Jisheng Zhang | 97be8288 | 2020-03-16 22:30:20 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // |
Jisheng Zhang | 751ca3a | 2020-03-16 22:31:27 +0800 | [diff] [blame] | 3 | // MP8867/MP8869 regulator driver |
Jisheng Zhang | 97be8288 | 2020-03-16 22:30:20 +0800 | [diff] [blame] | 4 | // |
| 5 | // Copyright (C) 2020 Synaptics Incorporated |
| 6 | // |
| 7 | // Author: Jisheng Zhang <jszhang@kernel.org> |
| 8 | |
| 9 | #include <linux/gpio/consumer.h> |
| 10 | #include <linux/i2c.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/of_device.h> |
| 13 | #include <linux/regmap.h> |
| 14 | #include <linux/regulator/driver.h> |
| 15 | #include <linux/regulator/of_regulator.h> |
| 16 | |
| 17 | #define MP886X_VSEL 0x00 |
| 18 | #define MP886X_V_BOOT (1 << 7) |
| 19 | #define MP886X_SYSCNTLREG1 0x01 |
| 20 | #define MP886X_MODE (1 << 0) |
| 21 | #define MP886X_GO (1 << 6) |
| 22 | #define MP886X_EN (1 << 7) |
| 23 | |
| 24 | struct mp886x_device_info { |
| 25 | struct device *dev; |
| 26 | struct regulator_desc desc; |
| 27 | struct regulator_init_data *regulator; |
| 28 | struct gpio_desc *en_gpio; |
| 29 | u32 r[2]; |
| 30 | unsigned int sel; |
| 31 | }; |
| 32 | |
| 33 | static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| 34 | { |
| 35 | switch (mode) { |
| 36 | case REGULATOR_MODE_FAST: |
| 37 | regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| 38 | MP886X_MODE, MP886X_MODE); |
| 39 | break; |
| 40 | case REGULATOR_MODE_NORMAL: |
| 41 | regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| 42 | MP886X_MODE, 0); |
| 43 | break; |
| 44 | default: |
| 45 | return -EINVAL; |
| 46 | } |
| 47 | return 0; |
| 48 | } |
| 49 | |
| 50 | static unsigned int mp886x_get_mode(struct regulator_dev *rdev) |
| 51 | { |
| 52 | u32 val; |
| 53 | int ret; |
| 54 | |
| 55 | ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val); |
| 56 | if (ret < 0) |
| 57 | return ret; |
| 58 | if (val & MP886X_MODE) |
| 59 | return REGULATOR_MODE_FAST; |
| 60 | else |
| 61 | return REGULATOR_MODE_NORMAL; |
| 62 | } |
| 63 | |
| 64 | static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) |
| 65 | { |
| 66 | int ret; |
| 67 | |
| 68 | ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| 69 | MP886X_GO, MP886X_GO); |
| 70 | if (ret < 0) |
| 71 | return ret; |
| 72 | |
| 73 | sel <<= ffs(rdev->desc->vsel_mask) - 1; |
| 74 | return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, |
| 75 | MP886X_V_BOOT | rdev->desc->vsel_mask, sel); |
| 76 | } |
| 77 | |
| 78 | static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2) |
| 79 | { |
| 80 | u32 tmp = uv * r1 / r2; |
| 81 | |
| 82 | return uv + tmp; |
| 83 | } |
| 84 | |
| 85 | static int mp8869_get_voltage_sel(struct regulator_dev *rdev) |
| 86 | { |
| 87 | struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| 88 | int ret, uv; |
| 89 | unsigned int val; |
| 90 | bool fbloop; |
| 91 | |
| 92 | ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); |
| 93 | if (ret) |
| 94 | return ret; |
| 95 | |
| 96 | fbloop = val & MP886X_V_BOOT; |
| 97 | if (fbloop) { |
| 98 | uv = rdev->desc->min_uV; |
| 99 | uv = mp8869_scale(uv, di->r[0], di->r[1]); |
| 100 | return regulator_map_voltage_linear(rdev, uv, uv); |
| 101 | } |
| 102 | |
| 103 | val &= rdev->desc->vsel_mask; |
