drivers/net/wireless/marvell/mwifiex/scan.c

/*
 * Marvell Wireless LAN device driver: scan ioctl and command handling
 *
 * Copyright (C) 2011-2014, Marvell International Ltd.
 *
 * This software file (the "File") is distributed by Marvell International
 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
 * (the "License").  You may use, redistribute and/or modify this File in
 * accordance with the terms and conditions of the License, a copy of which
 * is available by writing to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
 *
 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
 * this warranty disclaimer.
 */

#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "11n.h"
#include "cfg80211.h"

/* The maximum number of channels the firmware can scan per command */
#define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN   14

#define MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD	4

/* Memory needed to store a max sized Channel List TLV for a firmware scan */
#define CHAN_TLV_MAX_SIZE  (sizeof(struct mwifiex_ie_types_header)         \
				+ (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN     \
				*sizeof(struct mwifiex_chan_scan_param_set)))

/* Memory needed to store supported rate */
#define RATE_TLV_MAX_SIZE   (sizeof(struct mwifiex_ie_types_rates_param_set) \
				+ HOSTCMD_SUPPORTED_RATES)

/* Memory needed to store a max number/size WildCard SSID TLV for a firmware
	scan */
#define WILDCARD_SSID_TLV_MAX_SIZE  \
	(MWIFIEX_MAX_SSID_LIST_LENGTH *					\
		(sizeof(struct mwifiex_ie_types_wildcard_ssid_params)	\
			+ IEEE80211_MAX_SSID_LEN))

/* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */
#define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config)        \
				+ sizeof(struct mwifiex_ie_types_num_probes)   \
				+ sizeof(struct mwifiex_ie_types_htcap)       \
				+ CHAN_TLV_MAX_SIZE                 \
				+ RATE_TLV_MAX_SIZE                 \
				+ WILDCARD_SSID_TLV_MAX_SIZE)


union mwifiex_scan_cmd_config_tlv {
	/* Scan configuration (variable length) */
	struct mwifiex_scan_cmd_config config;
	/* Max allocated block */
	u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC];
};

enum cipher_suite {
	CIPHER_SUITE_TKIP,
	CIPHER_SUITE_CCMP,
	CIPHER_SUITE_MAX
};
static u8 mwifiex_wpa_oui[CIPHER_SUITE_MAX][4] = {
	{ 0x00, 0x50, 0xf2, 0x02 },	/* TKIP */
	{ 0x00, 0x50, 0xf2, 0x04 },	/* AES  */
};
static u8 mwifiex_rsn_oui[CIPHER_SUITE_MAX][4] = {
	{ 0x00, 0x0f, 0xac, 0x02 },	/* TKIP */
	{ 0x00, 0x0f, 0xac, 0x04 },	/* AES  */
};

static void
_dbg_security_flags(int log_level, const char *func, const char *desc,
		    struct mwifiex_private *priv,
		    struct mwifiex_bssdescriptor *bss_desc)
{
	_mwifiex_dbg(priv->adapter, log_level,
		     "info: %s: %s:\twpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s\tEncMode=%#x privacy=%#x\n",
		     func, desc,
		     bss_desc->bcn_wpa_ie ?
		     bss_desc->bcn_wpa_ie->vend_hdr.element_id : 0,
		     bss_desc->bcn_rsn_ie ?
		     bss_desc->bcn_rsn_ie->ieee_hdr.element_id : 0,
		     priv->sec_info.wep_enabled ? "e" : "d",
		     priv->sec_info.wpa_enabled ? "e" : "d",
		     priv->sec_info.wpa2_enabled ? "e" : "d",
		     priv->sec_info.encryption_mode,
		     bss_desc->privacy);
}
#define dbg_security_flags(mask, desc, priv, bss_desc) \
	_dbg_security_flags(MWIFIEX_DBG_##mask, desc, __func__, priv, bss_desc)

static bool
has_ieee_hdr(struct ieee_types_generic *ie, u8 key)
{
	return (ie && ie->ieee_hdr.element_id == key);
}

static bool
has_vendor_hdr(struct ieee_types_vendor_specific *ie, u8 key)
{
	return (ie && ie->vend_hdr.element_id == key);
}

/*
 * This function parses a given IE for a given OUI.
 *
 * This is used to parse a WPA/RSN IE to find if it has
 * a given oui in PTK.
 */
static u8
mwifiex_search_oui_in_ie(struct ie_body *iebody, u8 *oui)
{
	u8 count;

	count = iebody->ptk_cnt[0];

	/* There could be multiple OUIs for PTK hence
	   1) Take the length.
	   2) Check all the OUIs for AES.
	   3) If one of them is AES then pass success. */
	while (count) {
		if (!memcmp(iebody->ptk_body, oui, sizeof(iebody->ptk_body)))
			return MWIFIEX_OUI_PRESENT;

		--count;
		if (count)
			iebody = (struct ie_body *) ((u8 *) iebody +
						sizeof(iebody->ptk_body));
	}

	pr_debug("info: %s: OUI is not found in PTK\n", __func__);
	return MWIFIEX_OUI_NOT_PRESENT;
}

/*
 * This function checks if a given OUI is present in a RSN IE.
 *
 * The function first checks if a RSN IE is present or not in the
 * BSS descriptor. It tries to locate the OUI only if such an IE is
 * present.
 */
static u8
mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
{
	u8 *oui;
	struct ie_body *iebody;
	u8 ret = MWIFIEX_OUI_NOT_PRESENT;

	if (has_ieee_hdr(bss_desc->bcn_rsn_ie, WLAN_EID_RSN)) {
		iebody = (struct ie_body *)
			 (((u8 *) bss_desc->bcn_rsn_ie->data) +
			  RSN_GTK_OUI_OFFSET);
		oui = &mwifiex_rsn_oui[cipher][0];
		ret = mwifiex_search_oui_in_ie(iebody, oui);
		if (ret)
			return ret;
	}
	return ret;
}

/*
 * This function checks if a given OUI is present in a WPA IE.
 *
 * The function first checks if a WPA IE is present or not in the
 * BSS descriptor. It tries to locate the OUI only if such an IE is
 * present.
 */
static u8
mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher)
{
	u8 *oui;
	struct ie_body *iebody;
	u8 ret = MWIFIEX_OUI_NOT_PRESENT;

	if (has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC)) {
		iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data;
		oui = &mwifiex_wpa_oui[cipher][0];
		ret = mwifiex_search_oui_in_ie(iebody, oui);
		if (ret)
			return ret;
	}
	return ret;
}

/*
 * This function compares two SSIDs and checks if they match.
 */
s32
mwifiex_ssid_cmp(struct cfg80211_ssid *ssid1, struct cfg80211_ssid *ssid2)
{
	if (!ssid1 || !ssid2 || (ssid1->ssid_len != ssid2->ssid_len))
		return -1;
	return memcmp(ssid1->ssid, ssid2->ssid, ssid1->ssid_len);
}

/*
 * This function checks if wapi is enabled in driver and scanned network is
 * compatible with it.
 */
static bool
mwifiex_is_bss_wapi(struct mwifiex_private *priv,
		    struct mwifiex_bssdescriptor *bss_desc)
{
	if (priv->sec_info.wapi_enabled &&
	    has_ieee_hdr(bss_desc->bcn_wapi_ie, WLAN_EID_BSS_AC_ACCESS_DELAY))
		return true;
	return false;
}

/*
 * This function checks if driver is configured with no security mode and
 * scanned network is compatible with it.
 */
static bool
mwifiex_is_bss_no_sec(struct mwifiex_private *priv,
		      struct mwifiex_bssdescriptor *bss_desc)
{
	if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
	    !priv->sec_info.wpa2_enabled &&
	    !has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC) &&
	    !has_ieee_hdr(bss_desc->bcn_rsn_ie, WLAN_EID_RSN) &&
	    !priv->sec_info.encryption_mode && !bss_desc->privacy) {
		return true;
	}
	return false;
}

/*
 * This function checks if static WEP is enabled in driver and scanned network
 * is compatible with it.
 */
static bool
mwifiex_is_bss_static_wep(struct mwifiex_private *priv,
			  struct mwifiex_bssdescriptor *bss_desc)
{
	if (priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
	    !priv->sec_info.wpa2_enabled && bss_desc->privacy) {
		return true;
	}
	return false;
}

/*
 * This function checks if wpa is enabled in driver and scanned network is
 * compatible with it.
 */
static bool
mwifiex_is_bss_wpa(struct mwifiex_private *priv,
		   struct mwifiex_bssdescriptor *bss_desc)
{
	if (!priv->sec_info.wep_enabled && priv->sec_info.wpa_enabled &&
	    !priv->sec_info.wpa2_enabled &&
	    has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC)
	   /*
	    * Privacy bit may NOT be set in some APs like
	    * LinkSys WRT54G && bss_desc->privacy
	    */
	 ) {
		dbg_security_flags(INFO, "WPA", priv, bss_desc);
		return true;
	}
	return false;
}

/*
 * This function checks if wpa2 is enabled in driver and scanned network is
 * compatible with it.
 */
static bool
mwifiex_is_bss_wpa2(struct mwifiex_private *priv,
		    struct mwifiex_bssdescriptor *bss_desc)
{
	if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
	    priv->sec_info.wpa2_enabled &&
	    has_ieee_hdr(bss_desc->bcn_rsn_ie, WLAN_EID_RSN)) {
		/*
		 * Privacy bit may NOT be set in some APs like
		 * LinkSys WRT54G && bss_desc->privacy
		 */
		dbg_security_flags(INFO, "WAP2", priv, bss_desc);
		return true;
	}
	return false;
}

/*
 * This function checks if adhoc AES is enabled in driver and scanned network is
 * compatible with it.
 */
static bool
mwifiex_is_bss_adhoc_aes(struct mwifiex_private *priv,
			 struct mwifiex_bssdescriptor *bss_desc)
{
	if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
	    !priv->sec_info.wpa2_enabled &&
	    !has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC) &&
	    !has_ieee_hdr(bss_desc->bcn_rsn_ie, WLAN_EID_RSN) &&
	    !priv->sec_info.encryption_mode && bss_desc->privacy) {
		return true;
	}
	return false;
}

/*
 * This function checks if dynamic WEP is enabled in driver and scanned network
 * is compatible with it.
 */
static bool
mwifiex_is_bss_dynamic_wep(struct mwifiex_private *priv,
			   struct mwifiex_bssdescriptor *bss_desc)
{
	if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled &&
	    !priv->sec_info.wpa2_enabled &&
	    !has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC) &&
	    !has_ieee_hdr(bss_desc->bcn_rsn_ie, WLAN_EID_RSN) &&
	    priv->sec_info.encryption_mode && bss_desc->privacy) {
		dbg_security_flags(INFO, "dynamic", priv, bss_desc);
		return true;
	}
	return false;
}

/*
 * This function checks if a scanned network is compatible with the driver
 * settings.
 *
 *   WEP     WPA    WPA2   ad-hoc encrypt                  Network
 * enabled enabled enabled  AES    mode   Privacy WPA WPA2 Compatible
 *    0       0       0      0     NONE      0     0   0   yes No security
 *    0       1       0      0      x        1x    1   x   yes WPA (disable
 *                                                         HT if no AES)
 *    0       0       1      0      x        1x    x   1   yes WPA2 (disable
 *                                                         HT if no AES)
 *    0       0       0      1     NONE      1     0   0   yes Ad-hoc AES
 *    1       0       0      0     NONE      1     0   0   yes Static WEP
 *                                                         (disable HT)
 *    0       0       0      0    !=NONE     1     0   0   yes Dynamic WEP
 *
 * Compatibility is not matched while roaming, except for mode.
 */
static s32
mwifiex_is_network_compatible(struct mwifiex_private *priv,
			      struct mwifiex_bssdescriptor *bss_desc, u32 mode)
{
	struct mwifiex_adapter *adapter = priv->adapter;

	bss_desc->disable_11n = false;

