Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2005-2011 Atheros Communications Inc. |
| 3 | * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. |
| 4 | * |
| 5 | * Permission to use, copy, modify, and/or distribute this software for any |
| 6 | * purpose with or without fee is hereby granted, provided that the above |
| 7 | * copyright notice and this permission notice appear in all copies. |
| 8 | * |
| 9 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 12 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 14 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 15 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 | */ |
| 17 | |
| 18 | #include "mac.h" |
| 19 | |
| 20 | #include <net/mac80211.h> |
| 21 | #include <linux/etherdevice.h> |
| 22 | |
| 23 | #include "core.h" |
| 24 | #include "debug.h" |
| 25 | #include "wmi.h" |
| 26 | #include "htt.h" |
| 27 | #include "txrx.h" |
| 28 | |
| 29 | /**********/ |
| 30 | /* Crypto */ |
| 31 | /**********/ |
| 32 | |
| 33 | static int ath10k_send_key(struct ath10k_vif *arvif, |
| 34 | struct ieee80211_key_conf *key, |
| 35 | enum set_key_cmd cmd, |
| 36 | const u8 *macaddr) |
| 37 | { |
| 38 | struct wmi_vdev_install_key_arg arg = { |
| 39 | .vdev_id = arvif->vdev_id, |
| 40 | .key_idx = key->keyidx, |
| 41 | .key_len = key->keylen, |
| 42 | .key_data = key->key, |
| 43 | .macaddr = macaddr, |
| 44 | }; |
| 45 | |
| 46 | if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) |
| 47 | arg.key_flags = WMI_KEY_PAIRWISE; |
| 48 | else |
| 49 | arg.key_flags = WMI_KEY_GROUP; |
| 50 | |
| 51 | switch (key->cipher) { |
| 52 | case WLAN_CIPHER_SUITE_CCMP: |
| 53 | arg.key_cipher = WMI_CIPHER_AES_CCM; |
| 54 | key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; |
| 55 | break; |
| 56 | case WLAN_CIPHER_SUITE_TKIP: |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 57 | arg.key_cipher = WMI_CIPHER_TKIP; |
| 58 | arg.key_txmic_len = 8; |
| 59 | arg.key_rxmic_len = 8; |
| 60 | break; |
| 61 | case WLAN_CIPHER_SUITE_WEP40: |
| 62 | case WLAN_CIPHER_SUITE_WEP104: |
| 63 | arg.key_cipher = WMI_CIPHER_WEP; |
| 64 | /* AP/IBSS mode requires self-key to be groupwise |
| 65 | * Otherwise pairwise key must be set */ |
| 66 | if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN)) |
| 67 | arg.key_flags = WMI_KEY_PAIRWISE; |
| 68 | break; |
| 69 | default: |
| 70 | ath10k_warn("cipher %d is not supported\n", key->cipher); |
| 71 | return -EOPNOTSUPP; |
| 72 | } |
| 73 | |
| 74 | if (cmd == DISABLE_KEY) { |
| 75 | arg.key_cipher = WMI_CIPHER_NONE; |
| 76 | arg.key_data = NULL; |
| 77 | } |
| 78 | |
| 79 | return ath10k_wmi_vdev_install_key(arvif->ar, &arg); |
| 80 | } |
| 81 | |
| 82 | static int ath10k_install_key(struct ath10k_vif *arvif, |
| 83 | struct ieee80211_key_conf *key, |
| 84 | enum set_key_cmd cmd, |
| 85 | const u8 *macaddr) |
| 86 | { |
| 87 | struct ath10k *ar = arvif->ar; |
| 88 | int ret; |
| 89 | |
| 90 | INIT_COMPLETION(ar->install_key_done); |
| 91 | |
| 92 | ret = ath10k_send_key(arvif, key, cmd, macaddr); |
| 93 | if (ret) |
| 94 | return ret; |
| 95 | |
| 96 | ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ); |
| 97 | if (ret == 0) |
| 98 | return -ETIMEDOUT; |
| 99 | |
| 100 | return 0; |
| 101 | } |
| 102 | |
| 103 | static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, |
| 104 | const u8 *addr) |
| 105 | { |
| 106 | struct ath10k *ar = arvif->ar; |
| 107 | struct ath10k_peer *peer; |
| 108 | int ret; |
| 109 | int i; |
| 110 | |
| 111 | lockdep_assert_held(&ar->conf_mutex); |
| 112 | |
| 113 | spin_lock_bh(&ar->data_lock); |
| 114 | peer = ath10k_peer_find(ar, arvif->vdev_id, addr); |
| 115 | spin_unlock_bh(&ar->data_lock); |
| 116 | |
| 117 | if (!peer) |
| 118 | return -ENOENT; |
| 119 | |
| 120 | for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) { |
| 121 | if (arvif->wep_keys[i] == NULL) |
| 122 | continue; |
| 123 | |
| 124 | ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY, |
| 125 | addr); |
| 126 | if (ret) |
| 127 | return ret; |
| 128 | |
| 129 | peer->keys[i] = arvif->wep_keys[i]; |
| 130 | } |
| 131 | |
| 132 | return 0; |
| 133 | } |
| 134 | |
| 135 | static int ath10k_clear_peer_keys(struct ath10k_vif *arvif, |
| 136 | const u8 *addr) |
| 137 | { |
| 138 | struct ath10k *ar = arvif->ar; |
| 139 | struct ath10k_peer *peer; |
| 140 | int first_errno = 0; |
| 141 | int ret; |
| 142 | int i; |
| 143 | |
| 144 | lockdep_assert_held(&ar->conf_mutex); |
| 145 | |
| 146 | spin_lock_bh(&ar->data_lock); |
| 147 | peer = ath10k_peer_find(ar, arvif->vdev_id, addr); |
| 148 | spin_unlock_bh(&ar->data_lock); |
| 149 | |
| 150 | if (!peer) |
| 151 | return -ENOENT; |
| 152 | |
| 153 | for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { |
| 154 | if (peer->keys[i] == NULL) |
| 155 | continue; |
| 156 | |
| 157 | ret = ath10k_install_key(arvif, peer->keys[i], |
| 158 | DISABLE_KEY, addr); |
| 159 | if (ret && first_errno == 0) |
| 160 | first_errno = ret; |
| 161 | |
| 162 | if (ret) |
| 163 | ath10k_warn("could not remove peer wep key %d (%d)\n", |
| 164 | i, ret); |
| 165 | |
| 166 | peer->keys[i] = NULL; |
| 167 | } |
| 168 | |
| 169 | return first_errno; |
| 170 | } |
| 171 | |
| 172 | static int ath10k_clear_vdev_key(struct ath10k_vif *arvif, |
| 173 | struct ieee80211_key_conf *key) |
| 174 | { |
| 175 | struct ath10k *ar = arvif->ar; |
| 176 | struct ath10k_peer *peer; |
| 177 | u8 addr[ETH_ALEN]; |
| 178 | int first_errno = 0; |
| 179 | int ret; |
| 180 | int i; |
| 181 | |
| 182 | lockdep_assert_held(&ar->conf_mutex); |
| 183 | |
| 184 | for (;;) { |
| 185 | /* since ath10k_install_key we can't hold data_lock all the |
| 186 | * time, so we try to remove the keys incrementally */ |
| 187 | spin_lock_bh(&ar->data_lock); |
| 188 | i = 0; |
| 189 | list_for_each_entry(peer, &ar->peers, list) { |
| 190 | for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { |
| 191 | if (peer->keys[i] == key) { |
| 192 | memcpy(addr, peer->addr, ETH_ALEN); |
| 193 | peer->keys[i] = NULL; |
| 194 | break; |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | if (i < ARRAY_SIZE(peer->keys)) |
| 199 | break; |
| 200 | } |
| 201 | spin_unlock_bh(&ar->data_lock); |
| 202 | |
| 203 | if (i == ARRAY_SIZE(peer->keys)) |
| 204 | break; |
| 205 | |
| 206 | ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr); |
| 207 | if (ret && first_errno == 0) |
| 208 | first_errno = ret; |
| 209 | |
| 210 | if (ret) |
| 211 | ath10k_warn("could not remove key for %pM\n", addr); |
| 212 | } |
| 213 | |
| 214 | return first_errno; |
| 215 | } |
| 216 | |
| 217 | |
| 218 | /*********************/ |
| 219 | /* General utilities */ |
| 220 | /*********************/ |
| 221 | |
| 222 | static inline enum wmi_phy_mode |
| 223 | chan_to_phymode(const struct cfg80211_chan_def *chandef) |
| 224 | { |
| 225 | enum wmi_phy_mode phymode = MODE_UNKNOWN; |
| 226 | |
| 227 | switch (chandef->chan->band) { |
| 228 | case IEEE80211_BAND_2GHZ: |
| 229 | switch (chandef->width) { |
| 230 | case NL80211_CHAN_WIDTH_20_NOHT: |
| 231 | phymode = MODE_11G; |
| 232 | break; |
| 233 | case NL80211_CHAN_WIDTH_20: |
| 234 | phymode = MODE_11NG_HT20; |
| 235 | break; |
| 236 | case NL80211_CHAN_WIDTH_40: |
| 237 | phymode = MODE_11NG_HT40; |
| 238 | break; |
John W. Linville | 0f817ed | 2013-06-27 13:50:09 -0400 | [diff] [blame] | 239 | case NL80211_CHAN_WIDTH_5: |
| 240 | case NL80211_CHAN_WIDTH_10: |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 241 | case NL80211_CHAN_WIDTH_80: |
| 242 | case NL80211_CHAN_WIDTH_80P80: |
| 243 | case NL80211_CHAN_WIDTH_160: |
| 244 | phymode = MODE_UNKNOWN; |
| 245 | break; |
| 246 | } |
| 247 | break; |
| 248 | case IEEE80211_BAND_5GHZ: |
| 249 | switch (chandef->width) { |
| 250 | case NL80211_CHAN_WIDTH_20_NOHT: |
| 251 | phymode = MODE_11A; |
| 252 | break; |
| 253 | case NL80211_CHAN_WIDTH_20: |
| 254 | phymode = MODE_11NA_HT20; |
| 255 | break; |
| 256 | case NL80211_CHAN_WIDTH_40: |
| 257 | phymode = MODE_11NA_HT40; |
| 258 | break; |
| 259 | case NL80211_CHAN_WIDTH_80: |
| 260 | phymode = MODE_11AC_VHT80; |
| 261 | break; |
John W. Linville | 0f817ed | 2013-06-27 13:50:09 -0400 | [diff] [blame] | 262 | case NL80211_CHAN_WIDTH_5: |
| 263 | case NL80211_CHAN_WIDTH_10: |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 264 | case NL80211_CHAN_WIDTH_80P80: |
| 265 | case NL80211_CHAN_WIDTH_160: |
| 266 | phymode = MODE_UNKNOWN; |
| 267 | break; |
| 268 | } |
| 269 | break; |
| 270 | default: |
| 271 | break; |
| 272 | } |
| 273 | |
| 274 | WARN_ON(phymode == MODE_UNKNOWN); |
| 275 | return phymode; |
| 276 | } |
| 277 | |
| 278 | static u8 ath10k_parse_mpdudensity(u8 mpdudensity) |
| 279 | { |
| 280 | /* |
| 281 | * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": |
| 282 | * 0 for no restriction |
| 283 | * 1 for 1/4 us |
| 284 | * 2 for 1/2 us |
| 285 | * 3 for 1 us |
| 286 | * 4 for 2 us |
| 287 | * 5 for 4 us |
| 288 | * 6 for 8 us |
| 289 | * 7 for 16 us |
| 290 | */ |
| 291 | switch (mpdudensity) { |
| 292 | case 0: |
| 293 | return 0; |
| 294 | case 1: |
| 295 | case 2: |
| 296 | case 3: |
| 297 | /* Our lower layer calculations limit our precision to |
| 298 | 1 microsecond */ |
| 299 | return 1; |
| 300 | case 4: |
| 301 | return 2; |
| 302 | case 5: |
| 303 | return 4; |
| 304 | case 6: |
| 305 | return 8; |
| 306 | case 7: |
| 307 | return 16; |
| 308 | default: |
| 309 | return 0; |
| 310 | } |
| 311 | } |
| 312 | |
| 313 | static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr) |
| 314 | { |
| 315 | int ret; |
| 316 | |
| 317 | lockdep_assert_held(&ar->conf_mutex); |
| 318 | |
| 319 | ret = ath10k_wmi_peer_create(ar, vdev_id, addr); |
| 320 | if (ret) |
| 321 | return ret; |
| 322 | |
| 323 | ret = ath10k_wait_for_peer_created(ar, vdev_id, addr); |
| 324 | if (ret) |
| 325 | return ret; |
| 326 | |
| 327 | return 0; |
| 328 | } |
| 329 | |
| 330 | static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr) |
| 331 | { |
| 332 | int ret; |
| 333 | |
| 334 | lockdep_assert_held(&ar->conf_mutex); |
| 335 | |
| 336 | ret = ath10k_wmi_peer_delete(ar, vdev_id, addr); |
| 337 | if (ret) |
| 338 | return ret; |
| 339 | |
| 340 | ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr); |
| 341 | if (ret) |
| 342 | return ret; |
| 343 | |
| 344 | return 0; |
| 345 | } |
| 346 | |
| 347 | static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id) |
| 348 | { |
| 349 | struct ath10k_peer *peer, *tmp; |
| 350 | |
| 351 | lockdep_assert_held(&ar->conf_mutex); |
| 352 | |
| 353 | spin_lock_bh(&ar->data_lock); |
| 354 | list_for_each_entry_safe(peer, tmp, &ar->peers, list) { |
| 355 | if (peer->vdev_id != vdev_id) |
| 356 | continue; |
| 357 | |
| 358 | ath10k_warn("removing stale peer %pM from vdev_id %d\n", |
| 359 | peer->addr, vdev_id); |
| 360 | |
| 361 | list_del(&peer->list); |
| 362 | kfree(peer); |
| 363 | } |
| 364 | spin_unlock_bh(&ar->data_lock); |
| 365 | } |
| 366 | |
| 367 | /************************/ |
| 368 | /* Interface management */ |
| 369 | /************************/ |
| 370 | |
| 371 | static inline int ath10k_vdev_setup_sync(struct ath10k *ar) |
| 372 | { |
| 373 | int ret; |
| 374 | |
| 375 | ret = wait_for_completion_timeout(&ar->vdev_setup_done, |
| 376 | ATH10K_VDEV_SETUP_TIMEOUT_HZ); |
| 377 | if (ret == 0) |
| 378 | return -ETIMEDOUT; |
| 379 | |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | static int ath10k_vdev_start(struct ath10k_vif *arvif) |
| 384 | { |
| 385 | struct ath10k *ar = arvif->ar; |
| 386 | struct ieee80211_conf *conf = &ar->hw->conf; |
| 387 | struct ieee80211_channel *channel = conf->chandef.chan; |
| 388 | struct wmi_vdev_start_request_arg arg = {}; |
| 389 | int ret = 0; |
| 390 | |
| 391 | lockdep_assert_held(&ar->conf_mutex); |
| 392 | |
| 393 | INIT_COMPLETION(ar->vdev_setup_done); |
| 394 | |
| 395 | arg.vdev_id = arvif->vdev_id; |
| 396 | arg.dtim_period = arvif->dtim_period; |
| 397 | arg.bcn_intval = arvif->beacon_interval; |
| 398 | |
| 399 | arg.channel.freq = channel->center_freq; |
| 400 | |
| 401 | arg.channel.band_center_freq1 = conf->chandef.center_freq1; |
| 402 | |
| 403 | arg.channel.mode = chan_to_phymode(&conf->chandef); |
| 404 | |
| 405 | arg.channel.min_power = channel->max_power * 3; |
| 406 | arg.channel.max_power = channel->max_power * 4; |
| 407 | arg.channel.max_reg_power = channel->max_reg_power * 4; |
| 408 | arg.channel.max_antenna_gain = channel->max_antenna_gain; |
| 409 | |
| 410 | if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| 411 | arg.ssid = arvif->u.ap.ssid; |
| 412 | arg.ssid_len = arvif->u.ap.ssid_len; |
| 413 | arg.hidden_ssid = arvif->u.ap.hidden_ssid; |
| 414 | } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { |
| 415 | arg.ssid = arvif->vif->bss_conf.ssid; |
| 416 | arg.ssid_len = arvif->vif->bss_conf.ssid_len; |
| 417 | } |
| 418 | |
| 419 | ret = ath10k_wmi_vdev_start(ar, &arg); |
| 420 | if (ret) { |
| 421 | ath10k_warn("WMI vdev start failed: ret %d\n", ret); |
| 422 | return ret; |
| 423 | } |
| 424 | |
| 425 | ret = ath10k_vdev_setup_sync(ar); |
| 426 | if (ret) { |
| 427 | ath10k_warn("vdev setup failed %d\n", ret); |
| 428 | return ret; |
| 429 | } |
| 430 | |
| 431 | return ret; |
| 432 | } |
| 433 | |
| 434 | static int ath10k_vdev_stop(struct ath10k_vif *arvif) |
| 435 | { |
| 436 | struct ath10k *ar = arvif->ar; |
