Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 2 | /* |
| 3 | * Synaptics NavPoint (PXA27x SSP/SPI) driver. |
| 4 | * |
| 5 | * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <linux/kernel.h> |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 9 | #include <linux/module.h> |
| 10 | #include <linux/platform_device.h> |
| 11 | #include <linux/clk.h> |
| 12 | #include <linux/delay.h> |
| 13 | #include <linux/gpio.h> |
| 14 | #include <linux/input.h> |
| 15 | #include <linux/input/navpoint.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/mutex.h> |
| 18 | #include <linux/pxa2xx_ssp.h> |
| 19 | #include <linux/slab.h> |
| 20 | |
| 21 | /* |
| 22 | * Synaptics Modular Embedded Protocol: Module Packet Format. |
| 23 | * Module header byte 2:0 = Length (# bytes that follow) |
| 24 | * Module header byte 4:3 = Control |
| 25 | * Module header byte 7:5 = Module Address |
| 26 | */ |
| 27 | #define HEADER_LENGTH(byte) ((byte) & 0x07) |
| 28 | #define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) |
| 29 | #define HEADER_ADDRESS(byte) ((byte) >> 5) |
| 30 | |
| 31 | struct navpoint { |
| 32 | struct ssp_device *ssp; |
| 33 | struct input_dev *input; |
| 34 | struct device *dev; |
| 35 | int gpio; |
| 36 | int index; |
| 37 | u8 data[1 + HEADER_LENGTH(0xff)]; |
| 38 | }; |
| 39 | |
| 40 | /* |
| 41 | * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. |
| 42 | */ |
| 43 | static const u32 sscr0 = 0 |
| 44 | | SSCR0_TUM /* TIM = 1; No TUR interrupts */ |
| 45 | | SSCR0_RIM /* RIM = 1; No ROR interrupts */ |
| 46 | | SSCR0_SSE /* SSE = 1; SSP enabled */ |
| 47 | | SSCR0_Motorola /* FRF = 0; Motorola SPI */ |
| 48 | | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ |
| 49 | ; |
| 50 | static const u32 sscr1 = 0 |
| 51 | | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ |
| 52 | | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ |
| 53 | | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ |
| 54 | | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ |
| 55 | | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ |
| 56 | | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ |
| 57 | | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ |
| 58 | ; |
| 59 | static const u32 sssr = 0 |
| 60 | | SSSR_BCE /* BCE = 1; Clear BCE */ |
| 61 | | SSSR_TUR /* TUR = 1; Clear TUR */ |
| 62 | | SSSR_EOC /* EOC = 1; Clear EOC */ |
| 63 | | SSSR_TINT /* TINT = 1; Clear TINT */ |
| 64 | | SSSR_PINT /* PINT = 1; Clear PINT */ |
| 65 | | SSSR_ROR /* ROR = 1; Clear ROR */ |
| 66 | ; |
| 67 | |
| 68 | /* |
| 69 | * MEP Query $22: Touchpad Coordinate Range Query is not supported by |
| 70 | * the NavPoint module, so sampled values provide the default limits. |
| 71 | */ |
| 72 | #define NAVPOINT_X_MIN 1278 |
| 73 | #define NAVPOINT_X_MAX 5340 |
| 74 | #define NAVPOINT_Y_MIN 1572 |
| 75 | #define NAVPOINT_Y_MAX 4396 |
| 76 | #define NAVPOINT_PRESSURE_MIN 0 |
| 77 | #define NAVPOINT_PRESSURE_MAX 255 |
| 78 | |
| 79 | static void navpoint_packet(struct navpoint *navpoint) |
| 80 | { |
| 81 | int finger; |
| 82 | int gesture; |
| 83 | int x, y, z; |
| 84 | |
| 85 | switch (navpoint->data[0]) { |
| 86 | case 0xff: /* Garbage (packet?) between reset and Hello packet */ |
| 87 | case 0x00: /* Module 0, NULL packet */ |
| 88 | break; |
| 89 | |
| 90 | case 0x0e: /* Module 0, Absolute packet */ |
| 91 | finger = (navpoint->data[1] & 0x01); |
