| Guenter Roeck | cce2095 | 2019-12-05 20:26:24 -0800 | [diff] [blame] | 1 | .. SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | |
| 3 | Kernel driver max20730 |
| 4 | ====================== |
| 5 | |
| 6 | Supported chips: |
| 7 | |
| Ugur Usug | 5c9353f | 2020-06-15 23:49:14 +0000 | [diff] [blame] | 8 | * Maxim MAX20710 |
| 9 | |
| 10 | Prefix: 'max20710' |
| 11 | |
| 12 | Addresses scanned: - |
| 13 | |
| 14 | Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf |
| 15 | |
| Guenter Roeck | cce2095 | 2019-12-05 20:26:24 -0800 | [diff] [blame] | 16 | * Maxim MAX20730 |
| 17 | |
| 18 | Prefix: 'max20730' |
| 19 | |
| 20 | Addresses scanned: - |
| 21 | |
| 22 | Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf |
| 23 | |
| 24 | * Maxim MAX20734 |
| 25 | |
| 26 | Prefix: 'max20734' |
| 27 | |
| 28 | Addresses scanned: - |
| 29 | |
| 30 | Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf |
| 31 | |
| 32 | * Maxim MAX20743 |
| 33 | |
| 34 | Prefix: 'max20743' |
| 35 | |
| 36 | Addresses scanned: - |
| 37 | |
| 38 | Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf |
| 39 | |
| 40 | Author: Guenter Roeck <linux@roeck-us.net> |
| 41 | |
| 42 | |
| 43 | Description |
| 44 | ----------- |
| 45 | |
| Ugur Usug | 5c9353f | 2020-06-15 23:49:14 +0000 | [diff] [blame] | 46 | This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743 |
| Guenter Roeck | cce2095 | 2019-12-05 20:26:24 -0800 | [diff] [blame] | 47 | Integrated, Step-Down Switching Regulators with PMBus support. |
| 48 | |
| 49 | The driver is a client driver to the core PMBus driver. |
| 50 | Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. |
| 51 | |
| 52 | |
| 53 | Usage Notes |
| 54 | ----------- |
| 55 | |
| 56 | This driver does not auto-detect devices. You will have to instantiate the |
| 57 | devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for |
| 58 | details. |
| 59 | |
| 60 | |
| 61 | Sysfs entries |
| 62 | ------------- |
| 63 | |
| 64 | =================== ===== ======================================================= |
| 65 | curr1_crit RW/RO Critical output current. Please see datasheet for |
| 66 | supported limits. Read-only if the chip is |
| 67 | write protected; read-write otherwise. |
| 68 | curr1_crit_alarm RO Output current critical alarm |
| 69 | curr1_input RO Output current |
| 70 | curr1_label RO 'iout1' |
| 71 | in1_alarm RO Input voltage alarm |
| 72 | in1_input RO Input voltage |
| 73 | in1_label RO 'vin' |
| 74 | in2_alarm RO Output voltage alarm |
| 75 | in2_input RO Output voltage |
| 76 | in2_label RO 'vout1' |
| 77 | temp1_crit RW/RO Critical temeperature. Supported values are 130 or 150 |
| 78 | degrees C. Read-only if the chip is write protected; |
| 79 | read-write otherwise. |
| 80 | temp1_crit_alarm RO Temperature critical alarm |
| 81 | temp1_input RO Chip temperature |
| 82 | =================== ===== ======================================================= |