Dmitry Osipenko | 92eba68 | 2020-12-28 19:05:46 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Acer Iconia Tab A500 Embedded Controller Driver |
| 4 | * |
| 5 | * Copyright 2020 GRATE-driver project |
| 6 | */ |
| 7 | |
| 8 | #include <linux/delay.h> |
| 9 | #include <linux/i2c.h> |
| 10 | #include <linux/mfd/core.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/of_device.h> |
| 13 | #include <linux/reboot.h> |
| 14 | #include <linux/regmap.h> |
| 15 | |
| 16 | #define A500_EC_I2C_ERR_TIMEOUT 500 |
| 17 | #define A500_EC_POWER_CMD_TIMEOUT 1000 |
| 18 | |
| 19 | /* |
| 20 | * Controller's firmware expects specific command opcodes to be used for the |
| 21 | * corresponding registers. Unsupported commands are skipped by the firmware. |
| 22 | */ |
| 23 | #define CMD_SHUTDOWN 0x0 |
| 24 | #define CMD_WARM_REBOOT 0x0 |
| 25 | #define CMD_COLD_REBOOT 0x1 |
| 26 | |
| 27 | enum { |
| 28 | REG_CURRENT_NOW = 0x03, |
| 29 | REG_SHUTDOWN = 0x52, |
| 30 | REG_WARM_REBOOT = 0x54, |
| 31 | REG_COLD_REBOOT = 0x55, |
| 32 | }; |
| 33 | |
| 34 | static struct i2c_client *a500_ec_client_pm_off; |
| 35 | |
| 36 | static int a500_ec_read(void *context, const void *reg_buf, size_t reg_size, |
| 37 | void *val_buf, size_t val_sizel) |
| 38 | { |
| 39 | struct i2c_client *client = context; |
| 40 | unsigned int reg, retries = 5; |
| 41 | u16 *ret_val = val_buf; |
| 42 | s32 ret = 0; |
| 43 | |
| 44 | reg = *(u8 *)reg_buf; |
| 45 | |
| 46 | while (retries-- > 0) { |
| 47 | ret = i2c_smbus_read_word_data(client, reg); |
| 48 | if (ret >= 0) |
| 49 | break; |
| 50 | |
| 51 | msleep(A500_EC_I2C_ERR_TIMEOUT); |
| 52 | } |
| 53 | |
| 54 | if (ret < 0) { |
| 55 | dev_err(&client->dev, "read 0x%x failed: %d\n", reg, ret); |
| 56 | return ret; |
| 57 | } |
| 58 | |
| 59 | *ret_val = ret; |
| 60 | |
| 61 | if (reg == REG_CURRENT_NOW) |
| 62 | fsleep(10000); |
| 63 | |
| 64 | return 0; |
| 65 | } |
| 66 | |
| 67 | static int a500_ec_write(void *context, const void *data, size_t count) |
| 68 | { |
| 69 | struct i2c_client *client = context; |
| 70 | unsigned int reg, val, retries = 5; |
| 71 | s32 ret = 0; |
| 72 | |
| 73 | reg = *(u8 *)(data + 0); |
| 74 | val = *(u16 *)(data + 1); |
| 75 | |
| 76 | while (retries-- > 0) { |
| 77 | ret = i2c_smbus_write_word_data(client, reg, val); |
| 78 | if (ret >= 0) |
| 79 | break; |
| 80 | |
| 81 | msleep(A500_EC_I2C_ERR_TIMEOUT); |
| 82 | } |
| 83 | |
| 84 | if (ret < 0) { |
| 85 | dev_err(&client->dev, "write 0x%x failed: %d\n", reg, ret); |
| 86 | return ret; |
| 87 | } |
| 88 | |
| 89 | return 0; |
| 90 | } |
| 91 | |
| 92 | static const struct regmap_config a500_ec_regmap_config = { |
| 93 | .name = "KB930", |
| 94 | .reg_bits = 8, |
| 95 | .val_bits = 16, |
| 96 | .max_register = 0xff, |
| 97 | }; |
| 98 | |
| 99 | static const struct regmap_bus a500_ec_regmap_bus = { |
| 100 | .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, |
| 101 | .val_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| 102 | .write = a500_ec_write, |
| 103 | .read = a500_ec_read, |
| 104 | .max_raw_read = 2, |
| 105 | }; |
| 106 | |
| 107 | static void a500_ec_poweroff(void) |