	/* Don't check for compatibility if roaming */
	if (priv->media_connected &&
	    (priv->bss_mode == NL80211_IFTYPE_STATION) &&
	    (bss_desc->bss_mode == NL80211_IFTYPE_STATION))
		return 0;

	if (priv->wps.session_enable) {
		mwifiex_dbg(adapter, IOCTL,
			    "info: return success directly in WPS period\n");
		return 0;
	}

	if (bss_desc->chan_sw_ie_present) {
		mwifiex_dbg(adapter, INFO,
			    "Don't connect to AP with WLAN_EID_CHANNEL_SWITCH\n");
		return -1;
	}

	if (mwifiex_is_bss_wapi(priv, bss_desc)) {
		mwifiex_dbg(adapter, INFO,
			    "info: return success for WAPI AP\n");
		return 0;
	}

	if (bss_desc->bss_mode == mode) {
		if (mwifiex_is_bss_no_sec(priv, bss_desc)) {
			/* No security */
			return 0;
		} else if (mwifiex_is_bss_static_wep(priv, bss_desc)) {
			/* Static WEP enabled */
			mwifiex_dbg(adapter, INFO,
				    "info: Disable 11n in WEP mode.\n");
			bss_desc->disable_11n = true;
			return 0;
		} else if (mwifiex_is_bss_wpa(priv, bss_desc)) {
			/* WPA enabled */
			if (((priv->adapter->config_bands & BAND_GN ||
			      priv->adapter->config_bands & BAND_AN) &&
			     bss_desc->bcn_ht_cap) &&
			    !mwifiex_is_wpa_oui_present(bss_desc,
							 CIPHER_SUITE_CCMP)) {

				if (mwifiex_is_wpa_oui_present
						(bss_desc, CIPHER_SUITE_TKIP)) {
					mwifiex_dbg(adapter, INFO,
						    "info: Disable 11n if AES\t"
						    "is not supported by AP\n");
					bss_desc->disable_11n = true;
				} else {
					return -1;
				}
			}
			return 0;
		} else if (mwifiex_is_bss_wpa2(priv, bss_desc)) {
			/* WPA2 enabled */
			if (((priv->adapter->config_bands & BAND_GN ||
			      priv->adapter->config_bands & BAND_AN) &&
			     bss_desc->bcn_ht_cap) &&
			    !mwifiex_is_rsn_oui_present(bss_desc,
							CIPHER_SUITE_CCMP)) {

				if (mwifiex_is_rsn_oui_present
						(bss_desc, CIPHER_SUITE_TKIP)) {
					mwifiex_dbg(adapter, INFO,
						    "info: Disable 11n if AES\t"
						    "is not supported by AP\n");
					bss_desc->disable_11n = true;
				} else {
					return -1;
				}
			}
			return 0;
		} else if (mwifiex_is_bss_adhoc_aes(priv, bss_desc)) {
			/* Ad-hoc AES enabled */
			return 0;
		} else if (mwifiex_is_bss_dynamic_wep(priv, bss_desc)) {
			/* Dynamic WEP enabled */
			return 0;
		}

		/* Security doesn't match */
		dbg_security_flags(ERROR, "failed", priv, bss_desc);
		return -1;
	}

	/* Mode doesn't match */
	return -1;
}

/*
 * This function creates a channel list for the driver to scan, based
 * on region/band information.
 *
 * This routine is used for any scan that is not provided with a
 * specific channel list to scan.
 */
static int
mwifiex_scan_create_channel_list(struct mwifiex_private *priv,
				 const struct mwifiex_user_scan_cfg
							*user_scan_in,
				 struct mwifiex_chan_scan_param_set
							*scan_chan_list,
				 u8 filtered_scan)
{
	enum nl80211_band band;
	struct ieee80211_supported_band *sband;
	struct ieee80211_channel *ch;
	struct mwifiex_adapter *adapter = priv->adapter;
	int chan_idx = 0, i;

	for (band = 0; (band < NUM_NL80211_BANDS) ; band++) {

		if (!priv->wdev.wiphy->bands[band])
			continue;

		sband = priv->wdev.wiphy->bands[band];

		for (i = 0; (i < sband->n_channels) ; i++) {
			ch = &sband->channels[i];
			if (ch->flags & IEEE80211_CHAN_DISABLED)
				continue;
			scan_chan_list[chan_idx].radio_type = band;

			if (user_scan_in &&
			    user_scan_in->chan_list[0].scan_time)
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16((u16) user_scan_in->
					chan_list[0].scan_time);
			else if (ch->flags & IEEE80211_CHAN_NO_IR)
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16(adapter->passive_scan_time);
			else
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16(adapter->active_scan_time);

			if (ch->flags & IEEE80211_CHAN_NO_IR)
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					|= (MWIFIEX_PASSIVE_SCAN |
					    MWIFIEX_HIDDEN_SSID_REPORT);
			else
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					&= ~MWIFIEX_PASSIVE_SCAN;
			scan_chan_list[chan_idx].chan_number =
							(u32) ch->hw_value;

			scan_chan_list[chan_idx].chan_scan_mode_bitmap
					|= MWIFIEX_DISABLE_CHAN_FILT;

			if (filtered_scan) {
				scan_chan_list[chan_idx].max_scan_time =
				cpu_to_le16(adapter->specific_scan_time);
			}
			chan_idx++;
		}

	}
	return chan_idx;
}

/* This function creates a channel list tlv for bgscan config, based
 * on region/band information.
 */
static int
mwifiex_bgscan_create_channel_list(struct mwifiex_private *priv,
				   const struct mwifiex_bg_scan_cfg
						*bgscan_cfg_in,
				   struct mwifiex_chan_scan_param_set
						*scan_chan_list)
{
	enum nl80211_band band;
	struct ieee80211_supported_band *sband;
	struct ieee80211_channel *ch;
	struct mwifiex_adapter *adapter = priv->adapter;
	int chan_idx = 0, i;

	for (band = 0; (band < NUM_NL80211_BANDS); band++) {
		if (!priv->wdev.wiphy->bands[band])
			continue;

		sband = priv->wdev.wiphy->bands[band];

		for (i = 0; (i < sband->n_channels) ; i++) {
			ch = &sband->channels[i];
			if (ch->flags & IEEE80211_CHAN_DISABLED)
				continue;
			scan_chan_list[chan_idx].radio_type = band;

			if (bgscan_cfg_in->chan_list[0].scan_time)
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16((u16)bgscan_cfg_in->
					chan_list[0].scan_time);
			else if (ch->flags & IEEE80211_CHAN_NO_IR)
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16(adapter->passive_scan_time);
			else
				scan_chan_list[chan_idx].max_scan_time =
					cpu_to_le16(adapter->
						    specific_scan_time);

			if (ch->flags & IEEE80211_CHAN_NO_IR)
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					|= MWIFIEX_PASSIVE_SCAN;
			else
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					&= ~MWIFIEX_PASSIVE_SCAN;

			scan_chan_list[chan_idx].chan_number =
							(u32)ch->hw_value;
			chan_idx++;
		}
	}
	return chan_idx;
}

/* This function appends rate TLV to scan config command. */
static int
mwifiex_append_rate_tlv(struct mwifiex_private *priv,
			struct mwifiex_scan_cmd_config *scan_cfg_out,
			u8 radio)
{
	struct mwifiex_ie_types_rates_param_set *rates_tlv;
	u8 rates[MWIFIEX_SUPPORTED_RATES], *tlv_pos;
	u32 rates_size;

	memset(rates, 0, sizeof(rates));

	tlv_pos = (u8 *)scan_cfg_out->tlv_buf + scan_cfg_out->tlv_buf_len;

	if (priv->scan_request)
		rates_size = mwifiex_get_rates_from_cfg80211(priv, rates,
							     radio);
	else
		rates_size = mwifiex_get_supported_rates(priv, rates);

	mwifiex_dbg(priv->adapter, CMD,
		    "info: SCAN_CMD: Rates size = %d\n",
		rates_size);
	rates_tlv = (struct mwifiex_ie_types_rates_param_set *)tlv_pos;
	rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES);
	rates_tlv->header.len = cpu_to_le16((u16) rates_size);
	memcpy(rates_tlv->rates, rates, rates_size);
	scan_cfg_out->tlv_buf_len += sizeof(rates_tlv->header) + rates_size;

	return rates_size;
}

/*
 * This function constructs and sends multiple scan config commands to
 * the firmware.
 *
 * Previous routines in the code flow have created a scan command configuration
 * with any requested TLVs.  This function splits the channel TLV into maximum
 * channels supported per scan lists and sends the portion of the channel TLV,
 * along with the other TLVs, to the firmware.
 */
static int
mwifiex_scan_channel_list(struct mwifiex_private *priv,
			  u32 max_chan_per_scan, u8 filtered_scan,
			  struct mwifiex_scan_cmd_config *scan_cfg_out,
			  struct mwifiex_ie_types_chan_list_param_set
			  *chan_tlv_out,
			  struct mwifiex_chan_scan_param_set *scan_chan_list)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	int ret = 0;
	struct mwifiex_chan_scan_param_set *tmp_chan_list;
	struct mwifiex_chan_scan_param_set *start_chan;
	u32 tlv_idx, rates_size, cmd_no;
	u32 total_scan_time;
	u32 done_early;
	u8 radio_type;

	if (!scan_cfg_out || !chan_tlv_out || !scan_chan_list) {
		mwifiex_dbg(priv->adapter, ERROR,
			    "info: Scan: Null detect: %p, %p, %p\n",
			    scan_cfg_out, chan_tlv_out, scan_chan_list);
		return -1;
	}

	/* Check csa channel expiry before preparing scan list */
	mwifiex_11h_get_csa_closed_channel(priv);

	chan_tlv_out->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);

	/* Set the temp channel struct pointer to the start of the desired
	   list */
	tmp_chan_list = scan_chan_list;

	/* Loop through the desired channel list, sending a new firmware scan
	   commands for each max_chan_per_scan channels (or for 1,6,11
	   individually if configured accordingly) */
	while (tmp_chan_list->chan_number) {

		tlv_idx = 0;
		total_scan_time = 0;
		radio_type = 0;
		chan_tlv_out->header.len = 0;
		start_chan = tmp_chan_list;
		done_early = false;

		/*
		 * Construct the Channel TLV for the scan command.  Continue to
		 * insert channel TLVs until:
		 *   - the tlv_idx hits the maximum configured per scan command
		 *   - the next channel to insert is 0 (end of desired channel
		 *     list)
		 *   - done_early is set (controlling individual scanning of
		 *     1,6,11)
		 */
		while (tlv_idx < max_chan_per_scan &&
		       tmp_chan_list->chan_number && !done_early) {

			if (tmp_chan_list->chan_number == priv->csa_chan) {
				tmp_chan_list++;
				continue;
			}

			radio_type = tmp_chan_list->radio_type;
			mwifiex_dbg(priv->adapter, INFO,
				    "info: Scan: Chan(%3d), Radio(%d),\t"
				    "Mode(%d, %d), Dur(%d)\n",
				    tmp_chan_list->chan_number,
				    tmp_chan_list->radio_type,
				    tmp_chan_list->chan_scan_mode_bitmap
				    & MWIFIEX_PASSIVE_SCAN,
				    (tmp_chan_list->chan_scan_mode_bitmap
				    & MWIFIEX_DISABLE_CHAN_FILT) >> 1,
				    le16_to_cpu(tmp_chan_list->max_scan_time));

			/* Copy the current channel TLV to the command being
			   prepared */
			memcpy(chan_tlv_out->chan_scan_param + tlv_idx,
			       tmp_chan_list,
			       sizeof(chan_tlv_out->chan_scan_param));

			/* Increment the TLV header length by the size
			   appended */
			le16_add_cpu(&chan_tlv_out->header.len,
				     sizeof(chan_tlv_out->chan_scan_param));

			/*
			 * The tlv buffer length is set to the number of bytes
			 * of the between the channel tlv pointer and the start
			 * of the tlv buffer.  This compensates for any TLVs
			 * that were appended before the channel list.
			 */
			scan_cfg_out->tlv_buf_len = (u32) ((u8 *) chan_tlv_out -
							scan_cfg_out->tlv_buf);

			/* Add the size of the channel tlv header and the data
			   length */
			scan_cfg_out->tlv_buf_len +=
				(sizeof(chan_tlv_out->header)
				 + le16_to_cpu(chan_tlv_out->header.len));

			/* Increment the index to the channel tlv we are
			   constructing */
			tlv_idx++;

			/* Count the total scan time per command */
			total_scan_time +=
				le16_to_cpu(tmp_chan_list->max_scan_time);

			done_early = false;

			/* Stop the loop if the *current* channel is in the
			   1,6,11 set and we are not filtering on a BSSID
			   or SSID. */
			if (!filtered_scan &&
			    (tmp_chan_list->chan_number == 1 ||
			     tmp_chan_list->chan_number == 6 ||
			     tmp_chan_list->chan_number == 11))
				done_early = true;

			/* Increment the tmp pointer to the next channel to
			   be scanned */
			tmp_chan_list++;

			/* Stop the loop if the *next* channel is in the 1,6,11
			   set.  This will cause it to be the only channel
			   scanned on the next interation */
			if (!filtered_scan &&
			    (tmp_chan_list->chan_number == 1 ||
			     tmp_chan_list->chan_number == 6 ||
			     tmp_chan_list->chan_number == 11))
				done_early = true;
		}

		/* The total scan time should be less than scan command timeout
		   value */
		if (total_scan_time > MWIFIEX_MAX_TOTAL_SCAN_TIME) {
			mwifiex_dbg(priv->adapter, ERROR,
				    "total scan time %dms\t"
				    "is over limit (%dms), scan skipped\n",
				    total_scan_time,
				    MWIFIEX_MAX_TOTAL_SCAN_TIME);
			ret = -1;
			break;
		}

		rates_size = mwifiex_append_rate_tlv(priv, scan_cfg_out,
						     radio_type);

		priv->adapter->scan_channels = start_chan;

