Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * USB PhidgetInterfaceKit driver 1.0 |
| 3 | * |
| 4 | * Copyright (C) 2004 Sean Young <sean@mess.org> |
| 5 | * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | * |
| 12 | * This is a driver for the USB PhidgetInterfaceKit. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/config.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/errno.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/usb.h> |
| 22 | |
| 23 | #define DRIVER_AUTHOR "Sean Young <sean@mess.org>" |
| 24 | #define DRIVER_DESC "USB PhidgetInterfaceKit Driver" |
| 25 | |
| 26 | #define USB_VENDOR_ID_GLAB 0x06c2 |
| 27 | #define USB_DEVICE_ID_INTERFACEKIT004 0x0040 |
| 28 | #define USB_DEVICE_ID_INTERFACEKIT888 0x0045 |
| 29 | #define USB_DEVICE_ID_INTERFACEKIT047 0x0051 |
| 30 | #define USB_DEVICE_ID_INTERFACEKIT088 0x0053 |
| 31 | |
| 32 | #define USB_VENDOR_ID_WISEGROUP 0x0925 |
| 33 | #define USB_DEVICE_ID_INTERFACEKIT884 0x8201 |
| 34 | |
| 35 | #define MAX_INTERFACES 8 |
| 36 | |
| 37 | struct driver_interfacekit { |
| 38 | int sensors; |
| 39 | int inputs; |
| 40 | int outputs; |
| 41 | int has_lcd; |
| 42 | }; |
| 43 | #define ifkit(_sensors, _inputs, _outputs, _lcd) \ |
| 44 | static struct driver_interfacekit ph_##_sensors##_inputs##_outputs = { \ |
| 45 | .sensors = _sensors, \ |
| 46 | .inputs = _inputs, \ |
| 47 | .outputs = _outputs, \ |
| 48 | .has_lcd = _lcd, \ |
| 49 | }; |
| 50 | ifkit(0, 0, 4, 0); |
| 51 | ifkit(8, 8, 8, 0); |
| 52 | ifkit(0, 4, 7, 1); |
| 53 | ifkit(8, 8, 4, 0); |
| 54 | ifkit(0, 8, 8, 1); |
| 55 | |
| 56 | struct phidget_interfacekit { |
| 57 | struct usb_device *udev; |
| 58 | struct usb_interface *intf; |
| 59 | struct driver_interfacekit *ifkit; |
| 60 | int outputs[MAX_INTERFACES]; |
| 61 | int inputs[MAX_INTERFACES]; |
| 62 | int sensors[MAX_INTERFACES]; |
| 63 | u8 lcd_files_on; |
| 64 | |
| 65 | struct urb *irq; |
| 66 | unsigned char *data; |
| 67 | dma_addr_t data_dma; |
| 68 | }; |
| 69 | |
| 70 | static struct usb_device_id id_table[] = { |
| 71 | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004), |
| 72 | .driver_info = (kernel_ulong_t)&ph_004}, |
| 73 | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888), |
| 74 | .driver_info = (kernel_ulong_t)&ph_888}, |
| 75 | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047), |
| 76 | .driver_info = (kernel_ulong_t)&ph_047}, |
| 77 | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088), |
| 78 | .driver_info = (kernel_ulong_t)&ph_088}, |
| 79 | {USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884), |
| 80 | .driver_info = (kernel_ulong_t)&ph_884}, |
| 81 | {} |
| 82 | }; |
| 83 | MODULE_DEVICE_TABLE(usb, id_table); |
| 84 | |
| 85 | static int change_outputs(struct phidget_interfacekit *kit, int output_num, int enable) |
| 86 | { |
| 87 | unsigned char *buffer; |
| 88 | int retval; |
| 89 | int n; |
| 90 | |
| 91 | buffer = kmalloc(4, GFP_KERNEL); |
| 92 | if (!buffer) { |
| 93 | dev_err(&kit->udev->dev, "%s - out of memory\n", |
| 94 | __FUNCTION__); |
| 95 | return -ENOMEM; |
| 96 | } |
| 97 | |
| 98 | kit->outputs[output_num] = enable; |
| 99 | memset(buffer, 0, 4); |
| 100 | for (n=0; n<8; n++) { |
| 101 | if (kit->outputs[n]) { |
| 102 | buffer[0] |= 1 << n; |
| 103 | } |
| 104 | } |
| 105 | |
| 106 | dev_dbg(&kit->udev->dev, "sending data: %02x\n", buffer[0]); |
| 107 | |
| 108 | retval = usb_control_msg(kit->udev, |
| 109 | usb_sndctrlpipe(kit->udev, 0), |
| 110 | 0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000); |
