Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Renesas R-Car GPIO Support |
| 3 | * |
| 4 | * Copyright (C) 2013 Magnus Damm |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/gpio.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/io.h> |
| 21 | #include <linux/ioport.h> |
| 22 | #include <linux/irq.h> |
| 23 | #include <linux/irqdomain.h> |
| 24 | #include <linux/module.h> |
Sachin Kamat | bd0bf46 | 2013-10-16 15:35:02 +0530 | [diff] [blame] | 25 | #include <linux/of.h> |
Laurent Pinchart | dc3465a | 2013-03-10 03:27:00 +0100 | [diff] [blame] | 26 | #include <linux/pinctrl/consumer.h> |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 27 | #include <linux/platform_data/gpio-rcar.h> |
| 28 | #include <linux/platform_device.h> |
| 29 | #include <linux/spinlock.h> |
| 30 | #include <linux/slab.h> |
| 31 | |
| 32 | struct gpio_rcar_priv { |
| 33 | void __iomem *base; |
| 34 | spinlock_t lock; |
| 35 | struct gpio_rcar_config config; |
| 36 | struct platform_device *pdev; |
| 37 | struct gpio_chip gpio_chip; |
| 38 | struct irq_chip irq_chip; |
| 39 | struct irq_domain *irq_domain; |
| 40 | }; |
| 41 | |
| 42 | #define IOINTSEL 0x00 |
| 43 | #define INOUTSEL 0x04 |
| 44 | #define OUTDT 0x08 |
| 45 | #define INDT 0x0c |
| 46 | #define INTDT 0x10 |
| 47 | #define INTCLR 0x14 |
| 48 | #define INTMSK 0x18 |
| 49 | #define MSKCLR 0x1c |
| 50 | #define POSNEG 0x20 |
| 51 | #define EDGLEVEL 0x24 |
| 52 | #define FILONOFF 0x28 |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 53 | #define BOTHEDGE 0x4c |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 54 | |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 55 | #define RCAR_MAX_GPIO_PER_BANK 32 |
| 56 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 57 | static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) |
| 58 | { |
| 59 | return ioread32(p->base + offs); |
| 60 | } |
| 61 | |
| 62 | static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, |
| 63 | u32 value) |
| 64 | { |
| 65 | iowrite32(value, p->base + offs); |
| 66 | } |
| 67 | |
| 68 | static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, |
| 69 | int bit, bool value) |
| 70 | { |
| 71 | u32 tmp = gpio_rcar_read(p, offs); |
| 72 | |
| 73 | if (value) |
| 74 | tmp |= BIT(bit); |
| 75 | else |
| 76 | tmp &= ~BIT(bit); |
| 77 | |
| 78 | gpio_rcar_write(p, offs, tmp); |
| 79 | } |
| 80 | |
| 81 | static void gpio_rcar_irq_disable(struct irq_data *d) |
| 82 | { |
| 83 | struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| 84 | |
| 85 | gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); |
| 86 | } |
| 87 | |
| 88 | static void gpio_rcar_irq_enable(struct irq_data *d) |
| 89 | { |
| 90 | struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| 91 | |
| 92 | gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); |
| 93 | } |
| 94 | |
| 95 | static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, |
| 96 | unsigned int hwirq, |
| 97 | bool active_high_rising_edge, |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 98 | bool level_trigger, |
| 99 | bool both) |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 100 | { |
| 101 | unsigned long flags; |
| 102 | |
| 103 | /* follow steps in the GPIO documentation for |
| 104 | * "Setting Edge-Sensitive Interrupt Input Mode" and |
| 105 | * "Setting Level-Sensitive Interrupt Input Mode" |
| 106 | */ |
| 107 | |
| 108 | spin_lock_irqsave(&p->lock, flags); |
| 109 | |
| 110 | /* Configure postive or negative logic in POSNEG */ |
| 111 | gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); |
| 112 | |
| 113 | /* Configure edge or level trigger in EDGLEVEL */ |
| 114 | gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); |
| 115 | |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 116 | /* Select one edge or both edges in BOTHEDGE */ |
