Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 1 | /* |
| 2 | * drivers/leds/leds-as3645a.c - AS3645A and LM3555 flash controllers driver |
| 3 | * |
| 4 | * Copyright (C) 2008-2011 Nokia Corporation |
| 5 | * Copyright (c) 2011, 2017 Intel Corporation. |
| 6 | * |
| 7 | * Based on drivers/media/i2c/as3645a.c. |
| 8 | * |
| 9 | * Contact: Sakari Ailus <sakari.ailus@iki.fi> |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or |
| 12 | * modify it under the terms of the GNU General Public License |
| 13 | * version 2 as published by the Free Software Foundation. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, but |
| 16 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 18 | * General Public License for more details. |
| 19 | */ |
| 20 | |
| 21 | #include <linux/delay.h> |
| 22 | #include <linux/gpio/consumer.h> |
| 23 | #include <linux/i2c.h> |
| 24 | #include <linux/led-class-flash.h> |
| 25 | #include <linux/leds.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/mutex.h> |
| 28 | #include <linux/of.h> |
| 29 | #include <linux/slab.h> |
| 30 | |
| 31 | #include <media/v4l2-flash-led-class.h> |
| 32 | |
| 33 | #define AS_TIMER_US_TO_CODE(t) (((t) / 1000 - 100) / 50) |
| 34 | #define AS_TIMER_CODE_TO_US(c) ((50 * (c) + 100) * 1000) |
| 35 | |
| 36 | /* Register definitions */ |
| 37 | |
| 38 | /* Read-only Design info register: Reset state: xxxx 0001 */ |
| 39 | #define AS_DESIGN_INFO_REG 0x00 |
| 40 | #define AS_DESIGN_INFO_FACTORY(x) (((x) >> 4)) |
| 41 | #define AS_DESIGN_INFO_MODEL(x) ((x) & 0x0f) |
| 42 | |
| 43 | /* Read-only Version control register: Reset state: 0000 0000 |
| 44 | * for first engineering samples |
| 45 | */ |
| 46 | #define AS_VERSION_CONTROL_REG 0x01 |
| 47 | #define AS_VERSION_CONTROL_RFU(x) (((x) >> 4)) |
| 48 | #define AS_VERSION_CONTROL_VERSION(x) ((x) & 0x0f) |
| 49 | |
| 50 | /* Read / Write (Indicator and timer register): Reset state: 0000 1111 */ |
| 51 | #define AS_INDICATOR_AND_TIMER_REG 0x02 |
| 52 | #define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT 0 |
| 53 | #define AS_INDICATOR_AND_TIMER_VREF_SHIFT 4 |
| 54 | #define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT 6 |
| 55 | |
| 56 | /* Read / Write (Current set register): Reset state: 0110 1001 */ |
| 57 | #define AS_CURRENT_SET_REG 0x03 |
| 58 | #define AS_CURRENT_ASSIST_LIGHT_SHIFT 0 |
| 59 | #define AS_CURRENT_LED_DET_ON (1 << 3) |
| 60 | #define AS_CURRENT_FLASH_CURRENT_SHIFT 4 |
| 61 | |
| 62 | /* Read / Write (Control register): Reset state: 1011 0100 */ |
| 63 | #define AS_CONTROL_REG 0x04 |
| 64 | #define AS_CONTROL_MODE_SETTING_SHIFT 0 |
| 65 | #define AS_CONTROL_STROBE_ON (1 << 2) |
| 66 | #define AS_CONTROL_OUT_ON (1 << 3) |
| 67 | #define AS_CONTROL_EXT_TORCH_ON (1 << 4) |
| 68 | #define AS_CONTROL_STROBE_TYPE_EDGE (0 << 5) |
| 69 | #define AS_CONTROL_STROBE_TYPE_LEVEL (1 << 5) |
| 70 | #define AS_CONTROL_COIL_PEAK_SHIFT 6 |
| 71 | |
| 72 | /* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ |
| 73 | #define AS_FAULT_INFO_REG 0x05 |
| 74 | #define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT (1 << 1) |
| 75 | #define AS_FAULT_INFO_INDICATOR_LED (1 << 2) |
| 76 | #define AS_FAULT_INFO_LED_AMOUNT (1 << 3) |
| 77 | #define AS_FAULT_INFO_TIMEOUT (1 << 4) |
| 78 | #define AS_FAULT_INFO_OVER_TEMPERATURE (1 << 5) |
| 79 | #define AS_FAULT_INFO_SHORT_CIRCUIT (1 << 6) |
| 80 | #define AS_FAULT_INFO_OVER_VOLTAGE (1 << 7) |
| 81 | |
| 82 | /* Boost register */ |
| 83 | #define AS_BOOST_REG 0x0d |
| 84 | #define AS_BOOST_CURRENT_DISABLE (0 << 0) |
