Kunihiko Hayashi | ca74472 | 2018-12-07 10:06:04 +0900 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Kunihiko Hayashi | 86da439 | 2017-08-01 17:04:51 +0900 | [diff] [blame] | 2 | /** |
| 3 | * uniphier_thermal.c - Socionext UniPhier thermal driver |
Kunihiko Hayashi | 86da439 | 2017-08-01 17:04:51 +0900 | [diff] [blame] | 4 | * Copyright 2014 Panasonic Corporation |
| 5 | * Copyright 2016-2017 Socionext Inc. |
Kunihiko Hayashi | 86da439 | 2017-08-01 17:04:51 +0900 | [diff] [blame] | 6 | * Author: |
| 7 | * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
Kunihiko Hayashi | 86da439 | 2017-08-01 17:04:51 +0900 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | #include <linux/bitops.h> |
| 11 | #include <linux/interrupt.h> |
| 12 | #include <linux/mfd/syscon.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/of.h> |
| 15 | #include <linux/of_device.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/regmap.h> |
| 18 | #include <linux/thermal.h> |
| 19 | |
| 20 | #include "thermal_core.h" |
| 21 | |
| 22 | /* |
| 23 | * block registers |
| 24 | * addresses are the offset from .block_base |
| 25 | */ |
| 26 | #define PVTCTLEN 0x0000 |
| 27 | #define PVTCTLEN_EN BIT(0) |
| 28 | |
| 29 | #define PVTCTLMODE 0x0004 |
| 30 | #define PVTCTLMODE_MASK 0xf |
| 31 | #define PVTCTLMODE_TEMPMON 0x5 |
| 32 | |
| 33 | #define EMONREPEAT 0x0040 |
| 34 | #define EMONREPEAT_ENDLESS BIT(24) |
| 35 | #define EMONREPEAT_PERIOD GENMASK(3, 0) |
| 36 | #define EMONREPEAT_PERIOD_1000000 0x9 |
| 37 | |
| 38 | /* |
| 39 | * common registers |
| 40 | * addresses are the offset from .map_base |
| 41 | */ |
| 42 | #define PVTCTLSEL 0x0900 |
| 43 | #define PVTCTLSEL_MASK GENMASK(2, 0) |
| 44 | #define PVTCTLSEL_MONITOR 0 |
| 45 | |
| 46 | #define SETALERT0 0x0910 |
| 47 | #define SETALERT1 0x0914 |
| 48 | #define SETALERT2 0x0918 |
| 49 | #define SETALERT_TEMP_OVF (GENMASK(7, 0) << 16) |
| 50 | #define SETALERT_TEMP_OVF_VALUE(val) (((val) & GENMASK(7, 0)) << 16) |
| 51 | #define SETALERT_EN BIT(0) |
| 52 | |
| 53 | #define PMALERTINTCTL 0x0920 |
| 54 | #define PMALERTINTCTL_CLR(ch) BIT(4 * (ch) + 2) |
| 55 | #define PMALERTINTCTL_SET(ch) BIT(4 * (ch) + 1) |
| 56 | #define PMALERTINTCTL_EN(ch) BIT(4 * (ch) + 0) |
| 57 | #define PMALERTINTCTL_MASK (GENMASK(10, 8) | GENMASK(6, 4) | \ |
| 58 | GENMASK(2, 0)) |
| 59 | |
| 60 | #define TMOD 0x0928 |
| 61 | #define TMOD_WIDTH 9 |
| 62 | |
| 63 | #define TMODCOEF 0x0e5c |
| 64 | |
| 65 | #define TMODSETUP0_EN BIT(30) |
| 66 | #define TMODSETUP0_VAL(val) (((val) & GENMASK(13, 0)) << 16) |
| 67 | #define TMODSETUP1_EN BIT(15) |
| 68 | #define TMODSETUP1_VAL(val) ((val) & GENMASK(14, 0)) |
| 69 | |
| 70 | /* SoC critical temperature */ |
| 71 | #define CRITICAL_TEMP_LIMIT (120 * 1000) |
| 72 | |
| 73 | /* Max # of alert channels */ |
| 74 | #define ALERT_CH_NUM 3 |
| 75 | |
| 76 | /* SoC specific thermal sensor data */ |
| 77 | struct uniphier_tm_soc_data { |
| 78 | u32 map_base; |
| 79 | u32 block_base; |
| 80 | u32 tmod_setup_addr; |
| 81 | }; |
| 82 | |
| 83 | struct uniphier_tm_dev { |
| 84 | struct regmap *regmap; |
| 85 | struct device *dev; |
| 86 | bool alert_en[ALERT_CH_NUM]; |
| 87 | struct thermal_zone_device *tz_dev; |
| 88 | const struct uniphier_tm_soc_data *data; |
| 89 | }; |
