blob: d64aed485fdccc1c9efb50d8569c6c5476b32b49 [file] [log] [blame]
Jaewon Kim27a28d32015-02-04 13:56:07 +09001/*
2 * extcon-max77843.c - Maxim MAX77843 extcon driver to support
3 * MUIC(Micro USB Interface Controller)
4 *
5 * Copyright (C) 2015 Samsung Electronics
6 * Author: Jaewon Kim <jaewon02.kim@samsung.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14#include <linux/extcon.h>
15#include <linux/i2c.h>
16#include <linux/interrupt.h>
17#include <linux/kernel.h>
18#include <linux/mfd/max77843-private.h>
19#include <linux/module.h>
20#include <linux/platform_device.h>
21#include <linux/workqueue.h>
22
23#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */
24
25enum max77843_muic_status {
26 MAX77843_MUIC_STATUS1 = 0,
27 MAX77843_MUIC_STATUS2,
28 MAX77843_MUIC_STATUS3,
29
30 MAX77843_MUIC_STATUS_NUM,
31};
32
33struct max77843_muic_info {
34 struct device *dev;
35 struct max77843 *max77843;
36 struct extcon_dev *edev;
37
38 struct mutex mutex;
39 struct work_struct irq_work;
40 struct delayed_work wq_detcable;
41
42 u8 status[MAX77843_MUIC_STATUS_NUM];
43 int prev_cable_type;
44 int prev_chg_type;
45 int prev_gnd_type;
46
47 bool irq_adc;
48 bool irq_chg;
49};
50
51enum max77843_muic_cable_group {
52 MAX77843_CABLE_GROUP_ADC = 0,
53 MAX77843_CABLE_GROUP_ADC_GND,
54 MAX77843_CABLE_GROUP_CHG,
55};
56
57enum max77843_muic_adc_debounce_time {
58 MAX77843_DEBOUNCE_TIME_5MS = 0,
59 MAX77843_DEBOUNCE_TIME_10MS,
60 MAX77843_DEBOUNCE_TIME_25MS,
61 MAX77843_DEBOUNCE_TIME_38_62MS,
62};
63
64/* Define accessory cable type */
65enum max77843_muic_accessory_type {
66 MAX77843_MUIC_ADC_GROUND = 0,
67 MAX77843_MUIC_ADC_SEND_END_BUTTON,
68 MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
69 MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
70 MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
71 MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
72 MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
73 MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
74 MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
75 MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
76 MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
77 MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
78 MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
79 MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
80 MAX77843_MUIC_ADC_RESERVED_ACC_1,
81 MAX77843_MUIC_ADC_RESERVED_ACC_2,
82 MAX77843_MUIC_ADC_RESERVED_ACC_3,
83 MAX77843_MUIC_ADC_RESERVED_ACC_4,
84 MAX77843_MUIC_ADC_RESERVED_ACC_5,
85 MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
86 MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
87 MAX77843_MUIC_ADC_TTY_CONVERTER,
88 MAX77843_MUIC_ADC_UART_CABLE,
89 MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
90 MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
91 MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
92 MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
93 MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
94 MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
95 MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
96 MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
97 MAX77843_MUIC_ADC_OPEN,
98
99 /* The blow accessories should check
100 not only ADC value but also ADC1K and VBVolt value. */
101 /* Offset|ADC1K|VBVolt| */
102 MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */
103 MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */
104 MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */
105 MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */
106};
107
108/* Define charger cable type */
109enum max77843_muic_charger_type {
110 MAX77843_MUIC_CHG_NONE = 0,
111 MAX77843_MUIC_CHG_USB,
112 MAX77843_MUIC_CHG_DOWNSTREAM,
113 MAX77843_MUIC_CHG_DEDICATED,
114 MAX77843_MUIC_CHG_SPECIAL_500MA,
115 MAX77843_MUIC_CHG_SPECIAL_1A,
116 MAX77843_MUIC_CHG_SPECIAL_BIAS,
117 MAX77843_MUIC_CHG_RESERVED,
118 MAX77843_MUIC_CHG_GND,
119};
120
121enum {
