Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2018 Spreadtrum Communications Inc. |
| 4 | * Copyright (C) 2018 Linaro Ltd. |
| 5 | */ |
| 6 | |
| 7 | #include <linux/gpio/driver.h> |
| 8 | #include <linux/interrupt.h> |
| 9 | #include <linux/kernel.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/of_device.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/regmap.h> |
| 14 | |
| 15 | /* EIC registers definition */ |
| 16 | #define SPRD_PMIC_EIC_DATA 0x0 |
| 17 | #define SPRD_PMIC_EIC_DMSK 0x4 |
| 18 | #define SPRD_PMIC_EIC_IEV 0x14 |
| 19 | #define SPRD_PMIC_EIC_IE 0x18 |
| 20 | #define SPRD_PMIC_EIC_RIS 0x1c |
| 21 | #define SPRD_PMIC_EIC_MIS 0x20 |
| 22 | #define SPRD_PMIC_EIC_IC 0x24 |
| 23 | #define SPRD_PMIC_EIC_TRIG 0x28 |
| 24 | #define SPRD_PMIC_EIC_CTRL0 0x40 |
| 25 | |
| 26 | /* |
| 27 | * The PMIC EIC controller only has one bank, and each bank now can contain |
| 28 | * 16 EICs. |
| 29 | */ |
| 30 | #define SPRD_PMIC_EIC_PER_BANK_NR 16 |
| 31 | #define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR |
| 32 | #define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0) |
| 33 | #define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1)) |
| 34 | #define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0) |
| 35 | |
| 36 | /* |
| 37 | * These registers are modified under the irq bus lock and cached to avoid |
| 38 | * unnecessary writes in bus_sync_unlock. |
| 39 | */ |
| 40 | enum { |
| 41 | REG_IEV, |
| 42 | REG_IE, |
| 43 | REG_TRIG, |
| 44 | CACHE_NR_REGS |
| 45 | }; |
| 46 | |
| 47 | /** |
| 48 | * struct sprd_pmic_eic - PMIC EIC controller |
| 49 | * @chip: the gpio_chip structure. |
| 50 | * @intc: the irq_chip structure. |
Lee Jones | 3cd7f77 | 2020-06-30 14:33:39 +0100 | [diff] [blame] | 51 | * @map: the regmap from the parent device. |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 52 | * @offset: the EIC controller's offset address of the PMIC. |
| 53 | * @reg: the array to cache the EIC registers. |
| 54 | * @buslock: for bus lock/sync and unlock. |
| 55 | * @irq: the interrupt number of the PMIC EIC conteroller. |
| 56 | */ |
| 57 | struct sprd_pmic_eic { |
| 58 | struct gpio_chip chip; |
| 59 | struct irq_chip intc; |
| 60 | struct regmap *map; |
| 61 | u32 offset; |
| 62 | u8 reg[CACHE_NR_REGS]; |
| 63 | struct mutex buslock; |
| 64 | int irq; |
| 65 | }; |
| 66 | |
| 67 | static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset, |
| 68 | u16 reg, unsigned int val) |
| 69 | { |
| 70 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 71 | u32 shift = SPRD_PMIC_EIC_BIT(offset); |
| 72 | |
| 73 | regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg, |
| 74 | BIT(shift), val << shift); |
| 75 | } |
| 76 | |
| 77 | static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset, |
| 78 | u16 reg) |
| 79 | { |
| 80 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 81 | u32 value; |
| 82 | int ret; |
| 83 | |
| 84 | ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); |
| 85 | if (ret) |
| 86 | return ret; |
| 87 | |
| 88 | return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset))); |
| 89 | } |
| 90 | |
| 91 | static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset) |
| 92 | { |
| 93 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1); |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset) |
| 98 | { |
| 99 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0); |
| 100 | } |
| 101 | |
| 102 | static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset) |
| 103 | { |
| 104 | return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA); |
| 105 | } |
| 106 | |
| 107 | static int sprd_pmic_eic_direction_input(struct gpio_chip *chip, |
| 108 | unsigned int offset) |
| 109 | { |
| 110 | /* EICs are always input, nothing need to do here. */ |
| 111 | return 0; |
| 112 | } |
| 113 | |
| 114 | static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset, |
| 115 | int value) |
| 116 | { |
| 117 | /* EICs are always input, nothing need to do here. */ |
| 118 | } |
| 119 | |
| 120 | static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip, |
| 121 | unsigned int offset, |
| 122 | unsigned int debounce) |
| 123 | { |
| 124 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 125 | u32 reg, value; |
| 126 | int ret; |
| 127 | |
| 128 | reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4; |
| 129 | ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); |
| 130 | if (ret) |
| 131 | return ret; |
| 132 | |
| 133 | value &= ~SPRD_PMIC_EIC_DBNC_MASK; |
| 134 | value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK; |
| 135 | return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value); |
| 136 | } |
| 137 | |
| 138 | static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset, |