		/* Send the scan command to the firmware with the specified
		   cfg */
		if (priv->adapter->ext_scan)
			cmd_no = HostCmd_CMD_802_11_SCAN_EXT;
		else
			cmd_no = HostCmd_CMD_802_11_SCAN;

		ret = mwifiex_send_cmd(priv, cmd_no, HostCmd_ACT_GEN_SET,
				       0, scan_cfg_out, false);

		/* rate IE is updated per scan command but same starting
		 * pointer is used each time so that rate IE from earlier
		 * scan_cfg_out->buf is overwritten with new one.
		 */
		scan_cfg_out->tlv_buf_len -=
			    sizeof(struct mwifiex_ie_types_header) + rates_size;

		if (ret) {
			mwifiex_cancel_pending_scan_cmd(adapter);
			break;
		}
	}

	if (ret)
		return -1;

	return 0;
}

/*
 * This function constructs a scan command configuration structure to use
 * in scan commands.
 *
 * Application layer or other functions can invoke network scanning
 * with a scan configuration supplied in a user scan configuration structure.
 * This structure is used as the basis of one or many scan command configuration
 * commands that are sent to the command processing module and eventually to the
 * firmware.
 *
 * This function creates a scan command configuration structure  based on the
 * following user supplied parameters (if present):
 *      - SSID filter
 *      - BSSID filter
 *      - Number of Probes to be sent
 *      - Channel list
 *
 * If the SSID or BSSID filter is not present, the filter is disabled/cleared.
 * If the number of probes is not set, adapter default setting is used.
 */
static void
mwifiex_config_scan(struct mwifiex_private *priv,
		    const struct mwifiex_user_scan_cfg *user_scan_in,
		    struct mwifiex_scan_cmd_config *scan_cfg_out,
		    struct mwifiex_ie_types_chan_list_param_set **chan_list_out,
		    struct mwifiex_chan_scan_param_set *scan_chan_list,
		    u8 *max_chan_per_scan, u8 *filtered_scan,
		    u8 *scan_current_only)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	struct mwifiex_ie_types_num_probes *num_probes_tlv;
	struct mwifiex_ie_types_scan_chan_gap *chan_gap_tlv;
	struct mwifiex_ie_types_random_mac *random_mac_tlv;
	struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
	struct mwifiex_ie_types_bssid_list *bssid_tlv;
	u8 *tlv_pos;
	u32 num_probes;
	u32 ssid_len;
	u32 chan_idx;
	u32 scan_type;
	u16 scan_dur;
	u8 channel;
	u8 radio_type;
	int i;
	u8 ssid_filter;
	struct mwifiex_ie_types_htcap *ht_cap;
	struct mwifiex_ie_types_bss_mode *bss_mode;
	const u8 zero_mac[6] = {0, 0, 0, 0, 0, 0};

	/* The tlv_buf_len is calculated for each scan command.  The TLVs added
	   in this routine will be preserved since the routine that sends the
	   command will append channelTLVs at *chan_list_out.  The difference
	   between the *chan_list_out and the tlv_buf start will be used to
	   calculate the size of anything we add in this routine. */
	scan_cfg_out->tlv_buf_len = 0;

	/* Running tlv pointer.  Assigned to chan_list_out at end of function
	   so later routines know where channels can be added to the command
	   buf */
	tlv_pos = scan_cfg_out->tlv_buf;

	/* Initialize the scan as un-filtered; the flag is later set to TRUE
	   below if a SSID or BSSID filter is sent in the command */
	*filtered_scan = false;

	/* Initialize the scan as not being only on the current channel.  If
	   the channel list is customized, only contains one channel, and is
	   the active channel, this is set true and data flow is not halted. */
	*scan_current_only = false;

	if (user_scan_in) {

		/* Default the ssid_filter flag to TRUE, set false under
		   certain wildcard conditions and qualified by the existence
		   of an SSID list before marking the scan as filtered */
		ssid_filter = true;

		/* Set the BSS type scan filter, use Adapter setting if
		   unset */
		scan_cfg_out->bss_mode =
			(u8)(user_scan_in->bss_mode ?: adapter->scan_mode);

		/* Set the number of probes to send, use Adapter setting
		   if unset */
		num_probes = user_scan_in->num_probes ?: adapter->scan_probes;

		/*
		 * Set the BSSID filter to the incoming configuration,
		 * if non-zero.  If not set, it will remain disabled
		 * (all zeros).
		 */
		memcpy(scan_cfg_out->specific_bssid,
		       user_scan_in->specific_bssid,
		       sizeof(scan_cfg_out->specific_bssid));

		if (adapter->ext_scan &&
		    !is_zero_ether_addr(scan_cfg_out->specific_bssid)) {
			bssid_tlv =
				(struct mwifiex_ie_types_bssid_list *)tlv_pos;
			bssid_tlv->header.type = cpu_to_le16(TLV_TYPE_BSSID);
			bssid_tlv->header.len = cpu_to_le16(ETH_ALEN);
			memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid,
			       ETH_ALEN);
			tlv_pos += sizeof(struct mwifiex_ie_types_bssid_list);
		}

		for (i = 0; i < user_scan_in->num_ssids; i++) {
			ssid_len = user_scan_in->ssid_list[i].ssid_len;

			wildcard_ssid_tlv =
				(struct mwifiex_ie_types_wildcard_ssid_params *)
				tlv_pos;
			wildcard_ssid_tlv->header.type =
				cpu_to_le16(TLV_TYPE_WILDCARDSSID);
			wildcard_ssid_tlv->header.len = cpu_to_le16(
				(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
							 max_ssid_length)));

			/*
			 * max_ssid_length = 0 tells firmware to perform
			 * specific scan for the SSID filled, whereas
			 * max_ssid_length = IEEE80211_MAX_SSID_LEN is for
			 * wildcard scan.
			 */
			if (ssid_len)
				wildcard_ssid_tlv->max_ssid_length = 0;
			else
				wildcard_ssid_tlv->max_ssid_length =
							IEEE80211_MAX_SSID_LEN;

			if (!memcmp(user_scan_in->ssid_list[i].ssid,
				    "DIRECT-", 7))
				wildcard_ssid_tlv->max_ssid_length = 0xfe;

			memcpy(wildcard_ssid_tlv->ssid,
			       user_scan_in->ssid_list[i].ssid, ssid_len);

			tlv_pos += (sizeof(wildcard_ssid_tlv->header)
				+ le16_to_cpu(wildcard_ssid_tlv->header.len));

			mwifiex_dbg(adapter, INFO,
				    "info: scan: ssid[%d]: %s, %d\n",
				    i, wildcard_ssid_tlv->ssid,
				    wildcard_ssid_tlv->max_ssid_length);

			/* Empty wildcard ssid with a maxlen will match many or
			   potentially all SSIDs (maxlen == 32), therefore do
			   not treat the scan as
			   filtered. */
			if (!ssid_len && wildcard_ssid_tlv->max_ssid_length)
				ssid_filter = false;
		}

		/*
		 *  The default number of channels sent in the command is low to
		 *  ensure the response buffer from the firmware does not
		 *  truncate scan results.  That is not an issue with an SSID
		 *  or BSSID filter applied to the scan results in the firmware.
		 */
		if ((i && ssid_filter) ||
		    !is_zero_ether_addr(scan_cfg_out->specific_bssid))
			*filtered_scan = true;

		if (user_scan_in->scan_chan_gap) {
			mwifiex_dbg(adapter, INFO,
				    "info: scan: channel gap = %d\n",
				    user_scan_in->scan_chan_gap);
			*max_chan_per_scan =
					MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN;

			chan_gap_tlv = (void *)tlv_pos;
			chan_gap_tlv->header.type =
					 cpu_to_le16(TLV_TYPE_SCAN_CHANNEL_GAP);
			chan_gap_tlv->header.len =
				    cpu_to_le16(sizeof(chan_gap_tlv->chan_gap));
			chan_gap_tlv->chan_gap =
				     cpu_to_le16((user_scan_in->scan_chan_gap));
			tlv_pos +=
				  sizeof(struct mwifiex_ie_types_scan_chan_gap);
		}

		if (!ether_addr_equal(user_scan_in->random_mac, zero_mac)) {
			random_mac_tlv = (void *)tlv_pos;
			random_mac_tlv->header.type =
					 cpu_to_le16(TLV_TYPE_RANDOM_MAC);
			random_mac_tlv->header.len =
				    cpu_to_le16(sizeof(random_mac_tlv->mac));
			ether_addr_copy(random_mac_tlv->mac,
					user_scan_in->random_mac);
			tlv_pos +=
				  sizeof(struct mwifiex_ie_types_random_mac);
		}
	} else {
		scan_cfg_out->bss_mode = (u8) adapter->scan_mode;
		num_probes = adapter->scan_probes;
	}

	/*
	 *  If a specific BSSID or SSID is used, the number of channels in the
	 *  scan command will be increased to the absolute maximum.
	 */
	if (*filtered_scan)
		*max_chan_per_scan = MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN;
	else
		*max_chan_per_scan = MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD;

	if (adapter->ext_scan) {
		bss_mode = (struct mwifiex_ie_types_bss_mode *)tlv_pos;
		bss_mode->header.type = cpu_to_le16(TLV_TYPE_BSS_MODE);
		bss_mode->header.len = cpu_to_le16(sizeof(bss_mode->bss_mode));
		bss_mode->bss_mode = scan_cfg_out->bss_mode;
		tlv_pos += sizeof(bss_mode->header) +
			   le16_to_cpu(bss_mode->header.len);
	}

	/* If the input config or adapter has the number of Probes set,
	   add tlv */
	if (num_probes) {

		mwifiex_dbg(adapter, INFO,
			    "info: scan: num_probes = %d\n",
			    num_probes);

		num_probes_tlv = (struct mwifiex_ie_types_num_probes *) tlv_pos;
		num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES);
		num_probes_tlv->header.len =
			cpu_to_le16(sizeof(num_probes_tlv->num_probes));
		num_probes_tlv->num_probes = cpu_to_le16((u16) num_probes);

		tlv_pos += sizeof(num_probes_tlv->header) +
			le16_to_cpu(num_probes_tlv->header.len);

	}

	if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) &&
	    (priv->adapter->config_bands & BAND_GN ||
	     priv->adapter->config_bands & BAND_AN)) {
		ht_cap = (struct mwifiex_ie_types_htcap *) tlv_pos;
		memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap));
		ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
		ht_cap->header.len =
				cpu_to_le16(sizeof(struct ieee80211_ht_cap));
		radio_type =
			mwifiex_band_to_radio_type(priv->adapter->config_bands);
		mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap);
		tlv_pos += sizeof(struct mwifiex_ie_types_htcap);
	}

	/* Append vendor specific IE TLV */
	mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_SCAN, &tlv_pos);

	/*
	 * Set the output for the channel TLV to the address in the tlv buffer
	 *   past any TLVs that were added in this function (SSID, num_probes).
	 *   Channel TLVs will be added past this for each scan command,
	 *   preserving the TLVs that were previously added.
	 */
	*chan_list_out =
		(struct mwifiex_ie_types_chan_list_param_set *) tlv_pos;

	if (user_scan_in && user_scan_in->chan_list[0].chan_number) {

		mwifiex_dbg(adapter, INFO,
			    "info: Scan: Using supplied channel list\n");

		for (chan_idx = 0;
		     chan_idx < MWIFIEX_USER_SCAN_CHAN_MAX &&
		     user_scan_in->chan_list[chan_idx].chan_number;
		     chan_idx++) {

			channel = user_scan_in->chan_list[chan_idx].chan_number;
			scan_chan_list[chan_idx].chan_number = channel;

			radio_type =
				user_scan_in->chan_list[chan_idx].radio_type;
			scan_chan_list[chan_idx].radio_type = radio_type;

			scan_type = user_scan_in->chan_list[chan_idx].scan_type;

			if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					|= (MWIFIEX_PASSIVE_SCAN |
					    MWIFIEX_HIDDEN_SSID_REPORT);
			else
				scan_chan_list[chan_idx].chan_scan_mode_bitmap
					&= ~MWIFIEX_PASSIVE_SCAN;

			scan_chan_list[chan_idx].chan_scan_mode_bitmap
				|= MWIFIEX_DISABLE_CHAN_FILT;

			if (user_scan_in->chan_list[chan_idx].scan_time) {
				scan_dur = (u16) user_scan_in->
					chan_list[chan_idx].scan_time;
			} else {
				if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
					scan_dur = adapter->passive_scan_time;
				else if (*filtered_scan)
					scan_dur = adapter->specific_scan_time;
				else
					scan_dur = adapter->active_scan_time;
			}

			scan_chan_list[chan_idx].min_scan_time =
				cpu_to_le16(scan_dur);
			scan_chan_list[chan_idx].max_scan_time =
				cpu_to_le16(scan_dur);
		}