| 437 | int ret; |
| 438 | |
| 439 | lockdep_assert_held(&ar->conf_mutex); |
| 440 | |
| 441 | INIT_COMPLETION(ar->vdev_setup_done); |
| 442 | |
| 443 | ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id); |
| 444 | if (ret) { |
| 445 | ath10k_warn("WMI vdev stop failed: ret %d\n", ret); |
| 446 | return ret; |
| 447 | } |
| 448 | |
| 449 | ret = ath10k_vdev_setup_sync(ar); |
| 450 | if (ret) { |
| 451 | ath10k_warn("vdev setup failed %d\n", ret); |
| 452 | return ret; |
| 453 | } |
| 454 | |
| 455 | return ret; |
| 456 | } |
| 457 | |
| 458 | static int ath10k_monitor_start(struct ath10k *ar, int vdev_id) |
| 459 | { |
| 460 | struct ieee80211_channel *channel = ar->hw->conf.chandef.chan; |
| 461 | struct wmi_vdev_start_request_arg arg = {}; |
| 462 | enum nl80211_channel_type type; |
| 463 | int ret = 0; |
| 464 | |
| 465 | lockdep_assert_held(&ar->conf_mutex); |
| 466 | |
| 467 | type = cfg80211_get_chandef_type(&ar->hw->conf.chandef); |
| 468 | |
| 469 | arg.vdev_id = vdev_id; |
| 470 | arg.channel.freq = channel->center_freq; |
| 471 | arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1; |
| 472 | |
| 473 | /* TODO setup this dynamically, what in case we |
| 474 | don't have any vifs? */ |
| 475 | arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef); |
| 476 | |
| 477 | arg.channel.min_power = channel->max_power * 3; |
| 478 | arg.channel.max_power = channel->max_power * 4; |
| 479 | arg.channel.max_reg_power = channel->max_reg_power * 4; |
| 480 | arg.channel.max_antenna_gain = channel->max_antenna_gain; |
| 481 | |
| 482 | ret = ath10k_wmi_vdev_start(ar, &arg); |
| 483 | if (ret) { |
| 484 | ath10k_warn("Monitor vdev start failed: ret %d\n", ret); |
| 485 | return ret; |
| 486 | } |
| 487 | |
| 488 | ret = ath10k_vdev_setup_sync(ar); |
| 489 | if (ret) { |
| 490 | ath10k_warn("Monitor vdev setup failed %d\n", ret); |
| 491 | return ret; |
| 492 | } |
| 493 | |
| 494 | ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr); |
| 495 | if (ret) { |
| 496 | ath10k_warn("Monitor vdev up failed: %d\n", ret); |
| 497 | goto vdev_stop; |
| 498 | } |
| 499 | |
| 500 | ar->monitor_vdev_id = vdev_id; |
| 501 | ar->monitor_enabled = true; |
| 502 | |
| 503 | return 0; |
| 504 | |
| 505 | vdev_stop: |
| 506 | ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); |
| 507 | if (ret) |
| 508 | ath10k_warn("Monitor vdev stop failed: %d\n", ret); |
| 509 | |
| 510 | return ret; |
| 511 | } |
| 512 | |
| 513 | static int ath10k_monitor_stop(struct ath10k *ar) |
| 514 | { |
| 515 | int ret = 0; |
| 516 | |
| 517 | lockdep_assert_held(&ar->conf_mutex); |
| 518 | |
| 519 | /* For some reasons, ath10k_wmi_vdev_down() here couse |
| 520 | * often ath10k_wmi_vdev_stop() to fail. Next we could |
| 521 | * not run monitor vdev and driver reload |
| 522 | * required. Don't see such problems we skip |
| 523 | * ath10k_wmi_vdev_down() here. |
| 524 | */ |
| 525 | |
| 526 | ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); |
| 527 | if (ret) |
| 528 | ath10k_warn("Monitor vdev stop failed: %d\n", ret); |
| 529 | |
| 530 | ret = ath10k_vdev_setup_sync(ar); |
| 531 | if (ret) |
| 532 | ath10k_warn("Monitor_down sync failed: %d\n", ret); |
| 533 | |
| 534 | ar->monitor_enabled = false; |
| 535 | return ret; |
| 536 | } |
| 537 | |
| 538 | static int ath10k_monitor_create(struct ath10k *ar) |
| 539 | { |
| 540 | int bit, ret = 0; |
| 541 | |
| 542 | lockdep_assert_held(&ar->conf_mutex); |
| 543 | |
| 544 | if (ar->monitor_present) { |
| 545 | ath10k_warn("Monitor mode already enabled\n"); |
| 546 | return 0; |
| 547 | } |
| 548 | |
| 549 | bit = ffs(ar->free_vdev_map); |
| 550 | if (bit == 0) { |
| 551 | ath10k_warn("No free VDEV slots\n"); |
| 552 | return -ENOMEM; |
| 553 | } |
| 554 | |
| 555 | ar->monitor_vdev_id = bit - 1; |
| 556 | ar->free_vdev_map &= ~(1 << ar->monitor_vdev_id); |
| 557 | |
| 558 | ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id, |
| 559 | WMI_VDEV_TYPE_MONITOR, |
| 560 | 0, ar->mac_addr); |
| 561 | if (ret) { |
| 562 | ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret); |
| 563 | goto vdev_fail; |
| 564 | } |
| 565 | |
| 566 | ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n", |
| 567 | ar->monitor_vdev_id); |
| 568 | |
| 569 | ar->monitor_present = true; |
| 570 | return 0; |
| 571 | |
| 572 | vdev_fail: |
| 573 | /* |
| 574 | * Restore the ID to the global map. |
| 575 | */ |
| 576 | ar->free_vdev_map |= 1 << (ar->monitor_vdev_id); |
| 577 | return ret; |
| 578 | } |
| 579 | |
| 580 | static int ath10k_monitor_destroy(struct ath10k *ar) |
| 581 | { |
| 582 | int ret = 0; |
| 583 | |
| 584 | lockdep_assert_held(&ar->conf_mutex); |
| 585 | |
| 586 | if (!ar->monitor_present) |
| 587 | return 0; |
| 588 | |
| 589 | ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id); |
| 590 | if (ret) { |
| 591 | ath10k_warn("WMI vdev monitor delete failed: %d\n", ret); |
| 592 | return ret; |
| 593 | } |
| 594 | |
| 595 | ar->free_vdev_map |= 1 << (ar->monitor_vdev_id); |
| 596 | ar->monitor_present = false; |
| 597 | |
| 598 | ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n", |
| 599 | ar->monitor_vdev_id); |
| 600 | return ret; |
| 601 | } |
| 602 | |
| 603 | static void ath10k_control_beaconing(struct ath10k_vif *arvif, |
| 604 | struct ieee80211_bss_conf *info) |
| 605 | { |
| 606 | int ret = 0; |
| 607 | |
| 608 | if (!info->enable_beacon) { |
| 609 | ath10k_vdev_stop(arvif); |
| 610 | return; |
| 611 | } |
| 612 | |
| 613 | arvif->tx_seq_no = 0x1000; |
| 614 | |
| 615 | ret = ath10k_vdev_start(arvif); |
| 616 | if (ret) |
| 617 | return; |
| 618 | |
| 619 | ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid); |
| 620 | if (ret) { |
| 621 | ath10k_warn("Failed to bring up VDEV: %d\n", |
| 622 | arvif->vdev_id); |
| 623 | return; |
| 624 | } |
| 625 | ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id); |
| 626 | } |
| 627 | |
| 628 | static void ath10k_control_ibss(struct ath10k_vif *arvif, |
| 629 | struct ieee80211_bss_conf *info, |
| 630 | const u8 self_peer[ETH_ALEN]) |
| 631 | { |
| 632 | int ret = 0; |
| 633 | |
| 634 | if (!info->ibss_joined) { |
| 635 | ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer); |
| 636 | if (ret) |
| 637 | ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n", |
| 638 | self_peer, arvif->vdev_id, ret); |
| 639 | |
| 640 | if (is_zero_ether_addr(arvif->u.ibss.bssid)) |
| 641 | return; |
| 642 | |
| 643 | ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, |
| 644 | arvif->u.ibss.bssid); |
| 645 | if (ret) { |
| 646 | ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n", |
| 647 | arvif->u.ibss.bssid, arvif->vdev_id, ret); |
| 648 | return; |
| 649 | } |
| 650 | |
| 651 | memset(arvif->u.ibss.bssid, 0, ETH_ALEN); |
| 652 | |
| 653 | return; |
| 654 | } |
| 655 | |
| 656 | ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer); |
| 657 | if (ret) { |
| 658 | ath10k_warn("Failed to create IBSS self peer:%pM for VDEV:%d ret:%d\n", |
| 659 | self_peer, arvif->vdev_id, ret); |
| 660 | return; |
| 661 | } |
| 662 | |
| 663 | ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, |
| 664 | WMI_VDEV_PARAM_ATIM_WINDOW, |
| 665 | ATH10K_DEFAULT_ATIM); |
| 666 | if (ret) |
| 667 | ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n", |
| 668 | arvif->vdev_id, ret); |
| 669 | } |
| 670 | |
| 671 | /* |
| 672 | * Review this when mac80211 gains per-interface powersave support. |
| 673 | */ |
| 674 | static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| 675 | { |
| 676 | struct ath10k_generic_iter *ar_iter = data; |
| 677 | struct ieee80211_conf *conf = &ar_iter->ar->hw->conf; |
| 678 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 679 | enum wmi_sta_powersave_param param; |
| 680 | enum wmi_sta_ps_mode psmode; |
| 681 | int ret; |
| 682 | |
| 683 | if (vif->type != NL80211_IFTYPE_STATION) |
| 684 | return; |
| 685 | |
| 686 | if (conf->flags & IEEE80211_CONF_PS) { |
| 687 | psmode = WMI_STA_PS_MODE_ENABLED; |
| 688 | param = WMI_STA_PS_PARAM_INACTIVITY_TIME; |
| 689 | |
| 690 | ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar, |
| 691 | arvif->vdev_id, |
| 692 | param, |
| 693 | conf->dynamic_ps_timeout); |
| 694 | if (ret) { |
| 695 | ath10k_warn("Failed to set inactivity time for VDEV: %d\n", |
| 696 | arvif->vdev_id); |
| 697 | return; |
| 698 | } |
| 699 | |
| 700 | ar_iter->ret = ret; |
| 701 | } else { |
| 702 | psmode = WMI_STA_PS_MODE_DISABLED; |
| 703 | } |
| 704 | |
| 705 | ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id, |
| 706 | psmode); |
| 707 | if (ar_iter->ret) |
| 708 | ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n", |
| 709 | psmode, arvif->vdev_id); |
| 710 | else |
| 711 | ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n", |
| 712 | psmode, arvif->vdev_id); |
| 713 | } |
| 714 | |
| 715 | /**********************/ |
| 716 | /* Station management */ |
| 717 | /**********************/ |
| 718 | |
| 719 | static void ath10k_peer_assoc_h_basic(struct ath10k *ar, |
| 720 | struct ath10k_vif *arvif, |
| 721 | struct ieee80211_sta *sta, |
| 722 | struct ieee80211_bss_conf *bss_conf, |
| 723 | struct wmi_peer_assoc_complete_arg *arg) |
| 724 | { |
| 725 | memcpy(arg->addr, sta->addr, ETH_ALEN); |
| 726 | arg->vdev_id = arvif->vdev_id; |
| 727 | arg->peer_aid = sta->aid; |
| 728 | arg->peer_flags |= WMI_PEER_AUTH; |
| 729 | |
| 730 | if (arvif->vdev_type == WMI_VDEV_TYPE_STA) |
| 731 | /* |
| 732 | * Seems FW have problems with Power Save in STA |
| 733 | * mode when we setup this parameter to high (eg. 5). |
| 734 | * Often we see that FW don't send NULL (with clean P flags) |
| 735 | * frame even there is info about buffered frames in beacons. |
| 736 | * Sometimes we have to wait more than 10 seconds before FW |
| 737 | * will wakeup. Often sending one ping from AP to our device |
| 738 | * just fail (more than 50%). |
| 739 | * |
| 740 | * Seems setting this FW parameter to 1 couse FW |
| 741 | * will check every beacon and will wakup immediately |
| 742 | * after detection buffered data. |
| 743 | */ |
| 744 | arg->peer_listen_intval = 1; |
| 745 | else |
| 746 | arg->peer_listen_intval = ar->hw->conf.listen_interval; |
| 747 | |
| 748 | arg->peer_num_spatial_streams = 1; |
| 749 | |
| 750 | /* |
| 751 | * The assoc capabilities are available only in managed mode. |
| 752 | */ |
| 753 | if (arvif->vdev_type == WMI_VDEV_TYPE_STA && bss_conf) |
| 754 | arg->peer_caps = bss_conf->assoc_capability; |
| 755 | } |
| 756 | |
| 757 | static void ath10k_peer_assoc_h_crypto(struct ath10k *ar, |
| 758 | struct ath10k_vif *arvif, |
| 759 | struct wmi_peer_assoc_complete_arg *arg) |
| 760 | { |
| 761 | struct ieee80211_vif *vif = arvif->vif; |
| 762 | struct ieee80211_bss_conf *info = &vif->bss_conf; |
| 763 | struct cfg80211_bss *bss; |
| 764 | const u8 *rsnie = NULL; |
| 765 | const u8 *wpaie = NULL; |
| 766 | |
| 767 | bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan, |
| 768 | info->bssid, NULL, 0, 0, 0); |
| 769 | if (bss) { |
| 770 | const struct cfg80211_bss_ies *ies; |
| 771 | |
| 772 | rcu_read_lock(); |
| 773 | rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN); |
| 774 | |
| 775 | ies = rcu_dereference(bss->ies); |
| 776 | |
| 777 | wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, |
| 778 | WLAN_OUI_TYPE_MICROSOFT_WPA, |
| 779 | ies->data, |
| 780 | ies->len); |
| 781 | rcu_read_unlock(); |
| 782 | cfg80211_put_bss(ar->hw->wiphy, bss); |
| 783 | } |
| 784 | |
| 785 | /* FIXME: base on RSN IE/WPA IE is a correct idea? */ |
| 786 | if (rsnie || wpaie) { |
| 787 | ath10k_dbg(ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__); |
| 788 | arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY; |
| 789 | } |
| 790 | |
| 791 | if (wpaie) { |
| 792 | ath10k_dbg(ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__); |
| 793 | arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY; |
| 794 | } |
| 795 | } |
| 796 | |
| 797 | static void ath10k_peer_assoc_h_rates(struct ath10k *ar, |
| 798 | struct ieee80211_sta *sta, |
| 799 | struct wmi_peer_assoc_complete_arg *arg) |
| 800 | { |
| 801 | struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates; |
| 802 | const struct ieee80211_supported_band *sband; |
| 803 | const struct ieee80211_rate *rates; |
| 804 | u32 ratemask; |
| 805 | int i; |
| 806 | |
| 807 | sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; |
| 808 | ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band]; |
| 809 | rates = sband->bitrates; |
| 810 | |
| 811 | rateset->num_rates = 0; |
| 812 | |
| 813 | for (i = 0; i < 32; i++, ratemask >>= 1, rates++) { |
| 814 | if (!(ratemask & 1)) |
| 815 | continue; |
| 816 | |
| 817 | rateset->rates[rateset->num_rates] = rates->hw_value; |
| 818 | rateset->num_rates++; |
| 819 | } |
| 820 | } |
| 821 | |
| 822 | static void ath10k_peer_assoc_h_ht(struct ath10k *ar, |
| 823 | struct ieee80211_sta *sta, |
| 824 | struct wmi_peer_assoc_complete_arg *arg) |
| 825 | { |
| 826 | const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; |
| 827 | int smps; |
| 828 | int i, n; |
| 829 | |
| 830 | if (!ht_cap->ht_supported) |
| 831 | return; |
| 832 | |
| 833 | arg->peer_flags |= WMI_PEER_HT; |
| 834 | arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + |
| 835 | ht_cap->ampdu_factor)) - 1; |
| 836 | |
