Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // |
| 3 | // SY8827N regulator driver |
| 4 | // |
| 5 | // Copyright (C) 2020 Synaptics Incorporated |
| 6 | // |
| 7 | // Author: Jisheng Zhang <jszhang@kernel.org> |
| 8 | |
| 9 | #include <linux/gpio/consumer.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/i2c.h> |
| 12 | #include <linux/of_device.h> |
| 13 | #include <linux/regmap.h> |
| 14 | #include <linux/regulator/driver.h> |
| 15 | #include <linux/regulator/of_regulator.h> |
| 16 | |
| 17 | #define SY8827N_VSEL0 0 |
| 18 | #define SY8827N_BUCK_EN (1 << 7) |
| 19 | #define SY8827N_MODE (1 << 6) |
| 20 | #define SY8827N_VSEL1 1 |
| 21 | #define SY8827N_CTRL 2 |
Jisheng Zhang | 6bdd1c6 | 2021-08-03 16:52:11 +0800 | [diff] [blame] | 22 | #define SY8827N_ID1 3 |
| 23 | #define SY8827N_ID2 4 |
| 24 | #define SY8827N_PGOOD 5 |
| 25 | #define SY8827N_MAX (SY8827N_PGOOD + 1) |
Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 26 | |
| 27 | #define SY8827N_NVOLTAGES 64 |
| 28 | #define SY8827N_VSELMIN 600000 |
| 29 | #define SY8827N_VSELSTEP 12500 |
| 30 | |
| 31 | struct sy8827n_device_info { |
| 32 | struct device *dev; |
| 33 | struct regulator_desc desc; |
| 34 | struct regulator_init_data *regulator; |
| 35 | struct gpio_desc *en_gpio; |
| 36 | unsigned int vsel_reg; |
| 37 | }; |
| 38 | |
| 39 | static int sy8827n_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| 40 | { |
| 41 | struct sy8827n_device_info *di = rdev_get_drvdata(rdev); |
| 42 | |
| 43 | switch (mode) { |
| 44 | case REGULATOR_MODE_FAST: |
| 45 | regmap_update_bits(rdev->regmap, di->vsel_reg, |
| 46 | SY8827N_MODE, SY8827N_MODE); |
| 47 | break; |
| 48 | case REGULATOR_MODE_NORMAL: |
| 49 | regmap_update_bits(rdev->regmap, di->vsel_reg, |
| 50 | SY8827N_MODE, 0); |
| 51 | break; |
| 52 | default: |
| 53 | return -EINVAL; |
| 54 | } |
| 55 | return 0; |
| 56 | } |
| 57 | |
| 58 | static unsigned int sy8827n_get_mode(struct regulator_dev *rdev) |
| 59 | { |
| 60 | struct sy8827n_device_info *di = rdev_get_drvdata(rdev); |
| 61 | u32 val; |
| 62 | int ret = 0; |
| 63 | |
| 64 | ret = regmap_read(rdev->regmap, di->vsel_reg, &val); |
| 65 | if (ret < 0) |
| 66 | return ret; |
| 67 | if (val & SY8827N_MODE) |
| 68 | return REGULATOR_MODE_FAST; |
| 69 | else |
| 70 | return REGULATOR_MODE_NORMAL; |
| 71 | } |
| 72 | |
| 73 | static const struct regulator_ops sy8827n_regulator_ops = { |
| 74 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 75 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 76 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 77 | .map_voltage = regulator_map_voltage_linear, |
| 78 | .list_voltage = regulator_list_voltage_linear, |
| 79 | .enable = regulator_enable_regmap, |
| 80 | .disable = regulator_disable_regmap, |
| 81 | .is_enabled = regulator_is_enabled_regmap, |
| 82 | .set_mode = sy8827n_set_mode, |
| 83 | .get_mode = sy8827n_get_mode, |
| 84 | }; |
| 85 | |
| 86 | static int sy8827n_regulator_register(struct sy8827n_device_info *di, |
| 87 | struct regulator_config *config) |
| 88 | { |
| 89 | struct regulator_desc *rdesc = &di->desc; |
| 90 | struct regulator_dev *rdev; |
| 91 | |
| 92 | rdesc->name = "sy8827n-reg"; |
| 93 | rdesc->supply_name = "vin"; |
| 94 | rdesc->ops = &sy8827n_regulator_ops; |
| 95 | rdesc->type = REGULATOR_VOLTAGE; |
| 96 | rdesc->n_voltages = SY8827N_NVOLTAGES; |
| 97 | rdesc->enable_reg = di->vsel_reg; |
| 98 | rdesc->enable_mask = SY8827N_BUCK_EN; |
| 99 | rdesc->min_uV = SY8827N_VSELMIN; |
| 100 | rdesc->uV_step = SY8827N_VSELSTEP; |
| 101 | rdesc->vsel_reg = di->vsel_reg; |
| 102 | rdesc->vsel_mask = rdesc->n_voltages - 1; |
| 103 | rdesc->owner = THIS_MODULE; |
| 104 | |
