arch/arm/boot/dts/ls1021a.dtsi

/*
 * Copyright 2013-2014 Freescale Semiconductor, Inc.
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of
 *     the License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	compatible = "fsl,ls1021a";
	interrupt-parent = <&gic>;

	aliases {
		crypto = &crypto;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		serial0 = &lpuart0;
		serial1 = &lpuart1;
		serial2 = &lpuart2;
		serial3 = &lpuart3;
		serial4 = &lpuart4;
		serial5 = &lpuart5;
		sysclk = &sysclk;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@f00 {
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			reg = <0xf00>;
			clocks = <&clockgen 1 0>;
			#cooling-cells = <2>;
		};

		cpu1: cpu@f01 {
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			reg = <0xf01>;
			clocks = <&clockgen 1 0>;
			#cooling-cells = <2>;
		};
	};

	sysclk: sysclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <100000000>;
		clock-output-names = "sysclk";
	};

	timer {
		compatible = "arm,armv7-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
	};

	pmu {
		compatible = "arm,cortex-a7-pmu";
		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>;
	};

	reboot {
		compatible = "syscon-reboot";
		regmap = <&dcfg>;
		offset = <0xb0>;
		mask = <0x02>;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		device_type = "soc";
		interrupt-parent = <&gic>;
		ranges;

		gic: interrupt-controller@1400000 {
			compatible = "arm,gic-400", "arm,cortex-a7-gic";
			#interrupt-cells = <3>;
			interrupt-controller;
			reg = <0x0 0x1401000 0x0 0x1000>,
			      <0x0 0x1402000 0x0 0x2000>,
			      <0x0 0x1404000 0x0 0x2000>,
			      <0x0 0x1406000 0x0 0x2000>;
			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;

		};

		msi1: msi-controller@1570e00 {
			compatible = "fsl,ls1021a-msi";
			reg = <0x0 0x1570e00 0x0 0x8>;
			msi-controller;
			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
		};

		msi2: msi-controller@1570e08 {
			compatible = "fsl,ls1021a-msi";
			reg = <0x0 0x1570e08 0x0 0x8>;
			msi-controller;
			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
		};

		ifc: ifc@1530000 {
			compatible = "fsl,ifc", "simple-bus";
			reg = <0x0 0x1530000 0x0 0x10000>;
			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
		};

		dcfg: dcfg@1ee0000 {
			compatible = "fsl,ls1021a-dcfg", "syscon";
			reg = <0x0 0x1ee0000 0x0 0x10000>;
			big-endian;
		};

		qspi: quadspi@1550000 {
			compatible = "fsl,ls1021a-qspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x1550000 0x0 0x10000>,
			      <0x0 0x40000000 0x0 0x40000000>;
			reg-names = "QuadSPI", "QuadSPI-memory";
			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "qspi_en", "qspi";
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			big-endian;
			status = "disabled";
		};

		esdhc: esdhc@1560000 {
			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
			reg = <0x0 0x1560000 0x0 0x10000>;
			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
			clock-frequency = <0>;
			voltage-ranges = <1800 1800 3300 3300>;
			sdhci,auto-cmd12;
			big-endian;
			bus-width = <4>;
			status = "disabled";
		};

		sata: sata@3200000 {
			compatible = "fsl,ls1021a-ahci";
			reg = <0x0 0x3200000 0x0 0x10000>,
			      <0x0 0x20220520 0x0 0x4>;
			reg-names = "ahci", "sata-ecc";
			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			dma-coherent;
			status = "disabled";
		};

		scfg: scfg@1570000 {
			compatible = "fsl,ls1021a-scfg", "syscon";
			reg = <0x0 0x1570000 0x0 0x10000>;
			big-endian;
		};

		crypto: crypto@1700000 {
			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
			fsl,sec-era = <7>;
			#address-cells = <1>;
			#size-cells = <1>;
			reg		 = <0x0 0x1700000 0x0 0x100000>;
			ranges		 = <0x0 0x0 0x1700000 0x100000>;
			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;