| 837 | arg->peer_mpdu_density = |
| 838 | ath10k_parse_mpdudensity(ht_cap->ampdu_density); |
| 839 | |
| 840 | arg->peer_ht_caps = ht_cap->cap; |
| 841 | arg->peer_rate_caps |= WMI_RC_HT_FLAG; |
| 842 | |
| 843 | if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING) |
| 844 | arg->peer_flags |= WMI_PEER_LDPC; |
| 845 | |
| 846 | if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { |
| 847 | arg->peer_flags |= WMI_PEER_40MHZ; |
| 848 | arg->peer_rate_caps |= WMI_RC_CW40_FLAG; |
| 849 | } |
| 850 | |
| 851 | if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) |
| 852 | arg->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| 853 | |
| 854 | if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40) |
| 855 | arg->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| 856 | |
| 857 | if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) { |
| 858 | arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG; |
| 859 | arg->peer_flags |= WMI_PEER_STBC; |
| 860 | } |
| 861 | |
| 862 | if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) { |
| 863 | u32 stbc; |
| 864 | stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC; |
| 865 | stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| 866 | stbc = stbc << WMI_RC_RX_STBC_FLAG_S; |
| 867 | arg->peer_rate_caps |= stbc; |
| 868 | arg->peer_flags |= WMI_PEER_STBC; |
| 869 | } |
| 870 | |
| 871 | smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS; |
| 872 | smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT; |
| 873 | |
| 874 | if (smps == WLAN_HT_CAP_SM_PS_STATIC) { |
| 875 | arg->peer_flags |= WMI_PEER_SPATIAL_MUX; |
| 876 | arg->peer_flags |= WMI_PEER_STATIC_MIMOPS; |
| 877 | } else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) { |
| 878 | arg->peer_flags |= WMI_PEER_SPATIAL_MUX; |
| 879 | arg->peer_flags |= WMI_PEER_DYN_MIMOPS; |
| 880 | } |
| 881 | |
| 882 | if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2]) |
| 883 | arg->peer_rate_caps |= WMI_RC_TS_FLAG; |
| 884 | else if (ht_cap->mcs.rx_mask[1]) |
| 885 | arg->peer_rate_caps |= WMI_RC_DS_FLAG; |
| 886 | |
| 887 | for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++) |
| 888 | if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8)) |
| 889 | arg->peer_ht_rates.rates[n++] = i; |
| 890 | |
| 891 | arg->peer_ht_rates.num_rates = n; |
| 892 | arg->peer_num_spatial_streams = max((n+7) / 8, 1); |
| 893 | |
| 894 | ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n", |
| 895 | arg->peer_ht_rates.num_rates, |
| 896 | arg->peer_num_spatial_streams); |
| 897 | } |
| 898 | |
| 899 | static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar, |
| 900 | struct ath10k_vif *arvif, |
| 901 | struct ieee80211_sta *sta, |
| 902 | struct ieee80211_bss_conf *bss_conf, |
| 903 | struct wmi_peer_assoc_complete_arg *arg) |
| 904 | { |
| 905 | u32 uapsd = 0; |
| 906 | u32 max_sp = 0; |
| 907 | |
| 908 | if (sta->wme) |
| 909 | arg->peer_flags |= WMI_PEER_QOS; |
| 910 | |
| 911 | if (sta->wme && sta->uapsd_queues) { |
| 912 | ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n", |
| 913 | sta->uapsd_queues, sta->max_sp); |
| 914 | |
| 915 | arg->peer_flags |= WMI_PEER_APSD; |
| 916 | arg->peer_flags |= WMI_RC_UAPSD_FLAG; |
| 917 | |
| 918 | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) |
| 919 | uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | |
| 920 | WMI_AP_PS_UAPSD_AC3_TRIGGER_EN; |
| 921 | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) |
| 922 | uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN | |
| 923 | WMI_AP_PS_UAPSD_AC2_TRIGGER_EN; |
| 924 | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) |
| 925 | uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN | |
| 926 | WMI_AP_PS_UAPSD_AC1_TRIGGER_EN; |
| 927 | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) |
| 928 | uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN | |
| 929 | WMI_AP_PS_UAPSD_AC0_TRIGGER_EN; |
| 930 | |
| 931 | |
| 932 | if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP) |
| 933 | max_sp = sta->max_sp; |
| 934 | |
| 935 | ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| 936 | sta->addr, |
| 937 | WMI_AP_PS_PEER_PARAM_UAPSD, |
| 938 | uapsd); |
| 939 | |
| 940 | ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| 941 | sta->addr, |
| 942 | WMI_AP_PS_PEER_PARAM_MAX_SP, |
| 943 | max_sp); |
| 944 | |
| 945 | /* TODO setup this based on STA listen interval and |
| 946 | beacon interval. Currently we don't know |
| 947 | sta->listen_interval - mac80211 patch required. |
| 948 | Currently use 10 seconds */ |
| 949 | ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, |
| 950 | sta->addr, |
| 951 | WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, |
| 952 | 10); |
| 953 | } |
| 954 | } |
| 955 | |
| 956 | static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar, |
| 957 | struct ath10k_vif *arvif, |
| 958 | struct ieee80211_sta *sta, |
| 959 | struct ieee80211_bss_conf *bss_conf, |
| 960 | struct wmi_peer_assoc_complete_arg *arg) |
| 961 | { |
| 962 | if (bss_conf->qos) |
| 963 | arg->peer_flags |= WMI_PEER_QOS; |
| 964 | } |
| 965 | |
| 966 | static void ath10k_peer_assoc_h_vht(struct ath10k *ar, |
| 967 | struct ieee80211_sta *sta, |
| 968 | struct wmi_peer_assoc_complete_arg *arg) |
| 969 | { |
| 970 | const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; |
| 971 | |
| 972 | if (!vht_cap->vht_supported) |
| 973 | return; |
| 974 | |
| 975 | arg->peer_flags |= WMI_PEER_VHT; |
| 976 | |
| 977 | arg->peer_vht_caps = vht_cap->cap; |
| 978 | |
| 979 | if (sta->bandwidth == IEEE80211_STA_RX_BW_80) |
| 980 | arg->peer_flags |= WMI_PEER_80MHZ; |
| 981 | |
| 982 | arg->peer_vht_rates.rx_max_rate = |
| 983 | __le16_to_cpu(vht_cap->vht_mcs.rx_highest); |
| 984 | arg->peer_vht_rates.rx_mcs_set = |
| 985 | __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); |
| 986 | arg->peer_vht_rates.tx_max_rate = |
| 987 | __le16_to_cpu(vht_cap->vht_mcs.tx_highest); |
| 988 | arg->peer_vht_rates.tx_mcs_set = |
| 989 | __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); |
| 990 | |
| 991 | ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n"); |
| 992 | } |
| 993 | |
| 994 | static void ath10k_peer_assoc_h_qos(struct ath10k *ar, |
| 995 | struct ath10k_vif *arvif, |
| 996 | struct ieee80211_sta *sta, |
| 997 | struct ieee80211_bss_conf *bss_conf, |
| 998 | struct wmi_peer_assoc_complete_arg *arg) |
| 999 | { |
| 1000 | switch (arvif->vdev_type) { |
| 1001 | case WMI_VDEV_TYPE_AP: |
| 1002 | ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg); |
| 1003 | break; |
| 1004 | case WMI_VDEV_TYPE_STA: |
| 1005 | ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg); |
| 1006 | break; |
| 1007 | default: |
| 1008 | break; |
| 1009 | } |
| 1010 | } |
| 1011 | |
| 1012 | static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, |
| 1013 | struct ath10k_vif *arvif, |
| 1014 | struct ieee80211_sta *sta, |
| 1015 | struct wmi_peer_assoc_complete_arg *arg) |
| 1016 | { |
| 1017 | enum wmi_phy_mode phymode = MODE_UNKNOWN; |
| 1018 | |
| 1019 | /* FIXME: add VHT */ |
| 1020 | |
| 1021 | switch (ar->hw->conf.chandef.chan->band) { |
| 1022 | case IEEE80211_BAND_2GHZ: |
| 1023 | if (sta->ht_cap.ht_supported) { |
| 1024 | if (sta->bandwidth == IEEE80211_STA_RX_BW_40) |
| 1025 | phymode = MODE_11NG_HT40; |
| 1026 | else |
| 1027 | phymode = MODE_11NG_HT20; |
| 1028 | } else { |
| 1029 | phymode = MODE_11G; |
| 1030 | } |
| 1031 | |
| 1032 | break; |
| 1033 | case IEEE80211_BAND_5GHZ: |
| 1034 | if (sta->ht_cap.ht_supported) { |
| 1035 | if (sta->bandwidth == IEEE80211_STA_RX_BW_40) |
| 1036 | phymode = MODE_11NA_HT40; |
| 1037 | else |
| 1038 | phymode = MODE_11NA_HT20; |
| 1039 | } else { |
| 1040 | phymode = MODE_11A; |
| 1041 | } |
| 1042 | |
| 1043 | break; |
| 1044 | default: |
| 1045 | break; |
| 1046 | } |
| 1047 | |
| 1048 | arg->peer_phymode = phymode; |
| 1049 | WARN_ON(phymode == MODE_UNKNOWN); |
| 1050 | } |
| 1051 | |
| 1052 | static int ath10k_peer_assoc(struct ath10k *ar, |
| 1053 | struct ath10k_vif *arvif, |
| 1054 | struct ieee80211_sta *sta, |
| 1055 | struct ieee80211_bss_conf *bss_conf) |
| 1056 | { |
| 1057 | struct wmi_peer_assoc_complete_arg arg; |
| 1058 | |
| 1059 | memset(&arg, 0, sizeof(struct wmi_peer_assoc_complete_arg)); |
| 1060 | |
| 1061 | ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, &arg); |
| 1062 | ath10k_peer_assoc_h_crypto(ar, arvif, &arg); |
| 1063 | ath10k_peer_assoc_h_rates(ar, sta, &arg); |
| 1064 | ath10k_peer_assoc_h_ht(ar, sta, &arg); |
| 1065 | ath10k_peer_assoc_h_vht(ar, sta, &arg); |
| 1066 | ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, &arg); |
| 1067 | ath10k_peer_assoc_h_phymode(ar, arvif, sta, &arg); |
| 1068 | |
| 1069 | return ath10k_wmi_peer_assoc(ar, &arg); |
| 1070 | } |
| 1071 | |
| 1072 | /* can be called only in mac80211 callbacks due to `key_count` usage */ |
| 1073 | static void ath10k_bss_assoc(struct ieee80211_hw *hw, |
| 1074 | struct ieee80211_vif *vif, |
| 1075 | struct ieee80211_bss_conf *bss_conf) |
| 1076 | { |
| 1077 | struct ath10k *ar = hw->priv; |
| 1078 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1079 | struct ieee80211_sta *ap_sta; |
| 1080 | int ret; |
| 1081 | |
| 1082 | rcu_read_lock(); |
| 1083 | |
| 1084 | ap_sta = ieee80211_find_sta(vif, bss_conf->bssid); |
| 1085 | if (!ap_sta) { |
| 1086 | ath10k_warn("Failed to find station entry for %pM\n", |
| 1087 | bss_conf->bssid); |
| 1088 | rcu_read_unlock(); |
| 1089 | return; |
| 1090 | } |
| 1091 | |
| 1092 | ret = ath10k_peer_assoc(ar, arvif, ap_sta, bss_conf); |
| 1093 | if (ret) { |
| 1094 | ath10k_warn("Peer assoc failed for %pM\n", bss_conf->bssid); |
| 1095 | rcu_read_unlock(); |
| 1096 | return; |
| 1097 | } |
| 1098 | |
| 1099 | rcu_read_unlock(); |
| 1100 | |
| 1101 | ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid, |
| 1102 | bss_conf->bssid); |
| 1103 | if (ret) |
| 1104 | ath10k_warn("VDEV: %d up failed: ret %d\n", |
| 1105 | arvif->vdev_id, ret); |
| 1106 | else |
| 1107 | ath10k_dbg(ATH10K_DBG_MAC, |
| 1108 | "VDEV: %d associated, BSSID: %pM, AID: %d\n", |
| 1109 | arvif->vdev_id, bss_conf->bssid, bss_conf->aid); |
| 1110 | } |
| 1111 | |
| 1112 | /* |
| 1113 | * FIXME: flush TIDs |
| 1114 | */ |
| 1115 | static void ath10k_bss_disassoc(struct ieee80211_hw *hw, |
| 1116 | struct ieee80211_vif *vif) |
| 1117 | { |
| 1118 | struct ath10k *ar = hw->priv; |
| 1119 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1120 | int ret; |
| 1121 | |
| 1122 | /* |
| 1123 | * For some reason, calling VDEV-DOWN before VDEV-STOP |
| 1124 | * makes the FW to send frames via HTT after disassociation. |
| 1125 | * No idea why this happens, even though VDEV-DOWN is supposed |
| 1126 | * to be analogous to link down, so just stop the VDEV. |
| 1127 | */ |
| 1128 | ret = ath10k_vdev_stop(arvif); |
| 1129 | if (!ret) |
| 1130 | ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n", |
| 1131 | arvif->vdev_id); |
| 1132 | |
| 1133 | /* |
| 1134 | * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and |
| 1135 | * report beacons from previously associated network through HTT. |
| 1136 | * This in turn would spam mac80211 WARN_ON if we bring down all |
| 1137 | * interfaces as it expects there is no rx when no interface is |
| 1138 | * running. |
| 1139 | */ |
| 1140 | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); |
| 1141 | if (ret) |
| 1142 | ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n", |
| 1143 | arvif->vdev_id, ret); |
| 1144 | |
| 1145 | ath10k_wmi_flush_tx(ar); |
| 1146 | |
| 1147 | arvif->def_wep_key_index = 0; |
| 1148 | } |
| 1149 | |
| 1150 | static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif, |
| 1151 | struct ieee80211_sta *sta) |
| 1152 | { |
| 1153 | int ret = 0; |
| 1154 | |
| 1155 | ret = ath10k_peer_assoc(ar, arvif, sta, NULL); |
| 1156 | if (ret) { |
| 1157 | ath10k_warn("WMI peer assoc failed for %pM\n", sta->addr); |
| 1158 | return ret; |
| 1159 | } |
| 1160 | |
| 1161 | ret = ath10k_install_peer_wep_keys(arvif, sta->addr); |
| 1162 | if (ret) { |
| 1163 | ath10k_warn("could not install peer wep keys (%d)\n", ret); |
| 1164 | return ret; |
| 1165 | } |
| 1166 | |
| 1167 | return ret; |
| 1168 | } |
| 1169 | |
| 1170 | static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif, |
| 1171 | struct ieee80211_sta *sta) |
| 1172 | { |
| 1173 | int ret = 0; |
| 1174 | |
| 1175 | ret = ath10k_clear_peer_keys(arvif, sta->addr); |
| 1176 | if (ret) { |
| 1177 | ath10k_warn("could not clear all peer wep keys (%d)\n", ret); |
| 1178 | return ret; |
| 1179 | } |
| 1180 | |
| 1181 | return ret; |
| 1182 | } |
| 1183 | |
| 1184 | /**************/ |
| 1185 | /* Regulatory */ |
| 1186 | /**************/ |
| 1187 | |
| 1188 | static int ath10k_update_channel_list(struct ath10k *ar) |
| 1189 | { |
| 1190 | struct ieee80211_hw *hw = ar->hw; |
| 1191 | struct ieee80211_supported_band **bands; |
| 1192 | enum ieee80211_band band; |
| 1193 | struct ieee80211_channel *channel; |
| 1194 | struct wmi_scan_chan_list_arg arg = {0}; |
| 1195 | struct wmi_channel_arg *ch; |
| 1196 | bool passive; |
| 1197 | int len; |
| 1198 | int ret; |
| 1199 | int i; |
| 1200 | |
| 1201 | bands = hw->wiphy->bands; |
| 1202 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| 1203 | if (!bands[band]) |
| 1204 | continue; |
| 1205 | |
