| Tony Lindgren | c482525 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Common features on the Zoom debug board |
| 3 | */ |
| 4 | |
| 5 | #include "omap-gpmc-smsc911x.dtsi" |
| 6 | |
| 7 | &gpmc { |
| Tony Lindgren | e2c5eb7 | 2014-10-29 17:16:47 -0700 | [diff] [blame] | 8 | ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ |
| Tony Lindgren | c482525 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 9 | <7 0 0x2c000000 0x01000000>; |
| 10 | |
| 11 | /* |
| 12 | * Four port TL16CP754C serial port on GPMC, |
| 13 | * they probably share the same GPIO IRQ |
| 14 | * REVISIT: Add timing support from slls644g.pdf |
| 15 | */ |
| Tony Lindgren | fd4446f | 2013-11-14 15:25:09 -0800 | [diff] [blame] | 16 | uart@3,0 { |
| Tony Lindgren | c482525 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 17 | compatible = "ns16550a"; |
| Tony Lindgren | e2c5eb7 | 2014-10-29 17:16:47 -0700 | [diff] [blame] | 18 | reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ |
| Tony Lindgren | c482525 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 19 | bank-width = <2>; |
| 20 | reg-shift = <1>; |
| 21 | reg-io-width = <1>; |
| 22 | interrupt-parent = <&gpio4>; |
| 23 | interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 24 | clock-frequency = <1843200>; |
| 25 | current-speed = <115200>; |
| Tony Lindgren | b5399ea | 2014-10-29 17:16:48 -0700 | [diff] [blame] | 26 | gpmc,mux-add-data = <0>; |
| 27 | gpmc,device-width = <1>; |
| 28 | gpmc,wait-pin = <1>; |
| 29 | gpmc,cycle2cycle-samecsen = <1>; |
| 30 | gpmc,cycle2cycle-diffcsen = <1>; |
| 31 | gpmc,cs-on-ns = <5>; |
| 32 | gpmc,cs-rd-off-ns = <155>; |
| 33 | gpmc,cs-wr-off-ns = <155>; |
| 34 | gpmc,adv-on-ns = <15>; |
| 35 | gpmc,adv-rd-off-ns = <40>; |
| 36 | gpmc,adv-wr-off-ns = <40>; |
| 37 | gpmc,oe-on-ns = <45>; |
| 38 | gpmc,oe-off-ns = <145>; |
| 39 | gpmc,we-on-ns = <45>; |
| 40 | gpmc,we-off-ns = <145>; |
| 41 | gpmc,rd-cycle-ns = <155>; |
| 42 | gpmc,wr-cycle-ns = <155>; |
| 43 | gpmc,access-ns = <145>; |
| 44 | gpmc,page-burst-access-ns = <20>; |
| 45 | gpmc,bus-turnaround-ns = <20>; |
| 46 | gpmc,cycle2cycle-delay-ns = <20>; |
| 47 | gpmc,wait-monitoring-ns = <0>; |
| 48 | gpmc,clk-activation-ns = <0>; |
| 49 | gpmc,wr-data-mux-bus-ns = <45>; |
| 50 | gpmc,wr-access-ns = <145>; |
| 51 | }; |
| 52 | uart@3,1 { |
| 53 | compatible = "ns16550a"; |
| 54 | reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ |
| 55 | bank-width = <2>; |
| 56 | reg-shift = <1>; |
| 57 | reg-io-width = <1>; |
| 58 | interrupt-parent = <&gpio4>; |
| 59 | interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 60 | clock-frequency = <1843200>; |
| 61 | current-speed = <115200>; |
| 62 | }; |
| 63 | uart@3,2 { |
| 64 | compatible = "ns16550a"; |
| 65 | reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ |
| 66 | bank-width = <2>; |
| 67 | reg-shift = <1>; |
| 68 | reg-io-width = <1>; |
| 69 | interrupt-parent = <&gpio4>; |
| 70 | interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 71 | clock-frequency = <1843200>; |
| 72 | current-speed = <115200>; |
| 73 | }; |
| 74 | uart@3,3 { |
| 75 | compatible = "ns16550a"; |
| 76 | reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ |
| 77 | bank-width = <2>; |
| 78 | reg-shift = <1>; |
| 79 | reg-io-width = <1>; |
| 80 | interrupt-parent = <&gpio4>; |
| 81 | interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ |
| 82 | clock-frequency = <1843200>; |
| 83 | current-speed = <115200>; |
| Tony Lindgren | c482525 | 2013-10-14 11:31:43 -0700 | [diff] [blame] | 84 | }; |
| 85 | |
| 86 | ethernet@gpmc { |
| 87 | reg = <7 0 0xff>; |
| 88 | interrupt-parent = <&gpio5>; |
| 89 | interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ |
| 90 | }; |
| 91 | }; |