Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Fuel gauge driver for CellWise 2013 / 2015 |
| 4 | * |
| 5 | * Copyright (C) 2012, RockChip |
| 6 | * Copyright (C) 2020, Tobias Schramm |
| 7 | * |
| 8 | * Authors: xuhuicong <xhc@rock-chips.com> |
| 9 | * Authors: Tobias Schramm <t.schramm@manjaro.org> |
| 10 | */ |
| 11 | |
| 12 | #include <linux/bits.h> |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/gfp.h> |
| 16 | #include <linux/gpio/consumer.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/power_supply.h> |
| 20 | #include <linux/property.h> |
| 21 | #include <linux/regmap.h> |
| 22 | #include <linux/time.h> |
| 23 | #include <linux/workqueue.h> |
| 24 | |
| 25 | #define CW2015_SIZE_BATINFO 64 |
| 26 | |
| 27 | #define CW2015_RESET_TRIES 5 |
| 28 | |
| 29 | #define CW2015_REG_VERSION 0x00 |
| 30 | #define CW2015_REG_VCELL 0x02 |
| 31 | #define CW2015_REG_SOC 0x04 |
| 32 | #define CW2015_REG_RRT_ALERT 0x06 |
| 33 | #define CW2015_REG_CONFIG 0x08 |
| 34 | #define CW2015_REG_MODE 0x0A |
| 35 | #define CW2015_REG_BATINFO 0x10 |
| 36 | |
| 37 | #define CW2015_MODE_SLEEP_MASK GENMASK(7, 6) |
| 38 | #define CW2015_MODE_SLEEP (0x03 << 6) |
| 39 | #define CW2015_MODE_NORMAL (0x00 << 6) |
| 40 | #define CW2015_MODE_QUICK_START (0x03 << 4) |
| 41 | #define CW2015_MODE_RESTART (0x0f << 0) |
| 42 | |
| 43 | #define CW2015_CONFIG_UPDATE_FLG (0x01 << 1) |
| 44 | #define CW2015_ATHD(x) ((x) << 3) |
| 45 | #define CW2015_MASK_ATHD GENMASK(7, 3) |
| 46 | #define CW2015_MASK_SOC GENMASK(12, 0) |
| 47 | |
| 48 | /* reset gauge of no valid state of charge could be polled for 40s */ |
| 49 | #define CW2015_BAT_SOC_ERROR_MS (40 * MSEC_PER_SEC) |
| 50 | /* reset gauge if state of charge stuck for half an hour during charging */ |
| 51 | #define CW2015_BAT_CHARGING_STUCK_MS (1800 * MSEC_PER_SEC) |
| 52 | |
| 53 | /* poll interval from CellWise GPL Android driver example */ |
| 54 | #define CW2015_DEFAULT_POLL_INTERVAL_MS 8000 |
| 55 | |
| 56 | #define CW2015_AVERAGING_SAMPLES 3 |
| 57 | |
| 58 | struct cw_battery { |
| 59 | struct device *dev; |
| 60 | struct workqueue_struct *battery_workqueue; |
| 61 | struct delayed_work battery_delay_work; |
| 62 | struct regmap *regmap; |
| 63 | struct power_supply *rk_bat; |
| 64 | struct power_supply_battery_info battery; |
| 65 | u8 *bat_profile; |
| 66 | |
| 67 | bool charger_attached; |
| 68 | bool battery_changed; |
| 69 | |
| 70 | int soc; |
| 71 | int voltage_mv; |
| 72 | int status; |
| 73 | int time_to_empty; |
| 74 | int charge_count; |
| 75 | |
| 76 | u32 poll_interval_ms; |
| 77 | u8 alert_level; |
| 78 | |
| 79 | unsigned int read_errors; |
| 80 | unsigned int charge_stuck_cnt; |
| 81 | }; |
| 82 | |
| 83 | static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val) |
| 84 | { |
| 85 | __be16 value; |
| 86 | int ret; |
| 87 | |
| 88 | ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value)); |
| 89 | if (ret) |
| 90 | return ret; |
| 91 | |
| 92 | *val = be16_to_cpu(value); |
| 93 | return 0; |
| 94 | } |
| 95 | |
ChenTao | 1a45732 | 2020-05-06 19:45:18 +0800 | [diff] [blame] | 96 | static int cw_update_profile(struct cw_battery *cw_bat) |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 97 | { |
| 98 | int ret; |
| 99 | unsigned int reg_val; |
| 100 | u8 reset_val; |
| 101 | |
