drivers/net/wireless/mwifiex/cfg80211.c

/*
 * Marvell Wireless LAN device driver: CFG80211
 *
 * Copyright (C) 2011, Marvell International Ltd.
 *
 * This software file (the "File") is distributed by Marvell International
 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
 * (the "License").  You may use, redistribute and/or modify this File in
 * accordance with the terms and conditions of the License, a copy of which
 * is available by writing to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
 *
 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
 * this warranty disclaimer.
 */

#include "cfg80211.h"
#include "main.h"

/*
 * This function maps the nl802.11 channel type into driver channel type.
 *
 * The mapping is as follows -
 *      NL80211_CHAN_NO_HT     -> NO_SEC_CHANNEL
 *      NL80211_CHAN_HT20      -> NO_SEC_CHANNEL
 *      NL80211_CHAN_HT40PLUS  -> SEC_CHANNEL_ABOVE
 *      NL80211_CHAN_HT40MINUS -> SEC_CHANNEL_BELOW
 *      Others                 -> NO_SEC_CHANNEL
 */
static int
mwifiex_cfg80211_channel_type_to_mwifiex_channels(enum nl80211_channel_type
						  channel_type)
{
	int channel;
	switch (channel_type) {
	case NL80211_CHAN_NO_HT:
	case NL80211_CHAN_HT20:
		channel = NO_SEC_CHANNEL;
		break;
	case NL80211_CHAN_HT40PLUS:
		channel = SEC_CHANNEL_ABOVE;
		break;
	case NL80211_CHAN_HT40MINUS:
		channel = SEC_CHANNEL_BELOW;
		break;
	default:
		channel = NO_SEC_CHANNEL;
	}
	return channel;
}

/*
 * This function maps the driver channel type into nl802.11 channel type.
 *
 * The mapping is as follows -
 *      NO_SEC_CHANNEL      -> NL80211_CHAN_HT20
 *      SEC_CHANNEL_ABOVE   -> NL80211_CHAN_HT40PLUS
 *      SEC_CHANNEL_BELOW   -> NL80211_CHAN_HT40MINUS
 *      Others              -> NL80211_CHAN_HT20
 */
static enum nl80211_channel_type
mwifiex_channels_to_cfg80211_channel_type(int channel_type)
{
	int channel;
	switch (channel_type) {
	case NO_SEC_CHANNEL:
		channel = NL80211_CHAN_HT20;
		break;
	case SEC_CHANNEL_ABOVE:
		channel = NL80211_CHAN_HT40PLUS;
		break;
	case SEC_CHANNEL_BELOW:
		channel = NL80211_CHAN_HT40MINUS;
		break;
	default:
		channel = NL80211_CHAN_HT20;
	}
	return channel;
}

/*
 * This function checks whether WEP is set.
 */
static int
mwifiex_is_alg_wep(u32 cipher)
{
	int alg = 0;

	switch (cipher) {
	case MWIFIEX_ENCRYPTION_MODE_WEP40:
	case MWIFIEX_ENCRYPTION_MODE_WEP104:
		alg = 1;
		break;
	default:
		alg = 0;
		break;
	}
	return alg;
}

/*
 * This function maps the given cipher type into driver specific type.
 *
 * It also sets a flag to indicate whether WPA is enabled or not.
 *
 * The mapping table is -
 *      Input cipher                Driver cipher type              WPA enabled?
 *      ------------                ------------------              ------------
 *      IW_AUTH_CIPHER_NONE         MWIFIEX_ENCRYPTION_MODE_NONE    No
 *      WLAN_CIPHER_SUITE_WEP40     MWIFIEX_ENCRYPTION_MODE_WEP40   No
 *      WLAN_CIPHER_SUITE_WEP104    MWIFIEX_ENCRYPTION_MODE_WEP104  No
 *      WLAN_CIPHER_SUITE_TKIP      MWIFIEX_ENCRYPTION_MODE_TKIP    Yes
 *      WLAN_CIPHER_SUITE_CCMP      MWIFIEX_ENCRYPTION_MODE_CCMP    Yes
 *      Others                      -1                              No
 */
static int
mwifiex_get_mwifiex_cipher(u32 cipher, int *wpa_enabled)
{
	int encrypt_mode;

	if (wpa_enabled)
		*wpa_enabled = 0;
	switch (cipher) {
	case IW_AUTH_CIPHER_NONE:
		encrypt_mode = MWIFIEX_ENCRYPTION_MODE_NONE;
		break;
	case WLAN_CIPHER_SUITE_WEP40:
		encrypt_mode = MWIFIEX_ENCRYPTION_MODE_WEP40;
		break;
	case WLAN_CIPHER_SUITE_WEP104:
		encrypt_mode = MWIFIEX_ENCRYPTION_MODE_WEP104;
		break;
	case WLAN_CIPHER_SUITE_TKIP:
		encrypt_mode = MWIFIEX_ENCRYPTION_MODE_TKIP;
		if (wpa_enabled)
			*wpa_enabled = 1;
		break;
	case WLAN_CIPHER_SUITE_CCMP:
		encrypt_mode = MWIFIEX_ENCRYPTION_MODE_CCMP;
		if (wpa_enabled)
			*wpa_enabled = 1;
		break;
	default:
		encrypt_mode = -1;
	}

	return encrypt_mode;
}

/*
 * This function retrieves the private structure from kernel wiphy structure.
 */
static void *mwifiex_cfg80211_get_priv(struct wiphy *wiphy)
{
	return (void *) (*(unsigned long *) wiphy_priv(wiphy));
}