122 MAX77843_CABLE_USB = 0,
123 MAX77843_CABLE_USB_HOST,
124 MAX77843_CABLE_TA,
125 MAX77843_CABLE_CHARGE_DOWNSTREAM,
126 MAX77843_CABLE_FAST_CHARGER,
127 MAX77843_CABLE_SLOW_CHARGER,
128 MAX77843_CABLE_MHL,
129 MAX77843_CABLE_MHL_TA,
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900130 MAX77843_CABLE_JIG,
Jaewon Kim27a28d32015-02-04 13:56:07 +0900131
132 MAX77843_CABLE_NUM,
133};
134
135static const char *max77843_extcon_cable[] = {
136 [MAX77843_CABLE_USB] = "USB",
137 [MAX77843_CABLE_USB_HOST] = "USB-HOST",
138 [MAX77843_CABLE_TA] = "TA",
139 [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
140 [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
141 [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
142 [MAX77843_CABLE_MHL] = "MHL",
143 [MAX77843_CABLE_MHL_TA] = "MHL-TA",
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900144 [MAX77843_CABLE_JIG] = "JIG",
Jaewon Kim27a28d32015-02-04 13:56:07 +0900145};
146
147struct max77843_muic_irq {
148 unsigned int irq;
149 const char *name;
150 unsigned int virq;
151};
152
153static struct max77843_muic_irq max77843_muic_irqs[] = {
154 { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
155 { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
156 { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
157 { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
158 { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
159 { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
160 { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
161 { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
162 { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
163 { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
164 { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
165 { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
166 { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
167 { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
168 { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
169 { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
170};
171
172static const struct regmap_config max77843_muic_regmap_config = {
173 .reg_bits = 8,
174 .val_bits = 8,
175 .max_register = MAX77843_MUIC_REG_END,
176};
177
178static const struct regmap_irq max77843_muic_irq[] = {
179 /* INT1 interrupt */
180 { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
181 { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
182 { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
183
184 /* INT2 interrupt */
185 { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
186 { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
187 { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
188 { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
189 { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
190
191 /* INT3 interrupt */
192 { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
193 { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
194 { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
195 { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
196 { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
197 { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
198 { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
199 { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
200};
201
202static const struct regmap_irq_chip max77843_muic_irq_chip = {
203 .name = "max77843-muic",
204 .status_base = MAX77843_MUIC_REG_INT1,
205 .mask_base = MAX77843_MUIC_REG_INTMASK1,
206 .mask_invert = true,
207 .num_regs = 3,
208 .irqs = max77843_muic_irq,
209 .num_irqs = ARRAY_SIZE(max77843_muic_irq),
210};
211
212static int max77843_muic_set_path(struct max77843_muic_info *info,
213 u8 val, bool attached)
214{
215 struct max77843 *max77843 = info->max77843;
216 int ret = 0;
217 unsigned int ctrl1, ctrl2;
218
219 if (attached)
220 ctrl1 = val;
221 else
222 ctrl1 = CONTROL1_SW_OPEN;
223
224 ret = regmap_update_bits(max77843->regmap_muic,
