Paul Mackerras | 14cf11a | 2005-09-26 16:04:21 +1000 | [diff] [blame^] | 1 | /* |
| 2 | * PowerPC version |
| 3 | * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| 4 | * |
| 5 | * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| 6 | * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| 7 | * Copyright (C) 1996 Paul Mackerras |
| 8 | * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). |
| 9 | * |
| 10 | * Derived from "arch/i386/mm/init.c" |
| 11 | * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| 12 | * |
| 13 | * Dave Engebretsen <engebret@us.ibm.com> |
| 14 | * Rework for PPC64 port. |
| 15 | * |
| 16 | * This program is free software; you can redistribute it and/or |
| 17 | * modify it under the terms of the GNU General Public License |
| 18 | * as published by the Free Software Foundation; either version |
| 19 | * 2 of the License, or (at your option) any later version. |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | #include <linux/config.h> |
| 24 | #include <linux/signal.h> |
| 25 | #include <linux/sched.h> |
| 26 | #include <linux/kernel.h> |
| 27 | #include <linux/errno.h> |
| 28 | #include <linux/string.h> |
| 29 | #include <linux/types.h> |
| 30 | #include <linux/mman.h> |
| 31 | #include <linux/mm.h> |
| 32 | #include <linux/swap.h> |
| 33 | #include <linux/stddef.h> |
| 34 | #include <linux/vmalloc.h> |
| 35 | #include <linux/init.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <linux/bootmem.h> |
| 38 | #include <linux/highmem.h> |
| 39 | #include <linux/idr.h> |
| 40 | #include <linux/nodemask.h> |
| 41 | #include <linux/module.h> |
| 42 | |
| 43 | #include <asm/pgalloc.h> |
| 44 | #include <asm/page.h> |
| 45 | #include <asm/prom.h> |
| 46 | #include <asm/lmb.h> |
| 47 | #include <asm/rtas.h> |
| 48 | #include <asm/io.h> |
| 49 | #include <asm/mmu_context.h> |
| 50 | #include <asm/pgtable.h> |
| 51 | #include <asm/mmu.h> |
| 52 | #include <asm/uaccess.h> |
| 53 | #include <asm/smp.h> |
| 54 | #include <asm/machdep.h> |
| 55 | #include <asm/tlb.h> |
| 56 | #include <asm/eeh.h> |
| 57 | #include <asm/processor.h> |
| 58 | #include <asm/mmzone.h> |
| 59 | #include <asm/cputable.h> |
| 60 | #include <asm/ppcdebug.h> |
| 61 | #include <asm/sections.h> |
| 62 | #include <asm/system.h> |
| 63 | #include <asm/iommu.h> |
| 64 | #include <asm/abs_addr.h> |
| 65 | #include <asm/vdso.h> |
| 66 | #include <asm/imalloc.h> |
| 67 | |
| 68 | #if PGTABLE_RANGE > USER_VSID_RANGE |
| 69 | #warning Limited user VSID range means pagetable space is wasted |
| 70 | #endif |
| 71 | |
| 72 | #if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE) |
| 73 | #warning TASK_SIZE is smaller than it needs to be. |
| 74 | #endif |
| 75 | |
| 76 | int mem_init_done; |
| 77 | unsigned long ioremap_bot = IMALLOC_BASE; |
| 78 | static unsigned long phbs_io_bot = PHBS_IO_BASE; |
| 79 | |
| 80 | extern pgd_t swapper_pg_dir[]; |
| 81 | extern struct task_struct *current_set[NR_CPUS]; |
| 82 | |
| 83 | unsigned long klimit = (unsigned long)_end; |
| 84 | |
| 85 | unsigned long _SDR1=0; |
| 86 | unsigned long _ASR=0; |
| 87 | |
| 88 | /* max amount of RAM to use */ |
| 89 | unsigned long __max_memory; |
| 90 | |
| 91 | /* info on what we think the IO hole is */ |
| 92 | unsigned long io_hole_start; |
| 93 | unsigned long io_hole_size; |
| 94 | |
| 95 | /* |
| 96 | * Do very early mm setup. |
| 97 | */ |
| 98 | void __init mm_init_ppc64(void) |
| 99 | { |
