Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Allwinner EMAC Fast Ethernet driver for Linux. |
| 3 | * |
| 4 | * Copyright 2012-2013 Stefan Roese <sr@denx.de> |
| 5 | * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com> |
| 6 | * |
| 7 | * Based on the Linux driver provided by Allwinner: |
| 8 | * Copyright (C) 1997 Sten Wang |
| 9 | * |
| 10 | * This file is licensed under the terms of the GNU General Public |
| 11 | * License version 2. This program is licensed "as is" without any |
| 12 | * warranty of any kind, whether express or implied. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/clk.h> |
| 16 | #include <linux/etherdevice.h> |
| 17 | #include <linux/ethtool.h> |
| 18 | #include <linux/gpio.h> |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/irq.h> |
| 21 | #include <linux/mii.h> |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/netdevice.h> |
| 24 | #include <linux/of_address.h> |
| 25 | #include <linux/of_irq.h> |
| 26 | #include <linux/of_mdio.h> |
| 27 | #include <linux/of_net.h> |
| 28 | #include <linux/of_platform.h> |
| 29 | #include <linux/platform_device.h> |
| 30 | #include <linux/phy.h> |
| 31 | |
| 32 | #include "sun4i-emac.h" |
| 33 | |
| 34 | #define DRV_NAME "sun4i-emac" |
| 35 | #define DRV_VERSION "1.02" |
| 36 | |
| 37 | #define EMAC_MAX_FRAME_LEN 0x0600 |
| 38 | |
| 39 | /* Transmit timeout, default 5 seconds. */ |
| 40 | static int watchdog = 5000; |
| 41 | module_param(watchdog, int, 0400); |
| 42 | MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); |
| 43 | |
| 44 | /* EMAC register address locking. |
| 45 | * |
| 46 | * The EMAC uses an address register to control where data written |
| 47 | * to the data register goes. This means that the address register |
| 48 | * must be preserved over interrupts or similar calls. |
| 49 | * |
| 50 | * During interrupt and other critical calls, a spinlock is used to |
| 51 | * protect the system, but the calls themselves save the address |
| 52 | * in the address register in case they are interrupting another |
| 53 | * access to the device. |
| 54 | * |
| 55 | * For general accesses a lock is provided so that calls which are |
| 56 | * allowed to sleep are serialised so that the address register does |
| 57 | * not need to be saved. This lock also serves to serialise access |
| 58 | * to the EEPROM and PHY access registers which are shared between |
| 59 | * these two devices. |
| 60 | */ |
| 61 | |
| 62 | /* The driver supports the original EMACE, and now the two newer |
| 63 | * devices, EMACA and EMACB. |
| 64 | */ |
| 65 | |
| 66 | struct emac_board_info { |
| 67 | struct clk *clk; |
| 68 | struct device *dev; |
| 69 | struct platform_device *pdev; |
| 70 | spinlock_t lock; |
| 71 | void __iomem *membase; |
| 72 | u32 msg_enable; |
| 73 | struct net_device *ndev; |
| 74 | struct sk_buff *skb_last; |
| 75 | u16 tx_fifo_stat; |
| 76 | |
| 77 | int emacrx_completed_flag; |
| 78 | |
| 79 | struct phy_device *phy_dev; |
| 80 | struct device_node *phy_node; |
| 81 | unsigned int link; |
| 82 | unsigned int speed; |
| 83 | unsigned int duplex; |
| 84 | |
| 85 | phy_interface_t phy_interface; |
| 86 | }; |
| 87 | |
| 88 | static void emac_update_speed(struct net_device *dev) |
| 89 | { |
| 90 | struct emac_board_info *db = netdev_priv(dev); |
| 91 | unsigned int reg_val; |
| 92 | |
| 93 | /* set EMAC SPEED, depend on PHY */ |
| 94 | reg_val = readl(db->membase + EMAC_MAC_SUPP_REG); |
| 95 | reg_val &= ~(0x1 << 8); |
| 96 | if (db->speed == SPEED_100) |
| 97 | reg_val |= 1 << 8; |
| 98 | writel(reg_val, db->membase + EMAC_MAC_SUPP_REG); |
| 99 | } |
| 100 | |
| 101 | static void emac_update_duplex(struct net_device *dev) |
| 102 | { |
| 103 | struct emac_board_info *db = netdev_priv(dev); |
| 104 | unsigned int reg_val; |
| 105 | |
| 106 | /* set duplex depend on phy */ |
| 107 | reg_val = readl(db->membase + EMAC_MAC_CTL1_REG); |
| 108 | reg_val &= ~EMAC_MAC_CTL1_DUPLEX_EN; |
| 109 | if (db->duplex) |
| 110 | reg_val |= EMAC_MAC_CTL1_DUPLEX_EN; |
| 111 | writel(reg_val, db->membase + EMAC_MAC_CTL1_REG); |
| 112 | } |
| 113 | |
| 114 | static void emac_handle_link_change(struct net_device *dev) |
| 115 | { |