225 MAX77843_MUIC_REG_CONTROL1,
226 CONTROL1_COM_SW, ctrl1);
227 if (ret < 0) {
228 dev_err(info->dev, "Cannot switch MUIC port\n");
229 return ret;
230 }
231
232 if (attached)
233 ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
234 else
235 ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
236
237 ret = regmap_update_bits(max77843->regmap_muic,
238 MAX77843_MUIC_REG_CONTROL2,
239 MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
240 MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
241 if (ret < 0) {
242 dev_err(info->dev, "Cannot update lowpower mode\n");
243 return ret;
244 }
245
246 dev_dbg(info->dev,
247 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
248 ctrl1, ctrl2, attached ? "attached" : "detached");
249
250 return 0;
251}
252
253static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
254 enum max77843_muic_cable_group group, bool *attached)
255{
256 int adc, chg_type, cable_type, gnd_type;
257
258 adc = info->status[MAX77843_MUIC_STATUS1] &
259 MAX77843_MUIC_STATUS1_ADC_MASK;
260 adc >>= STATUS1_ADC_SHIFT;
261
262 switch (group) {
263 case MAX77843_CABLE_GROUP_ADC:
264 if (adc == MAX77843_MUIC_ADC_OPEN) {
265 *attached = false;
266 cable_type = info->prev_cable_type;
267 info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
268 } else {
269 *attached = true;
270 cable_type = info->prev_cable_type = adc;
271 }
272 break;
273 case MAX77843_CABLE_GROUP_CHG:
274 chg_type = info->status[MAX77843_MUIC_STATUS2] &
275 MAX77843_MUIC_STATUS2_CHGTYP_MASK;
276
277 /* Check GROUND accessory with charger cable */
278 if (adc == MAX77843_MUIC_ADC_GROUND) {
279 if (chg_type == MAX77843_MUIC_CHG_NONE) {
280 /* The following state when charger cable is
281 * disconnected but the GROUND accessory still
282 * connected */
283 *attached = false;
284 cable_type = info->prev_chg_type;
285 info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
286 } else {
287
288 /* The following state when charger cable is
289 * connected on the GROUND accessory */
290 *attached = true;
291 cable_type = MAX77843_MUIC_CHG_GND;
292 info->prev_chg_type = MAX77843_MUIC_CHG_GND;
293 }
294 break;
295 }
296
297 if (chg_type == MAX77843_MUIC_CHG_NONE) {
298 *attached = false;
299 cable_type = info->prev_chg_type;
300 info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
301 } else {
302 *attached = true;
303 cable_type = info->prev_chg_type = chg_type;
304 }
305 break;
306 case MAX77843_CABLE_GROUP_ADC_GND:
307 if (adc == MAX77843_MUIC_ADC_OPEN) {
308 *attached = false;
309 cable_type = info->prev_gnd_type;
310 info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
311 } else {
312 *attached = true;
313
314 /* Offset|ADC1K|VBVolt|
315 * 0x1| 0| 0| USB-HOST
316 * 0x1| 0| 1| USB-HOST with VB
317 * 0x1| 1| 0| MHL
318 * 0x1| 1| 1| MHL with VB */
319 /* Get ADC1K register bit */
320 gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
321 MAX77843_MUIC_STATUS1_ADC1K_MASK);
322
323 /* Get VBVolt register bit */
324 gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
325 MAX77843_MUIC_STATUS2_VBVOLT_MASK);
326 gnd_type >>= STATUS2_VBVOLT_SHIFT;
327
328 /* Offset of GND cable */
329 gnd_type |= MAX77843_MUIC_GND_USB_HOST;
330 cable_type = info->prev_gnd_type = gnd_type;
331 }
332 break;
333 default:
334 dev_err(info->dev, "Unknown cable group (%d)\n", group);
335 cable_type = -EINVAL;
336 break;
337 }
338
339 return cable_type;
340}
341
342static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
343{
344 int ret, gnd_cable_type;
345 bool attached;
346
347 gnd_cable_type = max77843_muic_get_cable_type(info,
348 MAX77843_CABLE_GROUP_ADC_GND, &attached);
349 dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
350 attached ? "attached" : "detached", gnd_cable_type);
351
352 switch (gnd_cable_type) {
353 case MAX77843_MUIC_GND_USB_HOST:
354 case MAX77843_MUIC_GND_USB_HOST_VB:
355 ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
356 if (ret < 0)
357 return ret;
358
359 extcon_set_cable_state(info->edev, "USB-HOST", attached);
