Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * usbmidi.c - ALSA USB MIDI driver |
| 3 | * |
| 4 | * Copyright (c) 2002-2005 Clemens Ladisch |
| 5 | * All rights reserved. |
| 6 | * |
| 7 | * Based on the OSS usb-midi driver by NAGANO Daisuke, |
| 8 | * NetBSD's umidi driver by Takuya SHIOZAKI, |
| 9 | * the "USB Device Class Definition for MIDI Devices" by Roland |
| 10 | * |
| 11 | * Redistribution and use in source and binary forms, with or without |
| 12 | * modification, are permitted provided that the following conditions |
| 13 | * are met: |
| 14 | * 1. Redistributions of source code must retain the above copyright |
| 15 | * notice, this list of conditions, and the following disclaimer, |
| 16 | * without modification. |
| 17 | * 2. The name of the author may not be used to endorse or promote products |
| 18 | * derived from this software without specific prior written permission. |
| 19 | * |
| 20 | * Alternatively, this software may be distributed and/or modified under the |
| 21 | * terms of the GNU General Public License as published by the Free Software |
| 22 | * Foundation; either version 2 of the License, or (at your option) any later |
| 23 | * version. |
| 24 | * |
| 25 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| 26 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| 27 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| 28 | * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR |
| 29 | * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 30 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| 31 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| 32 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| 33 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| 34 | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| 35 | * SUCH DAMAGE. |
| 36 | */ |
| 37 | |
| 38 | #include <sound/driver.h> |
| 39 | #include <linux/kernel.h> |
| 40 | #include <linux/types.h> |
| 41 | #include <linux/bitops.h> |
| 42 | #include <linux/interrupt.h> |
| 43 | #include <linux/spinlock.h> |
| 44 | #include <linux/string.h> |
| 45 | #include <linux/init.h> |
| 46 | #include <linux/slab.h> |
| 47 | #include <linux/usb.h> |
| 48 | #include <sound/core.h> |
| 49 | #include <sound/minors.h> |
| 50 | #include <sound/rawmidi.h> |
| 51 | #include "usbaudio.h" |
| 52 | |
| 53 | |
| 54 | /* |
| 55 | * define this to log all USB packets |
| 56 | */ |
| 57 | /* #define DUMP_PACKETS */ |
| 58 | |
| 59 | |
| 60 | MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); |
| 61 | MODULE_DESCRIPTION("USB Audio/MIDI helper module"); |
| 62 | MODULE_LICENSE("Dual BSD/GPL"); |
| 63 | |
| 64 | |
| 65 | struct usb_ms_header_descriptor { |
| 66 | __u8 bLength; |
| 67 | __u8 bDescriptorType; |
| 68 | __u8 bDescriptorSubtype; |
| 69 | __u8 bcdMSC[2]; |
| 70 | __le16 wTotalLength; |
| 71 | } __attribute__ ((packed)); |
| 72 | |
| 73 | struct usb_ms_endpoint_descriptor { |
| 74 | __u8 bLength; |
| 75 | __u8 bDescriptorType; |
| 76 | __u8 bDescriptorSubtype; |
| 77 | __u8 bNumEmbMIDIJack; |
| 78 | __u8 baAssocJackID[0]; |
| 79 | } __attribute__ ((packed)); |
| 80 | |
| 81 | typedef struct snd_usb_midi snd_usb_midi_t; |
| 82 | typedef struct snd_usb_midi_endpoint snd_usb_midi_endpoint_t; |
| 83 | typedef struct snd_usb_midi_out_endpoint snd_usb_midi_out_endpoint_t; |
| 84 | typedef struct snd_usb_midi_in_endpoint snd_usb_midi_in_endpoint_t; |
| 85 | typedef struct usbmidi_out_port usbmidi_out_port_t; |
| 86 | typedef struct usbmidi_in_port usbmidi_in_port_t; |
| 87 | |
| 88 | struct usb_protocol_ops { |
| 89 | void (*input)(snd_usb_midi_in_endpoint_t*, uint8_t*, int); |
| 90 | void (*output)(snd_usb_midi_out_endpoint_t*); |
| 91 | void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t); |
| 92 | void (*init_out_endpoint)(snd_usb_midi_out_endpoint_t*); |
| 93 | void (*finish_out_endpoint)(snd_usb_midi_out_endpoint_t*); |
| 94 | }; |
| 95 | |
| 96 | struct snd_usb_midi { |
| 97 | snd_usb_audio_t *chip; |
| 98 | struct usb_interface *iface; |
| 99 | const snd_usb_audio_quirk_t *quirk; |
| 100 | snd_rawmidi_t* rmidi; |
| 101 | struct usb_protocol_ops* usb_protocol_ops; |
| 102 | struct list_head list; |
| 103 | |
| 104 | struct snd_usb_midi_endpoint { |
| 105 | snd_usb_midi_out_endpoint_t *out; |
| 106 | snd_usb_midi_in_endpoint_t *in; |
| 107 | } endpoints[MIDI_MAX_ENDPOINTS]; |
| 108 | unsigned long input_triggered; |
| 109 | }; |
| 110 | |
| 111 | struct snd_usb_midi_out_endpoint { |
| 112 | snd_usb_midi_t* umidi; |
| 113 | struct urb* urb; |
| 114 | int urb_active; |
| 115 | int max_transfer; /* size of urb buffer */ |
| 116 | struct tasklet_struct tasklet; |
| 117 | |
| 118 | spinlock_t buffer_lock; |
| 119 | |
| 120 | struct usbmidi_out_port { |
| 121 | snd_usb_midi_out_endpoint_t* ep; |
| 122 | snd_rawmidi_substream_t* substream; |
| 123 | int active; |
| 124 | uint8_t cable; /* cable number << 4 */ |
| 125 | uint8_t state; |
| 126 | #define STATE_UNKNOWN 0 |
| 127 | #define STATE_1PARAM 1 |
| 128 | #define STATE_2PARAM_1 2 |
| 129 | #define STATE_2PARAM_2 3 |
| 130 | #define STATE_SYSEX_0 4 |
| 131 | #define STATE_SYSEX_1 5 |
| 132 | #define STATE_SYSEX_2 6 |
| 133 | uint8_t data[2]; |
| 134 | } ports[0x10]; |
| 135 | int current_port; |
| 136 | }; |
| 137 | |
| 138 | struct snd_usb_midi_in_endpoint { |
| 139 | snd_usb_midi_t* umidi; |
| 140 | struct urb* urb; |
| 141 | struct usbmidi_in_port { |
| 142 | snd_rawmidi_substream_t* substream; |
| 143 | } ports[0x10]; |
| 144 | int seen_f5; |
| 145 | int current_port; |
| 146 | }; |
| 147 | |
| 148 | static void snd_usbmidi_do_output(snd_usb_midi_out_endpoint_t* ep); |
| 149 | |
| 150 | static const uint8_t snd_usbmidi_cin_length[] = { |
| 151 | 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 |
| 152 | }; |
| 153 | |
| 154 | /* |
| 155 | * Submits the URB, with error handling. |
| 156 | */ |
| 157 | static int snd_usbmidi_submit_urb(struct urb* urb, int flags) |
| 158 | { |
| 159 | int err = usb_submit_urb(urb, flags); |
| 160 | if (err < 0 && err != -ENODEV) |
| 161 | snd_printk(KERN_ERR "usb_submit_urb: %d\n", err); |
| 162 | return err; |
| 163 | } |
| 164 | |
| 165 | /* |
| 166 | * Error handling for URB completion functions. |
| 167 | */ |
| 168 | static int snd_usbmidi_urb_error(int status) |
| 169 | { |
| 170 | if (status == -ENOENT) |
| 171 | return status; /* killed */ |
| 172 | if (status == -EILSEQ || |
| 173 | status == -ECONNRESET || |
| 174 | status == -ETIMEDOUT) |
| 175 | return -ENODEV; /* device removed/shutdown */ |
| 176 | snd_printk(KERN_ERR "urb status %d\n", status); |
| 177 | return 0; /* continue */ |
| 178 | } |
| 179 | |
| 180 | /* |
| 181 | * Receives a chunk of MIDI data. |
| 182 | */ |
| 183 | static void snd_usbmidi_input_data(snd_usb_midi_in_endpoint_t* ep, int portidx, |
| 184 | uint8_t* data, int length) |
| 185 | { |
| 186 | usbmidi_in_port_t* port = &ep->ports[portidx]; |
| 187 | |
| 188 | if (!port->substream) { |
| 189 | snd_printd("unexpected port %d!\n", portidx); |
| 190 | return; |
| 191 | } |
| 192 | if (!test_bit(port->substream->number, &ep->umidi->input_triggered)) |
| 193 | return; |
| 194 | snd_rawmidi_receive(port->substream, data, length); |
| 195 | } |
| 196 | |
| 197 | #ifdef DUMP_PACKETS |
| 198 | static void dump_urb(const char *type, const u8 *data, int length) |
| 199 | { |
| 200 | snd_printk(KERN_DEBUG "%s packet: [", type); |
| 201 | for (; length > 0; ++data, --length) |
