Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 Armadeus Systems |
| 3 | * |
| 4 | * This file is dual-licensed: you can use it either under the terms |
| 5 | * of the GPL or the X11 license, at your option. Note that this dual |
| 6 | * licensing only applies to this file, and not this project as a |
| 7 | * whole. |
| 8 | * |
| 9 | * a) This file is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This file is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public |
| 20 | * License along with this file; if not, write to the Free |
| 21 | * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| 22 | * MA 02110-1301 USA |
| 23 | * |
| 24 | * Or, alternatively, |
| 25 | * |
| 26 | * b) Permission is hereby granted, free of charge, to any person |
| 27 | * obtaining a copy of this software and associated documentation |
| 28 | * files (the "Software"), to deal in the Software without |
| 29 | * restriction, including without limitation the rights to use, |
| 30 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 31 | * sell copies of the Software, and to permit persons to whom the |
| 32 | * Software is furnished to do so, subject to the following |
| 33 | * conditions: |
| 34 | * |
| 35 | * The above copyright notice and this permission notice shall be |
| 36 | * included in all copies or substantial portions of the Software. |
| 37 | * |
| 38 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 39 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 40 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 41 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 42 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 43 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 44 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 45 | * OTHER DEALINGS IN THE SOFTWARE. |
| 46 | */ |
| 47 | |
| 48 | #include <dt-bindings/gpio/gpio.h> |
| 49 | #include <dt-bindings/input/input.h> |
| 50 | #include <dt-bindings/interrupt-controller/irq.h> |
| 51 | |
| 52 | / { |
| 53 | chosen { |
| 54 | stdout-path = &uart4; |
| 55 | }; |
| 56 | |
| 57 | display@di0 { |
| 58 | compatible = "fsl,imx-parallel-display"; |
| 59 | interface-pix-fmt = "bgr666"; |
| 60 | pinctrl-names = "default"; |
| 61 | pinctrl-0 = <&pinctrl_ipu1_disp1>; |
| 62 | |
| 63 | display-timings { |
| 64 | lw700 { |
| 65 | clock-frequency = <33000033>; |
| 66 | hactive = <800>; |
| 67 | vactive = <480>; |
| 68 | hback-porch = <96>; |
| 69 | hfront-porch = <96>; |
| 70 | vback-porch = <20>; |
| 71 | vfront-porch = <21>; |
| 72 | hsync-len = <64>; |
| 73 | vsync-len = <4>; |
| 74 | hsync-active = <1>; |
| 75 | vsync-active = <1>; |
| 76 | de-active = <1>; |
| 77 | pixelclk-active = <1>; |
| 78 | }; |
| 79 | }; |
| 80 | |
| 81 | port { |
| 82 | display_in: endpoint { |
| 83 | remote-endpoint = <&ipu1_di0_disp0>; |
| 84 | }; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | gpio-keys { |
| 89 | compatible = "gpio-keys"; |
| 90 | pinctrl-names = "default"; |
| 91 | pinctrl-0 = <&pinctrl_gpio_keys>; |
| 92 | |
| 93 | user-button { |
| 94 | label = "User button"; |
| 95 | gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| 96 | linux,code = <BTN_MISC>; |
Sudeep Holla | 26cefdd | 2015-10-21 11:10:08 +0100 | [diff] [blame] | 97 | wakeup-source; |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 98 | }; |
| 99 | }; |
| 100 | |
| 101 | leds { |
| 102 | compatible = "gpio-leds"; |
| 103 | pinctrl-names = "default"; |
| 104 | pinctrl-0 = <&pinctrl_gpio_leds>; |
| 105 | |
| 106 | user-led { |
| 107 | label = "User LED"; |
| 108 | gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| 109 | linux,default-trigger = "heartbeat"; |
| 110 | default-state = "on"; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | regulators { |
| 115 | compatible = "simple-bus"; |
| 116 | |
| 117 | reg_3p3v: 3p3v { |
| 118 | compatible = "regulator-fixed"; |
| 119 | regulator-name = "3P3V"; |
| 120 | regulator-min-microvolt = <3300000>; |
| 121 | regulator-max-microvolt = <3300000>; |
| 122 | regulator-always-on; |
