Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // TI LM3532 LED driver |
| 3 | // Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ |
Pavel | 31e065c | 2020-01-05 23:36:58 +0100 | [diff] [blame] | 4 | // http://www.ti.com/lit/ds/symlink/lm3532.pdf |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 5 | |
| 6 | #include <linux/i2c.h> |
| 7 | #include <linux/leds.h> |
| 8 | #include <linux/slab.h> |
| 9 | #include <linux/regmap.h> |
| 10 | #include <linux/types.h> |
| 11 | #include <linux/regulator/consumer.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <uapi/linux/uleds.h> |
| 14 | #include <linux/gpio/consumer.h> |
| 15 | |
| 16 | #define LM3532_NAME "lm3532-led" |
| 17 | #define LM3532_BL_MODE_MANUAL 0x00 |
| 18 | #define LM3532_BL_MODE_ALS 0x01 |
| 19 | |
| 20 | #define LM3532_REG_OUTPUT_CFG 0x10 |
| 21 | #define LM3532_REG_STARTSHUT_RAMP 0x11 |
| 22 | #define LM3532_REG_RT_RAMP 0x12 |
| 23 | #define LM3532_REG_PWM_A_CFG 0x13 |
| 24 | #define LM3532_REG_PWM_B_CFG 0x14 |
| 25 | #define LM3532_REG_PWM_C_CFG 0x15 |
| 26 | #define LM3532_REG_ZONE_CFG_A 0x16 |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 27 | #define LM3532_REG_CTRL_A_FS_CURR 0x17 |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 28 | #define LM3532_REG_ZONE_CFG_B 0x18 |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 29 | #define LM3532_REG_CTRL_B_FS_CURR 0x19 |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 30 | #define LM3532_REG_ZONE_CFG_C 0x1a |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 31 | #define LM3532_REG_CTRL_C_FS_CURR 0x1b |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 32 | #define LM3532_REG_ENABLE 0x1d |
| 33 | #define LM3532_ALS_CONFIG 0x23 |
| 34 | #define LM3532_REG_ZN_0_HI 0x60 |
| 35 | #define LM3532_REG_ZN_0_LO 0x61 |
| 36 | #define LM3532_REG_ZN_1_HI 0x62 |
| 37 | #define LM3532_REG_ZN_1_LO 0x63 |
| 38 | #define LM3532_REG_ZN_2_HI 0x64 |
| 39 | #define LM3532_REG_ZN_2_LO 0x65 |
| 40 | #define LM3532_REG_ZN_3_HI 0x66 |
| 41 | #define LM3532_REG_ZN_3_LO 0x67 |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 42 | #define LM3532_REG_ZONE_TRGT_A 0x70 |
| 43 | #define LM3532_REG_ZONE_TRGT_B 0x75 |
| 44 | #define LM3532_REG_ZONE_TRGT_C 0x7a |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 45 | #define LM3532_REG_MAX 0x7e |
| 46 | |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 47 | /* Control Enable */ |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 48 | #define LM3532_CTRL_A_ENABLE BIT(0) |
| 49 | #define LM3532_CTRL_B_ENABLE BIT(1) |
| 50 | #define LM3532_CTRL_C_ENABLE BIT(2) |
| 51 | |
| 52 | /* PWM Zone Control */ |
| 53 | #define LM3532_PWM_ZONE_MASK 0x7c |
| 54 | #define LM3532_PWM_ZONE_0_EN BIT(2) |
| 55 | #define LM3532_PWM_ZONE_1_EN BIT(3) |
| 56 | #define LM3532_PWM_ZONE_2_EN BIT(4) |
| 57 | #define LM3532_PWM_ZONE_3_EN BIT(5) |
| 58 | #define LM3532_PWM_ZONE_4_EN BIT(6) |
| 59 | |
| 60 | /* Brightness Configuration */ |
| 61 | #define LM3532_I2C_CTRL BIT(0) |
| 62 | #define LM3532_ALS_CTRL 0 |
| 63 | #define LM3532_LINEAR_MAP BIT(1) |
| 64 | #define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) |
| 65 | #define LM3532_ZONE_0 0 |
| 66 | #define LM3532_ZONE_1 BIT(2) |
| 67 | #define LM3532_ZONE_2 BIT(3) |
| 68 | #define LM3532_ZONE_3 (BIT(2) | BIT(3)) |
| 69 | #define LM3532_ZONE_4 BIT(4) |
| 70 | |
| 71 | #define LM3532_ENABLE_ALS BIT(3) |
| 72 | #define LM3532_ALS_SEL_SHIFT 6 |
| 73 | |
| 74 | /* Zone Boundary Register */ |
| 75 | #define LM3532_ALS_WINDOW_mV 2000 |
| 76 | #define LM3532_ALS_ZB_MAX 4 |
| 77 | #define LM3532_ALS_OFFSET_mV 2 |
| 78 | |
| 79 | #define LM3532_CONTROL_A 0 |
| 80 | #define LM3532_CONTROL_B 1 |
| 81 | #define LM3532_CONTROL_C 2 |
| 82 | #define LM3532_MAX_CONTROL_BANKS 3 |