| 102 | /* make sure gauge is not in sleep mode */ |
| 103 | ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val); |
| 104 | if (ret) |
| 105 | return ret; |
| 106 | |
| 107 | reset_val = reg_val; |
| 108 | if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { |
| 109 | dev_err(cw_bat->dev, |
| 110 | "Gauge is in sleep mode, can't update battery info\n"); |
| 111 | return -EINVAL; |
| 112 | } |
| 113 | |
| 114 | /* write new battery info */ |
| 115 | ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO, |
| 116 | cw_bat->bat_profile, |
| 117 | CW2015_SIZE_BATINFO); |
| 118 | if (ret) |
| 119 | return ret; |
| 120 | |
| 121 | /* set config update flag */ |
| 122 | reg_val |= CW2015_CONFIG_UPDATE_FLG; |
| 123 | reg_val &= ~CW2015_MASK_ATHD; |
| 124 | reg_val |= CW2015_ATHD(cw_bat->alert_level); |
| 125 | ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val); |
| 126 | if (ret) |
| 127 | return ret; |
| 128 | |
| 129 | /* reset gauge to apply new battery profile */ |
| 130 | reset_val &= ~CW2015_MODE_RESTART; |
| 131 | reg_val = reset_val | CW2015_MODE_RESTART; |
| 132 | ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val); |
| 133 | if (ret) |
| 134 | return ret; |
| 135 | |
| 136 | /* wait for gauge to reset */ |
| 137 | msleep(20); |
| 138 | |
| 139 | /* clear reset flag */ |
| 140 | ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); |
| 141 | if (ret) |
| 142 | return ret; |
| 143 | |
| 144 | /* wait for gauge to become ready */ |
| 145 | ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC, |
| 146 | reg_val, reg_val <= 100, |
| 147 | 10 * USEC_PER_MSEC, 10 * USEC_PER_SEC); |
| 148 | if (ret) |
| 149 | dev_err(cw_bat->dev, |
| 150 | "Gauge did not become ready after profile upload\n"); |
| 151 | else |
| 152 | dev_dbg(cw_bat->dev, "Battery profile updated\n"); |
| 153 | |
| 154 | return ret; |
| 155 | } |
| 156 | |
| 157 | static int cw_init(struct cw_battery *cw_bat) |
| 158 | { |
| 159 | int ret; |
| 160 | unsigned int reg_val = CW2015_MODE_SLEEP; |
| 161 | |
| 162 | if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { |
| 163 | reg_val = CW2015_MODE_NORMAL; |
| 164 | ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val); |
| 165 | if (ret) |
| 166 | return ret; |
| 167 | } |
| 168 | |
| 169 | ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val); |
| 170 | if (ret) |
| 171 | return ret; |
| 172 | |
| 173 | if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) { |
| 174 | dev_dbg(cw_bat->dev, "Setting new alert level\n"); |
| 175 | reg_val &= ~CW2015_MASK_ATHD; |
| 176 | reg_val |= ~CW2015_ATHD(cw_bat->alert_level); |
| 177 | ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val); |
| 178 | if (ret) |
| 179 | return ret; |
| 180 | } |
| 181 | |
| 182 | ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val); |
| 183 | if (ret) |
| 184 | return ret; |
| 185 | |
| 186 | if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { |
| 187 | dev_dbg(cw_bat->dev, |
| 188 | "Battery profile not present, uploading battery profile\n"); |
| 189 | if (cw_bat->bat_profile) { |
| 190 | ret = cw_update_profile(cw_bat); |
| 191 | if (ret) { |
| 192 | dev_err(cw_bat->dev, |
| 193 | "Failed to upload battery profile\n"); |
| 194 | return ret; |
| 195 | } |
| 196 | } else { |
| 197 | dev_warn(cw_bat->dev, |
