| Chris Packham | 15b2703 | 2021-03-17 17:02:31 +1300 | [diff] [blame] | 1 | .. SPDX-License-Identifier: GPL-2.0 |
| 2 | |
| 3 | Kernel driver bpa-rs600 |
| 4 | ======================= |
| 5 | |
| 6 | Supported chips: |
| 7 | |
| 8 | * BPA-RS600-120 |
| 9 | |
| 10 | Datasheet: Publicly available at the BluTek website |
| 11 | http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf |
| 12 | |
| 13 | Authors: |
| 14 | - Chris Packham <chris.packham@alliedtelesis.co.nz> |
| 15 | |
| 16 | Description |
| 17 | ----------- |
| 18 | |
| 19 | The BPA-RS600 is a compact 600W removable power supply module. |
| 20 | |
| 21 | Usage Notes |
| 22 | ----------- |
| 23 | |
| 24 | This driver does not probe for PMBus devices. You will have to instantiate |
| 25 | devices explicitly. |
| 26 | |
| 27 | Sysfs attributes |
| 28 | ---------------- |
| 29 | |
| 30 | ======================= ============================================ |
| 31 | curr1_label "iin" |
| 32 | curr1_input Measured input current |
| 33 | curr1_max Maximum input current |
| 34 | curr1_max_alarm Input current high alarm |
| 35 | |
| 36 | curr2_label "iout1" |
| 37 | curr2_input Measured output current |
| 38 | curr2_max Maximum output current |
| 39 | curr2_max_alarm Output current high alarm |
| 40 | |
| 41 | fan1_input Measured fan speed |
| 42 | fan1_alarm Fan warning |
| 43 | fan1_fault Fan fault |
| 44 | |
| 45 | in1_label "vin" |
| 46 | in1_input Measured input voltage |
| 47 | in1_max Maximum input voltage |
| 48 | in1_max_alarm Input voltage high alarm |
| 49 | in1_min Minimum input voltage |
| 50 | in1_min_alarm Input voltage low alarm |
| 51 | |
| 52 | in2_label "vout1" |
| 53 | in2_input Measured output voltage |
| 54 | in2_max Maximum output voltage |
| 55 | in2_max_alarm Output voltage high alarm |
| 56 | in2_min Maximum output voltage |
| 57 | in2_min_alarm Output voltage low alarm |
| 58 | |
| 59 | power1_label "pin" |
| 60 | power1_input Measured input power |
| 61 | power1_alarm Input power alarm |
| 62 | power1_max Maximum input power |
| 63 | |
| 64 | power2_label "pout1" |
| 65 | power2_input Measured output power |
| 66 | power2_max Maximum output power |
| 67 | power2_max_alarm Output power high alarm |
| 68 | |
| 69 | temp1_input Measured temperature around input connector |
| 70 | temp1_alarm Temperature alarm |
| 71 | |
| 72 | temp2_input Measured temperature around output connector |
| 73 | temp2_alarm Temperature alarm |
| 74 | ======================= ============================================ |