Andy Shevchenko | 0f04a81 | 2020-04-07 20:38:49 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* MCP23S08 I2C GPIO driver */ |
| 3 | |
| 4 | #include <linux/i2c.h> |
| 5 | #include <linux/mod_devicetable.h> |
| 6 | #include <linux/module.h> |
| 7 | #include <linux/regmap.h> |
| 8 | |
| 9 | #include "pinctrl-mcp23s08.h" |
| 10 | |
| 11 | static int mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| 12 | { |
| 13 | struct device *dev = &client->dev; |
| 14 | unsigned int type = id->driver_data; |
| 15 | struct mcp23s08 *mcp; |
| 16 | int ret; |
| 17 | |
| 18 | mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL); |
| 19 | if (!mcp) |
| 20 | return -ENOMEM; |
| 21 | |
| 22 | switch (type) { |
| 23 | case MCP_TYPE_008: |
| 24 | mcp->regmap = devm_regmap_init_i2c(client, &mcp23x08_regmap); |
| 25 | mcp->reg_shift = 0; |
| 26 | mcp->chip.ngpio = 8; |
| 27 | mcp->chip.label = "mcp23008"; |
| 28 | break; |
| 29 | |
| 30 | case MCP_TYPE_017: |
| 31 | mcp->regmap = devm_regmap_init_i2c(client, &mcp23x17_regmap); |
| 32 | mcp->reg_shift = 1; |
| 33 | mcp->chip.ngpio = 16; |
| 34 | mcp->chip.label = "mcp23017"; |
| 35 | break; |
| 36 | |
| 37 | case MCP_TYPE_018: |
| 38 | mcp->regmap = devm_regmap_init_i2c(client, &mcp23x17_regmap); |
| 39 | mcp->reg_shift = 1; |
| 40 | mcp->chip.ngpio = 16; |
| 41 | mcp->chip.label = "mcp23018"; |
| 42 | break; |
| 43 | |
| 44 | default: |
| 45 | dev_err(dev, "invalid device type (%d)\n", type); |
| 46 | return -EINVAL; |
| 47 | } |
| 48 | |
| 49 | if (IS_ERR(mcp->regmap)) |
| 50 | return PTR_ERR(mcp->regmap); |
| 51 | |
| 52 | mcp->irq = client->irq; |
| 53 | mcp->pinctrl_desc.name = "mcp23xxx-pinctrl"; |
| 54 | |
| 55 | ret = mcp23s08_probe_one(mcp, dev, client->addr, type, -1); |
| 56 | if (ret) |
| 57 | return ret; |
| 58 | |
| 59 | i2c_set_clientdata(client, mcp); |
| 60 | |
| 61 | return 0; |
| 62 | } |
| 63 | |
| 64 | static const struct i2c_device_id mcp230xx_id[] = { |
| 65 | { "mcp23008", MCP_TYPE_008 }, |
| 66 | { "mcp23017", MCP_TYPE_017 }, |
| 67 | { "mcp23018", MCP_TYPE_018 }, |
| 68 | { } |
| 69 | }; |
| 70 | MODULE_DEVICE_TABLE(i2c, mcp230xx_id); |
| 71 | |
| 72 | static const struct of_device_id mcp23s08_i2c_of_match[] = { |
| 73 | { |
| 74 | .compatible = "microchip,mcp23008", |
| 75 | .data = (void *) MCP_TYPE_008, |
| 76 | }, |
| 77 | { |
| 78 | .compatible = "microchip,mcp23017", |
| 79 | .data = (void *) MCP_TYPE_017, |
| 80 | }, |
| 81 | { |
| 82 | .compatible = "microchip,mcp23018", |
| 83 | .data = (void *) MCP_TYPE_018, |
| 84 | }, |
| 85 | /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ |
| 86 | { |
| 87 | .compatible = "mcp,mcp23008", |
| 88 | .data = (void *) MCP_TYPE_008, |
| 89 | }, |
| 90 | { |
| 91 | .compatible = "mcp,mcp23017", |
| 92 | .data = (void *) MCP_TYPE_017, |
| 93 | }, |
| 94 | { } |
| 95 | }; |
| 96 | MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); |
| 97 | |
| 98 | static struct i2c_driver mcp230xx_driver = { |
| 99 | .driver = { |
| 100 | .name = "mcp230xx", |
| 101 | .of_match_table = mcp23s08_i2c_of_match, |
| 102 | }, |
| 103 | .probe = mcp230xx_probe, |
| 104 | .id_table = mcp230xx_id, |
| 105 | }; |
| 106 | |
| 107 | static int __init mcp23s08_i2c_init(void) |
| 108 | { |
| 109 | return i2c_add_driver(&mcp230xx_driver); |
| 110 | } |
| 111 | |
| 112 | /* |
| 113 | * Register after I²C postcore initcall and before |
| 114 | * subsys initcalls that may rely on these GPIOs. |
| 115 | */ |
| 116 | subsys_initcall(mcp23s08_i2c_init); |
| 117 | |
| 118 | static void mcp23s08_i2c_exit(void) |
| 119 | { |
| 120 | i2c_del_driver(&mcp230xx_driver); |
| 121 | } |
| 122 | module_exit(mcp23s08_i2c_exit); |
| 123 | |
| 124 | MODULE_LICENSE("GPL"); |