| 198 | "No profile specified, continuing without profile\n"); |
| 199 | } |
| 200 | } else if (cw_bat->bat_profile) { |
| 201 | u8 bat_info[CW2015_SIZE_BATINFO]; |
| 202 | |
| 203 | ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO, |
| 204 | bat_info, CW2015_SIZE_BATINFO); |
| 205 | if (ret) { |
| 206 | dev_err(cw_bat->dev, |
| 207 | "Failed to read stored battery profile\n"); |
| 208 | return ret; |
| 209 | } |
| 210 | |
| 211 | if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) { |
| 212 | dev_warn(cw_bat->dev, "Replacing stored battery profile\n"); |
| 213 | ret = cw_update_profile(cw_bat); |
| 214 | if (ret) |
| 215 | return ret; |
| 216 | } |
| 217 | } else { |
| 218 | dev_warn(cw_bat->dev, |
| 219 | "Can't check current battery profile, no profile provided\n"); |
| 220 | } |
| 221 | |
| 222 | dev_dbg(cw_bat->dev, "Battery profile configured\n"); |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static int cw_power_on_reset(struct cw_battery *cw_bat) |
| 227 | { |
| 228 | int ret; |
| 229 | unsigned char reset_val; |
| 230 | |
| 231 | reset_val = CW2015_MODE_SLEEP; |
| 232 | ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); |
| 233 | if (ret) |
| 234 | return ret; |
| 235 | |
| 236 | /* wait for gauge to enter sleep */ |
| 237 | msleep(20); |
| 238 | |
| 239 | reset_val = CW2015_MODE_NORMAL; |
| 240 | ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); |
| 241 | if (ret) |
| 242 | return ret; |
| 243 | |
| 244 | ret = cw_init(cw_bat); |
| 245 | if (ret) |
| 246 | return ret; |
| 247 | return 0; |
| 248 | } |
| 249 | |
| 250 | #define HYSTERESIS(current, previous, up, down) \ |
| 251 | (((current) < (previous) + (up)) && ((current) > (previous) - (down))) |
| 252 | |
| 253 | static int cw_get_soc(struct cw_battery *cw_bat) |
| 254 | { |
| 255 | unsigned int soc; |
| 256 | int ret; |
| 257 | |
| 258 | ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc); |
| 259 | if (ret) |
| 260 | return ret; |
| 261 | |
| 262 | if (soc > 100) { |
| 263 | int max_error_cycles = |
| 264 | CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms; |
| 265 | |
| 266 | dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc); |
| 267 | cw_bat->read_errors++; |
| 268 | if (cw_bat->read_errors > max_error_cycles) { |
| 269 | dev_warn(cw_bat->dev, |
| 270 | "Too many invalid SoC reports, resetting gauge\n"); |
| 271 | cw_power_on_reset(cw_bat); |
| 272 | cw_bat->read_errors = 0; |
| 273 | } |
| 274 | return cw_bat->soc; |
| 275 | } |
| 276 | cw_bat->read_errors = 0; |
| 277 | |
| 278 | /* Reset gauge if stuck while charging */ |
| 279 | if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) { |
| 280 | int max_stuck_cycles = |
| 281 | CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms; |
| 282 | |
| 283 | cw_bat->charge_stuck_cnt++; |
| 284 | if (cw_bat->charge_stuck_cnt > max_stuck_cycles) { |
| 285 | dev_warn(cw_bat->dev, |
| 286 | "SoC stuck @%u%%, resetting gauge\n", soc); |
| 287 | cw_power_on_reset(cw_bat); |
| 288 | cw_bat->charge_stuck_cnt = 0; |
| 289 | } |
| 290 | } else { |
| 291 | cw_bat->charge_stuck_cnt = 0; |
| 292 | } |
| 293 | |
| 294 | /* Ignore voltage dips during charge */ |
| 295 | if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3)) |
| 296 | soc = cw_bat->soc; |
| 297 | |
| 298 | /* Ignore voltage spikes during discharge */ |