360 break;
361 case MAX77843_MUIC_GND_MHL_VB:
362 case MAX77843_MUIC_GND_MHL:
363 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
364 if (ret < 0)
365 return ret;
366
367 extcon_set_cable_state(info->edev, "MHL", attached);
368 break;
369 default:
370 dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
371 attached ? "attached" : "detached", gnd_cable_type);
372 return -EINVAL;
373 }
374
375 return 0;
376}
377
378static int max77843_muic_jig_handler(struct max77843_muic_info *info,
379 int cable_type, bool attached)
380{
381 int ret;
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900382 u8 path = CONTROL1_SW_OPEN;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900383
384 dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
385 attached ? "attached" : "detached", cable_type);
386
387 switch (cable_type) {
388 case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
Jaewon Kim27a28d32015-02-04 13:56:07 +0900389 case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900390 path = CONTROL1_SW_USB;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900391 break;
392 case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900393 path = CONTROL1_SW_UART;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900394 break;
395 default:
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900396 return -EINVAL;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900397 }
398
Chanwoo Choi41b3c012015-04-24 19:50:48 +0900399 ret = max77843_muic_set_path(info, path, attached);
400 if (ret < 0)
401 return ret;
402
403 extcon_set_cable_state(info->edev, "JIG", attached);
404
Jaewon Kim27a28d32015-02-04 13:56:07 +0900405 return 0;
406}
407
408static int max77843_muic_adc_handler(struct max77843_muic_info *info)
409{
410 int ret, cable_type;
411 bool attached;
412
413 cable_type = max77843_muic_get_cable_type(info,
414 MAX77843_CABLE_GROUP_ADC, &attached);
415
416 dev_dbg(info->dev,
417 "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
418 attached ? "attached" : "detached", cable_type,
419 info->prev_cable_type);
420
421 switch (cable_type) {
422 case MAX77843_MUIC_ADC_GROUND:
423 ret = max77843_muic_adc_gnd_handler(info);
424 if (ret < 0)
425 return ret;
426 break;
427 case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
428 case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
429 case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
430 ret = max77843_muic_jig_handler(info, cable_type, attached);
431 if (ret < 0)
432 return ret;
433 break;
434 case MAX77843_MUIC_ADC_SEND_END_BUTTON:
435 case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
436 case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
437 case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
438 case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
439 case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
440 case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
441 case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
442 case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
443 case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
444 case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
445 case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
446 case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
447 case MAX77843_MUIC_ADC_RESERVED_ACC_1:
448 case MAX77843_MUIC_ADC_RESERVED_ACC_2:
449 case MAX77843_MUIC_ADC_RESERVED_ACC_3:
450 case MAX77843_MUIC_ADC_RESERVED_ACC_4:
451 case MAX77843_MUIC_ADC_RESERVED_ACC_5:
452 case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
453 case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
454 case MAX77843_MUIC_ADC_TTY_CONVERTER:
455 case MAX77843_MUIC_ADC_UART_CABLE:
456 case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
457 case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
458 case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
459 case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