		/* Check if we are only scanning the current channel */
		if ((chan_idx == 1) &&
		    (user_scan_in->chan_list[0].chan_number ==
		     priv->curr_bss_params.bss_descriptor.channel)) {
			*scan_current_only = true;
			mwifiex_dbg(adapter, INFO,
				    "info: Scan: Scanning current channel only\n");
		}
	} else {
		mwifiex_dbg(adapter, INFO,
			    "info: Scan: Creating full region channel list\n");
		mwifiex_scan_create_channel_list(priv, user_scan_in,
						 scan_chan_list,
						 *filtered_scan);
	}

}

/*
 * This function inspects the scan response buffer for pointers to
 * expected TLVs.
 *
 * TLVs can be included at the end of the scan response BSS information.
 *
 * Data in the buffer is parsed pointers to TLVs that can potentially
 * be passed back in the response.
 */
static void
mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter *adapter,
				     struct mwifiex_ie_types_data *tlv,
				     u32 tlv_buf_size, u32 req_tlv_type,
				     struct mwifiex_ie_types_data **tlv_data)
{
	struct mwifiex_ie_types_data *current_tlv;
	u32 tlv_buf_left;
	u32 tlv_type;
	u32 tlv_len;

	current_tlv = tlv;
	tlv_buf_left = tlv_buf_size;
	*tlv_data = NULL;

	mwifiex_dbg(adapter, INFO,
		    "info: SCAN_RESP: tlv_buf_size = %d\n",
		    tlv_buf_size);

	while (tlv_buf_left >= sizeof(struct mwifiex_ie_types_header)) {

		tlv_type = le16_to_cpu(current_tlv->header.type);
		tlv_len = le16_to_cpu(current_tlv->header.len);

		if (sizeof(tlv->header) + tlv_len > tlv_buf_left) {
			mwifiex_dbg(adapter, ERROR,
				    "SCAN_RESP: TLV buffer corrupt\n");
			break;
		}

		if (req_tlv_type == tlv_type) {
			switch (tlv_type) {
			case TLV_TYPE_TSFTIMESTAMP:
				mwifiex_dbg(adapter, INFO,
					    "info: SCAN_RESP: TSF\t"
					    "timestamp TLV, len = %d\n",
					    tlv_len);
				*tlv_data = current_tlv;
				break;
			case TLV_TYPE_CHANNELBANDLIST:
				mwifiex_dbg(adapter, INFO,
					    "info: SCAN_RESP: channel\t"
					    "band list TLV, len = %d\n",
					    tlv_len);
				*tlv_data = current_tlv;
				break;
			default:
				mwifiex_dbg(adapter, ERROR,
					    "SCAN_RESP: unhandled TLV = %d\n",
					    tlv_type);
				/* Give up, this seems corrupted */
				return;
			}
		}

		if (*tlv_data)
			break;


		tlv_buf_left -= (sizeof(tlv->header) + tlv_len);
		current_tlv =
			(struct mwifiex_ie_types_data *) (current_tlv->data +
							  tlv_len);

	}			/* while */
}

/*
 * This function parses provided beacon buffer and updates
 * respective fields in bss descriptor structure.
 */
int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
				    struct mwifiex_bssdescriptor *bss_entry)
{
	int ret = 0;
	u8 element_id;
	struct ieee_types_fh_param_set *fh_param_set;
	struct ieee_types_ds_param_set *ds_param_set;
	struct ieee_types_cf_param_set *cf_param_set;
	struct ieee_types_ibss_param_set *ibss_param_set;
	u8 *current_ptr;
	u8 *rate;
	u8 element_len;
	u16 total_ie_len;
	u8 bytes_to_copy;
	u8 rate_size;
	u8 found_data_rate_ie;
	u32 bytes_left;
	struct ieee_types_vendor_specific *vendor_ie;
	const u8 wpa_oui[4] = { 0x00, 0x50, 0xf2, 0x01 };
	const u8 wmm_oui[4] = { 0x00, 0x50, 0xf2, 0x02 };

	found_data_rate_ie = false;
	rate_size = 0;
	current_ptr = bss_entry->beacon_buf;
	bytes_left = bss_entry->beacon_buf_size;

	/* Process variable IE */
	while (bytes_left >= 2) {
		element_id = *current_ptr;
		element_len = *(current_ptr + 1);
		total_ie_len = element_len + sizeof(struct ieee_types_header);

		if (bytes_left < total_ie_len) {
			mwifiex_dbg(adapter, ERROR,
				    "err: InterpretIE: in processing\t"
				    "IE, bytes left < IE length\n");
			return -1;
		}
		switch (element_id) {
		case WLAN_EID_SSID:
			bss_entry->ssid.ssid_len = element_len;
			memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
			       element_len);
			mwifiex_dbg(adapter, INFO,
				    "info: InterpretIE: ssid: %-32s\n",
				    bss_entry->ssid.ssid);
			break;

		case WLAN_EID_SUPP_RATES:
			memcpy(bss_entry->data_rates, current_ptr + 2,
			       element_len);
			memcpy(bss_entry->supported_rates, current_ptr + 2,
			       element_len);
			rate_size = element_len;
			found_data_rate_ie = true;
			break;

		case WLAN_EID_FH_PARAMS:
			fh_param_set =
				(struct ieee_types_fh_param_set *) current_ptr;
			memcpy(&bss_entry->phy_param_set.fh_param_set,
			       fh_param_set,
			       sizeof(struct ieee_types_fh_param_set));
			break;

		case WLAN_EID_DS_PARAMS:
			ds_param_set =
				(struct ieee_types_ds_param_set *) current_ptr;

			bss_entry->channel = ds_param_set->current_chan;

			memcpy(&bss_entry->phy_param_set.ds_param_set,
			       ds_param_set,
			       sizeof(struct ieee_types_ds_param_set));
			break;

		case WLAN_EID_CF_PARAMS:
			cf_param_set =
				(struct ieee_types_cf_param_set *) current_ptr;
			memcpy(&bss_entry->ss_param_set.cf_param_set,
			       cf_param_set,
			       sizeof(struct ieee_types_cf_param_set));
			break;

		case WLAN_EID_IBSS_PARAMS:
			ibss_param_set =
				(struct ieee_types_ibss_param_set *)
				current_ptr;
			memcpy(&bss_entry->ss_param_set.ibss_param_set,
			       ibss_param_set,
			       sizeof(struct ieee_types_ibss_param_set));
			break;

		case WLAN_EID_ERP_INFO:
			bss_entry->erp_flags = *(current_ptr + 2);
			break;

		case WLAN_EID_PWR_CONSTRAINT:
			bss_entry->local_constraint = *(current_ptr + 2);
			bss_entry->sensed_11h = true;
			break;

		case WLAN_EID_CHANNEL_SWITCH:
			bss_entry->chan_sw_ie_present = true;
		case WLAN_EID_PWR_CAPABILITY:
		case WLAN_EID_TPC_REPORT:
		case WLAN_EID_QUIET:
			bss_entry->sensed_11h = true;
		    break;

		case WLAN_EID_EXT_SUPP_RATES:
			/*
			 * Only process extended supported rate
			 * if data rate is already found.
			 * Data rate IE should come before
			 * extended supported rate IE
			 */
			if (found_data_rate_ie) {
				if ((element_len + rate_size) >
				    MWIFIEX_SUPPORTED_RATES)
					bytes_to_copy =
						(MWIFIEX_SUPPORTED_RATES -
						 rate_size);
				else
					bytes_to_copy = element_len;

				rate = (u8 *) bss_entry->data_rates;
				rate += rate_size;
				memcpy(rate, current_ptr + 2, bytes_to_copy);

				rate = (u8 *) bss_entry->supported_rates;
				rate += rate_size;
				memcpy(rate, current_ptr + 2, bytes_to_copy);
			}
			break;

		case WLAN_EID_VENDOR_SPECIFIC:
			vendor_ie = (struct ieee_types_vendor_specific *)
					current_ptr;

			if (!memcmp
			    (vendor_ie->vend_hdr.oui, wpa_oui,
			     sizeof(wpa_oui))) {
				bss_entry->bcn_wpa_ie =
					(struct ieee_types_vendor_specific *)
					current_ptr;
				bss_entry->wpa_offset = (u16)
					(current_ptr - bss_entry->beacon_buf);
			} else if (!memcmp(vendor_ie->vend_hdr.oui, wmm_oui,
				    sizeof(wmm_oui))) {
				if (total_ie_len ==
				    sizeof(struct ieee_types_wmm_parameter) ||
				    total_ie_len ==
				    sizeof(struct ieee_types_wmm_info))
					/*
					 * Only accept and copy the WMM IE if
					 * it matches the size expected for the
					 * WMM Info IE or the WMM Parameter IE.
					 */
					memcpy((u8 *) &bss_entry->wmm_ie,
					       current_ptr, total_ie_len);
			}
			break;
		case WLAN_EID_RSN:
			bss_entry->bcn_rsn_ie =
				(struct ieee_types_generic *) current_ptr;
			bss_entry->rsn_offset = (u16) (current_ptr -
							bss_entry->beacon_buf);
			break;
		case WLAN_EID_BSS_AC_ACCESS_DELAY:
			bss_entry->bcn_wapi_ie =
				(struct ieee_types_generic *) current_ptr;
			bss_entry->wapi_offset = (u16) (current_ptr -
							bss_entry->beacon_buf);
			break;
		case WLAN_EID_HT_CAPABILITY:
			bss_entry->bcn_ht_cap = (struct ieee80211_ht_cap *)
					(current_ptr +
					sizeof(struct ieee_types_header));
			bss_entry->ht_cap_offset = (u16) (current_ptr +
					sizeof(struct ieee_types_header) -
					bss_entry->beacon_buf);
			break;
		case WLAN_EID_HT_OPERATION:
			bss_entry->bcn_ht_oper =
				(struct ieee80211_ht_operation *)(current_ptr +
					sizeof(struct ieee_types_header));
			bss_entry->ht_info_offset = (u16) (current_ptr +
					sizeof(struct ieee_types_header) -
					bss_entry->beacon_buf);
			break;
		case WLAN_EID_VHT_CAPABILITY:
			bss_entry->disable_11ac = false;
			bss_entry->bcn_vht_cap =
				(void *)(current_ptr +
					 sizeof(struct ieee_types_header));
			bss_entry->vht_cap_offset =
					(u16)((u8 *)bss_entry->bcn_vht_cap -
					      bss_entry->beacon_buf);
			break;
		case WLAN_EID_VHT_OPERATION:
			bss_entry->bcn_vht_oper =
				(void *)(current_ptr +
					 sizeof(struct ieee_types_header));
			bss_entry->vht_info_offset =
					(u16)((u8 *)bss_entry->bcn_vht_oper -
					      bss_entry->beacon_buf);
			break;
		case WLAN_EID_BSS_COEX_2040:
			bss_entry->bcn_bss_co_2040 = current_ptr;
			bss_entry->bss_co_2040_offset =
				(u16) (current_ptr - bss_entry->beacon_buf);
			break;
		case WLAN_EID_EXT_CAPABILITY:
			bss_entry->bcn_ext_cap = current_ptr;
			bss_entry->ext_cap_offset =
				(u16) (current_ptr - bss_entry->beacon_buf);
			break;
		case WLAN_EID_OPMODE_NOTIF:
			bss_entry->oper_mode = (void *)current_ptr;
			bss_entry->oper_mode_offset =
					(u16)((u8 *)bss_entry->oper_mode -
					      bss_entry->beacon_buf);
			break;
		default:
			break;
		}

		current_ptr += element_len + 2;

		/* Need to account for IE ID and IE Len */
		bytes_left -= (element_len + 2);

	}	/* while (bytes_left > 2) */
	return ret;
}

/*
 * This function converts radio type scan parameter to a band configuration
 * to be used in join command.
 */
static u8
mwifiex_radio_type_to_band(u8 radio_type)
{
	switch (radio_type) {
	case HostCmd_SCAN_RADIO_TYPE_A:
		return BAND_A;
	case HostCmd_SCAN_RADIO_TYPE_BG:
	default:
		return BAND_G;
	}
}