| 116 | struct emac_board_info *db = netdev_priv(dev); |
| 117 | struct phy_device *phydev = db->phy_dev; |
| 118 | unsigned long flags; |
| 119 | int status_change = 0; |
| 120 | |
| 121 | if (phydev->link) { |
| 122 | if (db->speed != phydev->speed) { |
| 123 | spin_lock_irqsave(&db->lock, flags); |
| 124 | db->speed = phydev->speed; |
| 125 | emac_update_speed(dev); |
| 126 | spin_unlock_irqrestore(&db->lock, flags); |
| 127 | status_change = 1; |
| 128 | } |
| 129 | |
| 130 | if (db->duplex != phydev->duplex) { |
| 131 | spin_lock_irqsave(&db->lock, flags); |
| 132 | db->duplex = phydev->duplex; |
| 133 | emac_update_duplex(dev); |
| 134 | spin_unlock_irqrestore(&db->lock, flags); |
| 135 | status_change = 1; |
| 136 | } |
| 137 | } |
| 138 | |
| 139 | if (phydev->link != db->link) { |
| 140 | if (!phydev->link) { |
| 141 | db->speed = 0; |
| 142 | db->duplex = -1; |
| 143 | } |
| 144 | db->link = phydev->link; |
| 145 | |
| 146 | status_change = 1; |
| 147 | } |
| 148 | |
| 149 | if (status_change) |
| 150 | phy_print_status(phydev); |
| 151 | } |
| 152 | |
| 153 | static int emac_mdio_probe(struct net_device *dev) |
| 154 | { |
| 155 | struct emac_board_info *db = netdev_priv(dev); |
| 156 | |
| 157 | /* to-do: PHY interrupts are currently not supported */ |
| 158 | |
| 159 | /* attach the mac to the phy */ |
| 160 | db->phy_dev = of_phy_connect(db->ndev, db->phy_node, |
| 161 | &emac_handle_link_change, 0, |
| 162 | db->phy_interface); |
| 163 | if (!db->phy_dev) { |
| 164 | netdev_err(db->ndev, "could not find the PHY\n"); |
| 165 | return -ENODEV; |
| 166 | } |
| 167 | |
| 168 | /* mask with MAC supported features */ |
| 169 | db->phy_dev->supported &= PHY_BASIC_FEATURES; |
| 170 | db->phy_dev->advertising = db->phy_dev->supported; |
| 171 | |
| 172 | db->link = 0; |
| 173 | db->speed = 0; |
| 174 | db->duplex = -1; |
| 175 | |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | static void emac_mdio_remove(struct net_device *dev) |
| 180 | { |
| 181 | struct emac_board_info *db = netdev_priv(dev); |
| 182 | |
| 183 | phy_disconnect(db->phy_dev); |
| 184 | db->phy_dev = NULL; |
| 185 | } |
| 186 | |
| 187 | static void emac_reset(struct emac_board_info *db) |
| 188 | { |
| 189 | dev_dbg(db->dev, "resetting device\n"); |
| 190 | |
| 191 | /* RESET device */ |
| 192 | writel(0, db->membase + EMAC_CTL_REG); |
| 193 | udelay(200); |
| 194 | writel(EMAC_CTL_RESET, db->membase + EMAC_CTL_REG); |
| 195 | udelay(200); |
| 196 | } |
| 197 | |
| 198 | static void emac_outblk_32bit(void __iomem *reg, void *data, int count) |
| 199 | { |
| 200 | writesl(reg, data, round_up(count, 4) / 4); |
| 201 | } |
| 202 | |
| 203 | static void emac_inblk_32bit(void __iomem *reg, void *data, int count) |
| 204 | { |
| 205 | readsl(reg, data, round_up(count, 4) / 4); |
| 206 | } |
| 207 | |
| 208 | static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| 209 | { |
| 210 | struct emac_board_info *dm = netdev_priv(dev); |
| 211 | struct phy_device *phydev = dm->phy_dev; |
| 212 | |
| 213 | if (!netif_running(dev)) |
| 214 | return -EINVAL; |
| 215 | |
| 216 | if (!phydev) |
| 217 | return -ENODEV; |
| 218 | |
| 219 | return phy_mii_ioctl(phydev, rq, cmd); |
| 220 | } |
| 221 | |
| 222 | /* ethtool ops */ |
| 223 | static void emac_get_drvinfo(struct net_device *dev, |
| 224 | struct ethtool_drvinfo *info) |
| 225 | { |
| 226 | strlcpy(info->driver, DRV_NAME, sizeof(DRV_NAME)); |
| 227 | strlcpy(info->version, DRV_VERSION, sizeof(DRV_VERSION)); |
| 228 | strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info)); |
| 229 | } |
| 230 | |
| 231 | static int emac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 232 | { |
| 233 | struct emac_board_info *dm = netdev_priv(dev); |
| 234 | struct phy_device *phydev = dm->phy_dev; |
| 235 | |
| 236 | if (!phydev) |
| 237 | return -ENODEV; |
| 238 | |
| 239 | return phy_ethtool_gset(phydev, cmd); |
| 240 | } |
| 241 | |
| 242 | static int emac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 243 | { |
| 244 | struct emac_board_info *dm = netdev_priv(dev); |
| 245 | struct phy_device *phydev = dm->phy_dev; |
| 246 | |
| 247 | if (!phydev) |
| 248 | return -ENODEV; |
| 249 | |
| 250 | return phy_ethtool_sset(phydev, cmd); |