| 92 | gesture = (navpoint->data[1] & 0x02); |
| 93 | x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; |
| 94 | y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; |
| 95 | z = navpoint->data[6]; |
| 96 | input_report_key(navpoint->input, BTN_TOUCH, finger); |
| 97 | input_report_abs(navpoint->input, ABS_X, x); |
| 98 | input_report_abs(navpoint->input, ABS_Y, y); |
| 99 | input_report_abs(navpoint->input, ABS_PRESSURE, z); |
| 100 | input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); |
| 101 | input_report_key(navpoint->input, BTN_LEFT, gesture); |
| 102 | input_sync(navpoint->input); |
| 103 | break; |
| 104 | |
| 105 | case 0x19: /* Module 0, Hello packet */ |
| 106 | if ((navpoint->data[1] & 0xf0) == 0x10) |
| 107 | break; |
Gustavo A. R. Silva | 6f49c4f | 2020-07-07 11:24:55 -0700 | [diff] [blame] | 108 | fallthrough; |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 109 | default: |
| 110 | dev_warn(navpoint->dev, |
| 111 | "spurious packet: data=0x%02x,0x%02x,...\n", |
| 112 | navpoint->data[0], navpoint->data[1]); |
| 113 | break; |
| 114 | } |
| 115 | } |
| 116 | |
| 117 | static irqreturn_t navpoint_irq(int irq, void *dev_id) |
| 118 | { |
| 119 | struct navpoint *navpoint = dev_id; |
| 120 | struct ssp_device *ssp = navpoint->ssp; |
| 121 | irqreturn_t ret = IRQ_NONE; |
| 122 | u32 status; |
| 123 | |
| 124 | status = pxa_ssp_read_reg(ssp, SSSR); |
| 125 | if (status & sssr) { |
| 126 | dev_warn(navpoint->dev, |
| 127 | "unexpected interrupt: status=0x%08x\n", status); |
| 128 | pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); |
| 129 | ret = IRQ_HANDLED; |
| 130 | } |
| 131 | |
| 132 | while (status & SSSR_RNE) { |
| 133 | u32 data; |
| 134 | |
| 135 | data = pxa_ssp_read_reg(ssp, SSDR); |
| 136 | navpoint->data[navpoint->index + 0] = (data >> 8); |
| 137 | navpoint->data[navpoint->index + 1] = data; |
| 138 | navpoint->index += 2; |
| 139 | if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { |
| 140 | navpoint_packet(navpoint); |
| 141 | navpoint->index = 0; |
| 142 | } |
| 143 | status = pxa_ssp_read_reg(ssp, SSSR); |
| 144 | ret = IRQ_HANDLED; |
| 145 | } |
| 146 | |
| 147 | return ret; |
| 148 | } |
| 149 | |
| 150 | static void navpoint_up(struct navpoint *navpoint) |
| 151 | { |
| 152 | struct ssp_device *ssp = navpoint->ssp; |
| 153 | int timeout; |
| 154 | |
| 155 | clk_prepare_enable(ssp->clk); |
| 156 | |
| 157 | pxa_ssp_write_reg(ssp, SSCR1, sscr1); |
| 158 | pxa_ssp_write_reg(ssp, SSSR, sssr); |
| 159 | pxa_ssp_write_reg(ssp, SSTO, 0); |
| 160 | pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ |
| 161 | |
| 162 | /* Wait until SSP port is ready for slave clock operations */ |
| 163 | for (timeout = 100; timeout != 0; --timeout) { |
| 164 | if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) |
| 165 | break; |
| 166 | msleep(1); |
| 167 | } |
| 168 | |
| 169 | if (timeout == 0) |
| 170 | dev_err(navpoint->dev, |
| 171 | "timeout waiting for SSSR[CSS] to clear\n"); |
| 172 | |
| 173 | if (gpio_is_valid(navpoint->gpio)) |
| 174 | gpio_set_value(navpoint->gpio, 1); |
| 175 | } |
| 176 | |
| 177 | static void navpoint_down(struct navpoint *navpoint) |
| 178 | { |
| 179 | struct ssp_device *ssp = navpoint->ssp; |
| 180 | |
| 181 | if (gpio_is_valid(navpoint->gpio)) |
| 182 | gpio_set_value(navpoint->gpio, 0); |
| 183 | |
| 184 | pxa_ssp_write_reg(ssp, SSCR0, 0); |
| 185 | |