/*
 * CFG802.11 operation handler to delete a network key.
 */
static int
mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev,
			 u8 key_index, bool pairwise, const u8 *mac_addr)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
	int ret = 0;

	ret = mwifiex_set_encode(priv, NULL, 0, key_index, 1);
	if (ret) {
		wiphy_err(wiphy, "deleting the crypto keys\n");
		return -EFAULT;
	}

	wiphy_dbg(wiphy, "info: crypto keys deleted\n");
	return 0;
}

/*
 * CFG802.11 operation handler to set Tx power.
 */
static int
mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy,
			      enum nl80211_tx_power_setting type,
			      int dbm)
{
	int ret = 0;
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	ret = mwifiex_set_tx_power(priv, type, dbm);

	return ret;
}

/*
 * CFG802.11 operation handler to set Power Save option.
 *
 * The timeout value, if provided, is currently ignored.
 */
static int
mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
				struct net_device *dev,
				bool enabled, int timeout)
{
	int ret = 0;
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	if (timeout)
		wiphy_dbg(wiphy,
			"info: ignoring the timeout value"
			" for IEEE power save\n");

	ret = mwifiex_drv_set_power(priv, enabled);

	return ret;
}

/*
 * CFG802.11 operation handler to set the default network key.
 */
static int
mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
				 u8 key_index, bool unicast,
				 bool multicast)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
	int ret;

	ret = mwifiex_set_encode(priv, NULL, 0, key_index, 0);

	wiphy_dbg(wiphy, "info: set default Tx key index\n");

	if (ret)
		return -EFAULT;

	return 0;
}

/*
 * CFG802.11 operation handler to add a network key.
 */
static int
mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev,
			 u8 key_index, bool pairwise, const u8 *mac_addr,
			 struct key_params *params)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
	int ret = 0;
	int encrypt_mode;

	encrypt_mode = mwifiex_get_mwifiex_cipher(params->cipher, NULL);

	if (encrypt_mode != -1)
		ret = mwifiex_set_encode(priv, params->key, params->key_len,
						key_index, 0);

	wiphy_dbg(wiphy, "info: crypto keys added\n");

	if (ret)
		return -EFAULT;

	return 0;
}

/*
 * This function sends domain information to the firmware.
 *
 * The following information are passed to the firmware -
 *      - Country codes
 *      - Sub bands (first channel, number of channels, maximum Tx power)
 */
static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
{
	u8 no_of_triplet = 0;
	struct ieee80211_country_ie_triplet *t;
	u8 no_of_parsed_chan = 0;
	u8 first_chan = 0, next_chan = 0, max_pwr = 0;
	u8 i, flag = 0;
	enum ieee80211_band band;
	struct ieee80211_supported_band *sband;
	struct ieee80211_channel *ch;
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
	struct mwifiex_adapter *adapter = priv->adapter;
	struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg;
	int ret = 0;

	/* Set country code */
	domain_info->country_code[0] = priv->country_code[0];
	domain_info->country_code[1] = priv->country_code[1];
	domain_info->country_code[2] = ' ';

	band = mwifiex_band_to_radio_type(adapter->config_bands);
	if (!wiphy->bands[band]) {
		wiphy_err(wiphy, "11D: setting domain info in FW\n");
		return -1;
	}

	sband = wiphy->bands[band];

	for (i = 0; i < sband->n_channels ; i++) {
		ch = &sband->channels[i];
		if (ch->flags & IEEE80211_CHAN_DISABLED)
			continue;

		if (!flag) {
			flag = 1;
			first_chan = (u32) ch->hw_value;
			next_chan = first_chan;
			max_pwr = ch->max_power;
			no_of_parsed_chan = 1;
			continue;
		}

		if (ch->hw_value == next_chan + 1 &&
				ch->max_power == max_pwr) {
			next_chan++;
			no_of_parsed_chan++;
		} else {
			t = &domain_info->triplet[no_of_triplet];
			t->chans.first_channel = first_chan;
			t->chans.num_channels = no_of_parsed_chan;
			t->chans.max_power = max_pwr;
			no_of_triplet++;
			first_chan = (u32) ch->hw_value;
			next_chan = first_chan;
			max_pwr = ch->max_power;
			no_of_parsed_chan = 1;
		}
	}

	if (flag) {
		t = &domain_info->triplet[no_of_triplet];
		t->chans.first_channel = first_chan;
		t->chans.num_channels = no_of_parsed_chan;
		t->chans.max_power = max_pwr;
		no_of_triplet++;
	}

	domain_info->no_of_triplet = no_of_triplet;
	/* Send cmd to FW to set domain info */
	ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
				  HostCmd_ACT_GEN_SET, 0, NULL, NULL);
	if (ret)
		wiphy_err(wiphy, "11D: setting domain info in FW\n");

	return ret;
}

/*
 * CFG802.11 regulatory domain callback function.
 *
 * This function is called when the regulatory domain is changed due to the
 * following reasons -
 *      - Set by driver
 *      - Set by system core
 *      - Set by user
 *      - Set bt Country IE
 */
static int mwifiex_reg_notifier(struct wiphy *wiphy,
		struct regulatory_request *request)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for domain"
			" %c%c\n", request->alpha2[0], request->alpha2[1]);

	memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2));

	switch (request->initiator) {
	case NL80211_REGDOM_SET_BY_DRIVER:
	case NL80211_REGDOM_SET_BY_CORE:
	case NL80211_REGDOM_SET_BY_USER:
		break;
		/* Todo: apply driver specific changes in channel flags based
		   on the request initiator if necessary. */
	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
		break;
	}
	mwifiex_send_domain_info_cmd_fw(wiphy);

	return 0;
}

/*
 * This function sets the RF channel.
 *
 * This function creates multiple IOCTL requests, populates them accordingly
 * and issues them to set the band/channel and frequency.
 */
static int
mwifiex_set_rf_channel(struct mwifiex_private *priv,
		       struct ieee80211_channel *chan,
		       enum nl80211_channel_type channel_type)
{
	struct mwifiex_chan_freq_power cfp;
	int ret = 0;
	int status = 0;
	struct mwifiex_ds_band_cfg band_cfg;
	int mode;
	u8 wait_option = MWIFIEX_IOCTL_WAIT;
	u32 config_bands = 0;
	struct wiphy *wiphy = priv->wdev->wiphy;

	mode = mwifiex_drv_get_mode(priv, wait_option);