| 123 | }; |
| 124 | |
| 125 | reg_usbh1_vbus: usb-h1-vbus { |
| 126 | compatible = "regulator-fixed"; |
| 127 | regulator-name = "usb_h1_vbus"; |
| 128 | regulator-min-microvolt = <5000000>; |
| 129 | regulator-max-microvolt = <5000000>; |
| 130 | regulator-always-on; |
| 131 | }; |
| 132 | |
| 133 | reg_usb_otg_vbus: usb-otg-vbus { |
| 134 | compatible = "regulator-fixed"; |
| 135 | regulator-name = "usb_otg_vbus"; |
| 136 | regulator-min-microvolt = <5000000>; |
| 137 | regulator-max-microvolt = <5000000>; |
| 138 | regulator-always-on; |
| 139 | }; |
| 140 | }; |
| 141 | |
| 142 | sound { |
| 143 | compatible = "fsl,imx6-armadeus-sgtl5000", |
| 144 | "fsl,imx-audio-sgtl5000"; |
| 145 | model = "imx6-armadeus-sgtl5000"; |
| 146 | ssi-controller = <&ssi1>; |
| 147 | audio-codec = <&codec>; |
| 148 | audio-routing = |
| 149 | "MIC_IN", "Mic Jack", |
| 150 | "Mic Jack", "Mic Bias", |
| 151 | "Headphone Jack", "HP_OUT"; |
| 152 | mux-int-port = <1>; |
| 153 | mux-ext-port = <3>; |
| 154 | }; |
| 155 | |
| 156 | sound-spdif { |
| 157 | compatible = "fsl,imx-audio-spdif"; |
| 158 | model = "imx-spdif"; |
| 159 | spdif-controller = <&spdif>; |
| 160 | spdif-out; |
| 161 | }; |
| 162 | }; |
| 163 | |
| 164 | &audmux { |
| 165 | pinctrl-names = "default"; |
| 166 | pinctrl-0 = <&pinctrl_audmux>; |
| 167 | status = "okay"; |
| 168 | }; |
| 169 | |
| 170 | &can2 { |
| 171 | pinctrl-names = "default"; |
| 172 | pinctrl-0 = <&pinctrl_flexcan2>; |
| 173 | status = "okay"; |
| 174 | }; |
| 175 | |
| 176 | &ecspi1 { |
| 177 | pinctrl-names = "default"; |
| 178 | pinctrl-0 = <&pinctrl_ecspi1>; |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 179 | cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, |
| 180 | <&gpio4 10 GPIO_ACTIVE_LOW>, |
| 181 | <&gpio4 11 GPIO_ACTIVE_LOW>; |
| 182 | status = "okay"; |
| 183 | }; |
| 184 | |
| 185 | &hdmi { |
| 186 | ddc-i2c-bus = <&i2c3>; |
| 187 | status = "okay"; |
| 188 | }; |
| 189 | |
| 190 | &i2c1 { |
| 191 | clock-frequency = <400000>; |
| 192 | pinctrl-names = "default"; |
| 193 | pinctrl-0 = <&pinctrl_i2c1>; |
| 194 | status = "okay"; |
| 195 | |
| 196 | touchscreen@48 { |
| 197 | compatible = "semtech,sx8654"; |
| 198 | reg = <0x48>; |
| 199 | pinctrl-names = "default"; |
| 200 | pinctrl-0 = <&pinctrl_touchscreen>; |
| 201 | interrupt-parent = <&gpio6>; |
| 202 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| 203 | }; |
| 204 | }; |
| 205 | |
| 206 | &i2c2 { |
| 207 | clock-frequency = <400000>; |
| 208 | pinctrl-names = "default"; |
| 209 | pinctrl-0 = <&pinctrl_i2c2>; |
| 210 | status = "okay"; |
| 211 | |
| 212 | codec: sgtl5000@0a { |
| 213 | compatible = "fsl,sgtl5000"; |
| 214 | reg = <0x0a>; |
Fabio Estevam | b26a68c | 2016-04-26 22:28:29 -0300 | [diff] [blame] | 215 | clocks = <&clks IMX6QDL_CLK_CKO>; |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 216 | VDDA-supply = <®_3p3v>; |
| 217 | VDDIO-supply = <®_3p3v>; |
| 218 | }; |
| 219 | }; |
| 220 | |
| 221 | &i2c3 { |
| 222 | clock-frequency = <400000>; |
| 223 | pinctrl-names = "default"; |
| 224 | pinctrl-0 = <&pinctrl_i2c3>; |
| 225 | status = "okay"; |
| 226 | }; |
| 227 | |
| 228 | &ipu1_di0_disp0 { |
| 229 | remote-endpoint = <&display_in>; |
| 230 | }; |
| 231 | |
| 232 | &pcie { |
| 233 | pinctrl-names = "default"; |
| 234 | pinctrl-0 = <&pinctrl_pcie>; |
Fabio Estevam | cc20028 | 2017-06-05 13:22:20 -0300 | [diff] [blame] | 235 | reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>; |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 236 | status = "okay"; |
| 237 | }; |
| 238 | |
| 239 | &pwm3 { |
| 240 | pinctrl-names = "default"; |
| 241 | pinctrl-0 = <&pinctrl_pwm3>; |
| 242 | status = "okay"; |
| 243 | }; |
| 244 | |
| 245 | /* GPS */ |
| 246 | &uart1 { |
| 247 | pinctrl-names = "default"; |
| 248 | pinctrl-0 = <&pinctrl_uart1>; |
| 249 | status = "okay"; |
| 250 | }; |
| 251 | |
| 252 | /* GSM */ |
| 253 | &uart3 { |
| 254 | pinctrl-names = "default"; |
| 255 | pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; |