| 251 | } |
| 252 | |
| 253 | static const struct ethtool_ops emac_ethtool_ops = { |
| 254 | .get_drvinfo = emac_get_drvinfo, |
| 255 | .get_settings = emac_get_settings, |
| 256 | .set_settings = emac_set_settings, |
| 257 | .get_link = ethtool_op_get_link, |
| 258 | }; |
| 259 | |
Sachin Kamat | 11a164a | 2013-06-04 00:31:20 +0000 | [diff] [blame] | 260 | static unsigned int emac_setup(struct net_device *ndev) |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 261 | { |
| 262 | struct emac_board_info *db = netdev_priv(ndev); |
| 263 | unsigned int reg_val; |
| 264 | |
| 265 | /* set up TX */ |
| 266 | reg_val = readl(db->membase + EMAC_TX_MODE_REG); |
| 267 | |
| 268 | writel(reg_val | EMAC_TX_MODE_ABORTED_FRAME_EN, |
| 269 | db->membase + EMAC_TX_MODE_REG); |
| 270 | |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 271 | /* set MAC */ |
| 272 | /* set MAC CTL0 */ |
| 273 | reg_val = readl(db->membase + EMAC_MAC_CTL0_REG); |
| 274 | writel(reg_val | EMAC_MAC_CTL0_RX_FLOW_CTL_EN | |
| 275 | EMAC_MAC_CTL0_TX_FLOW_CTL_EN, |
| 276 | db->membase + EMAC_MAC_CTL0_REG); |
| 277 | |
| 278 | /* set MAC CTL1 */ |
| 279 | reg_val = readl(db->membase + EMAC_MAC_CTL1_REG); |
| 280 | reg_val |= EMAC_MAC_CTL1_LEN_CHECK_EN; |
| 281 | reg_val |= EMAC_MAC_CTL1_CRC_EN; |
| 282 | reg_val |= EMAC_MAC_CTL1_PAD_EN; |
| 283 | writel(reg_val, db->membase + EMAC_MAC_CTL1_REG); |
| 284 | |
| 285 | /* set up IPGT */ |
| 286 | writel(EMAC_MAC_IPGT_FULL_DUPLEX, db->membase + EMAC_MAC_IPGT_REG); |
| 287 | |
| 288 | /* set up IPGR */ |
| 289 | writel((EMAC_MAC_IPGR_IPG1 << 8) | EMAC_MAC_IPGR_IPG2, |
| 290 | db->membase + EMAC_MAC_IPGR_REG); |
| 291 | |
| 292 | /* set up Collison window */ |
| 293 | writel((EMAC_MAC_CLRT_COLLISION_WINDOW << 8) | EMAC_MAC_CLRT_RM, |
| 294 | db->membase + EMAC_MAC_CLRT_REG); |
| 295 | |
| 296 | /* set up Max Frame Length */ |
| 297 | writel(EMAC_MAX_FRAME_LEN, |
| 298 | db->membase + EMAC_MAC_MAXF_REG); |
| 299 | |
| 300 | return 0; |
| 301 | } |
| 302 | |
Marc Zyngier | cec9ae5 | 2014-04-11 10:46:17 +0100 | [diff] [blame] | 303 | static void emac_set_rx_mode(struct net_device *ndev) |
| 304 | { |
| 305 | struct emac_board_info *db = netdev_priv(ndev); |
| 306 | unsigned int reg_val; |
| 307 | |
| 308 | /* set up RX */ |
| 309 | reg_val = readl(db->membase + EMAC_RX_CTL_REG); |
| 310 | |
| 311 | if (ndev->flags & IFF_PROMISC) |
| 312 | reg_val |= EMAC_RX_CTL_PASS_ALL_EN; |
| 313 | else |
| 314 | reg_val &= ~EMAC_RX_CTL_PASS_ALL_EN; |
| 315 | |
| 316 | writel(reg_val | EMAC_RX_CTL_PASS_LEN_OOR_EN | |
| 317 | EMAC_RX_CTL_ACCEPT_UNICAST_EN | EMAC_RX_CTL_DA_FILTER_EN | |
| 318 | EMAC_RX_CTL_ACCEPT_MULTICAST_EN | |
| 319 | EMAC_RX_CTL_ACCEPT_BROADCAST_EN, |
| 320 | db->membase + EMAC_RX_CTL_REG); |
| 321 | } |
| 322 | |
Sachin Kamat | 11a164a | 2013-06-04 00:31:20 +0000 | [diff] [blame] | 323 | static unsigned int emac_powerup(struct net_device *ndev) |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 324 | { |
| 325 | struct emac_board_info *db = netdev_priv(ndev); |
| 326 | unsigned int reg_val; |
| 327 | |
| 328 | /* initial EMAC */ |
| 329 | /* flush RX FIFO */ |
| 330 | reg_val = readl(db->membase + EMAC_RX_CTL_REG); |
| 331 | reg_val |= 0x8; |
| 332 | writel(reg_val, db->membase + EMAC_RX_CTL_REG); |
| 333 | udelay(1); |
| 334 | |
| 335 | /* initial MAC */ |
| 336 | /* soft reset MAC */ |
| 337 | reg_val = readl(db->membase + EMAC_MAC_CTL0_REG); |
| 338 | reg_val &= ~EMAC_MAC_CTL0_SOFT_RESET; |
| 339 | writel(reg_val, db->membase + EMAC_MAC_CTL0_REG); |
| 340 | |
| 341 | /* set MII clock */ |
| 342 | reg_val = readl(db->membase + EMAC_MAC_MCFG_REG); |
| 343 | reg_val &= (~(0xf << 2)); |
| 344 | reg_val |= (0xD << 2); |
| 345 | writel(reg_val, db->membase + EMAC_MAC_MCFG_REG); |
| 346 | |
| 347 | /* clear RX counter */ |
| 348 | writel(0x0, db->membase + EMAC_RX_FBC_REG); |
| 349 | |
| 350 | /* disable all interrupt and clear interrupt status */ |
| 351 | writel(0, db->membase + EMAC_INT_CTL_REG); |
| 352 | reg_val = readl(db->membase + EMAC_INT_STA_REG); |
| 353 | writel(reg_val, db->membase + EMAC_INT_STA_REG); |
| 354 | |
| 355 | udelay(1); |
| 356 | |
| 357 | /* set up EMAC */ |
| 358 | emac_setup(ndev); |