| 117 | if (p->config.has_both_edge_trigger) |
| 118 | gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); |
| 119 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 120 | /* Select "Interrupt Input Mode" in IOINTSEL */ |
| 121 | gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); |
| 122 | |
| 123 | /* Write INTCLR in case of edge trigger */ |
| 124 | if (!level_trigger) |
| 125 | gpio_rcar_write(p, INTCLR, BIT(hwirq)); |
| 126 | |
| 127 | spin_unlock_irqrestore(&p->lock, flags); |
| 128 | } |
| 129 | |
| 130 | static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) |
| 131 | { |
| 132 | struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); |
| 133 | unsigned int hwirq = irqd_to_hwirq(d); |
| 134 | |
| 135 | dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); |
| 136 | |
| 137 | switch (type & IRQ_TYPE_SENSE_MASK) { |
| 138 | case IRQ_TYPE_LEVEL_HIGH: |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 139 | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, |
| 140 | false); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 141 | break; |
| 142 | case IRQ_TYPE_LEVEL_LOW: |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 143 | gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, |
| 144 | false); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 145 | break; |
| 146 | case IRQ_TYPE_EDGE_RISING: |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 147 | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, |
| 148 | false); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 149 | break; |
| 150 | case IRQ_TYPE_EDGE_FALLING: |
Simon Horman | 7e1092b | 2013-05-24 18:47:24 +0900 | [diff] [blame] | 151 | gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, |
| 152 | false); |
| 153 | break; |
| 154 | case IRQ_TYPE_EDGE_BOTH: |
| 155 | if (!p->config.has_both_edge_trigger) |
| 156 | return -EINVAL; |
| 157 | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, |
| 158 | true); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 159 | break; |
| 160 | default: |
| 161 | return -EINVAL; |
| 162 | } |
| 163 | return 0; |
| 164 | } |
| 165 | |
| 166 | static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) |
| 167 | { |
| 168 | struct gpio_rcar_priv *p = dev_id; |
| 169 | u32 pending; |
| 170 | unsigned int offset, irqs_handled = 0; |
| 171 | |
Valentine Barshak | 8808b64 | 2013-11-29 22:04:09 +0400 | [diff] [blame^] | 172 | while ((pending = gpio_rcar_read(p, INTDT) & |
| 173 | gpio_rcar_read(p, INTMSK))) { |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 174 | offset = __ffs(pending); |
| 175 | gpio_rcar_write(p, INTCLR, BIT(offset)); |
| 176 | generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); |
| 177 | irqs_handled++; |
| 178 | } |
| 179 | |
| 180 | return irqs_handled ? IRQ_HANDLED : IRQ_NONE; |
| 181 | } |
| 182 | |
| 183 | static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip) |
| 184 | { |
| 185 | return container_of(chip, struct gpio_rcar_priv, gpio_chip); |
| 186 | } |
| 187 | |
| 188 | static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, |
| 189 | unsigned int gpio, |
| 190 | bool output) |
| 191 | { |
| 192 | struct gpio_rcar_priv *p = gpio_to_priv(chip); |
| 193 | unsigned long flags; |
| 194 | |
| 195 | /* follow steps in the GPIO documentation for |
| 196 | * "Setting General Output Mode" and |
| 197 | * "Setting General Input Mode" |
| 198 | */ |
| 199 | |
| 200 | spin_lock_irqsave(&p->lock, flags); |
| 201 | |
| 202 | /* Configure postive logic in POSNEG */ |
| 203 | gpio_rcar_modify_bit(p, POSNEG, gpio, false); |
| 204 | |
| 205 | /* Select "General Input/Output Mode" in IOINTSEL */ |
| 206 | gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); |
| 207 | |
| 208 | /* Select Input Mode or Output Mode in INOUTSEL */ |
