Thomas Gleixner | 1a59d1b8 | 2019-05-27 08:55:05 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 2 | /* |
| 3 | * MAX8997-haptic controller driver |
| 4 | * |
| 5 | * Copyright (C) 2012 Samsung Electronics |
| 6 | * Donggeun Kim <dg77.kim@samsung.com> |
| 7 | * |
| 8 | * This program is not provided / owned by Maxim Integrated Products. |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <linux/module.h> |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 12 | #include <linux/slab.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/pwm.h> |
| 16 | #include <linux/input.h> |
| 17 | #include <linux/mfd/max8997-private.h> |
| 18 | #include <linux/mfd/max8997.h> |
| 19 | #include <linux/regulator/consumer.h> |
| 20 | |
| 21 | /* Haptic configuration 2 register */ |
| 22 | #define MAX8997_MOTOR_TYPE_SHIFT 7 |
| 23 | #define MAX8997_ENABLE_SHIFT 6 |
| 24 | #define MAX8997_MODE_SHIFT 5 |
| 25 | |
| 26 | /* Haptic driver configuration register */ |
| 27 | #define MAX8997_CYCLE_SHIFT 6 |
| 28 | #define MAX8997_SIG_PERIOD_SHIFT 4 |
| 29 | #define MAX8997_SIG_DUTY_SHIFT 2 |
| 30 | #define MAX8997_PWM_DUTY_SHIFT 0 |
| 31 | |
| 32 | struct max8997_haptic { |
| 33 | struct device *dev; |
| 34 | struct i2c_client *client; |
| 35 | struct input_dev *input_dev; |
| 36 | struct regulator *regulator; |
| 37 | |
| 38 | struct work_struct work; |
| 39 | struct mutex mutex; |
| 40 | |
| 41 | bool enabled; |
| 42 | unsigned int level; |
| 43 | |
| 44 | struct pwm_device *pwm; |
| 45 | unsigned int pwm_period; |
| 46 | enum max8997_haptic_pwm_divisor pwm_divisor; |
| 47 | |
| 48 | enum max8997_haptic_motor_type type; |
| 49 | enum max8997_haptic_pulse_mode mode; |
| 50 | |
| 51 | unsigned int internal_mode_pattern; |
| 52 | unsigned int pattern_cycle; |
| 53 | unsigned int pattern_signal_period; |
| 54 | }; |
| 55 | |
| 56 | static int max8997_haptic_set_duty_cycle(struct max8997_haptic *chip) |
| 57 | { |
| 58 | int ret = 0; |
| 59 | |
| 60 | if (chip->mode == MAX8997_EXTERNAL_MODE) { |
| 61 | unsigned int duty = chip->pwm_period * chip->level / 100; |
| 62 | ret = pwm_config(chip->pwm, duty, chip->pwm_period); |
| 63 | } else { |
| 64 | int i; |
| 65 | u8 duty_index = 0; |
| 66 | |
| 67 | for (i = 0; i <= 64; i++) { |
| 68 | if (chip->level <= i * 100 / 64) { |
| 69 | duty_index = i; |
| 70 | break; |
| 71 | } |
| 72 | } |
| 73 | switch (chip->internal_mode_pattern) { |
| 74 | case 0: |
| 75 | max8997_write_reg(chip->client, |
| 76 | MAX8997_HAPTIC_REG_SIGPWMDC1, duty_index); |
| 77 | break; |
| 78 | case 1: |
| 79 | max8997_write_reg(chip->client, |
| 80 | MAX8997_HAPTIC_REG_SIGPWMDC2, duty_index); |
| 81 | break; |
| 82 | case 2: |
| 83 | max8997_write_reg(chip->client, |
| 84 | MAX8997_HAPTIC_REG_SIGPWMDC3, duty_index); |
| 85 | break; |
| 86 | case 3: |
| 87 | max8997_write_reg(chip->client, |
| 88 | MAX8997_HAPTIC_REG_SIGPWMDC4, duty_index); |
| 89 | break; |
| 90 | default: |
| 91 | break; |