| 202 | printk(" %02x", *data); |
| 203 | printk(" ]\n"); |
| 204 | } |
| 205 | #else |
| 206 | #define dump_urb(type, data, length) /* nothing */ |
| 207 | #endif |
| 208 | |
| 209 | /* |
| 210 | * Processes the data read from the device. |
| 211 | */ |
| 212 | static void snd_usbmidi_in_urb_complete(struct urb* urb, struct pt_regs *regs) |
| 213 | { |
| 214 | snd_usb_midi_in_endpoint_t* ep = urb->context; |
| 215 | |
| 216 | if (urb->status == 0) { |
| 217 | dump_urb("received", urb->transfer_buffer, urb->actual_length); |
| 218 | ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer, |
| 219 | urb->actual_length); |
| 220 | } else { |
| 221 | if (snd_usbmidi_urb_error(urb->status) < 0) |
| 222 | return; |
| 223 | } |
| 224 | |
| 225 | if (usb_pipe_needs_resubmit(urb->pipe)) { |
| 226 | urb->dev = ep->umidi->chip->dev; |
| 227 | snd_usbmidi_submit_urb(urb, GFP_ATOMIC); |
| 228 | } |
| 229 | } |
| 230 | |
| 231 | static void snd_usbmidi_out_urb_complete(struct urb* urb, struct pt_regs *regs) |
| 232 | { |
| 233 | snd_usb_midi_out_endpoint_t* ep = urb->context; |
| 234 | |
| 235 | spin_lock(&ep->buffer_lock); |
| 236 | ep->urb_active = 0; |
| 237 | spin_unlock(&ep->buffer_lock); |
| 238 | if (urb->status < 0) { |
| 239 | if (snd_usbmidi_urb_error(urb->status) < 0) |
| 240 | return; |
| 241 | } |
| 242 | snd_usbmidi_do_output(ep); |
| 243 | } |
| 244 | |
| 245 | /* |
| 246 | * This is called when some data should be transferred to the device |
| 247 | * (from one or more substreams). |
| 248 | */ |
| 249 | static void snd_usbmidi_do_output(snd_usb_midi_out_endpoint_t* ep) |
| 250 | { |
| 251 | struct urb* urb = ep->urb; |
| 252 | unsigned long flags; |
| 253 | |
| 254 | spin_lock_irqsave(&ep->buffer_lock, flags); |
| 255 | if (ep->urb_active || ep->umidi->chip->shutdown) { |
| 256 | spin_unlock_irqrestore(&ep->buffer_lock, flags); |
| 257 | return; |
| 258 | } |
| 259 | |
| 260 | urb->transfer_buffer_length = 0; |
| 261 | ep->umidi->usb_protocol_ops->output(ep); |
| 262 | |
| 263 | if (urb->transfer_buffer_length > 0) { |
| 264 | dump_urb("sending", urb->transfer_buffer, |
| 265 | urb->transfer_buffer_length); |
| 266 | urb->dev = ep->umidi->chip->dev; |
| 267 | ep->urb_active = snd_usbmidi_submit_urb(urb, GFP_ATOMIC) >= 0; |
| 268 | } |
| 269 | spin_unlock_irqrestore(&ep->buffer_lock, flags); |
| 270 | } |
| 271 | |
| 272 | static void snd_usbmidi_out_tasklet(unsigned long data) |
| 273 | { |
| 274 | snd_usb_midi_out_endpoint_t* ep = (snd_usb_midi_out_endpoint_t *) data; |
| 275 | |
| 276 | snd_usbmidi_do_output(ep); |
| 277 | } |
| 278 | |
| 279 | /* helper function to send static data that may not DMA-able */ |
| 280 | static int send_bulk_static_data(snd_usb_midi_out_endpoint_t* ep, |
| 281 | const void *data, int len) |
| 282 | { |
| 283 | int err; |
| 284 | void *buf = kmalloc(len, GFP_KERNEL); |
| 285 | if (!buf) |
| 286 | return -ENOMEM; |
| 287 | memcpy(buf, data, len); |
| 288 | dump_urb("sending", buf, len); |
| 289 | err = usb_bulk_msg(ep->umidi->chip->dev, ep->urb->pipe, buf, len, |
| 290 | NULL, 250); |
| 291 | kfree(buf); |
| 292 | return err; |
| 293 | } |
| 294 | |
| 295 | /* |
| 296 | * Standard USB MIDI protocol: see the spec. |
| 297 | * Midiman protocol: like the standard protocol, but the control byte is the |
| 298 | * fourth byte in each packet, and uses length instead of CIN. |
| 299 | */ |
| 300 | |
| 301 | static void snd_usbmidi_standard_input(snd_usb_midi_in_endpoint_t* ep, |
| 302 | uint8_t* buffer, int buffer_length) |
| 303 | { |
| 304 | int i; |
| 305 | |
| 306 | for (i = 0; i + 3 < buffer_length; i += 4) |
| 307 | if (buffer[i] != 0) { |
| 308 | int cable = buffer[i] >> 4; |
| 309 | int length = snd_usbmidi_cin_length[buffer[i] & 0x0f]; |
| 310 | snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length); |
| 311 | } |
| 312 | } |
| 313 | |
| 314 | static void snd_usbmidi_midiman_input(snd_usb_midi_in_endpoint_t* ep, |
| 315 | uint8_t* buffer, int buffer_length) |
| 316 | { |
| 317 | int i; |
| 318 | |
| 319 | for (i = 0; i + 3 < buffer_length; i += 4) |
| 320 | if (buffer[i + 3] != 0) { |
| 321 | int port = buffer[i + 3] >> 4; |
| 322 | int length = buffer[i + 3] & 3; |
| 323 | snd_usbmidi_input_data(ep, port, &buffer[i], length); |
| 324 | } |
| 325 | } |
| 326 | |
| 327 | /* |
| 328 | * Adds one USB MIDI packet to the output buffer. |
| 329 | */ |
| 330 | static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0, |
| 331 | uint8_t p1, uint8_t p2, uint8_t p3) |
| 332 | { |
| 333 | |
| 334 | uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; |
| 335 | buf[0] = p0; |
| 336 | buf[1] = p1; |
| 337 | buf[2] = p2; |
| 338 | buf[3] = p3; |
| 339 | urb->transfer_buffer_length += 4; |
| 340 | } |
| 341 | |
| 342 | /* |
| 343 | * Adds one Midiman packet to the output buffer. |
| 344 | */ |
| 345 | static void snd_usbmidi_output_midiman_packet(struct urb* urb, uint8_t p0, |
| 346 | uint8_t p1, uint8_t p2, uint8_t p3) |
| 347 | { |
| 348 | |
| 349 | uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; |
| 350 | buf[0] = p1; |
| 351 | buf[1] = p2; |
| 352 | buf[2] = p3; |
| 353 | buf[3] = (p0 & 0xf0) | snd_usbmidi_cin_length[p0 & 0x0f]; |
| 354 | urb->transfer_buffer_length += 4; |
| 355 | } |
| 356 | |
| 357 | /* |
| 358 | * Converts MIDI commands to USB MIDI packets. |
| 359 | */ |
| 360 | static void snd_usbmidi_transmit_byte(usbmidi_out_port_t* port, |
| 361 | uint8_t b, struct urb* urb) |
| 362 | { |
| 363 | uint8_t p0 = port->cable; |
| 364 | void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t) = |
| 365 | port->ep->umidi->usb_protocol_ops->output_packet; |
| 366 | |
| 367 | if (b >= 0xf8) { |
| 368 | output_packet(urb, p0 | 0x0f, b, 0, 0); |
| 369 | } else if (b >= 0xf0) { |
| 370 | switch (b) { |
| 371 | case 0xf0: |
| 372 | port->data[0] = b; |
| 373 | port->state = STATE_SYSEX_1; |
| 374 | break; |
| 375 | case 0xf1: |
| 376 | case 0xf3: |
| 377 | port->data[0] = b; |
| 378 | port->state = STATE_1PARAM; |
| 379 | break; |
| 380 | case 0xf2: |
| 381 | port->data[0] = b; |
| 382 | port->state = STATE_2PARAM_1; |
| 383 | break; |
| 384 | case 0xf4: |
| 385 | case 0xf5: |
| 386 | port->state = STATE_UNKNOWN; |
| 387 | break; |
| 388 | case 0xf6: |
| 389 | output_packet(urb, p0 | 0x05, 0xf6, 0, 0); |
| 390 | port->state = STATE_UNKNOWN; |
| 391 | break; |
| 392 | case 0xf7: |
| 393 | switch (port->state) { |
| 394 | case STATE_SYSEX_0: |
| 395 | output_packet(urb, p0 | 0x05, 0xf7, 0, 0); |
| 396 | break; |
| 397 | case STATE_SYSEX_1: |
| 398 | output_packet(urb, p0 | 0x06, port->data[0], 0xf7, 0); |
| 399 | break; |
| 400 | case STATE_SYSEX_2: |
| 401 | output_packet(urb, p0 | 0x07, port->data[0], port->data[1], 0xf7); |
| 402 | break; |
| 403 | } |
| 404 | port->state = STATE_UNKNOWN; |
| 405 | break; |
| 406 | } |
| 407 | } else if (b >= 0x80) { |
| 408 | port->data[0] = b; |
| 409 | if (b >= 0xc0 && b <= 0xdf) |
| 410 | port->state = STATE_1PARAM; |
| 411 | else |
| 412 | port->state = STATE_2PARAM_1; |
| 413 | } else { /* b < 0x80 */ |
| 414 | switch (port->state) { |
| 415 | case STATE_1PARAM: |
| 416 | if (port->data[0] < 0xf0) { |
| 417 | p0 |= port->data[0] >> 4; |
| 418 | } else { |
| 419 | p0 |= 0x02; |
| 420 | port->state = STATE_UNKNOWN; |
| 421 | } |
| 422 | output_packet(urb, p0, port->data[0], b, 0); |
| 423 | break; |
| 424 | case STATE_2PARAM_1: |
| 425 | port->data[1] = b; |
| 426 | port->state = STATE_2PARAM_2; |