| 209 | gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); |
| 210 | |
| 211 | spin_unlock_irqrestore(&p->lock, flags); |
| 212 | } |
| 213 | |
Laurent Pinchart | dc3465a | 2013-03-10 03:27:00 +0100 | [diff] [blame] | 214 | static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) |
| 215 | { |
| 216 | return pinctrl_request_gpio(chip->base + offset); |
| 217 | } |
| 218 | |
| 219 | static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) |
| 220 | { |
| 221 | pinctrl_free_gpio(chip->base + offset); |
| 222 | |
| 223 | /* Set the GPIO as an input to ensure that the next GPIO request won't |
| 224 | * drive the GPIO pin as an output. |
| 225 | */ |
| 226 | gpio_rcar_config_general_input_output_mode(chip, offset, false); |
| 227 | } |
| 228 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 229 | static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) |
| 230 | { |
| 231 | gpio_rcar_config_general_input_output_mode(chip, offset, false); |
| 232 | return 0; |
| 233 | } |
| 234 | |
| 235 | static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) |
| 236 | { |
Magnus Damm | ae9550f | 2013-06-17 08:41:52 +0900 | [diff] [blame] | 237 | u32 bit = BIT(offset); |
| 238 | |
| 239 | /* testing on r8a7790 shows that INDT does not show correct pin state |
| 240 | * when configured as output, so use OUTDT in case of output pins */ |
| 241 | if (gpio_rcar_read(gpio_to_priv(chip), INOUTSEL) & bit) |
| 242 | return (int)(gpio_rcar_read(gpio_to_priv(chip), OUTDT) & bit); |
| 243 | else |
| 244 | return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & bit); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 245 | } |
| 246 | |
| 247 | static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) |
| 248 | { |
| 249 | struct gpio_rcar_priv *p = gpio_to_priv(chip); |
| 250 | unsigned long flags; |
| 251 | |
| 252 | spin_lock_irqsave(&p->lock, flags); |
| 253 | gpio_rcar_modify_bit(p, OUTDT, offset, value); |
| 254 | spin_unlock_irqrestore(&p->lock, flags); |
| 255 | } |
| 256 | |
| 257 | static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, |
| 258 | int value) |
| 259 | { |
| 260 | /* write GPIO value to output before selecting output mode of pin */ |
| 261 | gpio_rcar_set(chip, offset, value); |
| 262 | gpio_rcar_config_general_input_output_mode(chip, offset, true); |
| 263 | return 0; |
| 264 | } |
| 265 | |
| 266 | static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset) |
| 267 | { |
| 268 | return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset); |
| 269 | } |
| 270 | |
Linus Walleij | c0d6c1a | 2013-10-11 19:43:39 +0200 | [diff] [blame] | 271 | static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int irq, |
| 272 | irq_hw_number_t hwirq) |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 273 | { |
| 274 | struct gpio_rcar_priv *p = h->host_data; |
| 275 | |
Linus Walleij | c0d6c1a | 2013-10-11 19:43:39 +0200 | [diff] [blame] | 276 | dev_dbg(&p->pdev->dev, "map hw irq = %d, irq = %d\n", (int)hwirq, irq); |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 277 | |
Linus Walleij | c0d6c1a | 2013-10-11 19:43:39 +0200 | [diff] [blame] | 278 | irq_set_chip_data(irq, h->host_data); |
| 279 | irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq); |
| 280 | set_irq_flags(irq, IRQF_VALID); /* kill me now */ |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 281 | return 0; |
| 282 | } |
| 283 | |
| 284 | static struct irq_domain_ops gpio_rcar_irq_domain_ops = { |
| 285 | .map = gpio_rcar_irq_domain_map, |
| 286 | }; |
| 287 | |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 288 | static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) |
| 289 | { |
Jingoo Han | e56aee1 | 2013-07-30 17:08:05 +0900 | [diff] [blame] | 290 | struct gpio_rcar_config *pdata = dev_get_platdata(&p->pdev->dev); |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 291 | struct device_node *np = p->pdev->dev.of_node; |