| 139 | unsigned long config) |
| 140 | { |
| 141 | unsigned long param = pinconf_to_config_param(config); |
| 142 | u32 arg = pinconf_to_config_argument(config); |
| 143 | |
| 144 | if (param == PIN_CONFIG_INPUT_DEBOUNCE) |
| 145 | return sprd_pmic_eic_set_debounce(chip, offset, arg); |
| 146 | |
| 147 | return -ENOTSUPP; |
| 148 | } |
| 149 | |
| 150 | static void sprd_pmic_eic_irq_mask(struct irq_data *data) |
| 151 | { |
| 152 | struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| 153 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 154 | |
| 155 | pmic_eic->reg[REG_IE] = 0; |
| 156 | pmic_eic->reg[REG_TRIG] = 0; |
| 157 | } |
| 158 | |
| 159 | static void sprd_pmic_eic_irq_unmask(struct irq_data *data) |
| 160 | { |
| 161 | struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| 162 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 163 | |
| 164 | pmic_eic->reg[REG_IE] = 1; |
| 165 | pmic_eic->reg[REG_TRIG] = 1; |
| 166 | } |
| 167 | |
| 168 | static int sprd_pmic_eic_irq_set_type(struct irq_data *data, |
| 169 | unsigned int flow_type) |
| 170 | { |
| 171 | struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| 172 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 173 | |
| 174 | switch (flow_type) { |
| 175 | case IRQ_TYPE_LEVEL_HIGH: |
| 176 | pmic_eic->reg[REG_IEV] = 1; |
| 177 | break; |
| 178 | case IRQ_TYPE_LEVEL_LOW: |
| 179 | pmic_eic->reg[REG_IEV] = 0; |
| 180 | break; |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 181 | case IRQ_TYPE_EDGE_RISING: |
| 182 | case IRQ_TYPE_EDGE_FALLING: |
| 183 | case IRQ_TYPE_EDGE_BOTH: |
| 184 | /* |
| 185 | * Will set the trigger level according to current EIC level |
| 186 | * in irq_bus_sync_unlock() interface, so here nothing to do. |
| 187 | */ |
| 188 | break; |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 189 | default: |
| 190 | return -ENOTSUPP; |
| 191 | } |
| 192 | |
| 193 | return 0; |
| 194 | } |
| 195 | |
| 196 | static void sprd_pmic_eic_bus_lock(struct irq_data *data) |
| 197 | { |
| 198 | struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| 199 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| 200 | |
| 201 | mutex_lock(&pmic_eic->buslock); |
| 202 | } |
| 203 | |
| 204 | static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data) |
| 205 | { |
| 206 | struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| 207 | struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 208 | u32 trigger = irqd_get_trigger_type(data); |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 209 | u32 offset = irqd_to_hwirq(data); |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 210 | int state; |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 211 | |
| 212 | /* Set irq type */ |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 213 | if (trigger & IRQ_TYPE_EDGE_BOTH) { |
| 214 | state = sprd_pmic_eic_get(chip, offset); |
| 215 | if (state) |
| 216 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); |
| 217 | else |
| 218 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); |
| 219 | } else { |
| 220 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, |
| 221 | pmic_eic->reg[REG_IEV]); |
| 222 | } |
| 223 | |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 224 | /* Set irq unmask */ |
| 225 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, |
| 226 | pmic_eic->reg[REG_IE]); |
| 227 | /* Generate trigger start pulse for debounce EIC */ |
| 228 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, |
| 229 | pmic_eic->reg[REG_TRIG]); |
| 230 | |
| 231 | mutex_unlock(&pmic_eic->buslock); |
| 232 | } |
| 233 | |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 234 | static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip, |
| 235 | unsigned int irq, unsigned int offset) |
| 236 | { |
| 237 | u32 trigger = irq_get_trigger_type(irq); |
| 238 | int state, post_state; |
| 239 | |
| 240 | if (!(trigger & IRQ_TYPE_EDGE_BOTH)) |
| 241 | return; |
| 242 | |
| 243 | state = sprd_pmic_eic_get(chip, offset); |
| 244 | retry: |
| 245 | if (state) |
| 246 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); |
| 247 | else |
| 248 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); |
| 249 | |
| 250 | post_state = sprd_pmic_eic_get(chip, offset); |
| 251 | if (state != post_state) { |
| 252 | dev_warn(chip->parent, "PMIC EIC level was changed.\n"); |
| 253 | state = post_state; |
| 254 | goto retry; |
| 255 | } |
| 256 | |
| 257 | /* Set irq unmask */ |
| 258 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1); |
| 259 | /* Generate trigger start pulse for debounce EIC */ |
| 260 | sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1); |
| 261 | } |
| 262 | |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 263 | static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data) |