/*
 * This is an internal function used to start a scan based on an input
 * configuration.
 *
 * This uses the input user scan configuration information when provided in
 * order to send the appropriate scan commands to firmware to populate or
 * update the internal driver scan table.
 */
int mwifiex_scan_networks(struct mwifiex_private *priv,
			  const struct mwifiex_user_scan_cfg *user_scan_in)
{
	int ret;
	struct mwifiex_adapter *adapter = priv->adapter;
	struct cmd_ctrl_node *cmd_node;
	union mwifiex_scan_cmd_config_tlv *scan_cfg_out;
	struct mwifiex_ie_types_chan_list_param_set *chan_list_out;
	struct mwifiex_chan_scan_param_set *scan_chan_list;
	u8 filtered_scan;
	u8 scan_current_chan_only;
	u8 max_chan_per_scan;
	unsigned long flags;

	if (adapter->scan_processing) {
		mwifiex_dbg(adapter, WARN,
			    "cmd: Scan already in process...\n");
		return -EBUSY;
	}

	if (priv->scan_block) {
		mwifiex_dbg(adapter, WARN,
			    "cmd: Scan is blocked during association...\n");
		return -EBUSY;
	}

	if (adapter->surprise_removed || adapter->is_cmd_timedout) {
		mwifiex_dbg(adapter, ERROR,
			    "Ignore scan. Card removed or firmware in bad state\n");
		return -EFAULT;
	}

	spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
	adapter->scan_processing = true;
	spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);

	scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv),
			       GFP_KERNEL);
	if (!scan_cfg_out) {
		ret = -ENOMEM;
		goto done;
	}

	scan_chan_list = kcalloc(MWIFIEX_USER_SCAN_CHAN_MAX,
				 sizeof(struct mwifiex_chan_scan_param_set),
				 GFP_KERNEL);
	if (!scan_chan_list) {
		kfree(scan_cfg_out);
		ret = -ENOMEM;
		goto done;
	}

	mwifiex_config_scan(priv, user_scan_in, &scan_cfg_out->config,
			    &chan_list_out, scan_chan_list, &max_chan_per_scan,
			    &filtered_scan, &scan_current_chan_only);

	ret = mwifiex_scan_channel_list(priv, max_chan_per_scan, filtered_scan,
					&scan_cfg_out->config, chan_list_out,
					scan_chan_list);

	/* Get scan command from scan_pending_q and put to cmd_pending_q */
	if (!ret) {
		spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
		if (!list_empty(&adapter->scan_pending_q)) {
			cmd_node = list_first_entry(&adapter->scan_pending_q,
						    struct cmd_ctrl_node, list);
			list_del(&cmd_node->list);
			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
					       flags);
			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
							true);
			queue_work(adapter->workqueue, &adapter->main_work);

			/* Perform internal scan synchronously */
			if (!priv->scan_request) {
				mwifiex_dbg(adapter, INFO,
					    "wait internal scan\n");
				mwifiex_wait_queue_complete(adapter, cmd_node);
			}
		} else {
			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
					       flags);
		}
	}

	kfree(scan_cfg_out);
	kfree(scan_chan_list);
done:
	if (ret) {
		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
		adapter->scan_processing = false;
		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
	}
	return ret;
}

/*
 * This function prepares a scan command to be sent to the firmware.
 *
 * This uses the scan command configuration sent to the command processing
 * module in command preparation stage to configure a scan command structure
 * to send to firmware.
 *
 * The fixed fields specifying the BSS type and BSSID filters as well as a
 * variable number/length of TLVs are sent in the command to firmware.
 *
 * Preparation also includes -
 *      - Setting command ID, and proper size
 *      - Ensuring correct endian-ness
 */
int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command *cmd,
			    struct mwifiex_scan_cmd_config *scan_cfg)
{
	struct host_cmd_ds_802_11_scan *scan_cmd = &cmd->params.scan;

	/* Set fixed field variables in scan command */
	scan_cmd->bss_mode = scan_cfg->bss_mode;
	memcpy(scan_cmd->bssid, scan_cfg->specific_bssid,
	       sizeof(scan_cmd->bssid));
	memcpy(scan_cmd->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len);

	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN);

	/* Size is equal to the sizeof(fixed portions) + the TLV len + header */
	cmd->size = cpu_to_le16((u16) (sizeof(scan_cmd->bss_mode)
					  + sizeof(scan_cmd->bssid)
					  + scan_cfg->tlv_buf_len + S_DS_GEN));

	return 0;
}

/*
 * This function checks compatibility of requested network with current
 * driver settings.
 */
int mwifiex_check_network_compatibility(struct mwifiex_private *priv,
					struct mwifiex_bssdescriptor *bss_desc)
{
	int ret = -1;

	if (!bss_desc)
		return -1;

	if ((mwifiex_get_cfp(priv, (u8) bss_desc->bss_band,
			     (u16) bss_desc->channel, 0))) {
		switch (priv->bss_mode) {
		case NL80211_IFTYPE_STATION:
		case NL80211_IFTYPE_ADHOC:
			ret = mwifiex_is_network_compatible(priv, bss_desc,
							    priv->bss_mode);
			if (ret)
				mwifiex_dbg(priv->adapter, ERROR,
					    "Incompatible network settings\n");
			break;
		default:
			ret = 0;
		}
	}

	return ret;
}

/* This function checks if SSID string contains all zeroes or length is zero */
static bool mwifiex_is_hidden_ssid(struct cfg80211_ssid *ssid)
{
	int idx;

	for (idx = 0; idx < ssid->ssid_len; idx++) {
		if (ssid->ssid[idx])
			return false;
	}

	return true;
}

/* This function checks if any hidden SSID found in passive scan channels
 * and save those channels for specific SSID active scan
 */
static int mwifiex_save_hidden_ssid_channels(struct mwifiex_private *priv,
					     struct cfg80211_bss *bss)
{
	struct mwifiex_bssdescriptor *bss_desc;
	int ret;
	int chid;

	/* Allocate and fill new bss descriptor */
	bss_desc = kzalloc(sizeof(*bss_desc), GFP_KERNEL);
	if (!bss_desc)
		return -ENOMEM;

	ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
	if (ret)
		goto done;

	if (mwifiex_is_hidden_ssid(&bss_desc->ssid)) {
		mwifiex_dbg(priv->adapter, INFO, "found hidden SSID\n");
		for (chid = 0 ; chid < MWIFIEX_USER_SCAN_CHAN_MAX; chid++) {
			if (priv->hidden_chan[chid].chan_number ==
			    bss->channel->hw_value)
				break;

			if (!priv->hidden_chan[chid].chan_number) {
				priv->hidden_chan[chid].chan_number =
					bss->channel->hw_value;
				priv->hidden_chan[chid].radio_type =
					bss->channel->band;
				priv->hidden_chan[chid].scan_type =
					MWIFIEX_SCAN_TYPE_ACTIVE;
				break;
			}
		}
	}

done:
	/* beacon_ie buffer was allocated in function
	 * mwifiex_fill_new_bss_desc(). Free it now.
	 */
	kfree(bss_desc->beacon_buf);
	kfree(bss_desc);
	return 0;
}

static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv,
					  struct cfg80211_bss *bss)
{
	struct mwifiex_bssdescriptor *bss_desc;
	int ret;
	unsigned long flags;

	/* Allocate and fill new bss descriptor */
	bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor), GFP_KERNEL);
	if (!bss_desc)
		return -ENOMEM;

	ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
	if (ret)
		goto done;

	ret = mwifiex_check_network_compatibility(priv, bss_desc);
	if (ret)
		goto done;

	spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags);
	/* Make a copy of current BSSID descriptor */
	memcpy(&priv->curr_bss_params.bss_descriptor, bss_desc,
	       sizeof(priv->curr_bss_params.bss_descriptor));

	/* The contents of beacon_ie will be copied to its own buffer
	 * in mwifiex_save_curr_bcn()
	 */
	mwifiex_save_curr_bcn(priv);
	spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags);

done:
	/* beacon_ie buffer was allocated in function
	 * mwifiex_fill_new_bss_desc(). Free it now.
	 */
	kfree(bss_desc->beacon_buf);
	kfree(bss_desc);
	return 0;
}

static int
mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
				  u32 *bytes_left, u64 fw_tsf, u8 *radio_type,
				  bool ext_scan, s32 rssi_val)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	struct mwifiex_chan_freq_power *cfp;
	struct cfg80211_bss *bss;
	u8 bssid[ETH_ALEN];
	s32 rssi;
	const u8 *ie_buf;
	size_t ie_len;
	u16 channel = 0;
	u16 beacon_size = 0;
	u32 curr_bcn_bytes;
	u32 freq;
	u16 beacon_period;
	u16 cap_info_bitmap;
	u8 *current_ptr;
	u64 timestamp;
	struct mwifiex_fixed_bcn_param *bcn_param;
	struct mwifiex_bss_priv *bss_priv;

	if (*bytes_left >= sizeof(beacon_size)) {
		/* Extract & convert beacon size from command buffer */
		beacon_size = le16_to_cpu(*(__le16 *)(*bss_info));
		*bytes_left -= sizeof(beacon_size);
		*bss_info += sizeof(beacon_size);
	}

	if (!beacon_size || beacon_size > *bytes_left) {
		*bss_info += *bytes_left;
		*bytes_left = 0;
		return -EFAULT;
	}

	/* Initialize the current working beacon pointer for this BSS
	 * iteration
	 */
	current_ptr = *bss_info;

	/* Advance the return beacon pointer past the current beacon */
	*bss_info += beacon_size;
	*bytes_left -= beacon_size;

	curr_bcn_bytes = beacon_size;

	/* First 5 fields are bssid, RSSI(for legacy scan only),
	 * time stamp, beacon interval, and capability information
	 */
	if (curr_bcn_bytes < ETH_ALEN + sizeof(u8) +
	    sizeof(struct mwifiex_fixed_bcn_param)) {
		mwifiex_dbg(adapter, ERROR,
			    "InterpretIE: not enough bytes left\n");
		return -EFAULT;
	}

	memcpy(bssid, current_ptr, ETH_ALEN);
	current_ptr += ETH_ALEN;
	curr_bcn_bytes -= ETH_ALEN;

	if (!ext_scan) {
		rssi = (s32) *current_ptr;
		rssi = (-rssi) * 100;		/* Convert dBm to mBm */
		current_ptr += sizeof(u8);
		curr_bcn_bytes -= sizeof(u8);
		mwifiex_dbg(adapter, INFO,
			    "info: InterpretIE: RSSI=%d\n", rssi);
	} else {
		rssi = rssi_val;
	}

	bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr;
	current_ptr += sizeof(*bcn_param);
	curr_bcn_bytes -= sizeof(*bcn_param);

	timestamp = le64_to_cpu(bcn_param->timestamp);
	beacon_period = le16_to_cpu(bcn_param->beacon_period);

	cap_info_bitmap = le16_to_cpu(bcn_param->cap_info_bitmap);
	mwifiex_dbg(adapter, INFO,
		    "info: InterpretIE: capabilities=0x%X\n",
		    cap_info_bitmap);

	/* Rest of the current buffer are IE's */
	ie_buf = current_ptr;
	ie_len = curr_bcn_bytes;
	mwifiex_dbg(adapter, INFO,
		    "info: InterpretIE: IELength for this AP = %d\n",
		    curr_bcn_bytes);

	while (curr_bcn_bytes >= sizeof(struct ieee_types_header)) {
		u8 element_id, element_len;

		element_id = *current_ptr;
		element_len = *(current_ptr + 1);
		if (curr_bcn_bytes < element_len +
				sizeof(struct ieee_types_header)) {
			mwifiex_dbg(adapter, ERROR,
				    "%s: bytes left < IE length\n", __func__);
			return -EFAULT;
		}
		if (element_id == WLAN_EID_DS_PARAMS) {
			channel = *(current_ptr +
				    sizeof(struct ieee_types_header));
			break;
		}

		current_ptr += element_len + sizeof(struct ieee_types_header);
		curr_bcn_bytes -= element_len +
					sizeof(struct ieee_types_header);
	}

	if (channel) {
		struct ieee80211_channel *chan;
		u8 band;