| 1206 | for (i = 0; i < bands[band]->n_channels; i++) { |
| 1207 | if (bands[band]->channels[i].flags & |
| 1208 | IEEE80211_CHAN_DISABLED) |
| 1209 | continue; |
| 1210 | |
| 1211 | arg.n_channels++; |
| 1212 | } |
| 1213 | } |
| 1214 | |
| 1215 | len = sizeof(struct wmi_channel_arg) * arg.n_channels; |
| 1216 | arg.channels = kzalloc(len, GFP_KERNEL); |
| 1217 | if (!arg.channels) |
| 1218 | return -ENOMEM; |
| 1219 | |
| 1220 | ch = arg.channels; |
| 1221 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| 1222 | if (!bands[band]) |
| 1223 | continue; |
| 1224 | |
| 1225 | for (i = 0; i < bands[band]->n_channels; i++) { |
| 1226 | channel = &bands[band]->channels[i]; |
| 1227 | |
| 1228 | if (channel->flags & IEEE80211_CHAN_DISABLED) |
| 1229 | continue; |
| 1230 | |
| 1231 | ch->allow_ht = true; |
| 1232 | |
| 1233 | /* FIXME: when should we really allow VHT? */ |
| 1234 | ch->allow_vht = true; |
| 1235 | |
| 1236 | ch->allow_ibss = |
| 1237 | !(channel->flags & IEEE80211_CHAN_NO_IBSS); |
| 1238 | |
| 1239 | ch->ht40plus = |
| 1240 | !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS); |
| 1241 | |
| 1242 | passive = channel->flags & IEEE80211_CHAN_PASSIVE_SCAN; |
| 1243 | ch->passive = passive; |
| 1244 | |
| 1245 | ch->freq = channel->center_freq; |
| 1246 | ch->min_power = channel->max_power * 3; |
| 1247 | ch->max_power = channel->max_power * 4; |
| 1248 | ch->max_reg_power = channel->max_reg_power * 4; |
| 1249 | ch->max_antenna_gain = channel->max_antenna_gain; |
| 1250 | ch->reg_class_id = 0; /* FIXME */ |
| 1251 | |
| 1252 | /* FIXME: why use only legacy modes, why not any |
| 1253 | * HT/VHT modes? Would that even make any |
| 1254 | * difference? */ |
| 1255 | if (channel->band == IEEE80211_BAND_2GHZ) |
| 1256 | ch->mode = MODE_11G; |
| 1257 | else |
| 1258 | ch->mode = MODE_11A; |
| 1259 | |
| 1260 | if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN)) |
| 1261 | continue; |
| 1262 | |
| 1263 | ath10k_dbg(ATH10K_DBG_WMI, |
| 1264 | "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", |
| 1265 | __func__, ch - arg.channels, arg.n_channels, |
| 1266 | ch->freq, ch->max_power, ch->max_reg_power, |
| 1267 | ch->max_antenna_gain, ch->mode); |
| 1268 | |
| 1269 | ch++; |
| 1270 | } |
| 1271 | } |
| 1272 | |
| 1273 | ret = ath10k_wmi_scan_chan_list(ar, &arg); |
| 1274 | kfree(arg.channels); |
| 1275 | |
| 1276 | return ret; |
| 1277 | } |
| 1278 | |
| 1279 | static void ath10k_reg_notifier(struct wiphy *wiphy, |
| 1280 | struct regulatory_request *request) |
| 1281 | { |
| 1282 | struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| 1283 | struct reg_dmn_pair_mapping *regpair; |
| 1284 | struct ath10k *ar = hw->priv; |
| 1285 | int ret; |
| 1286 | |
| 1287 | ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); |
| 1288 | |
| 1289 | ret = ath10k_update_channel_list(ar); |
| 1290 | if (ret) |
| 1291 | ath10k_warn("could not update channel list (%d)\n", ret); |
| 1292 | |
| 1293 | regpair = ar->ath_common.regulatory.regpair; |
| 1294 | /* Target allows setting up per-band regdomain but ath_common provides |
| 1295 | * a combined one only */ |
| 1296 | ret = ath10k_wmi_pdev_set_regdomain(ar, |
| 1297 | regpair->regDmnEnum, |
| 1298 | regpair->regDmnEnum, /* 2ghz */ |
| 1299 | regpair->regDmnEnum, /* 5ghz */ |
| 1300 | regpair->reg_2ghz_ctl, |
| 1301 | regpair->reg_5ghz_ctl); |
| 1302 | if (ret) |
| 1303 | ath10k_warn("could not set pdev regdomain (%d)\n", ret); |
| 1304 | } |
| 1305 | |
| 1306 | /***************/ |
| 1307 | /* TX handlers */ |
| 1308 | /***************/ |
| 1309 | |
| 1310 | /* |
| 1311 | * Frames sent to the FW have to be in "Native Wifi" format. |
| 1312 | * Strip the QoS field from the 802.11 header. |
| 1313 | */ |
| 1314 | static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw, |
| 1315 | struct ieee80211_tx_control *control, |
| 1316 | struct sk_buff *skb) |
| 1317 | { |
| 1318 | struct ieee80211_hdr *hdr = (void *)skb->data; |
| 1319 | u8 *qos_ctl; |
| 1320 | |
| 1321 | if (!ieee80211_is_data_qos(hdr->frame_control)) |
| 1322 | return; |
| 1323 | |
| 1324 | qos_ctl = ieee80211_get_qos_ctl(hdr); |
| 1325 | memmove(qos_ctl, qos_ctl + IEEE80211_QOS_CTL_LEN, |
| 1326 | skb->len - ieee80211_hdrlen(hdr->frame_control)); |
| 1327 | skb_trim(skb, skb->len - IEEE80211_QOS_CTL_LEN); |
| 1328 | } |
| 1329 | |
| 1330 | static void ath10k_tx_h_update_wep_key(struct sk_buff *skb) |
| 1331 | { |
| 1332 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 1333 | struct ieee80211_vif *vif = info->control.vif; |
| 1334 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1335 | struct ath10k *ar = arvif->ar; |
| 1336 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| 1337 | struct ieee80211_key_conf *key = info->control.hw_key; |
| 1338 | int ret; |
| 1339 | |
| 1340 | /* TODO AP mode should be implemented */ |
| 1341 | if (vif->type != NL80211_IFTYPE_STATION) |
| 1342 | return; |
| 1343 | |
| 1344 | if (!ieee80211_has_protected(hdr->frame_control)) |
| 1345 | return; |
| 1346 | |
| 1347 | if (!key) |
| 1348 | return; |
| 1349 | |
| 1350 | if (key->cipher != WLAN_CIPHER_SUITE_WEP40 && |
| 1351 | key->cipher != WLAN_CIPHER_SUITE_WEP104) |
| 1352 | return; |
| 1353 | |
| 1354 | if (key->keyidx == arvif->def_wep_key_index) |
| 1355 | return; |
| 1356 | |
| 1357 | ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx); |
| 1358 | |
| 1359 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 1360 | WMI_VDEV_PARAM_DEF_KEYID, |
| 1361 | key->keyidx); |
| 1362 | if (ret) { |
| 1363 | ath10k_warn("could not update wep keyidx (%d)\n", ret); |
| 1364 | return; |
| 1365 | } |
| 1366 | |
| 1367 | arvif->def_wep_key_index = key->keyidx; |
| 1368 | } |
| 1369 | |
| 1370 | static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb) |
| 1371 | { |
| 1372 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| 1373 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 1374 | struct ieee80211_vif *vif = info->control.vif; |
| 1375 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1376 | |
| 1377 | /* This is case only for P2P_GO */ |
| 1378 | if (arvif->vdev_type != WMI_VDEV_TYPE_AP || |
| 1379 | arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO) |
| 1380 | return; |
| 1381 | |
| 1382 | if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) { |
| 1383 | spin_lock_bh(&ar->data_lock); |
| 1384 | if (arvif->u.ap.noa_data) |
| 1385 | if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len, |
| 1386 | GFP_ATOMIC)) |
| 1387 | memcpy(skb_put(skb, arvif->u.ap.noa_len), |
| 1388 | arvif->u.ap.noa_data, |
| 1389 | arvif->u.ap.noa_len); |
| 1390 | spin_unlock_bh(&ar->data_lock); |
| 1391 | } |
| 1392 | } |
| 1393 | |
| 1394 | static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb) |
| 1395 | { |
| 1396 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| 1397 | int ret; |
| 1398 | |
| 1399 | if (ieee80211_is_mgmt(hdr->frame_control)) |
| 1400 | ret = ath10k_htt_mgmt_tx(ar->htt, skb); |
| 1401 | else if (ieee80211_is_nullfunc(hdr->frame_control)) |
| 1402 | /* FW does not report tx status properly for NullFunc frames |
| 1403 | * unless they are sent through mgmt tx path. mac80211 sends |
| 1404 | * those frames when it detects link/beacon loss and depends on |
| 1405 | * the tx status to be correct. */ |
| 1406 | ret = ath10k_htt_mgmt_tx(ar->htt, skb); |
| 1407 | else |
| 1408 | ret = ath10k_htt_tx(ar->htt, skb); |
| 1409 | |
| 1410 | if (ret) { |
| 1411 | ath10k_warn("tx failed (%d). dropping packet.\n", ret); |
| 1412 | ieee80211_free_txskb(ar->hw, skb); |
| 1413 | } |
| 1414 | } |
| 1415 | |
| 1416 | void ath10k_offchan_tx_purge(struct ath10k *ar) |
| 1417 | { |
| 1418 | struct sk_buff *skb; |
| 1419 | |
| 1420 | for (;;) { |
| 1421 | skb = skb_dequeue(&ar->offchan_tx_queue); |
| 1422 | if (!skb) |
| 1423 | break; |
| 1424 | |
| 1425 | ieee80211_free_txskb(ar->hw, skb); |
| 1426 | } |
| 1427 | } |
| 1428 | |
| 1429 | void ath10k_offchan_tx_work(struct work_struct *work) |
| 1430 | { |
| 1431 | struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work); |
| 1432 | struct ath10k_peer *peer; |
| 1433 | struct ieee80211_hdr *hdr; |
| 1434 | struct sk_buff *skb; |
| 1435 | const u8 *peer_addr; |
| 1436 | int vdev_id; |
| 1437 | int ret; |
| 1438 | |
| 1439 | /* FW requirement: We must create a peer before FW will send out |
| 1440 | * an offchannel frame. Otherwise the frame will be stuck and |
| 1441 | * never transmitted. We delete the peer upon tx completion. |
| 1442 | * It is unlikely that a peer for offchannel tx will already be |
| 1443 | * present. However it may be in some rare cases so account for that. |
| 1444 | * Otherwise we might remove a legitimate peer and break stuff. */ |
| 1445 | |
| 1446 | for (;;) { |
| 1447 | skb = skb_dequeue(&ar->offchan_tx_queue); |
| 1448 | if (!skb) |
| 1449 | break; |
| 1450 | |
| 1451 | mutex_lock(&ar->conf_mutex); |
| 1452 | |
| 1453 | ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n", |
| 1454 | skb); |
| 1455 | |
| 1456 | hdr = (struct ieee80211_hdr *)skb->data; |
| 1457 | peer_addr = ieee80211_get_DA(hdr); |
| 1458 | vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id; |
| 1459 | |
| 1460 | spin_lock_bh(&ar->data_lock); |
| 1461 | peer = ath10k_peer_find(ar, vdev_id, peer_addr); |
| 1462 | spin_unlock_bh(&ar->data_lock); |
| 1463 | |
| 1464 | if (peer) |
| 1465 | ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n", |
| 1466 | peer_addr, vdev_id); |
| 1467 | |
| 1468 | if (!peer) { |
| 1469 | ret = ath10k_peer_create(ar, vdev_id, peer_addr); |
| 1470 | if (ret) |
| 1471 | ath10k_warn("peer %pM on vdev %d not created (%d)\n", |
| 1472 | peer_addr, vdev_id, ret); |
| 1473 | } |
| 1474 | |
| 1475 | spin_lock_bh(&ar->data_lock); |
| 1476 | INIT_COMPLETION(ar->offchan_tx_completed); |
| 1477 | ar->offchan_tx_skb = skb; |
| 1478 | spin_unlock_bh(&ar->data_lock); |
| 1479 | |
| 1480 | ath10k_tx_htt(ar, skb); |
| 1481 | |
| 1482 | ret = wait_for_completion_timeout(&ar->offchan_tx_completed, |
| 1483 | 3 * HZ); |
| 1484 | if (ret <= 0) |
| 1485 | ath10k_warn("timed out waiting for offchannel skb %p\n", |
| 1486 | skb); |
| 1487 | |
| 1488 | if (!peer) { |
| 1489 | ret = ath10k_peer_delete(ar, vdev_id, peer_addr); |
| 1490 | if (ret) |
| 1491 | ath10k_warn("peer %pM on vdev %d not deleted (%d)\n", |
| 1492 | peer_addr, vdev_id, ret); |
| 1493 | } |
| 1494 | |
| 1495 | mutex_unlock(&ar->conf_mutex); |
| 1496 | } |
| 1497 | } |
| 1498 | |
| 1499 | /************/ |
| 1500 | /* Scanning */ |
| 1501 | /************/ |
| 1502 | |
| 1503 | /* |
| 1504 | * This gets called if we dont get a heart-beat during scan. |
| 1505 | * This may indicate the FW has hung and we need to abort the |
| 1506 | * scan manually to prevent cancel_hw_scan() from deadlocking |
| 1507 | */ |
| 1508 | void ath10k_reset_scan(unsigned long ptr) |
| 1509 | { |
| 1510 | struct ath10k *ar = (struct ath10k *)ptr; |
| 1511 | |
| 1512 | spin_lock_bh(&ar->data_lock); |
| 1513 | if (!ar->scan.in_progress) { |
| 1514 | spin_unlock_bh(&ar->data_lock); |
| 1515 | return; |
| 1516 | } |
| 1517 | |
| 1518 | ath10k_warn("scan timeout. resetting. fw issue?\n"); |
| 1519 | |
| 1520 | if (ar->scan.is_roc) |
| 1521 | ieee80211_remain_on_channel_expired(ar->hw); |
| 1522 | else |
| 1523 | ieee80211_scan_completed(ar->hw, 1 /* aborted */); |
| 1524 | |
| 1525 | ar->scan.in_progress = false; |
| 1526 | complete_all(&ar->scan.completed); |
| 1527 | spin_unlock_bh(&ar->data_lock); |
| 1528 | } |
| 1529 | |
| 1530 | static int ath10k_abort_scan(struct ath10k *ar) |
| 1531 | { |
| 1532 | struct wmi_stop_scan_arg arg = { |
| 1533 | .req_id = 1, /* FIXME */ |
| 1534 | .req_type = WMI_SCAN_STOP_ONE, |
| 1535 | .u.scan_id = ATH10K_SCAN_ID, |
| 1536 | }; |
| 1537 | int ret; |
| 1538 | |
| 1539 | lockdep_assert_held(&ar->conf_mutex); |
| 1540 | |
| 1541 | del_timer_sync(&ar->scan.timeout); |
| 1542 | |
| 1543 | spin_lock_bh(&ar->data_lock); |
| 1544 | if (!ar->scan.in_progress) { |
| 1545 | spin_unlock_bh(&ar->data_lock); |
| 1546 | return 0; |
| 1547 | } |
| 1548 | |
| 1549 | ar->scan.aborting = true; |
| 1550 | spin_unlock_bh(&ar->data_lock); |
| 1551 | |
| 1552 | ret = ath10k_wmi_stop_scan(ar, &arg); |
| 1553 | if (ret) { |
| 1554 | ath10k_warn("could not submit wmi stop scan (%d)\n", ret); |
| 1555 | return -EIO; |
| 1556 | } |
| 1557 | |
| 1558 | ath10k_wmi_flush_tx(ar); |
| 1559 | |
| 1560 | ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ); |
| 1561 | if (ret == 0) |
| 1562 | ath10k_warn("timed out while waiting for scan to stop\n"); |
| 1563 | |
| 1564 | /* scan completion may be done right after we timeout here, so let's |
| 1565 | * check the in_progress and tell mac80211 scan is completed. if we |
| 1566 | * don't do that and FW fails to send us scan completion indication |
| 1567 | * then userspace won't be able to scan anymore */ |
| 1568 | ret = 0; |
| 1569 | |
| 1570 | spin_lock_bh(&ar->data_lock); |
| 1571 | if (ar->scan.in_progress) { |
| 1572 | ath10k_warn("could not stop scan. its still in progress\n"); |
| 1573 | ar->scan.in_progress = false; |
| 1574 | ath10k_offchan_tx_purge(ar); |
| 1575 | ret = -ETIMEDOUT; |
| 1576 | } |
| 1577 | spin_unlock_bh(&ar->data_lock); |
| 1578 | |
| 1579 | return ret; |
| 1580 | } |
| 1581 | |
| 1582 | static int ath10k_start_scan(struct ath10k *ar, |