| 111 | |
| 112 | if (retval != 4) |
| 113 | dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", |
| 114 | retval); |
| 115 | kfree(buffer); |
| 116 | |
| 117 | return retval < 0 ? retval : 0; |
| 118 | } |
| 119 | |
| 120 | static int change_string(struct phidget_interfacekit *kit, const char *display, unsigned char row) |
| 121 | { |
| 122 | unsigned char *buffer; |
| 123 | unsigned char *form_buffer; |
| 124 | int retval = -ENOMEM; |
| 125 | int i,j, len, buf_ptr; |
| 126 | |
| 127 | buffer = kmalloc(8, GFP_KERNEL); |
| 128 | form_buffer = kmalloc(30, GFP_KERNEL); |
| 129 | if ((!buffer) || (!form_buffer)) { |
| 130 | dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); |
| 131 | goto exit; |
| 132 | } |
| 133 | |
| 134 | len = strlen(display); |
| 135 | if (len > 20) |
| 136 | len = 20; |
| 137 | |
| 138 | dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display); |
| 139 | |
| 140 | form_buffer[0] = row * 0x40 + 0x80; |
| 141 | form_buffer[1] = 0x02; |
| 142 | buf_ptr = 2; |
| 143 | for (i = 0; i<len; i++) |
| 144 | form_buffer[buf_ptr++] = display[i]; |
| 145 | |
| 146 | for (i = 0; i < (20 - len); i++) |
| 147 | form_buffer[buf_ptr++] = 0x20; |
| 148 | form_buffer[buf_ptr++] = 0x01; |
| 149 | form_buffer[buf_ptr++] = row * 0x40 + 0x80 + strlen(display); |
| 150 | |
| 151 | for (i = 0; i < buf_ptr; i += 7) { |
| 152 | if ((buf_ptr - i) > 7) |
| 153 | len = 7; |
| 154 | else |
| 155 | len = (buf_ptr - i); |
| 156 | for (j = 0; j < len; j++) |
| 157 | buffer[j] = form_buffer[i + j]; |
| 158 | buffer[7] = len; |
| 159 | |
| 160 | retval = usb_control_msg(kit->udev, |
| 161 | usb_sndctrlpipe(kit->udev, 0), |
| 162 | 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); |
| 163 | if (retval < 0) |
| 164 | goto exit; |
| 165 | } |
| 166 | |
| 167 | retval = 0; |
| 168 | exit: |
| 169 | kfree(buffer); |
| 170 | kfree(form_buffer); |
| 171 | |
| 172 | return retval; |
| 173 | } |
| 174 | |
| 175 | #define set_lcd_line(number) \ |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 176 | static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 177 | { \ |
| 178 | struct usb_interface *intf = to_usb_interface(dev); \ |
| 179 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| 180 | change_string(kit, buf, number - 1); \ |
| 181 | return count; \ |
| 182 | } \ |
| 183 | static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number); |
| 184 | set_lcd_line(1); |
| 185 | set_lcd_line(2); |
| 186 | |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 187 | static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 188 | { |
| 189 | struct usb_interface *intf = to_usb_interface(dev); |
| 190 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); |
| 191 | int enabled; |
| 192 | unsigned char *buffer; |
| 193 | int retval = -ENOMEM; |
| 194 | |
| 195 | buffer = kmalloc(8, GFP_KERNEL); |
| 196 | if (!buffer) { |
| 197 | dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); |
| 198 | goto exit; |
| 199 | } |
| 200 | |
| 201 | if (sscanf(buf, "%d", &enabled) < 1) { |
| 202 | retval = -EINVAL; |
| 203 | goto exit; |
| 204 | } |
| 205 | memset(buffer, 0x00, 8); |
| 206 | if (enabled) |
| 207 | buffer[0] = 0x01; |
| 208 | buffer[7] = 0x11; |
| 209 | |
| 210 | dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off"); |
| 211 | |
| 212 | retval = usb_control_msg(kit->udev, |
| 213 | usb_sndctrlpipe(kit->udev, 0), |
| 214 | 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); |
| 215 | if (retval < 0) |