| 100 | #ifndef CONFIG_PPC_ISERIES |
| 101 | unsigned long i; |
| 102 | #endif |
| 103 | |
| 104 | ppc64_boot_msg(0x100, "MM Init"); |
| 105 | |
| 106 | /* This is the story of the IO hole... please, keep seated, |
| 107 | * unfortunately, we are out of oxygen masks at the moment. |
| 108 | * So we need some rough way to tell where your big IO hole |
| 109 | * is. On pmac, it's between 2G and 4G, on POWER3, it's around |
| 110 | * that area as well, on POWER4 we don't have one, etc... |
| 111 | * We need that as a "hint" when sizing the TCE table on POWER3 |
| 112 | * So far, the simplest way that seem work well enough for us it |
| 113 | * to just assume that the first discontinuity in our physical |
| 114 | * RAM layout is the IO hole. That may not be correct in the future |
| 115 | * (and isn't on iSeries but then we don't care ;) |
| 116 | */ |
| 117 | |
| 118 | #ifndef CONFIG_PPC_ISERIES |
| 119 | for (i = 1; i < lmb.memory.cnt; i++) { |
| 120 | unsigned long base, prevbase, prevsize; |
| 121 | |
| 122 | prevbase = lmb.memory.region[i-1].base; |
| 123 | prevsize = lmb.memory.region[i-1].size; |
| 124 | base = lmb.memory.region[i].base; |
| 125 | if (base > (prevbase + prevsize)) { |
| 126 | io_hole_start = prevbase + prevsize; |
| 127 | io_hole_size = base - (prevbase + prevsize); |
| 128 | break; |
| 129 | } |
| 130 | } |
| 131 | #endif /* CONFIG_PPC_ISERIES */ |
| 132 | if (io_hole_start) |
| 133 | printk("IO Hole assumed to be %lx -> %lx\n", |
| 134 | io_hole_start, io_hole_start + io_hole_size - 1); |
| 135 | |
| 136 | ppc64_boot_msg(0x100, "MM Init Done"); |
| 137 | } |
| 138 | |
| 139 | void free_initmem(void) |
| 140 | { |
| 141 | unsigned long addr; |
| 142 | |
| 143 | addr = (unsigned long)__init_begin; |
| 144 | for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { |
| 145 | memset((void *)addr, 0xcc, PAGE_SIZE); |
| 146 | ClearPageReserved(virt_to_page(addr)); |
| 147 | set_page_count(virt_to_page(addr), 1); |
| 148 | free_page(addr); |
| 149 | totalram_pages++; |
| 150 | } |
| 151 | printk ("Freeing unused kernel memory: %luk freed\n", |
| 152 | ((unsigned long)__init_end - (unsigned long)__init_begin) >> 10); |
| 153 | } |
| 154 | |
| 155 | #ifdef CONFIG_BLK_DEV_INITRD |
| 156 | void free_initrd_mem(unsigned long start, unsigned long end) |
| 157 | { |
| 158 | if (start < end) |
| 159 | printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); |
| 160 | for (; start < end; start += PAGE_SIZE) { |
| 161 | ClearPageReserved(virt_to_page(start)); |
| 162 | set_page_count(virt_to_page(start), 1); |
| 163 | free_page(start); |
| 164 | totalram_pages++; |
| 165 | } |
| 166 | } |
| 167 | #endif |
| 168 | |
| 169 | /* |
| 170 | * Initialize the bootmem system and give it all the memory we |
| 171 | * have available. |
| 172 | */ |
| 173 | #ifndef CONFIG_NEED_MULTIPLE_NODES |
| 174 | void __init do_init_bootmem(void) |
| 175 | { |
| 176 | unsigned long i; |
| 177 | unsigned long start, bootmap_pages; |
| 178 | unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT; |
| 179 | int boot_mapsize; |
| 180 | |
| 181 | /* |
| 182 | * Find an area to use for the bootmem bitmap. Calculate the size of |
| 183 | * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE. |
| 184 | * Add 1 additional page in case the address isn't page-aligned. |
| 185 | */ |
| 186 | bootmap_pages = bootmem_bootmap_pages(total_pages); |
| 187 | |
| 188 | start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE); |