| 92 | } |
| 93 | } |
| 94 | return ret; |
| 95 | } |
| 96 | |
| 97 | static void max8997_haptic_configure(struct max8997_haptic *chip) |
| 98 | { |
| 99 | u8 value; |
| 100 | |
| 101 | value = chip->type << MAX8997_MOTOR_TYPE_SHIFT | |
| 102 | chip->enabled << MAX8997_ENABLE_SHIFT | |
| 103 | chip->mode << MAX8997_MODE_SHIFT | chip->pwm_divisor; |
| 104 | max8997_write_reg(chip->client, MAX8997_HAPTIC_REG_CONF2, value); |
| 105 | |
| 106 | if (chip->mode == MAX8997_INTERNAL_MODE && chip->enabled) { |
| 107 | value = chip->internal_mode_pattern << MAX8997_CYCLE_SHIFT | |
| 108 | chip->internal_mode_pattern << MAX8997_SIG_PERIOD_SHIFT | |
| 109 | chip->internal_mode_pattern << MAX8997_SIG_DUTY_SHIFT | |
| 110 | chip->internal_mode_pattern << MAX8997_PWM_DUTY_SHIFT; |
| 111 | max8997_write_reg(chip->client, |
| 112 | MAX8997_HAPTIC_REG_DRVCONF, value); |
| 113 | |
| 114 | switch (chip->internal_mode_pattern) { |
| 115 | case 0: |
| 116 | value = chip->pattern_cycle << 4; |
| 117 | max8997_write_reg(chip->client, |
| 118 | MAX8997_HAPTIC_REG_CYCLECONF1, value); |
| 119 | value = chip->pattern_signal_period; |
| 120 | max8997_write_reg(chip->client, |
| 121 | MAX8997_HAPTIC_REG_SIGCONF1, value); |
| 122 | break; |
| 123 | |
| 124 | case 1: |
| 125 | value = chip->pattern_cycle; |
| 126 | max8997_write_reg(chip->client, |
| 127 | MAX8997_HAPTIC_REG_CYCLECONF1, value); |
| 128 | value = chip->pattern_signal_period; |
| 129 | max8997_write_reg(chip->client, |
| 130 | MAX8997_HAPTIC_REG_SIGCONF2, value); |
| 131 | break; |
| 132 | |
| 133 | case 2: |
| 134 | value = chip->pattern_cycle << 4; |
| 135 | max8997_write_reg(chip->client, |
| 136 | MAX8997_HAPTIC_REG_CYCLECONF2, value); |
| 137 | value = chip->pattern_signal_period; |
| 138 | max8997_write_reg(chip->client, |
| 139 | MAX8997_HAPTIC_REG_SIGCONF3, value); |
| 140 | break; |
| 141 | |
| 142 | case 3: |
| 143 | value = chip->pattern_cycle; |
| 144 | max8997_write_reg(chip->client, |
| 145 | MAX8997_HAPTIC_REG_CYCLECONF2, value); |
| 146 | value = chip->pattern_signal_period; |
| 147 | max8997_write_reg(chip->client, |
| 148 | MAX8997_HAPTIC_REG_SIGCONF4, value); |
| 149 | break; |
| 150 | |
| 151 | default: |
| 152 | break; |
| 153 | } |
| 154 | } |
| 155 | } |
| 156 | |
| 157 | static void max8997_haptic_enable(struct max8997_haptic *chip) |
| 158 | { |
| 159 | int error; |
| 160 | |
| 161 | mutex_lock(&chip->mutex); |
| 162 | |
| 163 | error = max8997_haptic_set_duty_cycle(chip); |
| 164 | if (error) { |
| 165 | dev_err(chip->dev, "set_pwm_cycle failed, error: %d\n", error); |
| 166 | goto out; |
| 167 | } |
| 168 | |
| 169 | if (!chip->enabled) { |
Sachin Kamat | b1bc303 | 2014-06-07 23:10:25 -0700 | [diff] [blame] | 170 | error = regulator_enable(chip->regulator); |
| 171 | if (error) { |
| 172 | dev_err(chip->dev, "Failed to enable regulator\n"); |
| 173 | goto out; |
| 174 | } |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 175 | max8997_haptic_configure(chip); |