| 299 | if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0)) |
| 300 | soc = cw_bat->soc; |
| 301 | |
| 302 | return soc; |
| 303 | } |
| 304 | |
| 305 | static int cw_get_voltage(struct cw_battery *cw_bat) |
| 306 | { |
| 307 | int ret, i, voltage_mv; |
| 308 | u16 reg_val; |
| 309 | u32 avg = 0; |
| 310 | |
| 311 | for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) { |
| 312 | ret = cw_read_word(cw_bat, CW2015_REG_VCELL, ®_val); |
| 313 | if (ret) |
| 314 | return ret; |
| 315 | |
| 316 | avg += reg_val; |
| 317 | } |
| 318 | avg /= CW2015_AVERAGING_SAMPLES; |
| 319 | |
| 320 | /* |
| 321 | * 305 uV per ADC step |
| 322 | * Use 312 / 1024 as efficient approximation of 305 / 1000 |
| 323 | * Negligible error of 0.1% |
| 324 | */ |
| 325 | voltage_mv = avg * 312 / 1024; |
| 326 | |
| 327 | dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n", |
| 328 | voltage_mv, reg_val); |
| 329 | return voltage_mv; |
| 330 | } |
| 331 | |
| 332 | static int cw_get_time_to_empty(struct cw_battery *cw_bat) |
| 333 | { |
| 334 | int ret; |
| 335 | u16 value16; |
| 336 | |
| 337 | ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16); |
| 338 | if (ret) |
| 339 | return ret; |
| 340 | |
| 341 | return value16 & CW2015_MASK_SOC; |
| 342 | } |
| 343 | |
| 344 | static void cw_update_charge_status(struct cw_battery *cw_bat) |
| 345 | { |
| 346 | int ret; |
| 347 | |
| 348 | ret = power_supply_am_i_supplied(cw_bat->rk_bat); |
| 349 | if (ret < 0) { |
| 350 | dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret); |
| 351 | } else { |
| 352 | bool charger_attached; |
| 353 | |
| 354 | charger_attached = !!ret; |
| 355 | if (cw_bat->charger_attached != charger_attached) { |
| 356 | cw_bat->battery_changed = true; |
| 357 | if (charger_attached) |
| 358 | cw_bat->charge_count++; |
| 359 | } |
| 360 | cw_bat->charger_attached = charger_attached; |
| 361 | } |
| 362 | } |
| 363 | |
| 364 | static void cw_update_soc(struct cw_battery *cw_bat) |
| 365 | { |
| 366 | int soc; |
| 367 | |
| 368 | soc = cw_get_soc(cw_bat); |
| 369 | if (soc < 0) |
| 370 | dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc); |
| 371 | else if (cw_bat->soc != soc) { |
| 372 | cw_bat->soc = soc; |
| 373 | cw_bat->battery_changed = true; |
| 374 | } |
| 375 | } |
| 376 | |
| 377 | static void cw_update_voltage(struct cw_battery *cw_bat) |
| 378 | { |
| 379 | int voltage_mv; |
| 380 | |
| 381 | voltage_mv = cw_get_voltage(cw_bat); |
| 382 | if (voltage_mv < 0) |
| 383 | dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n", |
| 384 | voltage_mv); |
| 385 | else |
| 386 | cw_bat->voltage_mv = voltage_mv; |
| 387 | } |
| 388 | |
| 389 | static void cw_update_status(struct cw_battery *cw_bat) |
| 390 | { |
| 391 | int status = POWER_SUPPLY_STATUS_DISCHARGING; |
| 392 | |
| 393 | if (cw_bat->charger_attached) { |
| 394 | if (cw_bat->soc >= 100) |
| 395 | status = POWER_SUPPLY_STATUS_FULL; |
| 396 | else |
| 397 | status = POWER_SUPPLY_STATUS_CHARGING; |
| 398 | } |
| 399 | |
| 400 | if (cw_bat->status != status) |
| 401 | cw_bat->battery_changed = true; |
| 402 | cw_bat->status = status; |
| 403 | } |
| 404 | |
| 405 | static void cw_update_time_to_empty(struct cw_battery *cw_bat) |
| 406 | { |
| 407 | int time_to_empty; |
| 408 | |