| 83 | #define LM3532_MAX_LED_STRINGS 3 |
| 84 | |
| 85 | #define LM3532_OUTPUT_CFG_MASK 0x3 |
| 86 | #define LM3532_BRT_VAL_ADJUST 8 |
| 87 | #define LM3532_RAMP_DOWN_SHIFT 3 |
| 88 | |
| 89 | #define LM3532_NUM_RAMP_VALS 8 |
| 90 | #define LM3532_NUM_AVG_VALS 8 |
| 91 | #define LM3532_NUM_IMP_VALS 32 |
| 92 | |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 93 | #define LM3532_FS_CURR_MIN 5000 |
| 94 | #define LM3532_FS_CURR_MAX 29800 |
| 95 | #define LM3532_FS_CURR_STEP 800 |
| 96 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 97 | /* |
| 98 | * struct lm3532_als_data |
| 99 | * @config - value of ALS configuration register |
| 100 | * @als1_imp_sel - value of ALS1 resistor select register |
| 101 | * @als2_imp_sel - value of ALS2 resistor select register |
| 102 | * @als_avrg_time - ALS averaging time |
| 103 | * @als_input_mode - ALS input mode for brightness control |
| 104 | * @als_vmin - Minimum ALS voltage |
| 105 | * @als_vmax - Maximum ALS voltage |
| 106 | * @zone_lo - values of ALS lo ZB(Zone Boundary) registers |
| 107 | * @zone_hi - values of ALS hi ZB(Zone Boundary) registers |
| 108 | */ |
| 109 | struct lm3532_als_data { |
| 110 | u8 config; |
| 111 | u8 als1_imp_sel; |
| 112 | u8 als2_imp_sel; |
| 113 | u8 als_avrg_time; |
| 114 | u8 als_input_mode; |
| 115 | u32 als_vmin; |
| 116 | u32 als_vmax; |
| 117 | u8 zones_lo[LM3532_ALS_ZB_MAX]; |
| 118 | u8 zones_hi[LM3532_ALS_ZB_MAX]; |
| 119 | }; |
| 120 | |
| 121 | /** |
| 122 | * struct lm3532_led |
| 123 | * @led_dev: led class device |
| 124 | * @priv - Pointer the device data structure |
| 125 | * @control_bank - Control bank the LED is associated to |
| 126 | * @mode - Mode of the LED string |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 127 | * @ctrl_brt_pointer - Zone target register that controls the sink |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 128 | * @num_leds - Number of LED strings are supported in this array |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 129 | * @full_scale_current - The full-scale current setting for the current sink. |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 130 | * @led_strings - The LED strings supported in this array |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 131 | * @enabled - Enabled status |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 132 | * @label - LED label |
| 133 | */ |
| 134 | struct lm3532_led { |
| 135 | struct led_classdev led_dev; |
| 136 | struct lm3532_data *priv; |
| 137 | |
| 138 | int control_bank; |
| 139 | int mode; |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 140 | int ctrl_brt_pointer; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 141 | int num_leds; |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 142 | int full_scale_current; |
Colin Ian King | 2879927 | 2020-03-13 17:19:37 +0000 | [diff] [blame^] | 143 | unsigned int enabled:1; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 144 | u32 led_strings[LM3532_MAX_CONTROL_BANKS]; |
| 145 | char label[LED_MAX_NAME_SIZE]; |
| 146 | }; |
| 147 | |
| 148 | /** |
| 149 | * struct lm3532_data |
| 150 | * @enable_gpio - Hardware enable gpio |
| 151 | * @regulator: regulator |
| 152 | * @client: i2c client |
| 153 | * @regmap - Devices register map |
| 154 | * @dev - Pointer to the devices device struct |
| 155 | * @lock - Lock for reading/writing the device |
| 156 | * @als_data - Pointer to the als data struct |
| 157 | * @runtime_ramp_up - Runtime ramp up setting |
| 158 | * @runtime_ramp_down - Runtime ramp down setting |
| 159 | * @leds - Array of LED strings |
| 160 | */ |
| 161 | struct lm3532_data { |
| 162 | struct gpio_desc *enable_gpio; |
| 163 | struct regulator *regulator; |
