Lars Povlsen | e492217 | 2020-06-18 15:59:51 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* Sparx5 SoC temperature sensor driver |
| 3 | * |
| 4 | * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com> |
| 5 | */ |
| 6 | |
| 7 | #include <linux/bitfield.h> |
| 8 | #include <linux/clk.h> |
| 9 | #include <linux/hwmon.h> |
| 10 | #include <linux/init.h> |
| 11 | #include <linux/io.h> |
| 12 | #include <linux/mod_devicetable.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/platform_device.h> |
| 15 | |
| 16 | #define TEMP_CTRL 0 |
| 17 | #define TEMP_CFG 4 |
| 18 | #define TEMP_CFG_CYCLES GENMASK(24, 15) |
| 19 | #define TEMP_CFG_ENA BIT(0) |
| 20 | #define TEMP_STAT 8 |
| 21 | #define TEMP_STAT_VALID BIT(12) |
| 22 | #define TEMP_STAT_TEMP GENMASK(11, 0) |
| 23 | |
| 24 | struct s5_hwmon { |
| 25 | void __iomem *base; |
| 26 | struct clk *clk; |
| 27 | }; |
| 28 | |
| 29 | static void s5_temp_clk_disable(void *data) |
| 30 | { |
| 31 | struct clk *clk = data; |
| 32 | |
| 33 | clk_disable_unprepare(clk); |
| 34 | } |
| 35 | |
| 36 | static void s5_temp_enable(struct s5_hwmon *hwmon) |
| 37 | { |
| 38 | u32 val = readl(hwmon->base + TEMP_CFG); |
| 39 | u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC; |
| 40 | |
| 41 | val &= ~TEMP_CFG_CYCLES; |
| 42 | val |= FIELD_PREP(TEMP_CFG_CYCLES, clk); |
| 43 | val |= TEMP_CFG_ENA; |
| 44 | |
| 45 | writel(val, hwmon->base + TEMP_CFG); |
| 46 | } |
| 47 | |
| 48 | static int s5_read(struct device *dev, enum hwmon_sensor_types type, |
| 49 | u32 attr, int channel, long *temp) |
| 50 | { |
| 51 | struct s5_hwmon *hwmon = dev_get_drvdata(dev); |
| 52 | int rc = 0, value; |
| 53 | u32 stat; |
| 54 | |
| 55 | switch (attr) { |
| 56 | case hwmon_temp_input: |
| 57 | stat = readl_relaxed(hwmon->base + TEMP_STAT); |
| 58 | if (!(stat & TEMP_STAT_VALID)) |
Lars Povlsen | fcb575b | 2020-09-03 15:47:04 +0200 | [diff] [blame] | 59 | return -EAGAIN; |
Lars Povlsen | e492217 | 2020-06-18 15:59:51 +0200 | [diff] [blame] | 60 | value = stat & TEMP_STAT_TEMP; |
| 61 | /* |
| 62 | * From register documentation: |
| 63 | * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4 |
| 64 | */ |
| 65 | value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094; |
| 66 | /* |
| 67 | * Scale down by 10 from above and multiply by 1000 to |
| 68 | * have millidegrees as specified by the hwmon sysfs |
| 69 | * interface. |
| 70 | */ |
| 71 | value *= 100; |
| 72 | *temp = value; |
| 73 | break; |
| 74 | default: |
| 75 | rc = -EOPNOTSUPP; |
| 76 | break; |
| 77 | } |
| 78 | |
| 79 | return rc; |
| 80 | } |
| 81 | |
| 82 | static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type, |
| 83 | u32 attr, int channel) |
| 84 | { |
| 85 | if (type != hwmon_temp) |
| 86 | return 0; |
| 87 | |
| 88 | switch (attr) { |
| 89 | case hwmon_temp_input: |
| 90 | return 0444; |
| 91 | default: |
| 92 | return 0; |
| 93 | } |
| 94 | } |
| 95 | |
| 96 | static const struct hwmon_channel_info *s5_info[] = { |
| 97 | HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), |
| 98 | HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), |
| 99 | NULL |
| 100 | }; |
| 101 | |
| 102 | static const struct hwmon_ops s5_hwmon_ops = { |
| 103 | .is_visible = s5_is_visible, |
| 104 | .read = s5_read, |
| 105 | }; |
| 106 | |
| 107 | static const struct hwmon_chip_info s5_chip_info = { |
| 108 | .ops = &s5_hwmon_ops, |
| 109 | .info = s5_info, |
| 110 | }; |
| 111 | |
| 112 | static int s5_temp_probe(struct platform_device *pdev) |
| 113 | { |
| 114 | struct device *hwmon_dev; |
| 115 | struct s5_hwmon *hwmon; |
| 116 | int ret; |
| 117 | |
| 118 | hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); |
| 119 | if (!hwmon) |
| 120 | return -ENOMEM; |
| 121 | |
| 122 | hwmon->base = devm_platform_ioremap_resource(pdev, 0); |
| 123 | if (IS_ERR(hwmon->base)) |
| 124 | return PTR_ERR(hwmon->base); |
| 125 | |
| 126 | hwmon->clk = devm_clk_get(&pdev->dev, NULL); |
| 127 | if (IS_ERR(hwmon->clk)) |
| 128 | return PTR_ERR(hwmon->clk); |
| 129 | |
| 130 | ret = clk_prepare_enable(hwmon->clk); |
| 131 | if (ret) |
| 132 | return ret; |
| 133 | |
| 134 | ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable, |
| 135 | hwmon->clk); |
| 136 | if (ret) |
| 137 | return ret; |
| 138 | |
| 139 | s5_temp_enable(hwmon); |
| 140 | |
| 141 | hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, |
| 142 | "s5_temp", |
| 143 | hwmon, |
| 144 | &s5_chip_info, |
| 145 | NULL); |
| 146 | |
| 147 | return PTR_ERR_OR_ZERO(hwmon_dev); |
| 148 | } |
| 149 | |
Wei Yongjun | 2fdf8f7 | 2020-07-21 21:49:19 +0800 | [diff] [blame] | 150 | static const struct of_device_id s5_temp_match[] = { |
Lars Povlsen | e492217 | 2020-06-18 15:59:51 +0200 | [diff] [blame] | 151 | { .compatible = "microchip,sparx5-temp" }, |
| 152 | {}, |
| 153 | }; |
| 154 | MODULE_DEVICE_TABLE(of, s5_temp_match); |
| 155 | |
| 156 | static struct platform_driver s5_temp_driver = { |
| 157 | .probe = s5_temp_probe, |
| 158 | .driver = { |
| 159 | .name = "sparx5-temp", |
| 160 | .of_match_table = s5_temp_match, |
| 161 | }, |
| 162 | }; |
| 163 | |
| 164 | module_platform_driver(s5_temp_driver); |
| 165 | |
| 166 | MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>"); |
| 167 | MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver"); |
| 168 | MODULE_LICENSE("GPL"); |