| 409 | time_to_empty = cw_get_time_to_empty(cw_bat); |
| 410 | if (time_to_empty < 0) |
| 411 | dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n", |
| 412 | time_to_empty); |
| 413 | else if (cw_bat->time_to_empty != time_to_empty) { |
| 414 | cw_bat->time_to_empty = time_to_empty; |
| 415 | cw_bat->battery_changed = true; |
| 416 | } |
| 417 | } |
| 418 | |
| 419 | static void cw_bat_work(struct work_struct *work) |
| 420 | { |
| 421 | struct delayed_work *delay_work; |
| 422 | struct cw_battery *cw_bat; |
| 423 | int ret; |
| 424 | unsigned int reg_val; |
| 425 | |
| 426 | delay_work = to_delayed_work(work); |
| 427 | cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work); |
| 428 | ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val); |
| 429 | if (ret) { |
| 430 | dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret); |
| 431 | } else { |
| 432 | if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { |
| 433 | int i; |
| 434 | |
| 435 | for (i = 0; i < CW2015_RESET_TRIES; i++) { |
| 436 | if (!cw_power_on_reset(cw_bat)) |
| 437 | break; |
| 438 | } |
| 439 | } |
| 440 | cw_update_soc(cw_bat); |
| 441 | cw_update_voltage(cw_bat); |
| 442 | cw_update_charge_status(cw_bat); |
| 443 | cw_update_status(cw_bat); |
| 444 | cw_update_time_to_empty(cw_bat); |
| 445 | } |
| 446 | dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached); |
| 447 | dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status); |
| 448 | dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc); |
| 449 | dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv); |
| 450 | |
| 451 | if (cw_bat->battery_changed) |
| 452 | power_supply_changed(cw_bat->rk_bat); |
| 453 | cw_bat->battery_changed = false; |
| 454 | |
| 455 | queue_delayed_work(cw_bat->battery_workqueue, |
| 456 | &cw_bat->battery_delay_work, |
| 457 | msecs_to_jiffies(cw_bat->poll_interval_ms)); |
| 458 | } |
| 459 | |
| 460 | static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat) |
| 461 | { |
| 462 | return cw_bat->time_to_empty > 0 && |
| 463 | cw_bat->time_to_empty < CW2015_MASK_SOC && |
| 464 | cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING; |
| 465 | } |
| 466 | |
| 467 | static int cw_battery_get_property(struct power_supply *psy, |
| 468 | enum power_supply_property psp, |
| 469 | union power_supply_propval *val) |
| 470 | { |
| 471 | struct cw_battery *cw_bat; |
| 472 | |
| 473 | cw_bat = power_supply_get_drvdata(psy); |
| 474 | switch (psp) { |
| 475 | case POWER_SUPPLY_PROP_CAPACITY: |
| 476 | val->intval = cw_bat->soc; |
| 477 | break; |
| 478 | |
| 479 | case POWER_SUPPLY_PROP_STATUS: |
| 480 | val->intval = cw_bat->status; |
| 481 | break; |
| 482 | |
| 483 | case POWER_SUPPLY_PROP_PRESENT: |
| 484 | val->intval = !!cw_bat->voltage_mv; |
| 485 | break; |
| 486 | |
| 487 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 488 | val->intval = cw_bat->voltage_mv * 1000; |
| 489 | break; |
| 490 | |
| 491 | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: |
| 492 | if (cw_battery_valid_time_to_empty(cw_bat)) |
| 493 | val->intval = cw_bat->time_to_empty; |
| 494 | else |
| 495 | val->intval = 0; |
| 496 | break; |
| 497 | |
| 498 | case POWER_SUPPLY_PROP_TECHNOLOGY: |
| 499 | val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| 500 | break; |
| 501 | |