| 90 | |
| 91 | static int uniphier_tm_initialize_sensor(struct uniphier_tm_dev *tdev) |
| 92 | { |
| 93 | struct regmap *map = tdev->regmap; |
| 94 | u32 val; |
| 95 | u32 tmod_calib[2]; |
| 96 | int ret; |
| 97 | |
| 98 | /* stop PVT */ |
| 99 | regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, |
| 100 | PVTCTLEN_EN, 0); |
| 101 | |
| 102 | /* |
| 103 | * Since SoC has a calibrated value that was set in advance, |
| 104 | * TMODCOEF shows non-zero and PVT refers the value internally. |
| 105 | * |
| 106 | * If TMODCOEF shows zero, the boards don't have the calibrated |
| 107 | * value, and the driver has to set default value from DT. |
| 108 | */ |
| 109 | ret = regmap_read(map, tdev->data->map_base + TMODCOEF, &val); |
| 110 | if (ret) |
| 111 | return ret; |
| 112 | if (!val) { |
| 113 | /* look for the default values in DT */ |
| 114 | ret = of_property_read_u32_array(tdev->dev->of_node, |
| 115 | "socionext,tmod-calibration", |
| 116 | tmod_calib, |
| 117 | ARRAY_SIZE(tmod_calib)); |
| 118 | if (ret) |
| 119 | return ret; |
| 120 | |
| 121 | regmap_write(map, tdev->data->tmod_setup_addr, |
| 122 | TMODSETUP0_EN | TMODSETUP0_VAL(tmod_calib[0]) | |
| 123 | TMODSETUP1_EN | TMODSETUP1_VAL(tmod_calib[1])); |
| 124 | } |
| 125 | |
| 126 | /* select temperature mode */ |
| 127 | regmap_write_bits(map, tdev->data->block_base + PVTCTLMODE, |
| 128 | PVTCTLMODE_MASK, PVTCTLMODE_TEMPMON); |
| 129 | |
| 130 | /* set monitoring period */ |
| 131 | regmap_write_bits(map, tdev->data->block_base + EMONREPEAT, |
| 132 | EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD, |
| 133 | EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD_1000000); |
| 134 | |
| 135 | /* set monitor mode */ |
| 136 | regmap_write_bits(map, tdev->data->map_base + PVTCTLSEL, |
| 137 | PVTCTLSEL_MASK, PVTCTLSEL_MONITOR); |
| 138 | |
| 139 | return 0; |
| 140 | } |
| 141 | |
| 142 | static void uniphier_tm_set_alert(struct uniphier_tm_dev *tdev, u32 ch, |
| 143 | u32 temp) |
| 144 | { |
| 145 | struct regmap *map = tdev->regmap; |
| 146 | |
| 147 | /* set alert temperature */ |
| 148 | regmap_write_bits(map, tdev->data->map_base + SETALERT0 + (ch << 2), |
| 149 | SETALERT_EN | SETALERT_TEMP_OVF, |
| 150 | SETALERT_EN | |
| 151 | SETALERT_TEMP_OVF_VALUE(temp / 1000)); |
| 152 | } |
| 153 | |
| 154 | static void uniphier_tm_enable_sensor(struct uniphier_tm_dev *tdev) |
| 155 | { |
| 156 | struct regmap *map = tdev->regmap; |
| 157 | int i; |
| 158 | u32 bits = 0; |
| 159 | |
| 160 | for (i = 0; i < ALERT_CH_NUM; i++) |
| 161 | if (tdev->alert_en[i]) |
| 162 | bits |= PMALERTINTCTL_EN(i); |
| 163 | |
| 164 | /* enable alert interrupt */ |
| 165 | regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL, |
| 166 | PMALERTINTCTL_MASK, bits); |
| 167 | |
| 168 | /* start PVT */ |
| 169 | regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, |
| 170 | PVTCTLEN_EN, PVTCTLEN_EN); |
| 171 | |
| 172 | usleep_range(700, 1500); /* The spec note says at least 700us */ |
| 173 | } |
| 174 | |
| 175 | static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev) |
| 176 | { |
| 177 | struct regmap *map = tdev->regmap; |
| 178 | |
| 179 | /* disable alert interrupt */ |
| 180 | regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL, |
