Wei Song | 792d376 | 2010-10-28 20:31:44 +0200 | [diff] [blame^] | 1 | /* |
| 2 | * w83795.c - Linux kernel driver for hardware monitoring |
| 3 | * Copyright (C) 2008 Nuvoton Technology Corp. |
| 4 | * Wei Song |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation - version 2. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 18 | * 02110-1301 USA. |
| 19 | * |
| 20 | * Supports following chips: |
| 21 | * |
| 22 | * Chip #vin #fanin #pwm #temp #dts wchipid vendid i2c ISA |
| 23 | * w83795g 21 14 8 6 8 0x79 0x5ca3 yes no |
| 24 | * w83795adg 18 14 2 6 8 0x79 0x5ca3 yes no |
| 25 | */ |
| 26 | |
| 27 | #include <linux/kernel.h> |
| 28 | #include <linux/module.h> |
| 29 | #include <linux/init.h> |
| 30 | #include <linux/slab.h> |
| 31 | #include <linux/i2c.h> |
| 32 | #include <linux/hwmon.h> |
| 33 | #include <linux/hwmon-sysfs.h> |
| 34 | #include <linux/err.h> |
| 35 | #include <linux/mutex.h> |
| 36 | #include <linux/delay.h> |
| 37 | |
| 38 | /* Addresses to scan */ |
| 39 | static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; |
| 40 | |
| 41 | enum chips { w83795 }; |
| 42 | |
| 43 | |
| 44 | static int reset; |
| 45 | module_param(reset, bool, 0); |
| 46 | MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); |
| 47 | |
| 48 | |
| 49 | #define W83795_REG_BANKSEL 0x00 |
| 50 | #define W83795_REG_VENDORID 0xfd |
| 51 | #define W83795_REG_CHIPID 0xfe |
| 52 | #define W83795_REG_DEVICEID 0xfb |
| 53 | |
| 54 | #define W83795_REG_I2C_ADDR 0xfc |
| 55 | #define W83795_REG_CONFIG 0x01 |
| 56 | #define W83795_REG_CONFIG_CONFIG48 0x04 |
| 57 | |
| 58 | /* Multi-Function Pin Ctrl Registers */ |
| 59 | #define W83795_REG_VOLT_CTRL1 0x02 |
| 60 | #define W83795_REG_VOLT_CTRL2 0x03 |
| 61 | #define W83795_REG_TEMP_CTRL1 0x04 |
| 62 | #define W83795_REG_TEMP_CTRL2 0x05 |
| 63 | #define W83795_REG_FANIN_CTRL1 0x06 |
| 64 | #define W83795_REG_FANIN_CTRL2 0x07 |
| 65 | #define W83795_REG_VMIGB_CTRL 0x08 |
| 66 | |
| 67 | #define TEMP_CTRL_DISABLE 0 |
| 68 | #define TEMP_CTRL_TD 1 |
| 69 | #define TEMP_CTRL_VSEN 2 |
| 70 | #define TEMP_CTRL_TR 3 |
| 71 | #define TEMP_CTRL_SHIFT 4 |
| 72 | #define TEMP_CTRL_HASIN_SHIFT 5 |
| 73 | /* temp mode may effect VSEN17-12 (in20-15) */ |
| 74 | static u16 W83795_REG_TEMP_CTRL[][6] = { |
| 75 | /* Disable, TD, VSEN, TR, register shift value, has_in shift num */ |
| 76 | {0x00, 0x01, 0x02, 0x03, 0, 17}, /* TR1 */ |
| 77 | {0x00, 0x04, 0x08, 0x0C, 2, 18}, /* TR2 */ |
| 78 | {0x00, 0x10, 0x20, 0x30, 4, 19}, /* TR3 */ |
| 79 | {0x00, 0x40, 0x80, 0xC0, 6, 20}, /* TR4 */ |
| 80 | {0x00, 0x00, 0x02, 0x03, 0, 15}, /* TR5 */ |
| 81 | {0x00, 0x00, 0x08, 0x0C, 2, 16}, /* TR6 */ |
| 82 | }; |
| 83 | |
| 84 | #define TEMP_READ 0 |
| 85 | #define TEMP_CRIT 1 |
| 86 | #define TEMP_CRIT_HYST 2 |
| 87 | #define TEMP_WARN 3 |
| 88 | #define TEMP_WARN_HYST 4 |
| 89 | /* only crit and crit_hyst affect real-time alarm status |
| 90 | * current crit crit_hyst warn warn_hyst */ |
| 91 | static u16 W83795_REG_TEMP[][5] = { |
| 92 | {0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */ |
| 93 | {0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */ |
| 94 | {0x23, 0x9e, 0x9f, 0xa0, 0xa1}, /* TD3/TR3 */ |
| 95 | {0x24, 0xa2, 0xa3, 0xa4, 0xa5}, /* TD4/TR4 */ |
| 96 | {0x1f, 0xa6, 0xa7, 0xa8, 0xa9}, /* TR5 */ |
| 97 | {0x20, 0xaa, 0xab, 0xac, 0xad}, /* TR6 */ |
| 98 | }; |
| 99 | |
| 100 | #define IN_READ 0 |
| 101 | #define IN_MAX 1 |
| 102 | #define IN_LOW 2 |
| 103 | static const u16 W83795_REG_IN[][3] = { |
| 104 | /* Current, HL, LL */ |
| 105 | {0x10, 0x70, 0x71}, /* VSEN1 */ |
| 106 | {0x11, 0x72, 0x73}, /* VSEN2 */ |
| 107 | {0x12, 0x74, 0x75}, /* VSEN3 */ |
| 108 | {0x13, 0x76, 0x77}, /* VSEN4 */ |
| 109 | {0x14, 0x78, 0x79}, /* VSEN5 */ |
| 110 | {0x15, 0x7a, 0x7b}, /* VSEN6 */ |
| 111 | {0x16, 0x7c, 0x7d}, /* VSEN7 */ |
| 112 | {0x17, 0x7e, 0x7f}, /* VSEN8 */ |
| 113 | {0x18, 0x80, 0x81}, /* VSEN9 */ |
| 114 | {0x19, 0x82, 0x83}, /* VSEN10 */ |
| 115 | {0x1A, 0x84, 0x85}, /* VSEN11 */ |
| 116 | {0x1B, 0x86, 0x87}, /* VTT */ |
| 117 | {0x1C, 0x88, 0x89}, /* 3VDD */ |
| 118 | {0x1D, 0x8a, 0x8b}, /* 3VSB */ |
| 119 | {0x1E, 0x8c, 0x8d}, /* VBAT */ |
| 120 | {0x1F, 0xa6, 0xa7}, /* VSEN12 */ |
| 121 | {0x20, 0xaa, 0xab}, /* VSEN13 */ |
| 122 | {0x21, 0x96, 0x97}, /* VSEN14 */ |
| 123 | {0x22, 0x9a, 0x9b}, /* VSEN15 */ |
| 124 | {0x23, 0x9e, 0x9f}, /* VSEN16 */ |
| 125 | {0x24, 0xa2, 0xa3}, /* VSEN17 */ |
| 126 | }; |
| 127 | #define W83795_REG_VRLSB 0x3C |
| 128 | #define VRLSB_SHIFT 6 |
| 129 | |
| 130 | static const u8 W83795_REG_IN_HL_LSB[] = { |
| 131 | 0x8e, /* VSEN1-4 */ |
| 132 | 0x90, /* VSEN5-8 */ |
| 133 | 0x92, /* VSEN9-11 */ |
| 134 | 0x94, /* VTT, 3VDD, 3VSB, 3VBAT */ |
| 135 | 0xa8, /* VSEN12 */ |
| 136 | 0xac, /* VSEN13 */ |
| 137 | 0x98, /* VSEN14 */ |
| 138 | 0x9c, /* VSEN15 */ |
| 139 | 0xa0, /* VSEN16 */ |
| 140 | 0xa4, /* VSEN17 */ |
| 141 | }; |
| 142 | |
| 143 | #define IN_LSB_REG(index, type) \ |
| 144 | (((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \ |
| 145 | : (W83795_REG_IN_HL_LSB[(index)] + 1)) |
| 146 | |
| 147 | #define IN_LSB_REG_NUM 10 |
| 148 | |
| 149 | #define IN_LSB_SHIFT 0 |
| 150 | #define IN_LSB_IDX 1 |
| 151 | static const u8 IN_LSB_SHIFT_IDX[][2] = { |
| 152 | /* High/Low LSB shift, LSB No. */ |
| 153 | {0x00, 0x00}, /* VSEN1 */ |
| 154 | {0x02, 0x00}, /* VSEN2 */ |
| 155 | {0x04, 0x00}, /* VSEN3 */ |
| 156 | {0x06, 0x00}, /* VSEN4 */ |
| 157 | {0x00, 0x01}, /* VSEN5 */ |
| 158 | {0x02, 0x01}, /* VSEN6 */ |
| 159 | {0x04, 0x01}, /* VSEN7 */ |
| 160 | {0x06, 0x01}, /* VSEN8 */ |
| 161 | {0x00, 0x02}, /* VSEN9 */ |
| 162 | {0x02, 0x02}, /* VSEN10 */ |
| 163 | {0x04, 0x02}, /* VSEN11 */ |
| 164 | {0x00, 0x03}, /* VTT */ |
| 165 | {0x02, 0x03}, /* 3VDD */ |
| 166 | {0x04, 0x03}, /* 3VSB */ |
| 167 | {0x06, 0x03}, /* VBAT */ |
| 168 | {0x06, 0x04}, /* VSEN12 */ |
| 169 | {0x06, 0x05}, /* VSEN13 */ |
| 170 | {0x06, 0x06}, /* VSEN14 */ |
| 171 | {0x06, 0x07}, /* VSEN15 */ |
| 172 | {0x06, 0x08}, /* VSEN16 */ |
| 173 | {0x06, 0x09}, /* VSEN17 */ |
| 174 | }; |
| 175 | |
| 176 | |
| 177 | /* 3VDD, 3VSB, VBAT * 0.006 */ |
| 178 | #define REST_VLT_BEGIN 12 /* the 13th volt to 15th */ |
| 179 | #define REST_VLT_END 14 /* the 13th volt to 15th */ |
| 180 | |
| 181 | #define W83795_REG_FAN(index) (0x2E + (index)) |
| 182 | #define W83795_REG_FAN_MIN_HL(index) (0xB6 + (index)) |
| 183 | #define W83795_REG_FAN_MIN_LSB(index) (0xC4 + (index) / 2) |
| 184 | #define W83795_REG_FAN_MIN_LSB_SHIFT(index) \ |
| 185 | (((index) % 1) ? 4 : 0) |
| 186 | #define W83795_REG_FAN_CTRL_SHIFT(index) \ |
| 187 | (((index) > 7) ? ((index) - 8) : (index)) |
| 188 | |
| 189 | #define W83795_REG_VID_CTRL 0x6A |
| 190 | |
| 191 | #define ALARM_BEEP_REG_NUM 6 |
| 192 | #define W83795_REG_ALARM(index) (0x41 + (index)) |
| 193 | #define W83795_REG_BEEP(index) (0x50 + (index)) |
| 194 | |
| 195 | #define W83795_REG_CLR_CHASSIS 0x4D |
| 196 | |
| 197 | |
| 198 | #define W83795_REG_TEMP_NUM 6 |
| 199 | #define W83795_REG_FCMS1 0x201 |
| 200 | #define W83795_REG_FCMS2 0x208 |
| 201 | #define W83795_REG_TFMR(index) (0x202 + (index)) |
| 202 | #define W83795_REG_FOMC 0x20F |
| 203 | #define W83795_REG_FOPFP(index) (0x218 + (index)) |
| 204 | |
| 205 | #define W83795_REG_TSS(index) (0x209 + (index)) |
| 206 | |
| 207 | #define PWM_OUTPUT 0 |
| 208 | #define PWM_START 1 |
| 209 | #define PWM_NONSTOP 2 |
| 210 | #define PWM_STOP_TIME 3 |
| 211 | #define PWM_DIV 4 |
| 212 | #define W83795_REG_PWM(index, nr) \ |
| 213 | (((nr) == 0 ? 0x210 : \ |
| 214 | (nr) == 1 ? 0x220 : \ |
| 215 | (nr) == 2 ? 0x228 : \ |
| 216 | (nr) == 3 ? 0x230 : 0x218) + (index)) |
| 217 | |
| 218 | #define W83795_REG_FOPFP_DIV(index) \ |
| 219 | (((index) < 8) ? ((index) + 1) : \ |
| 220 | ((index) == 8) ? 12 : \ |
| 221 | (16 << ((index) - 9))) |
| 222 | |
| 223 | #define W83795_REG_FTSH(index) (0x240 + (index) * 2) |
| 224 | #define W83795_REG_FTSL(index) (0x241 + (index) * 2) |
| 225 | #define W83795_REG_TFTS 0x250 |
| 226 | |
| 227 | #define TEMP_PWM_TTTI 0 |
| 228 | #define TEMP_PWM_CTFS 1 |
| 229 | #define TEMP_PWM_HCT 2 |
| 230 | #define TEMP_PWM_HOT 3 |
| 231 | #define W83795_REG_TTTI(index) (0x260 + (index)) |
| 232 | #define W83795_REG_CTFS(index) (0x268 + (index)) |
| 233 | #define W83795_REG_HT(index) (0x270 + (index)) |
| 234 | |
| 235 | #define SF4_TEMP 0 |
| 236 | #define SF4_PWM 1 |
| 237 | #define W83795_REG_SF4_TEMP(temp_num, index) \ |
| 238 | (0x280 + 0x10 * (temp_num) + (index)) |
| 239 | #define W83795_REG_SF4_PWM(temp_num, index) \ |
| 240 | (0x288 + 0x10 * (temp_num) + (index)) |
| 241 | |
| 242 | #define W83795_REG_DTSC 0x301 |
| 243 | #define W83795_REG_DTSE 0x302 |
| 244 | #define W83795_REG_DTS(index) (0x26 + (index)) |
| 245 | |
| 246 | #define DTS_CRIT 0 |
| 247 | #define DTS_CRIT_HYST 1 |
| 248 | #define DTS_WARN 2 |
| 249 | #define DTS_WARN_HYST 3 |
| 250 | #define W83795_REG_DTS_EXT(index) (0xB2 + (index)) |
| 251 | |
| 252 | #define SETUP_PWM_DEFAULT 0 |
| 253 | #define SETUP_PWM_UPTIME 1 |
| 254 | #define SETUP_PWM_DOWNTIME 2 |
| 255 | #define W83795_REG_SETUP_PWM(index) (0x20C + (index)) |
| 256 | |
| 257 | static inline u16 in_from_reg(u8 index, u16 val) |
| 258 | { |
| 259 | if ((index >= REST_VLT_BEGIN) && (index <= REST_VLT_END)) |
| 260 | return val * 6; |
| 261 | else |
| 262 | return val * 2; |
| 263 | } |
| 264 | |
| 265 | static inline u16 in_to_reg(u8 index, u16 val) |
| 266 | { |
| 267 | if ((index >= REST_VLT_BEGIN) && (index <= REST_VLT_END)) |
| 268 | return val / 6; |
| 269 | else |
| 270 | return val / 2; |
| 271 | } |
| 272 | |
| 273 | static inline unsigned long fan_from_reg(u16 val) |
| 274 | { |
| 275 | if ((val >= 0xff0) || (val == 0)) |
| 276 | return 0; |
| 277 | return 1350000UL / val; |