| 359 | |
| 360 | /* set mac_address to chip */ |
| 361 | writel(ndev->dev_addr[0] << 16 | ndev->dev_addr[1] << 8 | ndev-> |
| 362 | dev_addr[2], db->membase + EMAC_MAC_A1_REG); |
| 363 | writel(ndev->dev_addr[3] << 16 | ndev->dev_addr[4] << 8 | ndev-> |
| 364 | dev_addr[5], db->membase + EMAC_MAC_A0_REG); |
| 365 | |
| 366 | mdelay(1); |
| 367 | |
| 368 | return 0; |
| 369 | } |
| 370 | |
| 371 | static int emac_set_mac_address(struct net_device *dev, void *p) |
| 372 | { |
| 373 | struct sockaddr *addr = p; |
| 374 | struct emac_board_info *db = netdev_priv(dev); |
| 375 | |
| 376 | if (netif_running(dev)) |
| 377 | return -EBUSY; |
| 378 | |
| 379 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| 380 | |
| 381 | writel(dev->dev_addr[0] << 16 | dev->dev_addr[1] << 8 | dev-> |
| 382 | dev_addr[2], db->membase + EMAC_MAC_A1_REG); |
| 383 | writel(dev->dev_addr[3] << 16 | dev->dev_addr[4] << 8 | dev-> |
| 384 | dev_addr[5], db->membase + EMAC_MAC_A0_REG); |
| 385 | |
| 386 | return 0; |
| 387 | } |
| 388 | |
| 389 | /* Initialize emac board */ |
| 390 | static void emac_init_device(struct net_device *dev) |
| 391 | { |
| 392 | struct emac_board_info *db = netdev_priv(dev); |
| 393 | unsigned long flags; |
| 394 | unsigned int reg_val; |
| 395 | |
| 396 | spin_lock_irqsave(&db->lock, flags); |
| 397 | |
| 398 | emac_update_speed(dev); |
| 399 | emac_update_duplex(dev); |
| 400 | |
| 401 | /* enable RX/TX */ |
| 402 | reg_val = readl(db->membase + EMAC_CTL_REG); |
| 403 | writel(reg_val | EMAC_CTL_RESET | EMAC_CTL_TX_EN | EMAC_CTL_RX_EN, |
| 404 | db->membase + EMAC_CTL_REG); |
| 405 | |
| 406 | /* enable RX/TX0/RX Hlevel interrup */ |
| 407 | reg_val = readl(db->membase + EMAC_INT_CTL_REG); |
| 408 | reg_val |= (0xf << 0) | (0x01 << 8); |
| 409 | writel(reg_val, db->membase + EMAC_INT_CTL_REG); |
| 410 | |
| 411 | spin_unlock_irqrestore(&db->lock, flags); |
| 412 | } |
| 413 | |
| 414 | /* Our watchdog timed out. Called by the networking layer */ |
| 415 | static void emac_timeout(struct net_device *dev) |
| 416 | { |
| 417 | struct emac_board_info *db = netdev_priv(dev); |
| 418 | unsigned long flags; |
| 419 | |
| 420 | if (netif_msg_timer(db)) |
| 421 | dev_err(db->dev, "tx time out.\n"); |
| 422 | |
| 423 | /* Save previous register address */ |
| 424 | spin_lock_irqsave(&db->lock, flags); |
| 425 | |
| 426 | netif_stop_queue(dev); |
| 427 | emac_reset(db); |
| 428 | emac_init_device(dev); |
| 429 | /* We can accept TX packets again */ |
| 430 | dev->trans_start = jiffies; |
| 431 | netif_wake_queue(dev); |
| 432 | |
| 433 | /* Restore previous register address */ |
| 434 | spin_unlock_irqrestore(&db->lock, flags); |
| 435 | } |
| 436 | |
| 437 | /* Hardware start transmission. |
| 438 | * Send a packet to media from the upper layer. |
| 439 | */ |
| 440 | static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 441 | { |
| 442 | struct emac_board_info *db = netdev_priv(dev); |
| 443 | unsigned long channel; |
| 444 | unsigned long flags; |
| 445 | |
| 446 | channel = db->tx_fifo_stat & 3; |
| 447 | if (channel == 3) |
| 448 | return 1; |
| 449 | |
| 450 | channel = (channel == 1 ? 1 : 0); |
| 451 | |
| 452 | spin_lock_irqsave(&db->lock, flags); |
| 453 | |
| 454 | writel(channel, db->membase + EMAC_TX_INS_REG); |
| 455 | |
| 456 | emac_outblk_32bit(db->membase + EMAC_TX_IO_DATA_REG, |
| 457 | skb->data, skb->len); |
| 458 | dev->stats.tx_bytes += skb->len; |
| 459 | |
| 460 | db->tx_fifo_stat |= 1 << channel; |
| 461 | /* TX control: First packet immediately send, second packet queue */ |
| 462 | if (channel == 0) { |
| 463 | /* set TX len */ |
| 464 | writel(skb->len, db->membase + EMAC_TX_PL0_REG); |
| 465 | /* start translate from fifo to phy */ |
| 466 | writel(readl(db->membase + EMAC_TX_CTL0_REG) | 1, |
| 467 | db->membase + EMAC_TX_CTL0_REG); |
| 468 | |
| 469 | /* save the time stamp */ |
| 470 | dev->trans_start = jiffies; |
| 471 | } else if (channel == 1) { |
| 472 | /* set TX len */ |
| 473 | writel(skb->len, db->membase + EMAC_TX_PL1_REG); |
| 474 | /* start translate from fifo to phy */ |
| 475 | writel(readl(db->membase + EMAC_TX_CTL1_REG) | 1, |
| 476 | db->membase + EMAC_TX_CTL1_REG); |
| 477 | |
