Beniamin Bia | 09b08ac | 2020-01-14 13:21:57 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin |
| 4 | * |
| 5 | * Copyright 2015-2019 Analog Devices Inc. |
| 6 | */ |
| 7 | |
| 8 | #include <linux/bits.h> |
| 9 | #include <linux/device.h> |
| 10 | #include <linux/hwmon.h> |
| 11 | #include <linux/i2c.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/regulator/consumer.h> |
| 15 | |
| 16 | /* Command Byte Operations */ |
| 17 | #define ADM1177_CMD_V_CONT BIT(0) |
| 18 | #define ADM1177_CMD_I_CONT BIT(2) |
| 19 | #define ADM1177_CMD_VRANGE BIT(4) |
| 20 | |
| 21 | /* Extended Register */ |
| 22 | #define ADM1177_REG_ALERT_TH 2 |
| 23 | |
| 24 | #define ADM1177_BITS 12 |
| 25 | |
| 26 | /** |
| 27 | * struct adm1177_state - driver instance specific data |
| 28 | * @client pointer to i2c client |
| 29 | * @reg regulator info for the the power supply of the device |
| 30 | * @r_sense_uohm current sense resistor value |
| 31 | * @alert_threshold_ua current limit for shutdown |
| 32 | * @vrange_high internal voltage divider |
| 33 | */ |
| 34 | struct adm1177_state { |
| 35 | struct i2c_client *client; |
| 36 | struct regulator *reg; |
| 37 | u32 r_sense_uohm; |
| 38 | u32 alert_threshold_ua; |
| 39 | bool vrange_high; |
| 40 | }; |
| 41 | |
| 42 | static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data) |
| 43 | { |
| 44 | return i2c_master_recv(st->client, data, num); |
| 45 | } |
| 46 | |
| 47 | static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd) |
| 48 | { |
| 49 | return i2c_smbus_write_byte(st->client, cmd); |
| 50 | } |
| 51 | |
| 52 | static int adm1177_write_alert_thr(struct adm1177_state *st, |
| 53 | u32 alert_threshold_ua) |
| 54 | { |
| 55 | u64 val; |
| 56 | int ret; |
| 57 | |
| 58 | val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm; |
| 59 | val = div_u64(val, 105840000U); |
| 60 | val = div_u64(val, 1000U); |
| 61 | if (val > 0xFF) |
| 62 | val = 0xFF; |
| 63 | |
| 64 | ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH, |
| 65 | val); |
| 66 | if (ret) |
| 67 | return ret; |
| 68 | |
| 69 | st->alert_threshold_ua = alert_threshold_ua; |
| 70 | return 0; |
| 71 | } |
| 72 | |
| 73 | static int adm1177_read(struct device *dev, enum hwmon_sensor_types type, |
| 74 | u32 attr, int channel, long *val) |
| 75 | { |
| 76 | struct adm1177_state *st = dev_get_drvdata(dev); |
| 77 | u8 data[3]; |
| 78 | long dummy; |
| 79 | int ret; |
| 80 | |
| 81 | switch (type) { |
| 82 | case hwmon_curr: |
| 83 | switch (attr) { |
| 84 | case hwmon_curr_input: |
| 85 | ret = adm1177_read_raw(st, 3, data); |
| 86 | if (ret < 0) |
| 87 | return ret; |
| 88 | dummy = (data[1] << 4) | (data[2] & 0xF); |
| 89 | /* |
| 90 | * convert to milliamperes |
| 91 | * ((105.84mV / 4096) x raw) / senseResistor(ohm) |
| 92 | */ |
| 93 | *val = div_u64((105840000ull * dummy), |
| 94 | 4096 * st->r_sense_uohm); |
| 95 | return 0; |
| 96 | case hwmon_curr_max_alarm: |
| 97 | *val = st->alert_threshold_ua; |
| 98 | return 0; |
| 99 | default: |
| 100 | return -EOPNOTSUPP; |
| 101 | } |
| 102 | case hwmon_in: |
| 103 | ret = adm1177_read_raw(st, 3, data); |
| 104 | if (ret < 0) |
| 105 | return ret; |
| 106 | dummy = (data[0] << 4) | (data[2] >> 4); |
| 107 | /* |
| 108 | * convert to millivolts based on resistor devision |
| 109 | * (V_fullscale / 4096) * raw |
| 110 | */ |
| 111 | if (st->vrange_high) |
| 112 | dummy *= 26350; |
| 113 | else |
| 114 | dummy *= 6650; |
| 115 | |
| 116 | *val = DIV_ROUND_CLOSEST(dummy, 4096); |
| 117 | return 0; |
| 118 | default: |
| 119 | return -EOPNOTSUPP; |
| 120 | } |
| 121 | } |
| 122 | |
| 123 | static int adm1177_write(struct device *dev, enum hwmon_sensor_types type, |
| 124 | u32 attr, int channel, long val) |
| 125 | { |
| 126 | struct adm1177_state *st = dev_get_drvdata(dev); |
| 127 | |
| 128 | switch (type) { |
| 129 | case hwmon_curr: |
| 130 | switch (attr) { |
| 131 | case hwmon_curr_max_alarm: |
| 132 | adm1177_write_alert_thr(st, val); |
| 133 | return 0; |
| 134 | default: |
| 135 | return -EOPNOTSUPP; |
| 136 | } |
| 137 | default: |
| 138 | return -EOPNOTSUPP; |
| 139 | } |
| 140 | } |
| 141 | |
| 142 | static umode_t adm1177_is_visible(const void *data, |
| 143 | enum hwmon_sensor_types type, |
| 144 | u32 attr, int channel) |
| 145 | { |
| 146 | const struct adm1177_state *st = data; |
| 147 | |