Sachin Kamat | b1bc303 | 2014-06-07 23:10:25 -0700 | [diff] [blame] | 176 | if (chip->mode == MAX8997_EXTERNAL_MODE) { |
| 177 | error = pwm_enable(chip->pwm); |
| 178 | if (error) { |
| 179 | dev_err(chip->dev, "Failed to enable PWM\n"); |
| 180 | regulator_disable(chip->regulator); |
| 181 | goto out; |
| 182 | } |
| 183 | } |
| 184 | chip->enabled = true; |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 185 | } |
| 186 | |
| 187 | out: |
| 188 | mutex_unlock(&chip->mutex); |
| 189 | } |
| 190 | |
| 191 | static void max8997_haptic_disable(struct max8997_haptic *chip) |
| 192 | { |
| 193 | mutex_lock(&chip->mutex); |
| 194 | |
| 195 | if (chip->enabled) { |
| 196 | chip->enabled = false; |
| 197 | max8997_haptic_configure(chip); |
| 198 | if (chip->mode == MAX8997_EXTERNAL_MODE) |
| 199 | pwm_disable(chip->pwm); |
| 200 | regulator_disable(chip->regulator); |
| 201 | } |
| 202 | |
| 203 | mutex_unlock(&chip->mutex); |
| 204 | } |
| 205 | |
| 206 | static void max8997_haptic_play_effect_work(struct work_struct *work) |
| 207 | { |
| 208 | struct max8997_haptic *chip = |
| 209 | container_of(work, struct max8997_haptic, work); |
| 210 | |
| 211 | if (chip->level) |
| 212 | max8997_haptic_enable(chip); |
| 213 | else |
| 214 | max8997_haptic_disable(chip); |
| 215 | } |
| 216 | |
| 217 | static int max8997_haptic_play_effect(struct input_dev *dev, void *data, |
| 218 | struct ff_effect *effect) |
| 219 | { |
| 220 | struct max8997_haptic *chip = input_get_drvdata(dev); |
| 221 | |
| 222 | chip->level = effect->u.rumble.strong_magnitude; |
| 223 | if (!chip->level) |
| 224 | chip->level = effect->u.rumble.weak_magnitude; |
| 225 | |
| 226 | schedule_work(&chip->work); |
| 227 | |
| 228 | return 0; |
| 229 | } |
| 230 | |
| 231 | static void max8997_haptic_close(struct input_dev *dev) |
| 232 | { |
| 233 | struct max8997_haptic *chip = input_get_drvdata(dev); |
| 234 | |
| 235 | cancel_work_sync(&chip->work); |
| 236 | max8997_haptic_disable(chip); |
| 237 | } |
| 238 | |
Bill Pemberton | 5298cc4 | 2012-11-23 21:38:25 -0800 | [diff] [blame] | 239 | static int max8997_haptic_probe(struct platform_device *pdev) |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 240 | { |
| 241 | struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| 242 | const struct max8997_platform_data *pdata = |
| 243 | dev_get_platdata(iodev->dev); |
Marek Szyprowski | 6ae645d | 2016-05-09 09:31:47 -0700 | [diff] [blame] | 244 | const struct max8997_haptic_platform_data *haptic_pdata = NULL; |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 245 | struct max8997_haptic *chip; |
| 246 | struct input_dev *input_dev; |
| 247 | int error; |
| 248 | |
Marek Szyprowski | 6ae645d | 2016-05-09 09:31:47 -0700 | [diff] [blame] | 249 | if (pdata) |
| 250 | haptic_pdata = pdata->haptic_pdata; |
| 251 | |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 252 | if (!haptic_pdata) { |