| 216 | goto exit; |
| 217 | |
| 218 | retval = count; |
| 219 | exit: |
| 220 | kfree(buffer); |
| 221 | return retval; |
| 222 | } |
| 223 | static DEVICE_ATTR(backlight, S_IWUGO, NULL, set_backlight); |
| 224 | |
| 225 | static void remove_lcd_files(struct phidget_interfacekit *kit) |
| 226 | { |
| 227 | if (kit->lcd_files_on) { |
| 228 | dev_dbg(&kit->udev->dev, "Removing lcd files\n"); |
| 229 | device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1); |
| 230 | device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2); |
| 231 | device_remove_file(&kit->intf->dev, &dev_attr_backlight); |
| 232 | } |
| 233 | } |
| 234 | |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 235 | static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 236 | { |
| 237 | struct usb_interface *intf = to_usb_interface(dev); |
| 238 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); |
| 239 | int enable; |
| 240 | |
| 241 | if (kit->ifkit->has_lcd == 0) |
| 242 | return -ENODEV; |
| 243 | |
| 244 | if (sscanf(buf, "%d", &enable) < 1) |
| 245 | return -EINVAL; |
| 246 | |
| 247 | if (enable) { |
| 248 | if (!kit->lcd_files_on) { |
| 249 | dev_dbg(&kit->udev->dev, "Adding lcd files\n"); |
| 250 | device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1); |
| 251 | device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2); |
| 252 | device_create_file(&kit->intf->dev, &dev_attr_backlight); |
| 253 | kit->lcd_files_on = 1; |
| 254 | } |
| 255 | } else { |
| 256 | if (kit->lcd_files_on) { |
| 257 | remove_lcd_files(kit); |
| 258 | kit->lcd_files_on = 0; |
| 259 | } |
| 260 | } |
| 261 | |
| 262 | return count; |
| 263 | } |
| 264 | static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files); |
| 265 | |
| 266 | static void interfacekit_irq(struct urb *urb, struct pt_regs *regs) |
| 267 | { |
| 268 | struct phidget_interfacekit *kit = urb->context; |
| 269 | unsigned char *buffer = kit->data; |
| 270 | int status; |
| 271 | int n; |
| 272 | |
| 273 | switch (urb->status) { |
| 274 | case 0: /* success */ |
| 275 | break; |
| 276 | case -ECONNRESET: /* unlink */ |
| 277 | case -ENOENT: |
| 278 | case -ESHUTDOWN: |
| 279 | return; |
| 280 | /* -EPIPE: should clear the halt */ |
| 281 | default: /* error */ |
| 282 | goto resubmit; |
| 283 | } |
| 284 | |
| 285 | for (n=0; n<8; n++) { |
| 286 | kit->inputs[n] = buffer[1] & (1 << n) ? 1 : 0; |
| 287 | } |
| 288 | |
| 289 | if (buffer[0] & 1) { |
| 290 | kit->sensors[4] = buffer[2] + (buffer[3] & 0x0f) * 256; |
| 291 | kit->sensors[5] = buffer[4] + (buffer[3] & 0xf0) * 16; |
| 292 | kit->sensors[6] = buffer[5] + (buffer[6] & 0x0f) * 256; |
| 293 | kit->sensors[7] = buffer[7] + (buffer[6] & 0xf0) * 16; |
| 294 | } else { |
| 295 | kit->sensors[0] = buffer[2] + (buffer[3] & 0x0f) * 256; |
| 296 | kit->sensors[1] = buffer[4] + (buffer[3] & 0xf0) * 16; |
| 297 | kit->sensors[2] = buffer[5] + (buffer[6] & 0x0f) * 256; |
| 298 | kit->sensors[3] = buffer[7] + (buffer[6] & 0xf0) * 16; |
| 299 | } |
| 300 | |
| 301 | resubmit: |
| 302 | status = usb_submit_urb(urb, SLAB_ATOMIC); |
| 303 | if (status) |
| 304 | err("can't resubmit intr, %s-%s/interfacekit0, status %d", |
| 305 | kit->udev->bus->bus_name, |
| 306 | kit->udev->devpath, status); |
| 307 | } |
| 308 | |
| 309 | #define show_set_output(value) \ |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 310 | static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf, \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 311 | size_t count) \ |