	if (chan) {
		memset(&band_cfg, 0, sizeof(band_cfg));
		/* Set appropriate bands */
		if (chan->band == IEEE80211_BAND_2GHZ)
			config_bands = BAND_B | BAND_G | BAND_GN;
		else
			config_bands = BAND_AN | BAND_A;
		if (mode == MWIFIEX_BSS_MODE_INFRA
		    || mode == MWIFIEX_BSS_MODE_AUTO) {
			band_cfg.config_bands = config_bands;
		} else if (mode == MWIFIEX_BSS_MODE_IBSS) {
			band_cfg.config_bands = config_bands;
			band_cfg.adhoc_start_band = config_bands;
		}
		/* Set channel offset */
		band_cfg.sec_chan_offset =
			mwifiex_cfg80211_channel_type_to_mwifiex_channels
			(channel_type);
		status = mwifiex_radio_ioctl_band_cfg(priv, HostCmd_ACT_GEN_SET,
						      &band_cfg);

		if (status)
			return -EFAULT;
		mwifiex_send_domain_info_cmd_fw(wiphy);
	}

	wiphy_dbg(wiphy, "info: setting band %d, channel offset %d and "
		"mode %d\n", config_bands, band_cfg.sec_chan_offset, mode);
	if (!chan)
		return ret;

	memset(&cfp, 0, sizeof(cfp));
	cfp.freq = chan->center_freq;
	/* Convert frequency to channel */
	cfp.channel = ieee80211_frequency_to_channel(chan->center_freq);

	status = mwifiex_bss_ioctl_channel(priv, HostCmd_ACT_GEN_SET, &cfp);
	if (status)
		return -EFAULT;

	ret = mwifiex_drv_change_adhoc_chan(priv, cfp.channel);

	return ret;
}

/*
 * CFG802.11 operation handler to set channel.
 *
 * This function can only be used when station is not connected.
 */
static int
mwifiex_cfg80211_set_channel(struct wiphy *wiphy, struct net_device *dev,
			     struct ieee80211_channel *chan,
			     enum nl80211_channel_type channel_type)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	if (priv->media_connected) {
		wiphy_err(wiphy, "This setting is valid only when station "
				"is not connected\n");
		return -EINVAL;
	}

	return mwifiex_set_rf_channel(priv, chan, channel_type);
}

/*
 * This function sets the fragmentation threshold.
 *
 * This function creates an IOCTL request, populates it accordingly
 * and issues an IOCTL.
 *
 * The fragmentation threshold value must lies between MWIFIEX_FRAG_MIN_VALUE
 * and MWIFIEX_FRAG_MAX_VALUE.
 */
static int
mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
{
	int ret = 0;
	int status = 0;
	struct mwifiex_wait_queue *wait = NULL;
	u8 wait_option = MWIFIEX_IOCTL_WAIT;

	if (frag_thr < MWIFIEX_FRAG_MIN_VALUE
	    || frag_thr > MWIFIEX_FRAG_MAX_VALUE)
		return -EINVAL;

	wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
	if (!wait)
		return -ENOMEM;

	status = mwifiex_snmp_mib_ioctl(priv, wait, FRAG_THRESH_I,
					HostCmd_ACT_GEN_SET, &frag_thr);

	if (mwifiex_request_ioctl(priv, wait, status, wait_option))
		ret = -EFAULT;

	kfree(wait);
	return ret;
}

/*
 * This function sets the RTS threshold.
 *
 * This function creates an IOCTL request, populates it accordingly
 * and issues an IOCTL.
 */
static int
mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr)
{
	int ret = 0;
	struct mwifiex_wait_queue *wait = NULL;
	int status = 0;
	u8 wait_option = MWIFIEX_IOCTL_WAIT;

	if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE)
		rts_thr = MWIFIEX_RTS_MAX_VALUE;

	wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
	if (!wait)
		return -ENOMEM;

	status = mwifiex_snmp_mib_ioctl(priv, wait, RTS_THRESH_I,
					HostCmd_ACT_GEN_SET, &rts_thr);

	if (mwifiex_request_ioctl(priv, wait, status, wait_option))
		ret = -EFAULT;

	kfree(wait);
	return ret;
}

/*
 * CFG802.11 operation handler to set wiphy parameters.
 *
 * This function can be used to set the RTS threshold and the
 * Fragmentation threshold of the driver.
 */
static int
mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	int ret = 0;

	if (changed & WIPHY_PARAM_RTS_THRESHOLD)
		ret = mwifiex_set_rts(priv, wiphy->rts_threshold);

	if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
		ret = mwifiex_set_frag(priv, wiphy->frag_threshold);

	return ret;
}

/*
 * CFG802.11 operation handler to change interface type.
 *
 * This function creates an IOCTL request, populates it accordingly
 * and issues an IOCTL.
 *
 * The function also maps the CFG802.11 mode type into driver mode type.
 *      NL80211_IFTYPE_ADHOC        -> MWIFIEX_BSS_MODE_IBSS
 *      NL80211_IFTYPE_STATION      -> MWIFIEX_BSS_MODE_INFRA
 *      NL80211_IFTYPE_UNSPECIFIED  -> MWIFIEX_BSS_MODE_AUTO
 */
static int
mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
				     struct net_device *dev,
				     enum nl80211_iftype type, u32 *flags,
				     struct vif_params *params)
{
	int ret = 0;
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	int mode = -1;
	struct mwifiex_wait_queue *wait = NULL;
	int status = 0;

	wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
	if (!wait)
		return -ENOMEM;

	switch (type) {
	case NL80211_IFTYPE_ADHOC:
		mode = MWIFIEX_BSS_MODE_IBSS;
		dev->ieee80211_ptr->iftype = NL80211_IFTYPE_ADHOC;
		wiphy_dbg(wiphy, "info: setting interface type to adhoc\n");
		break;
	case NL80211_IFTYPE_STATION:
		mode = MWIFIEX_BSS_MODE_INFRA;
		dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
		wiphy_dbg(wiphy, "info: Setting interface type to managed\n");
		break;
	case NL80211_IFTYPE_UNSPECIFIED:
		mode = MWIFIEX_BSS_MODE_AUTO;
		dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
		wiphy_dbg(wiphy, "info: setting interface type to auto\n");
		break;
	default:
		ret = -EINVAL;
	}
	if (ret)
		goto done;
	status = mwifiex_bss_ioctl_mode(priv, wait, HostCmd_ACT_GEN_SET, &mode);

	if (mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT))
		ret = -EFAULT;

done:
	kfree(wait);
	return ret;
}

/*
 * This function dumps the station information on a buffer.
 *
 * The following information are shown -
 *      - Total bytes transmitted
 *      - Total bytes received
 *      - Total packets transmitted
 *      - Total packets received
 *      - Signal quality level
 *      - Transmission rate
 */
static int
mwifiex_dump_station_info(struct mwifiex_private *priv,
			  struct station_info *sinfo)
{
	struct mwifiex_ds_get_signal signal;
	struct mwifiex_rate_cfg rate;
	int ret = 0;

	sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES |
		STATION_INFO_RX_PACKETS |
		STATION_INFO_TX_PACKETS
		| STATION_INFO_SIGNAL | STATION_INFO_TX_BITRATE;

