Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Shawn Guo | 4836193 | 2017-07-27 16:23:37 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2017 Sanechips Technology Co., Ltd. |
| 4 | * Copyright 2017 Linaro Ltd. |
Shawn Guo | 4836193 | 2017-07-27 16:23:37 +0800 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | #include <linux/clk.h> |
| 8 | #include <linux/err.h> |
| 9 | #include <linux/io.h> |
| 10 | #include <linux/kernel.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/pwm.h> |
| 14 | #include <linux/slab.h> |
| 15 | |
| 16 | #define ZX_PWM_MODE 0x0 |
| 17 | #define ZX_PWM_CLKDIV_SHIFT 2 |
| 18 | #define ZX_PWM_CLKDIV_MASK GENMASK(11, 2) |
| 19 | #define ZX_PWM_CLKDIV(x) (((x) << ZX_PWM_CLKDIV_SHIFT) & \ |
| 20 | ZX_PWM_CLKDIV_MASK) |
| 21 | #define ZX_PWM_POLAR BIT(1) |
| 22 | #define ZX_PWM_EN BIT(0) |
| 23 | #define ZX_PWM_PERIOD 0x4 |
| 24 | #define ZX_PWM_DUTY 0x8 |
| 25 | |
| 26 | #define ZX_PWM_CLKDIV_MAX 1023 |
| 27 | #define ZX_PWM_PERIOD_MAX 65535 |
| 28 | |
| 29 | struct zx_pwm_chip { |
| 30 | struct pwm_chip chip; |
| 31 | struct clk *pclk; |
| 32 | struct clk *wclk; |
| 33 | void __iomem *base; |
| 34 | }; |
| 35 | |
| 36 | static inline struct zx_pwm_chip *to_zx_pwm_chip(struct pwm_chip *chip) |
| 37 | { |
| 38 | return container_of(chip, struct zx_pwm_chip, chip); |
| 39 | } |
| 40 | |
| 41 | static inline u32 zx_pwm_readl(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| 42 | unsigned int offset) |
| 43 | { |
| 44 | return readl(zpc->base + (hwpwm + 1) * 0x10 + offset); |
| 45 | } |
| 46 | |
| 47 | static inline void zx_pwm_writel(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| 48 | unsigned int offset, u32 value) |
| 49 | { |
| 50 | writel(value, zpc->base + (hwpwm + 1) * 0x10 + offset); |
| 51 | } |
| 52 | |
| 53 | static void zx_pwm_set_mask(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| 54 | unsigned int offset, u32 mask, u32 value) |
| 55 | { |
| 56 | u32 data; |
| 57 | |
| 58 | data = zx_pwm_readl(zpc, hwpwm, offset); |
| 59 | data &= ~mask; |
| 60 | data |= value & mask; |
| 61 | zx_pwm_writel(zpc, hwpwm, offset, data); |
| 62 | } |
| 63 | |
| 64 | static void zx_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, |
| 65 | struct pwm_state *state) |
| 66 | { |
| 67 | struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| 68 | unsigned long rate; |
| 69 | unsigned int div; |
| 70 | u32 value; |
| 71 | u64 tmp; |
| 72 | |
| 73 | value = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_MODE); |
| 74 | |
| 75 | if (value & ZX_PWM_POLAR) |
| 76 | state->polarity = PWM_POLARITY_NORMAL; |
| 77 | else |
| 78 | state->polarity = PWM_POLARITY_INVERSED; |
| 79 | |
| 80 | if (value & ZX_PWM_EN) |
| 81 | state->enabled = true; |
| 82 | else |
| 83 | state->enabled = false; |
| 84 | |
| 85 | div = (value & ZX_PWM_CLKDIV_MASK) >> ZX_PWM_CLKDIV_SHIFT; |
| 86 | rate = clk_get_rate(zpc->wclk); |
| 87 | |
| 88 | tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_PERIOD); |
| 89 | tmp *= div * NSEC_PER_SEC; |
| 90 | state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| 91 | |