| 108 | { |
| 109 | i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| 110 | REG_SHUTDOWN, CMD_SHUTDOWN); |
| 111 | |
| 112 | mdelay(A500_EC_POWER_CMD_TIMEOUT); |
| 113 | } |
| 114 | |
| 115 | static int a500_ec_restart_notify(struct notifier_block *this, |
| 116 | unsigned long reboot_mode, void *data) |
| 117 | { |
| 118 | if (reboot_mode == REBOOT_WARM) |
| 119 | i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| 120 | REG_WARM_REBOOT, CMD_WARM_REBOOT); |
| 121 | else |
| 122 | i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| 123 | REG_COLD_REBOOT, CMD_COLD_REBOOT); |
| 124 | |
| 125 | mdelay(A500_EC_POWER_CMD_TIMEOUT); |
| 126 | |
| 127 | return NOTIFY_DONE; |
| 128 | } |
| 129 | |
| 130 | static struct notifier_block a500_ec_restart_handler = { |
| 131 | .notifier_call = a500_ec_restart_notify, |
| 132 | .priority = 200, |
| 133 | }; |
| 134 | |
| 135 | static const struct mfd_cell a500_ec_cells[] = { |
| 136 | { .name = "acer-a500-iconia-battery", }, |
| 137 | { .name = "acer-a500-iconia-leds", }, |
| 138 | }; |
| 139 | |
| 140 | static int a500_ec_probe(struct i2c_client *client) |
| 141 | { |
| 142 | struct regmap *regmap; |
| 143 | int err; |
| 144 | |
| 145 | regmap = devm_regmap_init(&client->dev, &a500_ec_regmap_bus, |
| 146 | client, &a500_ec_regmap_config); |
| 147 | if (IS_ERR(regmap)) |
| 148 | return PTR_ERR(regmap); |
| 149 | |
| 150 | err = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, |
| 151 | a500_ec_cells, ARRAY_SIZE(a500_ec_cells), |
| 152 | NULL, 0, NULL); |
| 153 | if (err) { |
| 154 | dev_err(&client->dev, "failed to add sub-devices: %d\n", err); |
| 155 | return err; |
| 156 | } |
| 157 | |
| 158 | if (of_device_is_system_power_controller(client->dev.of_node)) { |
| 159 | a500_ec_client_pm_off = client; |
| 160 | |
| 161 | err = register_restart_handler(&a500_ec_restart_handler); |
| 162 | if (err) |
| 163 | return err; |
| 164 | |
| 165 | if (!pm_power_off) |
| 166 | pm_power_off = a500_ec_poweroff; |
| 167 | } |
| 168 | |
| 169 | return 0; |
| 170 | } |
| 171 | |
| 172 | static int a500_ec_remove(struct i2c_client *client) |
| 173 | { |
| 174 | if (of_device_is_system_power_controller(client->dev.of_node)) { |
| 175 | if (pm_power_off == a500_ec_poweroff) |
| 176 | pm_power_off = NULL; |
| 177 | |
| 178 | unregister_restart_handler(&a500_ec_restart_handler); |
| 179 | } |
| 180 | |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static const struct of_device_id a500_ec_match[] = { |
| 185 | { .compatible = "acer,a500-iconia-ec" }, |
| 186 | { } |
| 187 | }; |
| 188 | MODULE_DEVICE_TABLE(of, a500_ec_match); |
| 189 | |
| 190 | static struct i2c_driver a500_ec_driver = { |
| 191 | .driver = { |
| 192 | .name = "acer-a500-embedded-controller", |
| 193 | .of_match_table = a500_ec_match, |
| 194 | }, |
| 195 | .probe_new = a500_ec_probe, |
| 196 | .remove = a500_ec_remove, |
| 197 | }; |
| 198 | module_i2c_driver(a500_ec_driver); |
| 199 | |
| 200 | MODULE_DESCRIPTION("Acer Iconia Tab A500 Embedded Controller driver"); |
| 201 | MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>"); |
| 202 | MODULE_LICENSE("GPL"); |