| 1583 | const struct wmi_start_scan_arg *arg) |
| 1584 | { |
| 1585 | int ret; |
| 1586 | |
| 1587 | lockdep_assert_held(&ar->conf_mutex); |
| 1588 | |
| 1589 | ret = ath10k_wmi_start_scan(ar, arg); |
| 1590 | if (ret) |
| 1591 | return ret; |
| 1592 | |
| 1593 | /* make sure we submit the command so the completion |
| 1594 | * timeout makes sense */ |
| 1595 | ath10k_wmi_flush_tx(ar); |
| 1596 | |
| 1597 | ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ); |
| 1598 | if (ret == 0) { |
| 1599 | ath10k_abort_scan(ar); |
| 1600 | return ret; |
| 1601 | } |
| 1602 | |
| 1603 | /* the scan can complete earlier, before we even |
| 1604 | * start the timer. in that case the timer handler |
| 1605 | * checks ar->scan.in_progress and bails out if its |
| 1606 | * false. Add a 200ms margin to account event/command |
| 1607 | * processing. */ |
| 1608 | mod_timer(&ar->scan.timeout, jiffies + |
| 1609 | msecs_to_jiffies(arg->max_scan_time+200)); |
| 1610 | return 0; |
| 1611 | } |
| 1612 | |
| 1613 | /**********************/ |
| 1614 | /* mac80211 callbacks */ |
| 1615 | /**********************/ |
| 1616 | |
| 1617 | static void ath10k_tx(struct ieee80211_hw *hw, |
| 1618 | struct ieee80211_tx_control *control, |
| 1619 | struct sk_buff *skb) |
| 1620 | { |
| 1621 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 1622 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| 1623 | struct ath10k *ar = hw->priv; |
| 1624 | struct ath10k_vif *arvif = NULL; |
| 1625 | u32 vdev_id = 0; |
| 1626 | u8 tid; |
| 1627 | |
| 1628 | if (info->control.vif) { |
| 1629 | arvif = ath10k_vif_to_arvif(info->control.vif); |
| 1630 | vdev_id = arvif->vdev_id; |
| 1631 | } else if (ar->monitor_enabled) { |
| 1632 | vdev_id = ar->monitor_vdev_id; |
| 1633 | } |
| 1634 | |
| 1635 | /* We should disable CCK RATE due to P2P */ |
| 1636 | if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE) |
| 1637 | ath10k_dbg(ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n"); |
| 1638 | |
| 1639 | /* we must calculate tid before we apply qos workaround |
| 1640 | * as we'd lose the qos control field */ |
| 1641 | tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; |
| 1642 | if (ieee80211_is_data_qos(hdr->frame_control) && |
| 1643 | is_unicast_ether_addr(ieee80211_get_DA(hdr))) { |
| 1644 | u8 *qc = ieee80211_get_qos_ctl(hdr); |
| 1645 | tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; |
| 1646 | } |
| 1647 | |
| 1648 | ath10k_tx_h_qos_workaround(hw, control, skb); |
| 1649 | ath10k_tx_h_update_wep_key(skb); |
| 1650 | ath10k_tx_h_add_p2p_noa_ie(ar, skb); |
| 1651 | ath10k_tx_h_seq_no(skb); |
| 1652 | |
| 1653 | memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb))); |
| 1654 | ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id; |
| 1655 | ATH10K_SKB_CB(skb)->htt.tid = tid; |
| 1656 | |
| 1657 | if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { |
| 1658 | spin_lock_bh(&ar->data_lock); |
| 1659 | ATH10K_SKB_CB(skb)->htt.is_offchan = true; |
| 1660 | ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id; |
| 1661 | spin_unlock_bh(&ar->data_lock); |
| 1662 | |
| 1663 | ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb); |
| 1664 | |
| 1665 | skb_queue_tail(&ar->offchan_tx_queue, skb); |
| 1666 | ieee80211_queue_work(hw, &ar->offchan_tx_work); |
| 1667 | return; |
| 1668 | } |
| 1669 | |
| 1670 | ath10k_tx_htt(ar, skb); |
| 1671 | } |
| 1672 | |
| 1673 | /* |
| 1674 | * Initialize various parameters with default vaules. |
| 1675 | */ |
| 1676 | static int ath10k_start(struct ieee80211_hw *hw) |
| 1677 | { |
| 1678 | struct ath10k *ar = hw->priv; |
| 1679 | int ret; |
| 1680 | |
| 1681 | ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1); |
| 1682 | if (ret) |
| 1683 | ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n", |
| 1684 | ret); |
| 1685 | |
| 1686 | ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0); |
| 1687 | if (ret) |
| 1688 | ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n", |
| 1689 | ret); |
| 1690 | |
| 1691 | return 0; |
| 1692 | } |
| 1693 | |
| 1694 | static void ath10k_stop(struct ieee80211_hw *hw) |
| 1695 | { |
| 1696 | struct ath10k *ar = hw->priv; |
| 1697 | |
| 1698 | /* avoid leaks in case FW never confirms scan for offchannel */ |
| 1699 | cancel_work_sync(&ar->offchan_tx_work); |
| 1700 | ath10k_offchan_tx_purge(ar); |
| 1701 | } |
| 1702 | |
| 1703 | static int ath10k_config(struct ieee80211_hw *hw, u32 changed) |
| 1704 | { |
| 1705 | struct ath10k_generic_iter ar_iter; |
| 1706 | struct ath10k *ar = hw->priv; |
| 1707 | struct ieee80211_conf *conf = &hw->conf; |
| 1708 | int ret = 0; |
| 1709 | u32 flags; |
| 1710 | |
| 1711 | mutex_lock(&ar->conf_mutex); |
| 1712 | |
| 1713 | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| 1714 | ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n", |
| 1715 | conf->chandef.chan->center_freq); |
| 1716 | spin_lock_bh(&ar->data_lock); |
| 1717 | ar->rx_channel = conf->chandef.chan; |
| 1718 | spin_unlock_bh(&ar->data_lock); |
| 1719 | } |
| 1720 | |
| 1721 | if (changed & IEEE80211_CONF_CHANGE_PS) { |
| 1722 | memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter)); |
| 1723 | ar_iter.ar = ar; |
| 1724 | flags = IEEE80211_IFACE_ITER_RESUME_ALL; |
| 1725 | |
| 1726 | ieee80211_iterate_active_interfaces_atomic(hw, |
| 1727 | flags, |
| 1728 | ath10k_ps_iter, |
| 1729 | &ar_iter); |
| 1730 | |
| 1731 | ret = ar_iter.ret; |
| 1732 | } |
| 1733 | |
| 1734 | if (changed & IEEE80211_CONF_CHANGE_MONITOR) { |
| 1735 | if (conf->flags & IEEE80211_CONF_MONITOR) |
| 1736 | ret = ath10k_monitor_create(ar); |
| 1737 | else |
| 1738 | ret = ath10k_monitor_destroy(ar); |
| 1739 | } |
| 1740 | |
| 1741 | mutex_unlock(&ar->conf_mutex); |
| 1742 | return ret; |
| 1743 | } |
| 1744 | |
| 1745 | /* |
| 1746 | * TODO: |
| 1747 | * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE, |
| 1748 | * because we will send mgmt frames without CCK. This requirement |
| 1749 | * for P2P_FIND/GO_NEG should be handled by checking CCK flag |
| 1750 | * in the TX packet. |
| 1751 | */ |
| 1752 | static int ath10k_add_interface(struct ieee80211_hw *hw, |
| 1753 | struct ieee80211_vif *vif) |
| 1754 | { |
| 1755 | struct ath10k *ar = hw->priv; |
| 1756 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1757 | enum wmi_sta_powersave_param param; |
| 1758 | int ret = 0; |
| 1759 | u32 value; |
| 1760 | int bit; |
| 1761 | |
| 1762 | mutex_lock(&ar->conf_mutex); |
| 1763 | |
| 1764 | arvif->ar = ar; |
| 1765 | arvif->vif = vif; |
| 1766 | |
| 1767 | if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) { |
| 1768 | ath10k_warn("Only one monitor interface allowed\n"); |
| 1769 | ret = -EBUSY; |
| 1770 | goto exit; |
| 1771 | } |
| 1772 | |
| 1773 | bit = ffs(ar->free_vdev_map); |
| 1774 | if (bit == 0) { |
| 1775 | ret = -EBUSY; |
| 1776 | goto exit; |
| 1777 | } |
| 1778 | |
| 1779 | arvif->vdev_id = bit - 1; |
| 1780 | arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE; |
| 1781 | ar->free_vdev_map &= ~(1 << arvif->vdev_id); |
| 1782 | |
| 1783 | if (ar->p2p) |
| 1784 | arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE; |
| 1785 | |
| 1786 | switch (vif->type) { |
| 1787 | case NL80211_IFTYPE_UNSPECIFIED: |
| 1788 | case NL80211_IFTYPE_STATION: |
| 1789 | arvif->vdev_type = WMI_VDEV_TYPE_STA; |
| 1790 | if (vif->p2p) |
| 1791 | arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT; |
| 1792 | break; |
| 1793 | case NL80211_IFTYPE_ADHOC: |
| 1794 | arvif->vdev_type = WMI_VDEV_TYPE_IBSS; |
| 1795 | break; |
| 1796 | case NL80211_IFTYPE_AP: |
| 1797 | arvif->vdev_type = WMI_VDEV_TYPE_AP; |
| 1798 | |
| 1799 | if (vif->p2p) |
| 1800 | arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO; |
| 1801 | break; |
| 1802 | case NL80211_IFTYPE_MONITOR: |
| 1803 | arvif->vdev_type = WMI_VDEV_TYPE_MONITOR; |
| 1804 | break; |
| 1805 | default: |
| 1806 | WARN_ON(1); |
| 1807 | break; |
| 1808 | } |
| 1809 | |
| 1810 | ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n", |
| 1811 | arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype); |
| 1812 | |
| 1813 | ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type, |
| 1814 | arvif->vdev_subtype, vif->addr); |
| 1815 | if (ret) { |
| 1816 | ath10k_warn("WMI vdev create failed: ret %d\n", ret); |
| 1817 | goto exit; |
| 1818 | } |
| 1819 | |
| 1820 | ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID, |
| 1821 | arvif->def_wep_key_index); |
| 1822 | if (ret) |
| 1823 | ath10k_warn("Failed to set default keyid: %d\n", ret); |
| 1824 | |
| 1825 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 1826 | WMI_VDEV_PARAM_TX_ENCAP_TYPE, |
| 1827 | ATH10K_HW_TXRX_NATIVE_WIFI); |
| 1828 | if (ret) |
| 1829 | ath10k_warn("Failed to set TX encap: %d\n", ret); |
| 1830 | |
| 1831 | if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| 1832 | ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr); |
| 1833 | if (ret) { |
| 1834 | ath10k_warn("Failed to create peer for AP: %d\n", ret); |
| 1835 | goto exit; |
| 1836 | } |
| 1837 | } |
| 1838 | |
| 1839 | if (arvif->vdev_type == WMI_VDEV_TYPE_STA) { |
| 1840 | param = WMI_STA_PS_PARAM_RX_WAKE_POLICY; |
| 1841 | value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; |
| 1842 | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| 1843 | param, value); |
| 1844 | if (ret) |
| 1845 | ath10k_warn("Failed to set RX wake policy: %d\n", ret); |
| 1846 | |
| 1847 | param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD; |
| 1848 | value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS; |
| 1849 | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| 1850 | param, value); |
| 1851 | if (ret) |
| 1852 | ath10k_warn("Failed to set TX wake thresh: %d\n", ret); |
| 1853 | |
| 1854 | param = WMI_STA_PS_PARAM_PSPOLL_COUNT; |
| 1855 | value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX; |
| 1856 | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| 1857 | param, value); |
| 1858 | if (ret) |
| 1859 | ath10k_warn("Failed to set PSPOLL count: %d\n", ret); |
| 1860 | } |
| 1861 | |
| 1862 | if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) |
| 1863 | ar->monitor_present = true; |
| 1864 | |
| 1865 | exit: |
| 1866 | mutex_unlock(&ar->conf_mutex); |
| 1867 | return ret; |
| 1868 | } |
| 1869 | |
| 1870 | static void ath10k_remove_interface(struct ieee80211_hw *hw, |
| 1871 | struct ieee80211_vif *vif) |
| 1872 | { |
| 1873 | struct ath10k *ar = hw->priv; |
| 1874 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1875 | int ret; |
| 1876 | |
| 1877 | mutex_lock(&ar->conf_mutex); |
| 1878 | |
| 1879 | ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id); |
| 1880 | |
| 1881 | ar->free_vdev_map |= 1 << (arvif->vdev_id); |
| 1882 | |
| 1883 | if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { |
| 1884 | ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr); |
| 1885 | if (ret) |
| 1886 | ath10k_warn("Failed to remove peer for AP: %d\n", ret); |
| 1887 | |
| 1888 | kfree(arvif->u.ap.noa_data); |
| 1889 | } |
| 1890 | |
| 1891 | ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id); |
| 1892 | if (ret) |
| 1893 | ath10k_warn("WMI vdev delete failed: %d\n", ret); |
| 1894 | |
| 1895 | if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) |
| 1896 | ar->monitor_present = false; |
| 1897 | |
| 1898 | ath10k_peer_cleanup(ar, arvif->vdev_id); |
| 1899 | |
| 1900 | mutex_unlock(&ar->conf_mutex); |
| 1901 | } |
| 1902 | |
| 1903 | /* |
| 1904 | * FIXME: Has to be verified. |
| 1905 | */ |
| 1906 | #define SUPPORTED_FILTERS \ |
| 1907 | (FIF_PROMISC_IN_BSS | \ |
| 1908 | FIF_ALLMULTI | \ |
| 1909 | FIF_CONTROL | \ |
| 1910 | FIF_PSPOLL | \ |
| 1911 | FIF_OTHER_BSS | \ |
| 1912 | FIF_BCN_PRBRESP_PROMISC | \ |
| 1913 | FIF_PROBE_REQ | \ |
| 1914 | FIF_FCSFAIL) |
| 1915 | |
| 1916 | static void ath10k_configure_filter(struct ieee80211_hw *hw, |
| 1917 | unsigned int changed_flags, |
| 1918 | unsigned int *total_flags, |
| 1919 | u64 multicast) |
| 1920 | { |
| 1921 | struct ath10k *ar = hw->priv; |
| 1922 | int ret; |
| 1923 | |
| 1924 | mutex_lock(&ar->conf_mutex); |
| 1925 | |
| 1926 | changed_flags &= SUPPORTED_FILTERS; |
| 1927 | *total_flags &= SUPPORTED_FILTERS; |
| 1928 | ar->filter_flags = *total_flags; |
| 1929 | |
| 1930 | if ((ar->filter_flags & FIF_PROMISC_IN_BSS) && |
| 1931 | !ar->monitor_enabled) { |
| 1932 | ret = ath10k_monitor_start(ar, ar->monitor_vdev_id); |
| 1933 | if (ret) |
| 1934 | ath10k_warn("Unable to start monitor mode\n"); |
| 1935 | else |
| 1936 | ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n"); |
| 1937 | } else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) && |
| 1938 | ar->monitor_enabled) { |
| 1939 | ret = ath10k_monitor_stop(ar); |
| 1940 | if (ret) |
| 1941 | ath10k_warn("Unable to stop monitor mode\n"); |
| 1942 | else |
| 1943 | ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n"); |
| 1944 | } |
| 1945 | |
| 1946 | mutex_unlock(&ar->conf_mutex); |
| 1947 | } |
| 1948 | |
| 1949 | static void ath10k_bss_info_changed(struct ieee80211_hw *hw, |
| 1950 | struct ieee80211_vif *vif, |
| 1951 | struct ieee80211_bss_conf *info, |
| 1952 | u32 changed) |
| 1953 | { |
| 1954 | struct ath10k *ar = hw->priv; |
| 1955 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 1956 | int ret = 0; |
| 1957 | |
| 1958 | mutex_lock(&ar->conf_mutex); |
