arch/arm64/boot/dts/amlogic/meson-gx.dtsi

/*
 * Copyright (c) 2016 Andreas Färber
 *
 * Copyright (c) 2016 BayLibre, SAS.
 * Author: Neil Armstrong <narmstrong@baylibre.com>
 *
 * Copyright (c) 2016 Endless Computers, Inc.
 * Author: Carlo Caione <carlo@endlessm.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <0x2>;
		#size-cells = <0x0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x0>;
			enable-method = "psci";
			next-level-cache = <&l2>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x1>;
			enable-method = "psci";
			next-level-cache = <&l2>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x2>;
			enable-method = "psci";
			next-level-cache = <&l2>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53", "arm,armv8";
			reg = <0x0 0x3>;
			enable-method = "psci";
			next-level-cache = <&l2>;
		};

		l2: l2-cache0 {
			compatible = "cache";
		};
	};

	arm-pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10
			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
	};

	xtal: xtal-clk {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xtal";
		#clock-cells = <0>;
	};

	firmware {
		sm: secure-monitor {
			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
		};
	};

	efuse: efuse {
		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
		#address-cells = <1>;
		#size-cells = <1>;

		sn: sn@14 {
			reg = <0x14 0x10>;
		};

		eth_mac: eth_mac@34 {
			reg = <0x34 0x10>;
		};

		bid: bid@46 {
			reg = <0x46 0x30>;
		};
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		cbus: cbus@c1100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc1100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;

			reset: reset-controller@4404 {
				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
				reg = <0x0 0x04404 0x0 0x20>;
				#reset-cells = <1>;
			};

			uart_A: serial@84c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84c0 0x0 0x14>;
				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			uart_B: serial@84dc {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x84dc 0x0 0x14>;
				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			i2c_A: i2c@8500 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x08500 0x0 0x20>;
				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			pwm_ab: pwm@8550 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x08550 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm_cd: pwm@8650 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x08650 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm_ef: pwm@86c0 {
				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
				reg = <0x0 0x086c0 0x0 0x10>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			uart_C: serial@8700 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x8700 0x0 0x14>;
				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			i2c_B: i2c@87c0 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x087c0 0x0 0x20>;
				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c_C: i2c@87e0 {
				compatible = "amlogic,meson-gxbb-i2c";
				reg = <0x0 0x087e0 0x0 0x20>;
				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			watchdog@98d0 {
				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
				reg = <0x0 0x098d0 0x0 0x10>;
				clocks = <&xtal>;
			};
		};

		gic: interrupt-controller@c4301000 {
			compatible = "arm,gic-400";
			reg = <0x0 0xc4301000 0 0x1000>,
			      <0x0 0xc4302000 0 0x2000>,
			      <0x0 0xc4304000 0 0x2000>,
			      <0x0 0xc4306000 0 0x2000>;
			interrupt-controller;
			interrupts = <GIC_PPI 9
				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
			#interrupt-cells = <3>;
			#address-cells = <0>;
		};

		aobus: aobus@c8100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;

			uart_AO: serial@4c0 {
				compatible = "amlogic,meson-uart";
				reg = <0x0 0x004c0 0x0 0x14>;
				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
				clocks = <&xtal>;
				status = "disabled";
			};

			ir: ir@580 {
				compatible = "amlogic,meson-gxbb-ir";
				reg = <0x0 0x00580 0x0 0x40>;
				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};
		};

		periphs: periphs@c8834000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8834000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;

			rng {
				compatible = "amlogic,meson-rng";
				reg = <0x0 0x0 0x0 0x4>;
			};
		};


		hiubus: hiubus@c883c000 {
			compatible = "simple-bus";
			reg = <0x0 0xc883c000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;

			mailbox: mailbox@404 {
				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
				reg = <0 0x404 0 0x4c>;
				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
					     <0 209 IRQ_TYPE_EDGE_RISING>,
					     <0 210 IRQ_TYPE_EDGE_RISING>;
				#mbox-cells = <1>;
			};
		};

		ethmac: ethernet@c9410000 {
			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
			reg = <0x0 0xc9410000 0x0 0x10000
			       0x0 0xc8834540 0x0 0x4>;
			interrupts = <0 8 1>;
			interrupt-names = "macirq";
			phy-mode = "rgmii";
			status = "disabled";
		};

		apb: apb@d0000000 {
			compatible = "simple-bus";
			reg = <0x0 0xd0000000 0x0 0x200000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;

			sd_emmc_a: mmc@70000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x70000 0x0 0x2000>;
				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};

			sd_emmc_b: mmc@72000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x72000 0x0 0x2000>;
				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};

			sd_emmc_c: mmc@74000 {
				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
				reg = <0x0 0x74000 0x0 0x2000>;
				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
				status = "disabled";
			};
		};

		vpu: vpu@d0100000 {
			compatible = "amlogic,meson-gx-vpu";
			reg = <0x0 0xd0100000 0x0 0x100000>,
			      <0x0 0xc883c000 0x0 0x1000>,
			      <0x0 0xc8838000 0x0 0x1000>;
			reg-names = "vpu", "hhi", "dmc";
			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
			#address-cells = <1>;
			#size-cells = <0>;

			/* CVBS VDAC output port */
			cvbs_vdac_port: port@0 {
				reg = <0>;
			};
		};
	};
};