		/* Skip entry if on csa closed channel */
		if (channel == priv->csa_chan) {
			mwifiex_dbg(adapter, WARN,
				    "Dropping entry on csa closed channel\n");
			return 0;
		}

		band = BAND_G;
		if (radio_type)
			band = mwifiex_radio_type_to_band(*radio_type &
							  (BIT(0) | BIT(1)));

		cfp = mwifiex_get_cfp(priv, band, channel, 0);

		freq = cfp ? cfp->freq : 0;

		chan = ieee80211_get_channel(priv->wdev.wiphy, freq);

		if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
			bss = cfg80211_inform_bss(priv->wdev.wiphy,
					    chan, CFG80211_BSS_FTYPE_UNKNOWN,
					    bssid, timestamp,
					    cap_info_bitmap, beacon_period,
					    ie_buf, ie_len, rssi, GFP_KERNEL);
			if (bss) {
				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
				bss_priv->band = band;
				bss_priv->fw_tsf = fw_tsf;
				if (priv->media_connected &&
				    !memcmp(bssid, priv->curr_bss_params.
					    bss_descriptor.mac_address,
					    ETH_ALEN))
					mwifiex_update_curr_bss_params(priv,
								       bss);
				cfg80211_put_bss(priv->wdev.wiphy, bss);
			}

			if ((chan->flags & IEEE80211_CHAN_RADAR) ||
			    (chan->flags & IEEE80211_CHAN_NO_IR)) {
				mwifiex_dbg(adapter, INFO,
					    "radar or passive channel %d\n",
					    channel);
				mwifiex_save_hidden_ssid_channels(priv, bss);
			}
		}
	} else {
		mwifiex_dbg(adapter, WARN, "missing BSS channel IE\n");
	}

	return 0;
}

static void mwifiex_complete_scan(struct mwifiex_private *priv)
{
	struct mwifiex_adapter *adapter = priv->adapter;

	adapter->survey_idx = 0;
	if (adapter->curr_cmd->wait_q_enabled) {
		adapter->cmd_wait_q.status = 0;
		if (!priv->scan_request) {
			mwifiex_dbg(adapter, INFO,
				    "complete internal scan\n");
			mwifiex_complete_cmd(adapter, adapter->curr_cmd);
		}
	}
}

/* This function checks if any hidden SSID found in passive scan channels
 * and do specific SSID active scan for those channels
 */
static int
mwifiex_active_scan_req_for_passive_chan(struct mwifiex_private *priv)
{
	int ret;
	struct mwifiex_adapter *adapter = priv->adapter;
	u8 id = 0;
	struct mwifiex_user_scan_cfg  *user_scan_cfg;

	if (adapter->active_scan_triggered || !priv->scan_request ||
	    priv->scan_aborting) {
		adapter->active_scan_triggered = false;
		return 0;
	}

	if (!priv->hidden_chan[0].chan_number) {
		mwifiex_dbg(adapter, INFO, "No BSS with hidden SSID found on DFS channels\n");
		return 0;
	}
	user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL);

	if (!user_scan_cfg)
		return -ENOMEM;

	memset(user_scan_cfg, 0, sizeof(*user_scan_cfg));

	for (id = 0; id < MWIFIEX_USER_SCAN_CHAN_MAX; id++) {
		if (!priv->hidden_chan[id].chan_number)
			break;
		memcpy(&user_scan_cfg->chan_list[id],
		       &priv->hidden_chan[id],
		       sizeof(struct mwifiex_user_scan_chan));
	}

	adapter->active_scan_triggered = true;
	ether_addr_copy(user_scan_cfg->random_mac, priv->random_mac);
	user_scan_cfg->num_ssids = priv->scan_request->n_ssids;
	user_scan_cfg->ssid_list = priv->scan_request->ssids;

	ret = mwifiex_scan_networks(priv, user_scan_cfg);
	kfree(user_scan_cfg);

	memset(&priv->hidden_chan, 0, sizeof(priv->hidden_chan));

	if (ret) {
		dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
		return ret;
	}

	return 0;
}
static void mwifiex_check_next_scan_command(struct mwifiex_private *priv)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	struct cmd_ctrl_node *cmd_node;
	unsigned long flags;

	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
	if (list_empty(&adapter->scan_pending_q)) {
		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);

		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
		adapter->scan_processing = false;
		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);

		mwifiex_active_scan_req_for_passive_chan(priv);

		if (!adapter->ext_scan)
			mwifiex_complete_scan(priv);

		if (priv->scan_request) {
			struct cfg80211_scan_info info = {
				.aborted = false,
			};

			mwifiex_dbg(adapter, INFO,
				    "info: notifying scan done\n");
			cfg80211_scan_done(priv->scan_request, &info);
			priv->scan_request = NULL;
			priv->scan_aborting = false;
		} else {
			priv->scan_aborting = false;
			mwifiex_dbg(adapter, INFO,
				    "info: scan already aborted\n");
		}
	} else if ((priv->scan_aborting && !priv->scan_request) ||
		   priv->scan_block) {
		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);

		mwifiex_cancel_pending_scan_cmd(adapter);

		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
		adapter->scan_processing = false;
		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);

		if (!adapter->active_scan_triggered) {
			if (priv->scan_request) {
				struct cfg80211_scan_info info = {
					.aborted = true,
				};

				mwifiex_dbg(adapter, INFO,
					    "info: aborting scan\n");
				cfg80211_scan_done(priv->scan_request, &info);
				priv->scan_request = NULL;
				priv->scan_aborting = false;
			} else {
				priv->scan_aborting = false;
				mwifiex_dbg(adapter, INFO,
					    "info: scan already aborted\n");
			}
		}
	} else {
		/* Get scan command from scan_pending_q and put to
		 * cmd_pending_q
		 */
		cmd_node = list_first_entry(&adapter->scan_pending_q,
					    struct cmd_ctrl_node, list);
		list_del(&cmd_node->list);
		spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
		mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
	}

	return;
}

void mwifiex_cancel_scan(struct mwifiex_adapter *adapter)
{
	struct mwifiex_private *priv;
	unsigned long cmd_flags;
	int i;

	mwifiex_cancel_pending_scan_cmd(adapter);

	if (adapter->scan_processing) {
		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags);
		adapter->scan_processing = false;
		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
		for (i = 0; i < adapter->priv_num; i++) {
			priv = adapter->priv[i];
			if (!priv)
				continue;
			if (priv->scan_request) {
				struct cfg80211_scan_info info = {
					.aborted = true,
				};

				mwifiex_dbg(adapter, INFO,
					    "info: aborting scan\n");
				cfg80211_scan_done(priv->scan_request, &info);
				priv->scan_request = NULL;
				priv->scan_aborting = false;
			}
		}
	}
}

/*
 * This function handles the command response of scan.
 *
 * The response buffer for the scan command has the following
 * memory layout:
 *
 *      .-------------------------------------------------------------.
 *      |  Header (4 * sizeof(t_u16)):  Standard command response hdr |
 *      .-------------------------------------------------------------.
 *      |  BufSize (t_u16) : sizeof the BSS Description data          |
 *      .-------------------------------------------------------------.
 *      |  NumOfSet (t_u8) : Number of BSS Descs returned             |
 *      .-------------------------------------------------------------.
 *      |  BSSDescription data (variable, size given in BufSize)      |
 *      .-------------------------------------------------------------.
 *      |  TLV data (variable, size calculated using Header->Size,    |
 *      |            BufSize and sizeof the fixed fields above)       |
 *      .-------------------------------------------------------------.
 */
int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
			    struct host_cmd_ds_command *resp)
{
	int ret = 0;
	struct mwifiex_adapter *adapter = priv->adapter;
	struct host_cmd_ds_802_11_scan_rsp *scan_rsp;
	struct mwifiex_ie_types_data *tlv_data;
	struct mwifiex_ie_types_tsf_timestamp *tsf_tlv;
	u8 *bss_info;
	u32 scan_resp_size;
	u32 bytes_left;
	u32 idx;
	u32 tlv_buf_size;
	struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv;
	struct chan_band_param_set *chan_band;
	u8 is_bgscan_resp;
	__le64 fw_tsf = 0;
	u8 *radio_type;
	struct cfg80211_wowlan_nd_match *pmatch;
	struct cfg80211_sched_scan_request *nd_config = NULL;

	is_bgscan_resp = (le16_to_cpu(resp->command)
			  == HostCmd_CMD_802_11_BG_SCAN_QUERY);
	if (is_bgscan_resp)
		scan_rsp = &resp->params.bg_scan_query_resp.scan_resp;
	else
		scan_rsp = &resp->params.scan_resp;


	if (scan_rsp->number_of_sets > MWIFIEX_MAX_AP) {
		mwifiex_dbg(adapter, ERROR,
			    "SCAN_RESP: too many AP returned (%d)\n",
			    scan_rsp->number_of_sets);
		ret = -1;
		goto check_next_scan;
	}

	/* Check csa channel expiry before parsing scan response */
	mwifiex_11h_get_csa_closed_channel(priv);

	bytes_left = le16_to_cpu(scan_rsp->bss_descript_size);
	mwifiex_dbg(adapter, INFO,
		    "info: SCAN_RESP: bss_descript_size %d\n",
		    bytes_left);

	scan_resp_size = le16_to_cpu(resp->size);

	mwifiex_dbg(adapter, INFO,
		    "info: SCAN_RESP: returned %d APs before parsing\n",
		    scan_rsp->number_of_sets);

	bss_info = scan_rsp->bss_desc_and_tlv_buffer;

	/*
	 * The size of the TLV buffer is equal to the entire command response
	 *   size (scan_resp_size) minus the fixed fields (sizeof()'s), the
	 *   BSS Descriptions (bss_descript_size as bytesLef) and the command
	 *   response header (S_DS_GEN)
	 */
	tlv_buf_size = scan_resp_size - (bytes_left
					 + sizeof(scan_rsp->bss_descript_size)
					 + sizeof(scan_rsp->number_of_sets)
					 + S_DS_GEN);

	tlv_data = (struct mwifiex_ie_types_data *) (scan_rsp->
						 bss_desc_and_tlv_buffer +
						 bytes_left);

	/* Search the TLV buffer space in the scan response for any valid
	   TLVs */
	mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
					     TLV_TYPE_TSFTIMESTAMP,
					     (struct mwifiex_ie_types_data **)
					     &tsf_tlv);

	/* Search the TLV buffer space in the scan response for any valid
	   TLVs */
	mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size,
					     TLV_TYPE_CHANNELBANDLIST,
					     (struct mwifiex_ie_types_data **)
					     &chan_band_tlv);

#ifdef CONFIG_PM
	if (priv->wdev.wiphy->wowlan_config)
		nd_config = priv->wdev.wiphy->wowlan_config->nd_config;
#endif

	if (nd_config) {
		adapter->nd_info =
			kzalloc(sizeof(struct cfg80211_wowlan_nd_match) +
				sizeof(struct cfg80211_wowlan_nd_match *) *
				scan_rsp->number_of_sets, GFP_ATOMIC);

		if (adapter->nd_info)
			adapter->nd_info->n_matches = scan_rsp->number_of_sets;
	}

	for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) {
		/*
		 * If the TSF TLV was appended to the scan results, save this
		 * entry's TSF value in the fw_tsf field. It is the firmware's
		 * TSF value at the time the beacon or probe response was
		 * received.
		 */
		if (tsf_tlv)
			memcpy(&fw_tsf, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE],
			       sizeof(fw_tsf));

		if (chan_band_tlv) {
			chan_band = &chan_band_tlv->chan_band_param[idx];
			radio_type = &chan_band->radio_type;
		} else {
			radio_type = NULL;
		}

		if (chan_band_tlv && adapter->nd_info) {
			adapter->nd_info->matches[idx] =
				kzalloc(sizeof(*pmatch) + sizeof(u32),
					GFP_ATOMIC);

			pmatch = adapter->nd_info->matches[idx];

			if (pmatch) {
				pmatch->n_channels = 1;
				pmatch->channels[0] = chan_band->chan_number;
			}
		}

		ret = mwifiex_parse_single_response_buf(priv, &bss_info,
							&bytes_left,
							le64_to_cpu(fw_tsf),
							radio_type, false, 0);
		if (ret)
			goto check_next_scan;
	}

check_next_scan:
	mwifiex_check_next_scan_command(priv);
	return ret;
}

/*
 * This function prepares an extended scan command to be sent to the firmware
 *
 * This uses the scan command configuration sent to the command processing
 * module in command preparation stage to configure a extended scan command
 * structure to send to firmware.
 */
int mwifiex_cmd_802_11_scan_ext(struct mwifiex_private *priv,
				struct host_cmd_ds_command *cmd,
				void *data_buf)
{
	struct host_cmd_ds_802_11_scan_ext *ext_scan = &cmd->params.ext_scan;
	struct mwifiex_scan_cmd_config *scan_cfg = data_buf;

	memcpy(ext_scan->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len);

	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN_EXT);

	/* Size is equal to the sizeof(fixed portions) + the TLV len + header */
	cmd->size = cpu_to_le16((u16)(sizeof(ext_scan->reserved)
				      + scan_cfg->tlv_buf_len + S_DS_GEN));

	return 0;
}

/* This function prepares an background scan config command to be sent
 * to the firmware
 */
int mwifiex_cmd_802_11_bg_scan_config(struct mwifiex_private *priv,
				      struct host_cmd_ds_command *cmd,
				      void *data_buf)
{
	struct host_cmd_ds_802_11_bg_scan_config *bgscan_config =
					&cmd->params.bg_scan_config;
	struct mwifiex_bg_scan_cfg *bgscan_cfg_in = data_buf;
	u8 *tlv_pos = bgscan_config->tlv;
	u8 num_probes;
	u32 ssid_len, chan_idx, scan_type, scan_dur, chan_num;
	int i;
	struct mwifiex_ie_types_num_probes *num_probes_tlv;
	struct mwifiex_ie_types_repeat_count *repeat_count_tlv;
	struct mwifiex_ie_types_min_rssi_threshold *rssi_threshold_tlv;
	struct mwifiex_ie_types_bgscan_start_later *start_later_tlv;
	struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
	struct mwifiex_ie_types_chan_list_param_set *chan_list_tlv;
	struct mwifiex_chan_scan_param_set *temp_chan;