| 278 | } |
| 279 | |
| 280 | static inline u16 fan_to_reg(long rpm) |
| 281 | { |
| 282 | if (rpm <= 0) |
| 283 | return 0x0fff; |
| 284 | return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe); |
| 285 | } |
| 286 | |
| 287 | static inline unsigned long time_from_reg(u8 reg) |
| 288 | { |
| 289 | return reg * 100; |
| 290 | } |
| 291 | |
| 292 | static inline u8 time_to_reg(unsigned long val) |
| 293 | { |
| 294 | return SENSORS_LIMIT((val + 50) / 100, 0, 0xff); |
| 295 | } |
| 296 | |
| 297 | static inline long temp_from_reg(s8 reg) |
| 298 | { |
| 299 | return reg * 1000; |
| 300 | } |
| 301 | |
| 302 | static inline s8 temp_to_reg(long val, s8 min, s8 max) |
| 303 | { |
| 304 | return SENSORS_LIMIT((val < 0 ? -val : val) / 1000, min, max); |
| 305 | } |
| 306 | |
| 307 | |
| 308 | enum chip_types {w83795g, w83795adg}; |
| 309 | |
| 310 | struct w83795_data { |
| 311 | struct device *hwmon_dev; |
| 312 | struct mutex update_lock; |
| 313 | unsigned long last_updated; /* In jiffies */ |
| 314 | enum chip_types chip_type; |
| 315 | |
| 316 | u8 bank; |
| 317 | |
| 318 | u32 has_in; /* Enable monitor VIN or not */ |
| 319 | u16 in[21][3]; /* Register value, read/high/low */ |
| 320 | u8 in_lsb[10][3]; /* LSB Register value, high/low */ |
| 321 | u8 has_gain; /* has gain: in17-20 * 8 */ |
| 322 | |
| 323 | u16 has_fan; /* Enable fan14-1 or not */ |
| 324 | u16 fan[14]; /* Register value combine */ |
| 325 | u16 fan_min[14]; /* Register value combine */ |
| 326 | |
| 327 | u8 has_temp; /* Enable monitor temp6-1 or not */ |
| 328 | u8 temp[6][5]; /* current, crit, crit_hyst, warn, warn_hyst */ |
| 329 | u8 temp_read_vrlsb[6]; |
| 330 | u8 temp_mode; /* bit 0: TR mode, bit 1: TD mode */ |
| 331 | u8 temp_src[3]; /* Register value */ |
| 332 | |
| 333 | u8 enable_dts; /* Enable PECI and SB-TSI, |
| 334 | * bit 0: =1 enable, =0 disable, |
| 335 | * bit 1: =1 AMD SB-TSI, =0 Intel PECI */ |
| 336 | u8 has_dts; /* Enable monitor DTS temp */ |
| 337 | u8 dts[8]; /* Register value */ |
| 338 | u8 dts_read_vrlsb[8]; /* Register value */ |
| 339 | u8 dts_ext[4]; /* Register value */ |
| 340 | |
| 341 | u8 has_pwm; /* 795g supports 8 pwm, 795adg only supports 2, |
| 342 | * no config register, only affected by chip |
| 343 | * type */ |
| 344 | u8 pwm[8][5]; /* Register value, output, start, non stop, stop |
| 345 | * time, div */ |
| 346 | u8 pwm_fcms[2]; /* Register value */ |
| 347 | u8 pwm_tfmr[6]; /* Register value */ |
| 348 | u8 pwm_fomc; /* Register value */ |
| 349 | |
| 350 | u16 target_speed[8]; /* Register value, target speed for speed |
| 351 | * cruise */ |
| 352 | u8 tol_speed; /* tolerance of target speed */ |
| 353 | u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */ |
| 354 | u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */ |
| 355 | |
| 356 | u8 setup_pwm[3]; /* Register value */ |
| 357 | |
| 358 | u8 alarms[6]; /* Register value */ |
| 359 | u8 beeps[6]; /* Register value */ |
| 360 | u8 beep_enable; |
| 361 | |
| 362 | char valid; |
| 363 | }; |
| 364 | |
| 365 | /* |
| 366 | * Hardware access |
| 367 | */ |
| 368 | |
| 369 | /* Ignore the possibility that somebody change bank outside the driver |
| 370 | * Must be called with data->update_lock held, except during initialization */ |
| 371 | static u8 w83795_read(struct i2c_client *client, u16 reg) |
| 372 | { |
| 373 | struct w83795_data *data = i2c_get_clientdata(client); |
| 374 | u8 res = 0xff; |
| 375 | u8 new_bank = reg >> 8; |
| 376 | |
| 377 | new_bank |= data->bank & 0xfc; |
| 378 | if (data->bank != new_bank) { |
| 379 | if (i2c_smbus_write_byte_data |
| 380 | (client, W83795_REG_BANKSEL, new_bank) >= 0) |
| 381 | data->bank = new_bank; |
| 382 | else { |
| 383 | dev_err(&client->dev, |
| 384 | "set bank to %d failed, fall back " |
| 385 | "to bank %d, read reg 0x%x error\n", |
| 386 | new_bank, data->bank, reg); |
| 387 | res = 0x0; /* read 0x0 from the chip */ |
| 388 | goto END; |
| 389 | } |
| 390 | } |
| 391 | res = i2c_smbus_read_byte_data(client, reg & 0xff); |
| 392 | END: |
| 393 | return res; |
| 394 | } |
| 395 | |
| 396 | /* Must be called with data->update_lock held, except during initialization */ |
| 397 | static int w83795_write(struct i2c_client *client, u16 reg, u8 value) |
| 398 | { |
| 399 | struct w83795_data *data = i2c_get_clientdata(client); |
| 400 | int res; |
| 401 | u8 new_bank = reg >> 8; |
| 402 | |
| 403 | new_bank |= data->bank & 0xfc; |
| 404 | if (data->bank != new_bank) { |
| 405 | res = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, |
| 406 | new_bank); |
| 407 | if (res >= 0) |
| 408 | data->bank = new_bank; |
| 409 | else { |
| 410 | dev_err(&client->dev, |
| 411 | "set bank to %d failed, fall back " |
| 412 | "to bank %d, write reg 0x%x error\n", |
| 413 | new_bank, data->bank, reg); |
| 414 | goto END; |
| 415 | } |
| 416 | } |
| 417 | |
| 418 | res = i2c_smbus_write_byte_data(client, reg & 0xff, value); |
| 419 | END: |
| 420 | return res; |
| 421 | } |
| 422 | |
| 423 | static struct w83795_data *w83795_update_device(struct device *dev) |
| 424 | { |
| 425 | struct i2c_client *client = to_i2c_client(dev); |
| 426 | struct w83795_data *data = i2c_get_clientdata(client); |
| 427 | u16 tmp; |
| 428 | int i; |
| 429 | |
| 430 | mutex_lock(&data->update_lock); |
| 431 | |
| 432 | if (!(time_after(jiffies, data->last_updated + HZ * 2) |
| 433 | || !data->valid)) |
| 434 | goto END; |
| 435 | |
| 436 | /* Update the voltages value */ |
| 437 | for (i = 0; i < ARRAY_SIZE(data->in); i++) { |
| 438 | if (!(data->has_in & (1 << i))) |
| 439 | continue; |
| 440 | tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2; |
| 441 | tmp |= (w83795_read(client, W83795_REG_VRLSB) |
| 442 | >> VRLSB_SHIFT) & 0x03; |
| 443 | data->in[i][IN_READ] = tmp; |
| 444 | } |
| 445 | |
| 446 | /* Update fan */ |
| 447 | for (i = 0; i < ARRAY_SIZE(data->fan); i++) { |
| 448 | if (!(data->has_fan & (1 << i))) |
| 449 | continue; |
| 450 | data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4; |
| 451 | data->fan[i] |= |
| 452 | (w83795_read(client, W83795_REG_VRLSB >> 4)) & 0x0F; |
| 453 | } |
| 454 | |
| 455 | /* Update temperature */ |
| 456 | for (i = 0; i < ARRAY_SIZE(data->temp); i++) { |
| 457 | /* even stop monitor, register still keep value, just read out |
| 458 | * it */ |
| 459 | if (!(data->has_temp & (1 << i))) { |
| 460 | data->temp[i][TEMP_READ] = 0; |
| 461 | data->temp_read_vrlsb[i] = 0; |
| 462 | continue; |
| 463 | } |
| 464 | data->temp[i][TEMP_READ] = |
| 465 | w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]); |
| 466 | data->temp_read_vrlsb[i] = |
| 467 | w83795_read(client, W83795_REG_VRLSB); |
| 468 | } |
| 469 | |
| 470 | /* Update dts temperature */ |
| 471 | if (data->enable_dts != 0) { |
| 472 | for (i = 0; i < ARRAY_SIZE(data->dts); i++) { |
| 473 | if (!(data->has_dts & (1 << i))) |
| 474 | continue; |
| 475 | data->dts[i] = |
| 476 | w83795_read(client, W83795_REG_DTS(i)); |
| 477 | data->dts_read_vrlsb[i] = |
| 478 | w83795_read(client, W83795_REG_VRLSB); |
| 479 | } |
| 480 | } |
| 481 | |
| 482 | /* Update pwm output */ |
| 483 | for (i = 0; i < data->has_pwm; i++) { |
| 484 | data->pwm[i][PWM_OUTPUT] = |
| 485 | w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT)); |
| 486 | } |
| 487 | |
| 488 | /* update alarm */ |
| 489 | for (i = 0; i < ALARM_BEEP_REG_NUM; i++) |
| 490 | data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i)); |
| 491 | |
| 492 | data->last_updated = jiffies; |
| 493 | data->valid = 1; |
| 494 | |
| 495 | END: |
| 496 | mutex_unlock(&data->update_lock); |
| 497 | return data; |
| 498 | } |
| 499 | |
| 500 | /* |
| 501 | * Sysfs attributes |
| 502 | */ |
| 503 | |
| 504 | #define ALARM_STATUS 0 |
| 505 | #define BEEP_ENABLE 1 |
| 506 | static ssize_t |
| 507 | show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf) |
| 508 | { |
| 509 | struct w83795_data *data = w83795_update_device(dev); |
| 510 | struct sensor_device_attribute_2 *sensor_attr = |
| 511 | to_sensor_dev_attr_2(attr); |
| 512 | int nr = sensor_attr->nr; |
| 513 | int index = sensor_attr->index >> 3; |
| 514 | int bit = sensor_attr->index & 0x07; |
| 515 | u8 val; |
| 516 | |
| 517 | if (ALARM_STATUS == nr) { |
| 518 | val = (data->alarms[index] >> (bit)) & 1; |
| 519 | } else { /* BEEP_ENABLE */ |
| 520 | val = (data->beeps[index] >> (bit)) & 1; |
| 521 | } |
| 522 | |
| 523 | return sprintf(buf, "%u\n", val); |
| 524 | } |
| 525 | |
| 526 | static ssize_t |
| 527 | store_beep(struct device *dev, struct device_attribute *attr, |
| 528 | const char *buf, size_t count) |
| 529 | { |
| 530 | struct i2c_client *client = to_i2c_client(dev); |
| 531 | struct w83795_data *data = i2c_get_clientdata(client); |
| 532 | struct sensor_device_attribute_2 *sensor_attr = |
| 533 | to_sensor_dev_attr_2(attr); |
| 534 | int index = sensor_attr->index >> 3; |
| 535 | int shift = sensor_attr->index & 0x07; |
| 536 | u8 beep_bit = 1 << shift; |
| 537 | unsigned long val; |
| 538 | |
| 539 | if (strict_strtoul(buf, 10, &val) < 0) |
| 540 | return -EINVAL; |
| 541 | if (val != 0 && val != 1) |
| 542 | return -EINVAL; |
| 543 | |
| 544 | mutex_lock(&data->update_lock); |
| 545 | data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index)); |
| 546 | data->beeps[index] &= ~beep_bit; |
| 547 | data->beeps[index] |= val << shift; |
| 548 | w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]); |
| 549 | mutex_unlock(&data->update_lock); |
| 550 | |
| 551 | return count; |
| 552 | } |
| 553 | |
| 554 | static ssize_t |
| 555 | show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf) |
| 556 | { |
| 557 | struct i2c_client *client = to_i2c_client(dev); |
| 558 | struct w83795_data *data = i2c_get_clientdata(client); |