| 92 | tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_DUTY); |
| 93 | tmp *= div * NSEC_PER_SEC; |
| 94 | state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| 95 | } |
| 96 | |
| 97 | static int zx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 98 | unsigned int duty_ns, unsigned int period_ns) |
| 99 | { |
| 100 | struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| 101 | unsigned int period_cycles, duty_cycles; |
| 102 | unsigned long long c; |
| 103 | unsigned int div = 1; |
| 104 | unsigned long rate; |
| 105 | |
| 106 | /* Find out the best divider */ |
| 107 | rate = clk_get_rate(zpc->wclk); |
| 108 | |
| 109 | while (1) { |
| 110 | c = rate / div; |
| 111 | c = c * period_ns; |
| 112 | do_div(c, NSEC_PER_SEC); |
| 113 | |
| 114 | if (c < ZX_PWM_PERIOD_MAX) |
| 115 | break; |
| 116 | |
| 117 | div++; |
| 118 | |
| 119 | if (div > ZX_PWM_CLKDIV_MAX) |
| 120 | return -ERANGE; |
| 121 | } |
| 122 | |
| 123 | /* Calculate duty cycles */ |
| 124 | period_cycles = c; |
| 125 | c *= duty_ns; |
| 126 | do_div(c, period_ns); |
| 127 | duty_cycles = c; |
| 128 | |
| 129 | /* |
| 130 | * If the PWM is being enabled, we have to temporarily disable it |
| 131 | * before configuring the registers. |
| 132 | */ |
| 133 | if (pwm_is_enabled(pwm)) |
| 134 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_EN, 0); |
| 135 | |
| 136 | /* Set up registers */ |
| 137 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_CLKDIV_MASK, |
| 138 | ZX_PWM_CLKDIV(div)); |
| 139 | zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_PERIOD, period_cycles); |
| 140 | zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_DUTY, duty_cycles); |
| 141 | |
| 142 | /* Re-enable the PWM if needed */ |
| 143 | if (pwm_is_enabled(pwm)) |
| 144 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| 145 | ZX_PWM_EN, ZX_PWM_EN); |
| 146 | |
| 147 | return 0; |
| 148 | } |
| 149 | |
| 150 | static int zx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
Uwe Kleine-König | 71523d1 | 2019-08-24 17:37:07 +0200 | [diff] [blame] | 151 | const struct pwm_state *state) |
Shawn Guo | 4836193 | 2017-07-27 16:23:37 +0800 | [diff] [blame] | 152 | { |
| 153 | struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| 154 | struct pwm_state cstate; |
| 155 | int ret; |
| 156 | |
| 157 | pwm_get_state(pwm, &cstate); |
| 158 | |
| 159 | if (state->polarity != cstate.polarity) |
| 160 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_POLAR, |
| 161 | (state->polarity == PWM_POLARITY_INVERSED) ? |
| 162 | 0 : ZX_PWM_POLAR); |
| 163 | |
| 164 | if (state->period != cstate.period || |
| 165 | state->duty_cycle != cstate.duty_cycle) { |
| 166 | ret = zx_pwm_config(chip, pwm, state->duty_cycle, |
| 167 | state->period); |
| 168 | if (ret) |
| 169 | return ret; |
| 170 | } |
| 171 | |
| 172 | if (state->enabled != cstate.enabled) { |
| 173 | if (state->enabled) { |
| 174 | ret = clk_prepare_enable(zpc->wclk); |
| 175 | if (ret) |
| 176 | return ret; |
| 177 | |
| 178 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| 179 | ZX_PWM_EN, ZX_PWM_EN); |