	/* Get signal information from the firmware */
	memset(&signal, 0, sizeof(struct mwifiex_ds_get_signal));
	if (mwifiex_get_signal_info(priv, MWIFIEX_IOCTL_WAIT, &signal)) {
		dev_err(priv->adapter->dev, "getting signal information\n");
		ret = -EFAULT;
	}

	if (mwifiex_drv_get_data_rate(priv, &rate)) {
		dev_err(priv->adapter->dev, "getting data rate\n");
		ret = -EFAULT;
	}

	sinfo->rx_bytes = priv->stats.rx_bytes;
	sinfo->tx_bytes = priv->stats.tx_bytes;
	sinfo->rx_packets = priv->stats.rx_packets;
	sinfo->tx_packets = priv->stats.tx_packets;
	sinfo->signal = priv->w_stats.qual.level;
	sinfo->txrate.legacy = rate.rate;

	return ret;
}

/*
 * CFG802.11 operation handler to get station information.
 *
 * This function only works in connected mode, and dumps the
 * requested station information, if available.
 */
static int
mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev,
			     u8 *mac, struct station_info *sinfo)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	int ret = 0;

	mwifiex_dump_station_info(priv, sinfo);

	if (!priv->media_connected)
		return -ENOENT;
	if (memcmp(mac, priv->cfg_bssid, ETH_ALEN))
		return -ENOENT;


	ret = mwifiex_dump_station_info(priv, sinfo);

	return ret;
}

/* Supported rates to be advertised to the cfg80211 */

static struct ieee80211_rate mwifiex_rates[] = {
	{.bitrate = 10, .hw_value = 2, },
	{.bitrate = 20, .hw_value = 4, },
	{.bitrate = 55, .hw_value = 11, },
	{.bitrate = 110, .hw_value = 22, },
	{.bitrate = 220, .hw_value = 44, },
	{.bitrate = 60, .hw_value = 12, },
	{.bitrate = 90, .hw_value = 18, },
	{.bitrate = 120, .hw_value = 24, },
	{.bitrate = 180, .hw_value = 36, },
	{.bitrate = 240, .hw_value = 48, },
	{.bitrate = 360, .hw_value = 72, },
	{.bitrate = 480, .hw_value = 96, },
	{.bitrate = 540, .hw_value = 108, },
	{.bitrate = 720, .hw_value = 144, },
};

/* Channel definitions to be advertised to cfg80211 */

static struct ieee80211_channel mwifiex_channels_2ghz[] = {
	{.center_freq = 2412, .hw_value = 1, },
	{.center_freq = 2417, .hw_value = 2, },
	{.center_freq = 2422, .hw_value = 3, },
	{.center_freq = 2427, .hw_value = 4, },
	{.center_freq = 2432, .hw_value = 5, },
	{.center_freq = 2437, .hw_value = 6, },
	{.center_freq = 2442, .hw_value = 7, },
	{.center_freq = 2447, .hw_value = 8, },
	{.center_freq = 2452, .hw_value = 9, },
	{.center_freq = 2457, .hw_value = 10, },
	{.center_freq = 2462, .hw_value = 11, },
	{.center_freq = 2467, .hw_value = 12, },
	{.center_freq = 2472, .hw_value = 13, },
	{.center_freq = 2484, .hw_value = 14, },
};

static struct ieee80211_supported_band mwifiex_band_2ghz = {
	.channels = mwifiex_channels_2ghz,
	.n_channels = ARRAY_SIZE(mwifiex_channels_2ghz),
	.bitrates = mwifiex_rates,
	.n_bitrates = 14,
};

static struct ieee80211_channel mwifiex_channels_5ghz[] = {
	{.center_freq = 5040, .hw_value = 8, },
	{.center_freq = 5060, .hw_value = 12, },
	{.center_freq = 5080, .hw_value = 16, },
	{.center_freq = 5170, .hw_value = 34, },
	{.center_freq = 5190, .hw_value = 38, },
	{.center_freq = 5210, .hw_value = 42, },
	{.center_freq = 5230, .hw_value = 46, },
	{.center_freq = 5180, .hw_value = 36, },
	{.center_freq = 5200, .hw_value = 40, },
	{.center_freq = 5220, .hw_value = 44, },
	{.center_freq = 5240, .hw_value = 48, },
	{.center_freq = 5260, .hw_value = 52, },
	{.center_freq = 5280, .hw_value = 56, },
	{.center_freq = 5300, .hw_value = 60, },
	{.center_freq = 5320, .hw_value = 64, },
	{.center_freq = 5500, .hw_value = 100, },
	{.center_freq = 5520, .hw_value = 104, },
	{.center_freq = 5540, .hw_value = 108, },
	{.center_freq = 5560, .hw_value = 112, },
	{.center_freq = 5580, .hw_value = 116, },
	{.center_freq = 5600, .hw_value = 120, },
	{.center_freq = 5620, .hw_value = 124, },
	{.center_freq = 5640, .hw_value = 128, },
	{.center_freq = 5660, .hw_value = 132, },
	{.center_freq = 5680, .hw_value = 136, },
	{.center_freq = 5700, .hw_value = 140, },
	{.center_freq = 5745, .hw_value = 149, },
	{.center_freq = 5765, .hw_value = 153, },
	{.center_freq = 5785, .hw_value = 157, },
	{.center_freq = 5805, .hw_value = 161, },
	{.center_freq = 5825, .hw_value = 165, },
};

static struct ieee80211_supported_band mwifiex_band_5ghz = {
	.channels = mwifiex_channels_5ghz,
	.n_channels = ARRAY_SIZE(mwifiex_channels_5ghz),
	.bitrates = mwifiex_rates - 4,
	.n_bitrates = ARRAY_SIZE(mwifiex_rates) + 4,
};