| 559 | return sprintf(buf, "%u\n", data->beep_enable); |
| 560 | } |
| 561 | |
| 562 | static ssize_t |
| 563 | store_beep_enable(struct device *dev, struct device_attribute *attr, |
| 564 | const char *buf, size_t count) |
| 565 | { |
| 566 | struct i2c_client *client = to_i2c_client(dev); |
| 567 | struct w83795_data *data = i2c_get_clientdata(client); |
| 568 | unsigned long val; |
| 569 | u8 tmp; |
| 570 | |
| 571 | if (strict_strtoul(buf, 10, &val) < 0) |
| 572 | return -EINVAL; |
| 573 | if (val != 0 && val != 1) |
| 574 | return -EINVAL; |
| 575 | |
| 576 | mutex_lock(&data->update_lock); |
| 577 | data->beep_enable = val; |
| 578 | tmp = w83795_read(client, W83795_REG_BEEP(5)); |
| 579 | tmp &= 0x7f; |
| 580 | tmp |= val << 7; |
| 581 | w83795_write(client, W83795_REG_BEEP(5), tmp); |
| 582 | mutex_unlock(&data->update_lock); |
| 583 | |
| 584 | return count; |
| 585 | } |
| 586 | |
| 587 | /* Write any value to clear chassis alarm */ |
| 588 | static ssize_t |
| 589 | store_chassis_clear(struct device *dev, |
| 590 | struct device_attribute *attr, const char *buf, |
| 591 | size_t count) |
| 592 | { |
| 593 | struct i2c_client *client = to_i2c_client(dev); |
| 594 | struct w83795_data *data = i2c_get_clientdata(client); |
| 595 | u8 val; |
| 596 | |
| 597 | mutex_lock(&data->update_lock); |
| 598 | val = w83795_read(client, W83795_REG_CLR_CHASSIS); |
| 599 | val |= 0x80; |
| 600 | w83795_write(client, W83795_REG_CLR_CHASSIS, val); |
| 601 | mutex_unlock(&data->update_lock); |
| 602 | return count; |
| 603 | } |
| 604 | |
| 605 | #define FAN_INPUT 0 |
| 606 | #define FAN_MIN 1 |
| 607 | static ssize_t |
| 608 | show_fan(struct device *dev, struct device_attribute *attr, char *buf) |
| 609 | { |
| 610 | struct sensor_device_attribute_2 *sensor_attr = |
| 611 | to_sensor_dev_attr_2(attr); |
| 612 | int nr = sensor_attr->nr; |
| 613 | int index = sensor_attr->index; |
| 614 | struct w83795_data *data = w83795_update_device(dev); |
| 615 | u16 val; |
| 616 | |
| 617 | if (FAN_INPUT == nr) |
| 618 | val = data->fan[index] & 0x0fff; |
| 619 | else |
| 620 | val = data->fan_min[index] & 0x0fff; |
| 621 | |
| 622 | return sprintf(buf, "%lu\n", fan_from_reg(val)); |
| 623 | } |
| 624 | |
| 625 | static ssize_t |
| 626 | store_fan_min(struct device *dev, struct device_attribute *attr, |
| 627 | const char *buf, size_t count) |
| 628 | { |
| 629 | struct sensor_device_attribute_2 *sensor_attr = |
| 630 | to_sensor_dev_attr_2(attr); |
| 631 | int index = sensor_attr->index; |
| 632 | struct i2c_client *client = to_i2c_client(dev); |
| 633 | struct w83795_data *data = i2c_get_clientdata(client); |
| 634 | unsigned long val; |
| 635 | |
| 636 | if (strict_strtoul(buf, 10, &val)) |
| 637 | return -EINVAL; |
| 638 | val = fan_to_reg(val); |
| 639 | |
| 640 | mutex_lock(&data->update_lock); |
| 641 | data->fan_min[index] = val; |
| 642 | w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff); |
| 643 | val &= 0x0f; |
| 644 | if (index % 1) { |
| 645 | val <<= 4; |
| 646 | val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index)) |
| 647 | & 0x0f; |
| 648 | } else { |
| 649 | val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index)) |
| 650 | & 0xf0; |
| 651 | } |
| 652 | w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff); |
| 653 | mutex_unlock(&data->update_lock); |
| 654 | |
| 655 | return count; |
| 656 | } |
| 657 | |
| 658 | static ssize_t |
| 659 | show_pwm(struct device *dev, struct device_attribute *attr, char *buf) |
| 660 | { |
| 661 | struct w83795_data *data = w83795_update_device(dev); |
| 662 | struct sensor_device_attribute_2 *sensor_attr = |
| 663 | to_sensor_dev_attr_2(attr); |
| 664 | int nr = sensor_attr->nr; |
| 665 | int index = sensor_attr->index; |
| 666 | u16 val; |
| 667 | |
| 668 | switch (nr) { |
| 669 | case PWM_STOP_TIME: |
| 670 | val = time_from_reg(data->pwm[index][nr]); |
| 671 | break; |
| 672 | case PWM_DIV: |
| 673 | val = W83795_REG_FOPFP_DIV(data->pwm[index][nr] & 0x0f); |
| 674 | break; |
| 675 | default: |
| 676 | val = data->pwm[index][nr]; |
| 677 | break; |
| 678 | } |
| 679 | |
| 680 | return sprintf(buf, "%u\n", val); |
| 681 | } |
| 682 | |
| 683 | static ssize_t |
| 684 | store_pwm(struct device *dev, struct device_attribute *attr, |
| 685 | const char *buf, size_t count) |
| 686 | { |
| 687 | struct i2c_client *client = to_i2c_client(dev); |
| 688 | struct w83795_data *data = i2c_get_clientdata(client); |
| 689 | struct sensor_device_attribute_2 *sensor_attr = |
| 690 | to_sensor_dev_attr_2(attr); |
| 691 | int nr = sensor_attr->nr; |
| 692 | int index = sensor_attr->index; |
| 693 | unsigned long val; |
| 694 | int i; |
| 695 | |
| 696 | if (strict_strtoul(buf, 10, &val) < 0) |
| 697 | return -EINVAL; |
| 698 | |
| 699 | mutex_lock(&data->update_lock); |
| 700 | switch (nr) { |
| 701 | case PWM_STOP_TIME: |
| 702 | val = time_to_reg(val); |
| 703 | break; |
| 704 | case PWM_DIV: |
| 705 | for (i = 0; i < 16; i++) { |
| 706 | if (W83795_REG_FOPFP_DIV(i) == val) { |
| 707 | val = i; |
| 708 | break; |
| 709 | } |
| 710 | } |
| 711 | if (i >= 16) |
| 712 | goto err_end; |
| 713 | val |= w83795_read(client, W83795_REG_PWM(index, nr)) & 0x80; |
| 714 | break; |
| 715 | default: |
| 716 | val = SENSORS_LIMIT(val, 0, 0xff); |
| 717 | break; |
| 718 | } |
| 719 | w83795_write(client, W83795_REG_PWM(index, nr), val); |
| 720 | data->pwm[index][nr] = val & 0xff; |
| 721 | mutex_unlock(&data->update_lock); |
| 722 | return count; |
| 723 | err_end: |
| 724 | mutex_unlock(&data->update_lock); |
| 725 | return -EINVAL; |
| 726 | } |
| 727 | |
| 728 | static ssize_t |
| 729 | show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) |
| 730 | { |
| 731 | struct sensor_device_attribute_2 *sensor_attr = |
| 732 | to_sensor_dev_attr_2(attr); |
| 733 | struct i2c_client *client = to_i2c_client(dev); |
| 734 | struct w83795_data *data = i2c_get_clientdata(client); |
| 735 | int index = sensor_attr->index; |
| 736 | u8 tmp; |
| 737 | |
| 738 | if (1 == (data->pwm_fcms[0] & (1 << index))) { |
| 739 | tmp = 2; |
| 740 | goto out; |
| 741 | } |
| 742 | for (tmp = 0; tmp < 6; tmp++) { |
| 743 | if (data->pwm_tfmr[tmp] & (1 << index)) { |
| 744 | tmp = 3; |
| 745 | goto out; |
| 746 | } |
| 747 | } |
| 748 | if (data->pwm_fomc & (1 << index)) |
| 749 | tmp = 0; |
| 750 | else |
| 751 | tmp = 1; |
| 752 | |
| 753 | out: |
| 754 | return sprintf(buf, "%u\n", tmp); |
| 755 | } |
| 756 | |
| 757 | static ssize_t |
| 758 | store_pwm_enable(struct device *dev, struct device_attribute *attr, |
| 759 | const char *buf, size_t count) |
| 760 | { |
| 761 | struct i2c_client *client = to_i2c_client(dev); |
| 762 | struct w83795_data *data = i2c_get_clientdata(client); |
| 763 | struct sensor_device_attribute_2 *sensor_attr = |
| 764 | to_sensor_dev_attr_2(attr); |
| 765 | int index = sensor_attr->index; |
| 766 | unsigned long val; |
| 767 | int i; |
| 768 | |
| 769 | if (strict_strtoul(buf, 10, &val) < 0) |
| 770 | return -EINVAL; |
| 771 | if (val > 2) |
| 772 | return -EINVAL; |
| 773 | |
| 774 | mutex_lock(&data->update_lock); |
| 775 | switch (val) { |
| 776 | case 0: |
| 777 | case 1: |
| 778 | data->pwm_fcms[0] &= ~(1 << index); |
| 779 | w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]); |
| 780 | for (i = 0; i < 6; i++) { |
| 781 | data->pwm_tfmr[i] &= ~(1 << index); |
| 782 | w83795_write(client, W83795_REG_TFMR(i), |
| 783 | data->pwm_tfmr[i]); |
| 784 | } |
| 785 | data->pwm_fomc |= 1 << index; |
| 786 | data->pwm_fomc ^= val << index; |
| 787 | w83795_write(client, W83795_REG_FOMC, data->pwm_fomc); |
| 788 | break; |
| 789 | case 2: |
| 790 | data->pwm_fcms[0] |= (1 << index); |
| 791 | w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]); |
| 792 | break; |
| 793 | } |
| 794 | mutex_unlock(&data->update_lock); |
| 795 | return count; |
| 796 | |
| 797 | mutex_unlock(&data->update_lock); |
| 798 | return -EINVAL; |
| 799 | } |
| 800 | |
| 801 | static ssize_t |
| 802 | show_temp_src(struct device *dev, struct device_attribute *attr, char *buf) |
| 803 | { |
| 804 | struct sensor_device_attribute_2 *sensor_attr = |
| 805 | to_sensor_dev_attr_2(attr); |
| 806 | struct i2c_client *client = to_i2c_client(dev); |
| 807 | struct w83795_data *data = i2c_get_clientdata(client); |
| 808 | int index = sensor_attr->index; |
| 809 | u8 val = index / 2; |
| 810 | u8 tmp = data->temp_src[val]; |
| 811 | |
| 812 | if (index % 1) |
| 813 | val = 4; |
| 814 | else |
| 815 | val = 0; |
| 816 | tmp >>= val; |
| 817 | tmp &= 0x0f; |
| 818 | |
| 819 | return sprintf(buf, "%u\n", tmp); |
| 820 | } |
| 821 | |
| 822 | static ssize_t |
| 823 | store_temp_src(struct device *dev, struct device_attribute *attr, |
| 824 | const char *buf, size_t count) |
| 825 | { |
| 826 | struct i2c_client *client = to_i2c_client(dev); |
| 827 | struct w83795_data *data = i2c_get_clientdata(client); |
| 828 | struct sensor_device_attribute_2 *sensor_attr = |
| 829 | to_sensor_dev_attr_2(attr); |
| 830 | int index = sensor_attr->index; |
| 831 | unsigned long tmp; |
| 832 | u8 val = index / 2; |
| 833 | |
| 834 | if (strict_strtoul(buf, 10, &tmp) < 0) |
| 835 | return -EINVAL; |
| 836 | tmp = SENSORS_LIMIT(tmp, 0, 15); |
| 837 | |
| 838 | mutex_lock(&data->update_lock); |
| 839 | if (index % 1) { |
| 840 | tmp <<= 4; |
| 841 | data->temp_src[val] &= 0x0f; |
| 842 | } else { |
| 843 | data->temp_src[val] &= 0xf0; |
| 844 | } |
| 845 | data->temp_src[val] |= tmp; |
| 846 | w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]); |
| 847 | mutex_unlock(&data->update_lock); |
| 848 | |
| 849 | return count; |
| 850 | } |
| 851 | |
| 852 | #define TEMP_PWM_ENABLE 0 |
| 853 | #define TEMP_PWM_FAN_MAP 1 |
| 854 | static ssize_t |