| 186 | clk_disable_unprepare(ssp->clk); |
| 187 | } |
| 188 | |
| 189 | static int navpoint_open(struct input_dev *input) |
| 190 | { |
| 191 | struct navpoint *navpoint = input_get_drvdata(input); |
| 192 | |
| 193 | navpoint_up(navpoint); |
| 194 | |
| 195 | return 0; |
| 196 | } |
| 197 | |
| 198 | static void navpoint_close(struct input_dev *input) |
| 199 | { |
| 200 | struct navpoint *navpoint = input_get_drvdata(input); |
| 201 | |
| 202 | navpoint_down(navpoint); |
| 203 | } |
| 204 | |
Bill Pemberton | 5298cc4 | 2012-11-23 21:38:25 -0800 | [diff] [blame] | 205 | static int navpoint_probe(struct platform_device *pdev) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 206 | { |
| 207 | const struct navpoint_platform_data *pdata = |
| 208 | dev_get_platdata(&pdev->dev); |
| 209 | struct ssp_device *ssp; |
| 210 | struct input_dev *input; |
| 211 | struct navpoint *navpoint; |
| 212 | int error; |
| 213 | |
| 214 | if (!pdata) { |
| 215 | dev_err(&pdev->dev, "no platform data\n"); |
| 216 | return -EINVAL; |
| 217 | } |
| 218 | |
| 219 | if (gpio_is_valid(pdata->gpio)) { |
| 220 | error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, |
| 221 | "SYNAPTICS_ON"); |
| 222 | if (error) |
| 223 | return error; |
| 224 | } |
| 225 | |
| 226 | ssp = pxa_ssp_request(pdata->port, pdev->name); |
| 227 | if (!ssp) { |
| 228 | error = -ENODEV; |
| 229 | goto err_free_gpio; |
| 230 | } |
| 231 | |
| 232 | /* HaRET does not disable devices before jumping into Linux */ |
| 233 | if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { |
| 234 | pxa_ssp_write_reg(ssp, SSCR0, 0); |
| 235 | dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); |
| 236 | } |
| 237 | |
| 238 | navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); |
| 239 | input = input_allocate_device(); |
| 240 | if (!navpoint || !input) { |
| 241 | error = -ENOMEM; |
| 242 | goto err_free_mem; |
| 243 | } |
| 244 | |
| 245 | navpoint->ssp = ssp; |
| 246 | navpoint->input = input; |
| 247 | navpoint->dev = &pdev->dev; |
| 248 | navpoint->gpio = pdata->gpio; |
| 249 | |
| 250 | input->name = pdev->name; |
| 251 | input->dev.parent = &pdev->dev; |
| 252 | |
| 253 | __set_bit(EV_KEY, input->evbit); |
| 254 | __set_bit(EV_ABS, input->evbit); |
| 255 | __set_bit(BTN_LEFT, input->keybit); |
| 256 | __set_bit(BTN_TOUCH, input->keybit); |
| 257 | __set_bit(BTN_TOOL_FINGER, input->keybit); |
| 258 | |
| 259 | input_set_abs_params(input, ABS_X, |
| 260 | NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); |
| 261 | input_set_abs_params(input, ABS_Y, |
| 262 | NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); |
| 263 | input_set_abs_params(input, ABS_PRESSURE, |
| 264 | NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, |
| 265 | 0, 0); |
| 266 | |
| 267 | input->open = navpoint_open; |
| 268 | input->close = navpoint_close; |
| 269 | |
| 270 | input_set_drvdata(input, navpoint); |
| 271 | |
| 272 | error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); |
| 273 | if (error) |
| 274 | goto err_free_mem; |
| 275 | |
| 276 | error = input_register_device(input); |
| 277 | if (error) |
| 278 | goto err_free_irq; |
| 279 | |
| 280 | platform_set_drvdata(pdev, navpoint); |
| 281 | dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); |
| 282 | |
| 283 | return 0; |
| 284 | |
| 285 | err_free_irq: |