/* Supported crypto cipher suits to be advertised to cfg80211 */

static const u32 mwifiex_cipher_suites[] = {
	WLAN_CIPHER_SUITE_WEP40,
	WLAN_CIPHER_SUITE_WEP104,
	WLAN_CIPHER_SUITE_TKIP,
	WLAN_CIPHER_SUITE_CCMP,
};

/*
 * CFG802.11 operation handler for disconnection request.
 *
 * This function does not work when there is already a disconnection
 * procedure going on.
 */
static int
mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
			    u16 reason_code)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);

	if (priv->disconnect)
		return -EBUSY;

	priv->disconnect = 1;
	if (mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL))
		return -EFAULT;

	wiphy_dbg(wiphy, "info: successfully disconnected from %pM:"
		" reason code %d\n", priv->cfg_bssid, reason_code);

	queue_work(priv->workqueue, &priv->cfg_workqueue);

	return 0;
}

/*
 * This function informs the CFG802.11 subsystem of a new IBSS.
 *
 * The following information are sent to the CFG802.11 subsystem
 * to register the new IBSS. If we do not register the new IBSS,
 * a kernel panic will result.
 *      - SSID
 *      - SSID length
 *      - BSSID
 *      - Channel
 */
static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
{
	int ret = 0;
	struct ieee80211_channel *chan;
	struct mwifiex_bss_info bss_info;
	int ie_len = 0;
	u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)];

	ret = mwifiex_get_bss_info(priv, &bss_info);
	if (ret)
		return ret;

	ie_buf[0] = WLAN_EID_SSID;
	ie_buf[1] = bss_info.ssid.ssid_len;

	memcpy(&ie_buf[sizeof(struct ieee_types_header)],
			&bss_info.ssid.ssid,
			bss_info.ssid.ssid_len);
	ie_len = ie_buf[1] + sizeof(struct ieee_types_header);

	chan = __ieee80211_get_channel(priv->wdev->wiphy,
			ieee80211_channel_to_frequency(bss_info.bss_chan,
						priv->curr_bss_params.band));

	cfg80211_inform_bss(priv->wdev->wiphy, chan,
		bss_info.bssid, 0, WLAN_CAPABILITY_IBSS,
		0, ie_buf, ie_len, 0, GFP_KERNEL);
	memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN);

	return ret;
}

/*
 * This function informs the CFG802.11 subsystem of a new BSS connection.
 *
 * The following information are sent to the CFG802.11 subsystem
 * to register the new BSS connection. If we do not register the new BSS,
 * a kernel panic will result.
 *      - MAC address
 *      - Capabilities
 *      - Beacon period
 *      - RSSI value
 *      - Channel
 *      - Supported rates IE
 *      - Extended capabilities IE
 *      - DS parameter set IE
 *      - HT Capability IE
 *      - Vendor Specific IE (221)
 *      - WPA IE
 *      - RSN IE
 */
static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv,
					       struct mwifiex_802_11_ssid *ssid)
{
	struct mwifiex_scan_resp scan_resp;
	struct mwifiex_bssdescriptor *scan_table;
	int i, j;
	struct ieee80211_channel *chan;
	u8 *ie, *tmp, *ie_buf;
	u32 ie_len;
	u64 ts = 0;
	u8 *beacon;
	int beacon_size;
	u8 element_id, element_len;

	memset(&scan_resp, 0, sizeof(scan_resp));
	if (mwifiex_get_scan_table(priv, MWIFIEX_IOCTL_WAIT, &scan_resp))
		return -EFAULT;

#define MAX_IE_BUF	2048
	ie_buf = kzalloc(MAX_IE_BUF, GFP_KERNEL);
	if (!ie_buf) {
		dev_err(priv->adapter->dev, "%s: failed to alloc ie_buf\n",
						__func__);
		return -ENOMEM;
	}

	scan_table = (struct mwifiex_bssdescriptor *) scan_resp.scan_table;
	for (i = 0; i < scan_resp.num_in_scan_table; i++) {
		if (ssid) {
			/* Inform specific BSS only */
			if (memcmp(ssid->ssid, scan_table[i].ssid.ssid,
					   ssid->ssid_len))
				continue;
		}
		memset(ie_buf, 0, MAX_IE_BUF);
		ie_buf[0] = WLAN_EID_SSID;
		ie_buf[1] = scan_table[i].ssid.ssid_len;
		memcpy(&ie_buf[sizeof(struct ieee_types_header)],
		       scan_table[i].ssid.ssid, ie_buf[1]);

		ie = ie_buf + ie_buf[1] + sizeof(struct ieee_types_header);
		ie_len = ie_buf[1] + sizeof(struct ieee_types_header);

		ie[0] = WLAN_EID_SUPP_RATES;

		for (j = 0; j < sizeof(scan_table[i].supported_rates); j++) {
			if (!scan_table[i].supported_rates[j])
				break;
			else
				ie[j + sizeof(struct ieee_types_header)] =
					scan_table[i].supported_rates[j];
		}

		ie[1] = j;
		ie_len += ie[1] + sizeof(struct ieee_types_header);

		beacon = scan_table[i].beacon_buf;
		beacon_size = scan_table[i].beacon_buf_size;