| 855 | show_temp_pwm_enable(struct device *dev, struct device_attribute *attr, |
| 856 | char *buf) |
| 857 | { |
| 858 | struct i2c_client *client = to_i2c_client(dev); |
| 859 | struct w83795_data *data = i2c_get_clientdata(client); |
| 860 | struct sensor_device_attribute_2 *sensor_attr = |
| 861 | to_sensor_dev_attr_2(attr); |
| 862 | int nr = sensor_attr->nr; |
| 863 | int index = sensor_attr->index; |
| 864 | u8 tmp = 0xff; |
| 865 | |
| 866 | switch (nr) { |
| 867 | case TEMP_PWM_ENABLE: |
| 868 | tmp = (data->pwm_fcms[1] >> index) & 1; |
| 869 | if (tmp) |
| 870 | tmp = 4; |
| 871 | else |
| 872 | tmp = 3; |
| 873 | break; |
| 874 | case TEMP_PWM_FAN_MAP: |
| 875 | tmp = data->pwm_tfmr[index]; |
| 876 | break; |
| 877 | } |
| 878 | |
| 879 | return sprintf(buf, "%u\n", tmp); |
| 880 | } |
| 881 | |
| 882 | static ssize_t |
| 883 | store_temp_pwm_enable(struct device *dev, struct device_attribute *attr, |
| 884 | const char *buf, size_t count) |
| 885 | { |
| 886 | struct i2c_client *client = to_i2c_client(dev); |
| 887 | struct w83795_data *data = i2c_get_clientdata(client); |
| 888 | struct sensor_device_attribute_2 *sensor_attr = |
| 889 | to_sensor_dev_attr_2(attr); |
| 890 | int nr = sensor_attr->nr; |
| 891 | int index = sensor_attr->index; |
| 892 | unsigned long tmp; |
| 893 | |
| 894 | if (strict_strtoul(buf, 10, &tmp) < 0) |
| 895 | return -EINVAL; |
| 896 | |
| 897 | switch (nr) { |
| 898 | case TEMP_PWM_ENABLE: |
| 899 | if ((tmp != 3) && (tmp != 4)) |
| 900 | return -EINVAL; |
| 901 | tmp -= 3; |
| 902 | mutex_lock(&data->update_lock); |
| 903 | data->pwm_fcms[1] &= ~(1 << index); |
| 904 | data->pwm_fcms[1] |= tmp << index; |
| 905 | w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]); |
| 906 | mutex_unlock(&data->update_lock); |
| 907 | break; |
| 908 | case TEMP_PWM_FAN_MAP: |
| 909 | mutex_lock(&data->update_lock); |
| 910 | tmp = SENSORS_LIMIT(tmp, 0, 0xff); |
| 911 | w83795_write(client, W83795_REG_TFMR(index), tmp); |
| 912 | data->pwm_tfmr[index] = tmp; |
| 913 | mutex_unlock(&data->update_lock); |
| 914 | break; |
| 915 | } |
| 916 | return count; |
| 917 | } |
| 918 | |
| 919 | #define FANIN_TARGET 0 |
| 920 | #define FANIN_TOL 1 |
| 921 | static ssize_t |
| 922 | show_fanin(struct device *dev, struct device_attribute *attr, char *buf) |
| 923 | { |
| 924 | struct i2c_client *client = to_i2c_client(dev); |
| 925 | struct w83795_data *data = i2c_get_clientdata(client); |
| 926 | struct sensor_device_attribute_2 *sensor_attr = |
| 927 | to_sensor_dev_attr_2(attr); |
| 928 | int nr = sensor_attr->nr; |
| 929 | int index = sensor_attr->index; |
| 930 | u16 tmp = 0; |
| 931 | |
| 932 | switch (nr) { |
| 933 | case FANIN_TARGET: |
| 934 | tmp = fan_from_reg(data->target_speed[index]); |
| 935 | break; |
| 936 | case FANIN_TOL: |
| 937 | tmp = data->tol_speed; |
| 938 | break; |
| 939 | } |
| 940 | |
| 941 | return sprintf(buf, "%u\n", tmp); |
| 942 | } |
| 943 | |
| 944 | static ssize_t |
| 945 | store_fanin(struct device *dev, struct device_attribute *attr, |
| 946 | const char *buf, size_t count) |
| 947 | { |
| 948 | struct i2c_client *client = to_i2c_client(dev); |
| 949 | struct w83795_data *data = i2c_get_clientdata(client); |
| 950 | struct sensor_device_attribute_2 *sensor_attr = |
| 951 | to_sensor_dev_attr_2(attr); |
| 952 | int nr = sensor_attr->nr; |
| 953 | int index = sensor_attr->index; |
| 954 | unsigned long val; |
| 955 | |
| 956 | if (strict_strtoul(buf, 10, &val) < 0) |
| 957 | return -EINVAL; |
| 958 | |
| 959 | mutex_lock(&data->update_lock); |
| 960 | switch (nr) { |
| 961 | case FANIN_TARGET: |
| 962 | val = fan_to_reg(SENSORS_LIMIT(val, 0, 0xfff)); |
| 963 | w83795_write(client, W83795_REG_FTSH(index), (val >> 4) & 0xff); |
| 964 | w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0); |
| 965 | data->target_speed[index] = val; |
| 966 | break; |
| 967 | case FANIN_TOL: |
| 968 | val = SENSORS_LIMIT(val, 0, 0x3f); |
| 969 | w83795_write(client, W83795_REG_TFTS, val); |
| 970 | data->tol_speed = val; |
| 971 | break; |
| 972 | } |
| 973 | mutex_unlock(&data->update_lock); |
| 974 | |
| 975 | return count; |
| 976 | } |
| 977 | |
| 978 | |
| 979 | static ssize_t |
| 980 | show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf) |
| 981 | { |
| 982 | struct i2c_client *client = to_i2c_client(dev); |
| 983 | struct w83795_data *data = i2c_get_clientdata(client); |
| 984 | struct sensor_device_attribute_2 *sensor_attr = |
| 985 | to_sensor_dev_attr_2(attr); |
| 986 | int nr = sensor_attr->nr; |
| 987 | int index = sensor_attr->index; |
| 988 | long tmp = temp_from_reg(data->pwm_temp[index][nr]); |
| 989 | |
| 990 | return sprintf(buf, "%ld\n", tmp); |
| 991 | } |
| 992 | |
| 993 | static ssize_t |
| 994 | store_temp_pwm(struct device *dev, struct device_attribute *attr, |
| 995 | const char *buf, size_t count) |
| 996 | { |
| 997 | struct i2c_client *client = to_i2c_client(dev); |
| 998 | struct w83795_data *data = i2c_get_clientdata(client); |
| 999 | struct sensor_device_attribute_2 *sensor_attr = |
| 1000 | to_sensor_dev_attr_2(attr); |
| 1001 | int nr = sensor_attr->nr; |
| 1002 | int index = sensor_attr->index; |
| 1003 | unsigned long val; |
| 1004 | u8 tmp; |
| 1005 | |
| 1006 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1007 | return -EINVAL; |
| 1008 | val /= 1000; |
| 1009 | |
| 1010 | mutex_lock(&data->update_lock); |
| 1011 | switch (nr) { |
| 1012 | case TEMP_PWM_TTTI: |
| 1013 | val = SENSORS_LIMIT(val, 0, 0x7f); |
| 1014 | w83795_write(client, W83795_REG_TTTI(index), val); |
| 1015 | break; |
| 1016 | case TEMP_PWM_CTFS: |
| 1017 | val = SENSORS_LIMIT(val, 0, 0x7f); |
| 1018 | w83795_write(client, W83795_REG_CTFS(index), val); |
| 1019 | break; |
| 1020 | case TEMP_PWM_HCT: |
| 1021 | val = SENSORS_LIMIT(val, 0, 0x0f); |
| 1022 | tmp = w83795_read(client, W83795_REG_HT(index)); |
| 1023 | tmp &= 0x0f; |
| 1024 | tmp |= (val << 4) & 0xf0; |
| 1025 | w83795_write(client, W83795_REG_HT(index), tmp); |
| 1026 | break; |
| 1027 | case TEMP_PWM_HOT: |
| 1028 | val = SENSORS_LIMIT(val, 0, 0x0f); |
| 1029 | tmp = w83795_read(client, W83795_REG_HT(index)); |
| 1030 | tmp &= 0xf0; |
| 1031 | tmp |= val & 0x0f; |
| 1032 | w83795_write(client, W83795_REG_HT(index), tmp); |
| 1033 | break; |
| 1034 | } |
| 1035 | data->pwm_temp[index][nr] = val; |
| 1036 | mutex_unlock(&data->update_lock); |
| 1037 | |
| 1038 | return count; |
| 1039 | } |
| 1040 | |
| 1041 | static ssize_t |
| 1042 | show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf) |
| 1043 | { |
| 1044 | struct i2c_client *client = to_i2c_client(dev); |
| 1045 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1046 | struct sensor_device_attribute_2 *sensor_attr = |
| 1047 | to_sensor_dev_attr_2(attr); |
| 1048 | int nr = sensor_attr->nr; |
| 1049 | int index = sensor_attr->index; |
| 1050 | |
| 1051 | return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]); |
| 1052 | } |
| 1053 | |
| 1054 | static ssize_t |
| 1055 | store_sf4_pwm(struct device *dev, struct device_attribute *attr, |
| 1056 | const char *buf, size_t count) |
| 1057 | { |
| 1058 | struct i2c_client *client = to_i2c_client(dev); |
| 1059 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1060 | struct sensor_device_attribute_2 *sensor_attr = |
| 1061 | to_sensor_dev_attr_2(attr); |
| 1062 | int nr = sensor_attr->nr; |
| 1063 | int index = sensor_attr->index; |
| 1064 | unsigned long val; |
| 1065 | |
| 1066 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1067 | return -EINVAL; |
| 1068 | |
| 1069 | mutex_lock(&data->update_lock); |
| 1070 | w83795_write(client, W83795_REG_SF4_PWM(index, nr), val); |
| 1071 | data->sf4_reg[index][SF4_PWM][nr] = val; |
| 1072 | mutex_unlock(&data->update_lock); |
| 1073 | |
| 1074 | return count; |
| 1075 | } |
| 1076 | |
| 1077 | static ssize_t |
| 1078 | show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| 1079 | { |
| 1080 | struct i2c_client *client = to_i2c_client(dev); |
| 1081 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1082 | struct sensor_device_attribute_2 *sensor_attr = |
| 1083 | to_sensor_dev_attr_2(attr); |
| 1084 | int nr = sensor_attr->nr; |
| 1085 | int index = sensor_attr->index; |
| 1086 | |
| 1087 | return sprintf(buf, "%u\n", |
| 1088 | (data->sf4_reg[index][SF4_TEMP][nr]) * 1000); |
| 1089 | } |
| 1090 | |
| 1091 | static ssize_t |
| 1092 | store_sf4_temp(struct device *dev, struct device_attribute *attr, |
| 1093 | const char *buf, size_t count) |
| 1094 | { |
| 1095 | struct i2c_client *client = to_i2c_client(dev); |
| 1096 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1097 | struct sensor_device_attribute_2 *sensor_attr = |
| 1098 | to_sensor_dev_attr_2(attr); |
| 1099 | int nr = sensor_attr->nr; |
| 1100 | int index = sensor_attr->index; |
| 1101 | unsigned long val; |
| 1102 | |
| 1103 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1104 | return -EINVAL; |
| 1105 | val /= 1000; |
| 1106 | |
| 1107 | mutex_lock(&data->update_lock); |
| 1108 | w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val); |
| 1109 | data->sf4_reg[index][SF4_TEMP][nr] = val; |
| 1110 | mutex_unlock(&data->update_lock); |
| 1111 | |
| 1112 | return count; |
| 1113 | } |
| 1114 | |
| 1115 | |
| 1116 | static ssize_t |
| 1117 | show_temp(struct device *dev, struct device_attribute *attr, char *buf) |
| 1118 | { |
| 1119 | struct sensor_device_attribute_2 *sensor_attr = |
| 1120 | to_sensor_dev_attr_2(attr); |
| 1121 | int nr = sensor_attr->nr; |
| 1122 | int index = sensor_attr->index; |
| 1123 | struct w83795_data *data = w83795_update_device(dev); |
| 1124 | long temp = temp_from_reg(data->temp[index][nr] & 0x7f); |
| 1125 | |
| 1126 | if (TEMP_READ == nr) |
| 1127 | temp += ((data->temp_read_vrlsb[index] >> VRLSB_SHIFT) & 0x03) |