| 1959 | |
| 1960 | if (changed & BSS_CHANGED_IBSS) |
| 1961 | ath10k_control_ibss(arvif, info, vif->addr); |
| 1962 | |
| 1963 | if (changed & BSS_CHANGED_BEACON_INT) { |
| 1964 | arvif->beacon_interval = info->beacon_int; |
| 1965 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 1966 | WMI_VDEV_PARAM_BEACON_INTERVAL, |
| 1967 | arvif->beacon_interval); |
| 1968 | if (ret) |
| 1969 | ath10k_warn("Failed to set beacon interval for VDEV: %d\n", |
| 1970 | arvif->vdev_id); |
| 1971 | else |
| 1972 | ath10k_dbg(ATH10K_DBG_MAC, |
| 1973 | "Beacon interval: %d set for VDEV: %d\n", |
| 1974 | arvif->beacon_interval, arvif->vdev_id); |
| 1975 | } |
| 1976 | |
| 1977 | if (changed & BSS_CHANGED_BEACON) { |
| 1978 | ret = ath10k_wmi_pdev_set_param(ar, |
| 1979 | WMI_PDEV_PARAM_BEACON_TX_MODE, |
| 1980 | WMI_BEACON_STAGGERED_MODE); |
| 1981 | if (ret) |
| 1982 | ath10k_warn("Failed to set beacon mode for VDEV: %d\n", |
| 1983 | arvif->vdev_id); |
| 1984 | else |
| 1985 | ath10k_dbg(ATH10K_DBG_MAC, |
| 1986 | "Set staggered beacon mode for VDEV: %d\n", |
| 1987 | arvif->vdev_id); |
| 1988 | } |
| 1989 | |
John W. Linville | b70727e8 | 2013-06-13 13:34:29 -0400 | [diff] [blame] | 1990 | if (changed & BSS_CHANGED_BEACON_INFO) { |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1991 | arvif->dtim_period = info->dtim_period; |
| 1992 | |
| 1993 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 1994 | WMI_VDEV_PARAM_DTIM_PERIOD, |
| 1995 | arvif->dtim_period); |
| 1996 | if (ret) |
| 1997 | ath10k_warn("Failed to set dtim period for VDEV: %d\n", |
| 1998 | arvif->vdev_id); |
| 1999 | else |
| 2000 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2001 | "Set dtim period: %d for VDEV: %d\n", |
| 2002 | arvif->dtim_period, arvif->vdev_id); |
| 2003 | } |
| 2004 | |
| 2005 | if (changed & BSS_CHANGED_SSID && |
| 2006 | vif->type == NL80211_IFTYPE_AP) { |
| 2007 | arvif->u.ap.ssid_len = info->ssid_len; |
| 2008 | if (info->ssid_len) |
| 2009 | memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len); |
| 2010 | arvif->u.ap.hidden_ssid = info->hidden_ssid; |
| 2011 | } |
| 2012 | |
| 2013 | if (changed & BSS_CHANGED_BSSID) { |
| 2014 | if (!is_zero_ether_addr(info->bssid)) { |
| 2015 | ret = ath10k_peer_create(ar, arvif->vdev_id, |
| 2016 | info->bssid); |
| 2017 | if (ret) |
| 2018 | ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", |
| 2019 | info->bssid, arvif->vdev_id); |
| 2020 | else |
| 2021 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2022 | "Added peer: %pM for VDEV: %d\n", |
| 2023 | info->bssid, arvif->vdev_id); |
| 2024 | |
| 2025 | |
| 2026 | if (vif->type == NL80211_IFTYPE_STATION) { |
| 2027 | /* |
| 2028 | * this is never erased as we it for crypto key |
| 2029 | * clearing; this is FW requirement |
| 2030 | */ |
| 2031 | memcpy(arvif->u.sta.bssid, info->bssid, |
| 2032 | ETH_ALEN); |
| 2033 | |
| 2034 | ret = ath10k_vdev_start(arvif); |
| 2035 | if (!ret) |
| 2036 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2037 | "VDEV: %d started with BSSID: %pM\n", |
| 2038 | arvif->vdev_id, info->bssid); |
| 2039 | } |
| 2040 | |
| 2041 | /* |
| 2042 | * Mac80211 does not keep IBSS bssid when leaving IBSS, |
| 2043 | * so driver need to store it. It is needed when leaving |
| 2044 | * IBSS in order to remove BSSID peer. |
| 2045 | */ |
| 2046 | if (vif->type == NL80211_IFTYPE_ADHOC) |
| 2047 | memcpy(arvif->u.ibss.bssid, info->bssid, |
| 2048 | ETH_ALEN); |
| 2049 | } |
| 2050 | } |
| 2051 | |
| 2052 | if (changed & BSS_CHANGED_BEACON_ENABLED) |
| 2053 | ath10k_control_beaconing(arvif, info); |
| 2054 | |
| 2055 | if (changed & BSS_CHANGED_ERP_CTS_PROT) { |
| 2056 | u32 cts_prot; |
| 2057 | if (info->use_cts_prot) |
| 2058 | cts_prot = 1; |
| 2059 | else |
| 2060 | cts_prot = 0; |
| 2061 | |
| 2062 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 2063 | WMI_VDEV_PARAM_ENABLE_RTSCTS, |
| 2064 | cts_prot); |
| 2065 | if (ret) |
| 2066 | ath10k_warn("Failed to set CTS prot for VDEV: %d\n", |
| 2067 | arvif->vdev_id); |
| 2068 | else |
| 2069 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2070 | "Set CTS prot: %d for VDEV: %d\n", |
| 2071 | cts_prot, arvif->vdev_id); |
| 2072 | } |
| 2073 | |
| 2074 | if (changed & BSS_CHANGED_ERP_SLOT) { |
| 2075 | u32 slottime; |
| 2076 | if (info->use_short_slot) |
| 2077 | slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */ |
| 2078 | |
| 2079 | else |
| 2080 | slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */ |
| 2081 | |
| 2082 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 2083 | WMI_VDEV_PARAM_SLOT_TIME, |
| 2084 | slottime); |
| 2085 | if (ret) |
| 2086 | ath10k_warn("Failed to set erp slot for VDEV: %d\n", |
| 2087 | arvif->vdev_id); |
| 2088 | else |
| 2089 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2090 | "Set slottime: %d for VDEV: %d\n", |
| 2091 | slottime, arvif->vdev_id); |
| 2092 | } |
| 2093 | |
| 2094 | if (changed & BSS_CHANGED_ERP_PREAMBLE) { |
| 2095 | u32 preamble; |
| 2096 | if (info->use_short_preamble) |
| 2097 | preamble = WMI_VDEV_PREAMBLE_SHORT; |
| 2098 | else |
| 2099 | preamble = WMI_VDEV_PREAMBLE_LONG; |
| 2100 | |
| 2101 | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, |
| 2102 | WMI_VDEV_PARAM_PREAMBLE, |
| 2103 | preamble); |
| 2104 | if (ret) |
| 2105 | ath10k_warn("Failed to set preamble for VDEV: %d\n", |
| 2106 | arvif->vdev_id); |
| 2107 | else |
| 2108 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2109 | "Set preamble: %d for VDEV: %d\n", |
| 2110 | preamble, arvif->vdev_id); |
| 2111 | } |
| 2112 | |
| 2113 | if (changed & BSS_CHANGED_ASSOC) { |
| 2114 | if (info->assoc) |
| 2115 | ath10k_bss_assoc(hw, vif, info); |
| 2116 | } |
| 2117 | |
| 2118 | mutex_unlock(&ar->conf_mutex); |
| 2119 | } |
| 2120 | |
| 2121 | static int ath10k_hw_scan(struct ieee80211_hw *hw, |
| 2122 | struct ieee80211_vif *vif, |
| 2123 | struct cfg80211_scan_request *req) |
| 2124 | { |
| 2125 | struct ath10k *ar = hw->priv; |
| 2126 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2127 | struct wmi_start_scan_arg arg; |
| 2128 | int ret = 0; |
| 2129 | int i; |
| 2130 | |
| 2131 | mutex_lock(&ar->conf_mutex); |
| 2132 | |
| 2133 | spin_lock_bh(&ar->data_lock); |
| 2134 | if (ar->scan.in_progress) { |
| 2135 | spin_unlock_bh(&ar->data_lock); |
| 2136 | ret = -EBUSY; |
| 2137 | goto exit; |
| 2138 | } |
| 2139 | |
| 2140 | INIT_COMPLETION(ar->scan.started); |
| 2141 | INIT_COMPLETION(ar->scan.completed); |
| 2142 | ar->scan.in_progress = true; |
| 2143 | ar->scan.aborting = false; |
| 2144 | ar->scan.is_roc = false; |
| 2145 | ar->scan.vdev_id = arvif->vdev_id; |
| 2146 | spin_unlock_bh(&ar->data_lock); |
| 2147 | |
| 2148 | memset(&arg, 0, sizeof(arg)); |
| 2149 | ath10k_wmi_start_scan_init(ar, &arg); |
| 2150 | arg.vdev_id = arvif->vdev_id; |
| 2151 | arg.scan_id = ATH10K_SCAN_ID; |
| 2152 | |
| 2153 | if (!req->no_cck) |
| 2154 | arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES; |
| 2155 | |
| 2156 | if (req->ie_len) { |
| 2157 | arg.ie_len = req->ie_len; |
| 2158 | memcpy(arg.ie, req->ie, arg.ie_len); |
| 2159 | } |
| 2160 | |
| 2161 | if (req->n_ssids) { |
| 2162 | arg.n_ssids = req->n_ssids; |
| 2163 | for (i = 0; i < arg.n_ssids; i++) { |
| 2164 | arg.ssids[i].len = req->ssids[i].ssid_len; |
| 2165 | arg.ssids[i].ssid = req->ssids[i].ssid; |
| 2166 | } |
| 2167 | } |
| 2168 | |
| 2169 | if (req->n_channels) { |
| 2170 | arg.n_channels = req->n_channels; |
| 2171 | for (i = 0; i < arg.n_channels; i++) |
| 2172 | arg.channels[i] = req->channels[i]->center_freq; |
| 2173 | } |
| 2174 | |
| 2175 | ret = ath10k_start_scan(ar, &arg); |
| 2176 | if (ret) { |
| 2177 | ath10k_warn("could not start hw scan (%d)\n", ret); |
| 2178 | spin_lock_bh(&ar->data_lock); |
| 2179 | ar->scan.in_progress = false; |
| 2180 | spin_unlock_bh(&ar->data_lock); |
| 2181 | } |
| 2182 | |
| 2183 | exit: |
| 2184 | mutex_unlock(&ar->conf_mutex); |
| 2185 | return ret; |
| 2186 | } |
| 2187 | |
| 2188 | static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw, |
| 2189 | struct ieee80211_vif *vif) |
| 2190 | { |
| 2191 | struct ath10k *ar = hw->priv; |
| 2192 | int ret; |
| 2193 | |
| 2194 | mutex_lock(&ar->conf_mutex); |
| 2195 | ret = ath10k_abort_scan(ar); |
| 2196 | if (ret) { |
| 2197 | ath10k_warn("couldn't abort scan (%d). forcefully sending scan completion to mac80211\n", |
| 2198 | ret); |
| 2199 | ieee80211_scan_completed(hw, 1 /* aborted */); |
| 2200 | } |
| 2201 | mutex_unlock(&ar->conf_mutex); |
| 2202 | } |
| 2203 | |
| 2204 | static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| 2205 | struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| 2206 | struct ieee80211_key_conf *key) |
| 2207 | { |
| 2208 | struct ath10k *ar = hw->priv; |
| 2209 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2210 | struct ath10k_peer *peer; |
| 2211 | const u8 *peer_addr; |
| 2212 | bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| 2213 | key->cipher == WLAN_CIPHER_SUITE_WEP104; |
| 2214 | int ret = 0; |
| 2215 | |
| 2216 | if (key->keyidx > WMI_MAX_KEY_INDEX) |
| 2217 | return -ENOSPC; |
| 2218 | |
| 2219 | mutex_lock(&ar->conf_mutex); |
| 2220 | |
| 2221 | if (sta) |
| 2222 | peer_addr = sta->addr; |
| 2223 | else if (arvif->vdev_type == WMI_VDEV_TYPE_STA) |
| 2224 | peer_addr = vif->bss_conf.bssid; |
| 2225 | else |
| 2226 | peer_addr = vif->addr; |
| 2227 | |
| 2228 | key->hw_key_idx = key->keyidx; |
| 2229 | |
| 2230 | /* the peer should not disappear in mid-way (unless FW goes awry) since |
| 2231 | * we already hold conf_mutex. we just make sure its there now. */ |
| 2232 | spin_lock_bh(&ar->data_lock); |
| 2233 | peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); |
| 2234 | spin_unlock_bh(&ar->data_lock); |
| 2235 | |
| 2236 | if (!peer) { |
| 2237 | if (cmd == SET_KEY) { |
| 2238 | ath10k_warn("cannot install key for non-existent peer %pM\n", |
| 2239 | peer_addr); |
| 2240 | ret = -EOPNOTSUPP; |
| 2241 | goto exit; |
| 2242 | } else { |
| 2243 | /* if the peer doesn't exist there is no key to disable |
| 2244 | * anymore */ |
| 2245 | goto exit; |
| 2246 | } |
| 2247 | } |
| 2248 | |
| 2249 | if (is_wep) { |
| 2250 | if (cmd == SET_KEY) |
| 2251 | arvif->wep_keys[key->keyidx] = key; |
| 2252 | else |
| 2253 | arvif->wep_keys[key->keyidx] = NULL; |
| 2254 | |
| 2255 | if (cmd == DISABLE_KEY) |
| 2256 | ath10k_clear_vdev_key(arvif, key); |
| 2257 | } |
| 2258 | |
| 2259 | ret = ath10k_install_key(arvif, key, cmd, peer_addr); |
| 2260 | if (ret) { |
| 2261 | ath10k_warn("ath10k_install_key failed (%d)\n", ret); |
| 2262 | goto exit; |
| 2263 | } |
| 2264 | |
| 2265 | spin_lock_bh(&ar->data_lock); |
| 2266 | peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); |
| 2267 | if (peer && cmd == SET_KEY) |
| 2268 | peer->keys[key->keyidx] = key; |
| 2269 | else if (peer && cmd == DISABLE_KEY) |
| 2270 | peer->keys[key->keyidx] = NULL; |
| 2271 | else if (peer == NULL) |
| 2272 | /* impossible unless FW goes crazy */ |
| 2273 | ath10k_warn("peer %pM disappeared!\n", peer_addr); |
| 2274 | spin_unlock_bh(&ar->data_lock); |
| 2275 | |
| 2276 | exit: |
| 2277 | mutex_unlock(&ar->conf_mutex); |
| 2278 | return ret; |
| 2279 | } |
| 2280 | |
| 2281 | static int ath10k_sta_state(struct ieee80211_hw *hw, |
| 2282 | struct ieee80211_vif *vif, |
| 2283 | struct ieee80211_sta *sta, |
| 2284 | enum ieee80211_sta_state old_state, |
| 2285 | enum ieee80211_sta_state new_state) |
| 2286 | { |
| 2287 | struct ath10k *ar = hw->priv; |
| 2288 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2289 | int ret = 0; |
| 2290 | |
| 2291 | mutex_lock(&ar->conf_mutex); |
| 2292 | |
| 2293 | if (old_state == IEEE80211_STA_NOTEXIST && |
| 2294 | new_state == IEEE80211_STA_NONE && |
| 2295 | vif->type != NL80211_IFTYPE_STATION) { |
| 2296 | /* |
| 2297 | * New station addition. |
| 2298 | */ |
| 2299 | ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr); |
| 2300 | if (ret) |
| 2301 | ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", |
| 2302 | sta->addr, arvif->vdev_id); |
| 2303 | else |
| 2304 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2305 | "Added peer: %pM for VDEV: %d\n", |
| 2306 | sta->addr, arvif->vdev_id); |
| 2307 | } else if ((old_state == IEEE80211_STA_NONE && |
| 2308 | new_state == IEEE80211_STA_NOTEXIST)) { |
| 2309 | /* |
| 2310 | * Existing station deletion. |
| 2311 | */ |
| 2312 | ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); |
| 2313 | if (ret) |
| 2314 | ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n", |
| 2315 | sta->addr, arvif->vdev_id); |
| 2316 | else |
| 2317 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2318 | "Removed peer: %pM for VDEV: %d\n", |
| 2319 | sta->addr, arvif->vdev_id); |
| 2320 | |
| 2321 | if (vif->type == NL80211_IFTYPE_STATION) |
| 2322 | ath10k_bss_disassoc(hw, vif); |
| 2323 | } else if (old_state == IEEE80211_STA_AUTH && |
| 2324 | new_state == IEEE80211_STA_ASSOC && |
| 2325 | (vif->type == NL80211_IFTYPE_AP || |
| 2326 | vif->type == NL80211_IFTYPE_ADHOC)) { |
| 2327 | /* |
| 2328 | * New association. |
| 2329 | */ |
| 2330 | ret = ath10k_station_assoc(ar, arvif, sta); |
| 2331 | if (ret) |
| 2332 | ath10k_warn("Failed to associate station: %pM\n", |
| 2333 | sta->addr); |
| 2334 | else |