| 502 | case POWER_SUPPLY_PROP_CHARGE_COUNTER: |
| 503 | val->intval = cw_bat->charge_count; |
| 504 | break; |
| 505 | |
| 506 | case POWER_SUPPLY_PROP_CHARGE_FULL: |
| 507 | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| 508 | if (cw_bat->battery.charge_full_design_uah > 0) |
| 509 | val->intval = cw_bat->battery.charge_full_design_uah; |
| 510 | else |
| 511 | val->intval = 0; |
| 512 | break; |
| 513 | |
Martin Ashby | bf38410 | 2021-02-18 07:42:50 -0500 | [diff] [blame] | 514 | case POWER_SUPPLY_PROP_CHARGE_NOW: |
| 515 | val->intval = cw_bat->battery.charge_full_design_uah; |
| 516 | val->intval = val->intval * cw_bat->soc / 100; |
| 517 | break; |
| 518 | |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 519 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 520 | if (cw_battery_valid_time_to_empty(cw_bat) && |
| 521 | cw_bat->battery.charge_full_design_uah > 0) { |
| 522 | /* calculate remaining capacity */ |
| 523 | val->intval = cw_bat->battery.charge_full_design_uah; |
| 524 | val->intval = val->intval * cw_bat->soc / 100; |
| 525 | |
| 526 | /* estimate current based on time to empty */ |
| 527 | val->intval = 60 * val->intval / cw_bat->time_to_empty; |
| 528 | } else { |
| 529 | val->intval = 0; |
| 530 | } |
| 531 | |
| 532 | break; |
| 533 | |
| 534 | default: |
| 535 | break; |
| 536 | } |
| 537 | return 0; |
| 538 | } |
| 539 | |
| 540 | static enum power_supply_property cw_battery_properties[] = { |
| 541 | POWER_SUPPLY_PROP_CAPACITY, |
| 542 | POWER_SUPPLY_PROP_STATUS, |
| 543 | POWER_SUPPLY_PROP_PRESENT, |
| 544 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 545 | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, |
| 546 | POWER_SUPPLY_PROP_TECHNOLOGY, |
| 547 | POWER_SUPPLY_PROP_CHARGE_COUNTER, |
| 548 | POWER_SUPPLY_PROP_CHARGE_FULL, |
| 549 | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
Martin Ashby | bf38410 | 2021-02-18 07:42:50 -0500 | [diff] [blame] | 550 | POWER_SUPPLY_PROP_CHARGE_NOW, |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 551 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 552 | }; |
| 553 | |
| 554 | static const struct power_supply_desc cw2015_bat_desc = { |
| 555 | .name = "cw2015-battery", |
| 556 | .type = POWER_SUPPLY_TYPE_BATTERY, |
| 557 | .properties = cw_battery_properties, |
| 558 | .num_properties = ARRAY_SIZE(cw_battery_properties), |
| 559 | .get_property = cw_battery_get_property, |
| 560 | }; |
| 561 | |
| 562 | static int cw2015_parse_properties(struct cw_battery *cw_bat) |
| 563 | { |
| 564 | struct device *dev = cw_bat->dev; |
| 565 | int length; |
| 566 | int ret; |
| 567 | |
| 568 | length = device_property_count_u8(dev, "cellwise,battery-profile"); |
| 569 | if (length < 0) { |
| 570 | dev_warn(cw_bat->dev, |
| 571 | "No battery-profile found, using current flash contents\n"); |
| 572 | } else if (length != CW2015_SIZE_BATINFO) { |
| 573 | dev_err(cw_bat->dev, "battery-profile must be %d bytes\n", |
| 574 | CW2015_SIZE_BATINFO); |
| 575 | return -EINVAL; |
| 576 | } else { |
| 577 | cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL); |
| 578 | if (!cw_bat->bat_profile) |
| 579 | return -ENOMEM; |
| 580 | |
| 581 | ret = device_property_read_u8_array(dev, |
| 582 | "cellwise,battery-profile", |
| 583 | cw_bat->bat_profile, |
| 584 | length); |