| 164 | struct i2c_client *client; |
| 165 | struct regmap *regmap; |
| 166 | struct device *dev; |
| 167 | struct mutex lock; |
| 168 | |
| 169 | struct lm3532_als_data *als_data; |
| 170 | |
| 171 | u32 runtime_ramp_up; |
| 172 | u32 runtime_ramp_down; |
| 173 | |
| 174 | struct lm3532_led leds[]; |
| 175 | }; |
| 176 | |
| 177 | static const struct reg_default lm3532_reg_defs[] = { |
| 178 | {LM3532_REG_OUTPUT_CFG, 0xe4}, |
| 179 | {LM3532_REG_STARTSHUT_RAMP, 0xc0}, |
| 180 | {LM3532_REG_RT_RAMP, 0xc0}, |
| 181 | {LM3532_REG_PWM_A_CFG, 0x82}, |
| 182 | {LM3532_REG_PWM_B_CFG, 0x82}, |
| 183 | {LM3532_REG_PWM_C_CFG, 0x82}, |
| 184 | {LM3532_REG_ZONE_CFG_A, 0xf1}, |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 185 | {LM3532_REG_CTRL_A_FS_CURR, 0xf3}, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 186 | {LM3532_REG_ZONE_CFG_B, 0xf1}, |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 187 | {LM3532_REG_CTRL_B_FS_CURR, 0xf3}, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 188 | {LM3532_REG_ZONE_CFG_C, 0xf1}, |
Dan Murphy | 4c90545 | 2019-08-20 14:53:04 -0500 | [diff] [blame] | 189 | {LM3532_REG_CTRL_C_FS_CURR, 0xf3}, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 190 | {LM3532_REG_ENABLE, 0xf8}, |
| 191 | {LM3532_ALS_CONFIG, 0x44}, |
| 192 | {LM3532_REG_ZN_0_HI, 0x35}, |
| 193 | {LM3532_REG_ZN_0_LO, 0x33}, |
| 194 | {LM3532_REG_ZN_1_HI, 0x6a}, |
| 195 | {LM3532_REG_ZN_1_LO, 0x66}, |
| 196 | {LM3532_REG_ZN_2_HI, 0xa1}, |
| 197 | {LM3532_REG_ZN_2_LO, 0x99}, |
| 198 | {LM3532_REG_ZN_3_HI, 0xdc}, |
| 199 | {LM3532_REG_ZN_3_LO, 0xcc}, |
| 200 | }; |
| 201 | |
| 202 | static const struct regmap_config lm3532_regmap_config = { |
| 203 | .reg_bits = 8, |
| 204 | .val_bits = 8, |
| 205 | |
| 206 | .max_register = LM3532_REG_MAX, |
| 207 | .reg_defaults = lm3532_reg_defs, |
| 208 | .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs), |
| 209 | .cache_type = REGCACHE_FLAT, |
| 210 | }; |
| 211 | |
Krzysztof Wilczynski | 536129cc | 2019-08-30 20:11:03 +0200 | [diff] [blame] | 212 | static const int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 213 | 92500, 7400, 6170, 5290, |
| 214 | 4630, 4110, 3700, 3360, |
| 215 | 3080, 2850, 2640, 2440, |
| 216 | 2310, 2180, 2060, 1950, |
| 217 | 1850, 1760, 1680, 1610, |
| 218 | 1540, 1480, 1420, 1370, |
| 219 | 1320, 1280, 1230, 1190}; |
| 220 | static int lm3532_get_als_imp_index(int als_imped) |
| 221 | { |
| 222 | int i; |
| 223 | |
| 224 | if (als_imped > als_imp_table[1]) |
| 225 | return 0; |
| 226 | |
| 227 | if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1]) |
| 228 | return LM3532_NUM_IMP_VALS - 1; |
| 229 | |
| 230 | for (i = 1; i < LM3532_NUM_IMP_VALS; i++) { |
| 231 | if (als_imped == als_imp_table[i]) |
| 232 | return i; |
| 233 | |
| 234 | /* Find an approximate index by looking up the table */ |
| 235 | if (als_imped < als_imp_table[i - 1] && |
| 236 | als_imped > als_imp_table[i]) { |
| 237 | if (als_imped - als_imp_table[i - 1] < |
| 238 | als_imp_table[i] - als_imped) |
| 239 | return i + 1; |
| 240 | else |
| 241 | return i; |
| 242 | } |
| 243 | } |
| 244 | |
| 245 | return -EINVAL; |
| 246 | } |
| 247 | |
| 248 | static int lm3532_get_index(const int table[], int size, int value) |
| 249 | { |
| 250 | int i; |
| 251 | |
| 252 | for (i = 1; i < size; i++) { |
| 253 | if (value == table[i]) |
| 254 | return i; |
| 255 | |
| 256 | /* Find an approximate index by looking up the table */ |
| 257 | if (value > table[i - 1] && |
| 258 | value < table[i]) { |
| 259 | if (value - table[i - 1] < table[i] - value) |
| 260 | return i - 1; |
| 261 | else |
| 262 | return i; |
| 263 | } |
| 264 | } |
| 265 | |
| 266 | return -EINVAL; |
| 267 | } |
| 268 | |