Geert Uytterhoeven | 2e7c416 | 2016-05-31 16:31:51 +0200 | [diff] [blame] | 256 | uart-has-rtscts; |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 257 | status = "okay"; |
| 258 | }; |
| 259 | |
| 260 | /* console */ |
| 261 | &uart4 { |
| 262 | pinctrl-names = "default"; |
| 263 | pinctrl-0 = <&pinctrl_uart4>; |
| 264 | status = "okay"; |
| 265 | }; |
| 266 | |
| 267 | &usbh1 { |
| 268 | vbus-supply = <®_usbh1_vbus>; |
| 269 | phy_type = "utmi"; |
| 270 | status = "okay"; |
| 271 | }; |
| 272 | |
| 273 | &usbotg { |
| 274 | pinctrl-names = "default"; |
| 275 | pinctrl-0 = <&pinctrl_usbotg>; |
| 276 | vbus-supply = <®_usb_otg_vbus>; |
| 277 | dr_mode = "otg"; |
| 278 | status = "okay"; |
| 279 | }; |
| 280 | |
| 281 | /* microSD */ |
| 282 | &usdhc2 { |
| 283 | pinctrl-names = "default"; |
| 284 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 285 | cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 286 | no-1-8-v; |
| 287 | status = "okay"; |
| 288 | }; |
| 289 | |
| 290 | &spdif { |
| 291 | pinctrl-names = "default"; |
| 292 | pinctrl-0 = <&pinctrl_spdif>; |
| 293 | status = "okay"; |
| 294 | }; |
| 295 | |
| 296 | &ssi1 { |
| 297 | status = "okay"; |
| 298 | }; |
| 299 | |
| 300 | &iomuxc { |
| 301 | pinctrl-names = "default"; |
| 302 | pinctrl-0 = <&pinctrl_gpios>; |
| 303 | |
| 304 | apf6dev { |
| 305 | pinctrl_audmux: audmuxgrp { |
| 306 | fsl,pins = < |
| 307 | MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 |
| 308 | MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 |
| 309 | MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 |
| 310 | MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 |
| 311 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 |
| 312 | >; |
| 313 | }; |
| 314 | |
| 315 | pinctrl_ecspi1: ecspi1grp { |
| 316 | fsl,pins = < |
| 317 | MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 |
| 318 | MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 |
| 319 | MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 |
| 320 | MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 |
| 321 | MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 |
| 322 | MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| 323 | >; |
| 324 | }; |
| 325 | |
| 326 | pinctrl_flexcan2: flexcan2grp { |
| 327 | fsl,pins = < |
| 328 | MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| 329 | MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| 330 | >; |
| 331 | }; |
| 332 | |
| 333 | pinctrl_gpio_keys: gpiokeysgrp { |
| 334 | fsl,pins = < |
| 335 | MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 |
| 336 | >; |
| 337 | }; |
| 338 | |
| 339 | pinctrl_gpio_leds: gpioledsgrp { |
| 340 | fsl,pins = < |
| 341 | MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 |
| 342 | >; |
| 343 | }; |
| 344 | |
| 345 | pinctrl_gpios: gpiosgrp { |
| 346 | fsl,pins = < |
| 347 | MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 |
| 348 | MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 |
Jagan Teki | 05c183e | 2016-10-14 15:09:28 +0530 | [diff] [blame] | 349 | MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 |
| 350 | MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 |
| 351 | MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 |
| 352 | MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 |
| 353 | MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 |
| 354 | MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 |
| 355 | MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 |
Sébastien Szymanski | 673254d | 2015-05-15 15:44:27 +0200 | [diff] [blame] | 356 | >; |
| 357 | }; |
| 358 | |
| 359 | pinctrl_gsm: gsmgrp { |
| 360 | fsl,pins = < |
| 361 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ |
| 362 | MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ |
| 363 | >; |
| 364 | }; |
| 365 | |
| 366 | pinctrl_i2c1: i2c1grp { |
| 367 | fsl,pins = < |
| 368 | MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| 369 | MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| 370 | >; |
| 371 | }; |
| 372 | |