| 427 | break; |
| 428 | case STATE_2PARAM_2: |
| 429 | if (port->data[0] < 0xf0) { |
| 430 | p0 |= port->data[0] >> 4; |
| 431 | port->state = STATE_2PARAM_1; |
| 432 | } else { |
| 433 | p0 |= 0x03; |
| 434 | port->state = STATE_UNKNOWN; |
| 435 | } |
| 436 | output_packet(urb, p0, port->data[0], port->data[1], b); |
| 437 | break; |
| 438 | case STATE_SYSEX_0: |
| 439 | port->data[0] = b; |
| 440 | port->state = STATE_SYSEX_1; |
| 441 | break; |
| 442 | case STATE_SYSEX_1: |
| 443 | port->data[1] = b; |
| 444 | port->state = STATE_SYSEX_2; |
| 445 | break; |
| 446 | case STATE_SYSEX_2: |
| 447 | output_packet(urb, p0 | 0x04, port->data[0], port->data[1], b); |
| 448 | port->state = STATE_SYSEX_0; |
| 449 | break; |
| 450 | } |
| 451 | } |
| 452 | } |
| 453 | |
| 454 | static void snd_usbmidi_standard_output(snd_usb_midi_out_endpoint_t* ep) |
| 455 | { |
| 456 | struct urb* urb = ep->urb; |
| 457 | int p; |
| 458 | |
| 459 | /* FIXME: lower-numbered ports can starve higher-numbered ports */ |
| 460 | for (p = 0; p < 0x10; ++p) { |
| 461 | usbmidi_out_port_t* port = &ep->ports[p]; |
| 462 | if (!port->active) |
| 463 | continue; |
| 464 | while (urb->transfer_buffer_length + 3 < ep->max_transfer) { |
| 465 | uint8_t b; |
| 466 | if (snd_rawmidi_transmit(port->substream, &b, 1) != 1) { |
| 467 | port->active = 0; |
| 468 | break; |
| 469 | } |
| 470 | snd_usbmidi_transmit_byte(port, b, urb); |
| 471 | } |
| 472 | } |
| 473 | } |
| 474 | |
| 475 | static struct usb_protocol_ops snd_usbmidi_standard_ops = { |
| 476 | .input = snd_usbmidi_standard_input, |
| 477 | .output = snd_usbmidi_standard_output, |
| 478 | .output_packet = snd_usbmidi_output_standard_packet, |
| 479 | }; |
| 480 | |
| 481 | static struct usb_protocol_ops snd_usbmidi_midiman_ops = { |
| 482 | .input = snd_usbmidi_midiman_input, |
| 483 | .output = snd_usbmidi_standard_output, |
| 484 | .output_packet = snd_usbmidi_output_midiman_packet, |
| 485 | }; |
| 486 | |
| 487 | /* |
| 488 | * Novation USB MIDI protocol: number of data bytes is in the first byte |
| 489 | * (when receiving) (+1!) or in the second byte (when sending); data begins |
| 490 | * at the third byte. |
| 491 | */ |
| 492 | |
| 493 | static void snd_usbmidi_novation_input(snd_usb_midi_in_endpoint_t* ep, |
| 494 | uint8_t* buffer, int buffer_length) |
| 495 | { |
| 496 | if (buffer_length < 2 || !buffer[0] || buffer_length < buffer[0] + 1) |
| 497 | return; |
| 498 | snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1); |
| 499 | } |
| 500 | |
| 501 | static void snd_usbmidi_novation_output(snd_usb_midi_out_endpoint_t* ep) |
| 502 | { |
| 503 | uint8_t* transfer_buffer; |
| 504 | int count; |
| 505 | |
| 506 | if (!ep->ports[0].active) |
| 507 | return; |
| 508 | transfer_buffer = ep->urb->transfer_buffer; |
| 509 | count = snd_rawmidi_transmit(ep->ports[0].substream, |
| 510 | &transfer_buffer[2], |
| 511 | ep->max_transfer - 2); |
| 512 | if (count < 1) { |
| 513 | ep->ports[0].active = 0; |
| 514 | return; |
| 515 | } |
| 516 | transfer_buffer[0] = 0; |
| 517 | transfer_buffer[1] = count; |
| 518 | ep->urb->transfer_buffer_length = 2 + count; |
| 519 | } |
| 520 | |
| 521 | static struct usb_protocol_ops snd_usbmidi_novation_ops = { |
| 522 | .input = snd_usbmidi_novation_input, |
| 523 | .output = snd_usbmidi_novation_output, |
| 524 | }; |
| 525 | |
| 526 | /* |
| 527 | * Mark of the Unicorn USB MIDI protocol: raw MIDI. |
| 528 | */ |
| 529 | |
| 530 | static void snd_usbmidi_motu_input(snd_usb_midi_in_endpoint_t* ep, |
| 531 | uint8_t* buffer, int buffer_length) |
| 532 | { |
| 533 | snd_usbmidi_input_data(ep, 0, buffer, buffer_length); |
| 534 | } |
| 535 | |
| 536 | static void snd_usbmidi_motu_output(snd_usb_midi_out_endpoint_t* ep) |
| 537 | { |
| 538 | int count; |
| 539 | |
| 540 | if (!ep->ports[0].active) |
| 541 | return; |
| 542 | count = snd_rawmidi_transmit(ep->ports[0].substream, |
| 543 | ep->urb->transfer_buffer, |
| 544 | ep->max_transfer); |
| 545 | if (count < 1) { |
| 546 | ep->ports[0].active = 0; |
| 547 | return; |
| 548 | } |
| 549 | ep->urb->transfer_buffer_length = count; |
| 550 | } |
| 551 | |
| 552 | static struct usb_protocol_ops snd_usbmidi_motu_ops = { |
| 553 | .input = snd_usbmidi_motu_input, |
| 554 | .output = snd_usbmidi_motu_output, |
| 555 | }; |
| 556 | |
| 557 | /* |
| 558 | * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching. |
| 559 | */ |
| 560 | |
| 561 | static void snd_usbmidi_emagic_init_out(snd_usb_midi_out_endpoint_t* ep) |
| 562 | { |
| 563 | static const u8 init_data[] = { |
| 564 | /* initialization magic: "get version" */ |
| 565 | 0xf0, |
| 566 | 0x00, 0x20, 0x31, /* Emagic */ |
| 567 | 0x64, /* Unitor8 */ |
| 568 | 0x0b, /* version number request */ |
| 569 | 0x00, /* command version */ |
| 570 | 0x00, /* EEPROM, box 0 */ |
| 571 | 0xf7 |
| 572 | }; |
| 573 | send_bulk_static_data(ep, init_data, sizeof(init_data)); |
| 574 | /* while we're at it, pour on more magic */ |
| 575 | send_bulk_static_data(ep, init_data, sizeof(init_data)); |
| 576 | } |
| 577 | |
| 578 | static void snd_usbmidi_emagic_finish_out(snd_usb_midi_out_endpoint_t* ep) |
| 579 | { |
| 580 | static const u8 finish_data[] = { |
| 581 | /* switch to patch mode with last preset */ |
| 582 | 0xf0, |
| 583 | 0x00, 0x20, 0x31, /* Emagic */ |
| 584 | 0x64, /* Unitor8 */ |
| 585 | 0x10, /* patch switch command */ |
| 586 | 0x00, /* command version */ |
| 587 | 0x7f, /* to all boxes */ |
| 588 | 0x40, /* last preset in EEPROM */ |
| 589 | 0xf7 |
| 590 | }; |
| 591 | send_bulk_static_data(ep, finish_data, sizeof(finish_data)); |
| 592 | } |
| 593 | |
| 594 | static void snd_usbmidi_emagic_input(snd_usb_midi_in_endpoint_t* ep, |
| 595 | uint8_t* buffer, int buffer_length) |
| 596 | { |
| 597 | /* ignore padding bytes at end of buffer */ |
| 598 | while (buffer_length > 0 && buffer[buffer_length - 1] == 0xff) |
| 599 | --buffer_length; |
| 600 | |
| 601 | /* handle F5 at end of last buffer */ |
| 602 | if (ep->seen_f5) |
| 603 | goto switch_port; |
| 604 | |
| 605 | while (buffer_length > 0) { |
| 606 | int i; |
| 607 | |
| 608 | /* determine size of data until next F5 */ |
| 609 | for (i = 0; i < buffer_length; ++i) |
| 610 | if (buffer[i] == 0xf5) |
| 611 | break; |
| 612 | snd_usbmidi_input_data(ep, ep->current_port, buffer, i); |
| 613 | buffer += i; |
| 614 | buffer_length -= i; |
| 615 | |
| 616 | if (buffer_length <= 0) |
| 617 | break; |
| 618 | /* assert(buffer[0] == 0xf5); */ |
| 619 | ep->seen_f5 = 1; |
| 620 | ++buffer; |
| 621 | --buffer_length; |
| 622 | |
| 623 | switch_port: |
| 624 | if (buffer_length <= 0) |
| 625 | break; |
| 626 | if (buffer[0] < 0x80) { |
| 627 | ep->current_port = (buffer[0] - 1) & 15; |
| 628 | ++buffer; |
| 629 | --buffer_length; |
| 630 | } |
| 631 | ep->seen_f5 = 0; |
| 632 | } |
| 633 | } |
| 634 | |
| 635 | static void snd_usbmidi_emagic_output(snd_usb_midi_out_endpoint_t* ep) |
| 636 | { |
| 637 | int port0 = ep->current_port; |
| 638 | uint8_t* buf = ep->urb->transfer_buffer; |
| 639 | int buf_free = ep->max_transfer; |
| 640 | int length, i; |
| 641 | |
| 642 | for (i = 0; i < 0x10; ++i) { |
| 643 | /* round-robin, starting at the last current port */ |
| 644 | int portnum = (port0 + i) & 15; |
| 645 | usbmidi_out_port_t* port = &ep->ports[portnum]; |
| 646 | |
| 647 | if (!port->active) |
| 648 | continue; |
| 649 | if (snd_rawmidi_transmit_peek(port->substream, buf, 1) != 1) { |