| 478 | /* save the time stamp */ |
| 479 | dev->trans_start = jiffies; |
| 480 | } |
| 481 | |
| 482 | if ((db->tx_fifo_stat & 3) == 3) { |
| 483 | /* Second packet */ |
| 484 | netif_stop_queue(dev); |
| 485 | } |
| 486 | |
| 487 | spin_unlock_irqrestore(&db->lock, flags); |
| 488 | |
| 489 | /* free this SKB */ |
Eric W. Biederman | c99abc8 | 2014-03-24 21:13:02 -0700 | [diff] [blame] | 490 | dev_consume_skb_any(skb); |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 491 | |
| 492 | return NETDEV_TX_OK; |
| 493 | } |
| 494 | |
| 495 | /* EMAC interrupt handler |
| 496 | * receive the packet to upper layer, free the transmitted packet |
| 497 | */ |
| 498 | static void emac_tx_done(struct net_device *dev, struct emac_board_info *db, |
| 499 | unsigned int tx_status) |
| 500 | { |
| 501 | /* One packet sent complete */ |
| 502 | db->tx_fifo_stat &= ~(tx_status & 3); |
| 503 | if (3 == (tx_status & 3)) |
| 504 | dev->stats.tx_packets += 2; |
| 505 | else |
| 506 | dev->stats.tx_packets++; |
| 507 | |
| 508 | if (netif_msg_tx_done(db)) |
| 509 | dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status); |
| 510 | |
| 511 | netif_wake_queue(dev); |
| 512 | } |
| 513 | |
| 514 | /* Received a packet and pass to upper layer |
| 515 | */ |
| 516 | static void emac_rx(struct net_device *dev) |
| 517 | { |
| 518 | struct emac_board_info *db = netdev_priv(dev); |
| 519 | struct sk_buff *skb; |
| 520 | u8 *rdptr; |
| 521 | bool good_packet; |
| 522 | static int rxlen_last; |
| 523 | unsigned int reg_val; |
| 524 | u32 rxhdr, rxstatus, rxcount, rxlen; |
| 525 | |
| 526 | /* Check packet ready or not */ |
| 527 | while (1) { |
| 528 | /* race warning: the first packet might arrive with |
| 529 | * the interrupts disabled, but the second will fix |
| 530 | * it |
| 531 | */ |
| 532 | rxcount = readl(db->membase + EMAC_RX_FBC_REG); |
| 533 | |
| 534 | if (netif_msg_rx_status(db)) |
| 535 | dev_dbg(db->dev, "RXCount: %x\n", rxcount); |
| 536 | |
| 537 | if ((db->skb_last != NULL) && (rxlen_last > 0)) { |
| 538 | dev->stats.rx_bytes += rxlen_last; |
| 539 | |
| 540 | /* Pass to upper layer */ |
| 541 | db->skb_last->protocol = eth_type_trans(db->skb_last, |
| 542 | dev); |
| 543 | netif_rx(db->skb_last); |
| 544 | dev->stats.rx_packets++; |
| 545 | db->skb_last = NULL; |
| 546 | rxlen_last = 0; |
| 547 | |
| 548 | reg_val = readl(db->membase + EMAC_RX_CTL_REG); |
| 549 | reg_val &= ~EMAC_RX_CTL_DMA_EN; |
| 550 | writel(reg_val, db->membase + EMAC_RX_CTL_REG); |
| 551 | } |
| 552 | |
| 553 | if (!rxcount) { |
| 554 | db->emacrx_completed_flag = 1; |
| 555 | reg_val = readl(db->membase + EMAC_INT_CTL_REG); |
| 556 | reg_val |= (0xf << 0) | (0x01 << 8); |
| 557 | writel(reg_val, db->membase + EMAC_INT_CTL_REG); |
| 558 | |
| 559 | /* had one stuck? */ |
| 560 | rxcount = readl(db->membase + EMAC_RX_FBC_REG); |
| 561 | if (!rxcount) |
| 562 | return; |
| 563 | } |
| 564 | |
| 565 | reg_val = readl(db->membase + EMAC_RX_IO_DATA_REG); |
| 566 | if (netif_msg_rx_status(db)) |
| 567 | dev_dbg(db->dev, "receive header: %x\n", reg_val); |
| 568 | if (reg_val != EMAC_UNDOCUMENTED_MAGIC) { |
| 569 | /* disable RX */ |
| 570 | reg_val = readl(db->membase + EMAC_CTL_REG); |
| 571 | writel(reg_val & ~EMAC_CTL_RX_EN, |
| 572 | db->membase + EMAC_CTL_REG); |
| 573 | |
| 574 | /* Flush RX FIFO */ |
| 575 | reg_val = readl(db->membase + EMAC_RX_CTL_REG); |
| 576 | writel(reg_val | (1 << 3), |
| 577 | db->membase + EMAC_RX_CTL_REG); |
| 578 | |
| 579 | do { |
| 580 | reg_val = readl(db->membase + EMAC_RX_CTL_REG); |
| 581 | } while (reg_val & (1 << 3)); |
| 582 | |
| 583 | /* enable RX */ |
| 584 | reg_val = readl(db->membase + EMAC_CTL_REG); |
| 585 | writel(reg_val | EMAC_CTL_RX_EN, |
| 586 | db->membase + EMAC_CTL_REG); |
| 587 | reg_val = readl(db->membase + EMAC_INT_CTL_REG); |
| 588 | reg_val |= (0xf << 0) | (0x01 << 8); |
| 589 | writel(reg_val, db->membase + EMAC_INT_CTL_REG); |
| 590 | |
| 591 | db->emacrx_completed_flag = 1; |
| 592 | |
| 593 | return; |
| 594 | } |
| 595 | |
| 596 | /* A packet ready now & Get status/length */ |
| 597 | good_packet = true; |
| 598 | |
| 599 | emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG, |