			sec_jr0: jr@10000 {
				compatible = "fsl,sec-v5.0-job-ring",
				     "fsl,sec-v4.0-job-ring";
				reg = <0x10000 0x10000>;
				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr1: jr@20000 {
				compatible = "fsl,sec-v5.0-job-ring",
				     "fsl,sec-v4.0-job-ring";
				reg = <0x20000 0x10000>;
				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr2: jr@30000 {
				compatible = "fsl,sec-v5.0-job-ring",
				     "fsl,sec-v4.0-job-ring";
				reg = <0x30000 0x10000>;
				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr3: jr@40000 {
				compatible = "fsl,sec-v5.0-job-ring",
				     "fsl,sec-v4.0-job-ring";
				reg = <0x40000 0x10000>;
				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
			};

		};

		clockgen: clocking@1ee1000 {
			compatible = "fsl,ls1021a-clockgen";
			reg = <0x0 0x1ee1000 0x0 0x1000>;
			#clock-cells = <2>;
			clocks = <&sysclk>;
		};

		tmu: tmu@1f00000 {
			compatible = "fsl,qoriq-tmu";
			reg = <0x0 0x1f00000 0x0 0x10000>;
			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
			fsl,tmu-calibration = <0x00000000 0x0000000f
					       0x00000001 0x00000017
					       0x00000002 0x0000001e
					       0x00000003 0x00000026
					       0x00000004 0x0000002e
					       0x00000005 0x00000035
					       0x00000006 0x0000003d
					       0x00000007 0x00000044
					       0x00000008 0x0000004c
					       0x00000009 0x00000053
					       0x0000000a 0x0000005b
					       0x0000000b 0x00000064

					       0x00010000 0x00000011
					       0x00010001 0x0000001c
					       0x00010002 0x00000024
					       0x00010003 0x0000002b
					       0x00010004 0x00000034
					       0x00010005 0x00000039
					       0x00010006 0x00000042
					       0x00010007 0x0000004c
					       0x00010008 0x00000051
					       0x00010009 0x0000005a
					       0x0001000a 0x00000063

					       0x00020000 0x00000013
					       0x00020001 0x00000019
					       0x00020002 0x00000024
					       0x00020003 0x0000002c
					       0x00020004 0x00000035
					       0x00020005 0x0000003d
					       0x00020006 0x00000046
					       0x00020007 0x00000050
					       0x00020008 0x00000059

					       0x00030000 0x00000002
					       0x00030001 0x0000000d
					       0x00030002 0x00000019
					       0x00030003 0x00000024>;
			#thermal-sensor-cells = <1>;
		};

		thermal-zones {
			cpu_thermal: cpu-thermal {
				polling-delay-passive = <1000>;
				polling-delay = <5000>;

				thermal-sensors = <&tmu 0>;

				trips {
					cpu_alert: cpu-alert {
						temperature = <85000>;
						hysteresis = <2000>;
						type = "passive";
					};
					cpu_crit: cpu-crit {
						temperature = <95000>;
						hysteresis = <2000>;
						type = "critical";
					};
				};

				cooling-maps {
					map0 {
						trip = <&cpu_alert>;
						cooling-device =
							<&cpu0 THERMAL_NO_LIMIT
							THERMAL_NO_LIMIT>;
					};
				};
			};
		};

		dspi0: dspi@2100000 {
			compatible = "fsl,ls1021a-v1.0-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2100000 0x0 0x10000>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "dspi";
			clocks = <&clockgen 4 1>;
			spi-num-chipselects = <6>;
			big-endian;
			status = "disabled";
		};

		dspi1: dspi@2110000 {
			compatible = "fsl,ls1021a-v1.0-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2110000 0x0 0x10000>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "dspi";
			clocks = <&clockgen 4 1>;
			spi-num-chipselects = <6>;
			big-endian;
			status = "disabled";
		};