| 2335 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2336 | "Station %pM moved to assoc state\n", |
| 2337 | sta->addr); |
| 2338 | } else if (old_state == IEEE80211_STA_ASSOC && |
| 2339 | new_state == IEEE80211_STA_AUTH && |
| 2340 | (vif->type == NL80211_IFTYPE_AP || |
| 2341 | vif->type == NL80211_IFTYPE_ADHOC)) { |
| 2342 | /* |
| 2343 | * Disassociation. |
| 2344 | */ |
| 2345 | ret = ath10k_station_disassoc(ar, arvif, sta); |
| 2346 | if (ret) |
| 2347 | ath10k_warn("Failed to disassociate station: %pM\n", |
| 2348 | sta->addr); |
| 2349 | else |
| 2350 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2351 | "Station %pM moved to disassociated state\n", |
| 2352 | sta->addr); |
| 2353 | } |
| 2354 | |
| 2355 | mutex_unlock(&ar->conf_mutex); |
| 2356 | return ret; |
| 2357 | } |
| 2358 | |
| 2359 | static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif, |
| 2360 | u16 ac, bool enable) |
| 2361 | { |
| 2362 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2363 | u32 value = 0; |
| 2364 | int ret = 0; |
| 2365 | |
| 2366 | if (arvif->vdev_type != WMI_VDEV_TYPE_STA) |
| 2367 | return 0; |
| 2368 | |
| 2369 | switch (ac) { |
| 2370 | case IEEE80211_AC_VO: |
| 2371 | value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN | |
| 2372 | WMI_STA_PS_UAPSD_AC3_TRIGGER_EN; |
| 2373 | break; |
| 2374 | case IEEE80211_AC_VI: |
| 2375 | value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN | |
| 2376 | WMI_STA_PS_UAPSD_AC2_TRIGGER_EN; |
| 2377 | break; |
| 2378 | case IEEE80211_AC_BE: |
| 2379 | value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN | |
| 2380 | WMI_STA_PS_UAPSD_AC1_TRIGGER_EN; |
| 2381 | break; |
| 2382 | case IEEE80211_AC_BK: |
| 2383 | value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN | |
| 2384 | WMI_STA_PS_UAPSD_AC0_TRIGGER_EN; |
| 2385 | break; |
| 2386 | } |
| 2387 | |
| 2388 | if (enable) |
| 2389 | arvif->u.sta.uapsd |= value; |
| 2390 | else |
| 2391 | arvif->u.sta.uapsd &= ~value; |
| 2392 | |
| 2393 | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| 2394 | WMI_STA_PS_PARAM_UAPSD, |
| 2395 | arvif->u.sta.uapsd); |
| 2396 | if (ret) { |
| 2397 | ath10k_warn("could not set uapsd params %d\n", ret); |
| 2398 | goto exit; |
| 2399 | } |
| 2400 | |
| 2401 | if (arvif->u.sta.uapsd) |
| 2402 | value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; |
| 2403 | else |
| 2404 | value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; |
| 2405 | |
| 2406 | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, |
| 2407 | WMI_STA_PS_PARAM_RX_WAKE_POLICY, |
| 2408 | value); |
| 2409 | if (ret) |
| 2410 | ath10k_warn("could not set rx wake param %d\n", ret); |
| 2411 | |
| 2412 | exit: |
| 2413 | return ret; |
| 2414 | } |
| 2415 | |
| 2416 | static int ath10k_conf_tx(struct ieee80211_hw *hw, |
| 2417 | struct ieee80211_vif *vif, u16 ac, |
| 2418 | const struct ieee80211_tx_queue_params *params) |
| 2419 | { |
| 2420 | struct ath10k *ar = hw->priv; |
| 2421 | struct wmi_wmm_params_arg *p = NULL; |
| 2422 | int ret; |
| 2423 | |
| 2424 | mutex_lock(&ar->conf_mutex); |
| 2425 | |
| 2426 | switch (ac) { |
| 2427 | case IEEE80211_AC_VO: |
| 2428 | p = &ar->wmm_params.ac_vo; |
| 2429 | break; |
| 2430 | case IEEE80211_AC_VI: |
| 2431 | p = &ar->wmm_params.ac_vi; |
| 2432 | break; |
| 2433 | case IEEE80211_AC_BE: |
| 2434 | p = &ar->wmm_params.ac_be; |
| 2435 | break; |
| 2436 | case IEEE80211_AC_BK: |
| 2437 | p = &ar->wmm_params.ac_bk; |
| 2438 | break; |
| 2439 | } |
| 2440 | |
| 2441 | if (WARN_ON(!p)) { |
| 2442 | ret = -EINVAL; |
| 2443 | goto exit; |
| 2444 | } |
| 2445 | |
| 2446 | p->cwmin = params->cw_min; |
| 2447 | p->cwmax = params->cw_max; |
| 2448 | p->aifs = params->aifs; |
| 2449 | |
| 2450 | /* |
| 2451 | * The channel time duration programmed in the HW is in absolute |
| 2452 | * microseconds, while mac80211 gives the txop in units of |
| 2453 | * 32 microseconds. |
| 2454 | */ |
| 2455 | p->txop = params->txop * 32; |
| 2456 | |
| 2457 | /* FIXME: FW accepts wmm params per hw, not per vif */ |
| 2458 | ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params); |
| 2459 | if (ret) { |
| 2460 | ath10k_warn("could not set wmm params %d\n", ret); |
| 2461 | goto exit; |
| 2462 | } |
| 2463 | |
| 2464 | ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd); |
| 2465 | if (ret) |
| 2466 | ath10k_warn("could not set sta uapsd %d\n", ret); |
| 2467 | |
| 2468 | exit: |
| 2469 | mutex_unlock(&ar->conf_mutex); |
| 2470 | return ret; |
| 2471 | } |
| 2472 | |
| 2473 | #define ATH10K_ROC_TIMEOUT_HZ (2*HZ) |
| 2474 | |
| 2475 | static int ath10k_remain_on_channel(struct ieee80211_hw *hw, |
| 2476 | struct ieee80211_vif *vif, |
| 2477 | struct ieee80211_channel *chan, |
| 2478 | int duration, |
| 2479 | enum ieee80211_roc_type type) |
| 2480 | { |
| 2481 | struct ath10k *ar = hw->priv; |
| 2482 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2483 | struct wmi_start_scan_arg arg; |
| 2484 | int ret; |
| 2485 | |
| 2486 | mutex_lock(&ar->conf_mutex); |
| 2487 | |
| 2488 | spin_lock_bh(&ar->data_lock); |
| 2489 | if (ar->scan.in_progress) { |
| 2490 | spin_unlock_bh(&ar->data_lock); |
| 2491 | ret = -EBUSY; |
| 2492 | goto exit; |
| 2493 | } |
| 2494 | |
| 2495 | INIT_COMPLETION(ar->scan.started); |
| 2496 | INIT_COMPLETION(ar->scan.completed); |
| 2497 | INIT_COMPLETION(ar->scan.on_channel); |
| 2498 | ar->scan.in_progress = true; |
| 2499 | ar->scan.aborting = false; |
| 2500 | ar->scan.is_roc = true; |
| 2501 | ar->scan.vdev_id = arvif->vdev_id; |
| 2502 | ar->scan.roc_freq = chan->center_freq; |
| 2503 | spin_unlock_bh(&ar->data_lock); |
| 2504 | |
| 2505 | memset(&arg, 0, sizeof(arg)); |
| 2506 | ath10k_wmi_start_scan_init(ar, &arg); |
| 2507 | arg.vdev_id = arvif->vdev_id; |
| 2508 | arg.scan_id = ATH10K_SCAN_ID; |
| 2509 | arg.n_channels = 1; |
| 2510 | arg.channels[0] = chan->center_freq; |
| 2511 | arg.dwell_time_active = duration; |
| 2512 | arg.dwell_time_passive = duration; |
| 2513 | arg.max_scan_time = 2 * duration; |
| 2514 | arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; |
| 2515 | arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; |
| 2516 | |
| 2517 | ret = ath10k_start_scan(ar, &arg); |
| 2518 | if (ret) { |
| 2519 | ath10k_warn("could not start roc scan (%d)\n", ret); |
| 2520 | spin_lock_bh(&ar->data_lock); |
| 2521 | ar->scan.in_progress = false; |
| 2522 | spin_unlock_bh(&ar->data_lock); |
| 2523 | goto exit; |
| 2524 | } |
| 2525 | |
| 2526 | ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ); |
| 2527 | if (ret == 0) { |
| 2528 | ath10k_warn("could not switch to channel for roc scan\n"); |
| 2529 | ath10k_abort_scan(ar); |
| 2530 | ret = -ETIMEDOUT; |
| 2531 | goto exit; |
| 2532 | } |
| 2533 | |
| 2534 | ret = 0; |
| 2535 | exit: |
| 2536 | mutex_unlock(&ar->conf_mutex); |
| 2537 | return ret; |
| 2538 | } |
| 2539 | |
| 2540 | static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw) |
| 2541 | { |
| 2542 | struct ath10k *ar = hw->priv; |
| 2543 | |
| 2544 | mutex_lock(&ar->conf_mutex); |
| 2545 | ath10k_abort_scan(ar); |
| 2546 | mutex_unlock(&ar->conf_mutex); |
| 2547 | |
| 2548 | return 0; |
| 2549 | } |
| 2550 | |
| 2551 | /* |
| 2552 | * Both RTS and Fragmentation threshold are interface-specific |
| 2553 | * in ath10k, but device-specific in mac80211. |
| 2554 | */ |
| 2555 | static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| 2556 | { |
| 2557 | struct ath10k_generic_iter *ar_iter = data; |
| 2558 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2559 | u32 rts = ar_iter->ar->hw->wiphy->rts_threshold; |
| 2560 | |
| 2561 | rts = min_t(u32, rts, ATH10K_RTS_MAX); |
| 2562 | |
| 2563 | ar_iter->ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id, |
| 2564 | WMI_VDEV_PARAM_RTS_THRESHOLD, |
| 2565 | rts); |
| 2566 | if (ar_iter->ret) |
| 2567 | ath10k_warn("Failed to set RTS threshold for VDEV: %d\n", |
| 2568 | arvif->vdev_id); |
| 2569 | else |
| 2570 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2571 | "Set RTS threshold: %d for VDEV: %d\n", |
| 2572 | rts, arvif->vdev_id); |
| 2573 | } |
| 2574 | |
| 2575 | static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) |
| 2576 | { |
| 2577 | struct ath10k_generic_iter ar_iter; |
| 2578 | struct ath10k *ar = hw->priv; |
| 2579 | |
| 2580 | memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter)); |
| 2581 | ar_iter.ar = ar; |
| 2582 | |
| 2583 | mutex_lock(&ar->conf_mutex); |
Michal Kazior | 80c78c6 | 2013-07-05 16:15:03 +0300 | [diff] [blame^] | 2584 | ieee80211_iterate_active_interfaces_atomic( |
| 2585 | hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| 2586 | ath10k_set_rts_iter, &ar_iter); |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 2587 | mutex_unlock(&ar->conf_mutex); |
| 2588 | |
| 2589 | return ar_iter.ret; |
| 2590 | } |
| 2591 | |
| 2592 | static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| 2593 | { |
| 2594 | struct ath10k_generic_iter *ar_iter = data; |
| 2595 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2596 | u32 frag = ar_iter->ar->hw->wiphy->frag_threshold; |
| 2597 | int ret; |
| 2598 | |
| 2599 | frag = clamp_t(u32, frag, |
| 2600 | ATH10K_FRAGMT_THRESHOLD_MIN, |
| 2601 | ATH10K_FRAGMT_THRESHOLD_MAX); |
| 2602 | |
| 2603 | ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id, |
| 2604 | WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, |
| 2605 | frag); |
| 2606 | |
| 2607 | ar_iter->ret = ret; |
| 2608 | if (ar_iter->ret) |
| 2609 | ath10k_warn("Failed to set frag threshold for VDEV: %d\n", |
| 2610 | arvif->vdev_id); |
| 2611 | else |
| 2612 | ath10k_dbg(ATH10K_DBG_MAC, |
| 2613 | "Set frag threshold: %d for VDEV: %d\n", |
| 2614 | frag, arvif->vdev_id); |
| 2615 | } |
| 2616 | |
| 2617 | static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value) |
| 2618 | { |
| 2619 | struct ath10k_generic_iter ar_iter; |
| 2620 | struct ath10k *ar = hw->priv; |
| 2621 | |
| 2622 | memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter)); |
| 2623 | ar_iter.ar = ar; |
| 2624 | |
| 2625 | mutex_lock(&ar->conf_mutex); |
Michal Kazior | 80c78c6 | 2013-07-05 16:15:03 +0300 | [diff] [blame^] | 2626 | ieee80211_iterate_active_interfaces_atomic( |
| 2627 | hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| 2628 | ath10k_set_frag_iter, &ar_iter); |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 2629 | mutex_unlock(&ar->conf_mutex); |
| 2630 | |
| 2631 | return ar_iter.ret; |
| 2632 | } |
| 2633 | |
| 2634 | static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop) |
| 2635 | { |
| 2636 | struct ath10k *ar = hw->priv; |
| 2637 | int ret; |
| 2638 | |
| 2639 | /* mac80211 doesn't care if we really xmit queued frames or not |
| 2640 | * we'll collect those frames either way if we stop/delete vdevs */ |
| 2641 | if (drop) |
| 2642 | return; |
| 2643 | |
| 2644 | ret = wait_event_timeout(ar->htt->empty_tx_wq, ({ |
| 2645 | bool empty; |
| 2646 | spin_lock_bh(&ar->htt->tx_lock); |
| 2647 | empty = bitmap_empty(ar->htt->used_msdu_ids, |
| 2648 | ar->htt->max_num_pending_tx); |
| 2649 | spin_unlock_bh(&ar->htt->tx_lock); |
| 2650 | (empty); |
| 2651 | }), ATH10K_FLUSH_TIMEOUT_HZ); |
| 2652 | if (ret <= 0) |
| 2653 | ath10k_warn("tx not flushed\n"); |
| 2654 | } |
| 2655 | |
| 2656 | /* TODO: Implement this function properly |
| 2657 | * For now it is needed to reply to Probe Requests in IBSS mode. |
| 2658 | * Propably we need this information from FW. |
| 2659 | */ |
| 2660 | static int ath10k_tx_last_beacon(struct ieee80211_hw *hw) |
| 2661 | { |
| 2662 | return 1; |
| 2663 | } |
| 2664 | |
| 2665 | static const struct ieee80211_ops ath10k_ops = { |
| 2666 | .tx = ath10k_tx, |
| 2667 | .start = ath10k_start, |
| 2668 | .stop = ath10k_stop, |
| 2669 | .config = ath10k_config, |
| 2670 | .add_interface = ath10k_add_interface, |
| 2671 | .remove_interface = ath10k_remove_interface, |
| 2672 | .configure_filter = ath10k_configure_filter, |
| 2673 | .bss_info_changed = ath10k_bss_info_changed, |
| 2674 | .hw_scan = ath10k_hw_scan, |
| 2675 | .cancel_hw_scan = ath10k_cancel_hw_scan, |
| 2676 | .set_key = ath10k_set_key, |
| 2677 | .sta_state = ath10k_sta_state, |
| 2678 | .conf_tx = ath10k_conf_tx, |
| 2679 | .remain_on_channel = ath10k_remain_on_channel, |
| 2680 | .cancel_remain_on_channel = ath10k_cancel_remain_on_channel, |
| 2681 | .set_rts_threshold = ath10k_set_rts_threshold, |
| 2682 | .set_frag_threshold = ath10k_set_frag_threshold, |
| 2683 | .flush = ath10k_flush, |
| 2684 | .tx_last_beacon = ath10k_tx_last_beacon, |
| 2685 | }; |
| 2686 | |
| 2687 | #define RATETAB_ENT(_rate, _rateid, _flags) { \ |
| 2688 | .bitrate = (_rate), \ |
| 2689 | .flags = (_flags), \ |
| 2690 | .hw_value = (_rateid), \ |
| 2691 | } |
| 2692 | |
| 2693 | #define CHAN2G(_channel, _freq, _flags) { \ |
| 2694 | .band = IEEE80211_BAND_2GHZ, \ |
| 2695 | .hw_value = (_channel), \ |
| 2696 | .center_freq = (_freq), \ |
| 2697 | .flags = (_flags), \ |
| 2698 | .max_antenna_gain = 0, \ |
| 2699 | .max_power = 30, \ |
| 2700 | } |
| 2701 | |
| 2702 | #define CHAN5G(_channel, _freq, _flags) { \ |
| 2703 | .band = IEEE80211_BAND_5GHZ, \ |
| 2704 | .hw_value = (_channel), \ |
| 2705 | .center_freq = (_freq), \ |
| 2706 | .flags = (_flags), \ |
| 2707 | .max_antenna_gain = 0, \ |
| 2708 | .max_power = 30, \ |
| 2709 | } |
| 2710 | |
| 2711 | static const struct ieee80211_channel ath10k_2ghz_channels[] = { |