| 650 | port->active = 0; |
| 651 | continue; |
| 652 | } |
| 653 | |
| 654 | if (portnum != ep->current_port) { |
| 655 | if (buf_free < 2) |
| 656 | break; |
| 657 | ep->current_port = portnum; |
| 658 | buf[0] = 0xf5; |
| 659 | buf[1] = (portnum + 1) & 15; |
| 660 | buf += 2; |
| 661 | buf_free -= 2; |
| 662 | } |
| 663 | |
| 664 | if (buf_free < 1) |
| 665 | break; |
| 666 | length = snd_rawmidi_transmit(port->substream, buf, buf_free); |
| 667 | if (length > 0) { |
| 668 | buf += length; |
| 669 | buf_free -= length; |
| 670 | if (buf_free < 1) |
| 671 | break; |
| 672 | } |
| 673 | } |
| 674 | ep->urb->transfer_buffer_length = ep->max_transfer - buf_free; |
| 675 | } |
| 676 | |
| 677 | static struct usb_protocol_ops snd_usbmidi_emagic_ops = { |
| 678 | .input = snd_usbmidi_emagic_input, |
| 679 | .output = snd_usbmidi_emagic_output, |
| 680 | .init_out_endpoint = snd_usbmidi_emagic_init_out, |
| 681 | .finish_out_endpoint = snd_usbmidi_emagic_finish_out, |
| 682 | }; |
| 683 | |
| 684 | |
| 685 | static int snd_usbmidi_output_open(snd_rawmidi_substream_t* substream) |
| 686 | { |
| 687 | snd_usb_midi_t* umidi = substream->rmidi->private_data; |
| 688 | usbmidi_out_port_t* port = NULL; |
| 689 | int i, j; |
| 690 | |
| 691 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| 692 | if (umidi->endpoints[i].out) |
| 693 | for (j = 0; j < 0x10; ++j) |
| 694 | if (umidi->endpoints[i].out->ports[j].substream == substream) { |
| 695 | port = &umidi->endpoints[i].out->ports[j]; |
| 696 | break; |
| 697 | } |
| 698 | if (!port) { |
| 699 | snd_BUG(); |
| 700 | return -ENXIO; |
| 701 | } |
| 702 | substream->runtime->private_data = port; |
| 703 | port->state = STATE_UNKNOWN; |
| 704 | return 0; |
| 705 | } |
| 706 | |
| 707 | static int snd_usbmidi_output_close(snd_rawmidi_substream_t* substream) |
| 708 | { |
| 709 | return 0; |
| 710 | } |
| 711 | |
| 712 | static void snd_usbmidi_output_trigger(snd_rawmidi_substream_t* substream, int up) |
| 713 | { |
| 714 | usbmidi_out_port_t* port = (usbmidi_out_port_t*)substream->runtime->private_data; |
| 715 | |
| 716 | port->active = up; |
| 717 | if (up) { |
| 718 | if (port->ep->umidi->chip->shutdown) { |
| 719 | /* gobble up remaining bytes to prevent wait in |
| 720 | * snd_rawmidi_drain_output */ |
| 721 | while (!snd_rawmidi_transmit_empty(substream)) |
| 722 | snd_rawmidi_transmit_ack(substream, 1); |
| 723 | return; |
| 724 | } |
| 725 | tasklet_hi_schedule(&port->ep->tasklet); |
| 726 | } |
| 727 | } |
| 728 | |
| 729 | static int snd_usbmidi_input_open(snd_rawmidi_substream_t* substream) |
| 730 | { |
| 731 | return 0; |
| 732 | } |
| 733 | |
| 734 | static int snd_usbmidi_input_close(snd_rawmidi_substream_t* substream) |
| 735 | { |
| 736 | return 0; |
| 737 | } |
| 738 | |
| 739 | static void snd_usbmidi_input_trigger(snd_rawmidi_substream_t* substream, int up) |
| 740 | { |
| 741 | snd_usb_midi_t* umidi = substream->rmidi->private_data; |
| 742 | |
| 743 | if (up) |
| 744 | set_bit(substream->number, &umidi->input_triggered); |
| 745 | else |
| 746 | clear_bit(substream->number, &umidi->input_triggered); |
| 747 | } |
| 748 | |
| 749 | static snd_rawmidi_ops_t snd_usbmidi_output_ops = { |
| 750 | .open = snd_usbmidi_output_open, |
| 751 | .close = snd_usbmidi_output_close, |
| 752 | .trigger = snd_usbmidi_output_trigger, |
| 753 | }; |
| 754 | |
| 755 | static snd_rawmidi_ops_t snd_usbmidi_input_ops = { |
| 756 | .open = snd_usbmidi_input_open, |
| 757 | .close = snd_usbmidi_input_close, |
| 758 | .trigger = snd_usbmidi_input_trigger |
| 759 | }; |
| 760 | |
| 761 | /* |
| 762 | * Frees an input endpoint. |
| 763 | * May be called when ep hasn't been initialized completely. |
| 764 | */ |
| 765 | static void snd_usbmidi_in_endpoint_delete(snd_usb_midi_in_endpoint_t* ep) |
| 766 | { |
| 767 | if (ep->urb) { |
| 768 | kfree(ep->urb->transfer_buffer); |
| 769 | usb_free_urb(ep->urb); |
| 770 | } |
| 771 | kfree(ep); |
| 772 | } |
| 773 | |
| 774 | /* |
| 775 | * Creates an input endpoint. |
| 776 | */ |
| 777 | static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, |
| 778 | snd_usb_midi_endpoint_info_t* ep_info, |
| 779 | snd_usb_midi_endpoint_t* rep) |
| 780 | { |
| 781 | snd_usb_midi_in_endpoint_t* ep; |
| 782 | void* buffer; |
| 783 | unsigned int pipe; |
| 784 | int length; |
| 785 | |
| 786 | rep->in = NULL; |
| 787 | ep = kcalloc(1, sizeof(*ep), GFP_KERNEL); |
| 788 | if (!ep) |
| 789 | return -ENOMEM; |
| 790 | ep->umidi = umidi; |
| 791 | |
| 792 | ep->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 793 | if (!ep->urb) { |
| 794 | snd_usbmidi_in_endpoint_delete(ep); |
| 795 | return -ENOMEM; |
| 796 | } |
| 797 | if (ep_info->in_interval) |
| 798 | pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep); |
| 799 | else |
| 800 | pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep); |
| 801 | length = usb_maxpacket(umidi->chip->dev, pipe, 0); |
| 802 | buffer = kmalloc(length, GFP_KERNEL); |
| 803 | if (!buffer) { |
| 804 | snd_usbmidi_in_endpoint_delete(ep); |
| 805 | return -ENOMEM; |
| 806 | } |
| 807 | if (ep_info->in_interval) |
| 808 | usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer, length, |
| 809 | snd_usb_complete_callback(snd_usbmidi_in_urb_complete), |
| 810 | ep, ep_info->in_interval); |
| 811 | else |
| 812 | usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, length, |
| 813 | snd_usb_complete_callback(snd_usbmidi_in_urb_complete), |
| 814 | ep); |
| 815 | |
| 816 | rep->in = ep; |
| 817 | return 0; |
| 818 | } |
| 819 | |
| 820 | static unsigned int snd_usbmidi_count_bits(unsigned int x) |
| 821 | { |
| 822 | unsigned int bits = 0; |
| 823 | |
| 824 | for (; x; x >>= 1) |
| 825 | bits += x & 1; |
| 826 | return bits; |
| 827 | } |
| 828 | |
| 829 | /* |
| 830 | * Frees an output endpoint. |
| 831 | * May be called when ep hasn't been initialized completely. |
| 832 | */ |
| 833 | static void snd_usbmidi_out_endpoint_delete(snd_usb_midi_out_endpoint_t* ep) |
| 834 | { |
| 835 | if (ep->tasklet.func) |
| 836 | tasklet_kill(&ep->tasklet); |
| 837 | if (ep->urb) { |
| 838 | kfree(ep->urb->transfer_buffer); |
| 839 | usb_free_urb(ep->urb); |
| 840 | } |
| 841 | kfree(ep); |
| 842 | } |
| 843 | |
| 844 | /* |
| 845 | * Creates an output endpoint, and initializes output ports. |
| 846 | */ |
| 847 | static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, |
| 848 | snd_usb_midi_endpoint_info_t* ep_info, |
| 849 | snd_usb_midi_endpoint_t* rep) |
| 850 | { |
| 851 | snd_usb_midi_out_endpoint_t* ep; |
| 852 | int i; |
| 853 | unsigned int pipe; |
| 854 | void* buffer; |
| 855 | |
| 856 | rep->out = NULL; |
| 857 | ep = kcalloc(1, sizeof(*ep), GFP_KERNEL); |
| 858 | if (!ep) |
| 859 | return -ENOMEM; |
| 860 | ep->umidi = umidi; |
| 861 | |
| 862 | ep->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 863 | if (!ep->urb) { |
| 864 | snd_usbmidi_out_endpoint_delete(ep); |
| 865 | return -ENOMEM; |
| 866 | } |
| 867 | /* we never use interrupt output pipes */ |
| 868 | pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep); |
| 869 | ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1); |
| 870 | buffer = kmalloc(ep->max_transfer, GFP_KERNEL); |
| 871 | if (!buffer) { |
| 872 | snd_usbmidi_out_endpoint_delete(ep); |
| 873 | return -ENOMEM; |
| 874 | } |
| 875 | usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, |
| 876 | ep->max_transfer, |