| 600 | &rxhdr, sizeof(rxhdr)); |
| 601 | |
| 602 | if (netif_msg_rx_status(db)) |
| 603 | dev_dbg(db->dev, "rxhdr: %x\n", *((int *)(&rxhdr))); |
| 604 | |
| 605 | rxlen = EMAC_RX_IO_DATA_LEN(rxhdr); |
| 606 | rxstatus = EMAC_RX_IO_DATA_STATUS(rxhdr); |
| 607 | |
| 608 | if (netif_msg_rx_status(db)) |
| 609 | dev_dbg(db->dev, "RX: status %02x, length %04x\n", |
| 610 | rxstatus, rxlen); |
| 611 | |
| 612 | /* Packet Status check */ |
| 613 | if (rxlen < 0x40) { |
| 614 | good_packet = false; |
| 615 | if (netif_msg_rx_err(db)) |
| 616 | dev_dbg(db->dev, "RX: Bad Packet (runt)\n"); |
| 617 | } |
| 618 | |
| 619 | if (unlikely(!(rxstatus & EMAC_RX_IO_DATA_STATUS_OK))) { |
| 620 | good_packet = false; |
| 621 | |
| 622 | if (rxstatus & EMAC_RX_IO_DATA_STATUS_CRC_ERR) { |
| 623 | if (netif_msg_rx_err(db)) |
| 624 | dev_dbg(db->dev, "crc error\n"); |
| 625 | dev->stats.rx_crc_errors++; |
| 626 | } |
| 627 | |
| 628 | if (rxstatus & EMAC_RX_IO_DATA_STATUS_LEN_ERR) { |
| 629 | if (netif_msg_rx_err(db)) |
| 630 | dev_dbg(db->dev, "length error\n"); |
| 631 | dev->stats.rx_length_errors++; |
| 632 | } |
| 633 | } |
| 634 | |
| 635 | /* Move data from EMAC */ |
| 636 | skb = dev_alloc_skb(rxlen + 4); |
| 637 | if (good_packet && skb) { |
| 638 | skb_reserve(skb, 2); |
| 639 | rdptr = (u8 *) skb_put(skb, rxlen - 4); |
| 640 | |
| 641 | /* Read received packet from RX SRAM */ |
| 642 | if (netif_msg_rx_status(db)) |
| 643 | dev_dbg(db->dev, "RxLen %x\n", rxlen); |
| 644 | |
| 645 | emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG, |
| 646 | rdptr, rxlen); |
| 647 | dev->stats.rx_bytes += rxlen; |
| 648 | |
| 649 | /* Pass to upper layer */ |
| 650 | skb->protocol = eth_type_trans(skb, dev); |
| 651 | netif_rx(skb); |
| 652 | dev->stats.rx_packets++; |
| 653 | } |
| 654 | } |
| 655 | } |
| 656 | |
| 657 | static irqreturn_t emac_interrupt(int irq, void *dev_id) |
| 658 | { |
| 659 | struct net_device *dev = dev_id; |
| 660 | struct emac_board_info *db = netdev_priv(dev); |
| 661 | int int_status; |
| 662 | unsigned long flags; |
| 663 | unsigned int reg_val; |
| 664 | |
| 665 | /* A real interrupt coming */ |
| 666 | |
| 667 | /* holders of db->lock must always block IRQs */ |
| 668 | spin_lock_irqsave(&db->lock, flags); |
| 669 | |
| 670 | /* Disable all interrupts */ |
| 671 | writel(0, db->membase + EMAC_INT_CTL_REG); |
| 672 | |
| 673 | /* Got EMAC interrupt status */ |
| 674 | /* Got ISR */ |
| 675 | int_status = readl(db->membase + EMAC_INT_STA_REG); |
| 676 | /* Clear ISR status */ |
| 677 | writel(int_status, db->membase + EMAC_INT_STA_REG); |
| 678 | |
| 679 | if (netif_msg_intr(db)) |
| 680 | dev_dbg(db->dev, "emac interrupt %02x\n", int_status); |
| 681 | |
| 682 | /* Received the coming packet */ |
| 683 | if ((int_status & 0x100) && (db->emacrx_completed_flag == 1)) { |
| 684 | /* carrier lost */ |
| 685 | db->emacrx_completed_flag = 0; |
| 686 | emac_rx(dev); |
| 687 | } |
| 688 | |
| 689 | /* Transmit Interrupt check */ |
| 690 | if (int_status & (0x01 | 0x02)) |
| 691 | emac_tx_done(dev, db, int_status); |
| 692 | |
| 693 | if (int_status & (0x04 | 0x08)) |
| 694 | netdev_info(dev, " ab : %x\n", int_status); |
| 695 | |
| 696 | /* Re-enable interrupt mask */ |
| 697 | if (db->emacrx_completed_flag == 1) { |
| 698 | reg_val = readl(db->membase + EMAC_INT_CTL_REG); |
| 699 | reg_val |= (0xf << 0) | (0x01 << 8); |
| 700 | writel(reg_val, db->membase + EMAC_INT_CTL_REG); |
| 701 | } |
| 702 | spin_unlock_irqrestore(&db->lock, flags); |
| 703 | |
| 704 | return IRQ_HANDLED; |
| 705 | } |
| 706 | |
| 707 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 708 | /* |
| 709 | * Used by netconsole |
| 710 | */ |
| 711 | static void emac_poll_controller(struct net_device *dev) |
| 712 | { |
| 713 | disable_irq(dev->irq); |
| 714 | emac_interrupt(dev->irq, dev); |
| 715 | enable_irq(dev->irq); |
| 716 | } |
| 717 | #endif |
| 718 | |
| 719 | /* Open the interface. |
| 720 | * The interface is opened whenever "ifconfig" actives it. |
| 721 | */ |
| 722 | static int emac_open(struct net_device *dev) |
| 723 | { |
| 724 | struct emac_board_info *db = netdev_priv(dev); |
| 725 | int ret; |
| 726 | |
| 727 | if (netif_msg_ifup(db)) |