| 1128 | * 250; |
| 1129 | if (data->temp[index][nr] & 0x80) |
| 1130 | temp = -temp; |
| 1131 | return sprintf(buf, "%ld\n", temp); |
| 1132 | } |
| 1133 | |
| 1134 | static ssize_t |
| 1135 | store_temp(struct device *dev, struct device_attribute *attr, |
| 1136 | const char *buf, size_t count) |
| 1137 | { |
| 1138 | struct sensor_device_attribute_2 *sensor_attr = |
| 1139 | to_sensor_dev_attr_2(attr); |
| 1140 | int nr = sensor_attr->nr; |
| 1141 | int index = sensor_attr->index; |
| 1142 | struct i2c_client *client = to_i2c_client(dev); |
| 1143 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1144 | long tmp; |
| 1145 | |
| 1146 | if (strict_strtol(buf, 10, &tmp) < 0) |
| 1147 | return -EINVAL; |
| 1148 | |
| 1149 | mutex_lock(&data->update_lock); |
| 1150 | data->temp[index][nr] = temp_to_reg(tmp, -128, 127); |
| 1151 | w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]); |
| 1152 | mutex_unlock(&data->update_lock); |
| 1153 | return count; |
| 1154 | } |
| 1155 | |
| 1156 | |
| 1157 | static ssize_t |
| 1158 | show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf) |
| 1159 | { |
| 1160 | struct i2c_client *client = to_i2c_client(dev); |
| 1161 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1162 | struct sensor_device_attribute_2 *sensor_attr = |
| 1163 | to_sensor_dev_attr_2(attr); |
| 1164 | int index = sensor_attr->index; |
| 1165 | u8 tmp; |
| 1166 | |
| 1167 | if (data->enable_dts == 0) |
| 1168 | return sprintf(buf, "%d\n", 0); |
| 1169 | |
| 1170 | if ((data->has_dts >> index) & 0x01) { |
| 1171 | if (data->enable_dts & 2) |
| 1172 | tmp = 5; |
| 1173 | else |
| 1174 | tmp = 6; |
| 1175 | } else { |
| 1176 | tmp = 0; |
| 1177 | } |
| 1178 | |
| 1179 | return sprintf(buf, "%d\n", tmp); |
| 1180 | } |
| 1181 | |
| 1182 | static ssize_t |
| 1183 | show_dts(struct device *dev, struct device_attribute *attr, char *buf) |
| 1184 | { |
| 1185 | struct sensor_device_attribute_2 *sensor_attr = |
| 1186 | to_sensor_dev_attr_2(attr); |
| 1187 | int index = sensor_attr->index; |
| 1188 | struct w83795_data *data = w83795_update_device(dev); |
| 1189 | long temp = temp_from_reg(data->dts[index] & 0x7f); |
| 1190 | |
| 1191 | temp += ((data->dts_read_vrlsb[index] >> VRLSB_SHIFT) & 0x03) * 250; |
| 1192 | if (data->dts[index] & 0x80) |
| 1193 | temp = -temp; |
| 1194 | return sprintf(buf, "%ld\n", temp); |
| 1195 | } |
| 1196 | |
| 1197 | static ssize_t |
| 1198 | show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf) |
| 1199 | { |
| 1200 | struct sensor_device_attribute_2 *sensor_attr = |
| 1201 | to_sensor_dev_attr_2(attr); |
| 1202 | int nr = sensor_attr->nr; |
| 1203 | struct i2c_client *client = to_i2c_client(dev); |
| 1204 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1205 | long temp = temp_from_reg(data->dts_ext[nr] & 0x7f); |
| 1206 | |
| 1207 | if (data->dts_ext[nr] & 0x80) |
| 1208 | temp = -temp; |
| 1209 | return sprintf(buf, "%ld\n", temp); |
| 1210 | } |
| 1211 | |
| 1212 | static ssize_t |
| 1213 | store_dts_ext(struct device *dev, struct device_attribute *attr, |
| 1214 | const char *buf, size_t count) |
| 1215 | { |
| 1216 | struct sensor_device_attribute_2 *sensor_attr = |
| 1217 | to_sensor_dev_attr_2(attr); |
| 1218 | int nr = sensor_attr->nr; |
| 1219 | struct i2c_client *client = to_i2c_client(dev); |
| 1220 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1221 | long tmp; |
| 1222 | |
| 1223 | if (strict_strtol(buf, 10, &tmp) < 0) |
| 1224 | return -EINVAL; |
| 1225 | |
| 1226 | mutex_lock(&data->update_lock); |
| 1227 | data->dts_ext[nr] = temp_to_reg(tmp, -128, 127); |
| 1228 | w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]); |
| 1229 | mutex_unlock(&data->update_lock); |
| 1230 | return count; |
| 1231 | } |
| 1232 | |
| 1233 | |
| 1234 | /* |
| 1235 | Type 3: Thermal diode |
| 1236 | Type 4: Thermistor |
| 1237 | |
| 1238 | Temp5-6, default TR |
| 1239 | Temp1-4, default TD |
| 1240 | */ |
| 1241 | |
| 1242 | static ssize_t |
| 1243 | show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf) |
| 1244 | { |
| 1245 | struct i2c_client *client = to_i2c_client(dev); |
| 1246 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1247 | struct sensor_device_attribute_2 *sensor_attr = |
| 1248 | to_sensor_dev_attr_2(attr); |
| 1249 | int index = sensor_attr->index; |
| 1250 | u8 tmp; |
| 1251 | |
| 1252 | if (data->has_temp >> index & 0x01) { |
| 1253 | if (data->temp_mode >> index & 0x01) |
| 1254 | tmp = 3; |
| 1255 | else |
| 1256 | tmp = 4; |
| 1257 | } else { |
| 1258 | tmp = 0; |
| 1259 | } |
| 1260 | |
| 1261 | return sprintf(buf, "%d\n", tmp); |
| 1262 | } |
| 1263 | |
| 1264 | static ssize_t |
| 1265 | store_temp_mode(struct device *dev, struct device_attribute *attr, |
| 1266 | const char *buf, size_t count) |
| 1267 | { |
| 1268 | struct i2c_client *client = to_i2c_client(dev); |
| 1269 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1270 | struct sensor_device_attribute_2 *sensor_attr = |
| 1271 | to_sensor_dev_attr_2(attr); |
| 1272 | int index = sensor_attr->index; |
| 1273 | unsigned long val; |
| 1274 | u8 tmp; |
| 1275 | u32 mask; |
| 1276 | |
| 1277 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1278 | return -EINVAL; |
| 1279 | if ((val != 4) && (val != 3)) |
| 1280 | return -EINVAL; |
| 1281 | if ((index > 3) && (val == 3)) |
| 1282 | return -EINVAL; |
| 1283 | |
| 1284 | mutex_lock(&data->update_lock); |
| 1285 | if (val == 3) { |
| 1286 | val = TEMP_CTRL_TD; |
| 1287 | data->has_temp |= 1 << index; |
| 1288 | data->temp_mode |= 1 << index; |
| 1289 | } else if (val == 4) { |
| 1290 | val = TEMP_CTRL_TR; |
| 1291 | data->has_temp |= 1 << index; |
| 1292 | tmp = 1 << index; |
| 1293 | data->temp_mode &= ~tmp; |
| 1294 | } |
| 1295 | |
| 1296 | if (index > 3) |
| 1297 | tmp = w83795_read(client, W83795_REG_TEMP_CTRL1); |
| 1298 | else |
| 1299 | tmp = w83795_read(client, W83795_REG_TEMP_CTRL2); |
| 1300 | |
| 1301 | mask = 0x03 << W83795_REG_TEMP_CTRL[index][TEMP_CTRL_SHIFT]; |
| 1302 | tmp &= ~mask; |
| 1303 | tmp |= W83795_REG_TEMP_CTRL[index][val]; |
| 1304 | |
| 1305 | mask = 1 << W83795_REG_TEMP_CTRL[index][TEMP_CTRL_HASIN_SHIFT]; |
| 1306 | data->has_in &= ~mask; |
| 1307 | |
| 1308 | if (index > 3) |
| 1309 | w83795_write(client, W83795_REG_TEMP_CTRL1, tmp); |
| 1310 | else |
| 1311 | w83795_write(client, W83795_REG_TEMP_CTRL2, tmp); |
| 1312 | |
| 1313 | mutex_unlock(&data->update_lock); |
| 1314 | return count; |
| 1315 | } |
| 1316 | |
| 1317 | |
| 1318 | /* show/store VIN */ |
| 1319 | static ssize_t |
| 1320 | show_in(struct device *dev, struct device_attribute *attr, char *buf) |
| 1321 | { |
| 1322 | struct sensor_device_attribute_2 *sensor_attr = |
| 1323 | to_sensor_dev_attr_2(attr); |
| 1324 | int nr = sensor_attr->nr; |
| 1325 | int index = sensor_attr->index; |
| 1326 | struct w83795_data *data = w83795_update_device(dev); |
| 1327 | u16 val = data->in[index][nr]; |
| 1328 | u8 lsb_idx; |
| 1329 | |
| 1330 | switch (nr) { |
| 1331 | case IN_READ: |
| 1332 | /* calculate this value again by sensors as sensors3.conf */ |
| 1333 | if ((index >= 17) && |
| 1334 | ((data->has_gain >> (index - 17)) & 1)) |
| 1335 | val *= 8; |
| 1336 | break; |
| 1337 | case IN_MAX: |
| 1338 | case IN_LOW: |
| 1339 | lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX]; |
| 1340 | val <<= 2; |
| 1341 | val |= (data->in_lsb[lsb_idx][nr] >> |
| 1342 | IN_LSB_SHIFT_IDX[lsb_idx][IN_LSB_SHIFT]) & 0x03; |
| 1343 | if ((index >= 17) && |
| 1344 | ((data->has_gain >> (index - 17)) & 1)) |
| 1345 | val *= 8; |
| 1346 | break; |
| 1347 | } |
| 1348 | val = in_from_reg(index, val); |
| 1349 | |
| 1350 | return sprintf(buf, "%d\n", val); |
| 1351 | } |
| 1352 | |
| 1353 | static ssize_t |
| 1354 | store_in(struct device *dev, struct device_attribute *attr, |
| 1355 | const char *buf, size_t count) |
| 1356 | { |
| 1357 | struct sensor_device_attribute_2 *sensor_attr = |
| 1358 | to_sensor_dev_attr_2(attr); |
| 1359 | int nr = sensor_attr->nr; |
| 1360 | int index = sensor_attr->index; |
| 1361 | struct i2c_client *client = to_i2c_client(dev); |
| 1362 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1363 | unsigned long val; |
| 1364 | u8 tmp; |
| 1365 | u8 lsb_idx; |
| 1366 | |
| 1367 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1368 | return -EINVAL; |
| 1369 | val = in_to_reg(index, val); |
| 1370 | |
| 1371 | if ((index >= 17) && |
| 1372 | ((data->has_gain >> (index - 17)) & 1)) |
| 1373 | val /= 8; |
| 1374 | val = SENSORS_LIMIT(val, 0, 0x3FF); |
| 1375 | mutex_lock(&data->update_lock); |
| 1376 | |
| 1377 | lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX]; |
| 1378 | tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr)); |
| 1379 | tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]); |
| 1380 | tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]; |
| 1381 | w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp); |
| 1382 | data->in_lsb[lsb_idx][nr] = tmp; |
| 1383 | |
| 1384 | tmp = (val >> 2) & 0xff; |
| 1385 | w83795_write(client, W83795_REG_IN[index][nr], tmp); |
| 1386 | data->in[index][nr] = tmp; |
| 1387 | |
| 1388 | mutex_unlock(&data->update_lock); |
| 1389 | return count; |
| 1390 | } |
| 1391 | |
| 1392 | |
| 1393 | static ssize_t |
| 1394 | show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf) |
| 1395 | { |
| 1396 | struct sensor_device_attribute_2 *sensor_attr = |
| 1397 | to_sensor_dev_attr_2(attr); |
| 1398 | int nr = sensor_attr->nr; |
| 1399 | struct i2c_client *client = to_i2c_client(dev); |
| 1400 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1401 | u16 val = data->setup_pwm[nr]; |
| 1402 | |
| 1403 | switch (nr) { |
| 1404 | case SETUP_PWM_UPTIME: |
| 1405 | case SETUP_PWM_DOWNTIME: |