| 312 | { \ |
| 313 | struct usb_interface *intf = to_usb_interface(dev); \ |
| 314 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| 315 | int enabled; \ |
| 316 | int retval; \ |
| 317 | \ |
| 318 | if (sscanf(buf, "%d", &enabled) < 1) { \ |
| 319 | return -EINVAL; \ |
| 320 | } \ |
| 321 | \ |
| 322 | retval = change_outputs(kit, value - 1, enabled ? 1 : 0); \ |
| 323 | \ |
| 324 | return retval ? retval : count; \ |
| 325 | } \ |
| 326 | \ |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 327 | static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 328 | { \ |
| 329 | struct usb_interface *intf = to_usb_interface(dev); \ |
| 330 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| 331 | \ |
| 332 | return sprintf(buf, "%d\n", kit->outputs[value - 1]); \ |
| 333 | } \ |
| 334 | static DEVICE_ATTR(output##value, S_IWUGO | S_IRUGO, \ |
| 335 | show_output##value, set_output##value); |
| 336 | show_set_output(1); |
| 337 | show_set_output(2); |
| 338 | show_set_output(3); |
| 339 | show_set_output(4); |
| 340 | show_set_output(5); |
| 341 | show_set_output(6); |
| 342 | show_set_output(7); |
| 343 | show_set_output(8); /* should be MAX_INTERFACES - 1 */ |
| 344 | |
| 345 | #define show_input(value) \ |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 346 | static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 347 | { \ |
| 348 | struct usb_interface *intf = to_usb_interface(dev); \ |
| 349 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| 350 | \ |
| 351 | return sprintf(buf, "%d\n", kit->inputs[value - 1]); \ |
| 352 | } \ |
| 353 | static DEVICE_ATTR(input##value, S_IRUGO, show_input##value, NULL); |
| 354 | |
| 355 | show_input(1); |
| 356 | show_input(2); |
| 357 | show_input(3); |
| 358 | show_input(4); |
| 359 | show_input(5); |
| 360 | show_input(6); |
| 361 | show_input(7); |
| 362 | show_input(8); /* should be MAX_INTERFACES - 1 */ |
| 363 | |
| 364 | #define show_sensor(value) \ |
Yani Ioannou | 060b884 | 2005-05-17 06:44:04 -0400 | [diff] [blame^] | 365 | static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 366 | { \ |
| 367 | struct usb_interface *intf = to_usb_interface(dev); \ |
| 368 | struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| 369 | \ |
| 370 | return sprintf(buf, "%d\n", kit->sensors[value - 1]); \ |
| 371 | } \ |
| 372 | static DEVICE_ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL); |
| 373 | |
| 374 | show_sensor(1); |
| 375 | show_sensor(2); |
| 376 | show_sensor(3); |
| 377 | show_sensor(4); |
| 378 | show_sensor(5); |
| 379 | show_sensor(6); |
| 380 | show_sensor(7); |
| 381 | show_sensor(8); /* should be MAX_INTERFACES - 1 */ |
| 382 | |
| 383 | static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| 384 | { |
| 385 | struct usb_device *dev = interface_to_usbdev(intf); |
| 386 | struct usb_host_interface *interface; |
| 387 | struct usb_endpoint_descriptor *endpoint; |
| 388 | struct phidget_interfacekit *kit; |
| 389 | struct driver_interfacekit *ifkit; |
| 390 | int pipe, maxp; |
| 391 | |
| 392 | ifkit = (struct driver_interfacekit *)id->driver_info; |
| 393 | if (!ifkit) |
| 394 | return -ENODEV; |
| 395 | |
| 396 | interface = intf->cur_altsetting; |
| 397 | if (interface->desc.bNumEndpoints != 1) |
| 398 | return -ENODEV; |
| 399 | |
| 400 | endpoint = &interface->endpoint[0].desc; |
| 401 | if (!(endpoint->bEndpointAddress & 0x80)) |
| 402 | return -ENODEV; |
| 403 | /* |
| 404 | * bmAttributes |
| 405 | */ |
| 406 | pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); |