| 264 | { |
| 265 | struct sprd_pmic_eic *pmic_eic = data; |
| 266 | struct gpio_chip *chip = &pmic_eic->chip; |
| 267 | unsigned long status; |
| 268 | u32 n, girq, val; |
| 269 | int ret; |
| 270 | |
| 271 | ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS, |
| 272 | &val); |
| 273 | if (ret) |
| 274 | return IRQ_RETVAL(ret); |
| 275 | |
| 276 | status = val & SPRD_PMIC_EIC_DATA_MASK; |
| 277 | |
| 278 | for_each_set_bit(n, &status, chip->ngpio) { |
| 279 | /* Clear the interrupt */ |
| 280 | sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1); |
| 281 | |
| 282 | girq = irq_find_mapping(chip->irq.domain, n); |
| 283 | handle_nested_irq(girq); |
Baolin Wang | 92da8b9 | 2018-03-30 15:02:38 +0800 | [diff] [blame] | 284 | |
| 285 | /* |
| 286 | * The PMIC EIC can only support level trigger, so we can |
| 287 | * toggle the level trigger to emulate the edge trigger. |
| 288 | */ |
| 289 | sprd_pmic_eic_toggle_trigger(chip, girq, n); |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 290 | } |
| 291 | |
| 292 | return IRQ_HANDLED; |
| 293 | } |
| 294 | |
| 295 | static int sprd_pmic_eic_probe(struct platform_device *pdev) |
| 296 | { |
| 297 | struct gpio_irq_chip *irq; |
| 298 | struct sprd_pmic_eic *pmic_eic; |
| 299 | int ret; |
| 300 | |
| 301 | pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL); |
| 302 | if (!pmic_eic) |
| 303 | return -ENOMEM; |
| 304 | |
| 305 | mutex_init(&pmic_eic->buslock); |
| 306 | |
| 307 | pmic_eic->irq = platform_get_irq(pdev, 0); |
Stephen Boyd | 15bddb7 | 2019-07-30 11:15:15 -0700 | [diff] [blame] | 308 | if (pmic_eic->irq < 0) |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 309 | return pmic_eic->irq; |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 310 | |
| 311 | pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL); |
| 312 | if (!pmic_eic->map) |
| 313 | return -ENODEV; |
| 314 | |
| 315 | ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset); |
| 316 | if (ret) { |
| 317 | dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n"); |
| 318 | return ret; |
| 319 | } |
| 320 | |
| 321 | ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL, |
| 322 | sprd_pmic_eic_irq_handler, |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 323 | IRQF_ONESHOT | IRQF_NO_SUSPEND, |
| 324 | dev_name(&pdev->dev), pmic_eic); |
| 325 | if (ret) { |
| 326 | dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n"); |
| 327 | return ret; |
| 328 | } |
| 329 | |
| 330 | pmic_eic->chip.label = dev_name(&pdev->dev); |
| 331 | pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR; |
| 332 | pmic_eic->chip.base = -1; |
| 333 | pmic_eic->chip.parent = &pdev->dev; |
| 334 | pmic_eic->chip.of_node = pdev->dev.of_node; |
| 335 | pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input; |
| 336 | pmic_eic->chip.request = sprd_pmic_eic_request; |
| 337 | pmic_eic->chip.free = sprd_pmic_eic_free; |
| 338 | pmic_eic->chip.set_config = sprd_pmic_eic_set_config; |
| 339 | pmic_eic->chip.set = sprd_pmic_eic_set; |
| 340 | pmic_eic->chip.get = sprd_pmic_eic_get; |
| 341 | |
| 342 | pmic_eic->intc.name = dev_name(&pdev->dev); |
| 343 | pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask; |
| 344 | pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask; |
| 345 | pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type; |
| 346 | pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock; |
| 347 | pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock; |
| 348 | pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; |
| 349 | |
| 350 | irq = &pmic_eic->chip.irq; |
| 351 | irq->chip = &pmic_eic->intc; |
| 352 | irq->threaded = true; |
| 353 | |
| 354 | ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic); |
| 355 | if (ret < 0) { |
| 356 | dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); |
| 357 | return ret; |
| 358 | } |
| 359 | |
| 360 | platform_set_drvdata(pdev, pmic_eic); |
| 361 | return 0; |
| 362 | } |
| 363 | |
| 364 | static const struct of_device_id sprd_pmic_eic_of_match[] = { |
Baolin Wang | 567cbf0 | 2019-02-19 10:29:58 +0800 | [diff] [blame] | 365 | { .compatible = "sprd,sc2731-eic", }, |
Baolin Wang | 348f3cd | 2018-03-05 10:56:52 +0800 | [diff] [blame] | 366 | { /* end of list */ } |
| 367 | }; |
| 368 | MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match); |
| 369 | |
| 370 | static struct platform_driver sprd_pmic_eic_driver = { |
| 371 | .probe = sprd_pmic_eic_probe, |
| 372 | .driver = { |
| 373 | .name = "sprd-pmic-eic", |
| 374 | .of_match_table = sprd_pmic_eic_of_match, |
| 375 | }, |
| 376 | }; |
| 377 | |
| 378 | module_platform_driver(sprd_pmic_eic_driver); |
| 379 | |
| 380 | MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver"); |
| 381 | MODULE_LICENSE("GPL v2"); |