| 1406 | val = time_from_reg(val); |
| 1407 | break; |
| 1408 | } |
| 1409 | |
| 1410 | return sprintf(buf, "%d\n", val); |
| 1411 | } |
| 1412 | |
| 1413 | static ssize_t |
| 1414 | store_sf_setup(struct device *dev, struct device_attribute *attr, |
| 1415 | const char *buf, size_t count) |
| 1416 | { |
| 1417 | struct sensor_device_attribute_2 *sensor_attr = |
| 1418 | to_sensor_dev_attr_2(attr); |
| 1419 | int nr = sensor_attr->nr; |
| 1420 | struct i2c_client *client = to_i2c_client(dev); |
| 1421 | struct w83795_data *data = i2c_get_clientdata(client); |
| 1422 | unsigned long val; |
| 1423 | |
| 1424 | if (strict_strtoul(buf, 10, &val) < 0) |
| 1425 | return -EINVAL; |
| 1426 | |
| 1427 | switch (nr) { |
| 1428 | case SETUP_PWM_DEFAULT: |
| 1429 | val = SENSORS_LIMIT(val, 0, 0xff); |
| 1430 | break; |
| 1431 | case SETUP_PWM_UPTIME: |
| 1432 | case SETUP_PWM_DOWNTIME: |
| 1433 | val = time_to_reg(val); |
| 1434 | if (val == 0) |
| 1435 | return -EINVAL; |
| 1436 | break; |
| 1437 | } |
| 1438 | |
| 1439 | mutex_lock(&data->update_lock); |
| 1440 | data->setup_pwm[nr] = val; |
| 1441 | w83795_write(client, W83795_REG_SETUP_PWM(nr), val); |
| 1442 | mutex_unlock(&data->update_lock); |
| 1443 | return count; |
| 1444 | } |
| 1445 | |
| 1446 | |
| 1447 | #define NOT_USED -1 |
| 1448 | |
| 1449 | #define SENSOR_ATTR_IN(index) \ |
| 1450 | SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \ |
| 1451 | IN_READ, index), \ |
| 1452 | SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \ |
| 1453 | store_in, IN_MAX, index), \ |
| 1454 | SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \ |
| 1455 | store_in, IN_LOW, index), \ |
| 1456 | SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \ |
| 1457 | NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \ |
| 1458 | SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \ |
| 1459 | show_alarm_beep, store_beep, BEEP_ENABLE, \ |
| 1460 | index + ((index > 14) ? 1 : 0)) |
| 1461 | |
| 1462 | #define SENSOR_ATTR_FAN(index) \ |
| 1463 | SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \ |
| 1464 | NULL, FAN_INPUT, index - 1), \ |
| 1465 | SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \ |
| 1466 | show_fan, store_fan_min, FAN_MIN, index - 1), \ |
| 1467 | SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \ |
| 1468 | NULL, ALARM_STATUS, index + 31), \ |
| 1469 | SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \ |
| 1470 | show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) |
| 1471 | |
| 1472 | #define SENSOR_ATTR_PWM(index) \ |
| 1473 | SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \ |
| 1474 | store_pwm, PWM_OUTPUT, index - 1), \ |
| 1475 | SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \ |
| 1476 | show_pwm, store_pwm, PWM_NONSTOP, index - 1), \ |
| 1477 | SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \ |
| 1478 | show_pwm, store_pwm, PWM_START, index - 1), \ |
| 1479 | SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \ |
| 1480 | show_pwm, store_pwm, PWM_STOP_TIME, index - 1), \ |
| 1481 | SENSOR_ATTR_2(fan##index##_div, S_IWUSR | S_IRUGO, \ |
| 1482 | show_pwm, store_pwm, PWM_DIV, index - 1), \ |
| 1483 | SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \ |
| 1484 | show_pwm_enable, store_pwm_enable, NOT_USED, index - 1) |
| 1485 | |
| 1486 | #define SENSOR_ATTR_FANIN_TARGET(index) \ |
| 1487 | SENSOR_ATTR_2(speed_cruise##index##_target, S_IWUSR | S_IRUGO, \ |
| 1488 | show_fanin, store_fanin, FANIN_TARGET, index - 1) |
| 1489 | |
| 1490 | #define SENSOR_ATTR_DTS(index) \ |
| 1491 | SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \ |
| 1492 | show_dts_mode, NULL, NOT_USED, index - 7), \ |
| 1493 | SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts, \ |
| 1494 | NULL, NOT_USED, index - 7), \ |
| 1495 | SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \ |
| 1496 | store_dts_ext, DTS_CRIT, NOT_USED), \ |
| 1497 | SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \ |
| 1498 | show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED), \ |
| 1499 | SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_dts_ext, \ |
| 1500 | store_dts_ext, DTS_WARN, NOT_USED), \ |
| 1501 | SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \ |
| 1502 | show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED), \ |
| 1503 | SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \ |
| 1504 | show_alarm_beep, NULL, ALARM_STATUS, index + 17), \ |
| 1505 | SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ |
| 1506 | show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) |
| 1507 | |
| 1508 | #define SENSOR_ATTR_TEMP(index) \ |
| 1509 | SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR, \ |
| 1510 | show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ |
| 1511 | SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \ |
| 1512 | NULL, TEMP_READ, index - 1), \ |
| 1513 | SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \ |
| 1514 | store_temp, TEMP_CRIT, index - 1), \ |
| 1515 | SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \ |
| 1516 | show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \ |
| 1517 | SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \ |
| 1518 | store_temp, TEMP_WARN, index - 1), \ |
| 1519 | SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \ |
| 1520 | show_temp, store_temp, TEMP_WARN_HYST, index - 1), \ |
| 1521 | SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \ |
| 1522 | show_alarm_beep, NULL, ALARM_STATUS, \ |
| 1523 | index + (index > 4 ? 11 : 17)), \ |
| 1524 | SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ |
| 1525 | show_alarm_beep, store_beep, BEEP_ENABLE, \ |
| 1526 | index + (index > 4 ? 11 : 17)), \ |
| 1527 | SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO, \ |
| 1528 | show_temp_src, store_temp_src, NOT_USED, index - 1), \ |
| 1529 | SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \ |
| 1530 | show_temp_pwm_enable, store_temp_pwm_enable, \ |
| 1531 | TEMP_PWM_ENABLE, index - 1), \ |
| 1532 | SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \ |
| 1533 | show_temp_pwm_enable, store_temp_pwm_enable, \ |
| 1534 | TEMP_PWM_FAN_MAP, index - 1), \ |
| 1535 | SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO, \ |
| 1536 | show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \ |
| 1537 | SENSOR_ATTR_2(temp##index##_crit, S_IWUSR | S_IRUGO, \ |
| 1538 | show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \ |
| 1539 | SENSOR_ATTR_2(temp##index##_crit_hyst, S_IWUSR | S_IRUGO, \ |
| 1540 | show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \ |
| 1541 | SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO, \ |
| 1542 | show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \ |
| 1543 | SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \ |
| 1544 | show_sf4_pwm, store_sf4_pwm, 0, index - 1), \ |
| 1545 | SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \ |
| 1546 | show_sf4_pwm, store_sf4_pwm, 1, index - 1), \ |
| 1547 | SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \ |
| 1548 | show_sf4_pwm, store_sf4_pwm, 2, index - 1), \ |
| 1549 | SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \ |
| 1550 | show_sf4_pwm, store_sf4_pwm, 3, index - 1), \ |
| 1551 | SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \ |
| 1552 | show_sf4_pwm, store_sf4_pwm, 4, index - 1), \ |
| 1553 | SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \ |
| 1554 | show_sf4_pwm, store_sf4_pwm, 5, index - 1), \ |
| 1555 | SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \ |
| 1556 | show_sf4_pwm, store_sf4_pwm, 6, index - 1), \ |
| 1557 | SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\ |
| 1558 | show_sf4_temp, store_sf4_temp, 0, index - 1), \ |
| 1559 | SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\ |
| 1560 | show_sf4_temp, store_sf4_temp, 1, index - 1), \ |
| 1561 | SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\ |
| 1562 | show_sf4_temp, store_sf4_temp, 2, index - 1), \ |
| 1563 | SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\ |
| 1564 | show_sf4_temp, store_sf4_temp, 3, index - 1), \ |
| 1565 | SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\ |
| 1566 | show_sf4_temp, store_sf4_temp, 4, index - 1), \ |
| 1567 | SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\ |
| 1568 | show_sf4_temp, store_sf4_temp, 5, index - 1), \ |
| 1569 | SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\ |
| 1570 | show_sf4_temp, store_sf4_temp, 6, index - 1) |
| 1571 | |
| 1572 | |
| 1573 | static struct sensor_device_attribute_2 w83795_in[] = { |
| 1574 | SENSOR_ATTR_IN(0), |
| 1575 | SENSOR_ATTR_IN(1), |
| 1576 | SENSOR_ATTR_IN(2), |
| 1577 | SENSOR_ATTR_IN(3), |
| 1578 | SENSOR_ATTR_IN(4), |
| 1579 | SENSOR_ATTR_IN(5), |
| 1580 | SENSOR_ATTR_IN(6), |
| 1581 | SENSOR_ATTR_IN(7), |
| 1582 | SENSOR_ATTR_IN(8), |
| 1583 | SENSOR_ATTR_IN(9), |
| 1584 | SENSOR_ATTR_IN(10), |
| 1585 | SENSOR_ATTR_IN(11), |
| 1586 | SENSOR_ATTR_IN(12), |
| 1587 | SENSOR_ATTR_IN(13), |
| 1588 | SENSOR_ATTR_IN(14), |
| 1589 | SENSOR_ATTR_IN(15), |
| 1590 | SENSOR_ATTR_IN(16), |
| 1591 | SENSOR_ATTR_IN(17), |
| 1592 | SENSOR_ATTR_IN(18), |
| 1593 | SENSOR_ATTR_IN(19), |
| 1594 | SENSOR_ATTR_IN(20), |
| 1595 | }; |
| 1596 | |
| 1597 | static struct sensor_device_attribute_2 w83795_fan[] = { |
| 1598 | SENSOR_ATTR_FAN(1), |
| 1599 | SENSOR_ATTR_FAN(2), |
| 1600 | SENSOR_ATTR_FAN(3), |
| 1601 | SENSOR_ATTR_FAN(4), |
| 1602 | SENSOR_ATTR_FAN(5), |
| 1603 | SENSOR_ATTR_FAN(6), |
| 1604 | SENSOR_ATTR_FAN(7), |
| 1605 | SENSOR_ATTR_FAN(8), |
| 1606 | SENSOR_ATTR_FAN(9), |
| 1607 | SENSOR_ATTR_FAN(10), |
| 1608 | SENSOR_ATTR_FAN(11), |
| 1609 | SENSOR_ATTR_FAN(12), |
| 1610 | SENSOR_ATTR_FAN(13), |