| 728 | dev_dbg(db->dev, "enabling %s\n", dev->name); |
| 729 | |
Maxime Ripard | e9c56f8 | 2013-12-10 19:40:43 +0100 | [diff] [blame] | 730 | if (request_irq(dev->irq, &emac_interrupt, 0, dev->name, dev)) |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 731 | return -EAGAIN; |
| 732 | |
| 733 | /* Initialize EMAC board */ |
| 734 | emac_reset(db); |
| 735 | emac_init_device(dev); |
| 736 | |
| 737 | ret = emac_mdio_probe(dev); |
| 738 | if (ret < 0) { |
Maxime Ripard | b911132 | 2014-06-23 22:49:40 +0200 | [diff] [blame] | 739 | free_irq(dev->irq, dev); |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 740 | netdev_err(dev, "cannot probe MDIO bus\n"); |
| 741 | return ret; |
| 742 | } |
| 743 | |
| 744 | phy_start(db->phy_dev); |
| 745 | netif_start_queue(dev); |
| 746 | |
| 747 | return 0; |
| 748 | } |
| 749 | |
| 750 | static void emac_shutdown(struct net_device *dev) |
| 751 | { |
| 752 | unsigned int reg_val; |
| 753 | struct emac_board_info *db = netdev_priv(dev); |
| 754 | |
| 755 | /* Disable all interrupt */ |
| 756 | writel(0, db->membase + EMAC_INT_CTL_REG); |
| 757 | |
| 758 | /* clear interupt status */ |
| 759 | reg_val = readl(db->membase + EMAC_INT_STA_REG); |
| 760 | writel(reg_val, db->membase + EMAC_INT_STA_REG); |
| 761 | |
| 762 | /* Disable RX/TX */ |
| 763 | reg_val = readl(db->membase + EMAC_CTL_REG); |
| 764 | reg_val &= ~(EMAC_CTL_TX_EN | EMAC_CTL_RX_EN | EMAC_CTL_RESET); |
| 765 | writel(reg_val, db->membase + EMAC_CTL_REG); |
| 766 | } |
| 767 | |
| 768 | /* Stop the interface. |
| 769 | * The interface is stopped when it is brought. |
| 770 | */ |
| 771 | static int emac_stop(struct net_device *ndev) |
| 772 | { |
| 773 | struct emac_board_info *db = netdev_priv(ndev); |
| 774 | |
| 775 | if (netif_msg_ifdown(db)) |
| 776 | dev_dbg(db->dev, "shutting down %s\n", ndev->name); |
| 777 | |
| 778 | netif_stop_queue(ndev); |
| 779 | netif_carrier_off(ndev); |
| 780 | |
| 781 | phy_stop(db->phy_dev); |
| 782 | |
| 783 | emac_mdio_remove(ndev); |
| 784 | |
| 785 | emac_shutdown(ndev); |
| 786 | |
Maxime Ripard | e9c56f8 | 2013-12-10 19:40:43 +0100 | [diff] [blame] | 787 | free_irq(ndev->irq, ndev); |
| 788 | |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 789 | return 0; |
| 790 | } |
| 791 | |
| 792 | static const struct net_device_ops emac_netdev_ops = { |
| 793 | .ndo_open = emac_open, |
| 794 | .ndo_stop = emac_stop, |
| 795 | .ndo_start_xmit = emac_start_xmit, |
| 796 | .ndo_tx_timeout = emac_timeout, |
Marc Zyngier | cec9ae5 | 2014-04-11 10:46:17 +0100 | [diff] [blame] | 797 | .ndo_set_rx_mode = emac_set_rx_mode, |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 798 | .ndo_do_ioctl = emac_ioctl, |
| 799 | .ndo_change_mtu = eth_change_mtu, |
| 800 | .ndo_validate_addr = eth_validate_addr, |
| 801 | .ndo_set_mac_address = emac_set_mac_address, |
| 802 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 803 | .ndo_poll_controller = emac_poll_controller, |
| 804 | #endif |
| 805 | }; |
| 806 | |
| 807 | /* Search EMAC board, allocate space and register it |
| 808 | */ |
| 809 | static int emac_probe(struct platform_device *pdev) |
| 810 | { |
| 811 | struct device_node *np = pdev->dev.of_node; |
| 812 | struct emac_board_info *db; |
| 813 | struct net_device *ndev; |
| 814 | int ret = 0; |
| 815 | const char *mac_addr; |
| 816 | |
| 817 | ndev = alloc_etherdev(sizeof(struct emac_board_info)); |
| 818 | if (!ndev) { |
| 819 | dev_err(&pdev->dev, "could not allocate device.\n"); |
| 820 | return -ENOMEM; |
| 821 | } |
| 822 | |
| 823 | SET_NETDEV_DEV(ndev, &pdev->dev); |
| 824 | |
| 825 | db = netdev_priv(ndev); |
| 826 | memset(db, 0, sizeof(*db)); |
| 827 | |
| 828 | db->dev = &pdev->dev; |
| 829 | db->ndev = ndev; |
| 830 | db->pdev = pdev; |
| 831 | |
| 832 | spin_lock_init(&db->lock); |
| 833 | |
| 834 | db->membase = of_iomap(np, 0); |
| 835 | if (!db->membase) { |
| 836 | dev_err(&pdev->dev, "failed to remap registers\n"); |
Wei Yongjun | 93baf4c | 2013-06-03 03:36:52 +0000 | [diff] [blame] | 837 | ret = -ENOMEM; |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 838 | goto out; |
| 839 | } |
| 840 | |
| 841 | /* fill in parameters for net-dev structure */ |