Krzysztof Wilczynski | 536129cc | 2019-08-30 20:11:03 +0200 | [diff] [blame] | 269 | static const int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 270 | 1433360, 286720, 573440, |
| 271 | 1146880, 2293760}; |
| 272 | static int lm3532_get_als_avg_index(int avg_time) |
| 273 | { |
| 274 | if (avg_time <= als_avrg_table[0]) |
| 275 | return 0; |
| 276 | |
| 277 | if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1]) |
| 278 | return LM3532_NUM_AVG_VALS - 1; |
| 279 | |
| 280 | return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS, |
| 281 | avg_time); |
| 282 | } |
| 283 | |
Krzysztof Wilczynski | 536129cc | 2019-08-30 20:11:03 +0200 | [diff] [blame] | 284 | static const int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192, |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 285 | 16384, 32768, 65536}; |
| 286 | static int lm3532_get_ramp_index(int ramp_time) |
| 287 | { |
| 288 | if (ramp_time <= ramp_table[0]) |
| 289 | return 0; |
| 290 | |
| 291 | if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1]) |
| 292 | return LM3532_NUM_RAMP_VALS - 1; |
| 293 | |
| 294 | return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS, |
| 295 | ramp_time); |
| 296 | } |
| 297 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 298 | /* Caller must take care of locking */ |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 299 | static int lm3532_led_enable(struct lm3532_led *led_data) |
| 300 | { |
| 301 | int ctrl_en_val = BIT(led_data->control_bank); |
| 302 | int ret; |
| 303 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 304 | if (led_data->enabled) |
| 305 | return 0; |
| 306 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 307 | ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, |
| 308 | ctrl_en_val, ctrl_en_val); |
| 309 | if (ret) { |
| 310 | dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); |
| 311 | return ret; |
| 312 | } |
| 313 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 314 | ret = regulator_enable(led_data->priv->regulator); |
| 315 | if (ret < 0) |
| 316 | return ret; |
| 317 | |
| 318 | led_data->enabled = 1; |
| 319 | |
| 320 | return 0; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 321 | } |
| 322 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 323 | /* Caller must take care of locking */ |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 324 | static int lm3532_led_disable(struct lm3532_led *led_data) |
| 325 | { |
| 326 | int ctrl_en_val = BIT(led_data->control_bank); |
| 327 | int ret; |
| 328 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 329 | if (!led_data->enabled) |
| 330 | return 0; |
| 331 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 332 | ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 333 | ctrl_en_val, 0); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 334 | if (ret) { |
| 335 | dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); |
| 336 | return ret; |
| 337 | } |
| 338 | |
Tony Lindgren | 070a0ee | 2019-08-27 14:52:05 -0700 | [diff] [blame] | 339 | ret = regulator_disable(led_data->priv->regulator); |
| 340 | if (ret < 0) |
| 341 | return ret; |
| 342 | |
| 343 | led_data->enabled = 0; |
| 344 | |
| 345 | return 0; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 346 | } |
| 347 | |
| 348 | static int lm3532_brightness_set(struct led_classdev *led_cdev, |
| 349 | enum led_brightness brt_val) |
| 350 | { |
| 351 | struct lm3532_led *led = |
| 352 | container_of(led_cdev, struct lm3532_led, led_dev); |
| 353 | u8 brightness_reg; |
| 354 | int ret; |
| 355 | |
| 356 | mutex_lock(&led->priv->lock); |
| 357 | |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 358 | if (led->mode == LM3532_ALS_CTRL) { |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 359 | if (brt_val > LED_OFF) |