| 877 | snd_usb_complete_callback(snd_usbmidi_out_urb_complete), ep); |
| 878 | |
| 879 | spin_lock_init(&ep->buffer_lock); |
| 880 | tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep); |
| 881 | |
| 882 | for (i = 0; i < 0x10; ++i) |
| 883 | if (ep_info->out_cables & (1 << i)) { |
| 884 | ep->ports[i].ep = ep; |
| 885 | ep->ports[i].cable = i << 4; |
| 886 | } |
| 887 | |
| 888 | if (umidi->usb_protocol_ops->init_out_endpoint) |
| 889 | umidi->usb_protocol_ops->init_out_endpoint(ep); |
| 890 | |
| 891 | rep->out = ep; |
| 892 | return 0; |
| 893 | } |
| 894 | |
| 895 | /* |
| 896 | * Frees everything. |
| 897 | */ |
| 898 | static void snd_usbmidi_free(snd_usb_midi_t* umidi) |
| 899 | { |
| 900 | int i; |
| 901 | |
| 902 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 903 | snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| 904 | if (ep->out) |
| 905 | snd_usbmidi_out_endpoint_delete(ep->out); |
| 906 | if (ep->in) |
| 907 | snd_usbmidi_in_endpoint_delete(ep->in); |
| 908 | } |
| 909 | kfree(umidi); |
| 910 | } |
| 911 | |
| 912 | /* |
| 913 | * Unlinks all URBs (must be done before the usb_device is deleted). |
| 914 | */ |
Clemens Ladisch | ee73339 | 2005-04-25 10:34:13 +0200 | [diff] [blame] | 915 | void snd_usbmidi_disconnect(struct list_head* p) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 916 | { |
| 917 | snd_usb_midi_t* umidi; |
| 918 | int i; |
| 919 | |
| 920 | umidi = list_entry(p, snd_usb_midi_t, list); |
| 921 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 922 | snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| 923 | if (ep->out && ep->out->urb) { |
| 924 | usb_kill_urb(ep->out->urb); |
| 925 | if (umidi->usb_protocol_ops->finish_out_endpoint) |
| 926 | umidi->usb_protocol_ops->finish_out_endpoint(ep->out); |
| 927 | } |
| 928 | if (ep->in && ep->in->urb) |
| 929 | usb_kill_urb(ep->in->urb); |
| 930 | } |
| 931 | } |
| 932 | |
| 933 | static void snd_usbmidi_rawmidi_free(snd_rawmidi_t* rmidi) |
| 934 | { |
| 935 | snd_usb_midi_t* umidi = rmidi->private_data; |
| 936 | snd_usbmidi_free(umidi); |
| 937 | } |
| 938 | |
| 939 | static snd_rawmidi_substream_t* snd_usbmidi_find_substream(snd_usb_midi_t* umidi, |
| 940 | int stream, int number) |
| 941 | { |
| 942 | struct list_head* list; |
| 943 | |
| 944 | list_for_each(list, &umidi->rmidi->streams[stream].substreams) { |
| 945 | snd_rawmidi_substream_t* substream = list_entry(list, snd_rawmidi_substream_t, list); |
| 946 | if (substream->number == number) |
| 947 | return substream; |
| 948 | } |
| 949 | return NULL; |
| 950 | } |
| 951 | |
| 952 | /* |
| 953 | * This list specifies names for ports that do not fit into the standard |
| 954 | * "(product) MIDI (n)" schema because they aren't external MIDI ports, |
| 955 | * such as internal control or synthesizer ports. |
| 956 | */ |
| 957 | static struct { |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 958 | u32 id; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 959 | int port; |
| 960 | const char *name_format; |
| 961 | } snd_usbmidi_port_names[] = { |
| 962 | /* Roland UA-100 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 963 | { USB_ID(0x0582, 0x0000), 2, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 964 | /* Roland SC-8850 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 965 | { USB_ID(0x0582, 0x0003), 0, "%s Part A" }, |
| 966 | { USB_ID(0x0582, 0x0003), 1, "%s Part B" }, |
| 967 | { USB_ID(0x0582, 0x0003), 2, "%s Part C" }, |
| 968 | { USB_ID(0x0582, 0x0003), 3, "%s Part D" }, |
| 969 | { USB_ID(0x0582, 0x0003), 4, "%s MIDI 1" }, |
| 970 | { USB_ID(0x0582, 0x0003), 5, "%s MIDI 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 971 | /* Roland U-8 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 972 | { USB_ID(0x0582, 0x0004), 0, "%s MIDI" }, |
| 973 | { USB_ID(0x0582, 0x0004), 1, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 974 | /* Roland SC-8820 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 975 | { USB_ID(0x0582, 0x0007), 0, "%s Part A" }, |
| 976 | { USB_ID(0x0582, 0x0007), 1, "%s Part B" }, |
| 977 | { USB_ID(0x0582, 0x0007), 2, "%s MIDI" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 978 | /* Roland SK-500 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 979 | { USB_ID(0x0582, 0x000b), 0, "%s Part A" }, |
| 980 | { USB_ID(0x0582, 0x000b), 1, "%s Part B" }, |
| 981 | { USB_ID(0x0582, 0x000b), 2, "%s MIDI" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 982 | /* Roland SC-D70 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 983 | { USB_ID(0x0582, 0x000c), 0, "%s Part A" }, |
| 984 | { USB_ID(0x0582, 0x000c), 1, "%s Part B" }, |
| 985 | { USB_ID(0x0582, 0x000c), 2, "%s MIDI" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 986 | /* Edirol UM-880 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 987 | { USB_ID(0x0582, 0x0014), 8, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 988 | /* Edirol SD-90 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 989 | { USB_ID(0x0582, 0x0016), 0, "%s Part A" }, |
| 990 | { USB_ID(0x0582, 0x0016), 1, "%s Part B" }, |
| 991 | { USB_ID(0x0582, 0x0016), 2, "%s MIDI 1" }, |
| 992 | { USB_ID(0x0582, 0x0016), 3, "%s MIDI 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 993 | /* Edirol UM-550 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 994 | { USB_ID(0x0582, 0x0023), 5, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 995 | /* Edirol SD-20 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 996 | { USB_ID(0x0582, 0x0027), 0, "%s Part A" }, |
| 997 | { USB_ID(0x0582, 0x0027), 1, "%s Part B" }, |
| 998 | { USB_ID(0x0582, 0x0027), 2, "%s MIDI" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 999 | /* Edirol SD-80 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1000 | { USB_ID(0x0582, 0x0029), 0, "%s Part A" }, |
| 1001 | { USB_ID(0x0582, 0x0029), 1, "%s Part B" }, |
| 1002 | { USB_ID(0x0582, 0x0029), 2, "%s MIDI 1" }, |
| 1003 | { USB_ID(0x0582, 0x0029), 3, "%s MIDI 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1004 | /* Edirol UA-700 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1005 | { USB_ID(0x0582, 0x002b), 0, "%s MIDI" }, |
| 1006 | { USB_ID(0x0582, 0x002b), 1, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1007 | /* Roland VariOS */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1008 | { USB_ID(0x0582, 0x002f), 0, "%s MIDI" }, |
| 1009 | { USB_ID(0x0582, 0x002f), 1, "%s External MIDI" }, |
| 1010 | { USB_ID(0x0582, 0x002f), 2, "%s Sync" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1011 | /* Edirol PCR */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1012 | { USB_ID(0x0582, 0x0033), 0, "%s MIDI" }, |
| 1013 | { USB_ID(0x0582, 0x0033), 1, "%s 1" }, |
| 1014 | { USB_ID(0x0582, 0x0033), 2, "%s 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1015 | /* BOSS GS-10 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1016 | { USB_ID(0x0582, 0x003b), 0, "%s MIDI" }, |
| 1017 | { USB_ID(0x0582, 0x003b), 1, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1018 | /* Edirol UA-1000 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1019 | { USB_ID(0x0582, 0x0044), 0, "%s MIDI" }, |
| 1020 | { USB_ID(0x0582, 0x0044), 1, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1021 | /* Edirol UR-80 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1022 | { USB_ID(0x0582, 0x0048), 0, "%s MIDI" }, |
| 1023 | { USB_ID(0x0582, 0x0048), 1, "%s 1" }, |