| 105 | rdev = devm_regulator_register(di->dev, &di->desc, config); |
| 106 | return PTR_ERR_OR_ZERO(rdev); |
| 107 | } |
| 108 | |
Jisheng Zhang | 6bdd1c6 | 2021-08-03 16:52:11 +0800 | [diff] [blame] | 109 | static bool sy8827n_volatile_reg(struct device *dev, unsigned int reg) |
| 110 | { |
| 111 | if (reg == SY8827N_PGOOD) |
| 112 | return true; |
| 113 | return false; |
| 114 | } |
| 115 | |
Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 116 | static const struct regmap_config sy8827n_regmap_config = { |
| 117 | .reg_bits = 8, |
| 118 | .val_bits = 8, |
Jisheng Zhang | 6bdd1c6 | 2021-08-03 16:52:11 +0800 | [diff] [blame] | 119 | .volatile_reg = sy8827n_volatile_reg, |
| 120 | .num_reg_defaults_raw = SY8827N_MAX, |
| 121 | .cache_type = REGCACHE_FLAT, |
Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 122 | }; |
| 123 | |
| 124 | static int sy8827n_i2c_probe(struct i2c_client *client) |
| 125 | { |
| 126 | struct device *dev = &client->dev; |
| 127 | struct device_node *np = dev->of_node; |
| 128 | struct sy8827n_device_info *di; |
| 129 | struct regulator_config config = { }; |
| 130 | struct regmap *regmap; |
| 131 | int ret; |
| 132 | |
| 133 | di = devm_kzalloc(dev, sizeof(struct sy8827n_device_info), GFP_KERNEL); |
| 134 | if (!di) |
| 135 | return -ENOMEM; |
| 136 | |
| 137 | di->regulator = of_get_regulator_init_data(dev, np, &di->desc); |
| 138 | if (!di->regulator) { |
| 139 | dev_err(dev, "Platform data not found!\n"); |
| 140 | return -EINVAL; |
| 141 | } |
| 142 | |
| 143 | di->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); |
| 144 | if (IS_ERR(di->en_gpio)) |
| 145 | return PTR_ERR(di->en_gpio); |
| 146 | |
| 147 | if (of_property_read_bool(np, "silergy,vsel-state-high")) |
| 148 | di->vsel_reg = SY8827N_VSEL1; |
| 149 | else |
| 150 | di->vsel_reg = SY8827N_VSEL0; |
| 151 | |
| 152 | di->dev = dev; |
| 153 | |
| 154 | regmap = devm_regmap_init_i2c(client, &sy8827n_regmap_config); |
| 155 | if (IS_ERR(regmap)) { |
| 156 | dev_err(dev, "Failed to allocate regmap!\n"); |
| 157 | return PTR_ERR(regmap); |
| 158 | } |
| 159 | i2c_set_clientdata(client, di); |
| 160 | |
| 161 | config.dev = di->dev; |
| 162 | config.init_data = di->regulator; |
| 163 | config.regmap = regmap; |
| 164 | config.driver_data = di; |
| 165 | config.of_node = np; |
| 166 | |
| 167 | ret = sy8827n_regulator_register(di, &config); |
| 168 | if (ret < 0) |
| 169 | dev_err(dev, "Failed to register regulator!\n"); |
| 170 | return ret; |
| 171 | } |
| 172 | |
Jisheng Zhang | a16138a | 2020-08-10 09:57:53 +0800 | [diff] [blame] | 173 | #ifdef CONFIG_OF |
Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 174 | static const struct of_device_id sy8827n_dt_ids[] = { |
| 175 | { |
| 176 | .compatible = "silergy,sy8827n", |
| 177 | }, |
| 178 | { } |
| 179 | }; |
| 180 | MODULE_DEVICE_TABLE(of, sy8827n_dt_ids); |
Jisheng Zhang | a16138a | 2020-08-10 09:57:53 +0800 | [diff] [blame] | 181 | #endif |
Jisheng Zhang | 38fc6f2 | 2020-07-02 17:14:38 +0800 | [diff] [blame] | 182 | |
| 183 | static const struct i2c_device_id sy8827n_id[] = { |
| 184 | { "sy8827n", }, |
| 185 | { }, |
| 186 | }; |
| 187 | MODULE_DEVICE_TABLE(i2c, sy8827n_id); |
| 188 | |
| 189 | static struct i2c_driver sy8827n_regulator_driver = { |
| 190 | .driver = { |
| 191 | .name = "sy8827n-regulator", |
| 192 | .of_match_table = of_match_ptr(sy8827n_dt_ids), |
| 193 | }, |
| 194 | .probe_new = sy8827n_i2c_probe, |
| 195 | .id_table = sy8827n_id, |
| 196 | }; |
| 197 | module_i2c_driver(sy8827n_regulator_driver); |
| 198 | |
| 199 | MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); |
| 200 | MODULE_DESCRIPTION("SY8827N regulator driver"); |
| 201 | MODULE_LICENSE("GPL v2"); |