| 407 | maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); |
| 408 | |
| 409 | kit = kmalloc(sizeof(*kit), GFP_KERNEL); |
| 410 | if (kit == NULL) { |
| 411 | dev_err(&intf->dev, "%s - out of memory\n", __FUNCTION__); |
| 412 | return -ENOMEM; |
| 413 | } |
| 414 | memset(kit, 0, sizeof(*kit)); |
| 415 | kit->ifkit = ifkit; |
| 416 | |
| 417 | kit->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &kit->data_dma); |
| 418 | if (!kit->data) { |
| 419 | kfree(kit); |
| 420 | return -ENOMEM; |
| 421 | } |
| 422 | |
| 423 | kit->irq = usb_alloc_urb(0, GFP_KERNEL); |
| 424 | if (!kit->irq) { |
| 425 | usb_buffer_free(dev, 8, kit->data, kit->data_dma); |
| 426 | kfree(kit); |
| 427 | return -ENOMEM; |
| 428 | } |
| 429 | |
| 430 | kit->udev = usb_get_dev(dev); |
| 431 | kit->intf = intf; |
| 432 | usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data, |
| 433 | (maxp > 8 ? 8 : maxp), |
| 434 | interfacekit_irq, kit, endpoint->bInterval); |
| 435 | kit->irq->transfer_dma = kit->data_dma; |
| 436 | kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 437 | |
| 438 | usb_set_intfdata(intf, kit); |
| 439 | |
| 440 | if (usb_submit_urb(kit->irq, GFP_KERNEL)) { |
| 441 | return -EIO; |
| 442 | } |
| 443 | |
| 444 | if (ifkit->outputs >= 4) { |
| 445 | device_create_file(&intf->dev, &dev_attr_output1); |
| 446 | device_create_file(&intf->dev, &dev_attr_output2); |
| 447 | device_create_file(&intf->dev, &dev_attr_output3); |
| 448 | device_create_file(&intf->dev, &dev_attr_output4); |
| 449 | } |
| 450 | if (ifkit->outputs == 8) { |
| 451 | device_create_file(&intf->dev, &dev_attr_output5); |
| 452 | device_create_file(&intf->dev, &dev_attr_output6); |
| 453 | device_create_file(&intf->dev, &dev_attr_output7); |
| 454 | device_create_file(&intf->dev, &dev_attr_output8); |
| 455 | } |
| 456 | |
| 457 | if (ifkit->inputs >= 4) { |
| 458 | device_create_file(&intf->dev, &dev_attr_input1); |
| 459 | device_create_file(&intf->dev, &dev_attr_input2); |
| 460 | device_create_file(&intf->dev, &dev_attr_input3); |
| 461 | device_create_file(&intf->dev, &dev_attr_input4); |
| 462 | } |
| 463 | if (ifkit->inputs == 8) { |
| 464 | device_create_file(&intf->dev, &dev_attr_input5); |
| 465 | device_create_file(&intf->dev, &dev_attr_input6); |
| 466 | device_create_file(&intf->dev, &dev_attr_input7); |
| 467 | device_create_file(&intf->dev, &dev_attr_input8); |
| 468 | } |
| 469 | |
| 470 | if (ifkit->sensors >= 4) { |
| 471 | device_create_file(&intf->dev, &dev_attr_sensor1); |
| 472 | device_create_file(&intf->dev, &dev_attr_sensor2); |
| 473 | device_create_file(&intf->dev, &dev_attr_sensor3); |
| 474 | device_create_file(&intf->dev, &dev_attr_sensor4); |
| 475 | } |
| 476 | if (ifkit->sensors >= 7) { |
| 477 | device_create_file(&intf->dev, &dev_attr_sensor5); |
| 478 | device_create_file(&intf->dev, &dev_attr_sensor6); |
| 479 | device_create_file(&intf->dev, &dev_attr_sensor7); |
| 480 | } |
| 481 | if (ifkit->sensors == 8) { |
| 482 | device_create_file(&intf->dev, &dev_attr_sensor8); |
| 483 | } |
| 484 | |
| 485 | if (ifkit->has_lcd) |
| 486 | device_create_file(&intf->dev, &dev_attr_lcd); |
| 487 | |
| 488 | dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n", |
| 489 | ifkit->sensors, ifkit->inputs, ifkit->outputs); |
| 490 | |
| 491 | return 0; |
| 492 | } |
| 493 | |
| 494 | static void interfacekit_disconnect(struct usb_interface *interface) |
| 495 | { |
| 496 | struct phidget_interfacekit *kit; |
| 497 | |