	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_CONFIG);
	cmd->size = cpu_to_le16(sizeof(*bgscan_config) + S_DS_GEN);

	bgscan_config->action = cpu_to_le16(bgscan_cfg_in->action);
	bgscan_config->enable = bgscan_cfg_in->enable;
	bgscan_config->bss_type = bgscan_cfg_in->bss_type;
	bgscan_config->scan_interval =
		cpu_to_le32(bgscan_cfg_in->scan_interval);
	bgscan_config->report_condition =
		cpu_to_le32(bgscan_cfg_in->report_condition);

	/*  stop sched scan  */
	if (!bgscan_config->enable)
		return 0;

	bgscan_config->chan_per_scan = bgscan_cfg_in->chan_per_scan;

	num_probes = (bgscan_cfg_in->num_probes ? bgscan_cfg_in->
		      num_probes : priv->adapter->scan_probes);

	if (num_probes) {
		num_probes_tlv = (struct mwifiex_ie_types_num_probes *)tlv_pos;
		num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES);
		num_probes_tlv->header.len =
			cpu_to_le16(sizeof(num_probes_tlv->num_probes));
		num_probes_tlv->num_probes = cpu_to_le16((u16)num_probes);

		tlv_pos += sizeof(num_probes_tlv->header) +
			le16_to_cpu(num_probes_tlv->header.len);
	}

	if (bgscan_cfg_in->repeat_count) {
		repeat_count_tlv =
			(struct mwifiex_ie_types_repeat_count *)tlv_pos;
		repeat_count_tlv->header.type =
			cpu_to_le16(TLV_TYPE_REPEAT_COUNT);
		repeat_count_tlv->header.len =
			cpu_to_le16(sizeof(repeat_count_tlv->repeat_count));
		repeat_count_tlv->repeat_count =
			cpu_to_le16(bgscan_cfg_in->repeat_count);

		tlv_pos += sizeof(repeat_count_tlv->header) +
			le16_to_cpu(repeat_count_tlv->header.len);
	}

	if (bgscan_cfg_in->rssi_threshold) {
		rssi_threshold_tlv =
			(struct mwifiex_ie_types_min_rssi_threshold *)tlv_pos;
		rssi_threshold_tlv->header.type =
			cpu_to_le16(TLV_TYPE_RSSI_LOW);
		rssi_threshold_tlv->header.len =
			cpu_to_le16(sizeof(rssi_threshold_tlv->rssi_threshold));
		rssi_threshold_tlv->rssi_threshold =
			cpu_to_le16(bgscan_cfg_in->rssi_threshold);

		tlv_pos += sizeof(rssi_threshold_tlv->header) +
			le16_to_cpu(rssi_threshold_tlv->header.len);
	}

	for (i = 0; i < bgscan_cfg_in->num_ssids; i++) {
		ssid_len = bgscan_cfg_in->ssid_list[i].ssid.ssid_len;

		wildcard_ssid_tlv =
			(struct mwifiex_ie_types_wildcard_ssid_params *)tlv_pos;
		wildcard_ssid_tlv->header.type =
				cpu_to_le16(TLV_TYPE_WILDCARDSSID);
		wildcard_ssid_tlv->header.len = cpu_to_le16(
				(u16)(ssid_len + sizeof(wildcard_ssid_tlv->
							 max_ssid_length)));

		/* max_ssid_length = 0 tells firmware to perform
		 * specific scan for the SSID filled, whereas
		 * max_ssid_length = IEEE80211_MAX_SSID_LEN is for
		 * wildcard scan.
		 */
		if (ssid_len)
			wildcard_ssid_tlv->max_ssid_length = 0;
		else
			wildcard_ssid_tlv->max_ssid_length =
						IEEE80211_MAX_SSID_LEN;

		memcpy(wildcard_ssid_tlv->ssid,
		       bgscan_cfg_in->ssid_list[i].ssid.ssid, ssid_len);

		tlv_pos += (sizeof(wildcard_ssid_tlv->header)
				+ le16_to_cpu(wildcard_ssid_tlv->header.len));
	}

	chan_list_tlv = (struct mwifiex_ie_types_chan_list_param_set *)tlv_pos;

	if (bgscan_cfg_in->chan_list[0].chan_number) {
		dev_dbg(priv->adapter->dev, "info: bgscan: Using supplied channel list\n");

		chan_list_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);

		for (chan_idx = 0;
		     chan_idx < MWIFIEX_BG_SCAN_CHAN_MAX &&
		     bgscan_cfg_in->chan_list[chan_idx].chan_number;
		     chan_idx++) {
			temp_chan = chan_list_tlv->chan_scan_param + chan_idx;

			/* Increment the TLV header length by size appended */
			le16_add_cpu(&chan_list_tlv->header.len,
				     sizeof(chan_list_tlv->chan_scan_param));

			temp_chan->chan_number =
				bgscan_cfg_in->chan_list[chan_idx].chan_number;
			temp_chan->radio_type =
				bgscan_cfg_in->chan_list[chan_idx].radio_type;

			scan_type =
				bgscan_cfg_in->chan_list[chan_idx].scan_type;

			if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
				temp_chan->chan_scan_mode_bitmap
					|= MWIFIEX_PASSIVE_SCAN;
			else
				temp_chan->chan_scan_mode_bitmap
					&= ~MWIFIEX_PASSIVE_SCAN;

			if (bgscan_cfg_in->chan_list[chan_idx].scan_time) {
				scan_dur = (u16)bgscan_cfg_in->
					chan_list[chan_idx].scan_time;
			} else {
				scan_dur = (scan_type ==
					    MWIFIEX_SCAN_TYPE_PASSIVE) ?
					    priv->adapter->passive_scan_time :
					    priv->adapter->specific_scan_time;
			}

			temp_chan->min_scan_time = cpu_to_le16(scan_dur);
			temp_chan->max_scan_time = cpu_to_le16(scan_dur);
		}
	} else {
		dev_dbg(priv->adapter->dev,
			"info: bgscan: Creating full region channel list\n");
		chan_num =
			mwifiex_bgscan_create_channel_list(priv, bgscan_cfg_in,
							   chan_list_tlv->
							   chan_scan_param);
		le16_add_cpu(&chan_list_tlv->header.len,
			     chan_num *
			     sizeof(chan_list_tlv->chan_scan_param[0]));
	}

	tlv_pos += (sizeof(chan_list_tlv->header)
			+ le16_to_cpu(chan_list_tlv->header.len));

	if (bgscan_cfg_in->start_later) {
		start_later_tlv =
			(struct mwifiex_ie_types_bgscan_start_later *)tlv_pos;
		start_later_tlv->header.type =
			cpu_to_le16(TLV_TYPE_BGSCAN_START_LATER);
		start_later_tlv->header.len =
			cpu_to_le16(sizeof(start_later_tlv->start_later));
		start_later_tlv->start_later =
			cpu_to_le16(bgscan_cfg_in->start_later);

		tlv_pos += sizeof(start_later_tlv->header) +
			le16_to_cpu(start_later_tlv->header.len);
	}

	/* Append vendor specific IE TLV */
	mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_BGSCAN, &tlv_pos);

	le16_add_cpu(&cmd->size, tlv_pos - bgscan_config->tlv);

	return 0;
}

int mwifiex_stop_bg_scan(struct mwifiex_private *priv)
{
	struct mwifiex_bg_scan_cfg *bgscan_cfg;

	if (!priv->sched_scanning) {
		dev_dbg(priv->adapter->dev, "bgscan already stopped!\n");
		return 0;
	}

	bgscan_cfg = kzalloc(sizeof(*bgscan_cfg), GFP_KERNEL);
	if (!bgscan_cfg)
		return -ENOMEM;

	bgscan_cfg->bss_type = MWIFIEX_BSS_MODE_INFRA;
	bgscan_cfg->action = MWIFIEX_BGSCAN_ACT_SET;
	bgscan_cfg->enable = false;

	if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11_BG_SCAN_CONFIG,
			     HostCmd_ACT_GEN_SET, 0, bgscan_cfg, true)) {
		kfree(bgscan_cfg);
		return -EFAULT;
	}

	kfree(bgscan_cfg);
	priv->sched_scanning = false;

	return 0;
}

static void
mwifiex_update_chan_statistics(struct mwifiex_private *priv,
			       struct mwifiex_ietypes_chanstats *tlv_stat)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	u8 i, num_chan;
	struct mwifiex_fw_chan_stats *fw_chan_stats;
	struct mwifiex_chan_stats chan_stats;

	fw_chan_stats = (void *)((u8 *)tlv_stat +
			      sizeof(struct mwifiex_ie_types_header));
	num_chan = le16_to_cpu(tlv_stat->header.len) /
					      sizeof(struct mwifiex_chan_stats);

	for (i = 0 ; i < num_chan; i++) {
		chan_stats.chan_num = fw_chan_stats->chan_num;
		chan_stats.bandcfg = fw_chan_stats->bandcfg;
		chan_stats.flags = fw_chan_stats->flags;
		chan_stats.noise = fw_chan_stats->noise;
		chan_stats.total_bss = le16_to_cpu(fw_chan_stats->total_bss);
		chan_stats.cca_scan_dur =
				       le16_to_cpu(fw_chan_stats->cca_scan_dur);
		chan_stats.cca_busy_dur =
				       le16_to_cpu(fw_chan_stats->cca_busy_dur);
		mwifiex_dbg(adapter, INFO,
			    "chan=%d, noise=%d, total_network=%d scan_duration=%d, busy_duration=%d\n",
			    chan_stats.chan_num,
			    chan_stats.noise,
			    chan_stats.total_bss,
			    chan_stats.cca_scan_dur,
			    chan_stats.cca_busy_dur);
		memcpy(&adapter->chan_stats[adapter->survey_idx++], &chan_stats,
		       sizeof(struct mwifiex_chan_stats));
		fw_chan_stats++;
	}
}

/* This function handles the command response of extended scan */
int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv,
				struct host_cmd_ds_command *resp)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	struct host_cmd_ds_802_11_scan_ext *ext_scan_resp;
	struct mwifiex_ie_types_header *tlv;
	struct mwifiex_ietypes_chanstats *tlv_stat;
	u16 buf_left, type, len;

	struct host_cmd_ds_command *cmd_ptr;
	struct cmd_ctrl_node *cmd_node;
	unsigned long cmd_flags, scan_flags;
	bool complete_scan = false;

	mwifiex_dbg(adapter, INFO, "info: EXT scan returns successfully\n");

	ext_scan_resp = &resp->params.ext_scan;

	tlv = (void *)ext_scan_resp->tlv_buffer;
	buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN
					      - 1);

	while (buf_left >= sizeof(struct mwifiex_ie_types_header)) {
		type = le16_to_cpu(tlv->type);
		len = le16_to_cpu(tlv->len);

		if (buf_left < (sizeof(struct mwifiex_ie_types_header) + len)) {
			mwifiex_dbg(adapter, ERROR,
				    "error processing scan response TLVs");
			break;
		}

		switch (type) {
		case TLV_TYPE_CHANNEL_STATS:
			tlv_stat = (void *)tlv;
			mwifiex_update_chan_statistics(priv, tlv_stat);
			break;
		default:
			break;
		}

		buf_left -= len + sizeof(struct mwifiex_ie_types_header);
		tlv = (void *)((u8 *)tlv + len +
			       sizeof(struct mwifiex_ie_types_header));
	}

	spin_lock_irqsave(&adapter->cmd_pending_q_lock, cmd_flags);
	spin_lock_irqsave(&adapter->scan_pending_q_lock, scan_flags);
	if (list_empty(&adapter->scan_pending_q)) {
		complete_scan = true;
		list_for_each_entry(cmd_node, &adapter->cmd_pending_q, list) {
			cmd_ptr = (void *)cmd_node->cmd_skb->data;
			if (le16_to_cpu(cmd_ptr->command) ==
			    HostCmd_CMD_802_11_SCAN_EXT) {
				mwifiex_dbg(adapter, INFO,
					    "Scan pending in command pending list");
				complete_scan = false;
				break;
			}
		}
	}
	spin_unlock_irqrestore(&adapter->scan_pending_q_lock, scan_flags);
	spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, cmd_flags);

	if (complete_scan)
		mwifiex_complete_scan(priv);