		/* Skip time stamp, beacon interval and capability */

		if (beacon) {
			beacon += sizeof(scan_table[i].beacon_period)
				+ sizeof(scan_table[i].time_stamp) +
				+sizeof(scan_table[i].cap_info_bitmap);

			beacon_size -= sizeof(scan_table[i].beacon_period)
				+ sizeof(scan_table[i].time_stamp)
				+ sizeof(scan_table[i].cap_info_bitmap);
		}

		while (beacon_size >= sizeof(struct ieee_types_header)) {
			ie = ie_buf + ie_len;
			element_id = *beacon;
			element_len = *(beacon + 1);
			if (beacon_size < (int) element_len +
			    sizeof(struct ieee_types_header)) {
				dev_err(priv->adapter->dev, "%s: in processing"
					" IE, bytes left < IE length\n",
					__func__);
				break;
			}
			switch (element_id) {
			case WLAN_EID_EXT_CAPABILITY:
			case WLAN_EID_DS_PARAMS:
			case WLAN_EID_HT_CAPABILITY:
			case WLAN_EID_VENDOR_SPECIFIC:
			case WLAN_EID_RSN:
			case WLAN_EID_BSS_AC_ACCESS_DELAY:
				ie[0] = element_id;
				ie[1] = element_len;
				tmp = (u8 *) beacon;
				memcpy(&ie[sizeof(struct ieee_types_header)],
				       tmp + sizeof(struct ieee_types_header),
				       element_len);
				ie_len += ie[1] +
					sizeof(struct ieee_types_header);
				break;
			default:
				break;
			}
			beacon += element_len +
					sizeof(struct ieee_types_header);
			beacon_size -= element_len +
					sizeof(struct ieee_types_header);
		}
		chan = ieee80211_get_channel(priv->wdev->wiphy,
						scan_table[i].freq);
		cfg80211_inform_bss(priv->wdev->wiphy, chan,
					scan_table[i].mac_address,
					ts, scan_table[i].cap_info_bitmap,
					scan_table[i].beacon_period,
					ie_buf, ie_len,
					scan_table[i].rssi, GFP_KERNEL);
	}

	kfree(ie_buf);
	return 0;
}

/*
 * This function connects with a BSS.
 *
 * This function handles both Infra and Ad-Hoc modes. It also performs
 * validity checking on the provided parameters, disconnects from the
 * current BSS (if any), sets up the association/scan parameters,
 * including security settings, and performs specific SSID scan before
 * trying to connect.
 *
 * For Infra mode, the function returns failure if the specified SSID
 * is not found in scan table. However, for Ad-Hoc mode, it can create
 * the IBSS if it does not exist. On successful completion in either case,
 * the function notifies the CFG802.11 subsystem of the new BSS connection,
 * otherwise the kernel will panic.
 */
static int
mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
		       u8 *bssid, int mode, struct ieee80211_channel *channel,
		       struct cfg80211_connect_params *sme, bool privacy)
{
	struct mwifiex_802_11_ssid req_ssid;
	struct mwifiex_ssid_bssid ssid_bssid;
	int ret = 0;
	int auth_type = 0, pairwise_encrypt_mode = 0, wpa_enabled = 0;
	int group_encrypt_mode = 0;
	int alg_is_wep = 0;

	memset(&req_ssid, 0, sizeof(struct mwifiex_802_11_ssid));
	memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));

	req_ssid.ssid_len = ssid_len;
	if (ssid_len > IEEE80211_MAX_SSID_LEN) {
		dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
		return -EINVAL;
	}

	memcpy(req_ssid.ssid, ssid, ssid_len);
	if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) {
		dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
		return -EINVAL;
	}

	/* disconnect before try to associate */
	mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL);

	if (channel)
		ret = mwifiex_set_rf_channel(priv, channel,
				mwifiex_channels_to_cfg80211_channel_type
				(priv->adapter->chan_offset));

	ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);	/* Disable keys */

	if (mode == MWIFIEX_BSS_MODE_IBSS) {
		/* "privacy" is set only for ad-hoc mode */
		if (privacy) {
			/*
			 * Keep MWIFIEX_ENCRYPTION_MODE_WEP104 for now so that
			 * the firmware can find a matching network from the
			 * scan. The cfg80211 does not give us the encryption
			 * mode at this stage so just setting it to WEP here.
			 */
			priv->sec_info.encryption_mode =
					MWIFIEX_ENCRYPTION_MODE_WEP104;
			priv->sec_info.authentication_mode =
					MWIFIEX_AUTH_MODE_OPEN;
		}

		goto done;
	}

	/* Now handle infra mode. "sme" is valid for infra mode only */
	if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC
			|| sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
		auth_type = MWIFIEX_AUTH_MODE_OPEN;
	else if (sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY)
		auth_type = MWIFIEX_AUTH_MODE_SHARED;

	if (sme->crypto.n_ciphers_pairwise) {
		pairwise_encrypt_mode = mwifiex_get_mwifiex_cipher(sme->crypto.
					ciphers_pairwise[0], &wpa_enabled);
		priv->sec_info.encryption_mode = pairwise_encrypt_mode;
		priv->sec_info.authentication_mode = auth_type;
	}

	if (sme->crypto.cipher_group) {
		group_encrypt_mode = mwifiex_get_mwifiex_cipher(sme->crypto.
						   cipher_group, &wpa_enabled);
		priv->sec_info.encryption_mode = group_encrypt_mode;
		priv->sec_info.authentication_mode = auth_type;
	}
	if (sme->ie)
		ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len);

	if (sme->key) {
		alg_is_wep = mwifiex_is_alg_wep(pairwise_encrypt_mode)
			| mwifiex_is_alg_wep(group_encrypt_mode);
		if (alg_is_wep) {
			dev_dbg(priv->adapter->dev,
				"info: setting wep encryption"
				" with key len %d\n", sme->key_len);
			ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
							sme->key_idx, 0);
		}
	}
done:
	/* Do specific SSID scanning */
	if (mwifiex_request_scan(priv, MWIFIEX_IOCTL_WAIT, &req_ssid)) {
		dev_err(priv->adapter->dev, "scan error\n");
		return -EFAULT;
	}


	memcpy(&ssid_bssid.ssid, &req_ssid, sizeof(struct mwifiex_802_11_ssid));

	if (mode != MWIFIEX_BSS_MODE_IBSS) {
		if (mwifiex_find_best_bss(priv, MWIFIEX_IOCTL_WAIT,
					  &ssid_bssid))
			return -EFAULT;
		/* Inform the BSS information to kernel, otherwise
		 * kernel will give a panic after successful assoc */
		if (mwifiex_inform_bss_from_scan_result(priv, &req_ssid))
			return -EFAULT;
	}

	dev_dbg(priv->adapter->dev, "info: trying to associate to %s and bssid %pM\n",
	       (char *) req_ssid.ssid, ssid_bssid.bssid);

	memcpy(&priv->cfg_bssid, ssid_bssid.bssid, 6);