| 360 | ret = lm3532_led_enable(led); |
| 361 | else |
| 362 | ret = lm3532_led_disable(led); |
| 363 | |
| 364 | goto unlock; |
| 365 | } |
| 366 | |
| 367 | if (brt_val == LED_OFF) { |
| 368 | ret = lm3532_led_disable(led); |
| 369 | goto unlock; |
| 370 | } |
| 371 | |
| 372 | ret = lm3532_led_enable(led); |
| 373 | if (ret) |
| 374 | goto unlock; |
| 375 | |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 376 | brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 + |
| 377 | (led->ctrl_brt_pointer >> 2); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 378 | |
| 379 | ret = regmap_write(led->priv->regmap, brightness_reg, brt_val); |
| 380 | |
| 381 | unlock: |
| 382 | mutex_unlock(&led->priv->lock); |
| 383 | return ret; |
| 384 | } |
| 385 | |
| 386 | static int lm3532_init_registers(struct lm3532_led *led) |
| 387 | { |
| 388 | struct lm3532_data *drvdata = led->priv; |
| 389 | unsigned int runtime_ramp_val; |
| 390 | unsigned int output_cfg_val = 0; |
| 391 | unsigned int output_cfg_shift = 0; |
| 392 | unsigned int output_cfg_mask = 0; |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 393 | unsigned int brightness_config_reg; |
| 394 | unsigned int brightness_config_val; |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 395 | int fs_current_reg; |
| 396 | int fs_current_val; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 397 | int ret, i; |
| 398 | |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 399 | if (drvdata->enable_gpio) |
| 400 | gpiod_direction_output(drvdata->enable_gpio, 1); |
| 401 | |
| 402 | brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2; |
| 403 | /* |
| 404 | * This could be hard coded to the default value but the control |
| 405 | * brightness register may have changed during boot. |
| 406 | */ |
| 407 | ret = regmap_read(drvdata->regmap, brightness_config_reg, |
| 408 | &led->ctrl_brt_pointer); |
| 409 | if (ret) |
| 410 | return ret; |
| 411 | |
| 412 | led->ctrl_brt_pointer &= LM3532_ZONE_MASK; |
| 413 | brightness_config_val = led->ctrl_brt_pointer | led->mode; |
| 414 | ret = regmap_write(drvdata->regmap, brightness_config_reg, |
| 415 | brightness_config_val); |
| 416 | if (ret) |
| 417 | return ret; |
| 418 | |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 419 | if (led->full_scale_current) { |
| 420 | fs_current_reg = LM3532_REG_CTRL_A_FS_CURR + led->control_bank * 2; |
| 421 | fs_current_val = (led->full_scale_current - LM3532_FS_CURR_MIN) / |
| 422 | LM3532_FS_CURR_STEP; |
| 423 | |
| 424 | ret = regmap_write(drvdata->regmap, fs_current_reg, |
| 425 | fs_current_val); |
| 426 | if (ret) |
| 427 | return ret; |
| 428 | } |
| 429 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 430 | for (i = 0; i < led->num_leds; i++) { |
| 431 | output_cfg_shift = led->led_strings[i] * 2; |
| 432 | output_cfg_val |= (led->control_bank << output_cfg_shift); |
| 433 | output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift; |
| 434 | } |
| 435 | |
| 436 | ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG, |
| 437 | output_cfg_mask, output_cfg_val); |
| 438 | if (ret) |
| 439 | return ret; |
| 440 | |
| 441 | runtime_ramp_val = drvdata->runtime_ramp_up | |
| 442 | (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT); |
| 443 | |
| 444 | return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP, |
| 445 | runtime_ramp_val); |
| 446 | } |
| 447 | |
| 448 | static int lm3532_als_configure(struct lm3532_data *priv, |
| 449 | struct lm3532_led *led) |
| 450 | { |
| 451 | struct lm3532_als_data *als = priv->als_data; |
| 452 | u32 als_vmin, als_vmax, als_vstep; |