| 585 | if (ret) |
| 586 | return ret; |
| 587 | } |
| 588 | |
| 589 | ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms", |
| 590 | &cw_bat->poll_interval_ms); |
| 591 | if (ret) { |
| 592 | dev_dbg(cw_bat->dev, "Using default poll interval\n"); |
| 593 | cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS; |
| 594 | } |
| 595 | |
| 596 | return 0; |
| 597 | } |
| 598 | |
| 599 | static const struct regmap_range regmap_ranges_rd_yes[] = { |
| 600 | regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION), |
| 601 | regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG), |
| 602 | regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE), |
| 603 | regmap_reg_range(CW2015_REG_BATINFO, |
| 604 | CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1), |
| 605 | }; |
| 606 | |
| 607 | static const struct regmap_access_table regmap_rd_table = { |
| 608 | .yes_ranges = regmap_ranges_rd_yes, |
| 609 | .n_yes_ranges = 4, |
| 610 | }; |
| 611 | |
| 612 | static const struct regmap_range regmap_ranges_wr_yes[] = { |
| 613 | regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG), |
| 614 | regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE), |
| 615 | regmap_reg_range(CW2015_REG_BATINFO, |
| 616 | CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1), |
| 617 | }; |
| 618 | |
| 619 | static const struct regmap_access_table regmap_wr_table = { |
| 620 | .yes_ranges = regmap_ranges_wr_yes, |
| 621 | .n_yes_ranges = 3, |
| 622 | }; |
| 623 | |
| 624 | static const struct regmap_range regmap_ranges_vol_yes[] = { |
| 625 | regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1), |
| 626 | }; |
| 627 | |
| 628 | static const struct regmap_access_table regmap_vol_table = { |
| 629 | .yes_ranges = regmap_ranges_vol_yes, |
| 630 | .n_yes_ranges = 1, |
| 631 | }; |
| 632 | |
| 633 | static const struct regmap_config cw2015_regmap_config = { |
| 634 | .reg_bits = 8, |
| 635 | .val_bits = 8, |
| 636 | .rd_table = ®map_rd_table, |
| 637 | .wr_table = ®map_wr_table, |
| 638 | .volatile_table = ®map_vol_table, |
| 639 | .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1, |
| 640 | }; |
| 641 | |
| 642 | static int cw_bat_probe(struct i2c_client *client) |
| 643 | { |
| 644 | int ret; |
| 645 | struct cw_battery *cw_bat; |
| 646 | struct power_supply_config psy_cfg = { 0 }; |
| 647 | |
| 648 | cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL); |
| 649 | if (!cw_bat) |
| 650 | return -ENOMEM; |
| 651 | |
| 652 | i2c_set_clientdata(client, cw_bat); |
| 653 | cw_bat->dev = &client->dev; |
| 654 | cw_bat->soc = 1; |
| 655 | |
| 656 | ret = cw2015_parse_properties(cw_bat); |
| 657 | if (ret) { |
| 658 | dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n"); |
| 659 | return ret; |
| 660 | } |
| 661 | |
| 662 | cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config); |
| 663 | if (IS_ERR(cw_bat->regmap)) { |
| 664 | dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n", |
| 665 | PTR_ERR(cw_bat->regmap)); |
| 666 | return PTR_ERR(cw_bat->regmap); |
| 667 | } |
| 668 | |
| 669 | ret = cw_init(cw_bat); |
| 670 | if (ret) { |
| 671 | dev_err(cw_bat->dev, "Init failed: %d\n", ret); |
| 672 | return ret; |
| 673 | } |
| 674 | |
| 675 | psy_cfg.drv_data = cw_bat; |
| 676 | psy_cfg.fwnode = dev_fwnode(cw_bat->dev); |