| 104 | val >>= ffs(rdev->desc->vsel_mask) - 1; |
| 105 | |
| 106 | return val; |
| 107 | } |
| 108 | |
| 109 | static const struct regulator_ops mp8869_regulator_ops = { |
| 110 | .set_voltage_sel = mp8869_set_voltage_sel, |
| 111 | .get_voltage_sel = mp8869_get_voltage_sel, |
| 112 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 113 | .map_voltage = regulator_map_voltage_linear, |
| 114 | .list_voltage = regulator_list_voltage_linear, |
| 115 | .enable = regulator_enable_regmap, |
| 116 | .disable = regulator_disable_regmap, |
| 117 | .is_enabled = regulator_is_enabled_regmap, |
| 118 | .set_mode = mp886x_set_mode, |
| 119 | .get_mode = mp886x_get_mode, |
| 120 | }; |
| 121 | |
Jisheng Zhang | 751ca3a | 2020-03-16 22:31:27 +0800 | [diff] [blame] | 122 | static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) |
| 123 | { |
| 124 | struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| 125 | int ret, delta; |
| 126 | |
| 127 | ret = mp8869_set_voltage_sel(rdev, sel); |
| 128 | if (ret < 0) |
| 129 | return ret; |
| 130 | |
| 131 | delta = di->sel - sel; |
| 132 | if (abs(delta) <= 5) |
| 133 | ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| 134 | MP886X_GO, 0); |
| 135 | di->sel = sel; |
| 136 | |
| 137 | return ret; |
| 138 | } |
| 139 | |
| 140 | static int mp8867_get_voltage_sel(struct regulator_dev *rdev) |
| 141 | { |
| 142 | struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| 143 | int ret, uv; |
| 144 | unsigned int val; |
| 145 | bool fbloop; |
| 146 | |
| 147 | ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); |
| 148 | if (ret) |
| 149 | return ret; |
| 150 | |
| 151 | fbloop = val & MP886X_V_BOOT; |
| 152 | |
| 153 | val &= rdev->desc->vsel_mask; |
| 154 | val >>= ffs(rdev->desc->vsel_mask) - 1; |
| 155 | |
| 156 | if (fbloop) { |
| 157 | uv = regulator_list_voltage_linear(rdev, val); |
| 158 | uv = mp8869_scale(uv, di->r[0], di->r[1]); |
| 159 | return regulator_map_voltage_linear(rdev, uv, uv); |
| 160 | } |
| 161 | |
| 162 | return val; |
| 163 | } |
| 164 | |
| 165 | static const struct regulator_ops mp8867_regulator_ops = { |
| 166 | .set_voltage_sel = mp8867_set_voltage_sel, |
| 167 | .get_voltage_sel = mp8867_get_voltage_sel, |
| 168 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 169 | .map_voltage = regulator_map_voltage_linear, |
| 170 | .list_voltage = regulator_list_voltage_linear, |
| 171 | .enable = regulator_enable_regmap, |
| 172 | .disable = regulator_disable_regmap, |
| 173 | .is_enabled = regulator_is_enabled_regmap, |
| 174 | .set_mode = mp886x_set_mode, |
| 175 | .get_mode = mp886x_get_mode, |
| 176 | }; |
| 177 | |
Jisheng Zhang | 97be8288 | 2020-03-16 22:30:20 +0800 | [diff] [blame] | 178 | static int mp886x_regulator_register(struct mp886x_device_info *di, |
| 179 | struct regulator_config *config) |
| 180 | { |
| 181 | struct regulator_desc *rdesc = &di->desc; |
| 182 | struct regulator_dev *rdev; |
| 183 | |
| 184 | rdesc->name = "mp886x-reg"; |
| 185 | rdesc->supply_name = "vin"; |
| 186 | rdesc->ops = of_device_get_match_data(di->dev); |
| 187 | rdesc->type = REGULATOR_VOLTAGE; |
| 188 | rdesc->n_voltages = 128; |
| 189 | rdesc->enable_reg = MP886X_SYSCNTLREG1; |
| 190 | rdesc->enable_mask = MP886X_EN; |
| 191 | rdesc->min_uV = 600000; |
| 192 | rdesc->uV_step = 10000; |