| 181 | PMALERTINTCTL_MASK, 0); |
| 182 | |
| 183 | /* stop PVT */ |
| 184 | regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, |
| 185 | PVTCTLEN_EN, 0); |
| 186 | |
| 187 | usleep_range(1000, 2000); /* The spec note says at least 1ms */ |
| 188 | } |
| 189 | |
| 190 | static int uniphier_tm_get_temp(void *data, int *out_temp) |
| 191 | { |
| 192 | struct uniphier_tm_dev *tdev = data; |
| 193 | struct regmap *map = tdev->regmap; |
| 194 | int ret; |
| 195 | u32 temp; |
| 196 | |
| 197 | ret = regmap_read(map, tdev->data->map_base + TMOD, &temp); |
| 198 | if (ret) |
| 199 | return ret; |
| 200 | |
| 201 | /* MSB of the TMOD field is a sign bit */ |
| 202 | *out_temp = sign_extend32(temp, TMOD_WIDTH - 1) * 1000; |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops = { |
| 208 | .get_temp = uniphier_tm_get_temp, |
| 209 | }; |
| 210 | |
| 211 | static void uniphier_tm_irq_clear(struct uniphier_tm_dev *tdev) |
| 212 | { |
| 213 | u32 mask = 0, bits = 0; |
| 214 | int i; |
| 215 | |
| 216 | for (i = 0; i < ALERT_CH_NUM; i++) { |
| 217 | mask |= (PMALERTINTCTL_CLR(i) | PMALERTINTCTL_SET(i)); |
| 218 | bits |= PMALERTINTCTL_CLR(i); |
| 219 | } |
| 220 | |
| 221 | /* clear alert interrupt */ |
| 222 | regmap_write_bits(tdev->regmap, |
| 223 | tdev->data->map_base + PMALERTINTCTL, mask, bits); |
| 224 | } |
| 225 | |
| 226 | static irqreturn_t uniphier_tm_alarm_irq(int irq, void *_tdev) |
| 227 | { |
| 228 | struct uniphier_tm_dev *tdev = _tdev; |
| 229 | |
| 230 | disable_irq_nosync(irq); |
| 231 | uniphier_tm_irq_clear(tdev); |
| 232 | |
| 233 | return IRQ_WAKE_THREAD; |
| 234 | } |
| 235 | |
| 236 | static irqreturn_t uniphier_tm_alarm_irq_thread(int irq, void *_tdev) |
| 237 | { |
| 238 | struct uniphier_tm_dev *tdev = _tdev; |
| 239 | |
| 240 | thermal_zone_device_update(tdev->tz_dev, THERMAL_EVENT_UNSPECIFIED); |
| 241 | |
| 242 | return IRQ_HANDLED; |
| 243 | } |
| 244 | |
| 245 | static int uniphier_tm_probe(struct platform_device *pdev) |
| 246 | { |
| 247 | struct device *dev = &pdev->dev; |
| 248 | struct regmap *regmap; |
| 249 | struct device_node *parent; |
| 250 | struct uniphier_tm_dev *tdev; |
| 251 | const struct thermal_trip *trips; |
| 252 | int i, ret, irq, ntrips, crit_temp = INT_MAX; |
| 253 | |
| 254 | tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL); |
| 255 | if (!tdev) |
| 256 | return -ENOMEM; |
| 257 | tdev->dev = dev; |
| 258 | |
| 259 | tdev->data = of_device_get_match_data(dev); |
| 260 | if (WARN_ON(!tdev->data)) |
| 261 | return -EINVAL; |
| 262 | |
| 263 | irq = platform_get_irq(pdev, 0); |
| 264 | if (irq < 0) |
| 265 | return irq; |
| 266 | |
| 267 | /* get regmap from syscon node */ |
| 268 | parent = of_get_parent(dev->of_node); /* parent should be syscon node */ |
| 269 | regmap = syscon_node_to_regmap(parent); |
| 270 | of_node_put(parent); |
| 271 | if (IS_ERR(regmap)) { |
| 272 | dev_err(dev, "failed to get regmap (error %ld)\n", |
| 273 | PTR_ERR(regmap)); |
| 274 | return PTR_ERR(regmap); |
| 275 | } |
| 276 | tdev->regmap = regmap; |
| 277 | |
| 278 | ret = uniphier_tm_initialize_sensor(tdev); |
| 279 | if (ret) { |
| 280 | dev_err(dev, "failed to initialize sensor\n"); |
| 281 | return ret; |
| 282 | } |
| 283 | |
| 284 | ret = devm_request_threaded_irq(dev, irq, uniphier_tm_alarm_irq, |