| 842 | ndev->base_addr = (unsigned long)db->membase; |
| 843 | ndev->irq = irq_of_parse_and_map(np, 0); |
| 844 | if (ndev->irq == -ENXIO) { |
| 845 | netdev_err(ndev, "No irq resource\n"); |
| 846 | ret = ndev->irq; |
| 847 | goto out; |
| 848 | } |
| 849 | |
| 850 | db->clk = devm_clk_get(&pdev->dev, NULL); |
| 851 | if (IS_ERR(db->clk)) |
| 852 | goto out; |
| 853 | |
| 854 | clk_prepare_enable(db->clk); |
| 855 | |
| 856 | db->phy_node = of_parse_phandle(np, "phy", 0); |
| 857 | if (!db->phy_node) { |
| 858 | dev_err(&pdev->dev, "no associated PHY\n"); |
| 859 | ret = -ENODEV; |
| 860 | goto out; |
| 861 | } |
| 862 | |
| 863 | /* Read MAC-address from DT */ |
| 864 | mac_addr = of_get_mac_address(np); |
| 865 | if (mac_addr) |
| 866 | memcpy(ndev->dev_addr, mac_addr, ETH_ALEN); |
| 867 | |
| 868 | /* Check if the MAC address is valid, if not get a random one */ |
| 869 | if (!is_valid_ether_addr(ndev->dev_addr)) { |
| 870 | eth_hw_addr_random(ndev); |
| 871 | dev_warn(&pdev->dev, "using random MAC address %pM\n", |
| 872 | ndev->dev_addr); |
| 873 | } |
| 874 | |
| 875 | db->emacrx_completed_flag = 1; |
| 876 | emac_powerup(ndev); |
| 877 | emac_reset(db); |
| 878 | |
| 879 | ether_setup(ndev); |
| 880 | |
| 881 | ndev->netdev_ops = &emac_netdev_ops; |
| 882 | ndev->watchdog_timeo = msecs_to_jiffies(watchdog); |
| 883 | ndev->ethtool_ops = &emac_ethtool_ops; |
| 884 | |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 885 | platform_set_drvdata(pdev, ndev); |
| 886 | |
| 887 | /* Carrier starts down, phylib will bring it up */ |
| 888 | netif_carrier_off(ndev); |
| 889 | |
| 890 | ret = register_netdev(ndev); |
| 891 | if (ret) { |
| 892 | dev_err(&pdev->dev, "Registering netdev failed!\n"); |
| 893 | ret = -ENODEV; |
| 894 | goto out; |
| 895 | } |
| 896 | |
| 897 | dev_info(&pdev->dev, "%s: at %p, IRQ %d MAC: %pM\n", |
| 898 | ndev->name, db->membase, ndev->irq, ndev->dev_addr); |
| 899 | |
| 900 | return 0; |
| 901 | |
| 902 | out: |
| 903 | dev_err(db->dev, "not found (%d).\n", ret); |
| 904 | |
| 905 | free_netdev(ndev); |
| 906 | |
| 907 | return ret; |
| 908 | } |
| 909 | |
| 910 | static int emac_remove(struct platform_device *pdev) |
| 911 | { |
| 912 | struct net_device *ndev = platform_get_drvdata(pdev); |
| 913 | |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 914 | unregister_netdev(ndev); |
| 915 | free_netdev(ndev); |
| 916 | |
| 917 | dev_dbg(&pdev->dev, "released and freed device\n"); |
| 918 | return 0; |
| 919 | } |
| 920 | |
| 921 | static int emac_suspend(struct platform_device *dev, pm_message_t state) |
| 922 | { |
| 923 | struct net_device *ndev = platform_get_drvdata(dev); |
| 924 | |
| 925 | netif_carrier_off(ndev); |
| 926 | netif_device_detach(ndev); |
| 927 | emac_shutdown(ndev); |
| 928 | |
| 929 | return 0; |
| 930 | } |
| 931 | |
| 932 | static int emac_resume(struct platform_device *dev) |
| 933 | { |
| 934 | struct net_device *ndev = platform_get_drvdata(dev); |
| 935 | struct emac_board_info *db = netdev_priv(ndev); |
| 936 | |
| 937 | emac_reset(db); |
| 938 | emac_init_device(ndev); |
| 939 | netif_device_attach(ndev); |
| 940 | |
| 941 | return 0; |
| 942 | } |
| 943 | |
| 944 | static const struct of_device_id emac_of_match[] = { |
Maxime Ripard | 4dae168 | 2014-02-02 14:49:11 +0100 | [diff] [blame] | 945 | {.compatible = "allwinner,sun4i-a10-emac",}, |
| 946 | |
| 947 | /* Deprecated */ |
Stefan Roese | 4922050 | 2013-05-30 03:49:20 +0000 | [diff] [blame] | 948 | {.compatible = "allwinner,sun4i-emac",}, |
| 949 | {}, |
| 950 | }; |
| 951 | |
| 952 | MODULE_DEVICE_TABLE(of, emac_of_match); |
| 953 | |
| 954 | static struct platform_driver emac_driver = { |
| 955 | .driver = { |
| 956 | .name = "sun4i-emac", |
| 957 | .of_match_table = emac_of_match, |
| 958 | }, |
| 959 | .probe = emac_probe, |
| 960 | .remove = emac_remove, |
| 961 | .suspend = emac_suspend, |
| 962 | .resume = emac_resume, |
| 963 | }; |
| 964 | |
| 965 | module_platform_driver(emac_driver); |
| 966 | |
| 967 | MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); |
| 968 | MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); |
| 969 | MODULE_DESCRIPTION("Allwinner A10 emac network driver"); |
| 970 | MODULE_LICENSE("GPL"); |