| 2712 | CHAN2G(1, 2412, 0), |
| 2713 | CHAN2G(2, 2417, 0), |
| 2714 | CHAN2G(3, 2422, 0), |
| 2715 | CHAN2G(4, 2427, 0), |
| 2716 | CHAN2G(5, 2432, 0), |
| 2717 | CHAN2G(6, 2437, 0), |
| 2718 | CHAN2G(7, 2442, 0), |
| 2719 | CHAN2G(8, 2447, 0), |
| 2720 | CHAN2G(9, 2452, 0), |
| 2721 | CHAN2G(10, 2457, 0), |
| 2722 | CHAN2G(11, 2462, 0), |
| 2723 | CHAN2G(12, 2467, 0), |
| 2724 | CHAN2G(13, 2472, 0), |
| 2725 | CHAN2G(14, 2484, 0), |
| 2726 | }; |
| 2727 | |
| 2728 | static const struct ieee80211_channel ath10k_5ghz_channels[] = { |
Michal Kazior | 429ff56 | 2013-06-26 08:54:54 +0200 | [diff] [blame] | 2729 | CHAN5G(36, 5180, 0), |
| 2730 | CHAN5G(40, 5200, 0), |
| 2731 | CHAN5G(44, 5220, 0), |
| 2732 | CHAN5G(48, 5240, 0), |
| 2733 | CHAN5G(52, 5260, 0), |
| 2734 | CHAN5G(56, 5280, 0), |
| 2735 | CHAN5G(60, 5300, 0), |
| 2736 | CHAN5G(64, 5320, 0), |
| 2737 | CHAN5G(100, 5500, 0), |
| 2738 | CHAN5G(104, 5520, 0), |
| 2739 | CHAN5G(108, 5540, 0), |
| 2740 | CHAN5G(112, 5560, 0), |
| 2741 | CHAN5G(116, 5580, 0), |
| 2742 | CHAN5G(120, 5600, 0), |
| 2743 | CHAN5G(124, 5620, 0), |
| 2744 | CHAN5G(128, 5640, 0), |
| 2745 | CHAN5G(132, 5660, 0), |
| 2746 | CHAN5G(136, 5680, 0), |
| 2747 | CHAN5G(140, 5700, 0), |
| 2748 | CHAN5G(149, 5745, 0), |
| 2749 | CHAN5G(153, 5765, 0), |
| 2750 | CHAN5G(157, 5785, 0), |
| 2751 | CHAN5G(161, 5805, 0), |
| 2752 | CHAN5G(165, 5825, 0), |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 2753 | }; |
| 2754 | |
| 2755 | static struct ieee80211_rate ath10k_rates[] = { |
| 2756 | /* CCK */ |
| 2757 | RATETAB_ENT(10, 0x82, 0), |
| 2758 | RATETAB_ENT(20, 0x84, 0), |
| 2759 | RATETAB_ENT(55, 0x8b, 0), |
| 2760 | RATETAB_ENT(110, 0x96, 0), |
| 2761 | /* OFDM */ |
| 2762 | RATETAB_ENT(60, 0x0c, 0), |
| 2763 | RATETAB_ENT(90, 0x12, 0), |
| 2764 | RATETAB_ENT(120, 0x18, 0), |
| 2765 | RATETAB_ENT(180, 0x24, 0), |
| 2766 | RATETAB_ENT(240, 0x30, 0), |
| 2767 | RATETAB_ENT(360, 0x48, 0), |
| 2768 | RATETAB_ENT(480, 0x60, 0), |
| 2769 | RATETAB_ENT(540, 0x6c, 0), |
| 2770 | }; |
| 2771 | |
| 2772 | #define ath10k_a_rates (ath10k_rates + 4) |
| 2773 | #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4) |
| 2774 | #define ath10k_g_rates (ath10k_rates + 0) |
| 2775 | #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates)) |
| 2776 | |
| 2777 | struct ath10k *ath10k_mac_create(void) |
| 2778 | { |
| 2779 | struct ieee80211_hw *hw; |
| 2780 | struct ath10k *ar; |
| 2781 | |
| 2782 | hw = ieee80211_alloc_hw(sizeof(struct ath10k), &ath10k_ops); |
| 2783 | if (!hw) |
| 2784 | return NULL; |
| 2785 | |
| 2786 | ar = hw->priv; |
| 2787 | ar->hw = hw; |
| 2788 | |
| 2789 | return ar; |
| 2790 | } |
| 2791 | |
| 2792 | void ath10k_mac_destroy(struct ath10k *ar) |
| 2793 | { |
| 2794 | ieee80211_free_hw(ar->hw); |
| 2795 | } |
| 2796 | |
| 2797 | static const struct ieee80211_iface_limit ath10k_if_limits[] = { |
| 2798 | { |
| 2799 | .max = 8, |
| 2800 | .types = BIT(NL80211_IFTYPE_STATION) |
| 2801 | | BIT(NL80211_IFTYPE_P2P_CLIENT) |
| 2802 | | BIT(NL80211_IFTYPE_P2P_GO) |
| 2803 | | BIT(NL80211_IFTYPE_AP) |
| 2804 | } |
| 2805 | }; |
| 2806 | |
| 2807 | static const struct ieee80211_iface_combination ath10k_if_comb = { |
| 2808 | .limits = ath10k_if_limits, |
| 2809 | .n_limits = ARRAY_SIZE(ath10k_if_limits), |
| 2810 | .max_interfaces = 8, |
| 2811 | .num_different_channels = 1, |
| 2812 | .beacon_int_infra_match = true, |
| 2813 | }; |
| 2814 | |
| 2815 | static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) |
| 2816 | { |
| 2817 | struct ieee80211_sta_vht_cap vht_cap = {0}; |
| 2818 | u16 mcs_map; |
| 2819 | |
| 2820 | vht_cap.vht_supported = 1; |
| 2821 | vht_cap.cap = ar->vht_cap_info; |
| 2822 | |
| 2823 | /* FIXME: check dynamically how many streams board supports */ |
| 2824 | mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 | |
| 2825 | IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 | |
| 2826 | IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 | |
| 2827 | IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 | |
| 2828 | IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 | |
| 2829 | IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 | |
| 2830 | IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 | |
| 2831 | IEEE80211_VHT_MCS_NOT_SUPPORTED << 14; |
| 2832 | |
| 2833 | vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map); |
| 2834 | vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map); |
| 2835 | |
| 2836 | return vht_cap; |
| 2837 | } |
| 2838 | |
| 2839 | static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) |
| 2840 | { |
| 2841 | int i; |
| 2842 | struct ieee80211_sta_ht_cap ht_cap = {0}; |
| 2843 | |
| 2844 | if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED)) |
| 2845 | return ht_cap; |
| 2846 | |
| 2847 | ht_cap.ht_supported = 1; |
| 2848 | ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| 2849 | ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; |
| 2850 | ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| 2851 | ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; |
| 2852 | ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT; |
| 2853 | |
| 2854 | if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI) |
| 2855 | ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; |
| 2856 | |
| 2857 | if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI) |
| 2858 | ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; |
| 2859 | |
| 2860 | if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) { |
| 2861 | u32 smps; |
| 2862 | |
| 2863 | smps = WLAN_HT_CAP_SM_PS_DYNAMIC; |
| 2864 | smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; |
| 2865 | |
| 2866 | ht_cap.cap |= smps; |
| 2867 | } |
| 2868 | |
| 2869 | if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC) |
| 2870 | ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC; |
| 2871 | |
| 2872 | if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) { |
| 2873 | u32 stbc; |
| 2874 | |
| 2875 | stbc = ar->ht_cap_info; |
| 2876 | stbc &= WMI_HT_CAP_RX_STBC; |
| 2877 | stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT; |
| 2878 | stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| 2879 | stbc &= IEEE80211_HT_CAP_RX_STBC; |
| 2880 | |
| 2881 | ht_cap.cap |= stbc; |
| 2882 | } |
| 2883 | |
| 2884 | if (ar->ht_cap_info & WMI_HT_CAP_LDPC) |
| 2885 | ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING; |
| 2886 | |
| 2887 | if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT) |
| 2888 | ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT; |
| 2889 | |
| 2890 | /* max AMSDU is implicitly taken from vht_cap_info */ |
| 2891 | if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK) |
| 2892 | ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU; |
| 2893 | |
| 2894 | for (i = 0; i < WMI_MAX_SPATIAL_STREAM; i++) |
| 2895 | ht_cap.mcs.rx_mask[i] = 0xFF; |
| 2896 | |
| 2897 | ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; |
| 2898 | |
| 2899 | return ht_cap; |
| 2900 | } |
| 2901 | |
| 2902 | |
| 2903 | static void ath10k_get_arvif_iter(void *data, u8 *mac, |
| 2904 | struct ieee80211_vif *vif) |
| 2905 | { |
| 2906 | struct ath10k_vif_iter *arvif_iter = data; |
| 2907 | struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); |
| 2908 | |
| 2909 | if (arvif->vdev_id == arvif_iter->vdev_id) |
| 2910 | arvif_iter->arvif = arvif; |
| 2911 | } |
| 2912 | |
| 2913 | struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id) |
| 2914 | { |
| 2915 | struct ath10k_vif_iter arvif_iter; |
| 2916 | u32 flags; |
| 2917 | |
| 2918 | memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter)); |
| 2919 | arvif_iter.vdev_id = vdev_id; |
| 2920 | |
| 2921 | flags = IEEE80211_IFACE_ITER_RESUME_ALL; |
| 2922 | ieee80211_iterate_active_interfaces_atomic(ar->hw, |
| 2923 | flags, |
| 2924 | ath10k_get_arvif_iter, |
| 2925 | &arvif_iter); |
| 2926 | if (!arvif_iter.arvif) { |
| 2927 | ath10k_warn("No VIF found for VDEV: %d\n", vdev_id); |
| 2928 | return NULL; |
| 2929 | } |
| 2930 | |
| 2931 | return arvif_iter.arvif; |
| 2932 | } |
| 2933 | |
| 2934 | int ath10k_mac_register(struct ath10k *ar) |
| 2935 | { |
| 2936 | struct ieee80211_supported_band *band; |
| 2937 | struct ieee80211_sta_vht_cap vht_cap; |
| 2938 | struct ieee80211_sta_ht_cap ht_cap; |
| 2939 | void *channels; |
| 2940 | int ret; |
| 2941 | |
| 2942 | SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr); |
| 2943 | |
| 2944 | SET_IEEE80211_DEV(ar->hw, ar->dev); |
| 2945 | |
| 2946 | ht_cap = ath10k_get_ht_cap(ar); |
| 2947 | vht_cap = ath10k_create_vht_cap(ar); |
| 2948 | |
| 2949 | if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { |
| 2950 | channels = kmemdup(ath10k_2ghz_channels, |
| 2951 | sizeof(ath10k_2ghz_channels), |
| 2952 | GFP_KERNEL); |
| 2953 | if (!channels) |
| 2954 | return -ENOMEM; |
| 2955 | |
| 2956 | band = &ar->mac.sbands[IEEE80211_BAND_2GHZ]; |
| 2957 | band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels); |
| 2958 | band->channels = channels; |
| 2959 | band->n_bitrates = ath10k_g_rates_size; |
| 2960 | band->bitrates = ath10k_g_rates; |
| 2961 | band->ht_cap = ht_cap; |
| 2962 | |
| 2963 | /* vht is not supported in 2.4 GHz */ |
| 2964 | |
| 2965 | ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band; |
| 2966 | } |
| 2967 | |
| 2968 | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { |
| 2969 | channels = kmemdup(ath10k_5ghz_channels, |
| 2970 | sizeof(ath10k_5ghz_channels), |
| 2971 | GFP_KERNEL); |
| 2972 | if (!channels) { |
| 2973 | if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { |
| 2974 | band = &ar->mac.sbands[IEEE80211_BAND_2GHZ]; |
| 2975 | kfree(band->channels); |
| 2976 | } |
| 2977 | return -ENOMEM; |
| 2978 | } |
| 2979 | |
| 2980 | band = &ar->mac.sbands[IEEE80211_BAND_5GHZ]; |
| 2981 | band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels); |
| 2982 | band->channels = channels; |
| 2983 | band->n_bitrates = ath10k_a_rates_size; |
| 2984 | band->bitrates = ath10k_a_rates; |
| 2985 | band->ht_cap = ht_cap; |
| 2986 | band->vht_cap = vht_cap; |
| 2987 | ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band; |
| 2988 | } |
| 2989 | |
| 2990 | ar->hw->wiphy->interface_modes = |
| 2991 | BIT(NL80211_IFTYPE_STATION) | |
| 2992 | BIT(NL80211_IFTYPE_ADHOC) | |
| 2993 | BIT(NL80211_IFTYPE_AP) | |
| 2994 | BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| 2995 | BIT(NL80211_IFTYPE_P2P_GO); |
| 2996 | |
| 2997 | ar->hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| 2998 | IEEE80211_HW_SUPPORTS_PS | |
| 2999 | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | |
| 3000 | IEEE80211_HW_SUPPORTS_UAPSD | |
| 3001 | IEEE80211_HW_MFP_CAPABLE | |
| 3002 | IEEE80211_HW_REPORTS_TX_ACK_STATUS | |
| 3003 | IEEE80211_HW_HAS_RATE_CONTROL | |
| 3004 | IEEE80211_HW_SUPPORTS_STATIC_SMPS | |
| 3005 | IEEE80211_HW_WANT_MONITOR_VIF | |
| 3006 | IEEE80211_HW_AP_LINK_PS; |
| 3007 | |
| 3008 | if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) |
| 3009 | ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS; |
| 3010 | |
| 3011 | if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) { |
| 3012 | ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; |
| 3013 | ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW; |
| 3014 | } |
| 3015 | |
| 3016 | ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; |
| 3017 | ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN; |
| 3018 | |
| 3019 | ar->hw->vif_data_size = sizeof(struct ath10k_vif); |
| 3020 | |
| 3021 | ar->hw->channel_change_time = 5000; |
| 3022 | ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL; |
| 3023 | |
| 3024 | ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; |
| 3025 | ar->hw->wiphy->max_remain_on_channel_duration = 5000; |
| 3026 | |
| 3027 | ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; |
| 3028 | /* |
| 3029 | * on LL hardware queues are managed entirely by the FW |
| 3030 | * so we only advertise to mac we can do the queues thing |
| 3031 | */ |
| 3032 | ar->hw->queues = 4; |
| 3033 | |
| 3034 | ar->hw->wiphy->iface_combinations = &ath10k_if_comb; |
| 3035 | ar->hw->wiphy->n_iface_combinations = 1; |
| 3036 | |
| 3037 | ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, |
| 3038 | ath10k_reg_notifier); |
| 3039 | if (ret) { |
| 3040 | ath10k_err("Regulatory initialization failed\n"); |
| 3041 | return ret; |
| 3042 | } |
| 3043 | |
| 3044 | ret = ieee80211_register_hw(ar->hw); |
| 3045 | if (ret) { |
| 3046 | ath10k_err("ieee80211 registration failed: %d\n", ret); |
| 3047 | return ret; |
| 3048 | } |
| 3049 | |
| 3050 | if (!ath_is_world_regd(&ar->ath_common.regulatory)) { |
| 3051 | ret = regulatory_hint(ar->hw->wiphy, |
| 3052 | ar->ath_common.regulatory.alpha2); |
| 3053 | if (ret) |
| 3054 | goto exit; |
| 3055 | } |
| 3056 | |
| 3057 | return 0; |
| 3058 | exit: |
| 3059 | ieee80211_unregister_hw(ar->hw); |
| 3060 | return ret; |
| 3061 | } |
| 3062 | |
| 3063 | void ath10k_mac_unregister(struct ath10k *ar) |
| 3064 | { |
| 3065 | ieee80211_unregister_hw(ar->hw); |
| 3066 | |
| 3067 | kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels); |
| 3068 | kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels); |
| 3069 | |
| 3070 | SET_IEEE80211_DEV(ar->hw, NULL); |
| 3071 | } |