| 180 | } else { |
| 181 | zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| 182 | ZX_PWM_EN, 0); |
| 183 | clk_disable_unprepare(zpc->wclk); |
| 184 | } |
| 185 | } |
| 186 | |
| 187 | return 0; |
| 188 | } |
| 189 | |
| 190 | static const struct pwm_ops zx_pwm_ops = { |
| 191 | .apply = zx_pwm_apply, |
| 192 | .get_state = zx_pwm_get_state, |
| 193 | .owner = THIS_MODULE, |
| 194 | }; |
| 195 | |
| 196 | static int zx_pwm_probe(struct platform_device *pdev) |
| 197 | { |
| 198 | struct zx_pwm_chip *zpc; |
| 199 | struct resource *res; |
| 200 | unsigned int i; |
| 201 | int ret; |
| 202 | |
| 203 | zpc = devm_kzalloc(&pdev->dev, sizeof(*zpc), GFP_KERNEL); |
| 204 | if (!zpc) |
| 205 | return -ENOMEM; |
| 206 | |
| 207 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 208 | zpc->base = devm_ioremap_resource(&pdev->dev, res); |
| 209 | if (IS_ERR(zpc->base)) |
| 210 | return PTR_ERR(zpc->base); |
| 211 | |
| 212 | zpc->pclk = devm_clk_get(&pdev->dev, "pclk"); |
| 213 | if (IS_ERR(zpc->pclk)) |
| 214 | return PTR_ERR(zpc->pclk); |
| 215 | |
| 216 | zpc->wclk = devm_clk_get(&pdev->dev, "wclk"); |
| 217 | if (IS_ERR(zpc->wclk)) |
| 218 | return PTR_ERR(zpc->wclk); |
| 219 | |
| 220 | ret = clk_prepare_enable(zpc->pclk); |
| 221 | if (ret) |
| 222 | return ret; |
| 223 | |
| 224 | zpc->chip.dev = &pdev->dev; |
| 225 | zpc->chip.ops = &zx_pwm_ops; |
| 226 | zpc->chip.base = -1; |
| 227 | zpc->chip.npwm = 4; |
| 228 | zpc->chip.of_xlate = of_pwm_xlate_with_flags; |
| 229 | zpc->chip.of_pwm_n_cells = 3; |
| 230 | |
| 231 | /* |
| 232 | * PWM devices may be enabled by firmware, and let's disable all of |
| 233 | * them initially to save power. |
| 234 | */ |
| 235 | for (i = 0; i < zpc->chip.npwm; i++) |
| 236 | zx_pwm_set_mask(zpc, i, ZX_PWM_MODE, ZX_PWM_EN, 0); |
| 237 | |
| 238 | ret = pwmchip_add(&zpc->chip); |
| 239 | if (ret < 0) { |
| 240 | dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); |
| 241 | return ret; |
| 242 | } |
| 243 | |
| 244 | platform_set_drvdata(pdev, zpc); |
| 245 | |
| 246 | return 0; |
| 247 | } |
| 248 | |
| 249 | static int zx_pwm_remove(struct platform_device *pdev) |
| 250 | { |
| 251 | struct zx_pwm_chip *zpc = platform_get_drvdata(pdev); |
| 252 | int ret; |
| 253 | |
| 254 | ret = pwmchip_remove(&zpc->chip); |
| 255 | clk_disable_unprepare(zpc->pclk); |
| 256 | |
| 257 | return ret; |
| 258 | } |
| 259 | |
| 260 | static const struct of_device_id zx_pwm_dt_ids[] = { |
| 261 | { .compatible = "zte,zx296718-pwm", }, |
| 262 | { /* sentinel */ } |
| 263 | }; |
| 264 | MODULE_DEVICE_TABLE(of, zx_pwm_dt_ids); |
| 265 | |
| 266 | static struct platform_driver zx_pwm_driver = { |
| 267 | .driver = { |
| 268 | .name = "zx-pwm", |
| 269 | .of_match_table = zx_pwm_dt_ids, |
| 270 | }, |
| 271 | .probe = zx_pwm_probe, |
| 272 | .remove = zx_pwm_remove, |
| 273 | }; |
| 274 | module_platform_driver(zx_pwm_driver); |
| 275 | |
| 276 | MODULE_ALIAS("platform:zx-pwm"); |
| 277 | MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); |
| 278 | MODULE_DESCRIPTION("ZTE ZX PWM Driver"); |
| 279 | MODULE_LICENSE("GPL v2"); |