	/* Connect to BSS by ESSID */
	memset(&ssid_bssid.bssid, 0, ETH_ALEN);

	if (mwifiex_bss_start(priv, MWIFIEX_IOCTL_WAIT, &ssid_bssid))
		return -EFAULT;

	if (mode == MWIFIEX_BSS_MODE_IBSS) {
		/* Inform the BSS information to kernel, otherwise
		 * kernel will give a panic after successful assoc */
		if (mwifiex_cfg80211_inform_ibss_bss(priv))
			return -EFAULT;
	}

	return ret;
}

/*
 * CFG802.11 operation handler for association request.
 *
 * This function does not work when the current mode is set to Ad-Hoc, or
 * when there is already an association procedure going on. The given BSS
 * information is used to associate.
 */
static int
mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
			 struct cfg80211_connect_params *sme)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	int ret = 0;
	int mode = 0;

	if (priv->assoc_request)
		return -EBUSY;

	mode = mwifiex_drv_get_mode(priv, MWIFIEX_IOCTL_WAIT);

	if (mode == MWIFIEX_BSS_MODE_IBSS) {
		wiphy_err(wiphy, "received infra assoc request "
				"when station is in ibss mode\n");
		goto done;
	}

	priv->assoc_request = 1;

	wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n",
	       (char *) sme->ssid, sme->bssid);

	ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
				     mode, sme->channel, sme, 0);

done:
	priv->assoc_result = ret;
	queue_work(priv->workqueue, &priv->cfg_workqueue);
	return ret;
}

/*
 * CFG802.11 operation handler to join an IBSS.
 *
 * This function does not work in any mode other than Ad-Hoc, or if
 * a join operation is already in progress.
 */
static int
mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
			   struct cfg80211_ibss_params *params)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
	int ret = 0;
	int mode = 0;

	if (priv->ibss_join_request)
		return -EBUSY;

	mode = mwifiex_drv_get_mode(priv, MWIFIEX_IOCTL_WAIT);
	if (mode != MWIFIEX_BSS_MODE_IBSS) {
		wiphy_err(wiphy, "request to join ibss received "
				"when station is not in ibss mode\n");
		goto done;
	}

	priv->ibss_join_request = 1;

	wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n",
	       (char *) params->ssid, params->bssid);

	ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid,
				     params->bssid, mode, params->channel, NULL,
				     params->privacy);
done:
	priv->ibss_join_result = ret;
	queue_work(priv->workqueue, &priv->cfg_workqueue);
	return ret;
}

/*
 * CFG802.11 operation handler to leave an IBSS.
 *
 * This function does not work if a leave operation is
 * already in progress.
 */
static int
mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
	struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);

	if (priv->disconnect)
		return -EBUSY;

	priv->disconnect = 1;

	wiphy_dbg(wiphy, "info: disconnecting from essid %pM\n",
			priv->cfg_bssid);
	if (mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL))
		return -EFAULT;

	queue_work(priv->workqueue, &priv->cfg_workqueue);

	return 0;
}

/*
 * CFG802.11 operation handler for scan request.
 *
 * This function issues a scan request to the firmware based upon
 * the user specified scan configuration. On successfull completion,
 * it also informs the results.
 */
static int
mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev,
		      struct cfg80211_scan_request *request)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);

	wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name);

	if (priv->scan_request && priv->scan_request != request)
		return -EBUSY;

	priv->scan_request = request;

	queue_work(priv->workqueue, &priv->cfg_workqueue);
	return 0;
}

/*
 * This function sets up the CFG802.11 specific HT capability fields
 * with default values.
 *
 * The following default values are set -
 *      - HT Supported = True
 *      - Maximum AMPDU length factor = 0x3
 *      - Minimum AMPDU spacing = 0x6
 *      - HT Capabilities map = IEEE80211_HT_CAP_SUP_WIDTH_20_40 (0x0002)
 *      - MCS information, Rx mask = 0xff
 *      - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
 */
static void
mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
		      struct mwifiex_private *priv)
{
	int rx_mcs_supp;
	struct ieee80211_mcs_info mcs_set;
	u8 *mcs = (u8 *)&mcs_set;
	struct mwifiex_adapter *adapter = priv->adapter;

	ht_info->ht_supported = true;
	ht_info->ampdu_factor = 0x3;
	ht_info->ampdu_density = 0x6;

	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40;

	rx_mcs_supp = GET_RXMCSSUPP(priv->adapter->hw_dev_mcs_support);
	/* Set MCS for 1x1 */
	memset(mcs, 0xff, rx_mcs_supp);
	/* Clear all the other values */
	memset(&mcs[rx_mcs_supp], 0,
			sizeof(struct ieee80211_mcs_info) - rx_mcs_supp);
	if (priv->bss_mode == MWIFIEX_BSS_MODE_INFRA ||
			ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
		/* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
		SETHT_MCS32(mcs_set.rx_mask);

	memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info));

	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
}

/* station cfg80211 operations */
static struct cfg80211_ops mwifiex_cfg80211_ops = {
	.change_virtual_intf = mwifiex_cfg80211_change_virtual_intf,
	.scan = mwifiex_cfg80211_scan,
	.connect = mwifiex_cfg80211_connect,
	.disconnect = mwifiex_cfg80211_disconnect,
	.get_station = mwifiex_cfg80211_get_station,
	.set_wiphy_params = mwifiex_cfg80211_set_wiphy_params,
	.set_channel = mwifiex_cfg80211_set_channel,
	.join_ibss = mwifiex_cfg80211_join_ibss,
	.leave_ibss = mwifiex_cfg80211_leave_ibss,
	.add_key = mwifiex_cfg80211_add_key,
	.del_key = mwifiex_cfg80211_del_key,
	.set_default_key = mwifiex_cfg80211_set_default_key,
	.set_power_mgmt = mwifiex_cfg80211_set_power_mgmt,
	.set_tx_power = mwifiex_cfg80211_set_tx_power,
};