| 148 | switch (type) { |
| 149 | case hwmon_in: |
| 150 | switch (attr) { |
| 151 | case hwmon_in_input: |
| 152 | return 0444; |
| 153 | } |
| 154 | break; |
| 155 | case hwmon_curr: |
| 156 | switch (attr) { |
| 157 | case hwmon_curr_input: |
| 158 | if (st->r_sense_uohm) |
| 159 | return 0444; |
| 160 | return 0; |
| 161 | case hwmon_curr_max_alarm: |
| 162 | if (st->r_sense_uohm) |
| 163 | return 0644; |
| 164 | return 0; |
| 165 | } |
| 166 | break; |
| 167 | default: |
| 168 | break; |
| 169 | } |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static const struct hwmon_channel_info *adm1177_info[] = { |
| 174 | HWMON_CHANNEL_INFO(curr, |
| 175 | HWMON_C_INPUT | HWMON_C_MAX_ALARM), |
| 176 | HWMON_CHANNEL_INFO(in, |
| 177 | HWMON_I_INPUT), |
| 178 | NULL |
| 179 | }; |
| 180 | |
| 181 | static const struct hwmon_ops adm1177_hwmon_ops = { |
| 182 | .is_visible = adm1177_is_visible, |
| 183 | .read = adm1177_read, |
| 184 | .write = adm1177_write, |
| 185 | }; |
| 186 | |
| 187 | static const struct hwmon_chip_info adm1177_chip_info = { |
| 188 | .ops = &adm1177_hwmon_ops, |
| 189 | .info = adm1177_info, |
| 190 | }; |
| 191 | |
| 192 | static void adm1177_remove(void *data) |
| 193 | { |
| 194 | struct adm1177_state *st = data; |
| 195 | |
| 196 | regulator_disable(st->reg); |
| 197 | } |
| 198 | |
| 199 | static int adm1177_probe(struct i2c_client *client, |
| 200 | const struct i2c_device_id *id) |
| 201 | { |
| 202 | struct device *dev = &client->dev; |
| 203 | struct device *hwmon_dev; |
| 204 | struct adm1177_state *st; |
| 205 | u32 alert_threshold_ua; |
| 206 | int ret; |
| 207 | |
| 208 | st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); |
| 209 | if (!st) |
| 210 | return -ENOMEM; |
| 211 | |
| 212 | st->client = client; |
| 213 | |
| 214 | st->reg = devm_regulator_get_optional(&client->dev, "vref"); |
| 215 | if (IS_ERR(st->reg)) { |
| 216 | if (PTR_ERR(st->reg) == -EPROBE_DEFER) |
| 217 | return -EPROBE_DEFER; |
| 218 | |
| 219 | st->reg = NULL; |
| 220 | } else { |
| 221 | ret = regulator_enable(st->reg); |
| 222 | if (ret) |
| 223 | return ret; |
| 224 | ret = devm_add_action_or_reset(&client->dev, adm1177_remove, |
| 225 | st); |
| 226 | if (ret) |
| 227 | return ret; |
| 228 | } |
| 229 | |
| 230 | if (device_property_read_u32(dev, "shunt-resistor-micro-ohms", |
| 231 | &st->r_sense_uohm)) |
| 232 | st->r_sense_uohm = 0; |
| 233 | if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp", |
| 234 | &alert_threshold_ua)) { |
| 235 | if (st->r_sense_uohm) |
| 236 | /* |
| 237 | * set maximum default value from datasheet based on |
| 238 | * shunt-resistor |
| 239 | */ |
| 240 | alert_threshold_ua = div_u64(105840000000, |
| 241 | st->r_sense_uohm); |
| 242 | else |
| 243 | alert_threshold_ua = 0; |
| 244 | } |
| 245 | st->vrange_high = device_property_read_bool(dev, |
| 246 | "adi,vrange-high-enable"); |
| 247 | if (alert_threshold_ua && st->r_sense_uohm) |
| 248 | adm1177_write_alert_thr(st, alert_threshold_ua); |
| 249 | |
| 250 | ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT | |
| 251 | ADM1177_CMD_I_CONT | |
| 252 | (st->vrange_high ? 0 : ADM1177_CMD_VRANGE)); |
| 253 | if (ret) |
| 254 | return ret; |
| 255 | |
| 256 | hwmon_dev = |
| 257 | devm_hwmon_device_register_with_info(dev, client->name, st, |
| 258 | &adm1177_chip_info, NULL); |
| 259 | return PTR_ERR_OR_ZERO(hwmon_dev); |
| 260 | } |
| 261 | |
| 262 | static const struct i2c_device_id adm1177_id[] = { |
| 263 | {"adm1177", 0}, |
| 264 | {} |
| 265 | }; |
| 266 | MODULE_DEVICE_TABLE(i2c, adm1177_id); |
| 267 | |
| 268 | static const struct of_device_id adm1177_dt_ids[] = { |
| 269 | { .compatible = "adi,adm1177" }, |
| 270 | {}, |
| 271 | }; |
| 272 | MODULE_DEVICE_TABLE(of, adm1177_dt_ids); |
| 273 | |
| 274 | static struct i2c_driver adm1177_driver = { |
| 275 | .class = I2C_CLASS_HWMON, |
| 276 | .driver = { |
| 277 | .name = "adm1177", |
| 278 | .of_match_table = adm1177_dt_ids, |
| 279 | }, |
| 280 | .probe = adm1177_probe, |
| 281 | .id_table = adm1177_id, |
| 282 | }; |
| 283 | module_i2c_driver(adm1177_driver); |
| 284 | |
| 285 | MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>"); |
| 286 | MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); |
| 287 | MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver"); |
| 288 | MODULE_LICENSE("GPL v2"); |