| 193 | rdesc->vsel_reg = MP886X_VSEL; |
| 194 | rdesc->vsel_mask = 0x3f; |
| 195 | rdesc->owner = THIS_MODULE; |
| 196 | |
| 197 | rdev = devm_regulator_register(di->dev, &di->desc, config); |
| 198 | if (IS_ERR(rdev)) |
| 199 | return PTR_ERR(rdev); |
| 200 | di->sel = rdesc->ops->get_voltage_sel(rdev); |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | static const struct regmap_config mp886x_regmap_config = { |
| 205 | .reg_bits = 8, |
| 206 | .val_bits = 8, |
| 207 | }; |
| 208 | |
| 209 | static int mp886x_i2c_probe(struct i2c_client *client, |
| 210 | const struct i2c_device_id *id) |
| 211 | { |
| 212 | struct device *dev = &client->dev; |
| 213 | struct device_node *np = dev->of_node; |
| 214 | struct mp886x_device_info *di; |
| 215 | struct regulator_config config = { }; |
| 216 | struct regmap *regmap; |
| 217 | int ret; |
| 218 | |
| 219 | di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL); |
| 220 | if (!di) |
| 221 | return -ENOMEM; |
| 222 | |
| 223 | di->regulator = of_get_regulator_init_data(dev, np, &di->desc); |
| 224 | if (!di->regulator) { |
| 225 | dev_err(dev, "Platform data not found!\n"); |
| 226 | return -EINVAL; |
| 227 | } |
| 228 | |
| 229 | ret = of_property_read_u32_array(np, "mps,fb-voltage-divider", |
| 230 | di->r, 2); |
| 231 | if (ret) |
| 232 | return ret; |
| 233 | |
| 234 | di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); |
| 235 | if (IS_ERR(di->en_gpio)) |
| 236 | return PTR_ERR(di->en_gpio); |
| 237 | |
| 238 | di->dev = dev; |
| 239 | |
| 240 | regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config); |
| 241 | if (IS_ERR(regmap)) { |
| 242 | dev_err(dev, "Failed to allocate regmap!\n"); |
| 243 | return PTR_ERR(regmap); |
| 244 | } |
| 245 | i2c_set_clientdata(client, di); |
| 246 | |
| 247 | config.dev = di->dev; |
| 248 | config.init_data = di->regulator; |
| 249 | config.regmap = regmap; |
| 250 | config.driver_data = di; |
| 251 | config.of_node = np; |
| 252 | |
| 253 | ret = mp886x_regulator_register(di, &config); |
| 254 | if (ret < 0) |
| 255 | dev_err(dev, "Failed to register regulator!\n"); |
| 256 | return ret; |
| 257 | } |
| 258 | |
| 259 | static const struct of_device_id mp886x_dt_ids[] = { |
| 260 | { |
Jisheng Zhang | 751ca3a | 2020-03-16 22:31:27 +0800 | [diff] [blame] | 261 | .compatible = "mps,mp8867", |
| 262 | .data = &mp8867_regulator_ops |
| 263 | }, |
| 264 | { |
Jisheng Zhang | 97be8288 | 2020-03-16 22:30:20 +0800 | [diff] [blame] | 265 | .compatible = "mps,mp8869", |
| 266 | .data = &mp8869_regulator_ops |
| 267 | }, |
| 268 | { } |
| 269 | }; |
| 270 | MODULE_DEVICE_TABLE(of, mp886x_dt_ids); |
| 271 | |
| 272 | static const struct i2c_device_id mp886x_id[] = { |
| 273 | { "mp886x", }, |
| 274 | { }, |
| 275 | }; |
| 276 | MODULE_DEVICE_TABLE(i2c, mp886x_id); |
| 277 | |
| 278 | static struct i2c_driver mp886x_regulator_driver = { |
| 279 | .driver = { |
| 280 | .name = "mp886x-regulator", |
| 281 | .of_match_table = of_match_ptr(mp886x_dt_ids), |
| 282 | }, |
| 283 | .probe = mp886x_i2c_probe, |
| 284 | .id_table = mp886x_id, |
| 285 | }; |
| 286 | module_i2c_driver(mp886x_regulator_driver); |
| 287 | |
| 288 | MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); |
| 289 | MODULE_DESCRIPTION("MP886x regulator driver"); |
| 290 | MODULE_LICENSE("GPL v2"); |