PMU_TDC0_AVG_NUM_OFFS) |
| 31 | |
| 32 | /* Dove Thermal Diode Control 1 Register */ |
| 33 | #define PMU_TEMP_DIOD_CTRL1_REG 0x04 |
| 34 | #define PMU_TDC1_TEMP_VALID_MASK (0x1 << 10) |
| 35 | |
| 36 | /* Dove Thermal Sensor Dev Structure */ |
| 37 | struct dove_thermal_priv { |
| 38 | void __iomem *sensor; |
| 39 | void __iomem *control; |
| 40 | }; |
| 41 | |
| 42 | static int dove_init_sensor(const struct dove_thermal_priv *priv) |
| 43 | { |
| 44 | u32 reg; |
| 45 | u32 i; |
| 46 | |
| 47 | /* Configure the Diode Control Register #0 */ |
| 48 | reg = readl_relaxed(priv->control); |
| 49 | |
| 50 | /* Use average of 2 */ |
| 51 | reg &= ~PMU_TDC0_AVG_NUM_MASK; |
| 52 | reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS); |
| 53 | |
| 54 | /* Reference calibration value */ |
| 55 | reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; |
| 56 | reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS); |
| 57 | |
| 58 | /* Set the high level reference for calibration */ |
| 59 | reg &= ~PMU_TDC0_SEL_VCAL_MASK; |
| 60 | reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS); |
| 61 | writel(reg, priv->control); |
| 62 | |
| 63 | /* Reset the sensor */ |
| 64 | reg = readl_relaxed(priv->control); |
| 65 | writel((reg | PMU_TDC0_SW_RST_MASK), priv->control); |
| 66 | writel(reg, priv->control); |
| 67 | |
| 68 | /* Enable the sensor */ |
| 69 | reg = readl_relaxed(priv->sensor); |
| 70 | reg &= ~PMU_TM_DISABLE_MASK; |
| 71 | writel(reg, priv->sensor); |
| 72 | |
| 73 | /* Poll the sensor for the first reading */ |
| 74 | for (i = 0; i < 1000000; i++) { |
| 75 | reg = readl_relaxed(priv->sensor); |
| 76 | if (reg & DOVE_THERMAL_TEMP_MASK) |
| 77 | break; |
| 78 | } |
| 79 | |
| 80 | if (i == 1000000) |
| 81 | return -EIO; |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | static int dove_get_temp(struct thermal_zone_device *thermal, |
Sascha Hauer | 17e8351 | 2015-07-24 08:12:54 +0200 | [diff] [blame] | 87 | int *temp) |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 88 | { |
| 89 | unsigned long reg; |
| 90 | struct dove_thermal_priv *priv = thermal->devdata; |
| 91 | |
| 92 | /* Valid check */ |
| 93 | reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG); |
| 94 | if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) { |
| 95 | dev_err(&thermal->device, |
| 96 | "Temperature sensor reading not valid\n"); |
| 97 | return -EIO; |
| 98 | } |
| 99 | |
| 100 | /* |
Ezequiel Garcia | 2fd1db8 | 2013-03-22 09:23:03 -0300 | [diff] [blame] | 101 | * Calculate temperature. According to Marvell internal |
| 102 | * documentation the formula for this is: |
| 103 | * Celsius = (322-reg)/1.3625 |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 104 | */ |
| 105 | reg = readl_relaxed(priv->sensor); |
| 106 | reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK; |
Ezequiel Garcia | 2fd1db8 | 2013-03-22 09:23:03 -0300 | [diff] [blame] | 107 | *temp = ((3220000000UL - (10000000UL * reg)) / 13625); |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 108 | |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static struct thermal_zone_device_ops ops = { |
| 113 | .get_temp = dove_get_temp, |
| 114 | }; |
| 115 | |
| 116 | static const struct of_device_id dove_thermal_id_table[] = { |
| 117 | { .compatible = "marvell,dove-thermal" }, |
| 118 | {} |
| 119 | }; |
| 120 | |
| 121 | static int dove_thermal_probe(struct platform_device *pdev) |
| 122 | { |
| 123 | struct thermal_zone_device *thermal = NULL; |
| 124 | struct dove_thermal_priv *priv; |
| 125 | struct resource *res; |
| 126 | int ret; |
| 127 | |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 128 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| 129 | if (!priv) |
| 130 | return -ENOMEM; |
| 131 | |
Wolfram Sang | c28f692 | 2013-05-10 08:17:11 +0000 | [diff] [blame] | 132 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
Sachin Kamat | 6bc51b6 | 2013-03-04 06:45:32 +0000 | [diff] [blame] | 133 | priv->sensor = devm_ioremap_resource(&pdev->dev, res); |
| 134 | if (IS_ERR(priv->sensor)) |
| 135 | return PTR_ERR(priv->sensor); |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 136 | |
| 137 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
Sachin Kamat | 6bc51b6 | 2013-03-04 06:45:32 +0000 | [diff] [blame] | 138 | priv->control = devm_ioremap_resource(&pdev->dev, res); |
| 139 | if (IS_ERR(priv->control)) |
| 140 | return PTR_ERR(priv->control); |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 141 | |
| 142 | ret = dove_init_sensor(priv); |
| 143 | if (ret) { |
| 144 | dev_err(&pdev->dev, "Failed to initialize sensor\n"); |
| 145 | return ret; |
| 146 | } |
| 147 | |
| 148 | thermal = thermal_zone_device_register("dove_thermal", 0, 0, |
| 149 | priv, &ops, NULL, 0, 0); |
| 150 | if (IS_ERR(thermal)) { |
| 151 | dev_err(&pdev->dev, |
| 152 | "Failed to register thermal zone device\n"); |
| 153 | return PTR_ERR(thermal); |
| 154 | } |
| 155 | |
Andrzej Pietrasiewicz | bbcf90c | 2020-06-29 14:29:22 +0200 | [diff] [blame] | 156 | ret = thermal_zone_device_enable(thermal); |
| 157 | if (ret) { |
| 158 | thermal_zone_device_unregister(thermal); |
| 159 | return ret; |
| 160 | } |
| 161 | |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 162 | platform_set_drvdata(pdev, thermal); |
| 163 | |
| 164 | return 0; |
| 165 | } |
| 166 | |
| 167 | static int dove_thermal_exit(struct platform_device *pdev) |
| 168 | { |
| 169 | struct thermal_zone_device *dove_thermal = |
| 170 | platform_get_drvdata(pdev); |
| 171 | |
| 172 | thermal_zone_device_unregister(dove_thermal); |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 173 | |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | MODULE_DEVICE_TABLE(of, dove_thermal_id_table); |
| 178 | |
| 179 | static struct platform_driver dove_thermal_driver = { |
| 180 | .probe = dove_thermal_probe, |
| 181 | .remove = dove_thermal_exit, |
| 182 | .driver = { |
| 183 | .name = "dove_thermal", |
Sachin Kamat | e0d68af | 2013-05-16 10:28:09 +0000 | [diff] [blame] | 184 | .of_match_table = dove_thermal_id_table, |
Andrew Lunn | 74ffa64 | 2013-02-06 06:35:26 +0000 | [diff] [blame] | 185 | }, |
| 186 | }; |
| 187 | |
| 188 | module_platform_driver(dove_thermal_driver); |
| 189 | |
| 190 | MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); |
| 191 | MODULE_DESCRIPTION("Dove thermal driver"); |
| 192 | MODULE_LICENSE("GPL"); |