| 498 | kit = usb_get_intfdata(interface); |
| 499 | usb_set_intfdata(interface, NULL); |
| 500 | if (!kit) |
| 501 | return; |
| 502 | |
| 503 | if (kit->ifkit->outputs >= 4) { |
| 504 | device_remove_file(&interface->dev, &dev_attr_output1); |
| 505 | device_remove_file(&interface->dev, &dev_attr_output2); |
| 506 | device_remove_file(&interface->dev, &dev_attr_output3); |
| 507 | device_remove_file(&interface->dev, &dev_attr_output4); |
| 508 | } |
| 509 | if (kit->ifkit->outputs == 8) { |
| 510 | device_remove_file(&interface->dev, &dev_attr_output5); |
| 511 | device_remove_file(&interface->dev, &dev_attr_output6); |
| 512 | device_remove_file(&interface->dev, &dev_attr_output7); |
| 513 | device_remove_file(&interface->dev, &dev_attr_output8); |
| 514 | } |
| 515 | |
| 516 | if (kit->ifkit->inputs >= 4) { |
| 517 | device_remove_file(&interface->dev, &dev_attr_input1); |
| 518 | device_remove_file(&interface->dev, &dev_attr_input2); |
| 519 | device_remove_file(&interface->dev, &dev_attr_input3); |
| 520 | device_remove_file(&interface->dev, &dev_attr_input4); |
| 521 | } |
| 522 | if (kit->ifkit->inputs == 8) { |
| 523 | device_remove_file(&interface->dev, &dev_attr_input5); |
| 524 | device_remove_file(&interface->dev, &dev_attr_input6); |
| 525 | device_remove_file(&interface->dev, &dev_attr_input7); |
| 526 | device_remove_file(&interface->dev, &dev_attr_input8); |
| 527 | } |
| 528 | |
| 529 | if (kit->ifkit->sensors >= 4) { |
| 530 | device_remove_file(&interface->dev, &dev_attr_sensor1); |
| 531 | device_remove_file(&interface->dev, &dev_attr_sensor2); |
| 532 | device_remove_file(&interface->dev, &dev_attr_sensor3); |
| 533 | device_remove_file(&interface->dev, &dev_attr_sensor4); |
| 534 | } |
| 535 | if (kit->ifkit->sensors >= 7) { |
| 536 | device_remove_file(&interface->dev, &dev_attr_sensor5); |
| 537 | device_remove_file(&interface->dev, &dev_attr_sensor6); |
| 538 | device_remove_file(&interface->dev, &dev_attr_sensor7); |
| 539 | } |
| 540 | if (kit->ifkit->sensors == 8) { |
| 541 | device_remove_file(&interface->dev, &dev_attr_sensor8); |
| 542 | } |
| 543 | if (kit->ifkit->has_lcd) |
| 544 | device_remove_file(&interface->dev, &dev_attr_lcd); |
| 545 | |
| 546 | dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n", |
| 547 | kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs); |
| 548 | |
| 549 | usb_kill_urb(kit->irq); |
| 550 | usb_free_urb(kit->irq); |
| 551 | usb_buffer_free(kit->udev, 8, kit->data, kit->data_dma); |
| 552 | |
| 553 | usb_put_dev(kit->udev); |
| 554 | kfree(kit); |
| 555 | } |
| 556 | |
| 557 | static struct usb_driver interfacekit_driver = { |
| 558 | .owner = THIS_MODULE, |
| 559 | .name = "phidgetkit", |
| 560 | .probe = interfacekit_probe, |
| 561 | .disconnect = interfacekit_disconnect, |
| 562 | .id_table = id_table |
| 563 | }; |
| 564 | |
| 565 | static int __init interfacekit_init(void) |
| 566 | { |
| 567 | int retval = 0; |
| 568 | |
| 569 | retval = usb_register(&interfacekit_driver); |
| 570 | if (retval) |
| 571 | err("usb_register failed. Error number %d", retval); |
| 572 | |
| 573 | return retval; |
| 574 | } |
| 575 | |
| 576 | static void __exit interfacekit_exit(void) |
| 577 | { |
| 578 | usb_deregister(&interfacekit_driver); |
| 579 | } |
| 580 | |
| 581 | module_init(interfacekit_init); |
| 582 | module_exit(interfacekit_exit); |
| 583 | |
| 584 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 585 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 586 | MODULE_LICENSE("GPL"); |