| 189 | BUG_ON(!start); |
| 190 | |
| 191 | boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); |
| 192 | |
| 193 | max_pfn = max_low_pfn; |
| 194 | |
| 195 | /* Add all physical memory to the bootmem map, mark each area |
| 196 | * present. |
| 197 | */ |
| 198 | for (i=0; i < lmb.memory.cnt; i++) |
| 199 | free_bootmem(lmb.memory.region[i].base, |
| 200 | lmb_size_bytes(&lmb.memory, i)); |
| 201 | |
| 202 | /* reserve the sections we're already using */ |
| 203 | for (i=0; i < lmb.reserved.cnt; i++) |
| 204 | reserve_bootmem(lmb.reserved.region[i].base, |
| 205 | lmb_size_bytes(&lmb.reserved, i)); |
| 206 | |
| 207 | for (i=0; i < lmb.memory.cnt; i++) |
| 208 | memory_present(0, lmb_start_pfn(&lmb.memory, i), |
| 209 | lmb_end_pfn(&lmb.memory, i)); |
| 210 | } |
| 211 | |
| 212 | /* |
| 213 | * paging_init() sets up the page tables - in fact we've already done this. |
| 214 | */ |
| 215 | void __init paging_init(void) |
| 216 | { |
| 217 | unsigned long zones_size[MAX_NR_ZONES]; |
| 218 | unsigned long zholes_size[MAX_NR_ZONES]; |
| 219 | unsigned long total_ram = lmb_phys_mem_size(); |
| 220 | unsigned long top_of_ram = lmb_end_of_DRAM(); |
| 221 | |
| 222 | printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", |
| 223 | top_of_ram, total_ram); |
| 224 | printk(KERN_INFO "Memory hole size: %ldMB\n", |
| 225 | (top_of_ram - total_ram) >> 20); |
| 226 | /* |
| 227 | * All pages are DMA-able so we put them all in the DMA zone. |
| 228 | */ |
| 229 | memset(zones_size, 0, sizeof(zones_size)); |
| 230 | memset(zholes_size, 0, sizeof(zholes_size)); |
| 231 | |
| 232 | zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; |
| 233 | zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; |
| 234 | |
| 235 | free_area_init_node(0, NODE_DATA(0), zones_size, |
| 236 | __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); |
| 237 | } |
| 238 | #endif /* ! CONFIG_NEED_MULTIPLE_NODES */ |
| 239 | |
| 240 | static struct kcore_list kcore_vmem; |
| 241 | |
| 242 | static int __init setup_kcore(void) |
| 243 | { |
| 244 | int i; |
| 245 | |
| 246 | for (i=0; i < lmb.memory.cnt; i++) { |
| 247 | unsigned long base, size; |
| 248 | struct kcore_list *kcore_mem; |
| 249 | |
| 250 | base = lmb.memory.region[i].base; |
| 251 | size = lmb.memory.region[i].size; |
| 252 | |
| 253 | /* GFP_ATOMIC to avoid might_sleep warnings during boot */ |
| 254 | kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); |
| 255 | if (!kcore_mem) |
| 256 | panic("mem_init: kmalloc failed\n"); |
| 257 | |
| 258 | kclist_add(kcore_mem, __va(base), size); |
| 259 | } |
| 260 | |
| 261 | kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START); |
| 262 | |
| 263 | return 0; |
| 264 | } |
| 265 | module_init(setup_kcore); |
| 266 | |
| 267 | void __init mem_init(void) |
| 268 | { |
| 269 | #ifdef CONFIG_NEED_MULTIPLE_NODES |
| 270 | int nid; |
| 271 | #endif |
| 272 | pg_data_t *pgdat; |
| 273 | unsigned long i; |
| 274 | struct page *page; |
| 275 | unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; |
| 276 | |
| 277 | num_physpages = max_low_pfn; /* RAM is assumed contiguous */ |
| 278 | high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); |
| 279 | |
| 280 | #ifdef CONFIG_NEED_MULTIPLE_NODES |
| 281 | for_each_online_node(nid) { |
| 282 | if (NODE_DATA(nid)->node_spanned_pages != 0) { |
| 283 | printk("freeing bootmem node %x\n", nid); |
| 284 | totalram_pages += |