| 253 | dev_err(&pdev->dev, "no haptic platform data\n"); |
| 254 | return -EINVAL; |
| 255 | } |
| 256 | |
| 257 | chip = kzalloc(sizeof(struct max8997_haptic), GFP_KERNEL); |
| 258 | input_dev = input_allocate_device(); |
| 259 | if (!chip || !input_dev) { |
| 260 | dev_err(&pdev->dev, "unable to allocate memory\n"); |
| 261 | error = -ENOMEM; |
| 262 | goto err_free_mem; |
| 263 | } |
| 264 | |
| 265 | INIT_WORK(&chip->work, max8997_haptic_play_effect_work); |
| 266 | mutex_init(&chip->mutex); |
| 267 | |
| 268 | chip->client = iodev->haptic; |
| 269 | chip->dev = &pdev->dev; |
| 270 | chip->input_dev = input_dev; |
| 271 | chip->pwm_period = haptic_pdata->pwm_period; |
| 272 | chip->type = haptic_pdata->type; |
| 273 | chip->mode = haptic_pdata->mode; |
| 274 | chip->pwm_divisor = haptic_pdata->pwm_divisor; |
| 275 | |
| 276 | switch (chip->mode) { |
| 277 | case MAX8997_INTERNAL_MODE: |
| 278 | chip->internal_mode_pattern = |
| 279 | haptic_pdata->internal_mode_pattern; |
| 280 | chip->pattern_cycle = haptic_pdata->pattern_cycle; |
| 281 | chip->pattern_signal_period = |
| 282 | haptic_pdata->pattern_signal_period; |
| 283 | break; |
| 284 | |
| 285 | case MAX8997_EXTERNAL_MODE: |
| 286 | chip->pwm = pwm_request(haptic_pdata->pwm_channel_id, |
| 287 | "max8997-haptic"); |
| 288 | if (IS_ERR(chip->pwm)) { |
| 289 | error = PTR_ERR(chip->pwm); |
| 290 | dev_err(&pdev->dev, |
| 291 | "unable to request PWM for haptic, error: %d\n", |
| 292 | error); |
| 293 | goto err_free_mem; |
| 294 | } |
Boris Brezillon | de93170 | 2016-04-14 21:17:33 +0200 | [diff] [blame] | 295 | |
| 296 | /* |
| 297 | * FIXME: pwm_apply_args() should be removed when switching to |
| 298 | * the atomic PWM API. |
| 299 | */ |
| 300 | pwm_apply_args(chip->pwm); |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 301 | break; |
| 302 | |
| 303 | default: |
| 304 | dev_err(&pdev->dev, |
| 305 | "Invalid chip mode specified (%d)\n", chip->mode); |
| 306 | error = -EINVAL; |
| 307 | goto err_free_mem; |
| 308 | } |
| 309 | |
| 310 | chip->regulator = regulator_get(&pdev->dev, "inmotor"); |
| 311 | if (IS_ERR(chip->regulator)) { |
| 312 | error = PTR_ERR(chip->regulator); |
| 313 | dev_err(&pdev->dev, |
| 314 | "unable to get regulator, error: %d\n", |
| 315 | error); |
| 316 | goto err_free_pwm; |
| 317 | } |
| 318 | |
| 319 | input_dev->name = "max8997-haptic"; |
| 320 | input_dev->id.version = 1; |
| 321 | input_dev->dev.parent = &pdev->dev; |
| 322 | input_dev->close = max8997_haptic_close; |
| 323 | input_set_drvdata(input_dev, chip); |
| 324 | input_set_capability(input_dev, EV_FF, FF_RUMBLE); |
| 325 | |
| 326 | error = input_ff_create_memless(input_dev, NULL, |
| 327 | max8997_haptic_play_effect); |
| 328 | if (error) { |
| 329 | dev_err(&pdev->dev, |
| 330 | "unable to create FF device, error: %d\n", |
| 331 | error); |
| 332 | goto err_put_regulator; |
| 333 | } |
| 334 | |