| 1611 | SENSOR_ATTR_FAN(14), |
| 1612 | }; |
| 1613 | |
| 1614 | static struct sensor_device_attribute_2 w83795_temp[] = { |
| 1615 | SENSOR_ATTR_TEMP(1), |
| 1616 | SENSOR_ATTR_TEMP(2), |
| 1617 | SENSOR_ATTR_TEMP(3), |
| 1618 | SENSOR_ATTR_TEMP(4), |
| 1619 | SENSOR_ATTR_TEMP(5), |
| 1620 | SENSOR_ATTR_TEMP(6), |
| 1621 | }; |
| 1622 | |
| 1623 | static struct sensor_device_attribute_2 w83795_dts[] = { |
| 1624 | SENSOR_ATTR_DTS(7), |
| 1625 | SENSOR_ATTR_DTS(8), |
| 1626 | SENSOR_ATTR_DTS(9), |
| 1627 | SENSOR_ATTR_DTS(10), |
| 1628 | SENSOR_ATTR_DTS(11), |
| 1629 | SENSOR_ATTR_DTS(12), |
| 1630 | SENSOR_ATTR_DTS(13), |
| 1631 | SENSOR_ATTR_DTS(14), |
| 1632 | }; |
| 1633 | |
| 1634 | static struct sensor_device_attribute_2 w83795_static[] = { |
| 1635 | SENSOR_ATTR_FANIN_TARGET(1), |
| 1636 | SENSOR_ATTR_FANIN_TARGET(2), |
| 1637 | SENSOR_ATTR_FANIN_TARGET(3), |
| 1638 | SENSOR_ATTR_FANIN_TARGET(4), |
| 1639 | SENSOR_ATTR_FANIN_TARGET(5), |
| 1640 | SENSOR_ATTR_FANIN_TARGET(6), |
| 1641 | SENSOR_ATTR_FANIN_TARGET(7), |
| 1642 | SENSOR_ATTR_FANIN_TARGET(8), |
| 1643 | SENSOR_ATTR_PWM(1), |
| 1644 | SENSOR_ATTR_PWM(2), |
| 1645 | }; |
| 1646 | |
| 1647 | /* all registers existed in 795g than 795adg, |
| 1648 | * like PWM3 - PWM8 */ |
| 1649 | static struct sensor_device_attribute_2 w83795_left_reg[] = { |
| 1650 | SENSOR_ATTR_PWM(3), |
| 1651 | SENSOR_ATTR_PWM(4), |
| 1652 | SENSOR_ATTR_PWM(5), |
| 1653 | SENSOR_ATTR_PWM(6), |
| 1654 | SENSOR_ATTR_PWM(7), |
| 1655 | SENSOR_ATTR_PWM(8), |
| 1656 | }; |
| 1657 | |
| 1658 | static struct sensor_device_attribute_2 sda_single_files[] = { |
| 1659 | SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep, |
| 1660 | store_chassis_clear, ALARM_STATUS, 46), |
| 1661 | SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable, |
| 1662 | store_beep_enable, NOT_USED, NOT_USED), |
| 1663 | SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin, |
| 1664 | store_fanin, FANIN_TOL, NOT_USED), |
| 1665 | SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup, |
| 1666 | store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED), |
| 1667 | SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup, |
| 1668 | store_sf_setup, SETUP_PWM_UPTIME, NOT_USED), |
| 1669 | SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup, |
| 1670 | store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED), |
| 1671 | }; |
| 1672 | |
| 1673 | /* |
| 1674 | * Driver interface |
| 1675 | */ |
| 1676 | |
| 1677 | static void w83795_init_client(struct i2c_client *client) |
| 1678 | { |
| 1679 | if (reset) |
| 1680 | w83795_write(client, W83795_REG_CONFIG, 0x80); |
| 1681 | |
| 1682 | /* Start monitoring */ |
| 1683 | w83795_write(client, W83795_REG_CONFIG, |
| 1684 | w83795_read(client, W83795_REG_CONFIG) | 0x01); |
| 1685 | } |
| 1686 | |
| 1687 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
| 1688 | static int w83795_detect(struct i2c_client *client, |
| 1689 | struct i2c_board_info *info) |
| 1690 | { |
| 1691 | u8 tmp, bank; |
| 1692 | struct i2c_adapter *adapter = client->adapter; |
| 1693 | unsigned short address = client->addr; |
| 1694 | |
| 1695 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 1696 | return -ENODEV; |
| 1697 | bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); |
| 1698 | |
| 1699 | tmp = bank & 0x80 ? 0x5c : 0xa3; |
| 1700 | /* Check Nuvoton vendor ID */ |
| 1701 | if (tmp != i2c_smbus_read_byte_data(client, |
| 1702 | W83795_REG_VENDORID)) { |
| 1703 | pr_debug("w83795: Detection failed at check " |
| 1704 | "vendor id\n"); |
| 1705 | return -ENODEV; |
| 1706 | } |
| 1707 | |
| 1708 | /* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR |
| 1709 | should match */ |
| 1710 | if ((bank & 0x07) == 0 |
| 1711 | && (i2c_smbus_read_byte_data(client, W83795_REG_I2C_ADDR) & 0x7f) != |
| 1712 | address) { |
| 1713 | pr_debug("w83795: Detection failed at check " |
| 1714 | "i2c addr\n"); |
| 1715 | return -ENODEV; |
| 1716 | } |
| 1717 | |
| 1718 | /* Determine the chip type now */ |
| 1719 | if (0x79 != i2c_smbus_read_byte_data(client, |
| 1720 | W83795_REG_CHIPID)) { |
| 1721 | pr_debug("w83795: Detection failed at check " |
| 1722 | "chip id\n"); |
| 1723 | return -ENODEV; |
| 1724 | } |
| 1725 | |
| 1726 | #if 0 |
| 1727 | /* Check 795 chip type: 795G or 795ADG */ |
| 1728 | if (W83795_REG_CONFIG_CONFIG48 & |
| 1729 | w83795_read(client, W83795_REG_CONFIG)) { |
| 1730 | data->chip_type = w83795adg; |
| 1731 | } else { |
| 1732 | data->chip_type = w83795g; |
| 1733 | } |
| 1734 | #endif |
| 1735 | |
| 1736 | /* Fill in the remaining client fields and put into the global list */ |
| 1737 | strlcpy(info->type, "w83795", I2C_NAME_SIZE); |
| 1738 | |
| 1739 | return 0; |
| 1740 | } |
| 1741 | |
| 1742 | static int w83795_probe(struct i2c_client *client, |
| 1743 | const struct i2c_device_id *id) |
| 1744 | { |
| 1745 | int i; |
| 1746 | u8 tmp; |
| 1747 | struct device *dev = &client->dev; |
| 1748 | struct w83795_data *data; |
| 1749 | int err = 0; |
| 1750 | |
| 1751 | data = kzalloc(sizeof(struct w83795_data), GFP_KERNEL); |
| 1752 | if (!data) { |
| 1753 | err = -ENOMEM; |
| 1754 | goto exit; |
| 1755 | } |
| 1756 | |
| 1757 | i2c_set_clientdata(client, data); |
| 1758 | data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); |
| 1759 | mutex_init(&data->update_lock); |
| 1760 | |
| 1761 | /* Initialize the chip */ |
| 1762 | w83795_init_client(client); |
| 1763 | |
| 1764 | /* Check 795 chip type: 795G or 795ADG */ |
| 1765 | if (W83795_REG_CONFIG_CONFIG48 & |
| 1766 | w83795_read(client, W83795_REG_CONFIG)) { |
| 1767 | data->chip_type = w83795adg; |
| 1768 | } else { |
| 1769 | data->chip_type = w83795g; |
| 1770 | } |
| 1771 | |
| 1772 | data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1); |
| 1773 | data->has_in |= w83795_read(client, W83795_REG_VOLT_CTRL2) << 8; |
| 1774 | /* VSEN11-9 not for 795adg */ |
| 1775 | if (data->chip_type == w83795adg) |
| 1776 | data->has_in &= 0xf8ff; |
| 1777 | data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1); |
| 1778 | data->has_fan |= w83795_read(client, W83795_REG_FANIN_CTRL2) << 8; |
| 1779 | |
| 1780 | /* VDSEN12-17 and TR1-6, TD1-4 use same register */ |
| 1781 | tmp = w83795_read(client, W83795_REG_TEMP_CTRL1); |
| 1782 | if (tmp & 0x20) |
| 1783 | data->enable_dts = 1; |
| 1784 | else |
| 1785 | data->enable_dts = 0; |
| 1786 | data->has_temp = 0; |
| 1787 | data->temp_mode = 0; |
| 1788 | if (tmp & 0x08) { |
| 1789 | if (tmp & 0x04) |
| 1790 | data->has_temp |= 0x20; |
| 1791 | else |
| 1792 | data->has_in |= 0x10000; |
| 1793 | } |
| 1794 | if (tmp & 0x02) { |
| 1795 | if (tmp & 0x01) |
| 1796 | data->has_temp |= 0x10; |
| 1797 | else |
| 1798 | data->has_in |= 0x8000; |
| 1799 | } |
| 1800 | tmp = w83795_read(client, W83795_REG_TEMP_CTRL2); |
| 1801 | if (tmp & 0x40) { |
| 1802 | data->has_temp |= 0x08; |
| 1803 | if (!(tmp & 0x80)) |
| 1804 | data->temp_mode |= 0x08; |
| 1805 | } else if (tmp & 0x80) { |
| 1806 | data->has_in |= 0x100000; |
| 1807 | } |
| 1808 | if (tmp & 0x10) { |
| 1809 | data->has_temp |= 0x04; |
| 1810 | if (!(tmp & 0x20)) |
| 1811 | data->temp_mode |= 0x04; |
| 1812 | } else if (tmp & 0x20) { |
| 1813 | data->has_in |= 0x80000; |
| 1814 | } |
| 1815 | if (tmp & 0x04) { |
| 1816 | data->has_temp |= 0x02; |
| 1817 | if (!(tmp & 0x08)) |
| 1818 | data->temp_mode |= 0x02; |
| 1819 | } else if (tmp & 0x08) { |
| 1820 | data->has_in |= 0x40000; |
| 1821 | } |
| 1822 | if (tmp & 0x01) { |
| 1823 | data->has_temp |= 0x01; |
| 1824 | if (!(tmp & 0x02)) |
| 1825 | data->temp_mode |= 0x01; |
| 1826 | } else if (tmp & 0x02) { |
| 1827 | data->has_in |= 0x20000; |
| 1828 | } |
| 1829 | |
| 1830 | /* Check DTS enable status */ |
| 1831 | if (data->enable_dts == 0) { |
| 1832 | data->has_dts = 0; |
| 1833 | } else { |
| 1834 | if (1 & w83795_read(client, W83795_REG_DTSC)) |
| 1835 | data->enable_dts |= 2; |
| 1836 | data->has_dts = w83795_read(client, W83795_REG_DTSE); |
| 1837 | } |
| 1838 | |
| 1839 | /* First update the voltages measured value and limits */ |
| 1840 | for (i = 0; i < ARRAY_SIZE(data->in); i++) { |
| 1841 | if (!(data->has_in & (1 << i))) |
| 1842 | continue; |
| 1843 | data->in[i][IN_MAX] = |
| 1844 | w83795_read(client, W83795_REG_IN[i][IN_MAX]); |
| 1845 | data->in[i][IN_LOW] = |
| 1846 | w83795_read(client, W83795_REG_IN[i][IN_LOW]); |
| 1847 | tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2; |
| 1848 | tmp |= (w83795_read(client, W83795_REG_VRLSB) |
| 1849 | >> VRLSB_SHIFT) & 0x03; |
| 1850 | data->in[i][IN_READ] = tmp; |
| 1851 | } |
| 1852 | for (i = 0; i < IN_LSB_REG_NUM; i++) { |
| 1853 | data->in_lsb[i][IN_MAX] = |
| 1854 | w83795_read(client, IN_LSB_REG(i, IN_MAX)); |
| 1855 | data->in_lsb[i][IN_LOW] = |
| 1856 | w83795_read(client, IN_LSB_REG(i, IN_LOW)); |
| 1857 | } |
| 1858 | data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f; |
| 1859 | |
| 1860 | /* First update fan and limits */ |
| 1861 | for (i = 0; i < ARRAY_SIZE(data->fan); i++) { |
| 1862 | if (!(data->has_fan & (1 << i))) |
| 1863 | continue; |
| 1864 | data->fan_min[i] = |
| 1865 | w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4; |
| 1866 | data->fan_min[i] |= |
| 1867 | (w83795_read(client, W83795_REG_FAN_MIN_LSB(i) >> |
| 1868 | W83795_REG_FAN_MIN_LSB_SHIFT(i))) & 0x0F; |
| 1869 | data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4; |
| 1870 | data->fan[i] |= |
| 1871 | (w83795_read(client, W83795_REG_VRLSB >> 4)) & 0x0F; |
| 1872 | } |
| 1873 | |
| 1874 | /* temperature and limits */ |
| 1875 | for (i = 0; i < ARRAY_SIZE(data->temp); i++) { |
| 1876 | if (!(data->has_temp & (1 << i))) |
| 1877 | continue; |
| 1878 | data->temp[i][TEMP_CRIT] = |
| 1879 | w83795_read(client, W83795_REG_TEMP[i][TEMP_CRIT]); |