| 285 | free_all_bootmem_node(NODE_DATA(nid)); |
| 286 | } |
| 287 | } |
| 288 | #else |
| 289 | max_mapnr = num_physpages; |
| 290 | totalram_pages += free_all_bootmem(); |
| 291 | #endif |
| 292 | |
| 293 | for_each_pgdat(pgdat) { |
| 294 | for (i = 0; i < pgdat->node_spanned_pages; i++) { |
| 295 | page = pgdat_page_nr(pgdat, i); |
| 296 | if (PageReserved(page)) |
| 297 | reservedpages++; |
| 298 | } |
| 299 | } |
| 300 | |
| 301 | codesize = (unsigned long)&_etext - (unsigned long)&_stext; |
| 302 | initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; |
| 303 | datasize = (unsigned long)&_edata - (unsigned long)&__init_end; |
| 304 | bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; |
| 305 | |
| 306 | printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, " |
| 307 | "%luk reserved, %luk data, %luk bss, %luk init)\n", |
| 308 | (unsigned long)nr_free_pages() << (PAGE_SHIFT-10), |
| 309 | num_physpages << (PAGE_SHIFT-10), |
| 310 | codesize >> 10, |
| 311 | reservedpages << (PAGE_SHIFT-10), |
| 312 | datasize >> 10, |
| 313 | bsssize >> 10, |
| 314 | initsize >> 10); |
| 315 | |
| 316 | mem_init_done = 1; |
| 317 | |
| 318 | /* Initialize the vDSO */ |
| 319 | vdso_init(); |
| 320 | } |
| 321 | |
| 322 | void __iomem * reserve_phb_iospace(unsigned long size) |
| 323 | { |
| 324 | void __iomem *virt_addr; |
| 325 | |
| 326 | if (phbs_io_bot >= IMALLOC_BASE) |
| 327 | panic("reserve_phb_iospace(): phb io space overflow\n"); |
| 328 | |
| 329 | virt_addr = (void __iomem *) phbs_io_bot; |
| 330 | phbs_io_bot += size; |
| 331 | |
| 332 | return virt_addr; |
| 333 | } |
| 334 | |
| 335 | static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) |
| 336 | { |
| 337 | memset(addr, 0, kmem_cache_size(cache)); |
| 338 | } |
| 339 | |
| 340 | static const int pgtable_cache_size[2] = { |
| 341 | PTE_TABLE_SIZE, PMD_TABLE_SIZE |
| 342 | }; |
| 343 | static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { |
| 344 | "pgd_pte_cache", "pud_pmd_cache", |
| 345 | }; |
| 346 | |
| 347 | kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; |
| 348 | |
| 349 | void pgtable_cache_init(void) |
| 350 | { |
| 351 | int i; |
| 352 | |
| 353 | BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]); |
| 354 | BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]); |
| 355 | BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]); |
| 356 | BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]); |
| 357 | |
| 358 | for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { |
| 359 | int size = pgtable_cache_size[i]; |
| 360 | const char *name = pgtable_cache_name[i]; |
| 361 | |
| 362 | pgtable_cache[i] = kmem_cache_create(name, |
| 363 | size, size, |
| 364 | SLAB_HWCACHE_ALIGN |
| 365 | | SLAB_MUST_HWCACHE_ALIGN, |
| 366 | zero_ctor, |
| 367 | NULL); |
| 368 | if (! pgtable_cache[i]) |
| 369 | panic("pgtable_cache_init(): could not create %s!\n", |
| 370 | name); |
| 371 | } |
| 372 | } |
| 373 | |
| 374 | pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr, |
| 375 | unsigned long size, pgprot_t vma_prot) |
| 376 | { |
| 377 | if (ppc_md.phys_mem_access_prot) |
| 378 | return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot); |
| 379 | |
| 380 | if (!page_is_ram(addr >> PAGE_SHIFT)) |
| 381 | vma_prot = __pgprot(pgprot_val(vma_prot) |
| 382 | | _PAGE_GUARDED | _PAGE_NO_CACHE); |
| 383 | return vma_prot; |
| 384 | } |
| 385 | EXPORT_SYMBOL(phys_mem_access_prot); |