| 335 | error = input_register_device(input_dev); |
| 336 | if (error) { |
| 337 | dev_err(&pdev->dev, |
| 338 | "unable to register input device, error: %d\n", |
| 339 | error); |
| 340 | goto err_destroy_ff; |
| 341 | } |
| 342 | |
| 343 | platform_set_drvdata(pdev, chip); |
| 344 | return 0; |
| 345 | |
| 346 | err_destroy_ff: |
| 347 | input_ff_destroy(input_dev); |
| 348 | err_put_regulator: |
| 349 | regulator_put(chip->regulator); |
| 350 | err_free_pwm: |
| 351 | if (chip->mode == MAX8997_EXTERNAL_MODE) |
| 352 | pwm_free(chip->pwm); |
| 353 | err_free_mem: |
| 354 | input_free_device(input_dev); |
| 355 | kfree(chip); |
| 356 | |
| 357 | return error; |
| 358 | } |
| 359 | |
Bill Pemberton | e2619cf | 2012-11-23 21:50:47 -0800 | [diff] [blame] | 360 | static int max8997_haptic_remove(struct platform_device *pdev) |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 361 | { |
| 362 | struct max8997_haptic *chip = platform_get_drvdata(pdev); |
| 363 | |
| 364 | input_unregister_device(chip->input_dev); |
| 365 | regulator_put(chip->regulator); |
| 366 | |
| 367 | if (chip->mode == MAX8997_EXTERNAL_MODE) |
| 368 | pwm_free(chip->pwm); |
| 369 | |
| 370 | kfree(chip); |
| 371 | |
| 372 | return 0; |
| 373 | } |
| 374 | |
Jingoo Han | 97a652a | 2014-11-02 00:02:46 -0700 | [diff] [blame] | 375 | static int __maybe_unused max8997_haptic_suspend(struct device *dev) |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 376 | { |
| 377 | struct platform_device *pdev = to_platform_device(dev); |
| 378 | struct max8997_haptic *chip = platform_get_drvdata(pdev); |
| 379 | |
| 380 | max8997_haptic_disable(chip); |
| 381 | |
| 382 | return 0; |
| 383 | } |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 384 | |
| 385 | static SIMPLE_DEV_PM_OPS(max8997_haptic_pm_ops, max8997_haptic_suspend, NULL); |
| 386 | |
| 387 | static const struct platform_device_id max8997_haptic_id[] = { |
| 388 | { "max8997-haptic", 0 }, |
| 389 | { }, |
| 390 | }; |
Javier Martinez Canillas | d6f5aef | 2015-08-28 17:30:46 -0700 | [diff] [blame] | 391 | MODULE_DEVICE_TABLE(platform, max8997_haptic_id); |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 392 | |
| 393 | static struct platform_driver max8997_haptic_driver = { |
| 394 | .driver = { |
| 395 | .name = "max8997-haptic", |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 396 | .pm = &max8997_haptic_pm_ops, |
| 397 | }, |
| 398 | .probe = max8997_haptic_probe, |
Bill Pemberton | 1cb0aa8 | 2012-11-23 21:27:39 -0800 | [diff] [blame] | 399 | .remove = max8997_haptic_remove, |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 400 | .id_table = max8997_haptic_id, |
| 401 | }; |
| 402 | module_platform_driver(max8997_haptic_driver); |
| 403 | |
Donggeun Kim | 104594b0 | 2012-03-16 12:28:22 -0700 | [diff] [blame] | 404 | MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| 405 | MODULE_DESCRIPTION("max8997_haptic driver"); |
| 406 | MODULE_LICENSE("GPL"); |