Lars-Peter Clausen | 737f644 | 2013-05-23 09:30:23 -0700 | [diff] [blame] | 286 | free_irq(ssp->irq, navpoint); |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 287 | err_free_mem: |
| 288 | input_free_device(input); |
| 289 | kfree(navpoint); |
| 290 | pxa_ssp_free(ssp); |
| 291 | err_free_gpio: |
| 292 | if (gpio_is_valid(pdata->gpio)) |
| 293 | gpio_free(pdata->gpio); |
| 294 | |
| 295 | return error; |
| 296 | } |
| 297 | |
Bill Pemberton | e2619cf | 2012-11-23 21:50:47 -0800 | [diff] [blame] | 298 | static int navpoint_remove(struct platform_device *pdev) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 299 | { |
| 300 | const struct navpoint_platform_data *pdata = |
| 301 | dev_get_platdata(&pdev->dev); |
| 302 | struct navpoint *navpoint = platform_get_drvdata(pdev); |
| 303 | struct ssp_device *ssp = navpoint->ssp; |
| 304 | |
| 305 | free_irq(ssp->irq, navpoint); |
| 306 | |
| 307 | input_unregister_device(navpoint->input); |
| 308 | kfree(navpoint); |
| 309 | |
| 310 | pxa_ssp_free(ssp); |
| 311 | |
| 312 | if (gpio_is_valid(pdata->gpio)) |
| 313 | gpio_free(pdata->gpio); |
| 314 | |
| 315 | return 0; |
| 316 | } |
| 317 | |
Jingoo Han | 572081a | 2014-11-02 00:03:37 -0700 | [diff] [blame] | 318 | static int __maybe_unused navpoint_suspend(struct device *dev) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 319 | { |
| 320 | struct platform_device *pdev = to_platform_device(dev); |
| 321 | struct navpoint *navpoint = platform_get_drvdata(pdev); |
| 322 | struct input_dev *input = navpoint->input; |
| 323 | |
| 324 | mutex_lock(&input->mutex); |
Andrzej Pietrasiewicz | d69f0a4 | 2020-10-04 21:16:07 -0700 | [diff] [blame] | 325 | if (input_device_enabled(input)) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 326 | navpoint_down(navpoint); |
| 327 | mutex_unlock(&input->mutex); |
| 328 | |
| 329 | return 0; |
| 330 | } |
| 331 | |
Jingoo Han | 572081a | 2014-11-02 00:03:37 -0700 | [diff] [blame] | 332 | static int __maybe_unused navpoint_resume(struct device *dev) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 333 | { |
| 334 | struct platform_device *pdev = to_platform_device(dev); |
| 335 | struct navpoint *navpoint = platform_get_drvdata(pdev); |
| 336 | struct input_dev *input = navpoint->input; |
| 337 | |
| 338 | mutex_lock(&input->mutex); |
Andrzej Pietrasiewicz | d69f0a4 | 2020-10-04 21:16:07 -0700 | [diff] [blame] | 339 | if (input_device_enabled(input)) |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 340 | navpoint_up(navpoint); |
| 341 | mutex_unlock(&input->mutex); |
| 342 | |
| 343 | return 0; |
| 344 | } |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 345 | |
| 346 | static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume); |
| 347 | |
| 348 | static struct platform_driver navpoint_driver = { |
| 349 | .probe = navpoint_probe, |
Bill Pemberton | 1cb0aa8 | 2012-11-23 21:27:39 -0800 | [diff] [blame] | 350 | .remove = navpoint_remove, |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 351 | .driver = { |
| 352 | .name = "navpoint", |
Paul Parsons | ae99ea5 | 2012-05-10 22:11:51 -0700 | [diff] [blame] | 353 | .pm = &navpoint_pm_ops, |
| 354 | }, |
| 355 | }; |
| 356 | |
| 357 | module_platform_driver(navpoint_driver); |
| 358 | |
| 359 | MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); |
| 360 | MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); |
| 361 | MODULE_LICENSE("GPL"); |
| 362 | MODULE_ALIAS("platform:navpoint"); |