		i2c0: i2c@2180000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2180000 0x0 0x10000>;
			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "i2c";
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		i2c1: i2c@2190000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2190000 0x0 0x10000>;
			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "i2c";
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		i2c2: i2c@21a0000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x21a0000 0x0 0x10000>;
			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "i2c";
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		uart0: serial@21c0500 {
			compatible = "fsl,16550-FIFO64", "ns16550a";
			reg = <0x0 0x21c0500 0x0 0x100>;
			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			clock-frequency = <0>;
			fifo-size = <15>;
			status = "disabled";
		};

		uart1: serial@21c0600 {
			compatible = "fsl,16550-FIFO64", "ns16550a";
			reg = <0x0 0x21c0600 0x0 0x100>;
			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			clock-frequency = <0>;
			fifo-size = <15>;
			status = "disabled";
		};

		uart2: serial@21d0500 {
			compatible = "fsl,16550-FIFO64", "ns16550a";
			reg = <0x0 0x21d0500 0x0 0x100>;
			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
			clock-frequency = <0>;
			fifo-size = <15>;
			status = "disabled";
		};

		uart3: serial@21d0600 {
			compatible = "fsl,16550-FIFO64", "ns16550a";
			reg = <0x0 0x21d0600 0x0 0x100>;
			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
			clock-frequency = <0>;
			fifo-size = <15>;
			status = "disabled";
		};

		gpio0: gpio@2300000 {
			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2300000 0x0 0x10000>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio1: gpio@2310000 {
			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2310000 0x0 0x10000>;
			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio@2320000 {
			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2320000 0x0 0x10000>;
			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio@2330000 {
			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2330000 0x0 0x10000>;
			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		lpuart0: serial@2950000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2950000 0x0 0x1000>;
			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&sysclk>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart1: serial@2960000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2960000 0x0 0x1000>;
			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart2: serial@2970000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2970000 0x0 0x1000>;
			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart3: serial@2980000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2980000 0x0 0x1000>;
			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart4: serial@2990000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2990000 0x0 0x1000>;
			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart5: serial@29a0000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x29a0000 0x0 0x1000>;
			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		wdog0: watchdog@2ad0000 {
			compatible = "fsl,imx21-wdt";
			reg = <0x0 0x2ad0000 0x0 0x10000>;
			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "wdog-en";
			big-endian;
		};

		sai1: sai@2b50000 {
			#sound-dai-cells = <0>;
			compatible = "fsl,vf610-sai";
			reg = <0x0 0x2b50000 0x0 0x10000>;
			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
				 <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "bus", "mclk1", "mclk2", "mclk3";
			dma-names = "tx", "rx";
			dmas = <&edma0 1 47>,
			       <&edma0 1 46>;
			status = "disabled";
		};

		sai2: sai@2b60000 {
			#sound-dai-cells = <0>;
			compatible = "fsl,vf610-sai";
			reg = <0x0 0x2b60000 0x0 0x10000>;
			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
				 <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "bus", "mclk1", "mclk2", "mclk3";
			dma-names = "tx", "rx";
			dmas = <&edma0 1 45>,
			       <&edma0 1 44>;
			status = "disabled";
		};

		edma0: edma@2c00000 {
			#dma-cells = <2>;
			compatible = "fsl,vf610-edma";
			reg = <0x0 0x2c00000 0x0 0x10000>,
			      <0x0 0x2c10000 0x0 0x10000>,
			      <0x0 0x2c20000 0x0 0x10000>;
			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "edma-tx", "edma-err";
			dma-channels = <32>;
			big-endian;
			clock-names = "dmamux0", "dmamux1";
			clocks = <&clockgen 4 1>,
				 <&clockgen 4 1>;
		};

		dcu: dcu@2ce0000 {
			compatible = "fsl,ls1021a-dcu";
			reg = <0x0 0x2ce0000 0x0 0x10000>;
			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 0>,
				<&clockgen 4 0>;
			clock-names = "dcu", "pix";
			big-endian;
			status = "disabled";
		};