	return 0;
}

/* This function This function handles the event extended scan report. It
 * parses extended scan results and informs to cfg80211 stack.
 */
int mwifiex_handle_event_ext_scan_report(struct mwifiex_private *priv,
					 void *buf)
{
	int ret = 0;
	struct mwifiex_adapter *adapter = priv->adapter;
	u8 *bss_info;
	u32 bytes_left, bytes_left_for_tlv, idx;
	u16 type, len;
	struct mwifiex_ie_types_data *tlv;
	struct mwifiex_ie_types_bss_scan_rsp *scan_rsp_tlv;
	struct mwifiex_ie_types_bss_scan_info *scan_info_tlv;
	u8 *radio_type;
	u64 fw_tsf = 0;
	s32 rssi = 0;
	struct mwifiex_event_scan_result *event_scan = buf;
	u8 num_of_set = event_scan->num_of_set;
	u8 *scan_resp = buf + sizeof(struct mwifiex_event_scan_result);
	u16 scan_resp_size = le16_to_cpu(event_scan->buf_size);

	if (num_of_set > MWIFIEX_MAX_AP) {
		mwifiex_dbg(adapter, ERROR,
			    "EXT_SCAN: Invalid number of AP returned (%d)!!\n",
			    num_of_set);
		ret = -1;
		goto check_next_scan;
	}

	bytes_left = scan_resp_size;
	mwifiex_dbg(adapter, INFO,
		    "EXT_SCAN: size %d, returned %d APs...",
		    scan_resp_size, num_of_set);
	mwifiex_dbg_dump(adapter, CMD_D, "EXT_SCAN buffer:", buf,
			 scan_resp_size +
			 sizeof(struct mwifiex_event_scan_result));

	tlv = (struct mwifiex_ie_types_data *)scan_resp;

	for (idx = 0; idx < num_of_set && bytes_left; idx++) {
		type = le16_to_cpu(tlv->header.type);
		len = le16_to_cpu(tlv->header.len);
		if (bytes_left < sizeof(struct mwifiex_ie_types_header) + len) {
			mwifiex_dbg(adapter, ERROR,
				    "EXT_SCAN: Error bytes left < TLV length\n");
			break;
		}
		scan_rsp_tlv = NULL;
		scan_info_tlv = NULL;
		bytes_left_for_tlv = bytes_left;

		/* BSS response TLV with beacon or probe response buffer
		 * at the initial position of each descriptor
		 */
		if (type != TLV_TYPE_BSS_SCAN_RSP)
			break;

		bss_info = (u8 *)tlv;
		scan_rsp_tlv = (struct mwifiex_ie_types_bss_scan_rsp *)tlv;
		tlv = (struct mwifiex_ie_types_data *)(tlv->data + len);
		bytes_left_for_tlv -=
				(len + sizeof(struct mwifiex_ie_types_header));

		while (bytes_left_for_tlv >=
		       sizeof(struct mwifiex_ie_types_header) &&
		       le16_to_cpu(tlv->header.type) != TLV_TYPE_BSS_SCAN_RSP) {
			type = le16_to_cpu(tlv->header.type);
			len = le16_to_cpu(tlv->header.len);
			if (bytes_left_for_tlv <
			    sizeof(struct mwifiex_ie_types_header) + len) {
				mwifiex_dbg(adapter, ERROR,
					    "EXT_SCAN: Error in processing TLV,\t"
					    "bytes left < TLV length\n");
				scan_rsp_tlv = NULL;
				bytes_left_for_tlv = 0;
				continue;
			}
			switch (type) {
			case TLV_TYPE_BSS_SCAN_INFO:
				scan_info_tlv =
				  (struct mwifiex_ie_types_bss_scan_info *)tlv;
				if (len !=
				 sizeof(struct mwifiex_ie_types_bss_scan_info) -
				 sizeof(struct mwifiex_ie_types_header)) {
					bytes_left_for_tlv = 0;
					continue;
				}
				break;
			default:
				break;
			}
			tlv = (struct mwifiex_ie_types_data *)(tlv->data + len);
			bytes_left -=
				(len + sizeof(struct mwifiex_ie_types_header));
			bytes_left_for_tlv -=
				(len + sizeof(struct mwifiex_ie_types_header));
		}

		if (!scan_rsp_tlv)
			break;

		/* Advance pointer to the beacon buffer length and
		 * update the bytes count so that the function
		 * wlan_interpret_bss_desc_with_ie() can handle the
		 * scan buffer withut any change
		 */
		bss_info += sizeof(u16);
		bytes_left -= sizeof(u16);

		if (scan_info_tlv) {
			rssi = (s32)(s16)(le16_to_cpu(scan_info_tlv->rssi));
			rssi *= 100;           /* Convert dBm to mBm */
			mwifiex_dbg(adapter, INFO,
				    "info: InterpretIE: RSSI=%d\n", rssi);
			fw_tsf = le64_to_cpu(scan_info_tlv->tsf);
			radio_type = &scan_info_tlv->radio_type;
		} else {
			radio_type = NULL;
		}
		ret = mwifiex_parse_single_response_buf(priv, &bss_info,
							&bytes_left, fw_tsf,
							radio_type, true, rssi);
		if (ret)
			goto check_next_scan;
	}

check_next_scan:
	if (!event_scan->more_event)
		mwifiex_check_next_scan_command(priv);

	return ret;
}

/*
 * This function prepares command for background scan query.
 *
 * Preparation includes -
 *      - Setting command ID and proper size
 *      - Setting background scan flush parameter
 *      - Ensuring correct endian-ness
 */
int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd)
{
	struct host_cmd_ds_802_11_bg_scan_query *bg_query =
		&cmd->params.bg_scan_query;

	cmd->command = cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY);
	cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query)
				+ S_DS_GEN);

	bg_query->flush = 1;

	return 0;
}

/*
 * This function inserts scan command node to the scan pending queue.
 */
void
mwifiex_queue_scan_cmd(struct mwifiex_private *priv,
		       struct cmd_ctrl_node *cmd_node)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	unsigned long flags;

	cmd_node->wait_q_enabled = true;
	cmd_node->condition = &adapter->scan_wait_q_woken;
	spin_lock_irqsave(&adapter->scan_pending_q_lock, flags);
	list_add_tail(&cmd_node->list, &adapter->scan_pending_q);
	spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags);
}

/*
 * This function sends a scan command for all available channels to the
 * firmware, filtered on a specific SSID.
 */
static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
				      struct cfg80211_ssid *req_ssid)
{
	struct mwifiex_adapter *adapter = priv->adapter;
	int ret;
	struct mwifiex_user_scan_cfg *scan_cfg;

	if (adapter->scan_processing) {
		mwifiex_dbg(adapter, WARN,
			    "cmd: Scan already in process...\n");
		return -EBUSY;
	}

	if (priv->scan_block) {
		mwifiex_dbg(adapter, WARN,
			    "cmd: Scan is blocked during association...\n");
		return -EBUSY;
	}

	scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
	if (!scan_cfg)
		return -ENOMEM;

	ether_addr_copy(scan_cfg->random_mac, priv->random_mac);
	scan_cfg->ssid_list = req_ssid;
	scan_cfg->num_ssids = 1;

	ret = mwifiex_scan_networks(priv, scan_cfg);

	kfree(scan_cfg);
	return ret;
}

/*
 * Sends IOCTL request to start a scan.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 *
 * Scan command can be issued for both normal scan and specific SSID
 * scan, depending upon whether an SSID is provided or not.
 */
int mwifiex_request_scan(struct mwifiex_private *priv,
			 struct cfg80211_ssid *req_ssid)
{
	int ret;

	if (down_interruptible(&priv->async_sem)) {
		mwifiex_dbg(priv->adapter, ERROR,
			    "%s: acquire semaphore fail\n",
			    __func__);
		return -1;
	}

	priv->adapter->scan_wait_q_woken = false;

	if (req_ssid && req_ssid->ssid_len != 0)
		/* Specific SSID scan */
		ret = mwifiex_scan_specific_ssid(priv, req_ssid);
	else
		/* Normal scan */
		ret = mwifiex_scan_networks(priv, NULL);

	up(&priv->async_sem);

	return ret;
}

/*
 * This function appends the vendor specific IE TLV to a buffer.
 */
int
mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv,
			    u16 vsie_mask, u8 **buffer)
{
	int id, ret_len = 0;
	struct mwifiex_ie_types_vendor_param_set *vs_param_set;

	if (!buffer)
		return 0;
	if (!(*buffer))
		return 0;

	/*
	 * Traverse through the saved vendor specific IE array and append
	 * the selected(scan/assoc/adhoc) IE as TLV to the command
	 */
	for (id = 0; id < MWIFIEX_MAX_VSIE_NUM; id++) {
		if (priv->vs_ie[id].mask & vsie_mask) {
			vs_param_set =
				(struct mwifiex_ie_types_vendor_param_set *)
				*buffer;
			vs_param_set->header.type =
				cpu_to_le16(TLV_TYPE_PASSTHROUGH);
			vs_param_set->header.len =
				cpu_to_le16((((u16) priv->vs_ie[id].ie[1])
				& 0x00FF) + 2);
			memcpy(vs_param_set->ie, priv->vs_ie[id].ie,
			       le16_to_cpu(vs_param_set->header.len));
			*buffer += le16_to_cpu(vs_param_set->header.len) +
				   sizeof(struct mwifiex_ie_types_header);
			ret_len += le16_to_cpu(vs_param_set->header.len) +
				   sizeof(struct mwifiex_ie_types_header);
		}
	}
	return ret_len;
}

/*
 * This function saves a beacon buffer of the current BSS descriptor.
 *
 * The current beacon buffer is saved so that it can be restored in the
 * following cases that makes the beacon buffer not to contain the current
 * ssid's beacon buffer.
 *      - The current ssid was not found somehow in the last scan.
 *      - The current ssid was the last entry of the scan table and overloaded.
 */
void
mwifiex_save_curr_bcn(struct mwifiex_private *priv)
{
	struct mwifiex_bssdescriptor *curr_bss =
		&priv->curr_bss_params.bss_descriptor;

	if (!curr_bss->beacon_buf_size)
		return;

	/* allocate beacon buffer at 1st time; or if it's size has changed */
	if (!priv->curr_bcn_buf ||
	    priv->curr_bcn_size != curr_bss->beacon_buf_size) {
		priv->curr_bcn_size = curr_bss->beacon_buf_size;

		kfree(priv->curr_bcn_buf);
		priv->curr_bcn_buf = kmalloc(curr_bss->beacon_buf_size,
					     GFP_ATOMIC);
		if (!priv->curr_bcn_buf)
			return;
	}

	memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf,
	       curr_bss->beacon_buf_size);
	mwifiex_dbg(priv->adapter, INFO,
		    "info: current beacon saved %d\n",
		    priv->curr_bcn_size);

	curr_bss->beacon_buf = priv->curr_bcn_buf;

	/* adjust the pointers in the current BSS descriptor */
	if (curr_bss->bcn_wpa_ie)
		curr_bss->bcn_wpa_ie =
			(struct ieee_types_vendor_specific *)
			(curr_bss->beacon_buf +
			 curr_bss->wpa_offset);

	if (curr_bss->bcn_rsn_ie)
		curr_bss->bcn_rsn_ie = (struct ieee_types_generic *)
			(curr_bss->beacon_buf +
			 curr_bss->rsn_offset);

	if (curr_bss->bcn_ht_cap)
		curr_bss->bcn_ht_cap = (struct ieee80211_ht_cap *)
			(curr_bss->beacon_buf +
			 curr_bss->ht_cap_offset);

	if (curr_bss->bcn_ht_oper)
		curr_bss->bcn_ht_oper = (struct ieee80211_ht_operation *)
			(curr_bss->beacon_buf +
			 curr_bss->ht_info_offset);

	if (curr_bss->bcn_vht_cap)
		curr_bss->bcn_vht_cap = (void *)(curr_bss->beacon_buf +
						 curr_bss->vht_cap_offset);

	if (curr_bss->bcn_vht_oper)
		curr_bss->bcn_vht_oper = (void *)(curr_bss->beacon_buf +
						  curr_bss->vht_info_offset);

	if (curr_bss->bcn_bss_co_2040)
		curr_bss->bcn_bss_co_2040 =
			(curr_bss->beacon_buf + curr_bss->bss_co_2040_offset);

	if (curr_bss->bcn_ext_cap)
		curr_bss->bcn_ext_cap = curr_bss->beacon_buf +
			curr_bss->ext_cap_offset;

	if (curr_bss->oper_mode)
		curr_bss->oper_mode = (void *)(curr_bss->beacon_buf +
					       curr_bss->oper_mode_offset);
}

/*
 * This function frees the current BSS descriptor beacon buffer.
 */
void
mwifiex_free_curr_bcn(struct mwifiex_private *priv)
{
	kfree(priv->curr_bcn_buf);
	priv->curr_bcn_buf = NULL;
}