460 case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
461 case MAX77843_MUIC_ADC_OPEN:
462 dev_err(info->dev,
463 "accessory is %s but it isn't used (adc:0x%x)\n",
464 attached ? "attached" : "detached", cable_type);
465 return -EAGAIN;
466 default:
467 dev_err(info->dev,
468 "failed to detect %s accessory (adc:0x%x)\n",
469 attached ? "attached" : "detached", cable_type);
470 return -EINVAL;
471 }
472
473 return 0;
474}
475
476static int max77843_muic_chg_handler(struct max77843_muic_info *info)
477{
478 int ret, chg_type, gnd_type;
479 bool attached;
480
481 chg_type = max77843_muic_get_cable_type(info,
482 MAX77843_CABLE_GROUP_CHG, &attached);
483
484 dev_dbg(info->dev,
485 "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
486 attached ? "attached" : "detached",
487 chg_type, info->prev_chg_type);
488
489 switch (chg_type) {
490 case MAX77843_MUIC_CHG_USB:
491 ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
492 if (ret < 0)
493 return ret;
494
495 extcon_set_cable_state(info->edev, "USB", attached);
496 break;
497 case MAX77843_MUIC_CHG_DOWNSTREAM:
498 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
499 if (ret < 0)
500 return ret;
501
502 extcon_set_cable_state(info->edev,
503 "CHARGER-DOWNSTREAM", attached);
504 break;
505 case MAX77843_MUIC_CHG_DEDICATED:
506 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
507 if (ret < 0)
508 return ret;
509
510 extcon_set_cable_state(info->edev, "TA", attached);
511 break;
512 case MAX77843_MUIC_CHG_SPECIAL_500MA:
513 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
514 if (ret < 0)
515 return ret;
516
517 extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
518 break;
519 case MAX77843_MUIC_CHG_SPECIAL_1A:
520 ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
521 if (ret < 0)
522 return ret;
523
524 extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
525 break;
526 case MAX77843_MUIC_CHG_GND:
527 gnd_type = max77843_muic_get_cable_type(info,
528 MAX77843_CABLE_GROUP_ADC_GND, &attached);
529
530 /* Charger cable on MHL accessory is attach or detach */
531 if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
532 extcon_set_cable_state(info->edev, "MHL-TA", true);
533 else if (gnd_type == MAX77843_MUIC_GND_MHL)
534 extcon_set_cable_state(info->edev, "MHL-TA", false);
535 break;
536 case MAX77843_MUIC_CHG_NONE:
537 break;
538 default:
539 dev_err(info->dev,
540 "failed to detect %s accessory (chg_type:0x%x)\n",
541 attached ? "attached" : "detached", chg_type);
542
543 max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
544 return -EINVAL;
545 }
546
547 return 0;
548}
549
550static void max77843_muic_irq_work(struct work_struct *work)
551{
552 struct max77843_muic_info *info = container_of(work,
553 struct max77843_muic_info, irq_work);
554 struct max77843 *max77843 = info->max77843;
555 int ret = 0;
556
557 mutex_lock(&info->mutex);
558
559 ret = regmap_bulk_read(max77843->regmap_muic,
560 MAX77843_MUIC_REG_STATUS1, info->status,
561 MAX77843_MUIC_STATUS_NUM);
562 if (ret) {
563 dev_err(info->dev, "Cannot read STATUS registers\n");
564 mutex_unlock(&info->mutex);
565 return;
566 }
567
568 if (info->irq_adc) {
569 ret = max77843_muic_adc_handler(info);
570 if (ret)
571 dev_err(info->dev, "Unknown cable type\n");
572 info->irq_adc = false;
573 }
574
575 if (info->irq_chg) {
576 ret = max77843_muic_chg_handler(info);
577 if (ret)
578 dev_err(info->dev, "Unknown charger type\n");
579 info->irq_chg = false;
580 }
581
582 mutex_unlock(&info->mutex);
583}
584
585static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
586{
587 struct max77843_muic_info *info = data;
588 int i, irq_type = -1;
589
590 for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
591 if (irq == max77843_muic_irqs[i].virq)
592 irq_type = max77843_muic_irqs[i].irq;
593
594 switch (irq_type) {
595 case MAX77843_MUIC_IRQ_INT1_ADC:
596 case MAX77843_MUIC_IRQ_INT1_ADCERROR:
597 case MAX77843_MUIC_IRQ_INT1_ADC1K:
598 info->irq_adc = true;
599 break;