		mdio0: mdio@2d24000 {
			compatible = "gianfar";
			device_type = "mdio";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2d24000 0x0 0x4000>,
			      <0x0 0x2d10030 0x0 0x4>;
		};

		ptp_clock@2d10e00 {
			compatible = "fsl,etsec-ptp";
			reg = <0x0 0x2d10e00 0x0 0xb0>;
			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
			fsl,tclk-period = <5>;
			fsl,tmr-prsc    = <2>;
			fsl,tmr-add     = <0xaaaaaaab>;
			fsl,tmr-fiper1  = <999999995>;
			fsl,tmr-fiper2  = <99990>;
			fsl,max-adj     = <499999999>;
		};

		enet0: ethernet@2d10000 {
			compatible = "fsl,etsec2";
			device_type = "network";
			#address-cells = <2>;
			#size-cells = <2>;
			interrupt-parent = <&gic>;
			model = "eTSEC";
			fsl,magic-packet;
			ranges;
			dma-coherent;

			queue-group@2d10000 {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d10000 0x0 0x1000>;
				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
			};

			queue-group@2d14000  {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d14000 0x0 0x1000>;
				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		enet1: ethernet@2d50000 {
			compatible = "fsl,etsec2";
			device_type = "network";
			#address-cells = <2>;
			#size-cells = <2>;
			interrupt-parent = <&gic>;
			model = "eTSEC";
			ranges;
			dma-coherent;

			queue-group@2d50000  {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d50000 0x0 0x1000>;
				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
			};

			queue-group@2d54000  {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d54000 0x0 0x1000>;
				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		enet2: ethernet@2d90000 {
			compatible = "fsl,etsec2";
			device_type = "network";
			#address-cells = <2>;
			#size-cells = <2>;
			interrupt-parent = <&gic>;
			model = "eTSEC";
			ranges;
			dma-coherent;

			queue-group@2d90000  {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d90000 0x0 0x1000>;
				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
			};

			queue-group@2d94000  {
				#address-cells = <2>;
				#size-cells = <2>;
				reg = <0x0 0x2d94000 0x0 0x1000>;
				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		usb2: usb@8600000 {
			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
			reg = <0x0 0x8600000 0x0 0x1000>;
			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
			dr_mode = "host";
			phy_type = "ulpi";
		};

		usb3: usb3@3100000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x3100000 0x0 0x10000>;
			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
		};

		pcie@3400000 {
			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
			fsl,pcie-scfg = <&scfg 0>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
		};

		pcie@3500000 {
			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
			fsl,pcie-scfg = <&scfg 1>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
		};

		can0: can@2a70000 {
			compatible = "fsl,ls1021ar2-flexcan";
			reg = <0x0 0x2a70000 0x0 0x1000>;
			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "ipg", "per";
			big-endian;
		};

		can1: can@2a80000 {
			compatible = "fsl,ls1021ar2-flexcan";
			reg = <0x0 0x2a80000 0x0 0x1000>;
			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "ipg", "per";
			big-endian;
		};

		can2: can@2a90000 {
			compatible = "fsl,ls1021ar2-flexcan";
			reg = <0x0 0x2a90000 0x0 0x1000>;
			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "ipg", "per";
			big-endian;
		};

		can3: can@2aa0000 {
			compatible = "fsl,ls1021ar2-flexcan";
			reg = <0x0 0x2aa0000 0x0 0x1000>;
			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			clock-names = "ipg", "per";
			big-endian;
		};

		ocram1: sram@10000000 {
			compatible = "mmio-sram";
			reg = <0x0 0x10000000 0x0 0x10000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x0 0x10000000 0x10000>;
		};

		ocram2: sram@10010000 {
			compatible = "mmio-sram";
			reg = <0x0 0x10010000 0x0 0x10000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x0 0x10010000 0x10000>;
		};
	};
};