| 1024 | { USB_ID(0x0582, 0x0048), 2, "%s 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1025 | /* Edirol PCR-A */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1026 | { USB_ID(0x0582, 0x004d), 0, "%s MIDI" }, |
| 1027 | { USB_ID(0x0582, 0x004d), 1, "%s 1" }, |
| 1028 | { USB_ID(0x0582, 0x004d), 2, "%s 2" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1029 | /* M-Audio MidiSport 8x8 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1030 | { USB_ID(0x0763, 0x1031), 8, "%s Control" }, |
| 1031 | { USB_ID(0x0763, 0x1033), 8, "%s Control" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1032 | /* MOTU Fastlane */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1033 | { USB_ID(0x07fd, 0x0001), 0, "%s MIDI A" }, |
| 1034 | { USB_ID(0x07fd, 0x0001), 1, "%s MIDI B" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1035 | /* Emagic Unitor8/AMT8/MT4 */ |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1036 | { USB_ID(0x086a, 0x0001), 8, "%s Broadcast" }, |
| 1037 | { USB_ID(0x086a, 0x0002), 8, "%s Broadcast" }, |
| 1038 | { USB_ID(0x086a, 0x0003), 4, "%s Broadcast" }, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1039 | }; |
| 1040 | |
| 1041 | static void snd_usbmidi_init_substream(snd_usb_midi_t* umidi, |
| 1042 | int stream, int number, |
| 1043 | snd_rawmidi_substream_t** rsubstream) |
| 1044 | { |
| 1045 | int i; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1046 | const char *name_format; |
| 1047 | |
| 1048 | snd_rawmidi_substream_t* substream = snd_usbmidi_find_substream(umidi, stream, number); |
| 1049 | if (!substream) { |
| 1050 | snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number); |
| 1051 | return; |
| 1052 | } |
| 1053 | |
| 1054 | /* TODO: read port name from jack descriptor */ |
| 1055 | name_format = "%s MIDI %d"; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1056 | for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_names); ++i) { |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1057 | if (snd_usbmidi_port_names[i].id == umidi->chip->usb_id && |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1058 | snd_usbmidi_port_names[i].port == number) { |
| 1059 | name_format = snd_usbmidi_port_names[i].name_format; |
| 1060 | break; |
| 1061 | } |
| 1062 | } |
| 1063 | snprintf(substream->name, sizeof(substream->name), |
| 1064 | name_format, umidi->chip->card->shortname, number + 1); |
| 1065 | |
| 1066 | *rsubstream = substream; |
| 1067 | } |
| 1068 | |
| 1069 | /* |
| 1070 | * Creates the endpoints and their ports. |
| 1071 | */ |
| 1072 | static int snd_usbmidi_create_endpoints(snd_usb_midi_t* umidi, |
| 1073 | snd_usb_midi_endpoint_info_t* endpoints) |
| 1074 | { |
| 1075 | int i, j, err; |
| 1076 | int out_ports = 0, in_ports = 0; |
| 1077 | |
| 1078 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 1079 | if (endpoints[i].out_cables) { |
| 1080 | err = snd_usbmidi_out_endpoint_create(umidi, &endpoints[i], |
| 1081 | &umidi->endpoints[i]); |
| 1082 | if (err < 0) |
| 1083 | return err; |
| 1084 | } |
| 1085 | if (endpoints[i].in_cables) { |
| 1086 | err = snd_usbmidi_in_endpoint_create(umidi, &endpoints[i], |
| 1087 | &umidi->endpoints[i]); |
| 1088 | if (err < 0) |
| 1089 | return err; |
| 1090 | } |
| 1091 | |
| 1092 | for (j = 0; j < 0x10; ++j) { |
| 1093 | if (endpoints[i].out_cables & (1 << j)) { |
| 1094 | snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, out_ports, |
| 1095 | &umidi->endpoints[i].out->ports[j].substream); |
| 1096 | ++out_ports; |
| 1097 | } |
| 1098 | if (endpoints[i].in_cables & (1 << j)) { |
| 1099 | snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, in_ports, |
| 1100 | &umidi->endpoints[i].in->ports[j].substream); |
| 1101 | ++in_ports; |
| 1102 | } |
| 1103 | } |
| 1104 | } |
| 1105 | snd_printdd(KERN_INFO "created %d output and %d input ports\n", |
| 1106 | out_ports, in_ports); |
| 1107 | return 0; |
| 1108 | } |
| 1109 | |
| 1110 | /* |
| 1111 | * Returns MIDIStreaming device capabilities. |
| 1112 | */ |
| 1113 | static int snd_usbmidi_get_ms_info(snd_usb_midi_t* umidi, |
| 1114 | snd_usb_midi_endpoint_info_t* endpoints) |
| 1115 | { |
| 1116 | struct usb_interface* intf; |
| 1117 | struct usb_host_interface *hostif; |
| 1118 | struct usb_interface_descriptor* intfd; |
| 1119 | struct usb_ms_header_descriptor* ms_header; |
| 1120 | struct usb_host_endpoint *hostep; |
| 1121 | struct usb_endpoint_descriptor* ep; |
| 1122 | struct usb_ms_endpoint_descriptor* ms_ep; |
| 1123 | int i, epidx; |
| 1124 | |
| 1125 | intf = umidi->iface; |
| 1126 | if (!intf) |
| 1127 | return -ENXIO; |
| 1128 | hostif = &intf->altsetting[0]; |
| 1129 | intfd = get_iface_desc(hostif); |
| 1130 | ms_header = (struct usb_ms_header_descriptor*)hostif->extra; |
| 1131 | if (hostif->extralen >= 7 && |
| 1132 | ms_header->bLength >= 7 && |
| 1133 | ms_header->bDescriptorType == USB_DT_CS_INTERFACE && |
| 1134 | ms_header->bDescriptorSubtype == HEADER) |
| 1135 | snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n", |
| 1136 | ms_header->bcdMSC[1], ms_header->bcdMSC[0]); |
| 1137 | else |
| 1138 | snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n"); |
| 1139 | |
| 1140 | epidx = 0; |
| 1141 | for (i = 0; i < intfd->bNumEndpoints; ++i) { |
| 1142 | hostep = &hostif->endpoint[i]; |
| 1143 | ep = get_ep_desc(hostep); |
| 1144 | if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && |
| 1145 | (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| 1146 | continue; |
| 1147 | ms_ep = (struct usb_ms_endpoint_descriptor*)hostep->extra; |
| 1148 | if (hostep->extralen < 4 || |
| 1149 | ms_ep->bLength < 4 || |
| 1150 | ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT || |
| 1151 | ms_ep->bDescriptorSubtype != MS_GENERAL) |
| 1152 | continue; |
| 1153 | if ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { |
| 1154 | if (endpoints[epidx].out_ep) { |
| 1155 | if (++epidx >= MIDI_MAX_ENDPOINTS) { |
| 1156 | snd_printk(KERN_WARNING "too many endpoints\n"); |
| 1157 | break; |
| 1158 | } |
| 1159 | } |
| 1160 | endpoints[epidx].out_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1161 | if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| 1162 | endpoints[epidx].out_interval = ep->bInterval; |
| 1163 | endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; |
| 1164 | snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", |
| 1165 | ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); |
| 1166 | } else { |
| 1167 | if (endpoints[epidx].in_ep) { |
| 1168 | if (++epidx >= MIDI_MAX_ENDPOINTS) { |
| 1169 | snd_printk(KERN_WARNING "too many endpoints\n"); |
| 1170 | break; |
| 1171 | } |
| 1172 | } |
| 1173 | endpoints[epidx].in_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1174 | if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| 1175 | endpoints[epidx].in_interval = ep->bInterval; |
| 1176 | endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; |
| 1177 | snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", |
| 1178 | ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); |
| 1179 | } |
| 1180 | } |
| 1181 | return 0; |
| 1182 | } |
| 1183 | |
| 1184 | /* |
| 1185 | * On Roland devices, use the second alternate setting to be able to use |
| 1186 | * the interrupt input endpoint. |
| 1187 | */ |
| 1188 | static void snd_usbmidi_switch_roland_altsetting(snd_usb_midi_t* umidi) |
| 1189 | { |
| 1190 | struct usb_interface* intf; |