600 case MAX77843_MUIC_IRQ_INT2_CHGTYP:
601 case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
602 case MAX77843_MUIC_IRQ_INT2_DCDTMR:
603 case MAX77843_MUIC_IRQ_INT2_DXOVP:
604 case MAX77843_MUIC_IRQ_INT2_VBVOLT:
605 info->irq_chg = true;
606 break;
607 case MAX77843_MUIC_IRQ_INT3_VBADC:
608 case MAX77843_MUIC_IRQ_INT3_VDNMON:
609 case MAX77843_MUIC_IRQ_INT3_DNRES:
610 case MAX77843_MUIC_IRQ_INT3_MPNACK:
611 case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
612 case MAX77843_MUIC_IRQ_INT3_MRXTRF:
613 case MAX77843_MUIC_IRQ_INT3_MRXPERR:
614 case MAX77843_MUIC_IRQ_INT3_MRXRDY:
615 break;
616 default:
617 dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
618 break;
619 }
620
621 schedule_work(&info->irq_work);
622
623 return IRQ_HANDLED;
624}
625
626static void max77843_muic_detect_cable_wq(struct work_struct *work)
627{
628 struct max77843_muic_info *info = container_of(to_delayed_work(work),
629 struct max77843_muic_info, wq_detcable);
630 struct max77843 *max77843 = info->max77843;
631 int chg_type, adc, ret;
632 bool attached;
633
634 mutex_lock(&info->mutex);
635
636 ret = regmap_bulk_read(max77843->regmap_muic,
637 MAX77843_MUIC_REG_STATUS1, info->status,
638 MAX77843_MUIC_STATUS_NUM);
639 if (ret) {
640 dev_err(info->dev, "Cannot read STATUS registers\n");
641 goto err_cable_wq;
642 }
643
644 adc = max77843_muic_get_cable_type(info,
645 MAX77843_CABLE_GROUP_ADC, &attached);
646 if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
647 ret = max77843_muic_adc_handler(info);
648 if (ret < 0) {
649 dev_err(info->dev, "Cannot detect accessory\n");
650 goto err_cable_wq;
651 }
652 }
653
654 chg_type = max77843_muic_get_cable_type(info,
655 MAX77843_CABLE_GROUP_CHG, &attached);
656 if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
657 ret = max77843_muic_chg_handler(info);
658 if (ret < 0) {
659 dev_err(info->dev, "Cannot detect charger accessory\n");
660 goto err_cable_wq;
661 }
662 }
663
664err_cable_wq:
665 mutex_unlock(&info->mutex);
666}
667
668static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
669 enum max77843_muic_adc_debounce_time time)
670{
671 struct max77843 *max77843 = info->max77843;
Dan Carpenterd927c592015-03-15 13:49:47 +0300672 int ret;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900673
674 switch (time) {
675 case MAX77843_DEBOUNCE_TIME_5MS:
676 case MAX77843_DEBOUNCE_TIME_10MS:
677 case MAX77843_DEBOUNCE_TIME_25MS:
678 case MAX77843_DEBOUNCE_TIME_38_62MS:
679 ret = regmap_update_bits(max77843->regmap_muic,
680 MAX77843_MUIC_REG_CONTROL4,
681 MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
682 time << CONTROL4_ADCDBSET_SHIFT);
683 if (ret < 0) {
684 dev_err(info->dev, "Cannot write MUIC regmap\n");
685 return ret;
686 }
687 break;
688 default:
689 dev_err(info->dev, "Invalid ADC debounce time\n");
690 return -EINVAL;
691 }
692
693 return 0;
694}
695
696static int max77843_init_muic_regmap(struct max77843 *max77843)
697{
698 int ret;
699
700 max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
701 I2C_ADDR_MUIC);
702 if (!max77843->i2c_muic) {
703 dev_err(&max77843->i2c->dev,
704 "Cannot allocate I2C device for MUIC\n");
Dan Carpenterb9b518f2015-03-15 13:56:04 +0300705 return -ENOMEM;
Jaewon Kim27a28d32015-02-04 13:56:07 +0900706 }
707
708 i2c_set_clientdata(max77843->i2c_muic, max77843);
709
710 max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
711 &max77843_muic_regmap_config);
712 if (IS_ERR(max77843->regmap_muic)) {
713 ret = PTR_ERR(max77843->regmap_muic);
714 goto err_muic_i2c;
715 }
716
717 ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
718 IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
719 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
720 if (ret < 0) {
721 dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
722 goto err_muic_i2c;
723 }
724
725 return 0;
726
727err_muic_i2c:
728 i2c_unregister_device(max77843->i2c_muic);
729
730 return ret;
731}
732
733static int max77843_muic_probe(struct platform_device *pdev)