/*
 * This function registers the device with CFG802.11 subsystem.
 *
 * The function creates the wireless device/wiphy, populates it with
 * default parameters and handler function pointers, and finally
 * registers the device.
 */
int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
			      struct mwifiex_private *priv)
{
	int ret = 0;
	void *wdev_priv = NULL;
	struct wireless_dev *wdev;

	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
	if (!wdev) {
		dev_err(priv->adapter->dev, "%s: allocating wireless device\n",
						__func__);
		return -ENOMEM;
	}
	wdev->wiphy =
		wiphy_new(&mwifiex_cfg80211_ops,
			  sizeof(struct mwifiex_private *));
	if (!wdev->wiphy)
		return -ENOMEM;
	wdev->iftype = NL80211_IFTYPE_STATION;
	wdev->wiphy->max_scan_ssids = 10;
	wdev->wiphy->interface_modes =
		BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &mwifiex_band_2ghz;
	wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &mwifiex_band_5ghz;

	/* Initialize cipher suits */
	wdev->wiphy->cipher_suites = mwifiex_cipher_suites;
	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites);

	/* Initialize parameters for 2GHz band */

	mwifiex_setup_ht_caps(&wdev->wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap,
									priv);
	mwifiex_setup_ht_caps(&wdev->wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap,
									priv);

	memcpy(wdev->wiphy->perm_addr, mac, 6);
	wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;

	/* We are using custom domains */
	wdev->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;

	wdev->wiphy->reg_notifier = mwifiex_reg_notifier;

	/* Set struct mwifiex_private pointer in wiphy_priv */
	wdev_priv = wiphy_priv(wdev->wiphy);

	*(unsigned long *) wdev_priv = (unsigned long) priv;

	ret = wiphy_register(wdev->wiphy);
	if (ret < 0) {
		dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
						__func__);
		wiphy_free(wdev->wiphy);
		return ret;
	} else {
		dev_dbg(priv->adapter->dev,
				"info: successfully registered wiphy device\n");
	}

	dev_net_set(dev, wiphy_net(wdev->wiphy));
	dev->ieee80211_ptr = wdev;
	memcpy(dev->dev_addr, wdev->wiphy->perm_addr, 6);
	memcpy(dev->perm_addr, wdev->wiphy->perm_addr, 6);
	SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy));
	priv->wdev = wdev;

	dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
	dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT;
	dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN;

	return ret;
}

/*
 * This function handles the result of different pending network operations.
 *
 * The following operations are handled and CFG802.11 subsystem is
 * notified accordingly -
 *      - Scan request completion
 *      - Association request completion
 *      - IBSS join request completion
 *      - Disconnect request completion
 */
void
mwifiex_cfg80211_results(struct work_struct *work)
{
	struct mwifiex_private *priv =
		container_of(work, struct mwifiex_private, cfg_workqueue);
	struct mwifiex_user_scan_cfg *scan_req;
	int ret = 0, i;
	struct ieee80211_channel *chan;

	if (priv->scan_request) {
		scan_req = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
				   GFP_KERNEL);
		if (!scan_req) {
			dev_err(priv->adapter->dev, "failed to alloc "
						    "scan_req\n");
			return;
		}
		for (i = 0; i < priv->scan_request->n_ssids; i++) {
			memcpy(scan_req->ssid_list[i].ssid,
					priv->scan_request->ssids[i].ssid,
					priv->scan_request->ssids[i].ssid_len);
			scan_req->ssid_list[i].max_len =
					priv->scan_request->ssids[i].ssid_len;
		}
		for (i = 0; i < priv->scan_request->n_channels; i++) {
			chan = priv->scan_request->channels[i];
			scan_req->chan_list[i].chan_number = chan->hw_value;
			scan_req->chan_list[i].radio_type = chan->band;
			if (chan->flags & IEEE80211_CHAN_DISABLED)
				scan_req->chan_list[i].scan_type =
					MWIFIEX_SCAN_TYPE_PASSIVE;
			else
				scan_req->chan_list[i].scan_type =
					MWIFIEX_SCAN_TYPE_ACTIVE;
			scan_req->chan_list[i].scan_time = 0;
		}
		if (mwifiex_set_user_scan_ioctl(priv, scan_req)) {
			ret = -EFAULT;
			goto done;
		}
		if (mwifiex_inform_bss_from_scan_result(priv, NULL))
			ret = -EFAULT;
done:
		priv->scan_result_status = ret;
		dev_dbg(priv->adapter->dev, "info: %s: sending scan results\n",
							__func__);
		cfg80211_scan_done(priv->scan_request,
				(priv->scan_result_status < 0));
		priv->scan_request = NULL;
		kfree(scan_req);
	}

	if (priv->assoc_request) {
		if (!priv->assoc_result) {
			cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
						NULL, 0, NULL, 0,
						WLAN_STATUS_SUCCESS,
						GFP_KERNEL);
			dev_dbg(priv->adapter->dev,
				"info: associated to bssid %pM successfully\n",
			       priv->cfg_bssid);
		} else {
			dev_dbg(priv->adapter->dev,
				"info: association to bssid %pM failed\n",
			       priv->cfg_bssid);
			memset(priv->cfg_bssid, 0, ETH_ALEN);
		}
		priv->assoc_request = 0;
		priv->assoc_result = 0;
	}

	if (priv->ibss_join_request) {
		if (!priv->ibss_join_result) {
			cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid,
					     GFP_KERNEL);
			dev_dbg(priv->adapter->dev,
				"info: joined/created adhoc network with bssid"
					" %pM successfully\n", priv->cfg_bssid);
		} else {
			dev_dbg(priv->adapter->dev,
				"info: failed creating/joining adhoc network\n");
		}
		priv->ibss_join_request = 0;
		priv->ibss_join_result = 0;
	}

	if (priv->disconnect) {
		memset(priv->cfg_bssid, 0, ETH_ALEN);
		priv->disconnect = 0;
	}

	return;
}