| 85 | #define AS_BOOST_CURRENT_ENABLE (1 << 0) |
| 86 | |
| 87 | /* Password register is used to unlock boost register writing */ |
| 88 | #define AS_PASSWORD_REG 0x0f |
| 89 | #define AS_PASSWORD_UNLOCK_VALUE 0x55 |
| 90 | |
| 91 | #define AS_NAME "as3645a" |
| 92 | #define AS_I2C_ADDR (0x60 >> 1) /* W:0x60, R:0x61 */ |
| 93 | |
| 94 | #define AS_FLASH_TIMEOUT_MIN 100000 /* us */ |
| 95 | #define AS_FLASH_TIMEOUT_MAX 850000 |
| 96 | #define AS_FLASH_TIMEOUT_STEP 50000 |
| 97 | |
| 98 | #define AS_FLASH_INTENSITY_MIN 200000 /* uA */ |
| 99 | #define AS_FLASH_INTENSITY_MAX_1LED 500000 |
| 100 | #define AS_FLASH_INTENSITY_MAX_2LEDS 400000 |
| 101 | #define AS_FLASH_INTENSITY_STEP 20000 |
| 102 | |
| 103 | #define AS_TORCH_INTENSITY_MIN 20000 /* uA */ |
| 104 | #define AS_TORCH_INTENSITY_MAX 160000 |
| 105 | #define AS_TORCH_INTENSITY_STEP 20000 |
| 106 | |
| 107 | #define AS_INDICATOR_INTENSITY_MIN 0 /* uA */ |
| 108 | #define AS_INDICATOR_INTENSITY_MAX 10000 |
| 109 | #define AS_INDICATOR_INTENSITY_STEP 2500 |
| 110 | |
| 111 | #define AS_PEAK_mA_MAX 2000 |
| 112 | #define AS_PEAK_mA_TO_REG(a) \ |
| 113 | ((min_t(u32, AS_PEAK_mA_MAX, a) - 1250) / 250) |
| 114 | |
Sakari Ailus | e626c32 | 2017-09-22 12:32:37 +0300 | [diff] [blame] | 115 | /* LED numbers for Devicetree */ |
| 116 | #define AS_LED_FLASH 0 |
| 117 | #define AS_LED_INDICATOR 1 |
| 118 | |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 119 | enum as_mode { |
| 120 | AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, |
| 121 | AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, |
| 122 | AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, |
| 123 | AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, |
| 124 | }; |
| 125 | |
| 126 | struct as3645a_config { |
| 127 | u32 flash_timeout_us; |
| 128 | u32 flash_max_ua; |
| 129 | u32 assist_max_ua; |
| 130 | u32 indicator_max_ua; |
| 131 | u32 voltage_reference; |
| 132 | u32 peak; |
| 133 | }; |
| 134 | |
| 135 | struct as3645a_names { |
| 136 | char flash[32]; |
| 137 | char indicator[32]; |
| 138 | }; |
| 139 | |
| 140 | struct as3645a { |
| 141 | struct i2c_client *client; |
| 142 | |
| 143 | struct mutex mutex; |
| 144 | |
| 145 | struct led_classdev_flash fled; |
| 146 | struct led_classdev iled_cdev; |
| 147 | |
| 148 | struct v4l2_flash *vf; |
| 149 | struct v4l2_flash *vfind; |
| 150 | |
| 151 | struct device_node *flash_node; |
| 152 | struct device_node *indicator_node; |
| 153 | |
| 154 | struct as3645a_config cfg; |
| 155 | |
| 156 | enum as_mode mode; |
| 157 | unsigned int timeout; |
| 158 | unsigned int flash_current; |
| 159 | unsigned int assist_current; |
| 160 | unsigned int indicator_current; |
| 161 | enum v4l2_flash_strobe_source strobe_source; |
| 162 | }; |
| 163 | |
| 164 | #define fled_to_as3645a(__fled) container_of(__fled, struct as3645a, fled) |
| 165 | #define iled_cdev_to_as3645a(__iled_cdev) \ |
| 166 | container_of(__iled_cdev, struct as3645a, iled_cdev) |
| 167 | |
| 168 | /* Return negative errno else zero on success */ |
| 169 | static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) |
| 170 | { |
| 171 | struct i2c_client *client = flash->client; |
| 172 | int rval; |
| 173 | |
| 174 | rval = i2c_smbus_write_byte_data(client, addr, val); |
| 175 | |
| 176 | dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, |
| 177 | rval < 0 ? "fail" : "ok"); |
| 178 | |
| 179 | return rval; |
| 180 | } |
| 181 | |
| 182 | /* Return negative errno else a data byte received from the device. */ |