| 1191 | struct usb_host_interface *hostif; |
| 1192 | struct usb_interface_descriptor* intfd; |
| 1193 | |
| 1194 | intf = umidi->iface; |
| 1195 | if (!intf || intf->num_altsetting != 2) |
| 1196 | return; |
| 1197 | |
| 1198 | hostif = &intf->altsetting[1]; |
| 1199 | intfd = get_iface_desc(hostif); |
| 1200 | if (intfd->bNumEndpoints != 2 || |
| 1201 | (get_endpoint(hostif, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK || |
| 1202 | (get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| 1203 | return; |
| 1204 | |
| 1205 | snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n", |
| 1206 | intfd->bAlternateSetting); |
| 1207 | usb_set_interface(umidi->chip->dev, intfd->bInterfaceNumber, |
| 1208 | intfd->bAlternateSetting); |
| 1209 | } |
| 1210 | |
| 1211 | /* |
| 1212 | * Try to find any usable endpoints in the interface. |
| 1213 | */ |
| 1214 | static int snd_usbmidi_detect_endpoints(snd_usb_midi_t* umidi, |
| 1215 | snd_usb_midi_endpoint_info_t* endpoint, |
| 1216 | int max_endpoints) |
| 1217 | { |
| 1218 | struct usb_interface* intf; |
| 1219 | struct usb_host_interface *hostif; |
| 1220 | struct usb_interface_descriptor* intfd; |
| 1221 | struct usb_endpoint_descriptor* epd; |
| 1222 | int i, out_eps = 0, in_eps = 0; |
| 1223 | |
Clemens Ladisch | 27d10f5 | 2005-05-02 08:51:26 +0200 | [diff] [blame^] | 1224 | if (USB_ID_VENDOR(umidi->chip->usb_id) == 0x0582) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1225 | snd_usbmidi_switch_roland_altsetting(umidi); |
| 1226 | |
Clemens Ladisch | c1ab5d5 | 2005-03-30 16:22:01 +0200 | [diff] [blame] | 1227 | if (endpoint[0].out_ep || endpoint[0].in_ep) |
| 1228 | return 0; |
| 1229 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1230 | intf = umidi->iface; |
| 1231 | if (!intf || intf->num_altsetting < 1) |
| 1232 | return -ENOENT; |
| 1233 | hostif = intf->cur_altsetting; |
| 1234 | intfd = get_iface_desc(hostif); |
| 1235 | |
| 1236 | for (i = 0; i < intfd->bNumEndpoints; ++i) { |
| 1237 | epd = get_endpoint(hostif, i); |
| 1238 | if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && |
| 1239 | (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| 1240 | continue; |
| 1241 | if (out_eps < max_endpoints && |
| 1242 | (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { |
| 1243 | endpoint[out_eps].out_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1244 | if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| 1245 | endpoint[out_eps].out_interval = epd->bInterval; |
| 1246 | ++out_eps; |
| 1247 | } |
| 1248 | if (in_eps < max_endpoints && |
| 1249 | (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { |
| 1250 | endpoint[in_eps].in_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1251 | if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| 1252 | endpoint[in_eps].in_interval = epd->bInterval; |
| 1253 | ++in_eps; |
| 1254 | } |
| 1255 | } |
| 1256 | return (out_eps || in_eps) ? 0 : -ENOENT; |
| 1257 | } |
| 1258 | |
| 1259 | /* |
| 1260 | * Detects the endpoints for one-port-per-endpoint protocols. |
| 1261 | */ |
| 1262 | static int snd_usbmidi_detect_per_port_endpoints(snd_usb_midi_t* umidi, |
| 1263 | snd_usb_midi_endpoint_info_t* endpoints) |
| 1264 | { |
| 1265 | int err, i; |
| 1266 | |
| 1267 | err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS); |
| 1268 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 1269 | if (endpoints[i].out_ep) |
| 1270 | endpoints[i].out_cables = 0x0001; |
| 1271 | if (endpoints[i].in_ep) |
| 1272 | endpoints[i].in_cables = 0x0001; |
| 1273 | } |
| 1274 | return err; |
| 1275 | } |
| 1276 | |
| 1277 | /* |
| 1278 | * Detects the endpoints and ports of Yamaha devices. |
| 1279 | */ |
| 1280 | static int snd_usbmidi_detect_yamaha(snd_usb_midi_t* umidi, |
| 1281 | snd_usb_midi_endpoint_info_t* endpoint) |
| 1282 | { |
| 1283 | struct usb_interface* intf; |
| 1284 | struct usb_host_interface *hostif; |
| 1285 | struct usb_interface_descriptor* intfd; |
| 1286 | uint8_t* cs_desc; |
| 1287 | |
| 1288 | intf = umidi->iface; |
| 1289 | if (!intf) |
| 1290 | return -ENOENT; |
| 1291 | hostif = intf->altsetting; |
| 1292 | intfd = get_iface_desc(hostif); |
| 1293 | if (intfd->bNumEndpoints < 1) |
| 1294 | return -ENOENT; |
| 1295 | |
| 1296 | /* |
| 1297 | * For each port there is one MIDI_IN/OUT_JACK descriptor, not |
| 1298 | * necessarily with any useful contents. So simply count 'em. |
| 1299 | */ |
| 1300 | for (cs_desc = hostif->extra; |
| 1301 | cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2; |
| 1302 | cs_desc += cs_desc[0]) { |
| 1303 | if (cs_desc[1] == CS_AUDIO_INTERFACE) { |
| 1304 | if (cs_desc[2] == MIDI_IN_JACK) |
| 1305 | endpoint->in_cables = (endpoint->in_cables << 1) | 1; |
| 1306 | else if (cs_desc[2] == MIDI_OUT_JACK) |
| 1307 | endpoint->out_cables = (endpoint->out_cables << 1) | 1; |
| 1308 | } |
| 1309 | } |
| 1310 | if (!endpoint->in_cables && !endpoint->out_cables) |
| 1311 | return -ENOENT; |
| 1312 | |
| 1313 | return snd_usbmidi_detect_endpoints(umidi, endpoint, 1); |
| 1314 | } |
| 1315 | |
| 1316 | /* |
| 1317 | * Creates the endpoints and their ports for Midiman devices. |
| 1318 | */ |
| 1319 | static int snd_usbmidi_create_endpoints_midiman(snd_usb_midi_t* umidi, |
| 1320 | snd_usb_midi_endpoint_info_t* endpoint) |
| 1321 | { |
| 1322 | snd_usb_midi_endpoint_info_t ep_info; |
| 1323 | struct usb_interface* intf; |
| 1324 | struct usb_host_interface *hostif; |
| 1325 | struct usb_interface_descriptor* intfd; |
| 1326 | struct usb_endpoint_descriptor* epd; |
| 1327 | int cable, err; |
| 1328 | |
| 1329 | intf = umidi->iface; |
| 1330 | if (!intf) |
| 1331 | return -ENOENT; |
| 1332 | hostif = intf->altsetting; |
| 1333 | intfd = get_iface_desc(hostif); |
| 1334 | /* |
| 1335 | * The various MidiSport devices have more or less random endpoint |
| 1336 | * numbers, so we have to identify the endpoints by their index in |
| 1337 | * the descriptor array, like the driver for that other OS does. |
| 1338 | * |
| 1339 | * There is one interrupt input endpoint for all input ports, one |
| 1340 | * bulk output endpoint for even-numbered ports, and one for odd- |
| 1341 | * numbered ports. Both bulk output endpoints have corresponding |
| 1342 | * input bulk endpoints (at indices 1 and 3) which aren't used. |
| 1343 | */ |
| 1344 | if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) { |
| 1345 | snd_printdd(KERN_ERR "not enough endpoints\n"); |
| 1346 | return -ENOENT; |
| 1347 | } |
| 1348 | |
| 1349 | epd = get_endpoint(hostif, 0); |
| 1350 | if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_IN || |
| 1351 | (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { |
| 1352 | snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n"); |
| 1353 | return -ENXIO; |
| 1354 | } |
| 1355 | epd = get_endpoint(hostif, 2); |
| 1356 | if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || |
| 1357 | (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { |
| 1358 | snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n"); |
| 1359 | return -ENXIO; |
| 1360 | } |
| 1361 | if (endpoint->out_cables > 0x0001) { |
| 1362 | epd = get_endpoint(hostif, 4); |
| 1363 | if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || |
| 1364 | (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { |
| 1365 | snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n"); |
| 1366 | return -ENXIO; |
| 1367 | } |