734{
735 struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
736 struct max77843_muic_info *info;
737 unsigned int id;
738 int i, ret;
739
740 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
741 if (!info)
742 return -ENOMEM;
743
744 info->dev = &pdev->dev;
745 info->max77843 = max77843;
746
747 platform_set_drvdata(pdev, info);
748 mutex_init(&info->mutex);
749
750 /* Initialize i2c and regmap */
751 ret = max77843_init_muic_regmap(max77843);
752 if (ret) {
753 dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
754 return ret;
755 }
756
757 /* Turn off auto detection configuration */
758 ret = regmap_update_bits(max77843->regmap_muic,
759 MAX77843_MUIC_REG_CONTROL4,
760 MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
761 MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
762 CONTROL4_AUTO_DISABLE);
763
764 /* Initialize extcon device */
765 info->edev = devm_extcon_dev_allocate(&pdev->dev,
766 max77843_extcon_cable);
767 if (IS_ERR(info->edev)) {
768 dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
769 ret = -ENODEV;
770 goto err_muic_irq;
771 }
772
773 ret = devm_extcon_dev_register(&pdev->dev, info->edev);
774 if (ret) {
775 dev_err(&pdev->dev, "Failed to register extcon device\n");
776 goto err_muic_irq;
777 }
778
779 /* Set ADC debounce time */
780 max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
781
782 /* Set initial path for UART */
783 max77843_muic_set_path(info, CONTROL1_SW_UART, true);
784
785 /* Check revision number of MUIC device */
786 ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
787 if (ret < 0) {
788 dev_err(&pdev->dev, "Failed to read revision number\n");
789 goto err_muic_irq;
790 }
791 dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
792
793 /* Support virtual irq domain for max77843 MUIC device */
794 INIT_WORK(&info->irq_work, max77843_muic_irq_work);
795
796 for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
797 struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
798 unsigned int virq = 0;
799
800 virq = regmap_irq_get_virq(max77843->irq_data_muic,
801 muic_irq->irq);
802 if (virq <= 0) {
803 ret = -EINVAL;
804 goto err_muic_irq;
805 }
806 muic_irq->virq = virq;
807
808 ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
809 max77843_muic_irq_handler, IRQF_NO_SUSPEND,
810 muic_irq->name, info);
811 if (ret) {
812 dev_err(&pdev->dev,
813 "Failed to request irq (IRQ: %d, error: %d)\n",
814 muic_irq->irq, ret);
815 goto err_muic_irq;
816 }
817 }
818
819 /* Detect accessory after completing the initialization of platform */
820 INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
821 queue_delayed_work(system_power_efficient_wq,
822 &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
823
824 return 0;
825
826err_muic_irq:
827 regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
828 i2c_unregister_device(max77843->i2c_muic);
829
830 return ret;
831}
832
833static int max77843_muic_remove(struct platform_device *pdev)
834{
835 struct max77843_muic_info *info = platform_get_drvdata(pdev);
836 struct max77843 *max77843 = info->max77843;
837
838 cancel_work_sync(&info->irq_work);
839 regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
840 i2c_unregister_device(max77843->i2c_muic);
841
842 return 0;
843}
844
845static const struct platform_device_id max77843_muic_id[] = {
846 { "max77843-muic", },
847 { /* sentinel */ },
848};
849MODULE_DEVICE_TABLE(platform, max77843_muic_id);
850
851static struct platform_driver max77843_muic_driver = {
852 .driver = {
853 .name = "max77843-muic",
854 },
855 .probe = max77843_muic_probe,
856 .remove = max77843_muic_remove,
857 .id_table = max77843_muic_id,
858};
859
860static int __init max77843_muic_init(void)
861{
862 return platform_driver_register(&max77843_muic_driver);
863}
864subsys_initcall(max77843_muic_init);
865
866MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
867MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
868MODULE_LICENSE("GPL");