| David VomLehn | 51f1336 | 2010-08-02 11:44:00 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Locations of devices in the Gaia ASIC |
| 3 | * |
| 4 | * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 19 | * |
| 20 | * Author: David VomLehn |
| 21 | */ |
| 22 | |
| 23 | #include <linux/init.h> |
| 24 | #include <asm/mach-powertv/asic.h> |
| 25 | |
| 26 | const struct register_map gaia_register_map __initdata = { |
| 27 | .eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000}, |
| 28 | .eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038}, |
| 29 | .eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C}, |
| 30 | |
| 31 | .chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800}, |
| 32 | .chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804}, |
| 33 | .chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808}, |
| 34 | .chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C}, |
| 35 | |
| 36 | /* The registers of IRBlaster */ |
| 37 | .uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800}, |
| 38 | .uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804}, |
| 39 | .uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808}, |
| 40 | .uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C}, |
| 41 | .uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810}, |
| 42 | .uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814}, |
| 43 | .uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818}, |
| 44 | .uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C}, |
| 45 | |
| 46 | .int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800}, |
| 47 | .int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804}, |
| 48 | .int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808}, |
| 49 | .int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C}, |
| 50 | .int_config = {.phys = GAIA_IO_BASE + 0x2A2810}, |
| 51 | .int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818}, |
| 52 | .ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830}, |
| 53 | .ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834}, |
| 54 | .ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838}, |
| 55 | .ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C}, |
| 56 | .int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880}, |
| 57 | .int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884}, |
| 58 | .int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888}, |
| 59 | .int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C}, |
| 60 | .int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890}, |
| 61 | .int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894}, |
| 62 | .int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898}, |
| 63 | .int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C}, |
| 64 | .int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0}, |
| 65 | .int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4}, |
| 66 | .int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8}, |
| 67 | .int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC}, |
| 68 | .int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0}, |
| 69 | .int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4}, |
| 70 | .int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8}, |
| 71 | .int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC}, |
| 72 | .int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4}, |
| 73 | |
| 74 | .mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000}, |
| 75 | .fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024}, |
| 76 | .test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC}, |
| 77 | .crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108}, |
| 78 | .usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C}, |
| 79 | .usb2_strap = {.phys = GAIA_IO_BASE + 0x200014}, |
| 80 | .ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00}, |
| 81 | .ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00}, |
| 82 | .bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004}, |
| 83 | .usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C}, |
| 84 | .usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00}, |
| 85 | .usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04}, |
| 86 | .usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08}, |
| 87 | |
| 88 | .pcie_regs = {.phys = GAIA_IO_BASE + 0x220000}, |
| 89 | .tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10}, |
| 90 | .tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14}, |
| 91 | .gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20}, |
| 92 | .gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24}, |
| 93 | .gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C}, |
| 94 | .watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30}, |
| 95 | .front_panel = {.phys = GAIA_IO_BASE + 0x2A3800}, |
| 96 | }; |