| 292 | struct of_phandle_args args; |
| 293 | int ret; |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 294 | |
Laurent Pinchart | e305062 | 2013-06-18 12:29:49 +0200 | [diff] [blame] | 295 | if (pdata) { |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 296 | p->config = *pdata; |
Laurent Pinchart | e305062 | 2013-06-18 12:29:49 +0200 | [diff] [blame] | 297 | } else if (IS_ENABLED(CONFIG_OF) && np) { |
Laurent Pinchart | 01eb2d1 | 2013-09-11 15:51:01 +0200 | [diff] [blame] | 298 | ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, |
| 299 | &args); |
| 300 | p->config.number_of_pins = ret == 0 ? args.args[2] |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 301 | : RCAR_MAX_GPIO_PER_BANK; |
| 302 | p->config.gpio_base = -1; |
| 303 | } |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 304 | |
| 305 | if (p->config.number_of_pins == 0 || |
| 306 | p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) { |
| 307 | dev_warn(&p->pdev->dev, |
| 308 | "Invalid number of gpio lines %u, using %u\n", |
| 309 | p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK); |
| 310 | p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK; |
| 311 | } |
| 312 | } |
| 313 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 314 | static int gpio_rcar_probe(struct platform_device *pdev) |
| 315 | { |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 316 | struct gpio_rcar_priv *p; |
| 317 | struct resource *io, *irq; |
| 318 | struct gpio_chip *gpio_chip; |
| 319 | struct irq_chip *irq_chip; |
| 320 | const char *name = dev_name(&pdev->dev); |
| 321 | int ret; |
| 322 | |
| 323 | p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); |
| 324 | if (!p) { |
| 325 | dev_err(&pdev->dev, "failed to allocate driver data\n"); |
| 326 | ret = -ENOMEM; |
| 327 | goto err0; |
| 328 | } |
| 329 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 330 | p->pdev = pdev; |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 331 | spin_lock_init(&p->lock); |
| 332 | |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 333 | /* Get device configuration from DT node or platform data. */ |
| 334 | gpio_rcar_parse_pdata(p); |
| 335 | |
| 336 | platform_set_drvdata(pdev, p); |
| 337 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 338 | io = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 339 | irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| 340 | |
| 341 | if (!io || !irq) { |
| 342 | dev_err(&pdev->dev, "missing IRQ or IOMEM\n"); |
| 343 | ret = -EINVAL; |
| 344 | goto err0; |
| 345 | } |
| 346 | |
| 347 | p->base = devm_ioremap_nocache(&pdev->dev, io->start, |
| 348 | resource_size(io)); |
| 349 | if (!p->base) { |
| 350 | dev_err(&pdev->dev, "failed to remap I/O memory\n"); |
| 351 | ret = -ENXIO; |
| 352 | goto err0; |
| 353 | } |
| 354 | |
| 355 | gpio_chip = &p->gpio_chip; |
Laurent Pinchart | dc3465a | 2013-03-10 03:27:00 +0100 | [diff] [blame] | 356 | gpio_chip->request = gpio_rcar_request; |
| 357 | gpio_chip->free = gpio_rcar_free; |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 358 | gpio_chip->direction_input = gpio_rcar_direction_input; |
| 359 | gpio_chip->get = gpio_rcar_get; |
| 360 | gpio_chip->direction_output = gpio_rcar_direction_output; |
| 361 | gpio_chip->set = gpio_rcar_set; |
| 362 | gpio_chip->to_irq = gpio_rcar_to_irq; |
| 363 | gpio_chip->label = name; |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 364 | gpio_chip->dev = &pdev->dev; |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 365 | gpio_chip->owner = THIS_MODULE; |
| 366 | gpio_chip->base = p->config.gpio_base; |
| 367 | gpio_chip->ngpio = p->config.number_of_pins; |
| 368 | |
| 369 | irq_chip = &p->irq_chip; |
| 370 | irq_chip->name = name; |