| 453 | int zone_reg = LM3532_REG_ZN_0_HI; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 454 | int ret; |
| 455 | int i; |
| 456 | |
| 457 | als_vmin = als->als_vmin; |
| 458 | als_vmax = als->als_vmax; |
| 459 | |
| 460 | als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2); |
| 461 | |
| 462 | for (i = 0; i < LM3532_ALS_ZB_MAX; i++) { |
| 463 | als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) * |
| 464 | LED_FULL) / 1000; |
| 465 | als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV + |
| 466 | als_vstep + (i * als_vstep)) * LED_FULL) / 1000; |
| 467 | |
| 468 | zone_reg = LM3532_REG_ZN_0_HI + i * 2; |
| 469 | ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]); |
| 470 | if (ret) |
| 471 | return ret; |
| 472 | |
| 473 | zone_reg += 1; |
| 474 | ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]); |
| 475 | if (ret) |
| 476 | return ret; |
| 477 | } |
| 478 | |
| 479 | als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) | |
| 480 | (als->als_input_mode << LM3532_ALS_SEL_SHIFT)); |
| 481 | |
Dan Murphy | 1312394 | 2019-08-20 14:53:03 -0500 | [diff] [blame] | 482 | return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 483 | } |
| 484 | |
| 485 | static int lm3532_parse_als(struct lm3532_data *priv) |
| 486 | { |
| 487 | struct lm3532_als_data *als; |
| 488 | int als_avg_time; |
| 489 | int als_impedance; |
| 490 | int ret; |
| 491 | |
| 492 | als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL); |
| 493 | if (als == NULL) |
| 494 | return -ENOMEM; |
| 495 | |
| 496 | ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin", |
| 497 | &als->als_vmin); |
| 498 | if (ret) |
| 499 | als->als_vmin = 0; |
| 500 | |
| 501 | ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax", |
| 502 | &als->als_vmax); |
| 503 | if (ret) |
| 504 | als->als_vmax = LM3532_ALS_WINDOW_mV; |
| 505 | |
| 506 | if (als->als_vmax > LM3532_ALS_WINDOW_mV) { |
| 507 | ret = -EINVAL; |
| 508 | return ret; |
| 509 | } |
| 510 | |
| 511 | ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel", |
| 512 | &als_impedance); |
| 513 | if (ret) |
| 514 | als->als1_imp_sel = 0; |
| 515 | else |
| 516 | als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance); |
| 517 | |
| 518 | ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel", |
| 519 | &als_impedance); |
| 520 | if (ret) |
| 521 | als->als2_imp_sel = 0; |
| 522 | else |
| 523 | als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance); |
| 524 | |
| 525 | ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us", |
| 526 | &als_avg_time); |
| 527 | if (ret) |
| 528 | als->als_avrg_time = 0; |
| 529 | else |
| 530 | als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time); |
| 531 | |
| 532 | ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode", |
| 533 | &als->als_input_mode); |
| 534 | if (ret) |
| 535 | als->als_input_mode = 0; |
| 536 | |
| 537 | if (als->als_input_mode > LM3532_BL_MODE_ALS) { |
| 538 | ret = -EINVAL; |
| 539 | return ret; |
| 540 | } |
| 541 | |
| 542 | priv->als_data = als; |
| 543 | |
| 544 | return ret; |
| 545 | } |
| 546 | |
| 547 | static int lm3532_parse_node(struct lm3532_data *priv) |
| 548 | { |
| 549 | struct fwnode_handle *child = NULL; |
| 550 | struct lm3532_led *led; |
| 551 | const char *name; |
| 552 | int control_bank; |
| 553 | u32 ramp_time; |
| 554 | size_t i = 0; |
| 555 | int ret; |
| 556 | |
| 557 | priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, |
| 558 | "enable", GPIOD_OUT_LOW); |
| 559 | if (IS_ERR(priv->enable_gpio)) |
| 560 | priv->enable_gpio = NULL; |
| 561 | |
| 562 | priv->regulator = devm_regulator_get(&priv->client->dev, "vin"); |
| 563 | if (IS_ERR(priv->regulator)) |
| 564 | priv->regulator = NULL; |
| 565 | |
| 566 | ret = device_property_read_u32(&priv->client->dev, "ramp-up-us", |