| 373 | pinctrl_i2c2: i2c2grp { |
| 374 | fsl,pins = < |
| 375 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 376 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 377 | >; |
| 378 | }; |
| 379 | |
| 380 | pinctrl_i2c3: i2c3grp { |
| 381 | fsl,pins = < |
| 382 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 383 | MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| 384 | >; |
| 385 | }; |
| 386 | |
| 387 | pinctrl_ipu1_disp1: ipu1disp1grp { |
| 388 | fsl,pins = < |
| 389 | MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 |
| 390 | MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 |
| 391 | MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 |
| 392 | MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 |
| 393 | MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 |
| 394 | MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 |
| 395 | MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 |
| 396 | MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 |
| 397 | MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 |
| 398 | MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 |
| 399 | MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 |
| 400 | MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 |
| 401 | MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 |
| 402 | MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 |
| 403 | MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 |
| 404 | MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 |
| 405 | MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 |
| 406 | MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 |
| 407 | MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 |
| 408 | MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 |
| 409 | MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 |
| 410 | MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 |
| 411 | >; |
| 412 | }; |
| 413 | |
| 414 | pinctrl_pcie: pciegrp { |
| 415 | fsl,pins = < |
| 416 | MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 |
| 417 | >; |
| 418 | }; |
| 419 | |
| 420 | pinctrl_pwm3: pwm3grp { |
| 421 | fsl,pins = < |
| 422 | MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| 423 | >; |
| 424 | }; |
| 425 | |
| 426 | pinctrl_uart1: uart1grp { |
| 427 | fsl,pins = < |
| 428 | MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 |
| 429 | MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 |
| 430 | >; |
| 431 | }; |
| 432 | |
| 433 | pinctrl_uart3: uart3grp { |
| 434 | fsl,pins = < |
| 435 | MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 |
| 436 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 |
| 437 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 |
| 438 | MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 |
| 439 | >; |
| 440 | }; |
| 441 | |
| 442 | pinctrl_uart4: uart4grp { |
| 443 | fsl,pins = < |
| 444 | MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 |
| 445 | MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 |
| 446 | >; |
| 447 | }; |
| 448 | |
| 449 | pinctrl_usbotg: usbotggrp { |
| 450 | fsl,pins = < |
| 451 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 |
| 452 | >; |
| 453 | }; |
| 454 | |
| 455 | pinctrl_usdhc2: usdhc2grp { |
| 456 | fsl,pins = < |
| 457 | MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| 458 | MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| 459 | MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| 460 | MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| 461 | MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| 462 | MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| 463 | >; |
| 464 | }; |
| 465 | |
| 466 | pinctrl_spdif: spdifgrp { |
| 467 | fsl,pins = < |
| 468 | MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 |
| 469 | >; |
| 470 | }; |
| 471 | |
| 472 | pinctrl_touchscreen: touchscreengrp { |
| 473 | fsl,pins = < |
| 474 | MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 |
| 475 | >; |
| 476 | }; |
| 477 | }; |
| 478 | }; |