| 371 | irq_chip->irq_mask = gpio_rcar_irq_disable; |
| 372 | irq_chip->irq_unmask = gpio_rcar_irq_enable; |
| 373 | irq_chip->irq_enable = gpio_rcar_irq_enable; |
| 374 | irq_chip->irq_disable = gpio_rcar_irq_disable; |
| 375 | irq_chip->irq_set_type = gpio_rcar_irq_set_type; |
| 376 | irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED; |
| 377 | |
| 378 | p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, |
| 379 | p->config.number_of_pins, |
| 380 | p->config.irq_base, |
| 381 | &gpio_rcar_irq_domain_ops, p); |
| 382 | if (!p->irq_domain) { |
| 383 | ret = -ENXIO; |
| 384 | dev_err(&pdev->dev, "cannot initialize irq domain\n"); |
Dan Carpenter | 0c8aab8 | 2013-11-07 10:56:51 +0300 | [diff] [blame] | 385 | goto err0; |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 386 | } |
| 387 | |
| 388 | if (devm_request_irq(&pdev->dev, irq->start, |
Kuninori Morimoto | c234962 | 2013-04-17 23:40:57 -0700 | [diff] [blame] | 389 | gpio_rcar_irq_handler, IRQF_SHARED, name, p)) { |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 390 | dev_err(&pdev->dev, "failed to request IRQ\n"); |
| 391 | ret = -ENOENT; |
| 392 | goto err1; |
| 393 | } |
| 394 | |
| 395 | ret = gpiochip_add(gpio_chip); |
| 396 | if (ret) { |
| 397 | dev_err(&pdev->dev, "failed to add GPIO controller\n"); |
| 398 | goto err1; |
| 399 | } |
| 400 | |
| 401 | dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins); |
| 402 | |
| 403 | /* warn in case of mismatch if irq base is specified */ |
| 404 | if (p->config.irq_base) { |
| 405 | ret = irq_find_mapping(p->irq_domain, 0); |
| 406 | if (p->config.irq_base != ret) |
| 407 | dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n", |
| 408 | p->config.irq_base, ret); |
| 409 | } |
| 410 | |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 411 | if (p->config.pctl_name) { |
| 412 | ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, |
| 413 | gpio_chip->base, gpio_chip->ngpio); |
| 414 | if (ret < 0) |
| 415 | dev_warn(&pdev->dev, "failed to add pin range\n"); |
| 416 | } |
Laurent Pinchart | dc3465a | 2013-03-10 03:27:00 +0100 | [diff] [blame] | 417 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 418 | return 0; |
| 419 | |
| 420 | err1: |
| 421 | irq_domain_remove(p->irq_domain); |
| 422 | err0: |
| 423 | return ret; |
| 424 | } |
| 425 | |
| 426 | static int gpio_rcar_remove(struct platform_device *pdev) |
| 427 | { |
| 428 | struct gpio_rcar_priv *p = platform_get_drvdata(pdev); |
| 429 | int ret; |
| 430 | |
| 431 | ret = gpiochip_remove(&p->gpio_chip); |
| 432 | if (ret) |
| 433 | return ret; |
| 434 | |
| 435 | irq_domain_remove(p->irq_domain); |
| 436 | return 0; |
| 437 | } |
| 438 | |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 439 | #ifdef CONFIG_OF |
| 440 | static const struct of_device_id gpio_rcar_of_table[] = { |
| 441 | { |
| 442 | .compatible = "renesas,gpio-rcar", |
| 443 | }, |
Arnd Bergmann | 30d2266 | 2013-06-17 09:55:50 +0200 | [diff] [blame] | 444 | { }, |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 445 | }; |
| 446 | |
| 447 | MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); |
| 448 | #endif |
| 449 | |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 450 | static struct platform_driver gpio_rcar_device_driver = { |
| 451 | .probe = gpio_rcar_probe, |
| 452 | .remove = gpio_rcar_remove, |
| 453 | .driver = { |
| 454 | .name = "gpio_rcar", |
Laurent Pinchart | 159f8a0 | 2013-05-21 13:40:06 +0200 | [diff] [blame] | 455 | .of_match_table = of_match_ptr(gpio_rcar_of_table), |
Magnus Damm | 119f5e4 | 2013-03-13 20:32:13 +0900 | [diff] [blame] | 456 | } |
| 457 | }; |
| 458 | |
| 459 | module_platform_driver(gpio_rcar_device_driver); |
| 460 | |
| 461 | MODULE_AUTHOR("Magnus Damm"); |
| 462 | MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); |
| 463 | MODULE_LICENSE("GPL v2"); |