| 1368 | } |
| 1369 | |
| 1370 | ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1371 | ep_info.out_cables = endpoint->out_cables & 0x5555; |
| 1372 | err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); |
| 1373 | if (err < 0) |
| 1374 | return err; |
| 1375 | |
| 1376 | ep_info.in_ep = get_endpoint(hostif, 0)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1377 | ep_info.in_interval = get_endpoint(hostif, 0)->bInterval; |
| 1378 | ep_info.in_cables = endpoint->in_cables; |
| 1379 | err = snd_usbmidi_in_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); |
| 1380 | if (err < 0) |
| 1381 | return err; |
| 1382 | |
| 1383 | if (endpoint->out_cables > 0x0001) { |
| 1384 | ep_info.out_ep = get_endpoint(hostif, 4)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 1385 | ep_info.out_cables = endpoint->out_cables & 0xaaaa; |
| 1386 | err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[1]); |
| 1387 | if (err < 0) |
| 1388 | return err; |
| 1389 | } |
| 1390 | |
| 1391 | for (cable = 0; cable < 0x10; ++cable) { |
| 1392 | if (endpoint->out_cables & (1 << cable)) |
| 1393 | snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, cable, |
| 1394 | &umidi->endpoints[cable & 1].out->ports[cable].substream); |
| 1395 | if (endpoint->in_cables & (1 << cable)) |
| 1396 | snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, cable, |
| 1397 | &umidi->endpoints[0].in->ports[cable].substream); |
| 1398 | } |
| 1399 | return 0; |
| 1400 | } |
| 1401 | |
| 1402 | static int snd_usbmidi_create_rawmidi(snd_usb_midi_t* umidi, |
| 1403 | int out_ports, int in_ports) |
| 1404 | { |
| 1405 | snd_rawmidi_t* rmidi; |
| 1406 | int err; |
| 1407 | |
| 1408 | err = snd_rawmidi_new(umidi->chip->card, "USB MIDI", |
| 1409 | umidi->chip->next_midi_device++, |
| 1410 | out_ports, in_ports, &rmidi); |
| 1411 | if (err < 0) |
| 1412 | return err; |
| 1413 | strcpy(rmidi->name, umidi->chip->card->shortname); |
| 1414 | rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | |
| 1415 | SNDRV_RAWMIDI_INFO_INPUT | |
| 1416 | SNDRV_RAWMIDI_INFO_DUPLEX; |
| 1417 | rmidi->private_data = umidi; |
| 1418 | rmidi->private_free = snd_usbmidi_rawmidi_free; |
| 1419 | snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_usbmidi_output_ops); |
| 1420 | snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_usbmidi_input_ops); |
| 1421 | |
| 1422 | umidi->rmidi = rmidi; |
| 1423 | return 0; |
| 1424 | } |
| 1425 | |
| 1426 | /* |
| 1427 | * Temporarily stop input. |
| 1428 | */ |
| 1429 | void snd_usbmidi_input_stop(struct list_head* p) |
| 1430 | { |
| 1431 | snd_usb_midi_t* umidi; |
| 1432 | int i; |
| 1433 | |
| 1434 | umidi = list_entry(p, snd_usb_midi_t, list); |
| 1435 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 1436 | snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| 1437 | if (ep->in) |
| 1438 | usb_kill_urb(ep->in->urb); |
| 1439 | } |
| 1440 | } |
| 1441 | |
| 1442 | static void snd_usbmidi_input_start_ep(snd_usb_midi_in_endpoint_t* ep) |
| 1443 | { |
| 1444 | if (ep) { |
| 1445 | struct urb* urb = ep->urb; |
| 1446 | urb->dev = ep->umidi->chip->dev; |
| 1447 | snd_usbmidi_submit_urb(urb, GFP_KERNEL); |
| 1448 | } |
| 1449 | } |
| 1450 | |
| 1451 | /* |
| 1452 | * Resume input after a call to snd_usbmidi_input_stop(). |
| 1453 | */ |
| 1454 | void snd_usbmidi_input_start(struct list_head* p) |
| 1455 | { |
| 1456 | snd_usb_midi_t* umidi; |
| 1457 | int i; |
| 1458 | |
| 1459 | umidi = list_entry(p, snd_usb_midi_t, list); |
| 1460 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| 1461 | snd_usbmidi_input_start_ep(umidi->endpoints[i].in); |
| 1462 | } |
| 1463 | |
| 1464 | /* |
| 1465 | * Creates and registers everything needed for a MIDI streaming interface. |
| 1466 | */ |
| 1467 | int snd_usb_create_midi_interface(snd_usb_audio_t* chip, |
| 1468 | struct usb_interface* iface, |
| 1469 | const snd_usb_audio_quirk_t* quirk) |
| 1470 | { |
| 1471 | snd_usb_midi_t* umidi; |
| 1472 | snd_usb_midi_endpoint_info_t endpoints[MIDI_MAX_ENDPOINTS]; |
| 1473 | int out_ports, in_ports; |
| 1474 | int i, err; |
| 1475 | |
| 1476 | umidi = kcalloc(1, sizeof(*umidi), GFP_KERNEL); |
| 1477 | if (!umidi) |
| 1478 | return -ENOMEM; |
| 1479 | umidi->chip = chip; |
| 1480 | umidi->iface = iface; |
| 1481 | umidi->quirk = quirk; |
| 1482 | umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; |
| 1483 | |
| 1484 | /* detect the endpoint(s) to use */ |
| 1485 | memset(endpoints, 0, sizeof(endpoints)); |
| 1486 | if (!quirk) { |
| 1487 | err = snd_usbmidi_get_ms_info(umidi, endpoints); |
| 1488 | } else { |
| 1489 | switch (quirk->type) { |
| 1490 | case QUIRK_MIDI_FIXED_ENDPOINT: |
| 1491 | memcpy(&endpoints[0], quirk->data, |
| 1492 | sizeof(snd_usb_midi_endpoint_info_t)); |
| 1493 | err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); |
| 1494 | break; |
| 1495 | case QUIRK_MIDI_YAMAHA: |
| 1496 | err = snd_usbmidi_detect_yamaha(umidi, &endpoints[0]); |
| 1497 | break; |
| 1498 | case QUIRK_MIDI_MIDIMAN: |
| 1499 | umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops; |
| 1500 | memcpy(&endpoints[0], quirk->data, |
| 1501 | sizeof(snd_usb_midi_endpoint_info_t)); |
| 1502 | err = 0; |
| 1503 | break; |
| 1504 | case QUIRK_MIDI_NOVATION: |
| 1505 | umidi->usb_protocol_ops = &snd_usbmidi_novation_ops; |
| 1506 | err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); |
| 1507 | break; |
| 1508 | case QUIRK_MIDI_MOTU: |
| 1509 | umidi->usb_protocol_ops = &snd_usbmidi_motu_ops; |
| 1510 | err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); |
| 1511 | break; |
| 1512 | case QUIRK_MIDI_EMAGIC: |
| 1513 | umidi->usb_protocol_ops = &snd_usbmidi_emagic_ops; |
| 1514 | memcpy(&endpoints[0], quirk->data, |
| 1515 | sizeof(snd_usb_midi_endpoint_info_t)); |
| 1516 | err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); |
| 1517 | break; |
| 1518 | default: |
| 1519 | snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); |
| 1520 | err = -ENXIO; |
| 1521 | break; |
| 1522 | } |
| 1523 | } |
| 1524 | if (err < 0) { |
| 1525 | kfree(umidi); |
| 1526 | return err; |
| 1527 | } |
| 1528 | |
| 1529 | /* create rawmidi device */ |
| 1530 | out_ports = 0; |
| 1531 | in_ports = 0; |
| 1532 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| 1533 | out_ports += snd_usbmidi_count_bits(endpoints[i].out_cables); |
| 1534 | in_ports += snd_usbmidi_count_bits(endpoints[i].in_cables); |
| 1535 | } |
| 1536 | err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports); |
| 1537 | if (err < 0) { |
| 1538 | kfree(umidi); |
| 1539 | return err; |
| 1540 | } |
| 1541 | |
| 1542 | /* create endpoint/port structures */ |
| 1543 | if (quirk && quirk->type == QUIRK_MIDI_MIDIMAN) |
| 1544 | err = snd_usbmidi_create_endpoints_midiman(umidi, &endpoints[0]); |
| 1545 | else |
| 1546 | err = snd_usbmidi_create_endpoints(umidi, endpoints); |
| 1547 | if (err < 0) { |
| 1548 | snd_usbmidi_free(umidi); |
| 1549 | return err; |
| 1550 | } |
| 1551 | |
| 1552 | list_add(&umidi->list, &umidi->chip->midi_list); |
| 1553 | |
| 1554 | for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| 1555 | snd_usbmidi_input_start_ep(umidi->endpoints[i].in); |
| 1556 | return 0; |
| 1557 | } |
| 1558 | |
| 1559 | EXPORT_SYMBOL(snd_usb_create_midi_interface); |
| 1560 | EXPORT_SYMBOL(snd_usbmidi_input_stop); |
| 1561 | EXPORT_SYMBOL(snd_usbmidi_input_start); |
| 1562 | EXPORT_SYMBOL(snd_usbmidi_disconnect); |