blob: 6a901da2d15a15b14fc6179c098ff4c937d339f9 [file] [log] [blame]
Thomas Gleixnerd2912cb2019-06-04 10:11:33 +02001// SPDX-License-Identifier: GPL-2.0-only
Joao Pinto4b9ffb52016-05-11 12:21:30 +01002/*
3 * UFS Host driver for Synopsys Designware Core
4 *
5 * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
6 *
7 * Authors: Joao Pinto <jpinto@synopsys.com>
Joao Pinto4b9ffb52016-05-11 12:21:30 +01008 */
9
10#include "ufshcd.h"
11#include "unipro.h"
12
13#include "ufshcd-dwc.h"
14#include "ufshci-dwc.h"
15
16int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
17 const struct ufshcd_dme_attr_val *v, int n)
18{
19 int ret = 0;
20 int attr_node = 0;
21
22 for (attr_node = 0; attr_node < n; attr_node++) {
23 ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
24 ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
25
26 if (ret)
27 return ret;
28 }
29
30 return 0;
31}
32EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
33
34/**
35 * ufshcd_dwc_program_clk_div()
36 * This function programs the clk divider value. This value is needed to
37 * provide 1 microsecond tick to unipro layer.
38 * @hba: Private Structure pointer
39 * @divider_val: clock divider value to be programmed
40 *
41 */
42static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
43{
44 ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
45}
46
47/**
48 * ufshcd_dwc_link_is_up()
49 * Check if link is up
Chengguang Xu2174b182019-02-10 23:20:45 +080050 * @hba: private structure pointer
Joao Pinto4b9ffb52016-05-11 12:21:30 +010051 *
52 * Returns 0 on success, non-zero value on failure
53 */
54static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
55{
56 int dme_result = 0;
57
58 ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
59
60 if (dme_result == UFSHCD_LINK_IS_UP) {
61 ufshcd_set_link_active(hba);
62 return 0;
63 }
64
65 return 1;
66}
67
68/**
69 * ufshcd_dwc_connection_setup()
70 * This function configures both the local side (host) and the peer side
71 * (device) unipro attributes to establish the connection to application/
72 * cport.
73 * This function is not required if the hardware is properly configured to
74 * have this connection setup on reset. But invoking this function does no
75 * harm and should be fine even working with any ufs device.
76 *
77 * @hba: pointer to drivers private data
78 *
79 * Returns 0 on success non-zero value on failure
80 */
81static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
82{
Colin Ian King7e524402019-09-06 18:01:04 +010083 static const struct ufshcd_dme_attr_val setup_attrs[] = {
Joao Pinto4b9ffb52016-05-11 12:21:30 +010084 { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
85 { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
86 { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
87 { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
88 { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
89 { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
90 { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
91 { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
92 { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
93 { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
94 { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
95 { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
96 { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
97 { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
98 { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
99 { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
100 { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
101 { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
102 };
103
104 return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
105}
106
107/**
108 * ufshcd_dwc_link_startup_notify()
109 * UFS Host DWC specific link startup sequence
Chengguang Xu2174b182019-02-10 23:20:45 +0800110 * @hba: private structure pointer
Joao Pinto4b9ffb52016-05-11 12:21:30 +0100111 * @status: Callback notify status
112 *
113 * Returns 0 on success, non-zero value on failure
114 */
115int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
116 enum ufs_notify_change_status status)
117{
118 int err = 0;
119
120 if (status == PRE_CHANGE) {
121 ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
122
123 if (hba->vops->phy_initialization) {
124 err = hba->vops->phy_initialization(hba);
125 if (err) {
126 dev_err(hba->dev, "Phy setup failed (%d)\n",
127 err);
128 goto out;
129 }
130 }
131 } else { /* POST_CHANGE */
132 err = ufshcd_dwc_link_is_up(hba);
133 if (err) {
134 dev_err(hba->dev, "Link is not up\n");
135 goto out;
136 }
137
138 err = ufshcd_dwc_connection_setup(hba);
139 if (err)
140 dev_err(hba->dev, "Connection setup failed (%d)\n",
141 err);
142 }
143
144out:
145 return err;
146}
147EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
Joao Pinto87ee3ab2016-05-23 10:18:07 +0100148
149MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
150MODULE_DESCRIPTION("UFS Host driver for Synopsys Designware Core");
151MODULE_LICENSE("Dual BSD/GPL");