| 567 | &ramp_time); |
| 568 | if (ret) |
| 569 | dev_info(&priv->client->dev, "ramp-up-ms property missing\n"); |
| 570 | else |
| 571 | priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time); |
| 572 | |
| 573 | ret = device_property_read_u32(&priv->client->dev, "ramp-down-us", |
| 574 | &ramp_time); |
| 575 | if (ret) |
| 576 | dev_info(&priv->client->dev, "ramp-down-ms property missing\n"); |
| 577 | else |
| 578 | priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time); |
| 579 | |
| 580 | device_for_each_child_node(priv->dev, child) { |
Pavel | cf6eb52 | 2019-08-07 12:43:52 +0200 | [diff] [blame] | 581 | struct led_init_data idata = { |
| 582 | .fwnode = child, |
| 583 | .default_label = ":", |
| 584 | .devicename = priv->client->name, |
| 585 | }; |
| 586 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 587 | led = &priv->leds[i]; |
| 588 | |
| 589 | ret = fwnode_property_read_u32(child, "reg", &control_bank); |
| 590 | if (ret) { |
| 591 | dev_err(&priv->client->dev, "reg property missing\n"); |
| 592 | fwnode_handle_put(child); |
| 593 | goto child_out; |
| 594 | } |
| 595 | |
| 596 | if (control_bank > LM3532_CONTROL_C) { |
| 597 | dev_err(&priv->client->dev, "Control bank invalid\n"); |
| 598 | continue; |
| 599 | } |
| 600 | |
| 601 | led->control_bank = control_bank; |
| 602 | |
| 603 | ret = fwnode_property_read_u32(child, "ti,led-mode", |
| 604 | &led->mode); |
| 605 | if (ret) { |
| 606 | dev_err(&priv->client->dev, "ti,led-mode property missing\n"); |
| 607 | fwnode_handle_put(child); |
| 608 | goto child_out; |
| 609 | } |
| 610 | |
Dan Murphy | 6d4faf3 | 2019-09-11 13:27:30 -0500 | [diff] [blame] | 611 | if (fwnode_property_present(child, "led-max-microamp") && |
| 612 | fwnode_property_read_u32(child, "led-max-microamp", |
| 613 | &led->full_scale_current)) |
| 614 | dev_err(&priv->client->dev, |
| 615 | "Failed getting led-max-microamp\n"); |
| 616 | else |
| 617 | led->full_scale_current = min(led->full_scale_current, |
| 618 | LM3532_FS_CURR_MAX); |
Dan Murphy | 517ea49 | 2019-08-20 14:53:07 -0500 | [diff] [blame] | 619 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 620 | if (led->mode == LM3532_BL_MODE_ALS) { |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 621 | led->mode = LM3532_ALS_CTRL; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 622 | ret = lm3532_parse_als(priv); |
| 623 | if (ret) |
| 624 | dev_err(&priv->client->dev, "Failed to parse als\n"); |
| 625 | else |
| 626 | lm3532_als_configure(priv, led); |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 627 | } else { |
| 628 | led->mode = LM3532_I2C_CTRL; |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 629 | } |
| 630 | |
Andy Shevchenko | cc93c86 | 2019-07-23 23:14:57 +0300 | [diff] [blame] | 631 | led->num_leds = fwnode_property_count_u32(child, "led-sources"); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 632 | if (led->num_leds > LM3532_MAX_LED_STRINGS) { |
Pavel | 31e065c | 2020-01-05 23:36:58 +0100 | [diff] [blame] | 633 | dev_err(&priv->client->dev, "Too many LED string defined\n"); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 634 | continue; |
| 635 | } |
| 636 | |
| 637 | ret = fwnode_property_read_u32_array(child, "led-sources", |
| 638 | led->led_strings, |
| 639 | led->num_leds); |
| 640 | if (ret) { |
| 641 | dev_err(&priv->client->dev, "led-sources property missing\n"); |
| 642 | fwnode_handle_put(child); |
| 643 | goto child_out; |
| 644 | } |
| 645 | |
| 646 | fwnode_property_read_string(child, "linux,default-trigger", |
| 647 | &led->led_dev.default_trigger); |
| 648 | |
| 649 | ret = fwnode_property_read_string(child, "label", &name); |
| 650 | if (ret) |