| 183 | static int as3645a_read(struct as3645a *flash, u8 addr) |
| 184 | { |
| 185 | struct i2c_client *client = flash->client; |
| 186 | int rval; |
| 187 | |
| 188 | rval = i2c_smbus_read_byte_data(client, addr); |
| 189 | |
| 190 | dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, |
| 191 | rval < 0 ? "fail" : "ok"); |
| 192 | |
| 193 | return rval; |
| 194 | } |
| 195 | |
| 196 | /* ----------------------------------------------------------------------------- |
| 197 | * Hardware configuration and trigger |
| 198 | */ |
| 199 | |
| 200 | /** |
| 201 | * as3645a_set_config - Set flash configuration registers |
| 202 | * @flash: The flash |
| 203 | * |
| 204 | * Configure the hardware with flash, assist and indicator currents, as well as |
| 205 | * flash timeout. |
| 206 | * |
| 207 | * Return 0 on success, or a negative error code if an I2C communication error |
| 208 | * occurred. |
| 209 | */ |
| 210 | static int as3645a_set_current(struct as3645a *flash) |
| 211 | { |
| 212 | u8 val; |
| 213 | |
| 214 | val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) |
| 215 | | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) |
| 216 | | AS_CURRENT_LED_DET_ON; |
| 217 | |
| 218 | return as3645a_write(flash, AS_CURRENT_SET_REG, val); |
| 219 | } |
| 220 | |
| 221 | static int as3645a_set_timeout(struct as3645a *flash) |
| 222 | { |
| 223 | u8 val; |
| 224 | |
| 225 | val = flash->timeout << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; |
| 226 | |
| 227 | val |= (flash->cfg.voltage_reference |
| 228 | << AS_INDICATOR_AND_TIMER_VREF_SHIFT) |
| 229 | | ((flash->indicator_current ? flash->indicator_current - 1 : 0) |
| 230 | << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); |
| 231 | |
| 232 | return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); |
| 233 | } |
| 234 | |
| 235 | /** |
| 236 | * as3645a_set_control - Set flash control register |
| 237 | * @flash: The flash |
| 238 | * @mode: Desired output mode |
| 239 | * @on: Desired output state |
| 240 | * |
| 241 | * Configure the hardware with output mode and state. |
| 242 | * |
| 243 | * Return 0 on success, or a negative error code if an I2C communication error |
| 244 | * occurred. |
| 245 | */ |
| 246 | static int |
| 247 | as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) |
| 248 | { |
| 249 | u8 reg; |
| 250 | |
| 251 | /* Configure output parameters and operation mode. */ |
| 252 | reg = (flash->cfg.peak << AS_CONTROL_COIL_PEAK_SHIFT) |
| 253 | | (on ? AS_CONTROL_OUT_ON : 0) |
| 254 | | mode; |
| 255 | |
| 256 | if (mode == AS_MODE_FLASH && |
| 257 | flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) |
| 258 | reg |= AS_CONTROL_STROBE_TYPE_LEVEL |
| 259 | | AS_CONTROL_STROBE_ON; |
| 260 | |
| 261 | return as3645a_write(flash, AS_CONTROL_REG, reg); |
| 262 | } |
| 263 | |
| 264 | static int as3645a_get_fault(struct led_classdev_flash *fled, u32 *fault) |
| 265 | { |
| 266 | struct as3645a *flash = fled_to_as3645a(fled); |
| 267 | int rval; |
| 268 | |
| 269 | /* NOTE: reading register clears fault status */ |
| 270 | rval = as3645a_read(flash, AS_FAULT_INFO_REG); |
| 271 | if (rval < 0) |
| 272 | return rval; |
| 273 | |
| 274 | if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) |
| 275 | *fault |= LED_FAULT_OVER_CURRENT; |
| 276 | |
| 277 | if (rval & AS_FAULT_INFO_INDICATOR_LED) |
| 278 | *fault |= LED_FAULT_INDICATOR; |
| 279 | |
| 280 | dev_dbg(&flash->client->dev, "%u connected LEDs\n", |
| 281 | rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); |
| 282 | |
| 283 | if (rval & AS_FAULT_INFO_TIMEOUT) |
| 284 | *fault |= LED_FAULT_TIMEOUT; |
| 285 | |
| 286 | if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) |
| 287 | *fault |= LED_FAULT_OVER_TEMPERATURE; |
| 288 | |
| 289 | if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) |
| 290 | *fault |= LED_FAULT_OVER_CURRENT; |
| 291 | |
| 292 | if (rval & AS_FAULT_INFO_OVER_VOLTAGE) |
| 293 | *fault |= LED_FAULT_INPUT_VOLTAGE; |
| 294 | |
| 295 | return rval; |
| 296 | } |
| 297 | |
| 298 | static unsigned int __as3645a_current_to_reg(unsigned int min, unsigned int max, |
| 299 | unsigned int step, |
| 300 | unsigned int val) |
| 301 | { |
| 302 | if (val < min) |
| 303 | val = min; |
| 304 | |
| 305 | if (val > max) |
| 306 | val = max; |
| 307 | |
| 308 | return (val - min) / step; |
| 309 | } |
| 310 | |
| 311 | static unsigned int as3645a_current_to_reg(struct as3645a *flash, bool is_flash, |
| 312 | unsigned int ua) |
| 313 | { |
| 314 | if (is_flash) |
| 315 | return __as3645a_current_to_reg(AS_TORCH_INTENSITY_MIN, |
| 316 | flash->cfg.assist_max_ua, |
| 317 | AS_TORCH_INTENSITY_STEP, ua); |
| 318 | else |
| 319 | return __as3645a_current_to_reg(AS_FLASH_INTENSITY_MIN, |
| 320 | flash->cfg.flash_max_ua, |
| 321 | AS_FLASH_INTENSITY_STEP, ua); |
| 322 | } |
| 323 | |
| 324 | static int as3645a_set_indicator_brightness(struct led_classdev *iled_cdev, |
| 325 | enum led_brightness brightness) |
| 326 | { |
| 327 | struct as3645a *flash = iled_cdev_to_as3645a(iled_cdev); |
| 328 | int rval; |
| 329 | |
| 330 | flash->indicator_current = brightness; |
| 331 | |
| 332 | rval = as3645a_set_timeout(flash); |
| 333 | if (rval) |
| 334 | return rval; |
| 335 | |
| 336 | return as3645a_set_control(flash, AS_MODE_INDICATOR, brightness); |
| 337 | } |
| 338 | |
| 339 | static int as3645a_set_assist_brightness(struct led_classdev *fled_cdev, |
| 340 | enum led_brightness brightness) |
| 341 | { |
| 342 | struct led_classdev_flash *fled = lcdev_to_flcdev(fled_cdev); |
| 343 | struct as3645a *flash = fled_to_as3645a(fled); |
| 344 | int rval; |
| 345 | |
| 346 | if (brightness) { |
| 347 | /* Register value 0 is 20 mA. */ |
| 348 | flash->assist_current = brightness - 1; |
| 349 | |
| 350 | rval = as3645a_set_current(flash); |
| 351 | if (rval) |
| 352 | return rval; |
| 353 | } |
| 354 | |
| 355 | return as3645a_set_control(flash, AS_MODE_ASSIST, brightness); |
| 356 | } |
| 357 | |
| 358 | static int as3645a_set_flash_brightness(struct led_classdev_flash *fled, |
| 359 | u32 brightness_ua) |
| 360 | { |
| 361 | struct as3645a *flash = fled_to_as3645a(fled); |
| 362 | |
Dan Murphy | 6b68441 | 2017-12-14 11:37:27 -0600 | [diff] [blame] | 363 | flash->flash_current = as3645a_current_to_reg(flash, true, |
| 364 | brightness_ua); |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 365 | |
| 366 | return as3645a_set_current(flash); |
| 367 | } |
| 368 | |
| 369 | static int as3645a_set_flash_timeout(struct led_classdev_flash *fled, |
| 370 | u32 timeout_us) |
| 371 | { |
| 372 | struct as3645a *flash = fled_to_as3645a(fled); |
| 373 | |
| 374 | flash->timeout = AS_TIMER_US_TO_CODE(timeout_us); |
| 375 | |
| 376 | return as3645a_set_timeout(flash); |
| 377 | } |
| 378 | |
| 379 | static int as3645a_set_strobe(struct led_classdev_flash *fled, bool state) |
| 380 | { |
| 381 | struct as3645a *flash = fled_to_as3645a(fled); |
| 382 | |
| 383 | return as3645a_set_control(flash, AS_MODE_FLASH, state); |
| 384 | } |
| 385 | |
| 386 | static const struct led_flash_ops as3645a_led_flash_ops = { |
| 387 | .flash_brightness_set = as3645a_set_flash_brightness, |
| 388 | .timeout_set = as3645a_set_flash_timeout, |
| 389 | .strobe_set = as3645a_set_strobe, |
| 390 | .fault_get = as3645a_get_fault, |
| 391 | }; |
| 392 | |
| 393 | static int as3645a_setup(struct as3645a *flash) |
| 394 | { |
| 395 | struct device *dev = &flash->client->dev; |
| 396 | u32 fault = 0; |
| 397 | int rval; |
| 398 | |
| 399 | /* clear errors */ |
| 400 | rval = as3645a_read(flash, AS_FAULT_INFO_REG); |
| 401 | if (rval < 0) |
| 402 | return rval; |
| 403 | |
| 404 | dev_dbg(dev, "Fault info: %02x\n", rval); |
| 405 | |
| 406 | rval = as3645a_set_current(flash); |
| 407 | if (rval < 0) |
| 408 | return rval; |
| 409 | |
| 410 | rval = as3645a_set_timeout(flash); |
| 411 | if (rval < 0) |
| 412 | return rval; |
| 413 | |
| 414 | rval = as3645a_set_control(flash, AS_MODE_INDICATOR, false); |
| 415 | if (rval < 0) |
| 416 | return rval; |
| 417 | |
| 418 | /* read status */ |
| 419 | rval = as3645a_get_fault(&flash->fled, &fault); |
| 420 | if (rval < 0) |
| 421 | return rval; |
| 422 | |
| 423 | dev_dbg(dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", |
| 424 | as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); |
| 425 | dev_dbg(dev, "AS_CURRENT_SET_REG: %02x\n", |
| 426 | as3645a_read(flash, AS_CURRENT_SET_REG)); |
| 427 | dev_dbg(dev, "AS_CONTROL_REG: %02x\n", |
| 428 | as3645a_read(flash, AS_CONTROL_REG)); |
| 429 | |
| 430 | return rval & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; |
| 431 | } |
| 432 | |
| 433 | static int as3645a_detect(struct as3645a *flash) |
| 434 | { |
| 435 | struct device *dev = &flash->client->dev; |
| 436 | int rval, man, model, rfu, version; |
| 437 | const char *vendor; |
| 438 | |
| 439 | rval = as3645a_read(flash, AS_DESIGN_INFO_REG); |
| 440 | if (rval < 0) { |
| 441 | dev_err(dev, "can't read design info reg\n"); |
| 442 | return rval; |
| 443 | } |
| 444 | |
| 445 | man = AS_DESIGN_INFO_FACTORY(rval); |
| 446 | model = AS_DESIGN_INFO_MODEL(rval); |
| 447 | |
| 448 | rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); |
| 449 | if (rval < 0) { |
| 450 | dev_err(dev, "can't read version control reg\n"); |
| 451 | return rval; |
| 452 | } |
| 453 | |
| 454 | rfu = AS_VERSION_CONTROL_RFU(rval); |
| 455 | version = AS_VERSION_CONTROL_VERSION(rval); |
| 456 | |
| 457 | /* Verify the chip model and version. */ |
| 458 | if (model != 0x01 || rfu != 0x00) { |
Dan Murphy | faa91a7 | 2017-12-14 11:37:26 -0600 | [diff] [blame] | 459 | dev_err(dev, "AS3645A not detected (model %d rfu %d)\n", |
| 460 | model, rfu); |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 461 | return -ENODEV; |
| 462 | } |
| 463 | |
| 464 | switch (man) { |
| 465 | case 1: |
| 466 | vendor = "AMS, Austria Micro Systems"; |
| 467 | break; |
| 468 | case 2: |
| 469 | vendor = "ADI, Analog Devices Inc."; |
| 470 | break; |
| 471 | case 3: |
| 472 | vendor = "NSC, National Semiconductor"; |
| 473 | break; |
| 474 | case 4: |
| 475 | vendor = "NXP"; |
| 476 | break; |
| 477 | case 5: |
| 478 | vendor = "TI, Texas Instrument"; |
| 479 | break; |
| 480 | default: |
| 481 | vendor = "Unknown"; |
| 482 | } |
| 483 | |
| 484 | dev_info(dev, "Chip vendor: %s (%d) Version: %d\n", vendor, |
| 485 | man, version); |
| 486 | |
| 487 | rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); |
| 488 | if (rval < 0) |
| 489 | return rval; |
| 490 | |
| 491 | return as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); |
| 492 | } |
| 493 | |
| 494 | static int as3645a_parse_node(struct as3645a *flash, |
| 495 | struct as3645a_names *names, |
| 496 | struct device_node *node) |
| 497 | { |
| 498 | struct as3645a_config *cfg = &flash->cfg; |
Sakari Ailus | e626c32 | 2017-09-22 12:32:37 +0300 | [diff] [blame] | 499 | struct device_node *child; |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 500 | const char *name; |
| 501 | int rval; |
| 502 | |
Sakari Ailus | e626c32 | 2017-09-22 12:32:37 +0300 | [diff] [blame] | 503 | for_each_child_of_node(node, child) { |
| 504 | u32 id = 0; |
| 505 | |
| 506 | of_property_read_u32(child, "reg", &id); |
| 507 | |
| 508 | switch (id) { |
| 509 | case AS_LED_FLASH: |
| 510 | flash->flash_node = of_node_get(child); |
| 511 | break; |
| 512 | case AS_LED_INDICATOR: |
| 513 | flash->indicator_node = of_node_get(child); |
| 514 | break; |
| 515 | default: |
| 516 | dev_warn(&flash->client->dev, |
| 517 | "unknown LED %u encountered, ignoring\n", id); |
| 518 | break; |
| 519 | } |
| 520 | } |
| 521 | |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 522 | if (!flash->flash_node) { |
| 523 | dev_err(&flash->client->dev, "can't find flash node\n"); |
| 524 | return -ENODEV; |
| 525 | } |
| 526 | |
| 527 | rval = of_property_read_string(flash->flash_node, "label", &name); |
| 528 | if (!rval) |
| 529 | strlcpy(names->flash, name, sizeof(names->flash)); |
| 530 | else |
| 531 | snprintf(names->flash, sizeof(names->flash), |
Rob Herring | f813eec | 2018-08-27 20:52:26 -0500 | [diff] [blame] | 532 | "%pOFn:flash", node); |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 533 | |
| 534 | rval = of_property_read_u32(flash->flash_node, "flash-timeout-us", |
| 535 | &cfg->flash_timeout_us); |
| 536 | if (rval < 0) { |
| 537 | dev_err(&flash->client->dev, |
| 538 | "can't read flash-timeout-us property for flash\n"); |
| 539 | goto out_err; |
| 540 | } |
| 541 | |
| 542 | rval = of_property_read_u32(flash->flash_node, "flash-max-microamp", |
| 543 | &cfg->flash_max_ua); |
| 544 | if (rval < 0) { |
| 545 | dev_err(&flash->client->dev, |
| 546 | "can't read flash-max-microamp property for flash\n"); |
| 547 | goto out_err; |
| 548 | } |
| 549 | |
| 550 | rval = of_property_read_u32(flash->flash_node, "led-max-microamp", |
| 551 | &cfg->assist_max_ua); |
| 552 | if (rval < 0) { |
| 553 | dev_err(&flash->client->dev, |
| 554 | "can't read led-max-microamp property for flash\n"); |
| 555 | goto out_err; |
| 556 | } |
| 557 | |
| 558 | of_property_read_u32(flash->flash_node, "voltage-reference", |
| 559 | &cfg->voltage_reference); |
| 560 | |
Sakari Ailus | af2e658f | 2017-09-22 12:32:35 +0300 | [diff] [blame] | 561 | of_property_read_u32(flash->flash_node, "ams,input-max-microamp", |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 562 | &cfg->peak); |
| 563 | cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak); |
| 564 | |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 565 | if (!flash->indicator_node) { |
| 566 | dev_warn(&flash->client->dev, |
| 567 | "can't find indicator node\n"); |
| 568 | goto out_err; |
| 569 | } |
| 570 | |
| 571 | rval = of_property_read_string(flash->indicator_node, "label", &name); |
| 572 | if (!rval) |
| 573 | strlcpy(names->indicator, name, sizeof(names->indicator)); |
| 574 | else |
| 575 | snprintf(names->indicator, sizeof(names->indicator), |
Rob Herring | f813eec | 2018-08-27 20:52:26 -0500 | [diff] [blame] | 576 | "%pOFn:indicator", node); |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 577 | |
| 578 | rval = of_property_read_u32(flash->indicator_node, "led-max-microamp", |
| 579 | &cfg->indicator_max_ua); |
| 580 | if (rval < 0) { |
| 581 | dev_err(&flash->client->dev, |
| 582 | "can't read led-max-microamp property for indicator\n"); |
| 583 | goto out_err; |
| 584 | } |
| 585 | |
| 586 | return 0; |
| 587 | |
| 588 | out_err: |
| 589 | of_node_put(flash->flash_node); |
| 590 | of_node_put(flash->indicator_node); |
| 591 | |
| 592 | return rval; |
| 593 | } |
| 594 | |
| 595 | static int as3645a_led_class_setup(struct as3645a *flash, |
| 596 | struct as3645a_names *names) |
| 597 | { |
| 598 | struct led_classdev *fled_cdev = &flash->fled.led_cdev; |
| 599 | struct led_classdev *iled_cdev = &flash->iled_cdev; |
| 600 | struct led_flash_setting *cfg; |
| 601 | int rval; |
| 602 | |
| 603 | iled_cdev->name = names->indicator; |
| 604 | iled_cdev->brightness_set_blocking = as3645a_set_indicator_brightness; |
| 605 | iled_cdev->max_brightness = |
| 606 | flash->cfg.indicator_max_ua / AS_INDICATOR_INTENSITY_STEP; |
| 607 | iled_cdev->flags = LED_CORE_SUSPENDRESUME; |
| 608 | |
| 609 | rval = led_classdev_register(&flash->client->dev, iled_cdev); |
| 610 | if (rval < 0) |
| 611 | return rval; |
| 612 | |
| 613 | cfg = &flash->fled.brightness; |
| 614 | cfg->min = AS_FLASH_INTENSITY_MIN; |
| 615 | cfg->max = flash->cfg.flash_max_ua; |
| 616 | cfg->step = AS_FLASH_INTENSITY_STEP; |
| 617 | cfg->val = flash->cfg.flash_max_ua; |
| 618 | |
| 619 | cfg = &flash->fled.timeout; |
| 620 | cfg->min = AS_FLASH_TIMEOUT_MIN; |
| 621 | cfg->max = flash->cfg.flash_timeout_us; |
| 622 | cfg->step = AS_FLASH_TIMEOUT_STEP; |
| 623 | cfg->val = flash->cfg.flash_timeout_us; |
| 624 | |
| 625 | flash->fled.ops = &as3645a_led_flash_ops; |
| 626 | |
| 627 | fled_cdev->name = names->flash; |
| 628 | fled_cdev->brightness_set_blocking = as3645a_set_assist_brightness; |
| 629 | /* Value 0 is off in LED class. */ |
| 630 | fled_cdev->max_brightness = |
| 631 | as3645a_current_to_reg(flash, false, |
| 632 | flash->cfg.assist_max_ua) + 1; |
| 633 | fled_cdev->flags = LED_DEV_CAP_FLASH | LED_CORE_SUSPENDRESUME; |
| 634 | |
| 635 | rval = led_classdev_flash_register(&flash->client->dev, &flash->fled); |
| 636 | if (rval) { |
| 637 | led_classdev_unregister(iled_cdev); |
| 638 | dev_err(&flash->client->dev, |
| 639 | "led_classdev_flash_register() failed, error %d\n", |
| 640 | rval); |
| 641 | } |
| 642 | |
| 643 | return rval; |
| 644 | } |
| 645 | |
| 646 | static int as3645a_v4l2_setup(struct as3645a *flash) |
| 647 | { |
| 648 | struct led_classdev_flash *fled = &flash->fled; |
| 649 | struct led_classdev *led = &fled->led_cdev; |
| 650 | struct v4l2_flash_config cfg = { |
| 651 | .intensity = { |
| 652 | .min = AS_TORCH_INTENSITY_MIN, |
| 653 | .max = flash->cfg.assist_max_ua, |
| 654 | .step = AS_TORCH_INTENSITY_STEP, |
| 655 | .val = flash->cfg.assist_max_ua, |
| 656 | }, |
| 657 | }; |
| 658 | struct v4l2_flash_config cfgind = { |
| 659 | .intensity = { |
| 660 | .min = AS_INDICATOR_INTENSITY_MIN, |
| 661 | .max = flash->cfg.indicator_max_ua, |
| 662 | .step = AS_INDICATOR_INTENSITY_STEP, |
| 663 | .val = flash->cfg.indicator_max_ua, |
| 664 | }, |
| 665 | }; |
| 666 | |
| 667 | strlcpy(cfg.dev_name, led->name, sizeof(cfg.dev_name)); |
| 668 | strlcpy(cfgind.dev_name, flash->iled_cdev.name, sizeof(cfg.dev_name)); |
| 669 | |
| 670 | flash->vf = v4l2_flash_init( |
| 671 | &flash->client->dev, of_fwnode_handle(flash->flash_node), |
| 672 | &flash->fled, NULL, &cfg); |
| 673 | if (IS_ERR(flash->vf)) |
| 674 | return PTR_ERR(flash->vf); |
| 675 | |
| 676 | flash->vfind = v4l2_flash_indicator_init( |
| 677 | &flash->client->dev, of_fwnode_handle(flash->indicator_node), |
| 678 | &flash->iled_cdev, &cfgind); |
| 679 | if (IS_ERR(flash->vfind)) { |
| 680 | v4l2_flash_release(flash->vf); |
| 681 | return PTR_ERR(flash->vfind); |
| 682 | } |
| 683 | |
| 684 | return 0; |
| 685 | } |
| 686 | |
| 687 | static int as3645a_probe(struct i2c_client *client) |
| 688 | { |
| 689 | struct as3645a_names names; |
| 690 | struct as3645a *flash; |
| 691 | int rval; |
| 692 | |
| 693 | if (client->dev.of_node == NULL) |
| 694 | return -ENODEV; |
| 695 | |
| 696 | flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); |
| 697 | if (flash == NULL) |
| 698 | return -ENOMEM; |
| 699 | |
| 700 | flash->client = client; |
| 701 | |
| 702 | rval = as3645a_parse_node(flash, &names, client->dev.of_node); |
| 703 | if (rval < 0) |
| 704 | return rval; |
| 705 | |
| 706 | rval = as3645a_detect(flash); |
| 707 | if (rval < 0) |
| 708 | goto out_put_nodes; |
| 709 | |
| 710 | mutex_init(&flash->mutex); |
| 711 | i2c_set_clientdata(client, flash); |
| 712 | |
| 713 | rval = as3645a_setup(flash); |
| 714 | if (rval) |
| 715 | goto out_mutex_destroy; |
| 716 | |
| 717 | rval = as3645a_led_class_setup(flash, &names); |
| 718 | if (rval) |
| 719 | goto out_mutex_destroy; |
| 720 | |
| 721 | rval = as3645a_v4l2_setup(flash); |
| 722 | if (rval) |
| 723 | goto out_led_classdev_flash_unregister; |
| 724 | |
| 725 | return 0; |
| 726 | |
| 727 | out_led_classdev_flash_unregister: |
| 728 | led_classdev_flash_unregister(&flash->fled); |
| 729 | |
| 730 | out_mutex_destroy: |
| 731 | mutex_destroy(&flash->mutex); |
| 732 | |
| 733 | out_put_nodes: |
| 734 | of_node_put(flash->flash_node); |
| 735 | of_node_put(flash->indicator_node); |
| 736 | |
| 737 | return rval; |
| 738 | } |
| 739 | |
| 740 | static int as3645a_remove(struct i2c_client *client) |
| 741 | { |
| 742 | struct as3645a *flash = i2c_get_clientdata(client); |
| 743 | |
| 744 | as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); |
| 745 | |
| 746 | v4l2_flash_release(flash->vf); |
Sakari Ailus | 12c4b878 | 2017-09-22 12:32:38 +0300 | [diff] [blame] | 747 | v4l2_flash_release(flash->vfind); |
Sakari Ailus | a56ba8f | 2015-04-26 17:56:54 -0400 | [diff] [blame] | 748 | |
| 749 | led_classdev_flash_unregister(&flash->fled); |
| 750 | led_classdev_unregister(&flash->iled_cdev); |
| 751 | |
| 752 | mutex_destroy(&flash->mutex); |
| 753 | |
| 754 | of_node_put(flash->flash_node); |
| 755 | of_node_put(flash->indicator_node); |
| 756 | |
| 757 | return 0; |
| 758 | } |
| 759 | |
| 760 | static const struct i2c_device_id as3645a_id_table[] = { |
| 761 | { AS_NAME, 0 }, |
| 762 | { }, |
| 763 | }; |
| 764 | MODULE_DEVICE_TABLE(i2c, as3645a_id_table); |
| 765 | |
| 766 | static const struct of_device_id as3645a_of_table[] = { |
| 767 | { .compatible = "ams,as3645a" }, |
| 768 | { }, |
| 769 | }; |
| 770 | MODULE_DEVICE_TABLE(of, as3645a_of_table); |
| 771 | |
| 772 | static struct i2c_driver as3645a_i2c_driver = { |
| 773 | .driver = { |
| 774 | .of_match_table = as3645a_of_table, |
| 775 | .name = AS_NAME, |
| 776 | }, |
| 777 | .probe_new = as3645a_probe, |
| 778 | .remove = as3645a_remove, |
| 779 | .id_table = as3645a_id_table, |
| 780 | }; |
| 781 | |
| 782 | module_i2c_driver(as3645a_i2c_driver); |
| 783 | |
| 784 | MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); |
| 785 | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>"); |
| 786 | MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); |
| 787 | MODULE_LICENSE("GPL v2"); |