| 677 | |
| 678 | cw_bat->rk_bat = devm_power_supply_register(&client->dev, |
| 679 | &cw2015_bat_desc, |
| 680 | &psy_cfg); |
| 681 | if (IS_ERR(cw_bat->rk_bat)) { |
Peter Robinson | ad1abe4 | 2021-07-01 23:05:16 +0100 | [diff] [blame] | 682 | /* try again if this happens */ |
| 683 | dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat), |
| 684 | "Failed to register power supply\n"); |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 685 | return PTR_ERR(cw_bat->rk_bat); |
| 686 | } |
| 687 | |
| 688 | ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery); |
| 689 | if (ret) { |
| 690 | dev_warn(cw_bat->dev, |
| 691 | "No monitored battery, some properties will be missing\n"); |
| 692 | } |
| 693 | |
| 694 | cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery"); |
| 695 | INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work); |
| 696 | queue_delayed_work(cw_bat->battery_workqueue, |
| 697 | &cw_bat->battery_delay_work, msecs_to_jiffies(10)); |
| 698 | return 0; |
| 699 | } |
| 700 | |
| 701 | static int __maybe_unused cw_bat_suspend(struct device *dev) |
| 702 | { |
| 703 | struct i2c_client *client = to_i2c_client(dev); |
| 704 | struct cw_battery *cw_bat = i2c_get_clientdata(client); |
| 705 | |
| 706 | cancel_delayed_work_sync(&cw_bat->battery_delay_work); |
| 707 | return 0; |
| 708 | } |
| 709 | |
| 710 | static int __maybe_unused cw_bat_resume(struct device *dev) |
| 711 | { |
| 712 | struct i2c_client *client = to_i2c_client(dev); |
| 713 | struct cw_battery *cw_bat = i2c_get_clientdata(client); |
| 714 | |
| 715 | queue_delayed_work(cw_bat->battery_workqueue, |
| 716 | &cw_bat->battery_delay_work, 0); |
| 717 | return 0; |
| 718 | } |
| 719 | |
ChenTao | 1a45732 | 2020-05-06 19:45:18 +0800 | [diff] [blame] | 720 | static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume); |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 721 | |
| 722 | static int cw_bat_remove(struct i2c_client *client) |
| 723 | { |
| 724 | struct cw_battery *cw_bat = i2c_get_clientdata(client); |
| 725 | |
| 726 | cancel_delayed_work_sync(&cw_bat->battery_delay_work); |
| 727 | power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery); |
| 728 | return 0; |
| 729 | } |
| 730 | |
| 731 | static const struct i2c_device_id cw_bat_id_table[] = { |
| 732 | { "cw2015", 0 }, |
| 733 | { } |
| 734 | }; |
| 735 | |
| 736 | static const struct of_device_id cw2015_of_match[] = { |
| 737 | { .compatible = "cellwise,cw2015" }, |
| 738 | { } |
| 739 | }; |
| 740 | MODULE_DEVICE_TABLE(of, cw2015_of_match); |
| 741 | |
| 742 | static struct i2c_driver cw_bat_driver = { |
| 743 | .driver = { |
| 744 | .name = "cw2015", |
Andy Shevchenko | 152204d | 2020-05-30 19:40:30 +0300 | [diff] [blame] | 745 | .of_match_table = cw2015_of_match, |
Tobias Schramm | b4c7715 | 2020-04-14 14:52:08 +0200 | [diff] [blame] | 746 | .pm = &cw_bat_pm_ops, |
| 747 | }, |
| 748 | .probe_new = cw_bat_probe, |
| 749 | .remove = cw_bat_remove, |
| 750 | .id_table = cw_bat_id_table, |
| 751 | }; |
| 752 | |
| 753 | module_i2c_driver(cw_bat_driver); |
| 754 | |
| 755 | MODULE_AUTHOR("xhc<xhc@rock-chips.com>"); |
| 756 | MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>"); |
| 757 | MODULE_DESCRIPTION("cw2015/cw2013 battery driver"); |
| 758 | MODULE_LICENSE("GPL"); |