| 1880 | data->temp[i][TEMP_CRIT_HYST] = |
| 1881 | w83795_read(client, W83795_REG_TEMP[i][TEMP_CRIT_HYST]); |
| 1882 | data->temp[i][TEMP_WARN] = |
| 1883 | w83795_read(client, W83795_REG_TEMP[i][TEMP_WARN]); |
| 1884 | data->temp[i][TEMP_WARN_HYST] = |
| 1885 | w83795_read(client, W83795_REG_TEMP[i][TEMP_WARN_HYST]); |
| 1886 | data->temp[i][TEMP_READ] = |
| 1887 | w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]); |
| 1888 | data->temp_read_vrlsb[i] = |
| 1889 | w83795_read(client, W83795_REG_VRLSB); |
| 1890 | } |
| 1891 | |
| 1892 | /* dts temperature and limits */ |
| 1893 | if (data->enable_dts != 0) { |
| 1894 | data->dts_ext[DTS_CRIT] = |
| 1895 | w83795_read(client, W83795_REG_DTS_EXT(DTS_CRIT)); |
| 1896 | data->dts_ext[DTS_CRIT_HYST] = |
| 1897 | w83795_read(client, W83795_REG_DTS_EXT(DTS_CRIT_HYST)); |
| 1898 | data->dts_ext[DTS_WARN] = |
| 1899 | w83795_read(client, W83795_REG_DTS_EXT(DTS_WARN)); |
| 1900 | data->dts_ext[DTS_WARN_HYST] = |
| 1901 | w83795_read(client, W83795_REG_DTS_EXT(DTS_WARN_HYST)); |
| 1902 | for (i = 0; i < ARRAY_SIZE(data->dts); i++) { |
| 1903 | if (!(data->has_dts & (1 << i))) |
| 1904 | continue; |
| 1905 | data->dts[i] = w83795_read(client, W83795_REG_DTS(i)); |
| 1906 | data->dts_read_vrlsb[i] = |
| 1907 | w83795_read(client, W83795_REG_VRLSB); |
| 1908 | } |
| 1909 | } |
| 1910 | |
| 1911 | /* First update temp source selction */ |
| 1912 | for (i = 0; i < 3; i++) |
| 1913 | data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i)); |
| 1914 | |
| 1915 | /* pwm and smart fan */ |
| 1916 | if (data->chip_type == w83795g) |
| 1917 | data->has_pwm = 8; |
| 1918 | else |
| 1919 | data->has_pwm = 2; |
| 1920 | data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1); |
| 1921 | data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2); |
| 1922 | /* w83795adg only support pwm2-0 */ |
| 1923 | for (i = 0; i < W83795_REG_TEMP_NUM; i++) |
| 1924 | data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i)); |
| 1925 | data->pwm_fomc = w83795_read(client, W83795_REG_FOMC); |
| 1926 | for (i = 0; i < data->has_pwm; i++) { |
| 1927 | for (tmp = 0; tmp < 5; tmp++) { |
| 1928 | data->pwm[i][tmp] = |
| 1929 | w83795_read(client, W83795_REG_PWM(i, tmp)); |
| 1930 | } |
| 1931 | } |
| 1932 | for (i = 0; i < 8; i++) { |
| 1933 | data->target_speed[i] = |
| 1934 | w83795_read(client, W83795_REG_FTSH(i)) << 4; |
| 1935 | data->target_speed[i] |= |
| 1936 | w83795_read(client, W83795_REG_FTSL(i)) >> 4; |
| 1937 | } |
| 1938 | data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f; |
| 1939 | |
| 1940 | for (i = 0; i < W83795_REG_TEMP_NUM; i++) { |
| 1941 | data->pwm_temp[i][TEMP_PWM_TTTI] = |
| 1942 | w83795_read(client, W83795_REG_TTTI(i)) & 0x7f; |
| 1943 | data->pwm_temp[i][TEMP_PWM_CTFS] = |
| 1944 | w83795_read(client, W83795_REG_CTFS(i)); |
| 1945 | tmp = w83795_read(client, W83795_REG_HT(i)); |
| 1946 | data->pwm_temp[i][TEMP_PWM_HCT] = (tmp >> 4) & 0x0f; |
| 1947 | data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f; |
| 1948 | } |
| 1949 | for (i = 0; i < W83795_REG_TEMP_NUM; i++) { |
| 1950 | for (tmp = 0; tmp < 7; tmp++) { |
| 1951 | data->sf4_reg[i][SF4_TEMP][tmp] = |
| 1952 | w83795_read(client, |
| 1953 | W83795_REG_SF4_TEMP(i, tmp)); |
| 1954 | data->sf4_reg[i][SF4_PWM][tmp] = |
| 1955 | w83795_read(client, W83795_REG_SF4_PWM(i, tmp)); |
| 1956 | } |
| 1957 | } |
| 1958 | |
| 1959 | /* Setup PWM Register */ |
| 1960 | for (i = 0; i < 3; i++) { |
| 1961 | data->setup_pwm[i] = |
| 1962 | w83795_read(client, W83795_REG_SETUP_PWM(i)); |
| 1963 | } |
| 1964 | |
| 1965 | /* alarm and beep */ |
| 1966 | for (i = 0; i < ALARM_BEEP_REG_NUM; i++) { |
| 1967 | data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i)); |
| 1968 | data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i)); |
| 1969 | } |
| 1970 | data->beep_enable = |
| 1971 | (w83795_read(client, W83795_REG_BEEP(5)) >> 7) & 0x01; |
| 1972 | |
| 1973 | /* Register sysfs hooks */ |
| 1974 | for (i = 0; i < ARRAY_SIZE(w83795_in); i++) { |
| 1975 | if (!(data->has_in & (1 << (i / 6)))) |
| 1976 | continue; |
| 1977 | err = device_create_file(dev, &w83795_in[i].dev_attr); |
| 1978 | if (err) |
| 1979 | goto exit_remove; |
| 1980 | } |
| 1981 | |
| 1982 | for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) { |
| 1983 | if (!(data->has_fan & (1 << (i / 5)))) |
| 1984 | continue; |
| 1985 | err = device_create_file(dev, &w83795_fan[i].dev_attr); |
| 1986 | if (err) |
| 1987 | goto exit_remove; |
| 1988 | } |
| 1989 | |
| 1990 | for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) { |
| 1991 | err = device_create_file(dev, &sda_single_files[i].dev_attr); |
| 1992 | if (err) |
| 1993 | goto exit_remove; |
| 1994 | } |
| 1995 | |
| 1996 | for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) { |
| 1997 | if (!(data->has_temp & (1 << (i / 29)))) |
| 1998 | continue; |
| 1999 | err = device_create_file(dev, &w83795_temp[i].dev_attr); |
| 2000 | if (err) |
| 2001 | goto exit_remove; |
| 2002 | } |
| 2003 | |
| 2004 | if (data->enable_dts != 0) { |
| 2005 | for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) { |
| 2006 | if (!(data->has_dts & (1 << (i / 8)))) |
| 2007 | continue; |
| 2008 | err = device_create_file(dev, &w83795_dts[i].dev_attr); |
| 2009 | if (err) |
| 2010 | goto exit_remove; |
| 2011 | } |
| 2012 | } |
| 2013 | |
| 2014 | if (data->chip_type == w83795g) { |
| 2015 | for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++) { |
| 2016 | err = device_create_file(dev, |
| 2017 | &w83795_left_reg[i].dev_attr); |
| 2018 | if (err) |
| 2019 | goto exit_remove; |
| 2020 | } |
| 2021 | } |
| 2022 | |
| 2023 | for (i = 0; i < ARRAY_SIZE(w83795_static); i++) { |
| 2024 | err = device_create_file(dev, &w83795_static[i].dev_attr); |
| 2025 | if (err) |
| 2026 | goto exit_remove; |
| 2027 | } |
| 2028 | |
| 2029 | data->hwmon_dev = hwmon_device_register(dev); |
| 2030 | if (IS_ERR(data->hwmon_dev)) { |
| 2031 | err = PTR_ERR(data->hwmon_dev); |
| 2032 | goto exit_remove; |
| 2033 | } |
| 2034 | |
| 2035 | return 0; |
| 2036 | |
| 2037 | /* Unregister sysfs hooks */ |
| 2038 | exit_remove: |
| 2039 | for (i = 0; i < ARRAY_SIZE(w83795_in); i++) |
| 2040 | device_remove_file(dev, &w83795_in[i].dev_attr); |
| 2041 | |
| 2042 | for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) |
| 2043 | device_remove_file(dev, &w83795_fan[i].dev_attr); |
| 2044 | |
| 2045 | for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) |
| 2046 | device_remove_file(dev, &sda_single_files[i].dev_attr); |
| 2047 | |
| 2048 | if (data->chip_type == w83795g) { |
| 2049 | for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++) |
| 2050 | device_remove_file(dev, &w83795_left_reg[i].dev_attr); |
| 2051 | } |
| 2052 | |
| 2053 | for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) |
| 2054 | device_remove_file(dev, &w83795_temp[i].dev_attr); |
| 2055 | |
| 2056 | for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) |
| 2057 | device_remove_file(dev, &w83795_dts[i].dev_attr); |
| 2058 | |
| 2059 | for (i = 0; i < ARRAY_SIZE(w83795_static); i++) |
| 2060 | device_remove_file(dev, &w83795_static[i].dev_attr); |
| 2061 | |
| 2062 | kfree(data); |
| 2063 | exit: |
| 2064 | return err; |
| 2065 | } |
| 2066 | |
| 2067 | static int w83795_remove(struct i2c_client *client) |
| 2068 | { |
| 2069 | struct w83795_data *data = i2c_get_clientdata(client); |
| 2070 | struct device *dev = &client->dev; |
| 2071 | int i; |
| 2072 | |
| 2073 | hwmon_device_unregister(data->hwmon_dev); |
| 2074 | |
| 2075 | for (i = 0; i < ARRAY_SIZE(w83795_in); i++) |
| 2076 | device_remove_file(dev, &w83795_in[i].dev_attr); |
| 2077 | |
| 2078 | for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) |
| 2079 | device_remove_file(dev, &w83795_fan[i].dev_attr); |
| 2080 | |
| 2081 | for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) |
| 2082 | device_remove_file(dev, &sda_single_files[i].dev_attr); |
| 2083 | |
| 2084 | if (data->chip_type == w83795g) { |
| 2085 | for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++) |
| 2086 | device_remove_file(dev, &w83795_left_reg[i].dev_attr); |
| 2087 | } |
| 2088 | |
| 2089 | for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) |
| 2090 | device_remove_file(dev, &w83795_temp[i].dev_attr); |
| 2091 | |
| 2092 | for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) |
| 2093 | device_remove_file(dev, &w83795_dts[i].dev_attr); |
| 2094 | |
| 2095 | for (i = 0; i < ARRAY_SIZE(w83795_static); i++) |
| 2096 | device_remove_file(dev, &w83795_static[i].dev_attr); |
| 2097 | |
| 2098 | kfree(data); |
| 2099 | |
| 2100 | return 0; |
| 2101 | } |
| 2102 | |
| 2103 | |
| 2104 | static const struct i2c_device_id w83795_id[] = { |
| 2105 | { "w83795", w83795 }, |
| 2106 | { } |
| 2107 | }; |
| 2108 | MODULE_DEVICE_TABLE(i2c, w83795_id); |
| 2109 | |
| 2110 | static struct i2c_driver w83795_driver = { |
| 2111 | .driver = { |
| 2112 | .name = "w83795", |
| 2113 | }, |
| 2114 | .probe = w83795_probe, |
| 2115 | .remove = w83795_remove, |
| 2116 | .id_table = w83795_id, |
| 2117 | |
| 2118 | .class = I2C_CLASS_HWMON, |
| 2119 | .detect = w83795_detect, |
| 2120 | .address_list = normal_i2c, |
| 2121 | }; |
| 2122 | |
| 2123 | static int __init sensors_w83795_init(void) |
| 2124 | { |
| 2125 | return i2c_add_driver(&w83795_driver); |
| 2126 | } |
| 2127 | |
| 2128 | static void __exit sensors_w83795_exit(void) |
| 2129 | { |
| 2130 | i2c_del_driver(&w83795_driver); |
| 2131 | } |
| 2132 | |
| 2133 | MODULE_AUTHOR("Wei Song"); |
| 2134 | MODULE_DESCRIPTION("w83795 driver"); |
| 2135 | MODULE_LICENSE("GPL"); |
| 2136 | |
| 2137 | module_init(sensors_w83795_init); |
| 2138 | module_exit(sensors_w83795_exit); |