| 285 | uniphier_tm_alarm_irq_thread, |
| 286 | 0, "thermal", tdev); |
| 287 | if (ret) |
| 288 | return ret; |
| 289 | |
| 290 | platform_set_drvdata(pdev, tdev); |
| 291 | |
| 292 | tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev, |
| 293 | &uniphier_of_thermal_ops); |
| 294 | if (IS_ERR(tdev->tz_dev)) { |
| 295 | dev_err(dev, "failed to register sensor device\n"); |
| 296 | return PTR_ERR(tdev->tz_dev); |
| 297 | } |
| 298 | |
| 299 | /* get trip points */ |
| 300 | trips = of_thermal_get_trip_points(tdev->tz_dev); |
| 301 | ntrips = of_thermal_get_ntrips(tdev->tz_dev); |
| 302 | if (ntrips > ALERT_CH_NUM) { |
| 303 | dev_err(dev, "thermal zone has too many trips\n"); |
| 304 | return -E2BIG; |
| 305 | } |
| 306 | |
| 307 | /* set alert temperatures */ |
| 308 | for (i = 0; i < ntrips; i++) { |
| 309 | if (trips[i].type == THERMAL_TRIP_CRITICAL && |
| 310 | trips[i].temperature < crit_temp) |
| 311 | crit_temp = trips[i].temperature; |
| 312 | uniphier_tm_set_alert(tdev, i, trips[i].temperature); |
| 313 | tdev->alert_en[i] = true; |
| 314 | } |
| 315 | if (crit_temp > CRITICAL_TEMP_LIMIT) { |
| 316 | dev_err(dev, "critical trip is over limit(>%d), or not set\n", |
| 317 | CRITICAL_TEMP_LIMIT); |
| 318 | return -EINVAL; |
| 319 | } |
| 320 | |
| 321 | uniphier_tm_enable_sensor(tdev); |
| 322 | |
| 323 | return 0; |
| 324 | } |
| 325 | |
| 326 | static int uniphier_tm_remove(struct platform_device *pdev) |
| 327 | { |
| 328 | struct uniphier_tm_dev *tdev = platform_get_drvdata(pdev); |
| 329 | |
| 330 | /* disable sensor */ |
| 331 | uniphier_tm_disable_sensor(tdev); |
| 332 | |
| 333 | return 0; |
| 334 | } |
| 335 | |
| 336 | static const struct uniphier_tm_soc_data uniphier_pxs2_tm_data = { |
| 337 | .map_base = 0xe000, |
| 338 | .block_base = 0xe000, |
| 339 | .tmod_setup_addr = 0xe904, |
| 340 | }; |
| 341 | |
| 342 | static const struct uniphier_tm_soc_data uniphier_ld20_tm_data = { |
| 343 | .map_base = 0xe000, |
| 344 | .block_base = 0xe800, |
| 345 | .tmod_setup_addr = 0xe938, |
| 346 | }; |
| 347 | |
| 348 | static const struct of_device_id uniphier_tm_dt_ids[] = { |
| 349 | { |
| 350 | .compatible = "socionext,uniphier-pxs2-thermal", |
| 351 | .data = &uniphier_pxs2_tm_data, |
| 352 | }, |
| 353 | { |
| 354 | .compatible = "socionext,uniphier-ld20-thermal", |
| 355 | .data = &uniphier_ld20_tm_data, |
| 356 | }, |
Kunihiko Hayashi | 2d3c4cf | 2018-03-30 12:51:20 +0900 | [diff] [blame] | 357 | { |
| 358 | .compatible = "socionext,uniphier-pxs3-thermal", |
| 359 | .data = &uniphier_ld20_tm_data, |
| 360 | }, |
Kunihiko Hayashi | 86da439 | 2017-08-01 17:04:51 +0900 | [diff] [blame] | 361 | { /* sentinel */ } |
| 362 | }; |
| 363 | MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids); |
| 364 | |
| 365 | static struct platform_driver uniphier_tm_driver = { |
| 366 | .probe = uniphier_tm_probe, |
| 367 | .remove = uniphier_tm_remove, |
| 368 | .driver = { |
| 369 | .name = "uniphier-thermal", |
| 370 | .of_match_table = uniphier_tm_dt_ids, |
| 371 | }, |
| 372 | }; |
| 373 | module_platform_driver(uniphier_tm_driver); |
| 374 | |
| 375 | MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); |
| 376 | MODULE_DESCRIPTION("UniPhier thermal driver"); |
| 377 | MODULE_LICENSE("GPL v2"); |