| 651 | snprintf(led->label, sizeof(led->label), |
| 652 | "%s::", priv->client->name); |
| 653 | else |
| 654 | snprintf(led->label, sizeof(led->label), |
| 655 | "%s:%s", priv->client->name, name); |
| 656 | |
| 657 | led->priv = priv; |
| 658 | led->led_dev.name = led->label; |
| 659 | led->led_dev.brightness_set_blocking = lm3532_brightness_set; |
| 660 | |
Pavel | cf6eb52 | 2019-08-07 12:43:52 +0200 | [diff] [blame] | 661 | ret = devm_led_classdev_register_ext(priv->dev, &led->led_dev, &idata); |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 662 | if (ret) { |
| 663 | dev_err(&priv->client->dev, "led register err: %d\n", |
| 664 | ret); |
| 665 | fwnode_handle_put(child); |
| 666 | goto child_out; |
| 667 | } |
| 668 | |
Dan Murphy | 6559ac3 | 2019-08-20 14:53:05 -0500 | [diff] [blame] | 669 | ret = lm3532_init_registers(led); |
| 670 | if (ret) { |
| 671 | dev_err(&priv->client->dev, "register init err: %d\n", |
| 672 | ret); |
| 673 | fwnode_handle_put(child); |
| 674 | goto child_out; |
| 675 | } |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 676 | |
| 677 | i++; |
| 678 | } |
| 679 | |
| 680 | child_out: |
| 681 | return ret; |
| 682 | } |
| 683 | |
| 684 | static int lm3532_probe(struct i2c_client *client, |
| 685 | const struct i2c_device_id *id) |
| 686 | { |
| 687 | struct lm3532_data *drvdata; |
| 688 | int ret = 0; |
| 689 | int count; |
| 690 | |
| 691 | count = device_get_child_node_count(&client->dev); |
| 692 | if (!count) { |
| 693 | dev_err(&client->dev, "LEDs are not defined in device tree!"); |
| 694 | return -ENODEV; |
| 695 | } |
| 696 | |
| 697 | drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count), |
| 698 | GFP_KERNEL); |
| 699 | if (drvdata == NULL) |
| 700 | return -ENOMEM; |
| 701 | |
| 702 | drvdata->client = client; |
| 703 | drvdata->dev = &client->dev; |
| 704 | |
| 705 | drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config); |
| 706 | if (IS_ERR(drvdata->regmap)) { |
| 707 | ret = PTR_ERR(drvdata->regmap); |
| 708 | dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| 709 | ret); |
| 710 | return ret; |
| 711 | } |
| 712 | |
| 713 | mutex_init(&drvdata->lock); |
| 714 | i2c_set_clientdata(client, drvdata); |
| 715 | |
| 716 | ret = lm3532_parse_node(drvdata); |
| 717 | if (ret) { |
| 718 | dev_err(&client->dev, "Failed to parse node\n"); |
| 719 | return ret; |
| 720 | } |
| 721 | |
Dan Murphy | bc1b849 | 2019-03-21 09:28:38 -0500 | [diff] [blame] | 722 | return ret; |
| 723 | } |
| 724 | |
| 725 | static int lm3532_remove(struct i2c_client *client) |
| 726 | { |
| 727 | struct lm3532_data *drvdata = i2c_get_clientdata(client); |
| 728 | |
| 729 | mutex_destroy(&drvdata->lock); |
| 730 | |
| 731 | if (drvdata->enable_gpio) |
| 732 | gpiod_direction_output(drvdata->enable_gpio, 0); |
| 733 | |
| 734 | return 0; |
| 735 | } |
| 736 | |
| 737 | static const struct of_device_id of_lm3532_leds_match[] = { |
| 738 | { .compatible = "ti,lm3532", }, |
| 739 | {}, |
| 740 | }; |
| 741 | MODULE_DEVICE_TABLE(of, of_lm3532_leds_match); |
| 742 | |
| 743 | static const struct i2c_device_id lm3532_id[] = { |
| 744 | {LM3532_NAME, 0}, |
| 745 | {} |
| 746 | }; |
| 747 | MODULE_DEVICE_TABLE(i2c, lm3532_id); |
| 748 | |
| 749 | static struct i2c_driver lm3532_i2c_driver = { |
| 750 | .probe = lm3532_probe, |
| 751 | .remove = lm3532_remove, |
| 752 | .id_table = lm3532_id, |
| 753 | .driver = { |
| 754 | .name = LM3532_NAME, |
| 755 | .of_match_table = of_lm3532_leds_match, |
| 756 | }, |
| 757 | }; |
| 758 | module_i2c_driver(lm3532_i2c_driver); |
| 759 | |
| 760 | MODULE_DESCRIPTION("Back Light driver for LM3532"); |
| 761 | MODULE_LICENSE("GPL v2"); |
| 762 | MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |